Professional Documents
Culture Documents
PURPOSE
The JUS Pulling tool is used to employ external fishnecks on subsurface
devices inside the wellbore. These pulling tools have cores of medium
lengths. Most of these cores are threaded in order to receive probes, prongs or
shanks.
ASSEMBLY PARTS
1. Fishneck
2. Core
Spring
3. Skirt
4. Dog Spring
5. Dog
6. Pawls
7. S Core
8. Shear Pin Sub*
9. Shear Pin Cover*
OPERATION
Used when there is a need to jar down to shear off of a subsurface tool
and/or fish when a jar up tool is not desired.
The core may be easily changed in the field to allow for a deeper or
shallower reach depending on application.
The JUS Pulling Tool is able to be turned into a JDC by simply changing
the fishneck and adding a core cap.
PRECAUTIONS
Ensure the proper core is installed so as the tool can properly be sheared. The
improper core may result in the inability to release the subsurface tool
and/or fish.
Care should be taken to inspect the dogs, the skirt, and the fishneck for damage
such as metal fatigue, cracking, or metal deformity.
61 When ordering please specify part name and size. Call us Toll Free: 1-800-438-0061
CANADA • USA • INTERNATIONAL • www.bracetool.com
JUS Pulling Tool
62 When ordering please specify part name and size. Call us Toll Free: 1-800-438-0061
CANADA • USA • INTERNATIONAL • www.bracetool.com