Professional Documents
Culture Documents
Contents Page
Han
01
·
1
Han® 3 A / Han® 4 A
Features Derating
Han A • Innovative Han-Quick Lock® termination with reduced wiring Current carrying capacity
times The current carrying capacity of the connectors is limited by the
• No special tools required thermal load capability of the contact element material including
• Suitable for all metal and plastic hoods and housings of the the connections and the insulating parts. The derating curve
series Han® 3 A is therefore valid for currents which flow constantly (non-inter-
mittent) through each contact element of the connector evenly,
• for currents up to 10 A without exceeding the allowed maximum temperature.
Measuring and testing techniques acc. to IEC 60512-5-2
Technical characteristics
Number of contacts 3, 4
Rated current 10 A
Han
01
·
2
Han® 3 A Size 3 A
Number of contacts
3+
10 A 230/400 V 4 kV 3
Han A
10 A 250 V 4 kV 3
Conductor
cross-section Part number Drawing
Identification (mm²) Male Female (dimensions in mm)
Blue slide
Black slide
Han
01
·
3
Han® 4 A Size 3 A
Number of contacts
Han A 4+
10 A 230/400 V 4 kV 3
10 A 250 V 4 kV 3
Conductor
cross-section Part number Drawing
Identification (mm²) Male Female (dimensions in mm)
Blue slide
Contact arrangement (view from termination
side)
Black slide
Han
01
·
4
Han® 10 A / Han® 16 A / Han® 32 A
Features Derating
• Small size Han A
• Available with crimp and screw termination
• Screw termination also available with wire protection
Han
01
·
5
Han® 10 A Size 10 A
Number of contacts
Han A 10+
16 A 250 V 4 kV 3
Conductor
cross-section Part number Drawing
Identification (mm²) Male Female (dimensions in mm)
Number of contacts
16+
16 A 250 V 4 kV 3
Han A
Conductor
cross-section Part number Drawing
Identification (mm²) Male Female (dimensions in mm)
Number of contacts
Han A 32+
16 A 250 V 4 kV 3
Conductor
cross-section Part number Drawing
Identification (mm²) Male Female (dimensions in mm)
Han
01
·
8
Han® 32 A Size 32 A
Number of contacts
32+
16 A 250 V 4 kV 3
Han A
Conductor
cross-section Part number Drawing
Identification (mm²) Male Female (dimensions in mm)
You need two inserts for a com- Contact arrangement (view from termination
plete assembly! side)
Han
01
·
9
Han® 32 A Size 32 A
Number of contacts
Han A 32+
16 A 250 V 4 kV 3
Conductor
cross-section Part number Drawing
Identification (mm²) Male Female (dimensions in mm)
You need two inserts for a com- 1) Distance for contact max. 24 mm
plete assembly! Stripping length 7.5 mm
Tightening torque 0.5 Nm
Han
01
·
10
Contacts
Han A
Conductor
cross-section Part number Drawing
Identification (mm²) Male Female (dimensions in mm)
Han A
Han
01
· Wind turbine by ENERCON with Han® 3 A – for a fast and reliable installation.
12