Professional Documents
Culture Documents
Kind Attention:
Mr. Venkat Anumula
Senior Manager-CAE
Padmini VNA Mechatronics Pvt Ltd
Gurgaon
Step 1: Assigning the moving nodes
a) In the AcuConsole GUI expand the Model panel and right click on
nodes and click on define.
b) Define the mesh displacement in the Y-direction by expanding the
nodes_moving panel.
c) In the mesh motion panel, assign the following parameters
Type: Linear
Mesh Motion: MM_Trans (procedure for defining this is
mentioned in the next step)
Curve Fit Variable: Y-direction
d) Click on curve fit values and enter the start and end co-ordinates.
This data can be obtained from the CAD geometry.