Professional Documents
Culture Documents
WELL NAME XMA # 06 Graha Elnusa
Jl. T.B. Simatupang Kav. 1 B, Cilandak, Jakarta 12560 Indonesia
Phone 62 21 7883 0850 (hunting) Fax. 62 21 7883 0882
SERVICE/RIG EHR # 08 corporate@elnusa.co.id www.elnusa.co.id
PERIOD
FISHING TOOLS SERVICE & PERSONNEL UTILISATION
START DATE: 28/11/2018 END DATE:
I. PERSONNEL
DECEMBER Operating
No. Qty Description Wells
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 days
1 1 EDY SUMANTRI PURBA O O O O O O O O O 9 1
II. EQUIPMENT
Operating Standby
No. Qty Description DECEMBER Wells
days days Remarks Serial Number
(a) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 (f) (g) (h)
A. OVERSHOT
5-3/4" OD Series 150 Overshot, with 5-7/8''OD Overshot SERIES 150 w/ 3-1/2 IF
7 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 Box Conn , c/w thread protector. (Max Catch
3-1/2" IF Box
5") O8ILA
8-1/8" OD Oversize Guide for 5-3/4" 8-1/2" OD Oversize Guide for 5-7/8" OD
10 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1
OD Overshot Overshot Series 150 GATLT
6 1 ea Spear Grapple 5.101" Nom. Catch S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 Spear Grapple Nom Catch 2.328 for 2-
5/16"OD Releasing Spear LM-T73
2-5/16" OD Tubing Spear with 2 ft.
12 1 ea Extended Mandrel, shouldered S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 2-5/16"OD Releasing Spear,w/2-3/8"Reg Box
Mandrel & 2-3/8" Reg. Box Conn,c/w Plastic Thread Protector S3AEK
1 ea 5-1/2" taper tap O S S S S S O S S S S S S S S S S S S S S S S S S S S S S S S 2 29 1 5-1/2" taper tap T81XJ
C. BUMPER SUBS, FISHING JARS AND JAR INTENSIFIERS
4-3/4" OD Lubricated Bumper Sub with 4-3/4" OD X 2" ID Mechanical Bumper Sub
7 1 ea O S S S O O O O O S S S S S S S S S S S S S S S S S S S S S S 6 25 1
3-1/2" IF Connections with 3-1/2" IF B x P conn B8IIW
D. MILLING TOOLS
8-1/2" OD Bladed Flat bottom Mills with 8-1/8'OD Skirted Mill w/ 4-1/2" IF Box
3 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1
4-1/2" Reg. Pin Connection c/w steel thread protector MAOSC
8-1/2" OD Rotary Shoe with 8-1/8" 8-1/2"OD X 7" ID Rough Rotary Shoe w/ 8-
3 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 1/8" FJWP Box Connection c/w steel thread
FJWP Box and Steel Thread Protector
protector NAU901
8-1/2" OD Rotary Shoe with 8-1/8" 8-1/2"OD X 7" ID Rough Rotary Shoe w/ 8-
3 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 1/8" FJWP Box Connection c/w steel thread
FJWP Box and Steel Thread Protector
protector NAU921
Lift Plug for 8-1/8" Washpipe w/8-1/8 FJWP
4 1 ea 8-1/8" Washpipe Lift Plugs S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 Pin x 3-1/2 IF Box Conn,c/w Plastic Thread
Protector HSUPS
Lift Plug for 8-1/8" Washpipe w/8-1/8 FJWP
4 1 ea 8-1/8" Washpipe Lift Plugs S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 Pin x 3-1/2 IF Box Conn,c/w Plastic Thread
Protector HSUPX
5 1 ea Elevators for 8-1/8" OD Washpipe S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 Elevator for 8-1/8" Washpipe HSXYG
6 1 ea Rotary Slips for 8-1/8" OD Washpipe S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1
Rotary Slip for 8-1/8" Washpipe HSXM5
Safety Clamp with Wrench for 8-1/8"
7 1 ea O O O O O O O O O S S S S S S S S S S S S S S S S S S S S S S 9 22 1
Washpipe Safety Clamp for 8-1/8" Washpipe HSX5Y
5-3/4" OD Washpipe with 5-3/4" FJWP
14 1 jts Connections and Steel Thread S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 5-3/4" OD WASH PIPE, w/ 5-3/4"FJWP B x P
Protectors Conn c/w Steel Thread Protector (Type A) NSN
5-3/4" OD Washpipe with 5-3/4" FJWP
14 1 jts Connections and Steel Thread S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 5-3/4" OD WASH PIPE, w/ 5-3/4"FJWP B x P
Protectors Conn c/w Steel Thread Protector (Type A) NSN
5-3/4" OD Washpipe with 5-3/4" FJWP
14 1 jts Connections and Steel Thread S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 5-3/4" OD WASH PIPE, w/ 5-3/4"FJWP B x P
Protectors Conn c/w Steel Thread Protector (Type A) NSN
5-3/4" OD Washpipe with 5-3/4" FJWP
14 1 jts Connections and Steel Thread S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 5-3/4" OD WASH PIPE, w/ 5-3/4"FJWP B x P
Protectors Conn c/w Steel Thread Protector (Type A) NSN
5-3/4" OD Washpipe with 5-3/4" FJWP 5-3/4"OD Washpipe Extension,w/5-3/4"FJWP
14 1 jts Connections and Steel Thread S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 Pin x Box Connection c/w steel thread
Protectors protector (Type A) E8U84
6" OD Rotary Shoe with 5-3/4" FJWP 6"OD Smooth OD Flat Bottom 4-3/4"RID
16 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 Rotary Shoe w/5-3/4"FJWP Box Conn,c/w
Box and Steel Thread Protector
Steel Thread Protector N8Uf3
6" OD Rotary Shoe with 5-3/4" FJWP 6"OD Smooth OD Flat Bottom 4-3/4"RID
16 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 Rotary Shoe w/5-3/4"FJWP Box Conn,c/w
Box and Steel Thread Protector
Steel Thread Protector N8U1U1
6" OD Rotary Shoe with 5-3/4" FJWP 6"OD Smooth OD Flat Bottom 4-3/4"RID
16 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 Rotary Shoe w/5-3/4"FJWP Box Conn,c/w
Box and Steel Thread Protector
Steel Thread Protector N8U2U1
6" OD Rotary Shoe with 5-3/4" FJWP 6"OD Smooth OD Flat Bottom 4-3/4"RID
16 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 Rotary Shoe w/5-3/4"FJWP Box Conn,c/w
Box and Steel Thread Protector
Steel Thread Protector N8U7U1
6" OD Rotary Shoe with 5-3/4" FJWP 6"OD Smooth OD Flat Bottom 4-3/4"RID
16 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 Rotary Shoe w/5-3/4"FJWP Box Conn,c/w
Box and Steel Thread Protector
Steel Thread Protector N8U801
5-3/4" OD Washpipe Drive Sub with 5-
15 1 ea 3/4" FJWP Pin by 3-1/2" IF Box and S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 5-3/4''OD Poorboy Moustrap ,w/5-3/4"FJWP
Steel Thread Protector Box Conn, c/w Steel Thread Protector NAU3U1
8-1/2" OD Rotary Shoe with 8-1/8" 8-1/2"OD X 7" ID Rough Rotary Shoe w/ 8-
3 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 1/8" FJWP Box Connection c/w steel thread
FJWP Box and Steel Thread Protector
protector NAU931
8-1/2" OD Rotary Shoe with 8-1/8" 8-1/2"OD X 7" ID Rough Rotary Shoe w/ 8-
3 1 ea S S O O O S S S S S S S S S S S S S S S S S S S S S S S S S S 3 28 1 1/8" FJWP Box Connection c/w steel thread
FJWP Box and Steel Thread Protector
protector NAU2Z
8-1/2" OD Rotary Shoe with 8-1/8" 8-1/2"OD X 7" ID Rough Rotary Shoe w/ 8-
1 ea O O O S S S S S S S S S S S S S S S S S S S S S S S S S S S S 3 28 1 1/8" FJWP Box Connection c/w steel thread
FJWP Box and Steel Thread Protector
protector NAU861
F. RENTAL TOOLS
5-3/8" or 5-1/4" OD Boot Baskets with 5-3/8" OD Boot Type Junk Basket w/ 3-1/2"
6 1 ea O O O O O S S S S S S S S S S S S S S S S S S S S S S S S S S 5 26 1 Reg Pin x Box conn, c/w plastic Thread
3-1/2" Reg. Connections
Protector J8K5b
6" OD Lead Impression Block with 3- 5-1/2"OD Impression Block,w/3-1/2 IF Box
11 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1
1/2" IF Box conn, c/w Plastic Thread Protector I8ISU
8" OD Lead Impression Block with 3- 8"OD Impression Block,w/3-1/2 IF Box conn,
12 1 ea O S S S S O O S S S S S S S S S S S S S S S S S S S S S S S S 3 28 1
1/2" IF Box c/w Plastic Thread Protector IAIC4
4-3/4" OD Crossover Subs, 2-3/8" IF 4-3/4" OD Body Crossover Sub Double Pin,
14 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 0 31 1 w/ 3-1/2 Reg Pin x 3-1/2 IF Pin, c/w plastic
Pin by 3-1/2" IF Box
Thread Protector X8K6F1
G. FISHING AND DITCH MAGNETS
H. CROSSOVER SUBS
6-1/4" OD Crossover Sub with 4-1/2" IF 6-1/2"OD body Crossover sub w/ 4-1/2 IF Pin
1 1 ea O O O O O O S O O S S S S S S S S S S S S S S S S S S S S S S 8 23 1 x 3-1/2"IF Box Conn, c/w Plastic Thread
Pin by 4" IF Box
Protector XAIm6
4-3/4" OD Crossover Sub c/w 2-7/8" IF 5"OD Body Crossover Sub,w/2-3/8"Reg Pin x
4 1 ea S S S S S S S S S S S S S S S S S S S S S S S S S 0 25 1 3-1/2"IF Box Conn,c/w Plastic Thread
Pin by 3-1/2" IF Box
Protector X8I78
4 3/4" OD Body Bit sub, 3-1/2 Reg Box
5 1 ea x 3-1/2 IF Box, c/w plastic Thread O O O O O O S O O S S S S S S S S S S S S S S S S S S S S S S 8 23 1 4 3/4" OD Body Bit sub, 3-1/2 Reg Box x 3-1/2
Protector IF Box, c/w plastic Thread Protector X8KU91
28-Nov-18
06:00-12:00 depart to pertamina for briefing .
Go to location XMA #06 with tag boat
12:00-23:00 arrrived on location XMA 06
disscussed with coyman about the partinent job.
Continue POOH w/8-1/2 rotary shoe to surface and lay down same.recovery
23:00-00:00 make up w/8" impression block
11/29/2018
00:00-07:00 Run in hole w/8" IB + 2 jts 4-3/4 DC to 84 jts 3-1/2" DP
compress string to 6000 lbs to get mark on bottom. 2666.55 ft.
07:00-12:00 POOH w/8" IB to surface.get 2 item mark length hole 5-1/2 in + 0.5 in depth h
12:00-!13:00 disscuss with companyman abut the next job plan.
13:00-00:00 Make up 5-1/2"taper tap + 4-3/4 bumper sub 4-3/4 fishing jar + 7 jts 4-3/4 DC
RIH with 3-1/2" DP to 2664.55 ft
11/30/2018
00:00-10:00 R/U power swivel and install 2" kelly hose.
pump 20 bbls hivis.don string toto sting in fish w/2 klbs while turn right rotary
with 2-10 klbs while turn right rotary 1100-1500 torque or 500 -600 psi.indica
2666.55 ft.pick up stringand get overpull 10 klbs 64 klbs fish losses.go to nor
attempt to down string 2-10 klbs.attempt to down string while turn rotary to 2
latch.pick up string to 60 until to 100 klbs fish losses.try this methode at seve
attemtp to don string to 30 klbs turn rotary until toqrque up to 3 klbs.pick up s
down string to 30 klbspick up to 60 klbs and hold three time no indication to
todown string to 30 klbs and turn rotary until torque up to 3000 ft/lbs and pic
no indication to latch.attempted to down string to 30 lbs,turn right rotary 3 tim
klbs string losses.try this methode several time.no success to latch fish
to 70 klbs.get fis loses.no success
10:00-12:00 disconnect power swivel and kelly hose.POOH with 5-1/2" OD body taper tap
12:00-20:00 continue POOH w/5-1/2 OD body taper tap from 217.21 to surface.recovery
20:00-00:00 Discuss with company man abotu the next job.
remove top sub from taper tap.unsuccess.bring taper tap + top sub to tekun
used grinding and cutting tost to remove top sub from taper tap,
12/1/2018
00:00-08:30 RIH back 5-1/2 taper tap + 4-3/4 bumper sub + 43/4 fishing jar + 7 jts 4-3/4 d
2666.19 ft + 3-1/2" pup joint .p/u string 53 klbs and s/o string 38 klbs
instal power swivel and 2" kelly hose.pump hivis 20 bbls.
08:30-11:00 down slow string from 2 - 10 klbss several time ( indication latch ,string dow
Pick up string and get overpul 47 klbs ( 100 klbs ) string losses. Get to norm
string.increse 3 ft depth from marked before.
11:00-12:00 discuss with coyman for the next job.
12:00-19:30 POOH with 5-1/2"body taper tap to 268.48 ft 77 jts 4-3/4" intensifier jar + 6 jts
4-3/4" bumper sub + 5-1/2" OD taper tap.no recovery
19:30-00:00 prepare 8-1/2 rotary shoe on top deck.make up and RIH with 8-1/2" OD rota
8-1/8"drive sub + x/o 3-1/2"IF p x 3-1/2" IF b + bit sub 3-1/2" REG b x 3-1/2 I
12/2/2018
00:00-03:00 Continue RIH w/8-1/8" rotary shoe from 1649 ft to2666.77 ft 77 jts 3-1/2" DP
Burning oover from 2666.77 initial dept to milling with 2-3 klbs WOB40-44 rp
03:00-16:30
psi,rotary torque 2500- 3000 lbs/ft mean while pump hivis 5 bbls 8.9 ppg visc
milling job progress 3.30 ft ft form 2666.77 to 2670.07 ft
anf rotary push down to initial depth 2666.77
16:30- 00:00 continue burning over with 2-3 klbs WOB,40-44 rpm,rotary pressurre 1100-1
milling job progress 0.6 ft comulative and total progress 3.90 ftand get depth
pump 5 bbls hivis and rturn to CF + oil contaminationto mud tank
12/3/2018
00:00-01:30 Continue burning over with 2-3 klbs WOB 40-44 rpm,2500 - 3000 lbs rtq.pum
milling progress 0.4 ft and progress 4.30 ft from initial depth. 2671.07ft
01:30-02:30. stop rotary and pick up string to 3 ft and get over[pull ( 16 klbs ) to 1 ft to get
down string to 2668.07 ft.increase 3 ft depth from cummulative progres @26
ttime and get overpull 16 klbs and losses string 21 klbs.
02:30-04:00 continue burning over with 2-3 klbs WOB,40-44 rpm,rotary pressurre 1100-1
stop rotary and pick up string to 3 ft and get over[pull ( 3 klbs ) to 1 ft to get in
down string to 2668.07 9( increase 3' from 26071.07'.try this methode at sev
3 klbs.
04:00-09:30 continue burning over with 2-3 klbs WOB,40-44 rpm,rotary pressurre 1100-1
2500 - 3000 ft/lbs while circulate w/5 bpm 200 psi.initial depth @2666.77 ft,m
cummulative progress 4.3 ft from 2666.71 ft to 2671.07 ft.p/u string 3 ft.get o
fishes losses when string up to 26 klbs overpull.
09:30-15:00 POOH w/ 8-1/2"Odflush 7"ID rough rotary shoe to 256.23 ft ( 77 jts 3-1/2 DP
15:00-16:00 Lay down 7 jts 4-3/4"DC +ext w/pipe + drive sb + junk basket + 8-1/2" rotary
recovery 65 % worn out rotary shoe.
16:00-18:00 prepare 8-1/2 rotary shoe on top deck.make up and RIH with 8-1/2" OD rota
w/pipe.
18:00-18:30 crew change and PJSM
18:30-00:00 RIH 8-1/2"OD flush 7"ID rough rotary shoe to1805 ft on total 50 jts 3-1/2 " D
12/4/2018
00:00-02:00 continue RIH 8-1/2" rotary shoe from 1805 ft to 2667.82 ft ontotal 77 jts 3-1/2
02:00-04:00 p/u string 54 klbs and s/o string 38 klbs,install power swivel and 2" kelly hose
pump on to circulation w/4 bpm 100 psi and sweep hivis 10 bbls.
burning over f/ 2667.82 ft to2669.62 ft,rotary torq 2500 - 3000 lbs
parameter: 2--3 klbs mill wt, pump pressure 200 psi.pump 5 bbls hivis every
stop rotary,found over torque to 4000 lbs get overpull18 klbs ( 72 klbs ) get s
04:00-06:00 down string slow to2667.82 ft ( string not pass on bottom 2669.62 Ft )indica
continue burning over from 2667.82 ft 2-3 klbs wob pump pressure 200 pirt
every 2 hrs
06:00-00:00 Crew change and PJSM
Continnue burning over from 2670 ft to2670.50 ft .withh parameter 2-3 klbs W
pressure,20-3 klbs torque
stomp pump to make sure progress and over torque several time.
12/5/2018
00:00-04:30 continue burning over from 2670 w/2-3 klbs wob 2500 - 3000 torque 2670.05
lower string to 2674.52 ft.indication rotary shoe pass by 9-5/8"grap dual pack
04:30-06:00 circulation bottoms up one time and pump direct hivis 5 bbls.with 5 bpm 200
06:00-06:30 Crew change and PJSM
06:30-17:00 POOH with 8-1/2 rotary shoe to surface.recovery gram 4 kg on junk basket +
17:00-18:00 Break out BHA + 8-1/2" rotary shoe
18:00-18:30 crew change and PJSM
18:30-20:00 discuss with coyman to the next plan.
20:00-00:00 make up 8-1/8" mouse trap and + 8-1/8 ext w/pipe + 8-1/8 drive sub + x/o4-1
3-1/2 ifP x 3-1/2 reg P + bit sub 3-1/2 reg B x 3-1/2 pB + 4-3/4 bumper sub +
7 jts 4-3/4 DC on25 jts 3-1/2 DP at 1043 ft .
12/6/2018
00:00-00:30 Crew change and PJSM
00:30-04:30 continue RIH 8-1/8 mouse trap on 78 jts 3-1/2 DP from 1043 ft to 2687.15 ft.
tag bottom@2687.15
04:30-06:00 p/up string 2 ft.pump w/10 bbls hivis 3bpm 100 psi.tag and latch 2 ft graduall
no overpull.attemted to tag and latch fish several time as gradually and pick
w/2 bpm 100 psi down string 2 klbs and turn right 1 time rotary to guide mou
success.
06:00-08:30 crew change and pjsm.continue to reach fish on bottom with pump on2 bpm
2 klbs turn on rotate to guide mouse trp pass on fishh.keep down to 25 k.p/u
to catch.no success.
SHIFT PERSONNEL INFORMATION ON
DAY SHIFT PERSONNEL NAMES
LOCATION:
OIL COMPANY REPRESENTATIVE: Aris luqman T
HWU SUPERINTENDENT luky kasenda
ELNUSA-PBE Edy sumantri purba
08:30-17:00 POOH w/8-1/8 mouse trap to surface.no recovery.get small mark on mouse
17:00:-18:00 make up 8" impression block
18:00-18:30 crew change and PJSM
18:30-00:00 RIH 8" impression block +2 jts 4-3/4" DC on 70 jts 3-1/2 DP @2252 ft
12/7/2018
00:00-01:30 continue RIH 8"IB from 2252 to @ 2674.75 ft ( tagged bottom)
01:30-02:00 circulation hole hondition w/2 bpm 100 psi 25 bbl total pump.compress IB to
02:00-10:30 POOH w/8" IB and the same string.recovery get mark drawing 1/2 circle size
10:30-12:00 lay down 8" IB and BHA to deck.disscuss with coyman for the next job plan.
12:00-18:00 Make up and RIH with 5-1/2 OD taper tap + 3 jts 3-1/2" DP + 4-3/4" bumper
6 jts 4-3/4" DC + 4-3/4" intensifier jar on 50 jts DP 1860 last depth.
18:0018:30 crew change and PJSM
18:30-20:30 Continued RIH 5-1/2'taper tap from 1860 ft to 2642 ft on total 75 jts 3-1/2 DP
20:30-00:00 install kelly hose and connect with string and down string without pump and t
break out kelly hose.connect to the pup joint in the ground.pick up to rig floor
slow down string to 2672 with slow rotate to 2685 ft.p/u string,get overpull 22
( normal
normal wt 53 klbs.attempt to down string to 2685 ft several time.p/u string an
and drop
hold string to normal
aminute.p/up wt.attempt
string slow to down
to 15 klbs string to 2685
overpull.string drop fttoseveral
normaltime.us
wt.dow
torque 2500 lbs/ft.hold aminute.p/upstring get overpull 10 klbs several time.s
string to make
in weight sure for indication
indicator.disscus of increasing
with coyman to get of
jobstring
plan.wt.found 500 lbs
12/8/2018
00:00-06:00 POOH with 5-1/2 OD taper tap to 455 ft 72 jts 3-1/2 DP.keep well full for wel
06:00-06:30 crew change and PJSM
06:30-08:30 continued POOH w/5-1/2 mouse trap body to surface.no recovery.
08:30-12:00 discuss with coyman and rig superintendent for the nex job plan
12:00-20:00 RiIH w/8-1/8" mouse trap catch range 2-7/8", 2-5/8", 2-1/2" + 81/8 extention
drive sub basket + bit sub + 4-3/4 bumper sub + 4-3/4" fishing jar + 7 joints 4
intensifier on 77 + 10 ft p/jt 3-1/2 DP at 2875 ft
down string and compres to 10 klbs,p/u string slow to 65 klbs overpull11 klb
20:00-23:00
compres,indication
klbs,p/u string to 75fish
klbslatch on mouse
.indication fish trap
latch on mouse trap.work pipe two tim
work pipe to make fish free 4 time.attempt to p/u string to 95 klbs.work on pip
to normal string 53 klbs.down string to 15 klbs.pick up string 4 ft get overpul
normal wt 53 klbs. Attempt to down string to 15 klbs and pick up 4 feet.get st
several time.no success
23:00-00:00 POOH with 8-1/8 mouse trap to 2674 ft 10 jts 3-1/2 DP
12/9/2018
00:00;00:02 Hard rain and hard winsstop POOH for safey instruction.
02:00-06:00 Contd POOH 8-1/8 mouse trap from 2674 ft to 2421 ft 75 jts 3-1/2 DP.fil up h
06:00-08:30 contd POOH 8-1/8 mouse trap from 2421 to surface on total 78 jts 3-1/2 DP
no recovery.found on hook mouse trap large of size gide shoe.2-7/8 to 3-1/2
3-1/3.disscuss with coyman for the next job plan..
SHIFT PERSONNEL INFORMATION ON
DAY SHIFT PERSONNEL NAMES
LOCATION:
OIL COMPANY REPRESENTATIVE:
HWU SUPERINTENDENT
ELNUSA-PBE Lery Lonar Rambing
OPERATIONAL CHARGEABLE DA
RSONNEL NAMES NIGHT SHIFT PERSONNEL NAMES
DATE JOB BEGAN:
uharto Suharto DATE JOB FINISHED:
ani dwi Imam wahyudi SUPERVISOR DAYS:
mantri purba Edy sumantri purba OPERATION DAYS:
OPERATIONAL CHARGEABLE DA
RSONNEL NAMES NIGHT SHIFT PERSONNEL NAMES
DATE JOB BEGAN:
uharto Suharto DATE JOB FINISHED:
ani dwi Imam wahyudi SUPERVISOR DAYS:
mantri purba Edy sumantri purba OPERATION DAYS:
OPERATIONAL CHARGEABLE DA
RSONNEL NAMES NIGHT SHIFT PERSONNEL NAMES
DATE JOB BEGAN:
uqman T Aris luqman T DATE JOB FINISHED:
kasenda Dani dwi SUPERVISOR DAYS:
mantri purba Edy sumantri purba OPERATION DAYS:
1/2 DP
OPERATIONAL CHARGEABLE DA
RSONNEL NAMES NIGHT SHIFT PERSONNEL NAMES
DATE JOB BEGAN:
uqman T Aris luqman T DATE JOB FINISHED:
kasenda Dani dwi SUPERVISOR DAYS:
mantri purba Edy sumantri purba OPERATION DAYS:
truction.
421 ft 75 jts 3-1/2 DP.fil up hole for wellcontrol.
ace on total 78 jts 3-1/2 DP
ize gide shoe.2-7/8 to 3-1/2' , 2-5/8 to2-7/8 ,2-1/2 to
..
OPERATIONAL CHARGEABLE DA
RSONNEL NAMES NIGHT SHIFT PERSONNEL NAMES
DATE JOB BEGAN:
DATE JOB FINISHED:
SUPERVISOR DAYS:
nar Rambing Lery Lonar Rambing OPERATION DAYS:
OPERATIONAL CHARGEABLE DA
RSONNEL NAMES NIGHT SHIFT PERSONNEL NAMES
DATE JOB BEGAN:
DATE JOB FINISHED:
SUPERVISOR DAYS:
nar Rambing Lery Lonar Rambing OPERATION DAYS:
ELNUSA ARTIFICIAL LIFT SERVICES
OPERATIONAL CHARGEABLE DA
RSONNEL NAMES NIGHT SHIFT PERSONNEL NAMES
DATE JOB BEGAN:
DATE JOB FINISHED:
SUPERVISOR DAYS:
nar Rambing Lery Lonar Rambing OPERATION DAYS:
8" 1.18 ft
4-3/4 DC 29.83.ft
4-3/4 DC 30.11 ft
- 6.10 ft
ength BHA 55.02 ft
5-1/2" 3.53 ft
4-3/4" 4.45 ft
4-3/4" 6.99 ft
4-3/4" 217.21 ft
4-3/4" 10.42 ft
- 6.10ft
ength BHA 236.50 ft
5-1/2" 3.53 ft
4-3/4" 4.45 ft
4-3/4" 6.99 ft
4-3/4" 217.21 ft
4-3/4" 10.42 ft
- 6.10ft
ength BHA 236.50 ft
ONAL CHARGEABLE DAYS TOTAL BBL's PUMPED: 0.00
28 november 2018 TOTAL PDM ROTATING HOURS:
DAYS
DAYS
VICES
8-1/2" 5.51 ft
8-1/8" 10 ft
8-1/8" 3.30 ft
3-1/2 x 4-1/2 2.05 ft
3-1/2x3-1/2 3.05 ft
5-3/8" 3.63 ft
3.04 ft
217.21 ft
- 6.10 ft
ength BHA 241.69 ft
8-1/2" 5.51 ft
8-1/8" 10 ft
8-1/8" 3.30 ft
3-1/2 x 4-1/2 2.05 ft
3-1/2x3-1/2 3.05 ft
5-3/8" 3.63 ft
4- 3/4" 3.04 ft
4- 3/4" 217.21 ft
- 6.10 ft
ength BHA 241.69 ft
ONAL CHARGEABLE DAYS TOTAL BBL's PUMPED: 0.00
28 november 2018 TOTAL PDM ROTATING HOURS:
DAYS
DAYS
VICES
8 - 1/8" 7 3.67 ft
8 - 1/8" 10 ft
8- 1/8" 3.30 ft
4- 3/4" 3.04 ft
4- 3/4" 4.45ft
4- 3/4" 6.99 ft
4- 3/4" 217.21 ft
- 6.10 ft
242.56 ft
ONAL CHARGEABLE DAYS TOTAL BBL's PUMPED: 0.00
28 november 2018 TOTAL PDM ROTATING HOURS:
DAYS
DAYS
VICES
8" 1.18 ft
4-3/4 DC 29.83.ft
4-3/4 DC 30.11 ft
- 6.10 ft
ength BHA 55.02 ft
5-1/2" 3.53 ft
3-1/2" 93.13 ft
4-3/4" 4.45 ft
4-3/4" 6.99 ft
4-3/4" 180.64 ft
4-3/4" 10.42 ft
- 6.10 ft
ength BHA 288.28 ft
8 - 1/8" 7 1.98 ft
8 - 1/8" 10 ft
8- 1/8" 3.30 ft
4- 3/4" 3.04 ft
4- 3/4" 4.45ft
4- 3/4" 6.99 ft
4- 3/4" 217.21 ft
- 6.10 ft
242.56 ft
DAYS
DAYS
VICES
DAYS
DAYS
VICES
DAYS
DAYS
VICES
TUBING EVENT / INFORMATION PUMPING DETAILS PRESSURE
P-U-W H-U-W H-U-D RATE Mud Motor C-T-U
Lbs Lbs Feet Bbl/Min Rotating Hrs PSI
DAYS
DAYS
VICES
ING PURPOSES
110/EP2172/XMA-
06/2018-S1
28 december 2018
DAYS:
Inches:
Feet:
Lbs:
Inches:
PRESSURE
W-H-P
PSI
BBL's
Hours
TIVE SIGNATURE
PRESSURE
W-H-P
PSI
BBL's
Hours
TIVE SIGNATURE
PRESSURE
W-H-P
PSI
BBL's
Hours
TIVE SIGNATURE
PRESSURE
W-H-P
PSI
BBL's
Hours
TIVE SIGNATURE
PRESSURE
W-H-P
PSI
BBL's
Hours
TIVE SIGNATURE
PRESSURE
W-H-P
PSI
BBL's
Hours
TIVE SIGNATURE
PRESSURE
W-H-P
PSI
BBL's
Hours
TIVE SIGNATURE
PRESSURE
W-H-P
PSI
BBL's
Hours
TIVE SIGNATURE