Professional Documents
Culture Documents
Document history
Abstract
This document describes how to install and set up hardware and software for
the DXU screening test system LPA 107 585/1.
Application
Contents
1 PC 3
1.1 PCI90 3
1.2 GPIB Board 3
1.3 Test Software Installation 4
2 Instruments 5
2.1 Power Supply 6643A 5
2.2 Power Supply LTN 214 437/2 5
2.3 Frequency Counter 53131A 5
3 Connections 5
4 Maintenance 5
5 References 5
6 Terminology 5
Ericssonwide Internal
INSTALLATION INSTRUCTION 3 (5)
Prepared (also subject responsible if other) No.
1 PC
Be sure that the PC is installed with WIN2000 English version and at least it
has two PCI slot.
1.1 PCI90
Mount the PCI90 card (I2C) in an empty PCI slot in the PC. Then install the
driver according to the PCI90 manual.
Mount the GPIB card in an empty PCI slot in the PC. Use the Software
National Instruments NI-488.2 for Windows version 1.60 or newer for
Windows 95/98/NT/2000. Install the Driver and Application software in the
default directory. Restart the Computer. Go to the Control panel and start
GPIB.
[Configure]:
Files needed (can be found in 3/152 01- for selected BOE unit):
1) Copy the file Wib.ini from 190 89-CAL 120 2631/1 to your windows
directory.
2 Instruments
2.1 Power Supply 6643A
Connect the power supply to the Adapter Board according to [ref 1].
3 Connections
Connect the cables according to [ref 1]
4 Maintenance
Visual inspection of the cables. Replace them when needed.
5 References
[ref 1] 1913-LTM 902 561/1 Ux
6 Terminology
PC Personal Computer
SW Software