Professional Documents
Culture Documents
Thank you for purchasing a Fendt camper, which will be your dependable companion for the most
enjoyable days of the year for many years to come.
Thanks to our many years of experience in the construction of leisure vehicles we are able to react
innovatively to current market conditions and demands.
Driving safety and comfortable living are, and have always been, indispensible elements of our product
philosophy.
The name Fendt-Caravan has stood for high quality manufacturing for many decades now.
You will also be able to benefit from a dense network of dealer service points throughout Europe. Take
advantage of your authorised dealer‘s experience and technical knowledge - we recommend speaking
to him in detail before taking your first trip with your Fendt camper.
Please read this manual carefully to ensure that you use your vehicle correctly.
The best proof of our particularly quality-oriented philosophy is the Fendt camper long-term guarantee
against leaks in the camper connections. By having annual inspections carried out by an authorised
Fendt camper dealer this guarantee can be extended to cover a period of up to five years after you
take delivery of the vehicle.
Fendt‘s employees wish you many enjoyable trips and hope you will always have a safe journey with
your new Fendt camper.
Fendt-Caravan GmbH
Table of Contents
1 Introduction...............................................................................................................01-1
1.1 General information............................................................................................01-1
1.2 Markings in these operation instructions............................................................01-2
2 Safety.........................................................................................................................02-1
2.1 General information............................................................................................02-1
2.2 Before the drive..................................................................................................02-3
2.3 Loading...............................................................................................................02-5
2.4 Handling Performance........................................................................................02-7
2.5 After the drive.....................................................................................................02-9
5 Exterior structure.....................................................................................................05-1
5.1 Ventilation and De-aerating................................................................................05-1
5.2 External entry......................................................................................................05-3
5.3 Service flap.........................................................................................................05-5
5.4 Toilet flap.............................................................................................................05-5
5.5 Gas-bottle container flap....................................................................................05-6
5.6 Roof and roof rail................................................................................................05-7
5.7 Guide rail for outer tent . ....................................................................................05-7
5.8 Bicycle carrier ....................................................................................................05-8
5.9 Subsequent installation of an awning.................................................................05-9
5.10 Rear ladder, roof and roof rail...........................................................................05-10
6 Interior structure.......................................................................................................06-1
6.1 Opening and closing doors and flaps.................................................................06-1
6.2 Extendable media oval ......................................................................................06-2
6.3 Converting the seating arrangement into a bed ................................................06-3
6.4 Bunk beds .........................................................................................................06-7
6.5 Windows.............................................................................................................06-9
6.6 Roof bonnets....................................................................................................06-10
7 Installation of electrical devices.............................................................................07-1
7.1 Safety tips...........................................................................................................07-1
7.2 Control panels.....................................................................................................07-2
7.3 Electrical supply..................................................................................................07-5
7.4 Circuit diagram for lighting in the vehicle 12V 13-pole . ....................................07-8
7.5 Lighting in the camper......................................................................................07-10
7.6 Electric floor heating.........................................................................................07-15
7.7 Microwave / Oven . ..........................................................................................07-16
7.8 Air-conditioning.................................................................................................07-16
7.9 Radio/CD device . ............................................................................................07-16
7.10 Prewiring for antenna........................................................................................07-16
8 Water.........................................................................................................................08-1
8.1 Water supply.......................................................................................................08-1
8.2 Warm water supply via Truma-Therme ..............................................................08-3
8.3 Cassette toilet . ..................................................................................................08-5
9 Gas ............................................................................................................................09-1
9.1 General safety rules for the use of liquid gas facilities.......................................09-1
9.2 Gas supply..........................................................................................................09-3
9.3 Hot-air heating....................................................................................................09-5
9.4 Refrigerator.......................................................................................................09-10
9.5 Gas cooker.......................................................................................................09-12
9.6 Oven.................................................................................................................09-13
10 Accessories...............................................................................................................10-1
13 Technical data...........................................................................................................13-1
13.1 Tire pressure values............................................................................................13-1
13.2 Technical data....................................................................................................13-2
13.3 Basic equipment................................................................................................13-5
13.4 Lighting...............................................................................................................13-6
Index .............................................................................................................................Ix-1
1. Introduction
Our campers are continuously being further de-
veloped. Please understand that we reserve the
right to make changes to their equipment, shape
and technology. Therefore, Fendt shall not be
liable for any claims arising from the contents of
this handbook. The equipment used at the time
of printing is described in this handbook and
should be transferred accordingly to the layouts
of all the different camper variations. Please
understand that we cannot describe all of the
individual variations. Your dealer will be pleased
to answer any special questions regarding the
equipment and technology of your camper.
1.1 General information Your Fendt camper has been built in accordance
with the latest technology and recognised safety
regulations. Despite all of these safety measures,
it is possible that people may be hurt or the
camper damaged if the safety instructions in this
handbook and the warnings posted on adhesive
labels in the camper are not followed.
01-1
1.2 Markings in these operation instructions
Lists
- Lists are based on key points and are pre-
ceded by a dash.
Procedural guidelines
• Procedural guidelines are also based on key
points and begin with a bullet point.
Guidelines
Guidelines point out important details
which ensure the trouble-free function
of the camper and its equipment.
Please bear in mind that various
models have different equipment;
therefore, varying descriptions are
possible.
Warnings
Warnings point out dangers which, if
they are not followed, could cause
damage to equipment and/or injury
to persons.
Environmental tips
01-2
2. Safety
Emergency equipment
To be prepared for an emergency, you need at
least three basic items of rescue equipment (first
aid kit, warning triangle and fire extinguisher)
which you should carry at all times and know
how to use.
100 m
02-1
Fighting a fire
• Evacuate all passengers immediately.
• Close the main shut-off valve on the gas
bottle as well as the shut-off valves on gas-
powered appliances.
• Shut off the electrical supply
• Sound alarm and call the fire department.
• Only fight the fire yourself if this is possible
without risk.
Smoke detector
Please observe the manufacture‘s
operating instructions.
Test
Press the test button for at least 4 seconds until
the alarm goes off. This will activate a self-test
program. The alarm goes off when the electronic
system (horn and battery) is working.
Evacuation plan
Hold a meeting with your family to discuss the
possibilities for evacuating the camper. Everyone
who uses the camper should know what to do in
case fire breaks out.
02-2
What to do when the alarm goes off?
Leave the camper immediately, either through
the door or a window, depending on where the
fire has broken out, following the evacuation plan
you have discussed. Every second counts! Do
not waste any time getting dressed or packing
your valuables, etc.As soon as you are outside
the camper, keep moving until you are a safe
distance away from it. Notify the fire department
immediately from a neighbour‘s telephone or
use your cell phone. Do not, under any circum-
stances, go back inside the burning camper.
Shout loudly to warn any neighbouring campers
parked within the safety zone. Do not enter the
camper until the fire department has given you
permission to do so.
Exterior
Go around the carriage and prepare for the drive
as follows:
02-3
• Turn the front landing wheel up into its correct
position (see picture), then lock and secure it.
• Close gas bottles (heating is forbidden while
driving).
• Empty the waste water tank.
• Close gas bottle compartment.
• Adjust outer mirrors on base vehicle.
• Check camper's tire pressure (see tire
pressure table).
• Close all windows.
• Close the service flaps.
• Close and firmly lock roof bonnet.
• Shut off the light on the outer tent.
• Close and secure entry door.
• If necessary, pull the electrical cord to the
230 V mains supply out of the exterior socket.
• If necessary, pull the television antenna in-
ward as far as possible or fold over the satel-
lite dish.
• If necessary, secure all bicycles and lash them
to prevent slippage, ensuring that they do not
cover any lighting equipment.
• In winter, the roof must be free of snow and
ice before you begin to drive.
Interior
You must also prepare the interior of the vehicle.
02-4
• Close all doors (incl. refrigerator door),
drawers and flaps tightly.
• Latch the sliding door.
• Lower table and secure it.
Staying in the camper during the
drive is prohibited by law!
02-5
Stowage areas in the camper
- Light objects j such as towels and light-
weight laundry.
1 - Medium-weight objects k such as clothing,
laundry and food.
2 - Heavy objects l such as the outer tent,
boat motor or crates of drinks.
3
If the camper has been fitted with a bicycle car-
rier on the drawbar, the increase in the drawbar
load caused by the weight of the bicycles must
be counterbalanced by the rest of the load.
Drawbar load
You will only achieve optimum driving stability
and decisively increase your safety on the road if
the drawbar load has been properly adjusted for
your combination of base vehicle and the cam-
per being pulled. The drawbar load indicates the
power the camper's drawbar exerts on the car's
clutch.
02-6
2.4 Handling Performance Driving
Take a test drive or a safety training course be-
fore the first long drive to better acquaint your-
self with the carriage in driving conditions.
02-7
Brakes
A trailer carriage behaves differently from an
individual vehicle while braking. Therefore, it is
advisable (especially for inexperienced drivers)
to conduct several braking tests on a suitable
surface. The braking distance for a carriage is
longer than that of an individual vehicle. The load
in the caravan also has a significant influence on
the braking distance.
Driving in reverse
Your Fendt camper has a braking system with
automatic reverse. This makes driving in reverse
possible without activating the overrunning
brake. However, in addition to rolling resistance,
the residual brake force must first be overcome.
The next time the camper moves forward the
braking system will work normally again.
02-8
Shunting
Your carriage is significantly larger than a car.
02-9
Redirecting electrical devices
Rules for redirecting electrical devices
• Open the main shut-off valve on the gas
bottle as well as the shut-off valves on the
gas-powered appliances you require.
• Redirect the refrigerator from 12 V to gas or
230 V; otherwise, the battery of the base
vehicle could be depleted.
Water installation
The water supply system corresponds
at least to the state of the art as of
10/2007 (Directive 2002/72/EC).
02-10
3. Undercarriage and vehicle registration
3.1 General information Frame parts and axles are components of the
undercarriage. No technical modifications are
allowed; otherwise, the terms of operation are no
longer valid!
Recommended lubricant
multi-purpose grease in accordance with DIN
51825 KP2 G 30
03-1
You can find further guidelines in the
operating instructions from the axle
supplier.
03-2
To operate
Condition on delivery
Clutch grip (Fig. 10/Pos. j )
Stabilizing lever (Fig. 10/Pos. k)
Preparing to hitch or unhitch
To hitch or unhitch, the stabilizing lever (Fig. 11/
Pos. k ) must be in an upright position (open).
Bild./Fig. 10
To hitch
Bild./Fig. 11
Ball-shaped coupling
To open the ball-shaped coupling: pull the clutch
grip (Fig. 12/Pos. j ) upwards in the direction of
the arrow. The coupling mechanism has an open
position, i.e. as long as the AKS 2004/AKS 3004
has not been attached to the ball the clutch grip
will stay open. Attach the open coupling to the
drawbar ball of the base vehicle. You must now
hear the clutch grip relock itself in the original
position.
Stabilizing device
The AKS 2004/AKS 3004 is hitched to the cou-
pling.
Bild./Fig. 12
Press the stabilization grip down as far as it will
go (Fig. 13/Pos. k ) until it passes the point
where it locks into place.
To unhitch
To unhitch the camper from the base vehicle,
carry out the steps described above in the re-
verse order:
Pull the stabilization grip up as far as it will go
(upper final position of the stabilizing lever).
Open the clutch grip and lift AKS 2004/ AKS
3004 off the ball of the base vehicle.
Use a support wheel for easier hitching and un-
hitching if the drawbar load is heavier.
Bild./Fig. 13
03-3
The friction pads (Fig. 14/Pos. j ,
kl , ) press against the coupling
ball to generate a damping torque
that prevents rocking.
Therefore, the friction pads are sub-
ject to wear. The friction pads have
a buffer, giving them a high wear
lifespan.
03-4
both worn out.
- Coupling ball is new (diameter of 50), but
k
shells of friction pads (Fig. 14/ Pos. ) and
l ) of the AKS 2004/AKS 3004 are comple-
tely worn out.
• Determine the diameter of the coupling ball in
order to deduce how much the shells of the
Bild./Fig. 18
friction pads of the AKS 2004/AKS 3004 are
worn out (diameter of ball may not be less
than 49 mm).
03-5
Bild./Fig. 21 Important instructions for maintenance
and cleaning
Grease and other residue must be removed from
the coupling ball on the base vehicle. Suitable
products include:
• thinners
• ethyl alcohol
• brake cleaners
Otherwise, the stabilizing effect will be greatly
reduced.
Greasing
Should it become necessary to grease the
movable components (coupling mechanism and
setbolts) the following must be observed (Fig.
21):
• Clean all parts thoroughly.
Bild./Fig. 23 • The surfaces may only be coated with a thin
film of grease or oil.
• Lubricant: multi-purpose grease in accor-
dance with DIN 51825.
Bild./Fig. 25
03-6
Noises while driving
Generally, the friction pads of the AKS 2004/AKS
3004 do not make noises! Any clicking, creaking
and screeching noises could be caused by the
following:
• foreign matter or dirt between the friction pad
and the drawbar ball
• dry operation of the drawbar/tie rod in the
bushings of the overrun coupling
• drawbar ball on the base vehicle can be re-
moved and there is too much tolerance in the
lock mechanism
• surface coating has not been removed from
drawbar ball (grease, galvanised, Dacomet,
varnish, KTL or any other coating)
To eliminate
• Clean the drawbar ball and the friction pads
by lighting sanding the pads with sandpaper
(grain: 100-120).
• Use the lubricating nipple to grease the bu-
shings. In addition, pull the gangway bellows
on the overrun coupling off towards the front
and grease all of the exposed drawbar (Fig.
25).
• Lubricant: multi-purpose grease in accor-
dance with DIN 51 825.
• Take the camper to an authorised specialist
company. Have the contact surfaces checked
for damages and the lock mechanism che-
cked that it is functioning correctly. If neces-
sary, replace the drawbar ball or, if permitted,
regrease the lock mechanism (please refer
also to the operating manual for the remova-
ble drawbar ball).
03-7
Parking the carriage
When parking the carriage, the locking brake of
the camper must be activated.
To lock
• Pull the locking brake lever upward by the
handle j until it locks into place. The locking
brake lever is pressed into the final position
by the gas pressure spring.
To release
• Press the locking brake lever back into the
original position.
a) Hand brake
• Pull the hand brake lever and check that it
has room to move freely
• Check the condition of the pneumatic spring
• Check the condition of the spring brake
03-8
e) Contact-breaking cable
• Check the ring of the contact-breaking cable,
located on the hand brake lever
• Check the condition of the cable guide
• Check the condition of the snap hook
• Check the condition of the cable
Brakes
The brake linings are wear and tear parts. The-
refore, their condition must be checked at least
every 10,000 km, but no later than once every
year. If the overrun travel of the drawbar is more
than 60%, it is necessary to adjust it sooner. This
is caused by heavy use: the technically permis-
sible maximum weight is utilised 100% and/or
frequent uphill drives.
03-9
Brakes should be checked the first time after
driving 700-1200 km, but no later than after
the first 6 months!
• Check the settings of the brake system
• If necessary, have the brake system adjusted
• For standard axles, check the axial end play
of the wheel hub bearings
03-10
3.6 Vehicle registration Every vehicle which uses public roads is subject
to registration. This includes your new camper.
You can register the camper at your local regis-
tration office.
The following documents are required to initiate
the registration process:
03-11
3.8 Fit for a Speed of 100 km/h
1. Your Fendt camper is technically equipped for a maximum speed of 100 km/h. Under no
circumstances may this speed be exceeded!
2. Note the permissible maximum speeds for trailer carriages in the country in which you are
travelling!
3. Road traffic regulations in Germany were changed on 22 October 2005. Your camper was
already set to a speed of 100 at the factory, and this has been entered in the camper's
registration documents. Upon request, the 100 km/h sticker will be issued by the road traffic
authority when the camper is initially registered and attached to the back of the vehicle.
4. The following points must be observed, because you are responsible for adhering to them. If
they are not met, the maximum speed for the camper is no more than 80 km/h!
a) The base vehicle must be equipped with an anti-locking system/anti-lock device and may
not exceed an overall mass of 3.5 tons.
b) The camper must be equipped with hydraulic vibration dampers (shock absorbers);
naturally, your new Fendt camper is equipped with these.
c) The camper's tires may be no more than six years old. They must be marked at least with
an L (= 120 km/h) for the appropriate speed category.
d) The camper must be equipped with a stabilising unit in accordance with ISO 11555-1
The overall mass of the camper may not exceed the unladen mass of the car.
You are responsible for ensuring that the preceding regulations are met if you plan to drive at
100 km/h. Should this not be the case, the maximum speed in Germany is 80 km/h!
03-12
3.9 Definition of mass Definition of masses (weights) for
campers
3. Basic equipment
The basic equipment consists of all objects and
fluids which are necessary for the safe and pro-
per use of the vehicle. These include the masses
for gas, water and electrical supply (see Item
13.3 for a detailed specification).
4. Additional load
The additional load is the difference between
the "gross vehicle weight rating minus the mass
in running order". The remaining additional load
must be large enough to cover the weights of
possible additional equipment and personal
equipment.
5. Additional equipment
Additional equipment includes all items not part
of the standard equipment preinstalled in the
Fendt factory or by the dealer. This also includes
installations by special request.
The mass in running order refers to the vehicle
as originally equipped by the dealer or factory.
This increases accordingly if special equipment
is installed.
Before the first use, we recommend that you
weigh your vehicle on a calibrated vehicle scale.
In this manner, you can determine the maximum
permissible additional load for your vehicle.
03-13
If you are not sure whether you have
overloaded the vehicle, weigh your
vehicle on a public vehicle scale.
03-14
4. Wheels, tires
4.1 Tires Only use those tires designated in the registra-
tion documents. Other tire sizes may only be
used with the permission of the manufacturer
(ABE).
• Check tires regularly to ensure that the tread
is worn down evenly; check tread depth;
check for external damages.
• Always use the same make and model of tires
(summer or winter tires).
• Drive carefully on new tires for a stretch of
approx. 100 km to enable them to develop a
full road grip.
4.2 Tire pressure Only one tire size has been entered in the motor
vehicle registration certificate (parts I and II).
This does not have to be consistent with the size
of the tires on the vehicle. Should you have any
queries, please contact your contractual partner.
04-1
If the tire pressure is too low, the tire
can overheat. This can result in
serious damage.
Age of tires
Tires should not be more than 6 years old, be-
cause on the one hand your permission to drive
the camper at 100 km/h will elapse after this
period and, on the other, the material wears out
due to age and if the tires stand too long in one
spot. The 4-digit DOT number on the side of the
tire (if necessary, check the inside) shows the
date of manufacture. The first 2 digits refer to the
week, the last 2 to the year it was manufactured.
Example:
DOT 0808 refers to week 08 in manufacturing
year 2008.
04-2
4.4 Rims Only use rims that are covered by the vehicle
licence. Should you wish to use other rims,
please note the following:
Adjusting torque
- for steel rims: 105 Nm
- for aluminium rims: 120 Nm
04-3
4.5 Changing the tire
Preparing to change the tire
• If possible, only change the tire when the
base vehicle is coupled to the camper.
• Park the trailer carriage on as firm and even a
surface as possible.
• If you have tire trouble on a public road, turn
on your hazard warning signal lights and set
up the warning triangle.
• Base vehicle: Pull the handbrake, set the
wheels straight, put the vehicle in gear or, if
you are driving an automatic, set the gear to
1 P.
• Caravan: Pull the handbrake, leave the sup-
port wheel in its driving position, deactivate
the stabilization system (note: do not open
completely).
• Remove the wheel chocks j from the bottle
compartment.
04-4
Warnings for changing the tire
04-5
You should have a functional spare
tire available at all times. Therefore,
have the spare tire replaced without
delay.
04-6
5. Exterior structure
05-1
2 Refrigerator
The ventilation bars provide the refrigerator with
fresh air from outside to ensure sufficient cooling
performance. The ventilation bar j is located at
the bottom of the exterior vehicle wall. The de-
1 aeration bar k is located above the ventilation
bar.
Heating element
1 A ventilation flap provides the heating element
under the floor of the vehicle with fresh air.
The air from the heating element is carried out-
side by a flue. The flue is located on the roof of
the camper j .
05-2
5.2 External entry
External entry door
To open:
• Unlatch the lock with the key.
• Pull the door handle.
• Open the door.
To close:
• Shut the door.
• Turn the key until the latch clicks audibly.
• Turn the key back into the vertical position
and pull it out.
05-3
Occasionally, this may cause a slight
tension in the locking mechanism of
the door and when opening the door
from outside by pulling on the door
handle. Pressing lightly against the
door leaf near the lock releases this
constructively designed initial tensi-
on, allowing the door handle to be
used easily. Please do not pull vio-
lently on the outside handle or twist
it, because this will have a negative
effect on the gliding quality of the
latch and the ability to move the lock
freely.
B To open
A • Reach into the grip plate A , pull on the re-
lease lever, open the door and let go of the
lever.
To close
• Use only handle C to close the door from the
inside.
• Pull the door shut.
• Press locking knob B .
05-4
5.3 Service flap
To open:
• Unlock the flap with a key.
• Press the locking button.
• Open the flap by pushing down.
To close:
• Close the flap by pushing it up.
• Press the top left and right-hand corners of
the flap to ensure that all of the existing locks
actually snap into place.
• Use the key to lock the flap.
2 To close:
• Push the toilet flap to the side until it snaps in.
• Latch the lock j with the key.
1
05-5
5.5 Gas-bottle container flap
To open:
• Unlatch the lock j with the key.
• To unlock, turn the knob that pops out in a
counter-clockwise direction and open the
1 gas-bottle container lid.
To close:
4
Note that, due to the scissor-shaped
mounting k , there is a danger of
crushing your fingers when opening and
closing the lid of the gas-bottle contai-
ner.
05-6
5.6 Roof and roof rail
(model-specific / special accessory)
05-7
5.8 Bicycle carrier
for installation on the drawbar (special accessory)
05-8
5.9 Subsequent installation of an awning
When selecting an awning, please note the
limited amount of available space between the
outer tent lamp and the surrounding aluminium
moulding. Otherwise, it is only possible to install
an awning on the roof.
05-9
5.10 Rear ladder, roof and roof rail
(applies only for model Bianco 390 FH Sportivo as of 2009/2010)
Rear ladder
To fold down
• Release the belt buckle and swing the hinged
part of the rear ladder down.
To fold up
• Swing the hinged part of the rear ladder up
and hold it in place.
• Place the buckle of the belt in the appropriate
place around both stiles and pull it tight.
05-10
The heavier the roof load, the worse
the driving performance and brake
response.
05-11
05-12
6 Interior structure
To open:
• Press the push-lock until the knob jumps
up.
• Pull on the knob until the drawer slides out or
the door opens.
To close:
• Push on the knob to close the drawer or the
door.
• Press the push lock (press-lock knob) until
the knob snaps in and the drawer or door is
securely closed.
06-1
6.2 Extendable media oval
(model-specific)
4 3 4
06-2
6.3 Converting the seating arrangement into a bed
In most campers, the seating arrangements can
be converted to beds if required.
06-3
Converting a round seating ar-
Positioning for beds
rangement into a bed
(Saphir / Platin)
In some camper models (e.g. wide
vehicles) additional cushions (*) have
Back
Seat Seat Back
been included separately. These are
required for adjustment when conver-
ting the arrangement into a bed.
06-4
Seating position
450 QB
06-5
Converting the children‘s sea-
ting arrangement into a bed
(540 TK)
Seating position
06-6
Converting the centre seating
arrangement into a bed
(495 TFK / 495 TFKM / 550 TFK /
650 TFKM)
Seating position
06-7
For model Sapphire 550 TFK
only as of model 2009/2010
06-8
6.5 Windows
Hinged windows
To open:
The window can be adjusted to open at varying
degrees:
• Press the safety knob and turn the latch to an
upright position.
• Press the window outward until you hear a
click. The window automatically remains in
this position.
To close:
• Lift the window slightly outward so that the
hinge disengages.
• Close the window.
• Turn the latches into the vertical position.
Shades
To shut the shade
• Use the handle to pull the shade to the
desired position and click it into place. The
shade remains in this position.
06-9
To shut the insect screen
• Use the handle to pull the insect screen down
completely and click it into place. The shade
remains in this position.
06-10
Ensure that the roof bonnet is securely
fastened before you drive off.
Shade
The shade is infinitely variable; simply pull the
handle to the desired position or until the lock
snaps into the handle of the insect screen.
06-11
06-12
7. Installation of electrical devices
Please note:
• Do not remove safety tips and warnings on
the electrical equipment.
• The installation spaces for electrical equip-
ment such as distribution fuse boards, elec-
tric power supply, etc., may not be used as
additional storage spaces.
• Only authorised specialists may work on the
electric system.
• If the vehicle is equipped with a battery:
(special request / special accessory)
Only accumulators with bound electrolytes
(gel battery) may be installed.
• Turn off all equipment that uses 12 V before
connecting or disconnecting the battery.
07-1
7.2 Control panels
Diamant Display
Control elements
Programming
07-2
The menu offers you the following
functions:
Setting the time.
07-3
Bianco / Saphir / Platin / Topas
j Sockets 230 V
1
k Fresh water tank display
l Indirect lighting 12 V
m Workplace lighting 12 V or 230 V
2 n free
o Fume hood (accessory)
3
07-4
7.3 Electrical supply
Electricity for the camper can be obtained from
the following connections:
- 230 V mains connection 50 Hz. j
- via the base vehicle if it is connected using the
13-pole plug (limited functions)
1 - via a built-in auxiliary battery (not included).
Everything that uses 12 V, such as lighting,
water supply, etc., is available.
3
Supply via mains connection
The camper receives its electric power supply
via the 230 V CEE feeder plug on the side wall of
the vehicle.
To connect:
• Turn off the automatic circuit breaker mby
pressing the rocker switch down.
• Grab the bottom of the protective cover of the
exterior socket j and flip it up.
• Completely unwind the connecting cable,
1 insert the plug k and snap it into place.
• Turn the automatic circuit breaker m back
on.
3
2 To disconnect:
• Turn off the automatic circuit breaker m by
pressing the rocker switch down.
• Press the lever l in the exterior socket
down.
• Pull out the CEE plug k .
• Press the protective cover of the exterior
socket down until it snaps into place.
07-5
Rules for the mains connection:
• Use only a 3 x 2.5 mm2 cable with a maximum
length of 25 m, a CEE plug and connector to
connect the camper to an external 230 V
mains.
1st circuit 1 / 5A
2nd circuit 2 / 10A
3rd circuit 3 / 10A
4th circuit 4 / 15A
5th circuit 5 / 15A
07-6
Separate equipment/rally
package
(available only as a special accessory or
model-specific)
07-7
07-8
Clearance light
Side positioning light
Rear light, left Navigation light
13-pole
black
yellow
white grey
white
blue Cable, 8-pin
grey
Cable, 12-pin
grey/red
blue
white white
grey
12/13-pole plug
green
red
brown brown
Jäger Feder
9 10
"Feder" outlet (13-poled)
8 3
9 7
1 2 4
10 6
2 4 8 11
5
3 5
1
13
6
13 12
Jäger Feder
07-9
7.5 Lighting in the camper
Starry sky
(model-specific)
Switch off
The lamp no longer shines. (Both circuits are
switched off.)
07-10
Keypad for living area near the entrance
door
Switches the indirect lighting in the roof storage
boxes over the seating arrangement as well as
the lighting by the entrance door on and off.
(model/series-specific)
Switches the reading lights over the seating
arrangement on and off. Press the button longer
to dim the attached lights.
(model/series-specific).
Switches all of the attached electrical devices on
and off.
Switches the indirect lighting in the roof storage
boxes over the seating arrangement as well as
the lighting by the entrance door on and off.
(model/series-specific)
Switches the reading lights over the seating arran-
gement on and off. Press the button longer to dim
the attached lights.
(model/series-specific).
07-11
Switches all of the attached electrical devices on
and off.
07-12
1 Replacing the fluorescent lamp
in the glass cabinet (model-specific)
Procedure
• Remove the three protective caps j at the
top of the cornice; remove the screws and the
cornice.
• Remove the three protective caps k on each
side of the cabinet. Remove the screws and
pull out the entire cabinet, slanting it forward.
2 2
The fluorescent lamp is now visible and can
be replaced easily.
07-13
• Pull the lamp cover k off at the back.
07-14
7.6 Electric floor heating
(special accessory, model-specific)
The heating system is located in the middle
walking space of the floor. It is 60 cm wide; the
length depends on the type of vehicle. This heat-
ing system is not meant to heat the room; in-
stead, it reduces the loss of heat via the floor.
Technical data
Voltage 26V~ from its own 230V/26V trans-
former.
Depending on the length of cable mounted, the-
re is a power consumption of approx. 56 W/mtr.
07-15
7.7 Microwave / Oven
(special accessory, model/series-specific)
7.8 Air-conditioning
(special accessory, model/series-specific)
07-16
8. Water
8.1 Water supply The water supply system corresponds
at least to the state of the art as of
10/2007 (Directive 2002/72/EC).
General information
• Water that is suitable for drinking should
always be used with working with food. This
also applies to washing your hands and
cleaning the objects that have come into
contact with food.
• To ensure that the quality of the water is fault-
less, the water should be taken directly from
the public drinking water system.
• Under no circumstances should garden
hoses, watering cans and similar materials
that are unsuitable for drinking water be used
to fill the mobile system.
• If the caravan will not be used for a longer
period of time, the entire water system must
be emptied completely.
• After long periods of stagnation, the water
system must be rinsed thoroughly before it is
used again. If you find that it is contaminated,
the material should be disinfected using
cleaning agents that are permitted and suit-
able.
08-1
Rolling waste water tank
The rolling waste water tank j can be pushed
under the vehicle when parked; it collects waste
water. It has a 24 liter capacity. The waste water
tank can be transported with a fold-out transport
1 handle to dispose of the contents at the desig-
nated stations.
08-2
Fresh water tank, 25 or 45 l
(model-specific, special accessory)
For a 25 l tank:
2 • Remove the drain plug m .
• Loosen the grommet by turning it counter-
clockwise 2-3 times, then release the tension
by pressing it in. Then remove the stopper by
pulling it up.
08-3
2 To remove water:
• The water will be mixed to the desired
temperature according to the position of the
pre-mixing unit.
Electric operation:
• Use the switch l to turn on the therme. Use
the thermostat to regulate the water tempera-
ture to approx. 55° C.
• Power consumption: approx. 300 W.
WARNING:
The block circuit diagram only reflects the func-
tion. Due to the various floor plans, individual
modifications are possible.
08-4
If your camper was fitted with a TRUMA boiler
by the manufacturer (model-specific, special
accessory) please observe the manufacturer's
operating instructions, included in this package.
Drain valves:
3 directly next to the therme; another 2 on the
opposite side (layout/model-specific).
08-5
08-6
9. Gas
9.1 General safety rules for the use of liquid gas
facilities
The gas operation pressure is
30 mbar.
09-1
• Pressure regulators must have a fixed output
pressure of 30 mbar. The requirements of EN
12864, Appendix D, apply accordingly. The
regulator must have a rate of flow of 1.2 kg/h.
• Connect the regulator knobs very carefully by
hand. Do not use keys, pliers or similar tools.
09-2
9.2 Gas supply The camper is equipped with propane gas
facilities. These facilities operate the following
devices:
- cooker
- refrigerator
- heating element
- warm water boiler, if necessary
- special equipment, if necessary
- baking oven, if necessary
Bottle container
2
The gas-bottle container holds two 11 kg bottles
3 of propane gas j . The gas bottles are con-
nected to the supply line by a safety regulator
hose k . Each bottle is fastened to the gas-
bottle fixture by means of two belts. l
1
Gas bottles may only be carried in
the gas-bottle container.
09-3
Changing gas bottles:
Never smoke or light open fires when
changing gas bottles. After changing
bottles, check whether gas is escaping
from the points of attachment by
spraying these with a leak indicator.
- S 5002
- S 3002
- S 3002 P
Place of installation:
- In the clothes cupboard or chest of drawers.
09-5
Please refer to the manufacturer‘s
separate operating manual for detailed
handling information.
To shut off:
• Turn the operation handle j to position "0".
The automatic ignitor is thereby shut off.
• Close the bottle valve and the quick-close
valve if the unit is not used for a longer period
of time.
2
09-6
Circulation fan
The heater in your camper is equipped with a
circulation fan. It circulates the hot air throughout
the interior of the camper..
1 Operation
An external switch j is used to regulate the
efficiency of the fan. The switch is located near
the heating.
09-7
The manufacturer, TRUMA®, recom-
mends the following for cleaning the
front screen of the „open fire“ reflec-
ting panel: For safety reasons, the
front screen consists of Makrolon
polycarbonate, which scratches very
easily. Use non-synthetic fibres for
cleaning (with the exception of imita-
tion chamois window cloths). A tried
and tested product, for example, is
the window cloth made by Vileda).
Cleaning the screen (either wet or dry
with a cleaning solution which eva-
porates while cleaning) with cloths
made of synthetic fibres would cause
the front screen to become charged
with static electricity, which attracts
dust like a magnet. The front screen
should, therefore, always be cleaned
with a damp chamois cloth or imita-
tion (as described above) using sui-
table window cleaning solutions (the
following products have been tried
and tested: Glasfee, Sidolin streifen-
frei. Before being used, these cloths
should be rinsed out well to ensure
there is no dust on them that might
scratch the surface.
Location
• In the wardrobe.
09-8
Important information
• Please read the separate operating instruc-
tions carefully before initial operation of the
heating system.
• Always turn off the main switch for the heating
system whenever the vehicle is not in use.
• If there is danger of frost, always drain off the
fresh water in the hot-water heater.
• You may not start the heating if the device has
not been filled with glycol.
• To make the best possible use of the convec-
tion principle, the air must not be prevented
from circulating throughout the camper, e.g.
behind the back cushions, winter ventilation
slots, in the bed frame and behind the stow-
age cupboards.
Modes of operation
• LPG operation
• Heating cartridge operation (230 V)
• Combined LPG and heating cartridge opera-
tion
Function modes
• Water heating
• Heating and water heating
• Heating
Operating device
When in the idle position, the device shows
which heating functions have been activated; the
background lighting of the display is off. After
two minutes, the operating device automatically
switches from the set position to the idle posi-
tion if no button has been pressed or if the idle
position has been set using the arrows.
Begin by pressing any button. The background
lights up and those functions that can be set will
start to blink. Use the arrows to select the func-
tion you wish to set. Settings are saved automa-
tically.
09-9
9.4 Refrigerator
Please refer to the manufacturer‘s
separate operating instructions.
Methods of operation
The refrigerator can be operated in three differ-
ent ways. The desired mode of operation is set
using the energy source selector switch.
12 V operation
• Set the energy selection switch to battery
operation.
• 12 V operation will only work when the motor
of the base vehicle is running.
• The refrigerator operates without regulating
the thermostat (continuous operation).
Therefore, 12 V operation should only serve
to maintain the temperature that has already
been reached.
• To switch off, turn the energy selection switch
to 0.
230 V operation
• Set the energy selection switch to mains oper-
ation.
• Use the thermostat to regulate the tempera-
ture.
• To switch off, turn the energy selection switch
to 0.
09-10
Gas operation
• Set the energy selection switch to gas opera-
tion.
• Open the main shutoff valve on the gas bottle
and the gas shutoff spigot marked “refrigera-
tor”.
• Turn open the thermostat completely and
hold it pressed down. The refrigerator will
ignite by pressing the button for manual igni-
tion.
• When it is ignited, let go of the thermostat.
Repeat the previous step if it has not ignited.
• Use the thermostat to regulate the cooling
efficiency.
• To switch off, turn the energy selection switch
to 0.
• Close the main shutoff valve on the gas bottle
and the gas shutoff spigot marked “refrigera-
tor”.
09-11
9.5 Gas cooker
Please refer to the manufacturer‘s
1
separate operating instructions.
Operation
• Open the cover j .
• Set the turning knob k of the desired burner
in the ignition position (large flame) and press.
• Ignite the burner with gas lighter fluid, a
match and/or lighter.
2 • Hold the turning knob k in for an additional
10-15 seconds.
• Release the turning knob k and position it to
(Pictures may vary somewhat from the equip- the desired setting (large or small flame).
ment on your camper!) • If the ignition is unsuccessful, repeat the pro-
cess from the beginning.
09-12
Use potholders or mitts when hand-
ling hot pots, pans and similar ob-
jects. Danger of injury!
9.6 Oven
(model-specific)
09-13
The oven gets very hot when it is ope-
rating on gas. Protect children from
touching parts that conduct heat.
09-14
10. Accessories Note the detailed operation instructions, instal-
lation instructions and circuit diagrams from the
manufacturers when using accessories. These
are located in your service package.
The following table includes a list of weights for accessories. If these parts are carried in or on the
camper and are not included in the standard scope of delivery, they must be taken into consideration
when determining the full load.
10-1
The values given for the weight
are average values; they may vary
depending on the model and the fea-
tures. To determine your vehicle‘s ex-
act capacity for additional loads we
recommend that you visit a nearby
calibrated lorry weigher.
10-2
11. Maintenance and upkeep
11-1
Rules for greasing and oiling:
• Grease the bearing spaces on the casing of
the overrunning system.
• Oil movable parts such as bolts and joints.
• Grease the movable parts of the overrun cou-
pling.
• Check to see that the stationary parts of the
shearing rod are not jammed.
• Clean and oil all movable and stationary parts
at regular intervals.
11-2
Rules for cleaning the exterior:
• Rinse the vehicle with a light stream of water.
• Wipe the vehicle down with a soft sponge and
typical shampoo solution.
Rinse the sponge often in the process.
• Afterwards, rinse with a great deal of water.
• Dry the vehicle with a suede cloth.
• Allow the vehicle to stand out in the open
after washing to let it dry.
11-3
Rules for waxing the surfaces:
• Treat the paint surfaces periodically with wax.
Note the guidelines for use from the wax
manufacturer.
Undercarriage
The undercarriage of the camper has been
specially coated. Any damage to the protective
coating should be repaired immediately.
11-4
Windows and doors
Rules for upkeep:
• Rub the insulation of doors and windows
lightly with talcum.
• Only clean acrylic glass window panes with a
clean, moist sponge and a soft towel. Dry
cleaning can scratch the panes.
Accessories
Rules for upkeep:
• Clean synthetic parts (i.e. bumpers, protective
covers) with warm water (up to 60° C) and
mild household cleaner.
• Clean greasy or oily surfaces with spirit.
• If necessary, grease door hinges and lifting
stanchions.
• Clean the fresh water taps, fresh water tank
and waste water tank annually.
11-6
11.4 Winter operation Preparation
Due to the overall vehicle conception, (aluminium
sandwich construction with insulated windows)
your camper is suitable for winter operation.
WARNING: We recommend that you optimise
your camper in accordance with your personal
tastes for winter camping.
Your dealer will gladly advise you in these mat-
ters.
General rules:
• Only leave the camper in an enclosed space if
this space is dry and well ventilated. Other-
wise, park the camper out in the open.
11-7
Winter operation
11-8
After the end of the winter
season
Rules for upkeep:
• Carry out a thorough undercarriage wash.
This removes thawing agents (salts, lye resi-
due).
• Clean the exterior of the camper and use
commercially available car wax to preserve
steel parts.
• Should you have installed one, do not forget
to remove the chimney extension.
11-9
11-10
12. Waste disposal and environmental
protection
12.1 The environment and mobile travel
Environmentally sound use
By nature of their activities, camper users bear a
considerable responsibility towards the environ-
ment.
Therefore, you should always use your camper in
an environmentally sound manner.
12-1
Rules for the disposal of faeces:
• Only add approved cleaners to the faeces
tank.
Disposal:
• Never allow the faeces tank to become too
full. Empty the tank immediately, at the latest
when the fill indicator lights up.
• Never dispose of waste water in gullies!
Street sewer lines often do not lead to waste
water treatment plants.
The preservation of the environment
is not just in the best interests of
nature, but also in the best interests
of all campers!
12-2
13. Technical data
13-1
13.2 Technical data
Bianco
Tire size Stabiliser Total Length/ Total Total Tare Basic Mass Permissible Additional Length of
length usable width head- weight equipment when maximum loading guide rail
cm length cm room approx. approx. ready to weight kg * capacity for outer
cm cm kg kg 2) drive approx. tent
approx. kg kg * cm
1)
390 FH 205/65 R 15 AKS 3004 591 451/401 230 260/195 970 73 1043 1300/1200 257/157 855
445 FB 205/65 R 15 AKS 3004 665 525/475 230 260/195 1100 73 1173 1500/1360 327/187 929
445 TFB 205/65 R 15 AKS 3004 665 525/475 230 260/195 1110 73 1183 1500/1360 317/177 929
465 TG 205/65 R 15 AKS 3004 692 555/500 230 260/195 1160 73 1233 1500/1360 267/127 955
Bianco Sportivo
Tire size Stabiliser Total Length/ Total Total Tare Basic Mass Permissible Additional Length of
length usable width head- weight equipment when maximum loading guide rail
cm length cm room approx. approx. ready to weight kg * capacity for outer
cm cm kg kg 2) drive approx. tent
approx. kg kg * cm
1)
390 FH 205/65 R 15 AKS 3004 591 451/401 230 260/195 1000 73 1073 1500/1300 425/227 855
Saphir
Tire size Stabiliser Total Length/ Total Total Tare Basic Mass Permissible Additional Length of
length usable width head- weight equipment when maximum loading guide rail
cm length cm room approx. approx. ready to weight kg * capacity for outer
cm cm kg kg drive approx. tent
2)
approx. kg kg * cm
1)
410 QF 195/65 R 15 AKS 3004 600 460/410 220 260/195 960 73 1033 1200/1100 167/67 864
410 QK 195/65 R 15 AKS 3004 600 460/410 220 260/195 970 73 1043 1200/1100 157/57 864
420 QF 205/65 R 15 AKS 3004 620 480/430 220 260/195 970 73 1043 1200/1300 157/257 885
450 QB 205/65 R 15 AKS 3004 640 500/450 230 260/195 1060 73 1133 1300/1200 167/67 905
470 TF 205/65 R 15 AKS 3004 665 525/475 230 260/195 1120 73 1193 1500/1360 307/167 929
470 TFB 205/65 R 15 AKS 3004 665 525/475 230 260/195 1130 73 1203 1500/1360 297/157 929
490 TF 205/65 R 15 AKS 3004 692 555/500 230 260/195 1150 73 1223 1500/1360 277/137 955
495 TFB 195/65 R 15 AKS 3004 710 570/520 230 260/195 1220 73 1293 1600/1700 307/407 974
495 TG 195/65 R 15 AKS 3004 710 570/520 230 260/195 1210 73 1283 1600/1700 317/417 974
495 TFK 195/65 R 15 AKS 3004 710 570/520 230 260/195 1230 73 1303 1600/1700 297/397 974
495 TFKM 195/65 R 15 AKS 3004 710 570/520 230 260/195 1260 73 1333 1600/1700 267/367 974
540 TG 195/65 R 15 AKS 3004 739 600/550 230 260/195 1240 73 1313 1600/1700 287/387 1003
540 TK 195/65 R 15 AKS 3004 739 600/550 230 260/195 1250 73 1323 1600/1700 277/377 1003
540 TF 195/65 R 15 AKS 3004 739 600/550 230 260/195 1230 73 1303 1600/1700 297/397 1003
550 TFK 195/65 R 15 AKS 3004 759 620/570 230 260/195 1280 73 1353 1600/1700 247/347 1023
560 TFK 195/65 R 15 AKS 3004 759 620/570 250 260/195 1380 90 1470 1600/1700 130/230 1023
560 TFKM 195/65 R 15 AKS 3004 759 620/570 250 260/195 1360 90 1450 1600/1700 150/250 1023
13-2
Platin
Tire size Stabiliser Total Length/ Total Total Tare Basic Mass Permissible Additional Length of
length usable width head- weight equip- when maximum loading guide rail
cm length cm room approx. ment ready to weight kg * capacity for outer
cm cm kg approx. drive approx. tent
kg 2) approx. kg kg * cm
1)
470 TFB 205/65 R 15 AKS 3004 665 525/475 230 260/195 1150 73 1223 1500 277 929
495 TG 195/70 R 15 C AKS 3004 710 570/520 230 260/195 1270 73 1343 1600/1700 257/357 974
495 TF 195/70 R 15 C AKS 3004 710 570/520 230 260/195 1240 73 1313 1600/1700 287/387 974
495 TFB 195/70 R 15 C AKS 3004 710 570/520 230 260/195 1270 73 1343 1600/1700 257/357 974
540 TG 195/70 R 15 C AKS 3004 739 600/550 250 260/195 1300 73 1373 1600/1700 227/327 1003
650 TFKM/A 185/65 R 14 AKS 3004 851 710/660 250 260/195 1640 90 1730 2000/1900 270/170 1112
650 TFKM/B 185/65 R 14 AKS 3004 851 710/660 250 260/195 1640 90 1730 2000/1900 270/170 1112
650 TFK 185/65 R 14 AKS 3004 851 710/660 250 260/195 1680 90 1770 2000/1900 230/130 1112
650 TFD 185/65 R 14 AKS 3004 851 710/660 250 260/195 1670 90 1760 2000/1900 240/140 1112
Topas
Tire size Stabiliser Total Length/ Total Total Tare Basic Mass Permissible Additional Length of
length usable width head- weight equip- when maximum loading guide rail
cm length cm room approx. ment ready to weight kg * capacity for outer
cm cm kg approx. drive approx. tent
kg approx. kg kg * cm
2)
1)
490 TF 205/65 R 15 AKS 3004 692 555/500 230 260/195 1180 73 1253 1500 247 955
495 TG 195/70 R 15 C AKS 3004 710 570/520 230 260/195 1220 73 1293 1600/1700 307/407 974
495 TFB 195/70 R 15 C AKS 3004 710 570/520 230 260/195 1220 73 1293 1600/1700 307/407 974
520 TG 195/70 R 15 C AKS 3004 710 570/520 250 260/195 1260 73 1333 1600/1700 267/367 974
520 TFB 195/70 R 15 C AKS 3004 710 570/520 250 260/195 1280 73 1353 1600/1700 247/347 974
550 TG 195/70 R 15 C AKS 3004 759 620/570 230 260/195 1310 73 1383 1600/1700 217/317 1023
560 TG 195/70 R 15 C AKS 3004 759 620/570 250 260/195 1400 90 1490 1600/1700 110/210 1023
620 WGD 185/65 R 14 AKS 3004 807 665/615 250 260/195 1530 90 1620 1900/2000 280/180 1067
Diamant
Tire size Stabiliser Total Length/ Total Total Tare Basic Mass Permissible Additional Length of
length usable width head- weight equip- when maximum loading guide rail
cm length cm room approx. ment ready to weight kg * capacity for outer
cm cm kg approx. drive approx. tent
kg 2) approx. kg kg * cm
1)
495 TG 195/70 R 15 C AKS 3004 710 570/520 230 260/195 1310 73 1383 1700 317 974
550 TG 195/70 R 15 C AKS 3004 759 620/570 230 260/195 1420 73 1493 1700 207 1023
560 TG 205/70 R 15 C AKS 3004 759 620/570 250 260/195 1480 90 1570 1800 230 1023
560 WG 205/70 R 15 C AKS 3004 759 620/570 250 260/195 1490 90 1580 1800 220 1023
560 WGD 205/70 R 15 C AKS 3004 759 620/570 250 260/195 1500 90 1590 1800 210 1023
650 TF 185/65 R 14 AKS 3004 851 710/660 250 260/195 1700 90 1790 2000 210 1112
650 TG 185/65 R 14 AKS 3004 851 710/660 250 260/195 1720 90 1810 2000 190 1112
13-3
Diamant VIP
Tire size Stabiliser Total Length/ Total Total Tare Basic Mass when Permissible Additional Length of
length usable width head- weight equipment ready to maximum loading guide rail
cm length cm room approx. approx. drive weight kg * capacity for outer
cm cm kg kg 2) approx. kg approx. tent
1) kg * cm
620 TF 185/65 R 14 AKS 3004 807 665/615 250 277/195 1690 90 1780 2000 220 1067
700 TGD 195/70 R 15 C AKS 3004 893 753/700 250 277/195 1910 90 2000 2200 200 1153
700 TFD 195/70 R 15 C AKS 3004 893 753/700 250 277/195 1900 90 1990 2200 220 1153
Legend
The masses for campers are calculated on the basis of Directive 97/27/EC as well as the European
standard DIN EN 1645-2.
The basic equipment includes all of the pieces of equipment and liquids that are required for the
secure and correct use of the vehicles.
13-4
13.3 Basic equipment
For fresh water tank, 25 l
Position Weight Number Total
Elec. feeder 4 1 4
73
Elec. feeder 4 1 4
90
13-5
13.4 Lighting
12 V Vehicle lighting
Position Description Voltage Voltage
exterior left blinker 12 21
exterior right blinker 12 21
exterior stationary light 12 5
exterior brake light 12 21
exterior license plate 12 5
exterior silhouette lamp 12 3
exterior side marker lamp 12 3
exterior side marker 12 3
exterior 3rd brake light 12 –
13-6
Index
A Opening and closing 06-1
Accessories 10-1 Forced ventilation 05-1
Additional equipment 03-14 Fresh water tank 08-3
Additional loads 03-13
Air-circulation fan 09-7 G
Airing 11-2 Gas 09-1
Automatic ignitor 09-6 Gas bottle container 09-3
Changing the battery 09-6 Gas container flap 05-6
Awning installation 05-9 Gas cooker 09-12
Operating the cooker 09-12
B Gas supply 09-3
Basic equipment 03-13, 13-5 Gas system
Bed conversion 06-3 Inspection 09-1
Bicycle carrier 05-8 General inspection 03-11
Brakes 02-8 Greasing 03-1, 11-1
Bunk beds 06-7 Guide rail for outer tent 05-7
C H
Changing the tire 04-4 Hand brake 03-7
Checking the gas system 09-1 Heating 05-2, 09-5
Choosing a parking space 02-9 High-visibility vest 02-1
Circuit diagram, lighting of the vehicle 07-8 Hitching/unhitching 03-3
Control panels 07-2 Hot water supply 08-3
Hot-air heating 09-5
D Hot-water heating system 09-8
Definition of masses 03-13
Doors I
Opening and closing 06-1 Insect screen 06-9
Upkeep 11-5
Drawbar load 02-6 L
Driving 02-7 Lighting 07-10, 13-6
Driving in curves 02-7 Loading 02-5
Driving in reverse 02-8
Driving noises 03-7 M
Maintenance 03-4, 11-1
E Media oval 06-2
Electrical devices
Redirecting 02-10 O
Electrical floor heating 07-15 Oiling 03-1, 11-1
Electrical supply 07-5 Oven 09-13
Emergency equipment 02-1 Overrunning brake facilities 03-8
Entry door 05-3
Interior 05-4 P
Environmental protection 12-1 Profile depth 04-2
Push lock 06-1
F
Fighting a fire 02-2 R
First aid kit 02-1 Refrigerator 05-2, 09-10
Flaps Registration 03-11
Ix-1
Regulator knobs 09-1
Rims 04-3
Roof rail 05-7
Rotating stanchions 03-10
S
Safety tips 07-1
Securing the vehicle 02-9
Service flaps 05-5
Shunting 02-9
Shutoff valves
Place of installation 09-4
Suitability for a speed of 100 km/h 03-12
T
Technical data
Weights 13-2
Tire pressure 13-1
Technically permissible maximum weight 03-13
Tire pressure 04-1, 13-1
Tires 04-1
Tires, age of 04-2
Toilet flap 05-5
Truma Therme 08-3
U
Undercarriage 11-4
Upkeep 11-2
V
Valves 09-1
Vehicle keys 02-1
Ventilation and de-aerating 05-1
W
Warning triangle 02-1
Waste water tank 08-2
Water supply 08-1
Water system 02-10
Windows
Hinged windows 06-9
Upkeep 11-5
Winter operation 11-7
Ix-2