Professional Documents
Culture Documents
Version Date
GB COS 218 33 1 08/14/2017
Applies to
SD110 Volvo
This Service Bulletin is to be considered as technical information only and is solely applicable for normal warranty in case of
breakdown. Proactive replacement parts are not considered to be normal warranty.
Cause
The engine shock mounts (RM 70932538) exhibit cracking on the bottom surface where the bottom snubbing washer (RM
96746433) contacts the rubber portion of the mounts indicating excess contact due to rebounding loads, see Fig. 1.
Figure 1
Action
Figure 2
A new step washer (VOE12833661) has been introduced to ensure a minimum gap of 3 – 4mm between the bottom of the shock
mounts and the step washer to prevent the rubber from rubbing against the washer.
In case of field repairs, change the bottom side washer with the new step washer, see 1, Fig. 2. The top side washer (RM
96746433) remains the same, see 2, Fig. 2.
Implemented in production
Required parts
Figure 3
This view shows the No Contact gap between the rubber and the washer and shows the Metal to Metal Contact view of the
washer and the metal on the rubber shock mount.