Professional Documents
Culture Documents
Advantages
Some references: 1. Opportunity to use the same combination machines room
• ALCATEL- LUCENT ITALIA SPA, ITALY – air temperature control unit on walk-in chambers.
• ARCELIK, TURKEY 2. Time reduction of design and production phases.
• KOREA TESTING LABORATORY 3. Easier assembly on site.
• GATEHILL INTERNATIONAL LTD. , CHINA 4. Easier disassembly and re-assembly of the equipment, if
• VESTEL, TURKEY necessary.
• POLITECHNIKA,POLAND 5. Possibility to use machine units supplied by ACS on walk-
in chambers which are property of the Customer.
Vibration test chambers – “anyvib”™
RT1000
CHAMBER FOR TESTING THE DEGREES OF PROTECTION AGAINST RAIN
AND SPRAYS ACCORDING TO CEI EN 60529 STANDARD (FIG
(FIG. 4) IPX3 AND
IPX4 PROTECTION CLASSES
Some references:
KOMAG POLAND
• KOMAG,
• VALEO, HUNGARY
• LUCAS-TVS LIMITED, INDIA
• PACKARD KOREA INC., KOREA
• MAGNETI MARELLI, ITALY
• FIAT AUTO, ITALY
SD1000 F
SD1000 S CHAMBER FOR TESTING PROTECTION AGAINST
CHAMBER FOR SAND AND DUST TEST DUST ACCORDING TO THE EN 60529 FIG
FIG. 2
ACCORDING TO SAE J575 STANDARD NORM -IP5X CLASS OF PROTECTION
Vacuum chambers
Test safety
Tests on batteries can generate potentially dangerous situations, since they are
carried out by simulating the limit conditions that may occur when there is a
transfer of energy
energ from the batter
battery to the electric motor or d
during
ring the batter
battery’s
’s
fast recharge phase. These situations, in fact, may generate strong overheating or
the formation of dangerous atmospheres.
To handle and solve these problems, our chambers are equipped with all the
instruments necessary for monitoring potentially dangerous parameters and the
following main devices which are activated to eliminate any risk conditions:
• Smoke sensors
• Dangerous gas (H2; O2; CO; CO2; …) sensors
• Stabilization system
• Flame extinguishing system
Optional customer defined isolated power and signal connections for external
electrical loading of customer test items within the chamber are available.
ESS chambers
Since the real beginning in 1932 ANGELANTONI INDUSTRIE have always been
facing new technical challenges.
In the field of environmental testing the highest
objective was achieved in 1988, with the design and
production of complex test chambers to artificially
create the operating conditions (temperature and
high vacuum) of equipment used on board of
spacecrafts and satellites, or of a whole satellite.
This has been possible thanks to a skilled and “passionate” team of engineers and
manufacturing professionals,
professionals besides selected Italian and international partners.
partners
Main customers
Temperatures vary between -180°C and +150°C (using 15 independent shrouds) and vacuum
reaches the limit of 10–7 mbar thanks to special cryogenic pumps running at 10°K (-263°C).
The space simulator was completely designed
in Italy by Angelantoni technical staff; eight
engineers, already skilled and experienced in
this kind of big thermo-vacuum plants, worked
at this project supported by Indian engineers
that locally collaborated developing a part of
the S/W and during the installation phases.
phases
Italian staff included Mechanical Engineers,
Electrical Engineers, S/W Development
Engineers and Project Managers.
CNR
Special Applications
IABG - Munich
Tests:
thermal cycles
humidity and freezing
infrared radiation
cyclic corrosion
Testing objective:
to accelerate corrosion processes on complete
vehicles turned-on
Special Applications
Testing objectives:
to evaluate the quality of photovoltaic modules
to determine their reliability and life time
Tests:
thermal cycles
humidity and freezing
damp heat
Special Applications
Capacity: 1050 cu
cu.mt.
mt approx
TUBITAK – Turkey