Professional Documents
Culture Documents
Srijan Sengupta
Assistant Professor, Department of Metallurgical & Materials Engineering, Indian
Institute of Technology Jodhpur, India
Email: srijansengupta@iitj.ac.in
ph: 8420424711
Temporary Address: Indian Institute of Technology Jodhpur, NH 62, Surpura Bypass
Rd, Karwar, Rajasthan 342030
Permanent Address: FD 425, Salt Lake, Sector 3, Kolkata 700106
ACADEMIC QUALIFICATION
WORK EXPERIENCES
xxxvii
DISSERTATIONS/ PROJECTS
INTERNSHIP
Tata Steel Ltd, Jamshedpur [May’09-July ’09]
Worked on the project entitled “Effect of Microstructure and Mechanical
Properties of Hot-Rolled
High-Strength Steel on Hole Expansion Ratio” under Mr. G. Jha
INVITED TALK
Delivered a talk on “Bridging the gap between Science, Art and Technology” at
Manipal Center for Philosophy and Humanities [14 May, 2018]
xxxviii
PATENT FILED
Indian Patent Application No.: 0613/KOL/2014 dated 05 June 2014
in the name of INDIAN INSTITUTE OF TECHNOLOGY
Entitle POROUS NANOSTRUCTURED TIN-ANTIMONY-COPPER BASED
ALLOY ELECTRODES AS ANODE MATERIAL FOR LITHIUM ION
BATTERIES AND METHODS THEREOF
Your Ref: IIT/SRIC/IPR/2014
Our Ref: PCC11523/ch
PUBLICATIONS
Srijan Sengupta, Arijit Mitra, Prem P. Dahiya, Abhinav Kumar, Manila Mallik,
Karabi Das, S.B. Majumder, Siddhartha Das*, Investigation on Li conversion
behaviour and degradation mechanisms in Tin based ternary component alloy anodes
for Li ion batteries, J. Alloys Compd., 721 (2017) 236-248
Srijan Sengupta, Arghya Patra, Mainul Akhtar, Karabi Das, Subhasish Basu
Majumder, Siddhartha Das*, 3D microporous Sn-Sb-Ni alloy impregnated Ni foam
as high-performance negative electrode for Li-ion batteries, J. Alloys Compd., 705
(2017) 290-300
Srijan Sengupta, Arghya Patra, Yash Deo, Karabi Das, Subhasish Basu Majumder,
and Siddhartha Das, A Novel Multiphase Sn-Sb-Cu Alloy Electrodeposited on 3D
Interconnected Microporous Cu Current Collector as Negative Electrode for Li Ion
Battery, Metall Mater Trans E 4:51–59
Srijan Sengupta, Arghya Patra, Sambedan Jena, Karabi Das, and Siddhartha Das*,
A Study on the Effect of Electrodeposition Parameters on the Morphology of
Porous Nickel Electrodeposits, Metall and Mat Trans A (2018).
Srijan Sengupta, Arghya Patra, Arijit Mitra, Sambedan Jena, Karabi Das, S.B.
Majumder, Siddhartha Das*, Melt impregnation as a post processing treatment for
performance enhancement in high capacity 3D microporous Tin-Copper-Nickel
intermetallic anode for Li-ion battery supported by electrodeposited Nickel scaffold:
A Structural study, February 2018 Applied Surface Science 441
Rajib Chakraborty, Srijan Sengupta, Karabi Das, Siddhartha Das, Partha Saha,
"Synthesis and characterization of MWCNT reinforced nano-crystalline Cu coating
from a highly basic bath through pulse electrodeposition", Surfaces and Interfaces 9
(2017) 28–35
Rajib Chakraborty, Srijan Sengupta, Partha Saha, Karabi Das, Siddhartha Das,
Synthesis of calcium hydrogen phosphate and hydroxyapatite coating on SS316
substrate through pulsed electrodeposition, Materials Science and Engineering C 69
(2016) 875–883
xxxix
Swastika Banthia, Srijan Sengupta, Manila Mallik, Siddhartha Das and KarabiDas*,
Substrate effect on electrodeposited Cu morphology and crystal shapes, Surface
Engineering, 2017
Swatika Banthia, Srijan Sengupta, Siddhartha Das, Karabi Das*, Synthesis and
characterization of novel Cu, Cu-SiC functionally graded coating by pulse reverse
electrodeposition, October 2018 Applied Surface Science
Manila Mallik, Arijit Mitra, Srijan Sengupta, Karabi Das, Rabindra N. Ghosh, and
Siddhartha Das*, “Effect of Current Density on the Nucleation and Growth of Crystal
Facets during Pulse Electrodeposition of Sn–Cu Lead-Free Solder”, Cryst. Growth
Des., 2014, 14 (12), pp 6542–6549
Arijit Mitra, Manila Mallik, Srijan Sengupta, Swastika Banthia, Karabi Das, and
Siddhartha Das, "Effect of Anodic Passivation at High Applied Potential Difference on
the Crystal Shape and Morphology of Cu Electrodeposits: Thermodynamics and
Kinetics of Electrocrystallization", Cryst. Growth Des., 2017, 17 (4), pp 1539–1549
P.R. Dheeraj, Arghya Patra, Srijan Sengupta, Siddhartha Das, Karabi Das*,
Synergistic effect of peak current density and nature of surfactant on microstructure,
mechanical and electrochemical properties of pulsed electrodeposited Ni-Co-SiC
nanocomposites, Journal of Alloys and Compounds 729 (2017) 1093-1107
Rajib Chakraborty, *, V.S. Seesala, Srijan Sengupta, Santanu Dhara, Partha Saha,
Karabi Das, Siddhartha Das, Comparison of Osteoconduction, cytocompatibility and
corrosion protection performance of hydroxyapatite-calcium hydrogen phosphate
composite coating synthesized in-situ through pulsed electro-deposition with varying
amount of phase and crystallinity, Surfaces and Interfaces 10 (2018) 1-10.
Saptarshi Das, Swastika Banthia, Arghya Patra, Srijan Sengupta*, Shiv Brat Singh,
Novel bilayer Zn-Ni/Ni-Co-SiC nanocomposite coating with exceptional corrosion and
wear properties by pulse electrodeposition, Volume 738, 25 March 2018, Pages 394-
404
Sambedan Jena, Arijit Mitra, Arghya Patra, Srijan Sengupta, Manila Mallik, Karabi
Das, S.B. Majumder, Siddhartha Das*, Sandwich architecture of Sn-SnSb alloy
nanoparticles and N-doped reduced graphene oxide sheets as a high rate capability
anode for lithium-ion batteries, August 2018 Journal of Power Sources 401:165
xlii
CONFERRENCE PRESENTATIONS
Srijan Sengupta, Arijit Mitra, Prem P. Dahiya, Abhinav Kumar, Manila Mallik,Karabi Das,
S.B. Majumder, Siddhartha Das “Electrodeposited Sn-Sb-Cu Alloy Negative Electrode for Li
Ion Batteries”at TMS 2016 145th ANNUAL MEETING & EXHIBITION, February 14 – 18,
Nashville, Tennessee, USA
Swastika Banthia, Srijan Sengupta, Karabi Das, and Siddhartha Das, “Synthesis of
Functionally Graded (Cu, Cu-SiC) Nanocomposite Coating on Cu Substrate by Pulse
Electrodeposition”at TMS 2016 145th ANNUAL MEETING & EXHIBITION, February 14
– 18, Nashville, Tennessee, USA
Srijan Sengupta, Arghya Patra, Mainul Akhtar, Karabi Das, Subhasish Basu Majumder,
Siddhartha Das “Novel Three-Dimensional Porous Sn-Sb-Ni Anode on Ni Foam:
Electrodeposition Synthesis and Li Storage Performance” accepted at TMS 2017 146th
ANNUAL MEETING AND EXHIBITION, February 26 – March 2, 2017, San Diego,
California, USA
Arghya Patra, Srijan Sengupta, Karabi Das, Siddhartha Das Paper titled “Highly Porous
Interconnected Carbon Nanosheets Derived from Jute Fibers for Supercapacitors and Li-ion
Batteries” accepted at TMS 2017 146th ANNUAL MEETING AND EXHIBITION, February
26 – March 2, 2017, San Diego, California, USA
GRANTS RECEIVED
IIT Kharagpur student grant for best conference (fully funded): TMS 2016 145 th
ANNUAL MEETING & EXHIBITION, February 14 – 18, Nashville, Tennessee, USA
IIT Kharagpur student grant for best conference (fully funded): 2017 146th ANNUAL
MEETING AND EXHIBITION, February 26 – March 2, 2017, San Diego, California, USA
AWARDS
Best presentation award: Research Scholar day, Dept. of Metallurgical and Materials
Engg., IIT Kharagpur, 2016
POSITIONS OF RESPONSIBILITY
Teaching Assistantships
Assisted in preparing Assignments and evaluating students
Materials Characterization (Prof. S. Das, IIT Kgp) [July 2014-present]
Ceramic processing technology (Prof. P. Bhargav, IITB) [Jan 2012-July 2012]
xli
Phase Transformations (Prof. N. Prabhu, IITB) [July 2012-July 2013]
INSTRUMENT HANDLED
LANGUAGES KNOWN
xlii