You are on page 1of 4

SOLENOID VALVE

A solenoid valve is an electromechanically operated valve. The valve is


controlled by an electric current through a solenoid. Their tasks are to shut off,
release, dose, distribute or mix fluids.

They are found in many application areas. Solenoids offer fast and safe
switching, high reliability, long service life, good medium compatibility of the
materials used, low control power and compact design.

2 Shown here diagrammatically, the media controlled by the solenoid valve


enters the valve through the inlet. The media must flow through the orifice
between inlet and outlet.
The solenoid valve that we intend to use is normally closed type and the fluid,
before continuing into the outlet port must go through the orifice which is
closed and opened by the plunger.

The plunger in turn is controlled by a magnetic coil in which the change of


magnetic field opens or closes the plunger. The constant availability of current
to the valve is mandatory.

ADVANTAGES:

FCD Series solenoid valve for water dispenser, water purifier

* Normal close pilot type

* Edible food grad health level plastic

* Working Medium public using water

* Port Size G1/4” NPT1/4 Jaco connector

* Thread connect type or quick push-in connect for option


* Direct socket electricity connection or wire out-lead connecting for option

* Fast respond ,low noise ,low consumption

* Stable design ,long serve life

FEATURES AND TECHNICAL INFORMATION

Apply to RO Reverse Osmosis system home using water


dispenser , commercial application water purifier, pipeline machine, drinking
water machine, coffee machine etc

1, Structure: Pilot type Normal Closed

2, Port size:G1/4 or NPT1/4 female Jaco connector, Or Quick push-in 1/4 Inch
Hose

3, Voltage :DC12V,DC24V,DC36V,DC230V,AC110V,AC220V

4, Working Water pressure: 0~0.8Mpa

5,Working Medium:1~100℃ Public using water

6,Water pressure endurance: Tested 2.0Mpa for 10Minutes no abnormity

7,Coil free mounting

8,Life cycle:100000 cycles

9,For control the waste water ,must to match with the Flow Restrictor
DRAWING OF SOLENOID VALVE:

You might also like