Professional Documents
Culture Documents
Technical information
TI 320A
Chemical Resistance tiles and bricks Issue 19|01|2017
Unless otherwise indicated, the resistance tests were per- Bleaching Liquor, Eau de Javelle + (+)
formed using chemicals of technically customary purity
Borax + +
grades. The concentrations of inorganic salts and organic
solids, insofar as they are water-soluble, correspond to Boric acid + +
saturated solutions at 20 °C. Calcium bisulphite + +
The information contained in this Technical Information Calcium chlorate + +
should be used as a guideline only. Additional testing is
Calcium chloride + +
required when products are exposed to a combination of
chemicals or used under divergent pressure or temperat- Calcium formate + +
ure conditions. Calcium Hydroxide aqu. + +
Explanation of Symbols Calcium nitrate + +
+ = resistant Calcium sulphate + +
(+) = conditionally resistant, when used in floor applica- Carbon dioxide + +
tions, short-time exposure at room temperature still toler- Carbon monoxide + +
able
Carbon tetrachloride + +
− = not resistant
Castor oil + +
Rinse immediately with sufficient amount of water!
Chlorinated lime + -
Test temperature: 50 °C
Chlorine Dioxide, aqu. solution ≤ + -
Test period: 12 months 5%
A = Ceramic tiles and bricks Chlorine water saturated + -
B = Carbon tiles and bricks / Graphite bricks Chlorine, gaseous + -
Chloroform + +
Tiles and Bricks Chromic acid 10 % + -
A B Chromic acid 20 % and Sulfuric + -
Acetone + + acid 2 %
Acetic acid 0 - 96 % + + Chromic salts + -
Aluminium chloride + + Citric acid + +
Aluminium sulfate + + Cobalt nitrate + +
Ammonia solution 5 % + + Coconut fatty acid + +
Ammonia solution 10 % + + Copper acetate + +
Ammonia solution 25 % + + Copper sulfate + +
Ammonium carbonate + + Cresols + +
Ammonium chloride + + Crude oil + +
Ammonium cyanide + + Cyclohexanone + +
Ammonium nitrate + + Dibutyl phthalate + +
Ammonium persulphate + (+) Dioctyl phthalate + +
Ammonium phosphate + + Ethanol - Water 1 : 1 + +
Ammonium sulfate + + Ethanol (Ethyl alcohol) + +
Aniline + + Ferric chloride + +
Animal oils + + Ferrous sulphate + +
Barium chloride + + Fertilizer + +
Barium sulfate + + Formaldehyde Solution 37 % + +
Battery Acid + + Formic acid 1 % + +
Beer + + Formic acid 5 % + +
Beet syrup + + Formic acid 10 % + +
Benzene + + Fruit juice + +
Benzoic acid (aqueous) + + Fuel oil + +
page 1 / 3
We master aggressive media
page 2 / 3
We master aggressive media
Sodium bromide + +
Sodium carbonate + +
Sodium chloride + +
Sodium cyanide + +
Sodium hydroxide 0.5 % + +
Sodium hydroxide 5 % (+)* +
Sodium hydroxide 10 % (+)* +
Sodium hydroxide 50 % - +
Sodium hypochlorite + -
Sodium nitrate + +
Sodium nitrite + +
Sodium phosphate + +
Sodium sulfide + +
Sodium sulfite + +
Sodium sulphate + +
Sodium tartrate + +
Sodium thiosulfate + +
Succinic acid + +
Sugar + +
Sulfur dioxide / Sulfur trioxide + +
(exhaust gas)
Sulfuric acid 10 % + +
Sulfuric acid 20 % + +
Sulfuric acid 40 % + +
Sulfuric acid 60 % + +
Sulfuric acid 80 % + -
Sulfuric acid 96 % + -
Sulphoammonium solution + +
Tartaric acid + +
Terpentine + +
Toluene + +
Trichlorethylene + +
Trisodium phosphate + +
Urine + +
Water + +
Wine + +
Xylene + +
Zinc chloride + +
Zinc nitrate + +
Zinc sulfate + +
All information contained in this Technical Information sheet is based on the present state of our knowledge and practical
experience. All data are approximate values for guidance only. A legally binding warranty of certain characteristics or the
suitability for a certain purpose of use cannot be derived from this.
The information given in this Technical Information sheet is our intellectual property. The Technical Information sheet
may neither be copied nor used by unauthorized parties, nor professionally distributed or otherwise made accessible to
third parties without our prior consent.
This issue replaces all previous versions.
page 3 / 3
We master aggressive media