Professional Documents
Culture Documents
Shutdown SIS
Previous Screen
Product: PUMPER
Model: SPS343 PUMPER 8ZZ
Configuration: SPS343 Skid Mounted Pumper 8ZZ00001-UP
Specifications
3512B Engine for SPF343, SPS343, and SPT343 Pumpers
Media Number -RENR4907-06 Publication Date -01/12/2008 Date Updated -03/12/2008
i03125700
S/N - -
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 8.8.2021.
SPS343 Skid Mounted Pumper 8ZZ00001-UP(SEBP3379 - 50) - Product Structure Page 2 of 2
Illustration 1 g01428397
(5) Idler gear assembly
Note: Install the socket setscrew to the bottom of the threaded hole.
(1) Torque for the socket setscrew ... 6 ± 1 N·m (55 ± 9 lb in)
Bore in sleeve bearing after assembly ... 75.000 ± 0.055 mm (2.9528 ± 0.0022 inch)
Diameter of new pump drive shaft assembly ... 74.900 ± 0.015 mm (2.9488 ± 0.0006 inch)
(3) Lubricate the bore of four O-ring seals lightly with lubricant that is being sealed.
Thickness of new thrust washer ... 8.50 ± 0.05 mm (0.335 ± 0.002 inch)
Width of groove in new pump drive shaft assembly ... 8.750 ± 0.025 mm (0.3445 ± 0.0010 inch)
End play for the pump drive shaft assembly ... 0.250 ± 0.075 mm (0.0098 ± 0.0030 inch)
(8) Shaft
Bore in sleeve bearing after machining ... 90.000 ± 0.010 mm (3.5433 ± 0.0004 inch)
Diameter of new shaft ... 89.88 ± 0.02 mm (3.539 ± 0.001 inch)
Note: After the sleeve bearing is installed in the gear the sleeve bearing must be machined to size.
Copyright 1993 - 2021 Caterpillar Inc. Sun Aug 8 13:10:25 UTC+0200 2021
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 8.8.2021.