Professional Documents
Culture Documents
Page 1 of 3
Cerrar SIS
Pantalla anterior
Producto: WHEEL LOADER
Modelo: 966G II WHEEL LOADER ANZ00504
Configuración: 966G II Wheel Loader ANZ00001-UP (MACHINE) POWERED BY 3176C Engine
Desarmado y Armado
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Número de medio -RENR4360-06 Fecha de publicación -01/01/2009 Fecha de actualización -08/01/2009
i05180939
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-5552 Large Bore Brush 1
9U-7237 Brush Extension 1
B
9U-7244 End Brush 1
C 9U-7258 Driver Cap 1
D 221-9778 Puller Stud 1
E 4C-9507 Retaining Compound 1
NOTICE
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 24/03/2022
966G II Wheel Loader ANZ00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... Page 2 of 3
Illustration 1 g00512115
Note: Check the fuel passage in the cylinder head assembly. Remove any debris left from the
use of Tool (A) and Tool (B) .
3. Apply tooling (E) to upper land (1) and lower land (2) on the unit injector sleeve.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 24/03/2022
966G II Wheel Loader ANZ00001-UP (MACHINE) POWERED BY 3176C Engine(SEB... Page 3 of 3
Illustration 2 g03321660
5. Position Tooling (D) and the unit injector sleeve in the cylinder head.
6. Use Tooling (C) and a hammer to install unit injector sleeve in the cylinder head.
7. Repeat Step 1 through Step 6 in order to install the remaining unit injector sleeves.
Copyright 1993 - 2022 Caterpillar Inc. Thu Mar 24 06:55:24 MST 2022
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 24/03/2022