Professional Documents
Culture Documents
AHM 565
Airbus 319-112
D-ASPA
D-ASPB
D-APTA
REVISION NUMBER 6
AHM 565 (continued)
EDP-SYSTEM
SEMI-PERMANENT DATA
Contact and Message Information A
Supplier Contacts Sheet 1
Carrier
PTI
Completed sheets and changes of basic data and procedures must be forwarded to:
PrivatAir GmbH
c/o Ground Operations Department
Peter-Müller-Str. 26
40468 Düsseldorf
GERMANY
Facsimile (Fax) Nr: +49 (0)211 54230 351
Privatair
Ch. Des Papillons 18 P.O.Box 572
1215 Geneva 15, Switzerland
TELETYPE ADDRESS:
E-MAIL ADDRESS:
E-Document
Other (Specify)
REMARKS:
Completed by: Issue No.: 1
(Signature) Date: 2016-02-15
AHM 565 (continued)
EDP-SYSTEM
SEMI-PERMANENT DATA
Contact and Message Information A
Carrier Contacts Sheet 2
Carrier
PTI
2. CARRIER’S CONTACT ADDRESS
Completed sheets and changes of basic data and procedures must be forwarded to:
PrivatAir GmbH
Peter-Müller-Str. 26
40468 Düsseldorf
GERMANY
Privatair
Ch. Des Papillons 18 P.O.Box 572
1215 Geneva 15, Switzerland
TELETYPE ADDRESS:
E-MAIL ADDRESS:
E-Document
Other (Specify)
REMARKS:
Carrier
PTI
3. LIST OF REVISIONS
The issue number and date are mandatory.
Carrier
PTI
4. LIST OF EFFECTIVE SHEETS
Carrier
PTI
10.1 1 2016-02-15
10.2 1 2016-02-15
11.1 1 2016-02-15
11.2 1 2016-02-15
E 1 2 2016-03-03
2.1 3 2016-04-11
2.2 3 2016-04-11
3 2 2016-03-22
4 1 2016-02-15
5 3 2016-04-11
F 1.1 1 2016-02-15
G 1 1 2016-02-15
H 1 1 2016-02-15
2 1 2016-02-15
3 1 2016-02-15
Carrier
PTI
AUTOMATICALLY PRODUCED DOCUMENTS
(tick as required)
□LOADSHEET
LOADING INSTRUCTION/REPORT
□NOTOC
PASSENGER INFO LIST
SEATPLAN
6. MESSAGE REQUIREMENTS
(tick as required)
Attach a complete address list for all messages mentioned under paragraph 4 above.
In the event of the requirements to produce multiple copies of the same sheets (e.g. C5, C9)
establish an additional sequence identifier while keeping the original sheet number.
E.g. : C5a, C5b, etc. or C5.1, C5.2, etc.
Carrier
PTI
1. STANDARD UNITS AND CODES
1.1 Weight
Unit Measurement
Weight: Kilogram Pound
Volume: Cubic Metre Cubic Feet
The following class naming convention shall be used throughout the document.
Class description: (e.g. F, Y, C, M etc.)
Carrier
PTI
2. CREW AND CREW BAGGAGE WEIGHTS
Remarks:
Remarks:
Carrier
PTI
3. PASSENGER AND BAGGAGE WEIGHTS
Yes No
Hand baggage weight is included in the above mentioned passenger weights.
If No: Actual cabin baggage weight must be used.
Remarks:
Carrier
PTI
3. PASSENGER AND BAGGAGE WEIGHTS
Remarks:
Remarks:
EDP-SYSTEM
SEMI-PERMANENT DATA
Standards B
ULD Specifications Sheet 5
Carrier
PTI
4. UNIT LOAD DEVICES (ULD)
*Designate as the default for ULD type weight and volume. To be used during load planning.
A319-112 PTI
1. AIRCRAFT TYPE OR FLEET
Series or subtype:
Unit Measurement
Remarks:
A319-112 PTI
2. BALANCE AND SPECIAL INFORMATION - OUTPUT ON LOADSHEET
Prelim Final
Item EDP ACARS EDP ACARS Remarks
AHM 517 AHM 518 AHM 517 AHM 518
Basic Index BI
Dry Operating Index DOI
Deadload Index DLI
Deadload MAC MACDLW
Loaded Index at zero fuel weight LIZFW
Loaded Index at take-off weight LITOW
Loaded Index at landing weight LILAW
RC - at zero fuel weight RCZFW
RC - at take-off weight RCTOW
RC - at landing weight RCLAW
Stabilizer trim setting at take-off STABTO*
A319-112 PTI
2.3 Supplementary Information
Prelim Final
Item EDP ACARS EDP ACARS Remarks
AHM 517 AHM 518 AHM 517 AHM 518
Ballast Fuel
Basic Index
Basic Weight
Center of Gravity Limits – LAW
Center of Gravity Limits – TOW
Center of Gravity Limits – ZFW
Crew Code
Crew Index
Deadload Breakdown
Fuel Density
LDM
Pantry Code
Pantry Index
Service Weight Adjustments
Transit
Transit Zero Fuel Centre of Gravity
Transit Zero Fuel Weight
Trapped Fuel
A319-112 PTI
3 BASIC INDEX AND MAC/RC FORMULA
W Sta. Ref.Sta.
Index K
C
C (I K)
Ref.Sta. LEMAC
%MAC/RC W
MAC or RC
100
W = Weight, actual
Sta. = Station, horizontal distance in from station zero to location.
Ref. Sta. = Reference station/axis. Selected station around which all index values are
calculated.
A319-112 PTI
3.4 CG – Limits for LoadSheet
Purposes
Purposes
Enter the forward and the aft balance limits in the boxes, commencing at the lowest possible operating
weight and terminating at the highest possible operating weight to be checked.
FORWARD AFT
Special condition if applicable Special condition if applicable
Specify Specify
(1) Weight %MAC / index (1) Weight %MAC / index
applicability applicability
Zero fuel 35400 17.66 / 39.11 Zero fuel 35400 36.53 / 67.12
Zero fuel 40153 16.99 / 36.52 Zero fuel 58500 37.50 / 80.68
Zero fuel 49722 16.42 / 32.11
Zero fuel 50184 16.48 / 32.07 Takeoff 35400 28.53 / 55.25
Zero fuel 50646 16.86 / 32.71 Takeoff 49600 37.24 / 75.47
Zero fuel 51108 22.54 / 44.74 Takeoff 65300 37.66 / 84.68
Zero fuel 51570 22.72 / 45.07 Takeoff 75500 34.84 / 81.17
Zero fuel 52032 22.84 / 45.29
Zero fuel 52494 22.90 / 45.39 Landing 35400 36.55 / 67.15
Zero fuel 52956 22.92 / 45.38 Landing 62500 37.61 / 83.07
Zero fuel 53418 22.88 / 45.26
Zero fuel 53880 22.80 / 45.04
Zero fuel 55523 22.39 / 43.92
Zero fuel 58235 22.23 / 43.24
Zero fuel 58500 22.39 / 43.60
A319-112 PTI
4.2 Curtailments
Remarks:
A319-112 PTI
4.3 Ideal Trim Line
Table Name:
Condition (specify):
Weight Index
Remarks:
A319-112 PTI
4.4 Tipping Limits
Table Name:
Wind speed:
Weight %MAC
Remarks:
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 8.1
A319-112 PTI
5. FUEL
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 8.2
A319-112 PTI
5.1 Effect of Fuel – Cumulative
Procedure name: Refueling procedure
Procedure Type: Standard Procedure: Non-standard Procedure:
Max Volume:
Fuel Density: 0.78 Valid Density Range: to
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 8.3
A319-112 PTI
5.1 Effect of Fuel – Cumulative
Procedure name: Refueling procedure
Procedure Type: Standard Procedure: Non-standard Procedure:
Max Volume:
Fuel Density: 0.79 Valid Density Range: to
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 8.4
A319-112 PTI
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 8.5
A319-112 PTI
Effect of Fuel – Cumulative
Procedure name: Refueling procedure
Procedure Type: Standard Procedure: Non-standard Procedure:
Max Volume:
Fuel Density: 0.81 Valid Density Range: to
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 8.6
A319-112 PTI
Effect of Fuel – Cumulative
Procedure name: Refueling procedure
Procedure Type: Standard Procedure: Non-standard Procedure:
Max Volume:
Fuel Density: 0.82 Valid Density Range: to
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 8.8
A319-112 PTI
Effect of Fuel – Cumulative
Procedure name: Refueling procedure
Procedure Type: Standard Procedure: Non-standard Procedure:
Max Volume:
Fuel Density: 0.83 Valid Density Range: to
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 8.8
A319-112 PTI
Effect of Fuel – Cumulative
Procedure name: Refueling procedure
Procedure Type: Standard Procedure: Non-standard Procedure:
Max Volume:
Fuel Density: 0.84 Valid Density Range: to
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 8.9
A319-112 PTI
Effect of Fuel – Cumulative
Procedure name: Refueling procedure
Procedure Type: Standard Procedure: Non-standard Procedure:
Max Volume:
Fuel Density: 0.85 Valid Density Range: to
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 10.1
A319-112 PTI
*Indicate tanks from which taxi fuel is burned considering all fuel loading conditions.
Remarks:
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 10.2
A319-112 PTI
3.14 Fuel distribution
If individual tanks used, supply fueling sequence.
*Indicate tanks from which taxi fuel is burned considering all fuel loading conditions.
Remarks:
EDP-SYSTEM
SEMI-PERMANENT DATA
Aircraft Information C
Fuel Sheet 10.3
A319-112 PTI
3.16 Fuel distribution
If individual tanks used, supply fueling sequence.
*Indicate tanks from which taxi fuel is burned considering all fuel loading conditions.
Remarks:
A319-112 PTI
6. Stabilizer trim setting
6.1 Settings
For each required Thrust rating and/or Flap setting, or range of ratings/settings, supply the following
data.
If required, specify ANU (A/C nose up) and AND (A/C nose down)
Enter the %MAC values used and for each weight the corresponding stabilizer trim settings.
A319-112 PTI
1. DIMENSIONS AND LIMITS
Maximum H-arm
Deck Volume
Weight From To
Upper deck
Main deck
Lower deck 6786 9.763 27.270
Remarks:
A319-112 PTI
2. HOLDS AND CABINS
Applicability:
A319-112 PTI
3 ULD CONFIGURATION
Applicability:
Index
Y-arm H-arm
Individual Influence
Bay/ Group MAX
ULD per Color**
Position ID* Weight
requirements Centroid From To Centroid FWD AFT Weight
unit
* Group ID used to identify ULD positions that are part of a string/stack. If the string/stack has it weight
limitation then this has to be identified on a separate line by using the group ID as position name.
A319-112 PTI
3 ULD CONFIGURATION
Applicability:
Index
Individual Y-arm H-arm
Bay/ Group MAX Influence
ULD Color**
Position ID* Weight per Weight
requirements Centroid From To Centroid FWD AFT
unit
* Group ID used to identify ULD positions that are part of a string/stack. If the string/stack has it weight
limitation then this has to be identified on a separate line by using the group ID as position name.
A319-112 PTI
6.1 Doors
Remark: For each door, the height written in the table is the lowest height available.
A319-112 PTI
5 CABIN AND EQUIPMENT
(Cabin crew / Class / Galleys / Lavs / DIP Lockers)
A319-112 PTI
5.4 Potable Water Locations
G1 -0.01110
G5 +0.01219
A319-112 PTI
8.1 Seating Layout
First letter indicates class (e.g. F, C, Y)
Show the passenger seating layout for the configurations given in the box at the top by inserting the
seat row numbers and letters in the following table. For special seats use the description codes listed
below.
A = Aisle N = No smoking
B = Bassinet position O = Over wing seat
C = Crew seat P = Stretcher location
E = Emergency exit Q = Quiet zone
F = Bulkhead seat S = Smoking
G = Groups T = Near toilet
H = Incapacitated passenger U = Unaccompanied minor
I = Infant preference row/seats V = Seat left vacant / offered last
J = Rear facing seats W = No movie
K = Near galley X = Not available
L = Leg space seat Y = Not fitted
M = Wheel chair Z = Buffer zone
EDP-SYSTEM
SEMI-PERMANENT DATA
Configuration Information D
Seat Plan Layout Sheet 8
A319-112 PTI
8.2.1 Seat Plan
Valid for D-APTA
Index
influence
Max Max
Section Row Seat Identifier H-arm per
Weight* Seats
Weight
Unit
OA 1 XB X X XB -0.00790
2 X X X X -0.00620
3 X X X X -0.00465
4 X X X X -0.00346
5 XO XO XO XO -0.00219
OB 6 XO XO XO XO -0.00033
7 X X X X +0.00089
8 X X X X +0.00208
9 X X X X +0.00317
10 X X X X +0.00437
OC 11 X X X X +0.00556
12 X X X X +0.00675
14 X X X X +0.00787
15 X X X X +0.00906
*Total weight allowed for seats listed on row. Used for SOC.
A319-112 PTI
6.3 Saleable Configurations
Repeat 6.3 for each saleable configuration.
Saleable configuration:
A319-112 PTI
7. STRUCTURAL LIMITATIONS
Condition:
A319-112 PTI
7.2 Cumulative load limits
Remarks: The cumulative load limits are only valid for the cabin for which this document is issued
The sum of cabin and cargo cumulative loads for each loading zone must not exceed the
cumulative load limits.
A319-112 PTI
7.6 Combined Load Limits
Applicability:
MAX
Location Location Location Location Location combined Remarks
weight*
Remark:
A319-112 PTI
7.7 Area Load Limits
Condition:
A319-112 PTI
1 AIRCRAFT START WEIGHT TYPE
Basic Weight
DOW
Note: Items not selected are included in the total traffic load weight
Remarks: Flight Deck Hand Baggage and Cabin Crew Hand Baggage is included
A319-112 PTI
2.2 Crew Codes
Fill in flight deck and cabin crew locations. For each crew code, identify the number of crew members
seated at the corresponding location.
Remarks:
A319-112 PTI
Remarks:
A319-112 PTI
2.4 Potable Water Codes
Balance
Adjustment Code Description Weight Index Remarks
arm
Remarks:
A319-112 PTI
2.6 Weight Configuration Codes
Code References
Weight Config
Service Service Service
Code Crew Pantry Potable Water
Weight Adj Weight Adj Weight Adj
Remarks:
A319-112 PTI
2.7 AIRCRAFT START WEIGHT TYPE
Fleet %MAC:
Fleet Weight: Fleet H-arm:
Fleet Index:
Registration/ Enter Adjustments Weight Config
Remarks
Tail Number Weight %MAC H-arm Index Code
Remarks:
Registration / Weight
Weight %MAC H-arm Index Remarks
Tail Number Config Code
D-APTA 41158 24.35 48.88 BEW
D-ASPA 42370 22.83 46.16 BEW
D-ASPB 42355 22.19 45.00 BEW
Remarks:
A319-112 PTI
3 LIMITATIONS
Remarks:
Remarks:
A319-112 PTI
4 ULD COMPATIBILITY
HOLD NAME:
ULD Compatibility – Indicate which ULDs can OR cannot be loaded and any weight limitation
Y = Compatible or indicate restrictive weight (Y/nnnn)
N = Not Compatible
Applicability code: Y = Compatible, N = Not Compatible, or a number to indicate a restrictive weight.
Position/ Enter ULD Code below and then indicate applicability with entered position
Bay
Example indicator: Y, N, or Y/1436 - The ULD is allowed but has a max weight limit of 1436.
Remarks:
A319-112 PTI
5 SPECIAL LOADS
Hold name:
A319-112 PTI
2 BUSINESS RULES (OPTIONAL)
Loading information
Preferred positions Priority Remarks
Code *
* As per AHM510
A319-112 PTI
2.4 Potable Water