Professional Documents
Culture Documents
Andritz Ritz Pump
Andritz Ritz Pump
www.andritz.com
02
Industry Sewage
For over 125 years, the name ANDRITZ Ritz has stood for the highest reliability
and quality Made in Germany.
With our extensive product line, we support our customers worldwide in success-
fully mastering demanding pumping tasks in the fields of water supply, mining,
industry and sewage.
Contents
Pumps for water supply 06
Pumps for mining 08
Pumps for industry 10
Pumps for sewage 12
Water supply
HDM. Heavy Duty Mining
Mining
WinPump 28
Additional product information 29 Industry
Sewage
06
Design 01 | 03 | 04 07 45 | 46 | 49 | 55 56 | 62 | 63 | 64 | 66
Water supply
t up to +140°C up to +110°C up to +140°C up to +75°C
Materials grey cast iron, grey cast iron, ductile grey cast iron, grey cast iron,
bronze, ductile iron, iron, duplex stainless bronze, aluminium bronze, aluminium
stainless steel steel bronze, stainless bronze, stainless
steel steel
High heads
Large capacities
High operational reliability
Maintenance-free solutions
High-quality material designs
Long service life
High efficiency
Flexible adaptation to changing pumping conditions with
MS-T – Modular Shaft Technology (more on page 17)
Solutions for the most extreme operating conditions with
HDM – Heavy Duty Mining (more on page 19)
09
Design 56 | 62 | 63 | 64 | 66 61 | 67 | 68 45 | 46 | 49 | 55
Mining
Materials grey cast iron, bronze, ductile iron, aluminium grey cast iron, bronze,
aluminium bronze, bronze, duplex stain- aluminium bronze,
stainless steel less steel stainless steel
* An ideal drive for the SUs and HDMs are the SM submersible
motors. More information on these is available on page 20.
Design 01 | 03 | 04 45 | 46 | 49 | 55 56 | 62 | 63 15 | 35 | 38 | 39 22 | 26 | 59
64 | 66
Q up to 4,000 m3/h up to 800 m3/h up to 500 m3/h up to 10,000 m3/h up to 2,600 m3/h
n up to 3 600 rpm up to 3 600 rpm up to 3 600 rpm up to 3 600 rpm up to 3 600 rpm
Materials grey cast iron, grey cast iron, grey cast iron, grey cast iron, grey cast iron,
bronze, ductile bronze, aluminium bronze, aluminium stainless steel stainless steel
iron, stainless bronze, stainless bronze, stainless
steel steel steel
More information on
these is available on
page 20.
Design 15 | 35 | 38 | 39 22 | 26 | 59
H up to 100 m up to 80 m
p up to 15 bar up to 10 bar
t up to +140°C up to +40°C
Materials grey cast iron, stainless steel grey cast iron, stainless steel
Sewage
ES ES ES
Design: 03 | Norma Design: 01 | Norma supplement Design: 04 | RITZBloc
Type: Single-stage volute casing pumps with Type: Single-stage volute casing pumps. Type: Single-stage volute casing pumps
principal dimensions and performance chart Areas of use: Water supply and industry. in space-saving close-coupled design.
according to DIN EN 733. Media: Pure, slightly polluted and aggressive Areas of use: Water supply and industry.
Areas of use: Water supply and industry. liquids with a viscosity of up to 150 mm2/s Media: Pure, slightly polluted and aggressive
Media: Pure, slightly polluted and aggressive without abrasive and solid components. liquids with a viscosity of up to 150 mm2/s
liquids with a viscosity of up to 150 mm /s 2
Special feature: Maintenance-friendly. without abrasive and solid components.
without abrasive and solid components. Removal of rotor unit with pump casing in situ. Special feature: Maintenance-friendly.
Special feature: Maintenance-friendly. Removal of rotor unit with pump casing in situ.
Removal of rotor unit with pump casing in situ. Materials: grey cast iron, bronze, ductile iron,
stainless steel Materials: grey cast iron, bronze, ductile iron,
Materials: grey cast iron, bronze, ductile iron, Shaft seal: gland packing, mechanical seal stainless steel
stainless steel Impeller design: radial impeller, semi-axial Shaft seal: mechanical seal
Shaft seal: gland packing, mechanical seal impeller Impeller design: radial impeller, vortex impeller
Impeller design: radial impeller, vortex impeller Types of installation: A, E, S, V, VD and double-channel impeller available in some
and double-channel impeller available in some cases
cases Types of installation: BS, B, S
Types of installation: A, E, B, S, V, VD, VDK
[US.gpm] 50 100 200 500 1000 3000 1000 2000 [US.gpm] 5000 10000 20000 5 10 [US.gpm] 50 100 200 500 1000 2000
[Imp.gpm] 50 100 200 500 1000 2000 1000 2000 [Imp.gpm] 5000 10000 5 10 [Imp.gpm] 50 100 200 500 1000 2000
140
100 400 100
300 300
100
200 200
50 [ft] 50
200
50
100 [ft] 100
20 20
100
[m] 50 50
40
20
10 10
30 [ft]
[m] 50 [m]
20 20
5 5
10
4 4
3 10 3 10
20
2 7 5 2 7
3 [m³/h] 10 20 50 100 200 500 800 200 [m³/h] 500 1000 2000 5000 1 [m³/h] 5 10 20 50 100 200 600
1 2 [l/s] 5 10 20 50 100 200 [l/s] 100 200 500 1000 [l/s] 1 2 5 10 20 50 100
15
ASC HP HP
Design: 07 | ASC Design: 55 Design: 45 | 46 | 49
Type: Single-stage, axial split volute casing Type: Multi-stage high-pressure pumps in Type: Multi-stage high-pressure pumps.
pumps. in-line design. Areas of use: Water supply, mining and industry.
Areas of use: Water supply. Areas of use: Water supply, mining and industry. Media: Clean and slightly polluted liquids with
Media: Pure, slightly polluted or aggressive Media: Pure and slightly polluted liquids. a viscosity of up to 150 mm2/s without abrasive
liquids with a viscosity of up to 150 mm /s 2
Special feature: With round flanges or oval and solid components.
without abrasive and solid components. flanges with internal thread.
Special feature: Casing in in-line design. With Materials* : grey cast iron, bronze, aluminium
horizontal installation, the motor can be placed Materials: grey cast iron, stainless steel bronze, stainless steel
on the left or right as desired. Shaft seal: mechanical seal Shaft seal: gland packing, mechanical seal
Impeller design: radial impeller Impeller design: radial impeller
Materials: grey cast iron, ductile iron, duplex Types of installation: S Types of installation*: A, AX, E, EX, S, V
stainless steel * depends on design
Shaft seal: gland packing, mechanical seal
Impeller design: double-flow radial impeller with
optimised suction characteristics and extraordinary
NPSH values
Types of installation: A, E, S
1000 [US.gpm] 3000 5000 10000 20000 5 10 [US.gpm] 50 100 300 30 [US.gpm] 100 200 500 1000 4000
1000 [Imp.gpm] 3000 5000 10000 5 10 [Imp.gpm] 50 100 200 20 [Imp.gpm] 100 200 500 1000 3000
200 400
500
500 1000
1000
200
100
300 500 200
500
200 100
100
50
[ft]
200
50 200
[ft]
30 100 50 [ft]
100
70 100
20
20 20
[m] 50
[m] 50 50
[m]
40
10 10 10
200 [m³/h] 500 1000 2000 3000 5000 1 [m³/h] 2 5 10 20 50 80 5 10 [m³/h] 50 100 200 500 1000
60 100 [l/s] 200 300 500 1000 [l/s] 1 2 5 10 20 2 [l/s] 5 10 20 50 100 200
16
SU SU SU
Design: 56 Design: 62 | U8 Design: 63 | 64 | 66
Type: Multi-stage, single-suction submersible Type: Multi-stage, single-suction submersible Type: Multi-stage, single-suction submersible
motor pumps with integrated check valve. motor pumps with integrated check valve. motor pumps.
Areas of use: Water supply, mining and industry. Areas of use: Water supply, mining and industry. Areas of use: Water supply, mining and industry.
Media: Pure, slightly polluted and aggressive Media: Pure, slightly polluted and abrasive Media: Pure, slightly polluted and abrasive
clean, service and cooling water. raw water, pure water, mineral water, seawater, raw water, pure water, mineral water, seawater,
service water, mine water and cooling water. service water, mine water and cooling water.
Materials: stainless steel
Shaft seal: mechanical seal Materials: grey cast iron, aluminium bronze Materials: grey cast iron, aluminium bronze
Impeller design: radial impeller, semi-axial Shaft seal: mechanical seal, shaft sealing ring Shaft seal: mechanical seal, shaft sealing ring
impeller Impeller design: semi-axial impeller Impeller design: semi-axial impeller
Types of installation: U (vertical, horizontal) Types of installation: U (vertical, horizontal) Types of installation: U (vertical, horizontal)
5 10 [US.gpm] 50 100 200 500 50 100 [US.gpm] 200 500 800 200 [US.gpm] 500 1000 2000
5 10 [Imp.gpm] 50 100 200 500 50 100 [Imp.gpm] 200 500 700 200 [Imp.gpm] 500 1000
700 800
500 2000
2000
500
1000 [ft] 500
[ft]
200
1000
[m] 500 300 1000
100
200
200
200 [m] 500
50 [m] 500
[ft]
100 100
100
300
20
50
200 200
10 50 50
1 2 [m³/h] 5 10 20 50 100 10 [m³/h] 20 50 100 200 50 [m³/h] 100 200 300 500
The solution.
MS-T – Modular Shaft Technology is not only a technological evolution, but also a revolu-
tion when it comes to costs.
MS-T is designed according to the modular principle – with all of its technical and
economic advantages.
That is why pumps with MS-T are the perfect solution wherever extremely high demands
are placed with regard to operational reliability, freedom from maintenance, service life,
efficiency and flexible heads. In all sectors of water supply, mining and industry.
HDM. Double-suction
submersible motor pumps
Maximum operational reliability.
Constant performance – error-free operation: An HDM invented by ANDRITZ Ritz guaran-
tees maximum operational reliability with no compromises.
HDM
Design: 61 | 67 | 68
4000
1000
3000
700
2000
500
[ft]
300 1000
200
[m] 500
100
100 200 [m³/h] 500 1000 2000
The solution.
HDM – Heavy Duty Mining. Two pumps are arranged on top of each other rotating in
opposite directions and driven by a continuous pump shaft.
The division of work between the two pumps provides complete compensation of axial
thrust, thus solving the problems of forces acting on the unit and of the load on the thrust
bearing. At the same time, the flow and suction velocity outside the pump is reduced by
50 %. This is more gentle on the well walls around the intake openings and minimises the
intake of abrasive substances.
The result.
Besides the technical advantages – complete compensation of axial thrust, 50 % lower
flow velocity and smaller-diameter impellers – HDM also provides economic benefits:
maximum operational reliability, minimum wear and extremely long service life, which
can quite often exceed 20 years. Paired with the ideal drive – the ANDRITZ Ritz high-
performance submersible motor – an unbeatable team!
Custom-tailored solutions.
Each ANDRITZ Ritz submersible motor pump with HDM technology is a custom-made
item. It is individually configured to suit your requirements.
SM SM
Low-voltage motor High-voltage motor
Type: Water-filled and cooled three-phase Type: Water-filled and cooled three-phase
asynchronous motor with squirrel-cage rotors. asynchronous motor with squirrel-cage rotors.
Areas of use: Water supply, mining and industry. Areas of use: Water supply, mining and industry.
Special feature: With rewindable winding. Special feature: With rewindable winding.
Materials: grey cast iron, bronze, stainless steel Materials: grey cast iron, bronze, stainless steel
Shaft seal: mechanical seal, shaft sealing ring Shaft seal: mechanical seal, shaft sealing ring
Types of installation: vertical, in some cases Types of installation: vertical, in some cases
horizontal horizontal
1000 5000
1000 5000
3000
500
500 3000
2000
300
300 2000
200
200 1000
[hp] 1000
100
100 [hp]
500
50 500
50 300
[kW]
300
200
20
20 [kW] 200
10 100
8 9 10 12 Zoll 14 16 16 19 22 Zoll 26 28 30 34
21
The solution.
MC-T – Modular Cooling Technology, an intelligent, compact cooling system that lays
all of these questions to rest. Here a pump impeller creates motion in the cooling circuit,
ensuring flow in the proper direction. Cooling channels developed in-house by us guar-
antee heat absorption from all of the thermal sources, ensure evacuation, and provide
optimal heat transmission via the outer wall of the motor to the medium being pumped.
The cooling performance can be dimensioned precisely through the use of additional
heat-exchanger modules.
SD SD SD SD
Design: 35 | AS Design: 38 Design: 39 Design: 15
Type: Single-stage channel impeller Type: Single-stage channel impeller Type: Single-stage channel impeller Type: Single-stage mixed flow
pumps. pumps. pumps. pumps.
Areas of use: Sewage and industry. Areas of use: Sewage and industry. Areas of use: Sewage and industry. Areas of use: Sewage and industry.
Media: Low/high viscosity and Media: Low/high viscosity and Media: Low/high viscosity and Media: Pure, slightly polluted
abrasive media and sludges with abrasive media and sludges with abrasive media, such as screened or heavily polluted liquids with
or without gas content. or without gas content as well as sewage, sludges without gas occasional solid debris.
Special feature: Maintenance- quench water. content, and quench water. Special feature: Maintenance-
friendly. Removal of rotor unit with Special feature: Maintenance- Special feature: Maintenance- friendly. Removal of rotor unit with
pump casing in situ. friendly. Removal of rotor unit with friendly. Removal of rotor unit with pump casing in situ.
pump casing in situ. pump casing in situ.
Material: grey cast iron Material: grey cast iron
Shaft seal: mechanical seal Material: grey cast iron, stainless Material: grey cast iron, ductile Shaft seal: gland packing,
Impeller design: single-channel steel iron mechanical seal
impeller, double-channel impeller, Shaft seal: gland packing, Shaft seal: gland packing, Impeller design: mixed flow
vortex impeller mechanical seal mechanical seal impeller
Types of installation: A, E, HZ, Impeller design: single-channel Impeller design: multi-channel Types of installation: A, E, HZ, H
SL, SG impeller, double-channel impeller, “T”-type impeller, double-channel with stub shaft, S, V
vortex impeller impeller
Types of installation: A, AL, E, H, Types of installation: A, E, H, HZ
HL, HZ, H with stub shaft, K, B, S,
SL, SG, V, VD
[US.gpm] 100 200 1000 2000 10000 [US.gpm] 100 200 1000 2000 10000 1000 2000 [US.gpm] 5000 10000 20000 5000 [US.gpm] 10000 15000 20000
[Imp.gpm] 100 200 1000 2000 9000 [Imp.gpm] 100 200 1000 2000 9000 1000 2000 [Imp.gpm] 5000 10000 5000 [Imp.gpm] 10000 15000
100 100 60 20
300 300
50
200 200 [m]
50 50
[ft] [ft]
100 10
100
100
20
20 20
20
[m] 50 [m] 50 5
[m] 50 [ft]
10
10 10
10
20
20 5
5 20 2
5
10 [ft]
10
2 7 4
2 7 10 [m³/h] 50 100 200 500 1000 2000 3 10 1
10 20 [m³/h] 50 100 200 500 1000 2000 200 [m³/h] 500 1000 2000 5000 1000 [m³/h] 2000 3000 5000
[l/s] 10 20 50 100 200 600
3 [l/s] 10 20 50 100 200 600 [l/s] 100 200 500 1000 [l/s] 400 800 1200
23
SD SW SW
Design: 35 | AS supplement Design: 22, 26 | AT, ATL Design: 59 | ETS, ETL
Type: Single-stage channel impeller pumps. Type: Single-stage submersible pumps Type: Single-stage submersible drainage pumps
Areas of use: Sewage and industry. in close-coupled design. in close-coupled design.
Media: Low/high viscosity and abrasive media Areas of use: Sewage and industry. Areas of use: Sewage and industry.
and sludges with or without gas content. Media: Sewage and waste water as well as Media: Pure to slightly polluted liquids without
Special feature: Maintenance-friendly. Removal sludges with a solids content of up to 10 %. coarse debris.
of rotor unit with pump casing in situ. Special feature: Pumps are also available in an Special feature: Available with float switch.
explosion-proof design.
Material: ductile iron Material: stainless steel, grey cast iron
Shaft seal: mechanical seal Material: grey cast iron, stainless steel Shaft seal: mechanical seal
Impeller design: multi-channel “T”-type impeller Shaft seal: mechanical seal Impeller design: vortex impeller
Types of installation: BS Impeller design: single-channel impeller, Types of installation: M
double-channel impeller, vortex impeller
Types of installation: N, M, TV, TH
2000 [US.gpm] 5000 10000 20000 40000 5 10 [US.gpm] 50 100 200 1000 2000 10000 [US.gpm] 10 20 50 100 200 400
2000 [Imp.gpm] 5000 10000 20000 30000 4 10 [Imp.gpm]50 100 200 1000 2000 10000 [Imp.gpm] 10 20 50 100 200
60 100 30
300 90
200
50
[ft] [m] 50
100
100
10
20
20
[m] 50 20
[m] 50
5
[ft]
10 10
10
20
20 5
2
5
[ft]
10
4
3 10 2 7 1
300 [m³/h] 1000 2000 5000 10000 1 [m³/h] 5 10 20 50 100 200 1000 3000 1 [m³/h] 5 10 20 50 100
100 [l/s] 200 500 1000 2000 [l/s] 1 2 5 10 20 50 100 800 0,3 [l/s] 1 2 5 10 20
24
Types of installation
Every ANDRITZ Ritz pump can be supplied for various types of in- on your specific application. The available types of installation are
stallation. The choice of the appropriate installation type depends shown in the corresponding line in the product descriptions.
A, AL, AX H, HL K SG
Pumps with bare shaft end. Pumps with V-belt drive. Motor Pumps with V-belt drive. Pumps for cardan shaft drive.
Installation: dry, horizontal. is mounted on bearing bracket. Motor is mounted alongside Installation: dry, vertical.
Installation: dry, horizontal. pump on slide rails.
Installation: dry, horizontal.
BS HZ B SL
Pumps with directly coupled Pumps with V-belt drive. Motor Pumps with directly coupled Pumps with flexibly coupled motor.
special motor (close-coupled is mounted on a support frame. standard IEC motor Installation: dry, vertical.
design). Installation: dry, horizontal. (close-coupled design).
Installation: dry, horizontal or Installation: dry, horizontal.
vertical.
N U
Pumps with directly coupled Pumps with directly coupled
submersible motor. submersible motor.
Installation: wet, vertical, Installation: wet, vertical or
stationary. horizontal, optionally in pipe
shroud for dry installation.
TH V VD VDK
Pumps with directly coupled Pumps with drive via supporting Pumps with drive via supporting Pumps with drive via extended
submersible motor. tube system. Motor is fastened tube system. Larger base plate pump shaft. Optionally with larger
Installation: dry, horizontal. above floor level on a motor stool. with lateral delivery pipe. Motor base plate and lateral delivery
Installation: dry or wet, vertical. is fastened above floor level on a pipe. Motor is fastened above floor
motor stool. level on a motor stool.
Installation: dry or wet, vertical. Installation: wet, vertical.
TV
Pumps with directly coupled
submersible motor.
Installation: dry, vertical.
26
WinPump
For selecting and dimensioning
W inPump
is the original! ANDRITZ Ritz was the first to launch a software
for pump selection and configuration. You, too can benefit from our edge in
know-how: With WinPump!
Our
complete product range! It’s all in there – everything from standard pumps,
high-pressure pumps and submersible motor pumps to sewage pumps.
For
all areas of expertise! Impressive results in the fields of water, mining,
industry and sewage.
Hydraulic
selection! Your customised solution is only a few clicks away.
An
extensive range of functions and highly-detailed adaptation to the operating
conditions.
Simple
configuration and user-friendly operation! With WinPump you can work
faster, more independently and more professionally.
System requirements
When ordering by fax, simply copy the form below and check the boxes for the information
you require.
Company
Branch of industry
Department
Street | No.
All data, information, statements, photographs and graphic illustrations made in this leaflet are without any obligation and raise no liabilities to or form part of any sales contracts of
Andritz AG or any affiliates for equipment and/or systems referred to herein. © Andritz AG 2011. All rights reserved. No part of this copyrighted work may be reproduced, modified or
distributed in any form or by any means, or stored in any database or retrieval system, without the prior written permission of Andritz AG or its affiliates. Any such unauthorized use for
any purpose is a violation of the relevant copyright laws. Andritz AG, Stattegger Strasse 18, 8045 Graz, Austria. 4026933 | 12.11