Professional Documents
Culture Documents
IT
RTU560
Industrial Remote Terminal Unit
Connections and Settings
Communication Unit 560CMU80
Application, characteristics and technical data interfaces (CP1, CP2, CPA) and one Ethernet
have to be taken from the hardware data sheet: 10BaseT LAN interface (only R0002).
The 560CMU80 may be mounted at defined
560CMU80 1KGT 150 493 positions for communication unit in the housing.
The module has no configuration elements
Operation (jumpers).
The connection to the RTU560 system bus is
The communication unit 560CMU80 is the CMU
done via 48pole DIN-F socket connector
board (CMU = communication unit) of the remote
according to DIN 41612.
terminal unit. The 560CMU80 controls process
events and communication via max. three serial
RS232
PC104-Bus
5 GND -
Male
7 RTS output
8 CTS input
1 Not used 1
Table 1: Meaning of LEDs
2 TA - Input/Output
3 TB + Input/Output 8
4 Not used
5 GND -
6 Not used
7
8
ALARM / WARNING
ALARM and WARNING are activated by the
watchdog or by a RTU560E communication unit.
On signaling ALARM the signal WARNING is also
activated (Fig. 6).
WRN
ALR WRN
1
WRN
ALR
1
ALR
ATR
30 s
Plug-in
terminal strip
ALR
WRN - X3
10BaseT - X5
CPA - X6
LA
LA1
Modem2 - X7
LB
MMI-X2
LB1
CP2- X8
MODEM-MODULE2-X12
LA
LA1
Modem1 - X9
LB
LB1
CP1 - X10
Compact Flash-X13
MODEM-MODULE1-X11 560CMU80
ΑΒΒ
ABB Utilities GmbH
Kallstadter Str.1, 68309 Mannheim
Telefon: +49 (0) 621 381-7592
Telefax: +49 (0) 621 381-7622
www.abb.de/uta