You are on page 1of 1

BACK

BACK
Technical Service Information
TOYOTA A140
OVERDRIVE UNIT
Inside of each of the pinion pins in the overdrive unit is a plug to retain lube oil for the overdrive unit. These
plugs are held in place by the No. 3 thrust washer (See Figure 1).
A loss of any of these plugs during the rebuilding or cleaning process will cause complete destruction of the
entire overdrive unit. These plugs deserve your utmost attention.

Figure 1
Copyright © 2000 ATSG

88-56
AUTOMATIC TRANSMISSION SERVICE GROUP Page 1 of 1

You might also like