Professional Documents
Culture Documents
u r T
P asy
E
One-component
transparent aliphatic
polyurethane
waterproofing
membrane for terraces
and balconies
E PRODUCT IDENTITY
Consistency: liquid
Colour: transparent
APPLICATION DATA
MECHANICAL CHARACTERISTICS
Apply at least two even coats of are for a seamless film on a flat surface and
Purtop Easy T with a roller or trowel to could be higher on uneven substrates.
form a total thickness of around 1 mm.
Purtop Easy T may also be applied by PACKAGING
airless spray but must be diluted with 5% of 5 kg and 20 kg drums.
Thinner PU.
STORAGE
Purtop Easy T has a smooth finish. To obtain Purtop Easy T may be stored for 12 months
a finish with a non-slip effect, apply two coats in its original packaging in a dry, covered
of Purtop Easy T and leave them to dry. area at a temperature of between +5°C
Then, when the second coat is dry, lightly and +35°C.
broadcast the surface with Quartz 0.25 and
apply a thin coat of Purtop Easy T with a SAFETY INSTRUCTIONS FOR
roller, making sure to criss-cross the roller PREPARATION AND APPLICATION
strokes so that the quartz sand is distributed Purtop Easy T is inflammable. It is
evenly. recommended to store the product away
from naked flames and sparks, to avoid
Cleaning tools smoking, to prevent the build-up of
It is recommended to clean tools with water electrostatic energy and to work in well
before the product starts to set. Once ventilated areas.
hardened, cleaning is much more difficult and It also irritates the eyes, skin and respiratory
must be carried out mechanically. system and may cause sensitisation to those
sensitive to isocyanates if it comes into
CONSUMPTION contact with the skin.
1 kg/m² corresponds to a coat around During use wear protective gloves and
1 mm thick. goggles and take the usual precautions
In general, the consumption rates below for handling chemicals. If the product
comes in contact with the eyes or skin Please refer to the current version of the
wash immediately with plenty of water Technical Data Sheet, available from our
and seek medical advice. It is recommended website www.mapei.com
to work in well ventilated areas. If there
is insufficient ventilation, or if the user LEGAL NOTICE
is exposed for too long to the product, The contents of this Technical Data
wear suitable protection for the respiratory Sheet (“TDS”) may be copied into another
system. project-related document, but the
For further and complete information about resulting document shall not supplement
the safe use of our product please refer to the or replace requirements per the TDS in
latest version of our Safety Data Sheet. force at the time of the MAPEI product
installation.
RESTRICTED TO PROFESSIONAL USERS. The most up-to-date TDS can
be downloaded from our website
WARNING www.mapei.com.
Although the technical details and ANY ALTERATION TO THE WORDING
recommendations contained in this product OR REQUIREMENTS CONTAINED OR
data sheet correspond to the best of our DERIVED FROM THIS TDS EXCLUDES
knowledge and experience, all the above THE RESPONSIBILITY OF MAPEI.
information must, in every case, be taken as
merely indicative and subject to confirmation
after long-term practical application; for
this reason, anyone who intends to use the
product must ensure beforehand that it is All relevant references
suitable for the envisaged application. In for the product are available
every case, the user alone is fully responsible upon request and from
for any consequences deriving from the use www.mapei.com
of the product.
E
rtop
Puasy T