systemair
SIPL/8.6/F53/RO
TEST CERTIFICATE
Ref: SIPL/APPL/2101-0834-A-1 Date: 29/01/2021
Invoice No.: ‘ Date
This is to certify that the following material ordered against M/s Anemo Projects Pvt.
Ltd. against P.O. No. RI-M-887-APPL-GGN-SIPL-NTPC Lara & Darlipali dated
09/01/2021 against Project: NTPC Darlipali are manufactured in accordance with our
standard dimensional drawings. These have been tested for the quality parameters as
given below and found O.K.
1. Powder coated (RAL 9010) Al. structured adjustable double louver Grille, hole on
flange, with Al. collar damper. Model: 2H + Al. OBSS
NECK SIZE (mm) QUANTITY (Nos.)
600 x 200 63 Nos.
1000 x 350 19 Nos.
Parameters are checked:-
S.No| Description Characteristics Status
1 | Visual Surface Defects Found Satisfactory
Inspection
2 | Dimensional | Measurements Within tolerance limit
3 | Raw Material | Surface Finish/ | Surface finish found satisfactory
Dimensions/ Dimensions are within tolerance
Chemical Properties _| Reports found satisfactory
4 | Components | Surface Finish/ | Surface finish found satisfactory
Dimensions Dimensions are within tolerance
5 | Blanking & | Dimensions & overall | Dimensions are in tolerance limit /
|__| cutting finish surface finish found satisfactory
6 | Fabrication Dimensions &/1- Dimensions observed within
Surface finish tolerance limit,
2- Surface finish found visually
| satisfactory.
7 | Final Over all finish and | Over all finish and powder coated
Inspection powder coated finish | finish found satisfactory.
Systema india Pvt. Ltd, Te: +91-120-4763100 naboxensystemaiin eg to
‘Wegeae cheers eo Fou: soic36.a76H 01 snewaynema U3toeeo.2e07erc 64074
Prt.” 3 Secor 31 Eectec (30'9001 2015 costed)
aba Gite Nea (UF) 301908
{ranstev ot Araipsmated Companies Rais inse PL. neratonal AxCondioring Predicts PL & Syste Sono Pk LA)
Sse rane en yA. rl Bests Ca pnb et ocsystemair
TEST CERTIFICATE
SIPL/8.6/F53/RO
Ref: SIPL/APPL/2101-0834-B-1
Invoice No.
This is to certify that the following material ordered against M/s Anemo Projects Pvt.
Ltd. against P.O. No RI-M-887-APPL-GGN-SIPL-NTPC Lara & Darlipali dated
09/01/2021 against Project: NTPC Darlipali are manufactured in accordance with our
standard dimensional drawings. These have been tested for the quality parameters as
given below and found O.K.
1. Powder coated (RAL 9010) Al. structure standard type square diffuser with
AL. collar damper. Model: DF-S + AL. OBSS
NECK / OUTER SIZE (mm) QUANTITY (Nos.)
450 x 450/595 x 595 24 Nos.
Parameters are checked:~
S.No | Description Characteristics Status
1 | Visual Surface Defects Found Satisfactory
Inspection
2 | Dimensional | Measurements Within tolerance limit
3 | Raw Material | Surface Finish/ | Surface finish found satisfactory
Dimensions/ Dimensions are within tolerance
‘Chemical Properties _| Reports found satisfactory.
4 | Components Finish/ | Surface finish found satisfactory
Dimensions are within tolerance
5 |Punching & s & overall | Dimensions are in tolerance limit/
cutting surface finish found satisfactory
6 |Fabrication | Dimensions &/1- Dimensions observed within
Surface finish tolerance limit.
2- Surface finish found visually
satisfactory.
7 | Final Over all finish/ | Over all finish and powder coating
Inspection Powder coating finish | finish found satisfactory.
Tat: o91-320-a740100 maltontesystenstin eg. No
ie Ss (09001 2015 conted)
(Translre of Analemates Comparie Ravistr nde FLA. nlematonalAeCondorig Products PM Lid Syea Soa PL. LN)
‘neq Oe 2, Cones Cpls, Moyo Goren aus, New Den” 1001Ssystemair
SIPL/8.6/F53/RO
TEST CERTIFICATE
Ref: SIPL/APPL/2101-0834-C-1 Date: 29/01/2021
Invoice No. ' Date:
This is to certify that the following material ordered against M/s Anemo Projects Pvt.
Ltd. against P.O. No. RI-M-887-APPL-GGN-SIPL-NTPC Lara & Darlipali dated
09/01/2021 against Project: NTPC Darlipali are manufactured in accordance with our
standard dimensional drawings. These have been tested for the quality parameters as
given below and found O.K.
1. Powder coated (RAL 9010) Al. structure grid type square diffuser without
damper. Model: DF-G
NECK / OUTER SIZE (mm) QUANTITY (Nos.)
525 x 525 / 595 x 595 24 Nos,
Parameters are checked:- 4
S.No |_Deserip Characteristies ___ Status
1 | Visual Surface Defects Found Satisfactory
Inspection
2 | Dimensional _ | Measurements Within tolerance limit
3 | Raw Material | Surface Finish/ | Surface finish found satisfactory
Dimensions/ Dimensions are within tolerance
Chemical Properties _| Reports found satisfactory.
4 | Components | Surface Finish/ | Surface finish found satisfactory
ensions Dimensions are within tolerance
5 |Punching & ensions & overall | Dimensions are in tolerance limit/
cutting finish surface finish found satisfactory
6 | Fabrication | Dimensions &/1- Dimensions observed within
Surface finish tolerance limit.
2- Surface finish found visually
satisfactory.
Over all finish/| Over all finish and powder coating
Powder coating finish | finish found satisfactory.
ia Put i. Tot -91-120-4763100 msiton@systemaici eg.
% STEM AM ENS PY LTD) Fox oicnap.a7eai0 ncystamaeln| Usto0HoL2007er62074
Fotno.” 3 Secor 39 eeteeh {Uso scot 2018 cried)
Fanon rete ida (UP) 201208
(Cranstere of Arsiporie Cornanles Raver nde Pu. Li, trata AxConclonig Profucs PL Sysana Seware PML)
Snes Ofc Pane, Nola Greate Nod, Abmedsbe, Muna Garay, Rokaa, Wyerabaa- Chea 6 Roa
‘egg Orie 2: Commer! Capen, Miya Gude Haus, Naw Oo TOOTsystemair
SIPL/8.6/F53/RO
TEST CERTIFICATE
Ref: SIPL/APPL/2101-0834-G-1 Date: 29/01/2021
Invoice No. Date:
This is to certify that the following material ordered against M/s Anemo Projects Pvt.
Ltd. against P.O, No. RI-M-887-APPL-GGN-SIPL-NTPC Lara & Darlipali dated
09/01/2021 against Project: NTPC Darlipali are manufactured in accordance with our
standard dimensional drawings. These have been tested for the quality parameters as
given below and found O.K.
1, 20/22g Powder coated (RAL 9010) GI Structured Fresh Air Louvre small format
with Bird Screen. Model: YG-G1
NECK SIZE (mm) QUANTITY (Nos.)
800 x 550 02 Nos.
700 x 500 01 No.
1000 x 1000 02. Nos.
2000 x 1500 — two equal parts 05 Nos.
Parameters are checked:
S.No| Description Characteristics Status
1 | Visual Inspection | Surface Defects Found Satisfactory
2 | Dimensional Measurements Within tolerance limit
3 | Raw Material | Surface Finish/ | Surface finish found satisfactory
Dimensions/ Chemical | Dimensions are within tolerance
z Properties Reports found satisfactory.
4 | Components Surface Finish/ | Surface finish found satisfactory
Dimensions Dimensions are within tolerance
5 | Blanking & | Dimensions & overall | Dimensions are in tolerance limit
cutting finish J surface finish found satisfactory |
6 | Fabrication Dimensions & Surface | 1- Dimensions observed within
finish tolerance
2- Surface finish found visually
satisfactory.
7 [Final Inspection | Over all finish/| Over all finish and powder
powder coating finish | coating finish found satisfactory.
(Quality Assur
Systemair‘India
Systema nd Pvt Ld tet 91-tzo-reanoo athondestensiin fe. No.
(Comet sSTEnag He PLT) Be itae dren Sirnysanaeie Us9blocucreresesors
Fratn 3: sector 3) coe (Gose01: 2045 certed)
acta Getter Nowa (UP) 201308
‘Cranteroeof Amalgamated Companies Rava ia Pu.
Iniaratone ArCondoning Products PV Li & Syst Software BL)
ub, erga, KOK, Ryderabog, cena & Koa
Maya Garden, Hausny New Ou NCOsystemair
SIPL/8.6/F53/RO
TEST CERTIFICATE
Ref: SIPL/APPL/2101-0834-D-1 Date: 29/01/2021
Invoice No.: Date:
This is to certify that the following material ordered against M/s Anemo Projects Pvt.
Ltd. against P.O. No. RI-M-887-APPL-GGN-SIPL-NTPC Lara & Darlipali dated
09/01/2021 against Project: NTPC Darlipali are manufactured in accordance with our
standard dimensional drawings. These have been tested for the quality parameters as
given below and found O.K.
1. 18/20swg GI Volume Control Damper with 30mm flanges & V- type blades,
suitable linkage, manual operation. Model: GI VCD
NECK SIZE (mm) QUANTITY (Nos.)
1100 x 1000 01 No.
1800 x 900 01 No.
500 x 300 01 No.
1150 x 600 02 Nos.
1150 x 800 01 No.
900 x 450 02 Nos.
2500 x 650 OLNo.
1200 x 850 O1 No.
1050 x 750 01 No.
Parameters are checked:-
No Description Characteristics Status
1 _| Visual Inspection Surface Defects Found Satisfactory
2_| Dimensional Measurements Within tolerance limit
3__| Painting on Welded joints | Visual Surface finish found satisfactory
4 | Damper operation Performance Operation found smooth
5 | Material 18/20g GI Sheet | Physical & chemical | Reports found satisfactory as per
test (chemical | test done by manufacturer! Govt.
composition) approved lab.
6 | Bronze Bushes Visual &/1- Dimensions observed within
Operational tolerance limit.
2- Operation found satisfactory
7 | Plated pins, & Fasteners _| Dimensions &/1- Dimensions observed within
Surface finish tolerance limit.
2- Surface finish found visually
satisfactory.
systema ndla Pot, Ld rots epi-s2047ea100 troten@esemston eg. na
etna 109 Bai tovtgecareatoy Sessa Seto aurerioy
Fon rier ld (UP) 201908
{Cranstre ot Aaiamats Compan Revs nda Pu. Lt. eratnal AkContoning Prods Pt LM. & SytameeSaware PL)
Sees Of Pune, Rota, Gee Nod Amecaba, uri, tanga Kola, yerabeq Chena & Rac
fogs Oia: 2: Commer Cmpoy, Wiyiaw Garden, Hautes Hew Oa 470D46systemair
‘TEST CERTIFICATE
SIPL/8.6/F53/RO
Ref: SIPL/APPL/2101-0834-1
Invoice N
Date: 29/01/2021.
Date: .,
This is to certify that the following material ordered against M/s Anemo Projects Pvt.
Ltd. against P.O, No. RI-M-887-APPL-GGN-SIPL-NTPC Lara & Darlipali dated
09/01/2021 against Project: NTPC Darlipali are manufactured in accordance with our
standard dimensional drawings. These have been tested for the quality parameters as
given below and found O.K.
1, 18/20swg GI Volume Control Damper with 30mm flanges & V- type blades,
suitable linkage, motorized operation, Belimo make actuator model NFA S2
factory fitted. Model: GI VCD
NECK SIZE (mm) QUANTITY (Nos.)
1100 x 1100 02 Nos.
Parameters are checked:-
S.No Description Characteristics Status
1 | Visual Inspection | Surface Defects Found Satisfactory
2 | Dimensional Measurements Within tolerance limit
3 | Painting on Welded | Visual Surface finish found
joints satisfactory
4 |Damper operation | Performance Operation found smooth
5 | Material 18/20g GI] Physical & chemical | Reports found satisfactory as
Sheet test (chemical | per test done by manufacturer
composition) Govt. approved lab.
6 | Bronze Bushes Visual & | 1- Dimensions observed wit
Operational tolerance limit.
2- Operation found satisfactory
7 |Plated pins, & | Dimensions & | 1- Dimensions observed within
Fasteners Surface finish tolerance limi
2- Surface finish found visually
satisfactory. :
Systomaie india Pvt.Ltd, et e01-y20-4760300 mattontystersiin eg tn
(Hamery: SYSTEMAR EANS PVT.LTD) Fax: 91-120-4763101 ‘eorasystemavin USte08012007Prc ¢074
arte Second eae {5090012015 cated
aa (UP) = 201308
ot Amalgamated Companies Rava in Pt. Li armatenlArCondoning Precis Pt Li. & Sys Setar PL)
ales Oi Fue ods, Greater Hota. Afeabad, anal, Sendo, Kalla yderebod, Chea & Face
‘ad One “2, Conereril Comoe May Gtéen, Hassan, Nou! eth HOOT
(ana#€) systemair
TEST CERTIFICATE
SIPL/8.6/F53/RO
Ref: SIPL/APPL/2101-0834-E-1
Invoice No.:
Date: 29/01/2021
This is to certify that the following material ordered against M/s Anemo Projects Pvt.
Ltd. against P.O. No. RI-M-887-APPL-GGN-SIPL-NTPC Lara & Darlipali dated
09/01/2021 against Project: NTPC Darlipali are manufactured in accordance with our
standard dimensional drawings. These have been tested for the quality parameters as
given below and found O.K.
1. 18/20g GI Structured non retum damper, suitable linkage, Duct mounted.
Model: GL GI
NECK SIZE (mm) QUANTITY (Nos.)
1100 x 1100 02. Nos.
960 x 221 02. Nos.
Parameters are checked:-
S.No | Description Characteristics Status
1 | Visual Surface Defects Found Satisfactory
Inspection
2 [Dimensional | Measurements Within tolerance limit
3 | Raw Material | Surface Finish/ | Surface finish found satisfactory
Dimensions/ Chemical | Dimensions are within tolerance
Properties Reports found satisfactory
4 | Components | Surface Finish/ | Surface finish found satisfactory
Dime Dimensions are within tolerance
5 [Punching & | Dimensions & overall | Dimensions are in tolerance limit/
cutting finish surface finish found satisfactory
6 | Fabrication Dimensions & Surface | 1- Dimensions observed within
finish tolerance limit.
2- Surface finish found visually
satisfactory.
7 | Final Inspection | Over all finish Over all finish found satisfactory.
systemait india Put. i, sets sorrzo-reanoo ntton@esemaian fa.
ermay syste 70) Baitotandrasne) ioasonae ie tiocanereresaior4
froth Sat act Garcon: 2015 cenea)
aun, Genter ao (UP) = 201308
{Cranooe of Aagemsiad Comparis Ravine Pt i lations ACondtoning Produc Pet Ll & Systm Soar PL Li)
Soe srr ih aon Abeted Mun Brgy, aaa ye sn Cheal 6 a#2 systemair
SIPL/8.6/F53/RO
TEST CERTIFICATE
Ref: SIPL/APPL/2101-0834-H-1
Invoice N
This is to certify that the following material ordered against M/s Anemo Projects Pvt.
Led. against P.O. No. RI-M-887-APPL-GGN-SIPL-NTPC Lara & Darlipali dated
09/01/2021 against Project: NIPC Darlipali are manufactured in accordance with our
standard dimensional drawings. These have been tested for the quality parameters as
given below and found O.K,
1. Powder coated (Off White) Al. structured pressure relief damper, pressure 50Pa.
Model: PRD
NECK SIZE (mm) QUANTITY (Nos.)
900 x 900 13 Nos.
600 x 600 09 Nos.
700 x 700 08 Nos.
Parameters are checked:
S.No | Description | Characteristics Status
1 | Visual Surface Defects Found Satisfactory
Inspection
[2 | Dimensional | Measurements Within tolerance limit
3 | Raw Material | Surface Finish/ | Surface finish found satisfactory
Dimensions/ Dimensions are within tolerance
Chemical Properties | Reports found satisfactory
according to 6063 Al. alloy
ih/ | Surface finish found satisfactory
4 [Components | Surface
Dimensions Dimensions are within tolerance
5 Blanking & | Dimensions & overall | Dimensions are in tolerance limit /
cutting finish. surface finish found satisfactory
6 Fabrication Dimensions &/1- Dimensions observed within
Surface finish tolerance limit.
2- Surface finish found visually
satisfactory.
Over all __finish/ | Over all finish and powder coating
Powder coating finish | finish found satisfactory.
Systemair india Pvt. ted. Te: +91-120-4763100 nattoxensystesiein op No
Aone SeSIEMAR Fan PUT. TO) Fou. Sotcia0.a76308 ‘ores U3i9ee0.20070rc 64074
Prat io 3, Sacior=3eectech (0900172015 centeg)
Fa eae ado (UP) = 201308
Chenstv ot Analyste Compares Ravstr nda PL. aena ACendtoing Products Pt Lid & Sy Stare Pvt Lt)
53) Off Pune, Hos, emo, Aenevabag, Numa Bergauu, Kaa Tyeaba Cheval 6 KN
‘age ie! 2: Commer omen, Maya Garden Hawes New Bah GOI