Professional Documents
Culture Documents
®
1. Download the Spinnaker SDK from our downloads page.
4. Launch SpinView:
Start Menu-->All Programs-->Spinnaker SDK-->SpinView
Or, search for Spinnaker in the Windows taskbar.
Your camera appears in the Devices pane.
5. Click the camera to enumerate and access camera features or double-click the camera to start
streaming.
Further configuration of the camera can be done using the Features pane described below.
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 1
Solutions Inc.
All rights reserved.
Navigating SpinView
Menus
There is a main menu at the top of the SpinView window.
Menu Function
View-->Resest Application Settings Reset and load default settings at next launch
There are also context menus accessible via right-click available in the Devices pane, Features pane, and
Display pane.
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 2
Solutions Inc.
All rights reserved.
Buttons
Toolbar buttons are available for many functions.
Devices
Refresh the devices list
Pane
Devices
Display all adaptors in the Devices pane
Pane
Devices
Pane
Start acquisition
Display
Pane
Devices
Pane
Stop acquisition
Display
Pane
Devices
Disconnect the camera
Pane
Devices
Configure device IP address. Only applicable to GigE cameras.
Pane
Devices
Switch Device Driver. Opens the Driver Configuration window.
Pane
Devices
Update device firmware. Opens the Firmware Update window.
Pane
Devices Save camera settings profile. Save the current settings to User Set 1 and make it the
Pane default configuration.
Devices
Copy camera properties to clipboard
Pane
Devices
Show camera properties. Opens the Properties window.
Pane
Display
Single image acquisition
Pane
Display
Stop streaming
Pane
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 3
Solutions Inc.
All rights reserved.
Button Toolbar Function
Display
Save image to disk
Pane
Display Display histogram. Opens the Histogram window. Start streaming before opening
Pane histogram.
Display
Open Recording window
Pane
Features
Sort features by XML sequence
Pane
Features
Sort features by category
Pane
Features
Sort features alphabetically
Pane
Features
Expand/collapse all nodes
Pane
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 4
Solutions Inc.
All rights reserved.
Main Window
The SpinView main window is divided into separate panes. You can resize, float, or dock these panes.
n Devices - lists all connected devices, or all adapters
n Display - displays the current image acquisition along with acquisition settings and image chunk data
(if enabled)
n Features - lists all features for the selected camera features in order to view and control camera
parameters
n Log Viewer - lists all system messages, errors, and warnings
Devices Pane
The Devices pane shows adaptors with cameras currently connected to them or all adaptors. Select a camera
to load its features.
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 5
Solutions Inc.
All rights reserved.
Features Pane
The features pane displays the features of the selected camera and provides access to managing the camera
parameters.
Settings Tab
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 6
Solutions Inc.
All rights reserved.
These features are
grouped by:
n File Access
n Information
n Settings
n Image Format
n Processing
n GPIO
n Sequencer
n Features
Features Tab
n
By categories
n
Alphabetically
Features Sorted by XML
Features marked with a lock symbol are read only. Some features may be locked and unlocked based on
the settings of other features. Some features are always read only.
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 7
Solutions Inc.
All rights reserved.
In the Features pane you can search for a feature. The search is executed as soon as you begin typing. Found
items are highlighted. Related items are also shown in the search results.
Search Execution
Selecting a feature displays a description. Hovering over a text box displays a tooltip with the feature's valid
range.
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 8
Solutions Inc.
All rights reserved.
Right-click in the Features pane to access a context menu.
From the context menu you can change your visibility of the features. By default, SpinView displays
everything (Guru) but this can be limited by selecting Expert or Beginner.
From the context menu, select Display Node Information to see an information pane about the feature. This
information can be copied to the clipboard.
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 9
Solutions Inc.
All rights reserved.
Panes and columns within panes can be resized.
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 10
Solutions Inc.
All rights reserved.
Panes can also be undocked by dragging by the title bar.
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 11
Solutions Inc.
All rights reserved.
Display Pane
The display pane shows the image being captured as well as information about the image settings.
Right click on the image to access a context menu from which you can save or rotate the image, stretch to
fit, draw and configure cross-hair, change the color processing method, and other settings. Some settings
may depend on the camera model selected.
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 12
Solutions Inc.
All rights reserved.
Right click on the Display Pane frame to access a context menu from which you can change the items that
appear in the status bar of the display and view image information such as chunk data.
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 13
Solutions Inc.
All rights reserved.
To open the recording window, click the record icon on the Display pane menu.
Recording Window
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 14
Solutions Inc.
All rights reserved.
Log Viewer
The Log Viewer displays messages, errors, and warnings.
You can define the logging level that you want to monitor. Levels are inclusive, that is, if you monitor debug
level error, you also monitor all logging levels above it.
The Log Viewer menu allows you to export the information, filter, change the display, and search. Spinnaker
also saves a log file to: C:\ProgramData\Spinnaker\Logs
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 15
Solutions Inc.
All rights reserved.
Updating Firmware
The latest firmware versions often include significant bug fixes and feature enhancements. To determine the
changes made in a specific firmware version, consult the Release Notes.
2. In SpinView, from the Device List, right-click on the camera and select Update Device Firmware,
or click the Update Device Firmware button from the Device pane menu.
NOTE: Do not disconnect the camera from the computer during the firmware update process.
12/14/2021
©2015-2021 FLIR
Integrated Imaging Getting Started with SpinView 16
Solutions Inc.
All rights reserved.