Professional Documents
Culture Documents
Previous Screen
Welcome: j570ldn
Product: INDUSTRIAL ENGINE
Model: C-16 INDUSTRIAL ENGINE BFM01896
Configuration: C-16 Industrial Engine BFM00001-UP
Specifications
C-15 and C-16 Industrial Engines
Media Number -RENR2348-04 Publication Date -01/04/2004 Date Updated -20/04/2004
i03922075
Cylinder Head
SMCS - 1100
Illustration 1 g01025099
The bolts that are marked "X" are 216 mm (8.5 inch) long. The lengths of the remaining bolts are 194 mm (7.6
inch) long.
Apply 6V-4876 Lubricant to the bolt threads and both sides of the washers. Tighten the bolts in the following
step sequence:
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/… 1/5
22/1/2019 C-16 Industrial Engine BFM00001-UP(SEBP3260 - 53) - Documentation
Note: The flatness of the cylinder head should be within a total of 0.13 mm (.005 inch). Also, the flatness of the
cylinder head should be within a maximum of 0.05 mm (.002 inch) for any 150 mm (6.0 inch) span.
Illustration 2 g01322887
Thickness of a new cylinder head ... 120.00 ± 0.15 mm (4.724 ± 0.006 inch)
Minimum thickness of a used cylinder head ... 119.50 mm (4.705 inch)
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/… 2/5
22/1/2019 C-16 Industrial Engine BFM00001-UP(SEBP3260 - 53) - Documentation
Illustration 3 g01322895
(27) Oil gallery
NOTICE
Camshaft bearings must be installed into their correct position. Failure
to do so will result in engine damage.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/… 3/5
22/1/2019 C-16 Industrial Engine BFM00001-UP(SEBP3260 - 53) - Documentation
Illustration 4 g01323077
(B) Orientation of bearing joint
(C) Diameter of camshaft bore ... 90.985 ± 0.020 mm (3.5821 ± 0.0008 inch)
Illustration 5 g01520165
The depth of installation of the sleeve bearings is important. Install sleeve bearings (4) to the following depths:
Copyright 1993 - 2019 Caterpillar Inc. Tue Jan 22 2019 14:22:50 GMT+0700 (Giờ Đông Dương)
All Rights Reserved.
j570ldn
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/… 5/5