DeKalb Metal Finishing tested Aquence Coatings panel matrix with a thickness between 13 to 18 um. The panels underwent salt spray testing for 336 hours and 16 corrosion resistance cycles. Additional testing included 10 cycles of automotive paint adhesion testing and 30 cycles of corrosion resistance testing. Panels showed initial and 240 hour humidity adhesion as well as passing cure tests and chip resistance evaluations. Fluid resistance testing was done with common cleaners, insect repellent, suntan lotion, water and soap, and for grease resistance. Abrasion and mar resistance were also analyzed.
DeKalb Metal Finishing tested Aquence Coatings panel matrix with a thickness between 13 to 18 um. The panels underwent salt spray testing for 336 hours and 16 corrosion resistance cycles. Additional testing included 10 cycles of automotive paint adhesion testing and 30 cycles of corrosion resistance testing. Panels showed initial and 240 hour humidity adhesion as well as passing cure tests and chip resistance evaluations. Fluid resistance testing was done with common cleaners, insect repellent, suntan lotion, water and soap, and for grease resistance. Abrasion and mar resistance were also analyzed.
DeKalb Metal Finishing tested Aquence Coatings panel matrix with a thickness between 13 to 18 um. The panels underwent salt spray testing for 336 hours and 16 corrosion resistance cycles. Additional testing included 10 cycles of automotive paint adhesion testing and 30 cycles of corrosion resistance testing. Panels showed initial and 240 hour humidity adhesion as well as passing cure tests and chip resistance evaluations. Fluid resistance testing was done with common cleaners, insect repellent, suntan lotion, water and soap, and for grease resistance. Abrasion and mar resistance were also analyzed.