Professional Documents
Culture Documents
Professional Features
获知产品的基本参数请阅读此章节
Product Appearance Indicator Light and Sound Indication
Communication:TCP/IP Authentication Mode: Fingerprint/Card( ID or IC) / Take ASF-DF40 as an example:
Communication Rate:10M/100M Password
Indicator light Indicator light
Reader Interface:1
User Capacity: Fingerprint3000
Input Protection:TVS lightening protection,PTC
Record Capacity:50000 Red light indicates that the
surge protection The green light indicates that Blue light indicates device is
Alarm Record Capacity:20000 device is working properly. can access and fingerprint programming status. Continuous
Output Protection:Varistor Protection Red blinking indicates in registered successfully. blinking indicates entering the
Exit Button:1
Working Voltage:DC12V registration status, waiting programming status. Blue light
Door-Magnet:1 Indicator light for the fingerprint to be blinking once means that the
Working Current:Non-load<1A registered. fingerprint registration is done.
Size(mm):ASF-DF20 L122×W77×H45
ASF-DF30 L179×W76×H36
ASF-DF40 L179×W76×H36
Front One sound 3 Three sounds ~~ The continuous
means that can indicate that no long beep
Fingerprint window
Advanced Features Limit Valid Date To set user valid date,user will limit to access after valid date,it can be accurate to the hour.
Fingerprint window Fingerprint
window
access access. indicates that the
device has been
removed.
Global Anti-passback User can set all devices that managed by software as global anti-passback group by software.
Middle frame
Take ASF-DF20 as an example: Reader Exit Button,Door-Magnet and Alarm Input
①Put the positioning ①Put the positioning
Wa ll Fron Wa ll paper on the wall, follow
paper on the wall, follow
t Co
the icon to punch and ver the icon to punch and
pass the cable out. pass the cable out.
NC
Device COM
Bac
k Co
ver
P o s it
io n in
P o s it
io n in NO
For More Infor mation
Pape g Pape g
r r COM
ASR-RM40
Back Cover NC
Device Device
NO
COM
IR Alarm
NC
②Fix back cover with (NO\NC)
self-tapping screws, place ②Fix back cover with
the device into the middle self-tapping screws, place
frame, then connect device the device into the middle
by the cable. frame, then connect device
by the cable. Lock Alarm Output
Communication
④Rotate the bottom of the ④Rotate the bottom of the Safesmar t Business
middle frame inward, until f ront cover inward, until
Power
fully buttoned into the bottom
software NO
fully buttoned into the bottom
Bell
cover. Wall cover. Wall Attendance for Office COM
Safe for Office V+
⑤Tighten the screw from the bottom to make ⑤Tighten the screw from the bottom to make
the middle frame fixed with the bottom cover. the f ront cover fixed with the bottom cover. E-mail Push Power Supply V-
Alarm Push
Device Tel:+86-755-89959665/89745595
Staff Care Device Device