Professional Documents
Culture Documents
By Vorapoj
1
Basic of SYSTEM drawing of TML
Subject
1.Drawing lay out
2.TS guide line
3. Drawing system(Ts11814)
3.1 Project group( TS 11814)
3.2 Design group(TS 11812)
4. Circularity
5. Cylindriity
6. Perpendiculality
7.Angularity
8.Parallelism
9. Position
10.Concentric
11.Symmetry
11.Profile
12. Run out
13. Total run out
14. Surface texture definition and symbols
15.General tolerance GD&T for application 2
Basic of SYSTEM drawing of TML
3
Basic of SYSTEM drawing of TML
4
GEROMETRIC DIMENSION AND TOLERANCING
5
GEROMETRIC DIMENSION AND TOLERANCING
For AAR
6
Basic of SYSTEM drawing of TML
7
Basic of SYSTEM drawing of TML
8
Basic of SYSTEM drawing of TML
2.TS guide line
9
Basic of SYSTEM drawing of TML
10
GEROMETRIC DIMENSION AND TOLERANCING
11
GEROMETRIC DIMENSION AND TOLERANCING
12
Basic of SYSTEM drawing of TML
13
GEROMETRIC DIMENSION AND TOLERANCING
14
GEROMETRIC DIMENSION AND TOLERANCING
3.Drawing systemize
15
GEROMETRIC DIMENSION AND TOLERANCING
3.1 Barrel -1 is project number
3.2 Barrel-2 design group and sub group( refer as TS11812 which 3th& 4th digit
of barrel -2
3.3 Barrel -3 Part designation. The number 16 is for offer drawing in common
parts,00 is fitting ,scheme diagram, 01-05 is assemble drawing
3.4 Barrel -4 is serial number . If have suffix –N meaning for design only
Addition 1.For raw material refer to TS11818 and tool and associated
asperTS11814S3
2. Suffix for color at 2digith
3.Some part number for trail se in TS 11825
4. Some part number for TPL(Technical parts list) shown 10 digit for
special number for project see TS11830 and TS11830S2
5 Some specification shown in drawing can see concept in TS11832
6.Some first barrel is shown projected but not for model of vehicle
but some for main parts design such as axel, engine , etc se in TS11841
7. For another main parts such as frame ,engine to run number
system can see in TS11842
16
Basic of SYSTEM drawing of TML
17
GEROMETRIC DIMENSION AND TOLERANCING
18
GEROMETRIC DIMENSION AND TOLERANCING
19
GEROMETRIC DIMENSION AND TOLERANCING
20
Basic of SYSTEM drawing of TML
Conclusion to know detail in drawing of TML
1. Drawing number is same as part number for purchase or not
2. This is drawing TATA or supplier
3. The revision is lasted or not see in PSW and compare with PLM WEB
4. What point of change in ECN
5. Use original drawing for design or not
6. Have refer drawing or not
7. Shown the mirror drawing or not
8. Have the sub part shown or not
9. The martial with use and standard refer for material such as IS1181or S8840, etc
10. What the dimension of packing shown or not
11. Weight of parts
12. Have special characteristic or not
13. TS or refer standard for testing TS7500. SAE90,FMVSS320
14. Shown the general tolerance or not
15. Shown general surface or not
16. Shown the heat treatment or not identified process and value of
17. Surface treatment apply or not such as SS8850,TS7266
18. Concern the AAR or not see A mark
19. Have texture or not
20. Have point and dimension to control special or not
21
GEROMETRIC DIMENSION AND TOLERANCING
22
GEROMETRIC DIMENSION AND TOLERANCING
23
Basic of SYSTEM drawing of TML
24
GEROMETRIC DIMENSION AND TOLERANCING
ก
25