Professional Documents
Culture Documents
NON-ISOLATED SERIES
Powering Communications and Technology
DESCRIPTION
SIP/SIE non-isolated step-down DC/DC converters
deliver high efficiency and excellent transient response in
an industry standard SIP package. The SIP/SIE series
has output voltages ranging from 1.2 to 3.3V and up to 6
amps of output current. The SIE model has power OK
and remote sense pins for added flexibility and improved
point of load regulation. The SIP/SIE series is available
for vertical or horizontal mounting. The SIP/SIE series
use 100% surface-mount construction for maximum
reliability and feature over seven million hours MTBF.
FEATURES
• Non-Isolated • Surface-Mount
• High Efficiency Construction
Topology • Voltage Trim
• Excellent Transient • Vertical or Horizontal
Response Mounting
TECHNICAL SPECIFICATIONS • Sense and Power OK • Water Washable
(SIE Model Only)
Input
Voltage Range
5 VDC Nominal 4.5 - 5.5 VDC
Efficiency vs. Load
90
Output
Setpoint Accuracy ±1% 88
Line Regulation Vin Min. - Vin Max., Iout Rated 1% Vout
86
Load Regulation Iout Min.- Iout Max., Vin Nom. 1% Vout
EFFICIENCY %
General Notes
Remote Shutdown Negative Logic † MTBF predictions may vary slightly from model to model.
Switching Frequency 350 KHz
Temperature Coefficient 0.03% /°C
Specifications typically at 25°C, normal line, and full load, unless
Ambient Operating Temperature 0 to +55°C
otherwise stated.
Minimum Required Airflow 200 LFM
Storage Range -25 to +120°C
Soldering Conditions: I/O pins, 260°C, ten seconds; fully
Humidity Max., Non-Condensing 95%
compatible with commercial wave-soldering equipment.
Vibration, 3 Axes, 5 Min Each 5 g, 10 - 55 Hz
MTBF† (Bellcore TR-NWT-000332) 7.1 x 106 hrs Safety: Agency approvals may vary from model to model. Please
Safety UL, cUL, TUV consult factory for specific model information.
Weight (approx.) 0.25 oz
Units are water-washable and fully compatible with commercial
spray or immersion post wave-solder washing equipment.
1
Rev. April 5, 2001
SIP/SIE 500
Powering Communications and Technology
NON-ISOLATED SERIES
* Maximum input current at minimum input voltage, maximum rated output power.
** At nominal Vin, rated output.
NOTE: For Right Angle Pins, Add suffix "R" to model number.
MECHANICAL DRAWING
SIP MODEL SIE MODEL
0.55 0.55
(14.0) (14.0)
1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11
0.13 (3.30) 0.13 (3.30)
0.100 TYP. 0.025 SQ. 0.10 TYP. 0.025 SQ.
(2.54) (0.64) 0.11 (2.54) (0.64) 0.11
0.28 1.90 0.28 1.90 (2.80)
(2.80) 0.25 (48.26)
0.25
(7.10) (48.26) (7.10) (6.40)
(6.40) 2.50
2.50 (63.5)
(63.5)
0.025 SQ.
0.025 SQ. (0.64)
2
This datasheet has been download from:
www.datasheetcatalog.com