You are on page 1of 10

Page 1265

Drive Belt: Testing and Inspection AP13.22-P-1352Z Check Visible Area Of Poly-V Belt For Wear

AP13.22-P-1352Z Check Visible Area Of Poly-V Belt For Wear

Component Identification

Component Identification
Page 8843
6 Remove panelling (6) and pull out cable (7) from panelling (6).
7 Unhook cover (8) all around (arrows).

8 Pull out additional length of fabric clamped into groove (arrows).

9 Unhook transverse clamping bracket (9) at the top and remove (arrows).
Page 667

In Case of Warranty, use the table.


Page 5794

Steering Angle Sensor: Removal and Replacement

Removing And Installing Steering Angle Sensor

1 Remove steering wheel

2 Remove contact spiral (A45) together with the steering angle sensor (N49)

3 Press steering angle sensor (N49) off contact spiral (A45)

NOTE: The steering angle sensor is clipped onto the rear of the contact spiral.

4 Install in the reverse order

5 Activate steering angle sensor -

Vehicles with ADS or ESP


Page 3364
Spark Plug: Service and Repair
Work instructions
ABS/TCS - ESP Lamp ON/Code C1142 Set

You might also like