C-15 Truck Engine MBN00001-UP(SEBP3680 - 22) - Document Structure Стр.

1 из 3

Shutdown

Previous Screen

Product: TRUCK ENGINE

Model: C-15 TRUCK ENGINE MBN
Configuration: C-15 Truck Engine MBN00001-UP

Disassembly and Assembly

C-15 On-Highway Engine
Media Number -SENR9689-02 Publication Date -01/08/2004 Date Updated -03/08/2004

i01933884

Accessory Drive - Assemble

SMCS - 1207-016

Assembly Procedure
Table 1

Required Tools
Tool Part Number Part Description Qty
A 2P-8312 Retaining Ring Pliers 1

NOTICE
Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

Note: Before installation, check the condition of the O-ring seal. If the O-ring seal is worn or
damaged, use a new part for replacement.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 24.05.2007
C-15 Truck Engine MBN00001-UP(SEBP3680 - 22) - Document Structure Стр. 2 из 3

Illustration 1 g00620817

1. Position plate (3) on gear (4).

2. Install bearing (2) on gear (3) with a press and socket (1) or pipe that is the same diameter as
the inner race of bearing (2) .

Illustration 2 g00620866

3. Rotate gear (4) and install bearing (5) with socket (1) or pipe and a press. Install the retaining
ring with Tooling (A) .

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 24.05.2007
C-15 Truck Engine MBN00001-UP(SEBP3680 - 22) - Document Structure Стр. 3 из 3

Illustration 3 g00620913

4. Position gear (4) in adapter (8). Position plate (3) on adapter (8) and install bolts (6) .

5. Put clean engine oil on the O-ring seal (7). Install O-ring seal (7) in adapter (8) .

End By: Install the accessory drive. Refer to Disassembly and Assembly, "Accessory Drive -
Install".

Copyright 1993 - 2007 Caterpillar Inc. Thu May 24 09:59:58 UTC+0400 2007
All Rights Reserved.
Private Network For SIS Licensees.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 24.05.2007