Professional Documents
Culture Documents
Shutdown SIS
Previous Screen
Specifications
3406B INDUSTRIAL & MARINE ENGINES
Media Number -SENR4022-01 Publication Date -01/08/1986 Date Updated -11/10/2001
Turbocharger
(T12)
NOTICE
Do not bend or add stress to the shaft when the nut is loosened or
tightened.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 3/12/2017
Media Search - SENR4022 - 3406B INDUSTRIAL & MARINE ENGINES Page 2 of 2
(2) Torque for the bolts that hold the thrust plate ... 4.5 ± 0.6 N·m (40 ± 5 lb.in.)
(3) Torque for the clamp bolts ... 14 ± 1 N·m (10 ± 1 lb.ft.)
(4) Torque for bolts of turbine housing (put 5P3931 Anti-Seize Compound on threads of bolts) ... 20
± 1 N·m (15 ± 1 lb.ft.)
(5) Torque for four nuts (put 5P3931 Anti-Seize Compound on threads) ... 55 ± 5 N·m (40 ± 4 lb.ft.)
(7) Bore in the bearing (new) ... 15.921 to 15.931 mm (.6268 to .6272 in.)
(8) Bore in housing (new) ... 24.961 to 24.973 mm (.9827 to .9832 in.)
Outside diameter of the bearing (new) ... 24.841 to 24.854 mm (.9780 to .9785 in.)
(9) Clearance between ends of oil seal ring ... 0.20 to 0.38 mm (.008 to .015 in.)
Copyright 1993 - 2017 Caterpillar Inc. Sun Mar 12 04:29:38 UTC+0700 2017
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 3/12/2017