Professional Documents
Culture Documents
EXPLODED VIEW.
WHAT YOU NEED.
X30 4mm [D] x 16mm [L] Wood screws. Similar spec to the link:
https://www.screwfix.com/p/goldscrew-plus-pz-double-countersunk-multipur
pose-screws-4-x-16mm-200-pack/3815f
X1 Screwdriver [That matches your screws]
X10 GD Hexagon
X5 GD Diamond
X1 GD Upper Pentagon
X1 GD Lower Pentagon
Step 1.
Select the GD Upper Pentagon Part.
Join the GD Hexagon part to the GD Upper Pentagon part as shown.
Pay close attention to the form of this screw boss. The part has been designed to only fit
one way, the raised tab on this part joins with the GD Upper Pentagon the matching screw
bosses join to the GD Diamond parts [shown later in the document].
Step 2.
Join the second GD Hexagon to the GD Upper Pentagon as shown.
Step 3.
Repeat Step 2, three more times, your assembly should look like the one
shown above and on the next page.
Step 4.
Select the GD Diamond part.
Join the GD Diamond part to the GD Hexagon components as shown above
and on the next page.
Step 5.
Repeat Step 4, four more times. Your assembly should look like the one on
the next page.
Step 6.
Join the GD Hexagon part to the GD Diamonds as shown above.
Step 7.
Repeat Step 6, four more times. Your assembly should look like the one
shown above and on the next page.
Step 8.
Insert the E27 lamp holder and light bulb as shown.
Step 9.
Install the GD Lower Pentagon with five screws as shown.
Your Geodesic Sphere is complete! We hope you love it as much as we do!