- Vlad and his friend discuss Vlad's report on hysteresis and magnetic fields. They exchange information on key topics to include in the report, such as hysteresis lagging behind magnetic field variations, magnetic fields aligning magnetic materials like compass needles, and hysteresis loss occurring from repeated magnetization and demagnetization, which is minimized in transformer cores and electromagnets. Vlad's friend thanks him for his helpful explanations for completing the report.
- Vlad and his friend discuss Vlad's report on hysteresis and magnetic fields. They exchange information on key topics to include in the report, such as hysteresis lagging behind magnetic field variations, magnetic fields aligning magnetic materials like compass needles, and hysteresis loss occurring from repeated magnetization and demagnetization, which is minimized in transformer cores and electromagnets. Vlad's friend thanks him for his helpful explanations for completing the report.
- Vlad and his friend discuss Vlad's report on hysteresis and magnetic fields. They exchange information on key topics to include in the report, such as hysteresis lagging behind magnetic field variations, magnetic fields aligning magnetic materials like compass needles, and hysteresis loss occurring from repeated magnetization and demagnetization, which is minimized in transformer cores and electromagnets. Vlad's friend thanks him for his helpful explanations for completing the report.
- Hi, I`m fine but a little bit busy, and you? Oh, I`m cool, just finished my affairs. What you busy with, maybe I can help you? - Of course, you can help me! I have to make some small report about Hysteresis and Magnetic Field. Nice topic, I’m quite knowledgeable in the Hysteresis and Magnetic Field - Sounds good. I’d like to divide my article into some parts : Hysteresis, Magnetic Field and hysteresis loss . Yeah cool, what do you know about Hysteresis? - I know that Hysteresis is a lagging of the magnetization of a ferromagnetic material, such as iron, behind variations of the magnetizing field. When ferromagnetic materials are placed within a coil of wire carrying an electric current, the magnetizing field, or magnetic field strength H, caused by the current forces some or all of the atomic magnets in the material to align with the field. Ok, also you can add an interesting fact. The aligning process does not occur simultaneously or in step with the magnetizing field but lags behind it. - Well, I'll take that into consideration. What about magnetic field. Magnetic field is a region in the neighbourhood of a magnet, electric current, or changing electric field, in which magnetic forces are observable. - Also, I know that Magnetic fields such as that of the Earth cause magnetic compass needles and other permanent magnets to line up in the direction of the field. Yeah, you`re completely right. It is because magnetic fields force moving electrically charged particles in a circular or helical path. This force—exerted on electric currents in wires in a magnetic field—underlies the operation of electric motors. - Around a permanent magnet or a wire carrying a steady electric current in one direction, the magnetic field is stationary and referred to as a magnetostatic field. Is it right? Yes, you’re right. More over around an alternating current or a fluctuating direct current, the magnetic field is continuously changing its magnitude and direction. - Cool, do you know that if the magnetic field applied to a magnetic material is increased and then decreased back to its original value, the magnetic field inside the material does not return to its original value. Yes, this behavior results in a loss of energy, called the hysteresis loss, when a sample is repeatedly magnetized and demagnetized. - And where this is used? The materials used in transformer cores and electromagnets are chosen to have a low hysteresis loss. - Ok, I noted it. I think it will be enough for my report. Well, don't forget to make the main theses for yourself to make your speech report easier. - Thanks, I'll take that into consideration, I appreciate your help! Oh don’t warry about it, just put a beer. - Okay, thanks one more time!