Professional Documents
Culture Documents
5207RINST Carb Setup
5207RINST Carb Setup
5R Engines
Out of the box, the factory default carburetor configuration for the TRX2.5R Racing Engine is correct to fit directly into a Revo.
The carburetor will need to be reconfigured to fit the TRX 2.5R Racing Engine into other Traxxas models. Refer to the diagram
for the correct configuration for your Traxxas model.
Revo Configuration (default configuration out of the box)
55°
10°
150°
10°
5°
*Note: T-Maxx with Pro.15 requires Note: Using longer fuel line (Part #3147X) will
TRX 2.5 conversion kit (part #4900) allow the default fuel inlet angle (150°) to be used.
Nitro 4-Tec Configuration*
Carb Angle Throttle Arm Angle Fuel Inlet Fitting Angle
10°
3°
125°
*Note: Nitro 4-Tec with Pro.15 requires TRX 2.5 conversion kit (part #4800)
Nitro Rustler and Nitro Sport SE* Configuration
Carb Angle Throttle Arm Angle Fuel Inlet Fitting Angle
10°
5° 125°
*Note: Nitro Sport SE requires Pro.15 to TRX 2.5 conversion kit (part #4400)
www.TRAXXAS.com
Traxxas, 1100 Klein Road, Plano, TX 75074, Phone: 972-265-8000, Fax: 972-265-8011, e-mail: support@Traxxas.com
Form5207RINST Rev 050505