Professional Documents
Culture Documents
Page 1 of 2
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 385B EXCAVATOR CLS00242
Configuration: 385B & 385B L Excavators CLS00001-UP (MACHINE) POWERED BY 3456 Engine
Specifications
385B and 5090B Excavators Machine System Specifications
Media Number -RENR5463-04 Publication Date -01/04/2007 Date Updated -04/04/2007
i03473140
Bucket Cylinder
SMCS - 5457
S/N - CLS1-UP
S/N - FDL1-UP
S/N - MYA1-UP
S/N - RCD1-UP
Illustration 1 g01801713
(A) Bore of the cylinder assembly ... 220.00 ± 0.10 mm (8.661 ± 0.004 inch)
https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 3.2.2015.
385B & 385B L Excavators CLS00001-UP (MACHINE) POWERED BY 3456 Engin... Page 2 of 2
(B) Diameter of the rod ... 149.930 ± 0.030 mm (5.9027 ± 0.0012 inch)
(C) Bore of the head over two lands ... 150.630 ± 0.030 mm (5.9303 ± 0.0012 inch)
(3) Lubricate the sealing lip of the buffer seal lightly with the lubricant that is being sealed.
(4) Lubricate the sealing lip of the U-cup seal lightly with the lubricant that is being sealed.
(5) Lubricate the sealing lip of the lip type seal lightly with the lubricant that is being sealed.
(6) Apply 4C-4032 Bearing Mount Compound to the wiper seal groove before assembly.
(7) Use any one of the following methods to tighten the locknut:
Lubricate the threads of the locknut with 248-7522 Hydraulic Oil and tighten to the following
torque. ... 15700 ± 800 N·m (11580 ± 590 lb ft)
Lubricate the threads of the locknut with molybdenum disulfide and tighten to the following
torque. ... 13500 ± 700 N·m (9960 ± 520 lb ft)
(8) Lubricate the inside diameter and the outside diameter of three rings with clean grease.
(9) Lubricate the inside diameter and the outside diameter of the seal assembly with clean grease.
Copyright 1993 - 2015 Caterpillar Inc. Tue Feb 3 17:11:44 UTC+0100 2015
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 3.2.2015.