Professional Documents
Culture Documents
Page 1 of 6
Fechar o SIS
Tela anterior
Especificações
C4.4 (Mech) Engines for Caterpillar Built Machines
Número de Mídia -KENR9208-07 Data de Publicação -01/12/2014 Data de Atualização -09/03/2016
i02662539
Camshaft
SMCS - 1210
S/N - BWC1-UP
S/N - DPH1-UP
S/N - DSK1-UP
S/N - DXC1-UP
S/N - EME1-UP
S/N - FAP1-UP
S/N - FBN1-UP
S/N - FLY1-UP
S/N - GAP1-UP
S/N - HXB1-UP
S/N - JBA1-UP
S/N - L221-UP
S/N - L241-UP
S/N - LBH1-UP
S/N - LDH1-UP
S/N - LDY1-UP
https://127.0.0.1:449/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 23/09/2019
416E Backhoe Loader Single Tilt Center Pivot MFG00001-UP (MACHINE) POWER... Page 2 of 6
S/N - LJJ1-UP
S/N - LKH1-UP
S/N - LMS1-UP
S/N - LNH1-UP
S/N - LNR1-UP
S/N - LTG1-UP
S/N - LYA1-UP
S/N - LYB1-UP
S/N - LYC1-UP
S/N - LYD1-UP
S/N - LYE1-UP
S/N - LYF1-UP
S/N - LYG1-UP
S/N - LYJ1-UP
S/N - LYK1-UP
S/N - MAW1-UP
S/N - MFG1-UP
S/N - NBA1-UP
S/N - PCR1-UP
S/N - RXS1-UP
S/N - SEF1-UP
S/N - SEJ1-UP
S/N - SJL1-UP
S/N - SJW1-UP
S/N - SXB1-UP
S/N - TMS1-UP
https://127.0.0.1:449/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 23/09/2019
416E Backhoe Loader Single Tilt Center Pivot MFG00001-UP (MACHINE) POWER... Page 3 of 6
Illustration 1 g01277351
Checking the end play of the camshaft
(1) End play of a new camshaft ... 0.10 to 0.55 mm (0.004 to 0.022 inch)
Maximum permissible end play of a worn camshaft ... 0.60 mm (0.023 inch)
Illustration 2 g01277354
Typical camshaft
(2) Bolt
Tighten the bolt to the following torque. ... 95 N·m (70 lb ft)
https://127.0.0.1:449/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 23/09/2019
416E Backhoe Loader Single Tilt Center Pivot MFG00001-UP (MACHINE) POWER... Page 4 of 6
Thickness of the thrust washer ... 5.49 to 5.54 mm (0.216 to 0.218 inch)
Depth of the recess in the cylinder block for the thrust washer ... 5.54 to 5.64 mm
(0.218 to 0.222 inch)
Tolerance of the thrust washer in cylinder block front face ... −0.154 to −0.003 mm
(−0.0006 to −0.0001 inch)
(4) The diameters of the camshaft journals are given in the following table.
Table 1
Diameters of Camshaft Journals
Camshaft Journals Standard Diameter
1 50.711 to 50.737 mm (1.9965 to 1.9975 inch)
2 50.457 to 50.483 mm (1.9865 to 1.9875 inch)
3 49.949 to 49.975 mm (1.9665 to 1.9675 inch)
https://127.0.0.1:449/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 23/09/2019
416E Backhoe Loader Single Tilt Center Pivot MFG00001-UP (MACHINE) POWER... Page 5 of 6
Illustration 3 g01345411
Typical example
Naturally aspirated
Turbocharged
Turbocharged aftercooled
https://127.0.0.1:449/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 23/09/2019
416E Backhoe Loader Single Tilt Center Pivot MFG00001-UP (MACHINE) POWER... Page 6 of 6
2. By using a dial indicator in contact with the surface of the lobe, rotate the camshaft and
record the maximum and minimum lift.
Note: There may be two lobes on the camshaft. Refer to illustration 3. The surface between
the lobes may not return to the radius of the base circle. Using a micrometer to measure the
diameter of the base circle may give a inaccurate result.
3. Subtract the smallest dimension from the largest dimension. The difference is the actual
camshaft lobe lift.
Maximum permissible deviation between the actual lobe lift and the specified lobe lift of a new
camshaft ... 0.05 mm (0.002 inch)
Direitos Autorais 1993 - 2019 Caterpillar Inc. Mon Sep 23 09:45:17 UTC-0300 2019
Todos os Direitos Reservados.
Rede Particular Para Licenciados SIS.
https://127.0.0.1:449/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 23/09/2019