Professional Documents
Culture Documents
PHOTOELECTRIC
SENSORS Ver.2 Certified
MICRO
PHOTOELECTRIC
SENSORS
Conforming to
AREA OSHA / ANSI
SENSORS Listing
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
PRESSURE / Conforming to GB/T 4584 Certified
FLOW (Excluding SF4B-□-03<V2>) (SF4B-□<V2> only)
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR (SF4B-□-03<V2> only)
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
Category 4 PLe SIL3 panasonic.net/id/pidsx/global
STATIC
CONTROL The control category differs depending on the configuration and wiring of the external circuit.
DEVICES
LASER
MARKERS
Protection structure IP67
PLC
New version with improved environmental resistance performance
HUMAN MACHINE
INTERFACES It is possible to select from each three types of standard / robust types depending on the worksite
ENERGY
MANAGEMENT
SOLUTIONS
A wide range of variations are available with protective heights of 230 to 1,910 mm 9.055 to 75.197 in
(1,270 mm 50.000 in for the finger protection type). Mixing six types in a series connection is also possible.
FA COMPONENTS
Finger protection type SF4B-F□(G□)<V2> Hand protection type SF4B-H□(G□)<V2> Arm / Foot protection type SF4B-A□(G□)<V2>
MACHINE VISION Minimum sensing object Minimum sensing object Minimum sensing object
UV CURING mm
mm mm
mm mm
mm
SYSTEMS ø0.551 in ø0.984 in ø1.772 in
(10 mm 0.394 in beam pitch) (20 mm 0.787 in beam pitch) (40 mm 1.575 in beam pitch)
Selection * In the case of “When used as safety device for presses in China”, the protective height differs. For details, refer to p.509~ / p.534~ and “Definition of
Guide
Safety Light sensing heights” (p.645).
Curtains
Safety
Control Units
Safety
Global support for the safety of press machines or shear (paper cutting) machines
Components
Can be widely used for press machines and other types of equipment from Japan, Europe, North America, South Korea, and China.
SF4D
● : Available
SF4B/ Machinery EMC UL Japanese Press Japanese Shear S-mark Korean Press / Chinese GB
Type Model No.
SF4B-G Directive Directive Certified Machine Support (Paper Cutter) Support certification Cutting Machine Compatibility
SF4B-C SF4B-□<V2> ● ● ● ● ●
SF4C SF4B-□G<V2> ● ● ● ●
Safety SF4B-A□-01<V2> ● (No.TA523) ● (No.TA521) ●
BSF4-AH80
light SF4B-H□-01<V2>
SF2B curtains ● ● ●
SF4B-H□G-01<V2> ● (No.TA524) ● (No.TA522) ●
SF2C SF4B-F□-01<V2>
Definition of SF4B-□-03<V2> ● ● ● ●(No.09-AV4BI-0001 to 0009)
Sensing Heights
(No.TA525) (Note 1)
SF-C11 ● ● ● ● ●
(No.TA526) (Note 2)
SF-C12 ● ● ●
Control (No.TA527) (Note 1)
SF-C13 ● ● ● ● ●
units (No.TA528) (Note 2)
SF-C14EX ● ● ●
(No.TA529) (Note 1)
SF-C14EX-01 ● ● ● ●
(No.TA530) (Note 2)
Notes: 1) In combination with SF4B-A□-01<V2>.
2) In combination with SF4B-H□-01<V2> / SF4B-H□G-01<V2> / SF4B-F□-01<V2>.
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
502
APPLICATIONS FIBER
SENSORS
Detecting the intrusion and Detecting the intrusion of a human being: Example 1 Detecting the intrusion of a human being: Example 2 LASER
presence of a human being SENSORS
The safety light curtains allow you to discriminate between a workpiece By using the fixed blanking function,
and a human being by performing muting control for each beam axis. obstacles that always exist are ignored. PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
A unified response time of 14 ms for all models makes calculation work easy PARTICULAR
USE SENSORS
A fast response time of 14 ms has been achieved regardless of the number of beam channels, the beam axis pitches
SENSOR
and the number of units connected in series. This reduces calculation work required for the safety distance. OPTIONS
SIMPLE
14 ms even in case of 3 units connected in series! WIRE-SAVING
UNITS
Safety distance
Safety distance (Note) WIRE-SAVING
Same response SYSTEMS
time of Characteristic distance for
14 ms the machinery’s MEASUREMENT
maximum stopping time SENSORS
STATIC
CONTROL
DEVICES
Finger protection type Hand protection type
Series connection allows max. 3 sets or a total of LASER
28 mm* 1.102 in or 116 mm*4.567 in up to 192 beam axes. MARKERS
Dangerous source
Safety distance PLC
(Note)
Characteristic Characteristic distance
HUMAN MACHINE
distance for for the machinery’s INTERFACES
safety light maximum stopping time
curtain ENERGY
MANAGEMENT
SOLUTIONS
FA COMPONENTS
MACHINE VISION
SYSTEMS
UV CURING
SF4B series SYSTEMS
Characteristic distance
for SF4B series
* It is the characteristic distance for safety light curtain based on ISO 13855.
Note: Calculate the safety distance based on the distance depending on the safety light curtain and the distance depending on the maximum halting Selection
time of machinery. Install the safety light curtain according to the relevant standards of the region where the safety light curtain is used. Guide
Safety Light
Improved environmental resistance performance and easier operability New structure Curtains
Safety
Control Units
Protection structure IP67 in a very compact size Safety
Components
A seamless structure with minimal joints has now been developed. The inner unit is protected by a cylindrical inner
case. Seams on the unit and lens surfaces have been greatly reduced so that particles such as oil mists and dust are SF4D
prevented from penetrating the case. Thus, the environmental resistance performance could be raised.
SF4B/
SF4B-G
SF4B-C
SF4C
Slim
28 mm 1.102 in BSF4-AH80
SF2B
SF2C
Inner case Definition of
Sensing Heights
Cylindrical inner case
protects the internal unit.
This new structure does not use adhesive
or double-sided tape on the joints like
with the previous models. There is no
need to worry about water immersion
or corrosion such as a coolant causing
the adhesive to strip off.
SF4B / SF4B-G series Ver.2 has passed the tests of IP65 and IP67 as specified by IEC / JIS standards.
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
503 Safety Light Curtain Type 4
FIBER Error details can be understood at a glance with a digital error indicator
SENSORS
LASER The system constantly checks the safety light curtain for
SENSORS problems such as incorrect cable wiring, disconnection, Angle of view is wider and
short-circuits, internal circuit problems, and incoming light indicators are even more visible
PHOTOELECTRIC
SENSORS problems. Details of any electrical problems such as at
MICRO equipment startup will appear on the digital display. It is
PHOTOELECTRIC no longer necessary to count the number of times the LED
SENSORS
blinks, making the system much more convenient.
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
Error number notification means smooth support via telephone
PRESSURE /
FLOW Normal operation Breaking out error
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE Digital error
WIRE-SAVING indicator
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES A muting control function is provided to increase both safety and productivity (excluding SF4B-□-03<V2>)
LASER
MARKERS The safety light curtain is equipped with
Muting sensors
a muting control function that causes the Muting
PLC line to stop only when a person passes lamps
through the safety light curtain, and does
HUMAN MACHINE not stop the line when an object passes Muting lamps
INTERFACES Safety light
through. The muting sensors and muting curtain SF4B
ENERGY
MANAGEMENT lamps can be connected directly to the SF4B series series
SOLUTIONS safety light curtain so that a exclusive
FA COMPONENTS
controller is not required for muting. This
both reduces costs and increases safety External device
Muting sensors (Force-guided relay, etc.)
MACHINE VISION and productivity. CX-400 series
SYSTEMS
UV CURING
SYSTEMS Motor, etc.
Override function allows the line to be restarted smoothly after it has stopped while muting control was active (excluding SF4B-□-03<V2>)
Selection
Guide In case the power turns off while the Example: When power turns off while safety light curtain was interrupted
Safety Light safety light curtain has been interrupted
Curtains
by an object or in case the line stops Previous model SF4B series
Safety
Control Units before the muting conditions have been
Safety
Components established (if only one muting sensor has Removal No removal
been interrupted), the line can be restarted operation necessary
smoothly without having to remove the required
SF4D
object that is interrupting the safety light
SF4B/ curtain.
SF4B-G
SF4B-C
SF4C
BSF4-AH80 Object must be removed before restart Smooth restart
SF2B
SF2C
Definition of
Sensing Heights
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
504
Equipped with a safety circuit that does not require an exclusive safety relay unit FIBER
SENSORS
The safety light curtain has a built-in Previous model LASER
external device monitoring function (such Reset input
SENSORS
as for monitoring whether relays have PHOTOELECTRIC
fused) and an interlock function. The SENSORS
Monitor
safety circuit is built without safety relay MICRO
unit and size reduction of a control board PHOTOELECTRIC
SENSORS
is achieved, which contributes to cost
AREA
reduction. External devices
SENSORS
Safety light curtain Safety relay unit (Force-guided relay, etc.) Motor, etc.
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
SF4B series PRESSURE /
FLOW
Reset input SENSORS
INDUCTIVE
No safety relay PROXIMITY
Monitor
unit needed SENSORS
Smaller Built-in external PARTICULAR
control board device monitoring USE SENSORS
function External devices SENSOR
SF4B series (Force-guided relay, etc.) Motor, etc. OPTIONS
SIMPLE
◦Safety relay WIRE-SAVING
UNITS
Panasonic Corporation
WIRE-SAVING
SF relay, slim type SYSTEMS
SF relay, slim type MEASUREMENT
SFS3-L-DC24V (AG1S132) SENSORS
SFS4-L-DC24V (AG1S142)
STATIC
CONTROL
DEVICES
LASER
DIN terminal block MARKERS
SFS4-SFD (AG1S847) [4-poles type]
SFS6-SFD (AG1S867) [6-poles type]
PLC
Note: Contact Panasonic Corporation for details on the recommended products.
HUMAN MACHINE
INTERFACES
ENERGY
Beam-axis alignment indicators show the incident light position at a glance MANAGEMENT
SOLUTIONS
Beam-axis alignment indicators display the beam channels of the safety light curtain in four blocks. When the beam FA COMPONENTS
channel at the bottommost channel (or topmost channel), which is used as a reference for beam-axis alignments, is
MACHINE VISION
correctly aligned, the LED blinks red. After this, each block lights red as the beam axes successively become aligned. SYSTEMS
When all channel beam axes are aligned, all LEDs light green. The display also has an additional stability indicator
(STB) so that setup can be carried out with greater stability. UV CURING
SYSTEMS
Beam axes are The bottommost beam The beam axes of the two All beam axes
displayed in 4 blocks axis is aligned lower blocks are aligned are aligned
Selection
4 block
Guide
Safety Light
A A A Curtains
B B B Safety
A C C Light C Light Control Units
3 block
B D Blinking D up D up Safety
C Components
D
OSSD OSSD OSSD Light
STB STB STB up
OSSD SF4D
2 block
STB SF4B/
SF4B-G
SF4B-C
SF4C
1 block
The bottommost LED ‘D’ The two bottom LEDs ‘C, D’ All LEDs ‘A to D’ BSF4-AH80
is blinking red light up in red light up in green
Furthermore, STB display SF2B
allows the most stable incident
light status* to be confirmed. SF2C
* 140 % or more incident light intensity Definition of
of control output operation level Sensing Heights
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
505 Safety Light Curtain Type 4
LASER The SF4B / SF4B-G series combines PNP transistor output and NPN transistor output in a single model. Overseas
SENSORS equipment that uses PNP, replacement with NPN sensors, factories that are positively grounded, and transfer of
PHOTOELECTRIC
equipment overseas are all situations where the control circuits for a single model are suitable for use a.
SENSORS ■ Polarity can be changed easily by changing wiring
MICRO When the output polarity setting wire (shielded) is
PHOTOELECTRIC
SENSORS connected to 0 V, PNP output is selected, and when it
AREA
is connected to 24 V, it switches to NPN output.
SENSORS
PNP circuit 0V
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS PNP/NPN polarity indicator
Output polarity setting wire (Shield) Either PNP or NPN side lights
PRESSURE /
SENSORS
FLOW depending on which is selected.
Output polarity setting wire (Shield) Control output (OSSD)
INDUCTIVE
PROXIMITY Connect to 0 V PNP output
SENSORS NPN circuit 24 V Connect to 24 V NPN output
PARTICULAR Not connected / open Error
USE SENSORS
SENSOR
OPTIONS
Laser alignment tool for easy installation Greatly improved ease of installation
SIMPLE
(excluding SF4B-□G□<V2>) New structure
WIRE-SAVING
The tool performs beam-axis alignment using a laser
UNITS beam spot. As the tool is battery-operated, it is possible The hexagon-socket head bolts used for aligning the
WIRE-SAVING to perform beam-axis alignment before supplying power beam axis can be accessed from the front of the safety
SYSTEMS to the equipment. light curtain. Beam adjustment can be carried out easily
MEASUREMENT while turning
SENSORS Laser alignment tool
the bolts. Hexagon-socket 360° rotation
STATIC
CONTROL The topmost beam axis Also, the when used with M5 hexagon-socket
head bolt for beam-axis head bolt for alignment
DEVICES is correctly aligned beam-axis alignment (up to ±15˚)
LASER alignment
MARKERS part is directly
Visible red spot! and firmly
PLC
fixed with M5
bolts so that Hexagon-socket
HUMAN MACHINE
INTERFACES beam axes head bolt for alignment
misalignment (360˚ rotation for every 30˚)
ENERGY
MANAGEMENT The bottommost channel beam axis can be Hexagonal wrench Mode
Made of die-cast!
SOLUTIONS
is correctly aligned prevented. Align at the front!
FA COMPONENTS
Direct fixing to prevent misalignment!
MACHINE VISION
Few number of bolts!
SYSTEMS
UV CURING
SYSTEMS Easy to distinguish receiver and emitter
Emitter is gray, receiver is black. Whether during startup Black connector Gray cable with black line Black cover RECEIVER
or maintenance, troubles due to incorrect wiring or false
Receiver
recognition can be greatly reduced. Moreover, the model
Selection No. can be checked at the front face of the safety light
Guide curtain. Model No. is shown on the front face of the sensor
Safety Light
Curtains
Safety Emitter
Control Units
Safety Gray connector
Components Gray cable Gray cover EMITTER
5 mm AREA
SENSORS
SAFETY LIGHT
0.197 in CURTAINS /
SAFETY COMPONENTS
U-shape / PRESSURE /
Loads applied –Dropped FLOW
L-shape guard
SENSORS
INDUCTIVE
PROXIMITY
Front protection cover SENSORS
PARTICULAR
The front protection cover protects the USE SENSORS
Fully protected sensing surface sensing surface from welding spatter and
SENSOR
The sensing surface is fully protected by narrowing and deepening reduces damage OPTIONS
the exposed area of the sensing surface. due to collisions. SIMPLE
The beam axis Front protection
cover
WIRE-SAVING
Previous product SF4B-□G□<V2> adjuster can be UNITS
Collision with sensing surface Sensing surface protected attached without WIRE-SAVING
SYSTEMS
removing the front
Narrow protection cover. MEASUREMENT
SENSORS
STATIC
Deep CONTROL
DEVICES
Protection structure IP67 LASER
MARKERS
The seamless structure protects the sensor
from being exposed to water. PLC
HUMAN MACHINE
INTERFACES
Round design minimizes damage to the workpiece Mounting bracket for simple & secure installation ENERGY
MANAGEMENT
The case is designed so that shock upon impact is The safety light curtain and the mounting bracket are SOLUTIONS
dissipated alleviating potential damage to the workpiece firmly secured with just two bolts. The safety light curtain
FA COMPONENTS
in the event of a collision. is situated in the
center of the Thickness
4
Previous product SF4B-□G□<V2> MACHINE VISION
mounting bracket, SYSTEMS
preventing beam mm
0.157 in UV CURING
axis deviation. The SYSTEMS
dimple structure M5 bolt × 2
makes alignment
easy to adjust. M5 beam axis
adjustment bolt
Selection
Dimple structure Guide
Safety Light
M8 center Curtains
attachment bolt Safety
Large impact on collision Small impact on collision Control Units
Safety
Components
Workpiece not contaminated with paint Black and yellow caution tape
SF4D
The body has an alumite-treated case so that paint does Black and yellow striped attention tape is attached to the
SF4B/
not stick to the workpiece in the event of a collision. side of the safety light curtain, alerting workers to use SF4B-G
caution. Hazardous openings are very obvious. SF4B-C
Enables series connection with standard type possible Caution tape SF4C
・SF-TP-BG10 BSF4-AH80
The mating cable is standard, allowing the robust and
standard types to be connected in series. SF2B
SF2C
Definition of
Sensing Heights
Special tape
• Fit to width of safety light curtain
• Made of fabric, making it easy to cut
Standard type Robust type Standard type • Prevent damage at the time of collision
LASER
A single corner mirror makes it possible to Normally for L-shaped or U-shaped
SENSORS eliminate one safety light curtain set and its installation, 2 or 3 sets of safety
associated peripheral safety circuits. light curtains are needed. With the
PHOTOELECTRIC use of a corner mirror reflecting
SENSORS This enables costs to be greatly reduced,
the light, one set of safety light
MICRO
and also eliminates wiring needs. The curtain is possible for L-shaped or
PHOTOELECTRIC control category is unchanged. U-shaped installation.
SENSORS
Corner mirror
AREA RF-SFBH-□
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
Handy-controller SFB-HC (optional) that enables the user to select a variety of settings
PRESSURE /
FLOW Separate muting control function for each beam channel
SENSORS
INDUCTIVE The handy-controller SFB-HC* (optional) can be used
PROXIMITY to carry out muting control for specified beam axes only.
SENSORS
Because individual beam axes can be specified to suit
PARTICULAR
USE SENSORS the object, separate guards to prevent entry do not need
to be set up.
SENSOR
OPTIONS While muting control is active (line operating) Line stopped
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS SFB-HC
STATIC
CONTROL
DEVICES For example, depending on the height of the object, the muting function
can be activated for 10 beam channels starting from the bottom, so that if *A
handy-controller cannot be used with the
LASER
MARKERS the 11th or subsequent beam channels are interrupted, it is judged that a SF4B-□-01<V2>(p.509), SF4B-□-03<V2>(p.509) and the
person has entered the area and the line stops. SF-C14EX-01(p.514 / p.663).
PLC
Specific beam axes can be deactivated A variable number of beam axes can be deactivated
HUMAN MACHINE
INTERFACES The SF4B / SF4B-G series incorporates a fixed blanking function. The SF4B / SF4B-G series incorporates a floating blanking function.
ENERGY
MANAGEMENT
The SF4B / SF4B-G series is 1, 2 or 3 non-specified
SOLUTIONS equipped with a fixed blanking beam channels can be
function which allows specific deactivated. If the number
FA COMPONENTS
beam channels to be selectively of beam channels that are
MACHINE VISION
interrupted without causing the blocked is less than or
SYSTEMS control output (OSSD) to output equal to the set number of
the OFF signal. This function beam channels, then the
UV CURING
SYSTEMS is convenient for use with control output (OSSD) will
applications in which certain fixed not output the OFF signal.
obstacles tend to block specific This function is useful in the
beam channels. event when the positions of
Furthermore, this function provides obstacles within the sensing
Selection greater safety as the control area must be changed Note: When the floating blanking
Guide function is used, the acceptable
Safety Light output (OSSD) will automatically during object rearrangement, size for the minimum sensing
Curtains output the OFF signal if the fixed or when an object passes object changes.
Safety
Control Units obstacles are subsequently through the safety light
Safety removed from the sensing area. curtain’s sensing area.
Components
Selectable configuration for auxiliary output A variety of other functions can be selected
SF4D
SF4B/ Mode No. Description Emission intensity control function
SF4B-G This function reduces the amount of emitting light.
0 Negative logic of the control output (OSSD 1, OSSD 2) (factory setting)
SF4B-C 1 Positive logic of the control output (OSSD 1, OSSD 2) The two modes, normal mode and short mode, can be
SF4C 2 For emission: output ON, For non-emission: output OFF selected (factory setting: normal mode).
3 For emission: output OFF, For non-emission: output ON Monitoring function
BSF4-AH80 4 For unstable incident beam: OFF (Note 1)
This function allows the user to confirm the details of
SF2B 5 For unstable incident beam: ON (Note 1)
6 For muting: ON
each safety light curtain setting.
SF2C 7 For muting: OFF Protection function
Definition of 8 For beam received: ON, For beam interrupted: OFF (Note 2) A password protection can be used to avoid
Sensing Heights 9 For beam received: OFF, For beam interrupted: ON (Note 2) unauthorized changes of the settings (factory setting:
Notes: 1) The output cannot be used while the fix blanking function, no password protection).
floating blanking function or the muting function is activated. Copy function
2) This device outputs the beam received/interrupted state at the Setting details can be copied to other safety light curtains.
detectable area regardless of fixed blanking function, floating This is helpful if you need the same settings on different devices.
blanking function, and muting function.
Muting lamp diagnosis setting
When the muting lamp diagnosis is disabled, the muting
function will continue to operate even if the lamp is blown.
* Refer to the instruction manual for details.
The instruction manual can be download from our website.
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
508
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
SF-C10 series COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
Supports both PNP and NPN polarities SF-C10 series Thin control unit SF-C13 SENSORS
PARTICULAR
USE
The SF4B / SF4B-G series enables the changeover of PNP/ 22.5 mm 0.886 in thinness has been realized. Possible to SENSORS
NPN inputs in a single model for reduction of registered install in a small space of the board.
SENSOR
model No. OPTIONS
SIMPLE
Connector connection control unit SF-C11 Application expansion unit SF-C14EX(-01) WIRE-SAVING
UNITS
The wiring with the safety light curtain is simple connector The three safety systems; safety light curtain output, muting WIRE-SAVING
SYSTEMS
connection. It reduces time for installation and replacement. control, emergency stop button have been integrated into a
single unit. MEASURE-
MENT
SENSORS
HUMAN
PRODUCT CONFIGURATION MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
Standard components (8-core cable) Muting control components (12-core cable, with interference prevention wire) UV
CURING
SYSTEMS
Component parts Component parts
7 7
1 Safety light curtain 1 Safety light curtain
Required 2 Mounting bracket (Optional) Required 2 Mounting bracket (Optional)
Selection
3 8-core bottom cap cable (Optional) 5 12-core bottom cap cable (Optional) Guide
Safety Light
4 8-core extension cable 6 12-core extension cable Curtains
1 (Optional, use for cable extension) 1 (Optional, use for cable extension) Safety
Control Units
7 Cable for series connection 7 Cable for series connection Safety
Components
(Optional, use for connection in series) (Optional, use for connection in series)
3 5
SF4D
4 6 SF4B/
2 2 SF4B-G
SF4B-C
Using SF4B-□-01<V2> as a safety device for a press or shearing machine (paper cutting machine) in Japan (See the above when using SF4B-□-01<V2> as a safety device for other types of machine)
SF4C
Standard components (8-core cable) Muting control components (12-core cable, with interference prevention wire) BSF4-AH80
Component parts Component parts SF2B
12 12
1 Safety light curtain 1 Safety light curtain SF2C
Required 2 Mounting bracket (Optional) Required 2 Mounting bracket (Optional) Definition of
Sensing Heights
8 8-core bottom cap cable (Optional) 10 12-core bottom cap cable (Optional)
9 8-core extension cable 11 12-core extension cable
1 (Optional, use for cable extension) 1 (Optional, use for cable extension)
12 Cable for series connection 12 Cable for series connection
(Optional, use for connection in series) (Optional, use for connection in series)
8 10
9 11
2 2
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
509 Safety Light Curtain Type 4
FIBER
SENSORS
ORDER GUIDE
LASER
SENSORS 1 Safety light curtains (Standard type) Mounting bracket and bottom cap cable are not supplied with the safety light curtain. Be sure to order them separately.
PHOTO-
ELECTRIC Model No. (Note 2) Number Protective height (mm in)
SENSORS Operating
of
MICRO Type Appearance range SFB-HC Korean Press compliant beam China Press compliant
PHOTO- (Note 1)
ELECTRIC non‑compatible (SFB-HC non-compatible) channels (GB/T 4584)(Note 3)
SENSORS
AREA
SF4B-F23<V2> SF4B-F23-01<V2> SF4B-F23-03<V2> 23 230 9.055 220 8.661
Min. sensing object ø14 mm ø0.551 in
SENSORS
5 mm SF4B-F31<V2> SF4B-F31-01<V2> SF4B-F31-03<V2> 31 310 12.205 300 11.811
SAFETY LIGHT Beam
0.197 in
CURTAINS /
SAFETY
channel SF4B-F39<V2> SF4B-F39-01<V2> SF4B-F39-03<V2> 39 390 15.354 380 14.960
No.
Finger protection type
COMPONENTS
(10 mm 0.394 in beam pitch)
MEASURE-
MENT
SENSORS 5 mm SF4B-H24<V2> SF4B-H24-01<V2> SF4B-H24-03<V2> 24 470 18.504 460 18.110
Beam
0.197 in
STATIC channel SF4B-H28<V2> SF4B-H28-01<V2> SF4B-H28-03<V2> 28 550 21.654 540 21.260
CONTROL No.
Hand protection type
channel 0.591 in
(40 mm 1.575 in beam pitch)
Selection
No. SF4B-A16<V2> SF4B-A16-01<V2> – 16 630 24.803 600 23.622
Guide
0.3 to 9 m SF4B-A18<V2> SF4B-A18-01<V2> – 18 710 27.953 680 26.772
Safety Light Protective height
Curtains 0.984 to 29.528 ft
Safety
SF4B-A20<V2> SF4B-A20-01<V2> – 20 790 31.102 760 29.921
Control Units
Safety
Beam pitch
40 mm 1.575 in
SF4B-A24<V2> SF4B-A24-01<V2> – 24 950 37.402 920 36.220
Components
SF4B-A28<V2> SF4B-A28-01<V2> – 28 1,110 43.701 1,080 42.520
SF4B-A32<V2> SF4B-A32-01<V2> – 32 1,270 50.000 1,240 48.819
SF4D 15 mm
0.591 in SF4B-A36<V2> SF4B-A36-01<V2> – 36 1,430 56.299 1,400 55.118
SF4B/
SF4B-G SF4B-A40<V2> SF4B-A40-01<V2> – 40 1,590 62.598 1,560 61.417
SF4B-C
SF4B-A44<V2> SF4B-A44-01<V2> – 44 1,750 68.898 1,720 67.716
0.3 to 7 m
SF4C 0.984 to 22.966 ft SF4B-A48<V2> SF4B-A48-01<V2> – 48 1,910 75.197 1,880 74.016
BSF4-AH80 Notes: 1) The operating range is the possible setting distance between the emitter and the receiver.
SF2B Actual operating range
Receiver cannot be 9 m 29.528 ft
0.3 m of the safety light curtain SF4B-F□<V2>, SF4B-H72/H80/H88/H96□<V2>, SF4B-A36/A40/A44/A48□<V2>,
placed in this range 0.984 ft
SF2C SF4B-F□G<V2>, SF4B-H72G/H80G/H88G/H96G□<V2>, SF4B-A36G/A40G/A44G/A48G<V2>: 7 m 22.966 ft
Setting range of
Definition of the receiver
Sensing Heights
LASER
1 Safety light curtains (Robust type) Mounting bracket and bottom cap cable are not supplied with the safety light curtain. Be sure to order them separately. SENSORS
PHOTO-
Operating Model No. (Note 2) Number Protective height (mm in) ELECTRIC
SENSORS
Type Appearance range of
SFB-HC beam China Press compliant MICRO
(Note 1) PHOTO-
non‑compatible channels (GB/T 4584) (Note 3) ELECTRIC
SENSORS
SF4B-F23G<V2> – 23 244 9.606 220 8.661 AREA
SENSORS
SF4B-F31G<V2> – 31 324 12.756 300 11.811
Min. sensing object ø14 mm ø0.551 in
SAFETY LIGHT
Beam 11.8 mm CURTAINS /
channel 0.465 in SF4B-F39G<V2> – 39 404 15.906 380 14.960 SAFETY
COMPONENTS
No.
Finger protection type
FLOW
SF4B-F55G<V2> – 55 564 22.205 540 21.260 SENSORS
Protective height
INDUCTIVE
SF4B-F63G<V2> – 63 644 25.354 620 24.409 PROXIMITY
0.3 to 7 m SENSORS
0.984 to 22.966 ft SF4B-F71G<V2> – 71 724 28.504 700 27.559
PARTICULAR
USE
SF4B-F79G<V2> – 79 804 31.654 780 30.708 SENSORS
11.8 mm CONTROL
Beam SF4B-H28G<V2> SF4B-H28G-01<V2> 28 564 22.205 540 21.260 DEVICES
channel 0.465 in
No.
SF4B-H32G<V2> SF4B-H32G-01<V2>
Hand protection type
Selection
Guide
Beam 21.8 mm SF4B-A14G<V2> – 14 564 22.205 520 20.472 Safety Light
Arm / Foot protection type
0.858 in Curtains
channel
No. SF4B-A16G<V2> – 16 644 25.354 600 23.622 Safety
0.3 to 9 m
(40 mm 1.575 in beam pitch)
Control Units
0.984 to 29.528 ft SF4B-A18G<V2> – 18 724 28.504 680 26.772 Safety
Protective height Components
SF4B-A20G<V2> – 20 804 31.654 760 29.921
Beam pitch SF4B-A24G<V2> – 24 964 37.953 920 36.220
40 mm 1.575 in SF4D
SF4B-A28G<V2> – 28 1,124 44.252 1,080 42.520 SF4B/
SF4B-G
SF4B-A32G<V2> – 32 1,284 50.551 1,240 48.819 SF4B-C
21.8 mm
0.858 in SF4B-A36G<V2> – 36 1,444 56.850 1,400 55.118 SF4C
SF4B-A40G<V2> – 40 1,604 63.150 1,560 61.417 BSF4-AH80
0.3 to 7 m SF4B-A44G<V2> – 44 1,764 69.449 1,720 67.716 SF2B
0.984 to 22.966 ft
SF4B-A48G<V2> – 48 1,924 75.748 1,880 74.016 SF2C
Definition of
Differences from standard type Sensing Heights
The robust type SF4B-□G□<V2> is different from the standard type SF4B-□<V2> in the following ways:
• Sensing width (protective height) (Note 1) • Profile • Net weight • Mounting bracket • Front protection cover
• Laser alignment tool • Noncompliant with Japanese and Korean press standard (Note 2)
• Noncompliant with Korean regulations
Other specifications, input/output circuits, and options are the same as for the standard type.
Notes: 1) In the case of “When used as safety device for presses in China”, there is no change in the protective height.
2) SF4B-H□G-01<V2> does not comply with Korean press standard only.
3) In the case of “When used as safety device for presses in China” the distance between the center of the first beam axis and the center of the last
beam axis of the device becomes the protective height. For details, refer to “Definition of sensing heights” (p.645).
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
511 Safety Light Curtain Type 4
FIBER
SENSORS
ORDER GUIDE
LASER
SENSORS 2 Mounting brackets Mounting bracket is not supplied with the safety light curtain. Be sure to order it separately.
PHOTO-
ELECTRIC
SENSORS
Designation Model No. Description
MICRO M8 rear mounting For rear mounting. Allows the safety light curtain to be mounted at the rear with one
PHOTO- MS-SFB-7-T
ELECTRIC Rear/side bracket M8 hexagon-socket-head bolt. (4 pcs. per set for emitter and receiver)
SENSORS
mounting bracket
M8 side mounting For side mounting. Allows the safety light curtain to be mounted at the side with one
AREA (Excluding MS-SFB-8-T
SENSORS bracket M8 hexagon-socket-head bolt. (4 pcs. per set for emitter and receiver)
SF4B-□G□<V2>)
SAFETY LIGHT Material: Cold rolled Can be used as either a rear mounting bracket MS-SFB-7-T or a side mounting
M8 rear/side mounting
CURTAINS / carbon steel (SPCC) MS-SFB-1-T2 bracket MS-SFB-8-T depending on mounting direction. (4 pcs. per set for emitter and
SAFETY bracket set
COMPONENTS receiver)
PRESSURE /
Standard mounting Used to mount the safety light curtain on the rear surface and side surface.
FLOW
SENSORS MS-SFB-1
360° mounting bracket (4 pcs. per set for emitter and receiver)
INDUCTIVE bracket M8 mounting Allows the safety light curtain to be mounted at the rear and side with one M8
PROXIMITY (Excluding MS-SFB-1-T
SENSORS bracket hexagon-socket-head bolt. (4 pcs. per set for emitter and receiver)
SF4B-□G□<V2>)
PARTICULAR Material: Used as the mounting bracket when changing over a previous safety light curtain with
USE
SENSORS Die-cast zinc alloy Pitch adapter bracket MS-SFB-4 a protective height of 200 mm 7.874 in or more to the SF4B series. It is installed using
two M5 hexagon-socket-head bolts. (4 pcs. per set for emitter and receiver)
SENSOR
OPTIONS * Safety light curtain Used as the mounting bracket when changing over a previous safety light curtain with
can revolve 360° M8 pitch adapter
MS-SFB-4-T a protective height of 200 mm 7.874 in or more to the SF4B series. It is installed using
SIMPLE horizontally. bracket
WIRE-SAVING one M8 hexagon-socket-head bolt. (4 pcs. per set for emitter and receiver)
UNITS
Dead zoneless mounting bracket
Mounting with no dead zone is possible so that the mounting bracket does not project
WIRE-SAVING (Excluding SF4B-□G□<V2>) MS-SFB-3
SYSTEMS past the protective height. (4 pcs. per set for emitter and receiver)
(Material: Die-cast zinc alloy)
MEASURE- Standard L mounting bracket
MENT
SENSORS (For SF4B-□G□<V2>) Mounting is possible behind or at the side of the safety light curtain.
MS-SF4BG-1
Material: Cold rolled carbon steel (SPCC) Mount with two M5 bolts or one M8 bolt. (4 pcs. per set for emitter and receiver)
STATIC
CONTROL (Trivalent chrome plated)
DEVICES
Dead zoneless mounting bracket
LASER (For SF4B-□G□<V2>)
MARKERS Allows safety light curtains to be installed closely together or in locations with
Material:
MS-SF4BG-3 installation restrictions due to equipment columns or jigs. (4 pcs. per set for emitter
Mounting bracket ...Cold rolled carbon steel (SPCC)
and receiver)
PLC (Trivalent chrome plated)
Supporting bracket ...PPS
HUMAN
MACHINE
INTERFACES M8 rear mounting bracket M8 side mounting bracket Standard mounting bracket M8 mounting bracket Pitch adapter bracket
ENERGY • MS-SFB-7-T • MS-SFB-8-T • MS-SFB-1 • MS-SFB-1-T • MS-SFB-4
MANAGEMENT
SOLUTIONS • MS-SFB-1-T2 • MS-SFB-1-T2
(Rear mounting) (Side mounting) Pitch adapter
FA bracket
COMPONENTS M8 rear mounting bracket M8 side mounting bracket MS-SFB-4
M8 mounting
MS-SFB-7-T MS-SFB-8-T M5 (length: 18 mm 0.709 in) bracket
MACHINE MS-SFB-1-T2 (Rear mounting) MS-SFB-1-T2 (Side mounting) M8 mounting hole (for center mounting) M5 (length: 18 mm 0.709 in)
VISION hexagon-socket-head bolt MS-SFB-1-T hexagon-socket-head bolt
SYSTEMS Standard mounting bracket (Accessory for MS-SFB-1-T) (Accessory for MS-SFB-4)
M5 (length: 18mm 0.709 in) MS-SFB-1
UV M5 (length: 18mm 0.709 in)
CURING hexagon-socket-head bolt
hexagon-socket-head bolt
( )
SYSTEMS M5 (length: 18 mm 0.709 in)
Accessory for MS-SFB-7-T
MS-SFB-1-T2
Safety light
( )
Accessory for MS-SFB-8-T
MS-SFB-1-T2 M5 mounting hole
hexagon-socket-head bolt
(Accessory for MS-SFB-1) Safety light
Safety light (for two-point mounting) Safety light
curtain curtain
curtain curtain
Safety light Sensing
Sensing Sensing Sensing Sensing
curtain surface
surface surface surface surface
Selection
Guide Four bracket set Four bracket set Four bracket set Four bracket set
Four bracket set
Safety Light Four M5 (length: 18 mm 0.709 in) Four M5 (length: 18 mm 0.709 in) Four M5 (length: 18 mm 0.709 in) Four M5 (length: 18 mm 0.709 in) Four M5 (length: 18 mm 0.709 in)
Curtains
hexagon-socket-head bolts are hexagon-socket-head bolts are hexagon-socket-head bolts are hexagon-socket-head bolts are hexagon-socket-head bolts are
Safety attached. attached. attached. attached.
Control Units attached.
Safety
Components
M8 pitch adapter bracket Dead zoneless mounting bracket Standard L mounting bracket Dead zoneless mounting bracket
• MS-SFB-4-T • MS-SFB-3 (For SF4B-□G□<V2>) (For SF4B-□G□<V2>)
SF4D • MS-SF4BG-1 • MS-SF4BG-3
SF4B/ When using M5 hexagon- When using M8
SF4B-G M8 pitch adapter bracket
M5 (length: 10 mm 0.394 in)
MS-SFB-4-T
hexagon-socket-head bolt (Accessory)
socket-head bolt hexagon bolt
SF4B-C
M5 (length: 18 mm 0.709 in)
(Rear mounting) (Rear mounting)
Dead zoneless mounting bracket MS-SFB-3 M5 mounting hole
SF4C hexagon-socket-head bolt
Spacer (Accessory for MS-SFB-3) Standard L M5 hexagon-
(Accessory for MS-SFB-4-T) mounting bracket socket-head bolt M8 hexagon bolt
BSF4-AH80 M5 (length: 25 mm 0.984 in) (Parchase separately.)
(MS-SF4BG-1) (Parchase separately.)
hexagon-socket-head bolt
SF2B (Accessory for MS-SFB-3)
M8 mounting hole
(For mounting in center)
SF2C Safety light
Safety light curtain Safety light
curtain Safety light curtain Safety light curtain
Definition of curtain Sensing
Sensing Heights Sensing surface Dead zoneless supporting bracket Dead zoneless supporting bracket
surface Accessory for dead zoneless Accessory for dead zoneless
mounting bracket mounting bracket
Four bracket set Four bracket set Dead zoneless mounting bracket Dead zoneless mounting bracket
Four M5 (length: 18 mm 0.709 in) Four M5 (length: 25 mm 0.984 in) Four bracket set MS-SF4BG-3 MS-SF4BG-3
hexagon-socket-head bolts are hexagon-socket-head bolts and Eight M5 (length: 10 mm 0.394 in)
attached. four spacers are attached. Four bracket set
hexagon-socket-head bolts are attached.
Twelve M5 (length: 8 mm 0.315 in) hexagon-socket-head bolts
and four nut slots are attached.
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
512
LASER
3 4 5 6 7 Mating cable / Extension cable / Cables for series connection Mating cable is not supplied with the safety light curtain. Be sure to order it separately. SENSORS
PHOTO-
ELECTRIC
SENSORS
Type Appearance Model No. Description (Note 1)
MICRO
PHOTO-
Length: 3 m 9.843 ft ELECTRIC
SFB-CCB3 Net weight: 370 g approx. (2 cables)
SENSORS
Discrete wire
AREA
Length: 7 m 22.966 ft SENSORS
SFB-CCB7 Net weight: 820 g approx. (2 cables) Used for connecting to the safety light curtain and to other
Bottom cap cable
PROXIMITY
SENSORS
3
OPTIONS
SFB-CC3
connector
SFB-CC10 Net weight: 1,200 g approx. (2 cables) Connector outer diameter: ø14 mm ø0.551 in max.
WIRE-SAVING
UNITS
Length: 3 m 9.843 ft
SFB-CCJ3E Net weight: 190 g approx. (1 cable)
WIRE-SAVING
SYSTEMS
Length: 10 m 32.808 ft Used for cable extension or connecting to the SF-C11 and
SFB-CCJ10E Net weight: 580 g approx. (1 cable) the SF-C14EX control unit. MEASURE-
MENT
One each for emitter and receiver SENSORS
Length: 3 m 9.843 ft Connector color: Gray (for emitter), Black (for receiver)
SFB-CCJ3D
4
Net weight: 210 g approx. (1 cable) Connector outer diameter: ø14 mm ø0.551 in max. STATIC
CONTROL
Length: 10 m 32.808 ft DEVICES
SFB-CCJ10D Net weight: 600 g approx. (1 cable)
LASER
Length: 3 m 9.843 ft
Bottom cap cable
MARKERS
Muting control components (12-core cable, with interference prevention wire)
SFB-CCB3-MU Used for connecting to the safety light curtain and to other
Discrete
HUMAN
Length: 0.5 m 1.640 ft MACHINE
extension cable or the SF-C12 control unit. INTERFACES
SFB-CB05-MU Net weight:
2 cables/set for emitter and receiver
110 g approx. (2 cables) ENERGY
Connector outer diameter: ø16 mm ø0.630 in max.
5
MANAGEMENT
SOLUTIONS
Length: 3 m 9.843 ft
With connectors on both ends With connector
SFB-CC3-MU Net weight: 430 g approx. (2 cables) Used for connecting to an extension cable or the SF-C13 FA
on one end
MACHINE
Length: 10 m 32.808 ft Connector outer diameter: ø16 mm ø0.630 in max. VISION
SFB-CC10-MU Net weight: 1,300 g approx. (2 cables)
SYSTEMS
Length: 3 m 9.843 ft UV
For receiver For emitter
SFB-CSL05 Net weight: 95 g approx. (2 cables) 2 cables/set for emitter and receiver (common for emitter and Safety
Components
Length: 1 m 3.281 ft receiver)
SFB-CSL1 Net weight: 150 g approx. (2 cables) Cable color: Gray (common for emitter and receiver)
Length: 5 m 16.404 ft SF4D
SFB-CSL5 Net weight: 630 g approx. (2 cables) SF4B/
Length: 0.5 m 1.640 ft SF4B-G
SF-C14EX
Length: 5 m 16.404 ft
SFB-CB5-EX Net weight: 620 g approx. (2 cables)
connectors on both ends SF4C
2 cables/set for emitter and receiver
Length: 10 m 32.808 ft Connector outer diameter: ø14 mm ø0.551 in max. BSF4-AH80
SFB-CB10-EX
3
FIBER
SENSORS
ORDER GUIDE
LASER
SENSORS Spare parts (Accessories for safety light curtain) Intermediate supporting bracket
PHOTO- • MS-SFB-2
ELECTRIC
SENSORS Designation Model No. Description <In case of rear mounting>
MICRO Safety light Intermediate supporting
PHOTO- curtain bracket
ELECTRIC Intermediate MS-SFB-2
SENSORS
supporting M5 hexagon-
AREA This bracket holds the safety light curtain at the middle. (2 pcs. socket-head bolt
bracket
SENSORS
(Excluding
MS-SFB-2 /set for emitter and receiver) Mounting is possible behind or at Purchase
SAFETY LIGHT the side of the safety light curtain. separately.
CURTAINS /
SF4B-□G□<V2>)
SAFETY (Note 1)
COMPONENTS Sensing surface
PRESSURE / Intermediate
FLOW
SENSORS supporting This bracket holds the safety light curtain at the middle. (2 pcs. <In case of side mounting>
Intermediate supporting
INDUCTIVE
bracket (Note 2) MS-SF4BG-2 /set for emitter and receiver) Mounting is possible behind or at M5 hexagon- bracket
PROXIMITY (For the side of the safety light curtain. socket-head bolt MS-SFB-2
SENSORS Purchase
SF4B-□G□<V2>)
separately.
PARTICULAR
USE Min. sensing object for regular checking (ø14 mm ø0.551 in), with Safety light curtain
SENSORS Test rod ø14 SF4B-TR14 finger protection type (min. sensing object ø14 mm ø0.551 in)
Sensing surface
SENSOR
OPTIONS Min. sensing object for regular checking (ø25 mm ø0.984 in), with
Test rod ø25 SF4B-TR25 hand protection type (min. sensing object ø25 mm ø0.984 in) • MS-SF4BG-2
SIMPLE
WIRE-SAVING
UNITS Notes: 1) The number of sets required varies depending on the product. <In case of rear mounting>
1 set: SF4B-F□<V2>.............................. 79 to 111 beam channels
WIRE-SAVING SF4B-H□<V2>.............................. 40 to 56 beam channels
SYSTEMS M5 hexagon-socket
SF4B-A□<V2>.............................. 20 to 28 beam channels -head bolt
MEASURE-
MENT
2 sets: SF4B-F127□<V2>
SF4B-H□<V2>.............................. 64 to 80 beam channels
(Purchase
separately. )
SENSORS
SF4B-A□<V2>.............................. 32 to 40 beam channels
STATIC
CONTROL 3 sets: SF4B-H□<V2>.............................. 88 to 96 beam channels
DEVICES SF4B-A□<V2>.............................. 44 to 48 beam channels <In case of side mounting>
LASER 2) The number of sets required varies depending on the product. M5 hexagon-socket
MARKERS -head bolt
1 set: SF4B-F□G□<V2>......................... 79 to 127 beam channels
PLC
SF4B-H□G□<V2>......................... 40 to 64 beam channels (Purchase
separately. )
SF4B-A□G□<V2>......................... 20 to 32 beam channels
2 set: SF4B-H□G□<V2>......................... 72 to 96 beam channels
HUMAN
MACHINE SF4B-A□G□<V2>......................... 36 to 48 beam channels
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Safety Light
Curtains
Safety
Control Units
Safety
Components
SF4D
SF4B/
SF4B-G
SF4B-C
SF4C
BSF4-AH80
SF2B
SF2C
Definition of
Sensing Heights
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
514
OPTIONS FIBER
SENSORS
PHOTO-
Designation Appearance Model No. Application cable Description ELECTRIC
SENSORS
MICRO
Use 8-core cable with connector to connect to the safety PHOTO-
Connector Bottom cap cable: SFB-CB□ light curtain. ELECTRIC
SENSORS
connection type SF-C11 Compatible with up to Control Category 4.
control unit Extension cable: SFB-CCJ10□ Interference prevention wires and muting function cannot AREA
SENSORS
be used.
SAFETY LIGHT
CURTAINS /
Use 12-core cable with connector to connect to the safety SAFETY
Bottom cap cable: COMPONENTS
light curtain.
Robust type SFB-CB05-MU PRESSURE /
control unit
SF-C12 Extension cable:
Compatible with up to Control Category 4. FLOW
Muting function cannot be used. SENSORS
SFB-CCJ10□-MU
Interference prevention wires can be used. INDUCTIVE
PROXIMITY
SENSORS
Use a discrete wire cable to connect to the safety light
Bottom cap cable:
curtain. PARTICULAR
Slim type SFB-CCB□(-MU) USE
control unit
SF-C13 Extension cable:
Compatible with up to Control Category 4. SENSORS
Interference prevention wires and muting function can be
SFB-CC□(-MU)
used. SENSOR
OPTIONS
Application The muting control function and emergency stop input SIMPLE
expansion unit for SF-C14EX Bottom cap cable: expand the applications of the safety light curtains. WIRE-SAVING
SF4B / SF4B-G series UNITS
SFB-CB□-EX Use exclusive cable to connect to the safety light curtain.
Handy-controller Compatible with up to Control Category 4. WIRE-SAVING
Extension cable: SFB-CCJ10□ The handy-controller SFB-HC (optional) cannot be used SYSTEMS
non-compatible SF-C14EX-01
type with SF‑C14EX‑01. MEASURE-
MENT
Note: Refer to SF-C10 series pages (p.663~) for the control units. SENSORS
STATIC
CONTROL
SF-C12 spare relay set DEVICES
LASER
A set of spare relays (2 safety relays and 1 removal tool) is available for the safety relay that is built into the SF-C12. MARKERS
Model No.: SF-C12-RY
PLC
• Recommended safety relay
HUMAN
MACHINE
Panasonic Corporation Type With LED indicator INTERFACES
SF relay, slim type
Model No. SFS3-L-DC24V SFS4-L-DC24V ENERGY
SF relay, slim type MANAGEMENT
SFS3-L-DC24V (AG1S132)
Item Part No. AG1S132 AG1S142 SOLUTIONS
SFS4-L-DC24V (AG1S142) Contact arrangement 3a1b 4a2b
FA
Rated nominal COMPONENTS
6 A / 250 V AC, 6 A / 30 V DC
switching capacity
Min. switching capacity 1 mA / 5 V DC MACHINE
VISION
DIN terminal block Coil rating 15 mA / 24 V DC 20.8 mA / 24 V DC SYSTEMS
SFS4-SFD (AG1S847) [4-poles type] Rated power UV
SFS6-SFD (AG1S867) [6-poles type] 360 mW 500 mW CURING
consumption SYSTEMS
Note: Contact Panasonic Corporation for details on the recommended Operation time 20 ms or less
products. Release time 20 ms or less
Ambient temperature –40 to +85 °C –40 to +185 °F (Humidity: 5 to 85 % RH)
Applicable standards UL/c-UL, TÜV, Korea’s S-mark
Selection
Guide
Safety Light
Safety control unit Curtains
Safety
Control Units
Creating safety circuits is easier than ever. Safety
Components
SF-C21
SF4D
SF4B/
Safety control unit SF4B-G
SF-C21
P.647~ SF4B-C
SF4C
BSF4-AH80
SF2B
SF2C
Definition of
Sensing Heights
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
515 Safety Light Curtain Type 4
FIBER
SENSORS
OPTIONS
Pigtailed type
Handy-controller
LASER In case of 8-core
SENSORS
Pigtailed type
PHOTO- Designation Appearance Model No. In case ofcable
8-core
ELECTRIC Bottom cap Extension cable
SENSORS
MICRO
PHOTO- Bottom cap cable 8-core 8-core Extension cable
ELECTRIC
SENSORS
In case of 12-core 8-core
FUNCTION
8-core8-core → 12-core
AREA 12-core → 8-core
Fix
ed
Floa bla
ting nki
Aux blan ng
SFB-HC
Lig iliary king
Handy-
ht out Co
SENSORS
con em put
trol issi de
on Mo
nit
Pr or
ote
FU Co ct
NC py
TIO
N
InBottom
case cap
of 12-core
CANCEL ENTER
Extension cable
12-core → 8-core 8-core → 12-core
NC
EL
CURTAINS /
EN
COMPONENTS
Bottom cap Adapter cable Adapter cable Extension cable
PRESSURE / * Includes 2 adapter cables cable (Accessory) (Accessory)
FLOW Handy-controller
SENSORS
INDUCTIVE
PROXIMITY Cable set for Cable type
SENSORS
cable type
SFC-WNC1 12-core → 8-core
PARTICULAR (Note)
USE
connection Cable type Cable set
+V 0V Adapter→cable
12-core 8-core
SENSORS
(Accessory) Not used
Synchronization -
Cable set 8-core 8-core
SENSOR handy-controller cannot be used with the SF4B-□-01<V2> (p.509~),
Note: A +V 0V Adapter cable
OPTIONS Synchronization + Not used
the SF4B-□-03<V2> (p.509) and the SF-C14EX-01 (p.514). Synchronization -
(Accessory)
8-core 8-core
FUNCTION
SIMPLE
WIRE-SAVING
ControlControl
Synchronization +
circuit circuit
UNITS
CANCEL ENTER
FUNCTION
WIRE-SAVING Handy-controller
SYSTEMS CANCEL ENTER
Terminal
MEASURE- block
MENT Handy-controller
SENSORS Terminal
block
STATIC Safety light curtain diagnosis software
CONTROL
DEVICES
Simply input the error number of the safety light curtain on the screen, and the section of
LASER
MARKERS
maintenance needed will be located and coping process will be displayed.
HUMAN
MACHINE
INTERFACES
FA Y-shaped connector
COMPONENTS
MACHINE
VISION Type Appearance Model No. Description
SYSTEMS
SF2C
Definition of
Sensing Heights Y-shaped connector
8 wires
5 wires
8 wires
Control unit SF-C13 Control unit SF-C13
Refer to the instruction manual for more details such as installation of Y-shaped connector, terminal wiring, and wiring example.
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
516
OPTIONS FIBER
SENSORS
LASER
Front protection cover (excluding SF4B-□G□<V2>) / Protection bar set (excluding SF4B-□G□<V2>) / Corner mirror SENSORS
Note: T
he model Nos. given above denote a single unit. 2 units are required for use in mounting to the emitter/receiver (excluding corner mirror). MEASURE-
MENT
Front protection cover Front protection Protection bar set Rear/side protection bar set SENSORS
cover STATIC
• FC-SFBH-□ • MC-SFBH-□ • MC-SFBH-□-T CONTROL
DEVICES
Protects sensing surface of the safety Note 1: Not available for Note 1: Not available for SF4B-□G□<V2>.
light curtain from flying objects such as SF4B-□G□<V2>. M5 hexagon- <Rear mounting> <Side mounting> LASER
MARKERS
welding spatter. socket-head bolt
with washers M5 hexagon-
The operating range reduces when the socket-head bolt
PLC
front protection cover is used.
Note: Not available for SF4B-□G□<V2>. HUMAN
MACHINE
INTERFACES
Material: Polycarbonate ENERGY
MANAGEMENT
Protection bar SOLUTIONS
M5 hexagon-
mounting socket-head bolt
bracket FA
COMPONENTS
Operating range Safety light curtain
MACHINE
VISION
SF4B-H□ SF4B-A□ SYSTEMS
FIBER
SENSORS
OPTIONS
LASER Side stopper
SENSORS Front protection cover (For SF4B-□G□<V2>) (Accessory for a front protection cover) Top stopper
(Accessory for a front protection cover)
PHOTO- Designation Front protection cover
ELECTRIC Applicable Front protection
SENSORS
beam axes cover
MICRO
PHOTO-
ELECTRIC Finger Hand Arm / foot Model No.
SENSORS
AREA
23 12 6 FC-SF4BG-H12 Bottom stopper
SENSORS Accessory for a
31 16 8 FC-SF4BG-H16 front protection cover
SAFETY LIGHT
CURTAINS / 39 20 10 FC-SF4BG-H20
SAFETY Bottom cap cable
COMPONENTS 47 24 12 FC-SF4BG-H24
PRESSURE /
FLOW
55 28 14 FC-SF4BG-H28 Material: Front protection cover ... Polycarbonate
SENSORS Top / Side / Bottom stopper ... Stainless steel (SUS304)
63 32 16 FC-SF4BG-H32
INDUCTIVE
PROXIMITY 71 36 18 FC-SF4BG-H36 Operating range
SENSORS
79 40 20 FC-SF4BG-H40
PARTICULAR
USE 95 48 24 FC-SF4BG-H48 SF4B-H□G□<V2> SF4B-A□G<V2>
SENSORS
111 56 28 FC-SF4BG-H56 SF4B-F□G<V2> 12 to 64 beam 72 to 96 beam 6 to 32 beam 36 to 48 beam
SENSOR
OPTIONS 127 64 32 FC-SF4BG-H64 axes type axes type axes type axes type
SIMPLE
– 72 36 FC-SF4BG-H72 Only emitter installed
WIRE-SAVING 0.3 to 6 m 0.3 to 7.5 m 0.3 to 6 m 0.3 to 7.5 m 0.3 to 6 m
UNITS – 80 40 FC-SF4BG-H80 0.984 to 19.685 ft 0.984 to 24.606 ft 0.984 to 19.685 ft 0.984 to 24.606 ft 0.984 to 19.685 ft
– 88 44 FC-SF4BG-H88 Only receiver installed
WIRE-SAVING
SYSTEMS – 96 48 FC-SF4BG-H96 Both emitter and 0.3 to 5.5 m 0.3 to 7 m 0.3 to 5.5 m 0.3 to 7 m 0.3 to 5.5 m
receiver installed 0.984 to 18.045 ft 0.984 to 22.966 ft 0.984 to 18.045 ft 0.984 to 22.966 ft 0.984 to 18.045 ft
MEASURE- Note: The model Nos. given above denote a single unit,
MENT Note: The operating range is the possible setting distance between the emitter and the receiver.
SENSORS not a pair of units. 2 units are required for use in
mounting to the emitter/receiver.
STATIC
CONTROL
DEVICES
Others
LASER
MARKERS
UV
CURING
SYSTEMS
Laser alignment tool Laser alignment tool Caution tape
(Excluding SF4B-□G□<V2>) (For SF4B-□G□<V2>) ・SF-TP-BG10
• SF-LAT-2N ・SF-LAT-4BG
Selection
Guide
Safety Light
Curtains
Safety
Control Units
Safety
Components
SF4D
SF4B/
SF4B-G
SF4B-C
SF4C
BSF4-AH80
SF2B
SF2C
Definition of
Sensing Heights
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
518
OPTIONS FIBER
SENSORS
LASER
Large display unit for safety light SENSORS
Designation Model No. Description curtain PHOTO-
ELECTRIC
• SF-IND-2 M5 hexagon-socket- SENSORS
With the auxiliary output of the safety light curtain, the operation is head bolt
MICRO
(length: 10 mm PHOTO-
easily observable from various directions. 0.394 in or more) ELECTRIC
SENSORS
Specifications Purchase
separately. AREA
• Supply voltage: 24 V DC ±15 % SENSORS
• Current consumption: 12 mA or less
• Indicators: Orange LED (8 pcs. used) SAFETY LIGHT
CURTAINS /
[Light up when external contact is ON] SAFETY
• Ambient temperature: –10 to +55 °C +14 to +131 °F COMPONENTS
(No dew condensation or icing allowed) PRESSURE /
FLOW
• Material: POM (Enclosure) SENSORS
Polycarbonate (Cover)
INDUCTIVE
Cold rolled carbon steel (SPCC) (Bracket) Attaches to top of safety light curtain. PROXIMITY
• Cable: 0.3 mm2 2-core cabtyre cable, 3 m 9.843 ft long Tighten together the mounting bracket SENSORS
• Weight: 70 g approx. (including bracket) provided with the safety light curtain PARTICULAR
MS-SFB-1/4, MS-SFBG-1 and the attached USE
I/O circuit diagrams mounting bracket of SF-IND-2.
SENSORS
ENERGY
MANAGEMENT
SOLUTIONS
Introduction to Panasonic Industrial Devices SUNX sensors that can be used as muting sensors
FA
Compact Photoelectric Sensor Ultra-slim Photoelectric Sensor U-shaped Micro Photoelectric Sensor Rectangular-shaped Inductive Proximity Sensor COMPONENTS
CX-400 SERIES Ver.2 EX-10 SERIES Ver.2 PM-25/45/65 SERIES GX-F/H SERIES MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
• World standard size • 3.5 mm 0.138 in thickness • Three protection circuits • Industry longest in stable Guide
Safety Light
• Wide variation • Long sensing range: 1 m 3.281 ft standard on all models sensing range Curtains
(thru-beam type: EX-19) • Ample beam emitting / • 10 times the durability Safety
receiving distance of 6 mm Control Units
* The EX-20 series that is (Compared to previous models)
Safety
compatible with M3 mounting 0.236 in • IP68G rating Components
screws is also available. • Easy to mount with M3 screws
P.245~ P.279~ P.395~ P.785~ SF4D
SF4B/
SF4B-G
SF4B-C
SF4C
BSF4-AH80
SF2B
SF2C
Definition of
Sensing Heights
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
519 Safety Light Curtain Type 4
FIBER
SENSORS
SPECIFICATIONS
LASER
SENSORS Safety light curtain individual specifications
PHOTO-
ELECTRIC
SF4B-F□(G)<V2>
SENSORS
MICRO Type Min. sensing object ø14 mm ø0.551 in type (10 mm 0.394 in beam pitch)
PHOTO-
ELECTRIC
SENSORS
Item Model No. SF4B-F23□<V2> SF4B-F23G<V2> SF4B-F31□<V2> SF4B-F31G<V2> SF4B-F39□<V2> SF4B-F39G<V2> SF4B-F47□<V2> SF4B-F47G<V2> SF4B-F55□<V2> SF4B-F55G<V2>
AREA Number of beam channels 23 31 39 47 55
SENSORS
230 mm 244 mm 310 mm 324 mm 390 mm 404 mm 470 mm 484 mm 550 mm 564 mm
SAFETY LIGHT Protective height (Note 2)
CURTAINS / 9.055 in 9.606 in 12.205 in 12.756 in 15.354 in 15.906 in 18.504 in 19.055 in 21.654 in 22.205 in
SAFETY
COMPONENTS China Press compliant 220 mm 300 mm 380 mm 460 mm 540 mm
PRESSURE / (GB/T 4584) 8.661 in 11.811 in 14.960 in 18.110 in 21.260 in
FLOW
SENSORS
Current consumption Emitter: 80 mA or less, Receiver: 120 mA or less Emitter: 100 mA or less, Receiver: 160 mA or less
INDUCTIVE
PROXIMITY PFHD 2.4 × 10 –9
2.8 × 10 –9
3.2 × 10 –9
3.6 × 10–9 4.0 × 10–9
SENSORS
SIMPLE
Type Min. sensing object ø14 mm ø0.551 in type (10 mm 0.394 in beam pitch)
WIRE-SAVING
UNITS Item Model No. SF4B-F63□<V2> SF4B-F63G<V2> SF4B-F71□<V2> SF4B-F71G<V2> SF4B-F79□<V2> SF4B-F79G<V2> SF4B-F95□<V2> SF4B-F95G<V2>
WIRE-SAVING Number of beam channels 63 71 79 95
SYSTEMS
630 mm 644 mm 710 mm 724 mm 790 mm 804 mm 950 mm 964 mm
MEASURE- Protective height (Note 2)
MENT 24.803 in 25.354 in 27.953 in 28.504 in 31.102 in 31.654 in 37.402 in 37.953 in
SENSORS
China Press compliant 620 mm 700 mm 780 mm 940 mm
STATIC
CONTROL (GB/T 4584) 24.409 in 27.559 in 30.708 in 37.007 in
DEVICES
Current consumption Emitter: 100 mA or less, Receiver: 160 mA or less Emitter: 115 mA or less, Receiver: 190 mA or less
LASER
MARKERS PFHD 4.4 × 10–9 4.8 × 10–9 5.2 × 10–9 6.0 × 10–9
MTTFD 100 years or more
PLC
Net weight 1,260 g 2,800 g 1,420 g 3,200 g 1,570 g 3,400 g 1,870 g 4,200 g
HUMAN (Total of emitter and receiver) approx. approx. approx. approx. approx. approx. approx. approx.
MACHINE
INTERFACES
ENERGY Type Min. sensing object ø14 mm ø0.551 in type (10 mm 0.394 in beam pitch)
MANAGEMENT
SOLUTIONS
Item Model No. SF4B-F111□<V2> SF4B-F111G<V2> SF4B-F127□<V2> SF4B-F127G<V2>
FA Number of beam channels 111 127
COMPONENTS
1,110 mm 1,124 mm 1,270 mm 1,284 mm
MACHINE Protective height (Note 2)
VISION 43.701 in 44.252 in 50.000 in 50.551 in
SYSTEMS
SF4C
BSF4-AH80
SF2B
SF2C
Definition of
Sensing Heights
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
520
SPECIFICATIONS FIBER
SENSORS
LASER
SF4B-H□(G□)<V2> SENSORS
Type Min. sensing object ø25 mm ø0.984 in type (20 mm 0.787 in beam pitch) PHOTO-
ELECTRIC
SENSORS
Item Model No. SF4B-H12□<V2> SF4B-H12G□<V2> SF4B-H16□<V2> SF4B-H16G□<V2> SF4B-H20□<V2> SF4B-H20G□<V2> SF4B-H24□<V2> SF4B-H24G□<V2> SF4B-H28□<V2> SF4B-H28G□<V2>
MICRO
PHOTO-
Number of beam channels 12 16 20 24 28 ELECTRIC
SENSORS
230 mm 244 mm 310 mm 324 mm 390 mm 404 mm 470 mm 484 mm 550 mm 564 mm
Protective height (Note 2) AREA
9.055 in 9.606 in 12.205 in 12.756 in 15.354 in 15.906 in 18.504 in 19.055 in 21.654 in 22.205 in SENSORS
China Press compliant 220 mm 300 mm 380 mm 460 mm 540 mm SAFETY LIGHT
CURTAINS /
(GB/T 4584) 8.661 in 11.811 in 14.960 in 18.110 in 21.260 in SAFETY
COMPONENTS
Current consumption Emitter: 70 mA or less, Receiver: 95 mA or less Emitter: 80 mA or less, Receiver: 115 mA or less PRESSURE /
FLOW
PFHD 1.8 × 10 –9
2.0 × 10 –9
2.2 × 10 –9
2.4 × 10 –9
2.6 × 10 –9 SENSORS
INDUCTIVE
MTTFD 100 years or more PROXIMITY
SENSORS
Net weight 510 g 980 g 660 g 1,340 g 810 g 1,700 g 960 g 2,000 g 1,110 g 2,400 g
PARTICULAR
(Total of emitter and receiver) approx. approx. approx. approx. approx. approx. approx. approx. approx. approx. USE
SENSORS
Type Min. sensing object ø25 mm ø0.984 in type (20 mm 0.787 in beam pitch) SENSOR
OPTIONS
Item Model No. SF4B-H32□<V2> SF4B-H32G□<V2> SF4B-H36□<V2> SF4B-H36G□<V2> SF4B-H40□<V2> SF4B-H40G□<V2> SF4B-H48□<V2> SF4B-H48G□<V2> SF4B-H56□<V2> SF4B-H56G□<V2>
SIMPLE
Number of beam channels 32 36 40 48 56 WIRE-SAVING
UNITS
630 mm 644 mm 710 mm 724 mm 790 mm 804 mm 950 mm 964 mm 1,110 mm 1,124 mm WIRE-SAVING
Protective height (Note 2)
24.803 in 25.354 in 27.953 in 28.504 in 31.102 in 31.654 in 37.402 in 37.953 in 43.701 in 44.252 in SYSTEMS
STATIC
Emitter: 100 mA or less, CONTROL
Current consumption Emitter: 80 mA or less, Receiver: 115 mA or less Emitter: 90 mA or less, Receiver: 140 mA or less
Receiver: 160 mA or less DEVICES
PFHD 2.8 × 10–9 3.0 × 10–9 3.2 × 10–9 3.6 × 10–9 4.0 × 10–9 LASER
MARKERS
MTTFD 100 years or more
Net weight PLC
1,260 g 2,800 g 1,420 g 3,200 g 1,570 g 3,400 g 1,870 g 4,200 g 2,170 g 5,000 g
(Total of emitter and receiver) approx. approx. approx. approx. approx. approx. approx. approx. approx. approx.
HUMAN
MACHINE
INTERFACES
Type Min. sensing object ø25 mm ø0.984 in type (20 mm 0.787 in beam pitch)
ENERGY
Item Model No. SF4B-H64□<V2> SF4B-H64G<V2> SF4B-H72□<V2> SF4B-H72G<V2> SF4B-H80□<V2> SF4B-H80G<V2> SF4B-H88□<V2> SF4B-H88G<V2> SF4B-H96□<V2> SF4B-H96G□<V2> MANAGEMENT
SOLUTIONS
Number of beam channels 64 72 80 88 96
FA
COMPONENTS
1,270 mm 1,284 mm 1,430 mm 1,444 mm 1,590 mm 1,604 mm 1,750 mm 1,764 mm 1,910 mm 1,924 mm
Protective height (Note 2)
50.000 in 50.551 in 56.299 in 56.850 in 62.598 in 63.150 in 68.898 in 69.449 in 75.197 in 75.748 in MACHINE
VISION
SYSTEMS
China Press compliant 1,260 mm 1,420 mm 1,580 mm 1,740 mm 1,900 mm
(GB/T 4584) 49.606 in 55.905 in 62.205 in 68.503 in 74.803 in UV
CURING
SYSTEMS
Emitter: 100 mA or less,
Current consumption Emitter: 110 mA or less, Receiver: 180 mA or less Emitter: 120 mA or less, Receiver: 200 mA or less
Receiver: 160 mA or less
PFHD 4.4 × 10–9 4.8 × 10–9 5.2 × 10–9 5.6 × 10–9 6.0 × 10–9
MTTFD 100 years or more
Selection
Net weight 2,470 g 5,600 g 2,770 g 6,400 g 3,070 g 7,000 g 3,370 g 7,800 g 3,670 g 8,400 g Guide
(Total of emitter and receiver) approx. approx. approx. approx. approx. approx. approx. approx. approx. approx. Safety Light
Curtains
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. The model No. Safety
Control Units
with “G“ is a robust type. Safety
PFHD: Probability of dangerous failure per hour, MTTFD: Mean time to dangerous failure (in years) Components
2) In the case of “When used as safety device for presses in China”, the distance between the center of the first beam axis and the center of the last beam
axis of the device becomes the protective height. For details, refer to “Definition of sensing heights” (p.645).
SF4D
SF4B/
SF4B-G
SF4B-C
SF4C
BSF4-AH80
SF2B
SF2C
Definition of
Sensing Heights
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
521 Safety Light Curtain Type 4
FIBER
SENSORS
SPECIFICATIONS
LASER
SENSORS SF4B-A□(G)<V2>
PHOTO- Type Min. sensing object ø45 mm ø1.772 in type (40 mm 1.575 in beam pitch)
ELECTRIC
SENSORS
Item Model No. SF4B-A6□<V2> SF4B-A6G<V2> SF4B-A8□<V2> SF4B-A8G<V2> SF4B-A10□<V2> SF4B-A10G<V2> SF4B-A12□<V2> SF4B-A12G<V2> SF4B-A14□<V2> SF4B-A14G<V2>
MICRO
PHOTO- 6 8 10 12 14
ELECTRIC Number of beam channels
SENSORS
230 mm 244 mm 310 mm 324 mm 390 mm 404 mm 470 mm 484 mm 550 mm 564 mm
AREA Protective height (Note 2)
SENSORS 9.055 in 9.606 in 12.205 in 12.756 in 15.354 in 15.906 in 18.504 in 19.055 in 21.654 in 22.205 in
SAFETY LIGHT China Press compliant 200 mm 280 mm 360 mm 440 mm 520 mm
CURTAINS /
SAFETY (GB/T 4584) 7.874 in 11.024 in 14.173 in 17.323 in 20.472 in
COMPONENTS
PRESSURE / Current consumption Emitter: 65 mA or less, Receiver: 85 mA or less Emitter: 70 mA or less, Receiver: 95 mA or less
FLOW
SENSORS PFHD 1.5 × 10 –9
1.6 × 10 –9
1.7 × 10 –9
1.8 × 10–9 1.9 × 10–9
INDUCTIVE
PROXIMITY MTTFD 100 years or more
SENSORS
Net weight 510 g 980 g 660 g 1,340 g 810 g 1,700 g 960 g 2,000 g 1,110 g 2,400 g
PARTICULAR
USE (Total of emitter and receiver) approx. approx. approx. approx. approx. approx. approx. approx. approx. approx.
SENSORS
SENSOR Type Min. sensing object ø45 mm ø1.772 in type (40 mm 1.575 in beam pitch)
OPTIONS
Item Model No. SF4B-A16□<V2> SF4B-A16G<V2> SF4B-A18□<V2> SF4B-A18G<V2> SF4B-A20□<V2> SF4B-A20G<V2> SF4B-A24□<V2> SF4B-A24G<V2> SF4B-A28□<V2> SF4B-A28G<V2>
SIMPLE
WIRE-SAVING Number of beam channels 16 18 20 24 28
UNITS
WIRE-SAVING 630 mm 644 mm 710 mm 724 mm 790 mm 804 mm 950 mm 964 mm 1,110 mm 1,124 mm
Protective height (Note 2)
SYSTEMS 24.803 in 25.354 in 27.953 in 28.504 in 31.102 in 31.654 in 37.402 in 37.953 in 43.701 in 44.252 in
MEASURE- China Press compliant 600 mm 680 mm 760 mm 920 mm 1,080 mm
MENT
SENSORS (GB/T 4584) 23.622 in 26.772 in 29.921 in 36.220 in 42.520 in
STATIC
CONTROL Emitter: 80 mA or less,
Current consumption Emitter: 70 mA or less, Receiver: 95 mA or less Emitter: 75 mA or less, Receiver: 105 mA or less
DEVICES Receiver: 120 mA or less
LASER PFHD 2.0 × 10–9 2.1 × 10–9 2.2 × 10–9 2.4 × 10–9 2.6 × 10–9
MARKERS
MTTFD 100 years or more
PLC Net weight 1,260 g 2,800 g 1,420 g 3,200 g 1,570 g 3,400 g 1,870 g 4,200 g 2,170 g 5,000 g
(Total of emitter and receiver) approx. approx. approx. approx. approx. approx. approx. approx. approx. approx.
HUMAN
MACHINE
INTERFACES
Type Min. sensing object ø45 mm ø1.772 in type (40 mm 1.575 in beam pitch)
ENERGY
MANAGEMENT
SOLUTIONS Item Model No. SF4B-A32□<V2> SF4B-A32G<V2> SF4B-A36□<V2> SF4B-A36G<V2> SF4B-A40□<V2> SF4B-A40G<V2> SF4B-A44□<V2> SF4B-A44G<V2> SF4B-A48□<V2> SF4B-A48G<V2>
Number of beam channels 32 36 40 44 48
FA
COMPONENTS
1,270 mm 1,284 mm 1,430 mm 1,444 mm 1,590 mm 1,604 mm 1,750 mm 1,764 mm 1,910 mm 1,924 mm
Protective height (Note 2)
MACHINE 50.000 in 50.551 in 56.299 in 56.850 in 62.598 in 63.150 in 68.898 in 69.449 in 75.197 in 75.748 in
VISION
SYSTEMS
China Press compliant 1,240 mm 1,400 mm 1,560 mm 1,720 mm 1,880 mm
UV (GB/T 4584) 48.819 in 55.118 in 61.417 in 67.716 in 74.016 in
CURING
SYSTEMS
Emitter: 80 mA or less,
Current consumption Emitter: 85 mA or less, Receiver: 130 mA or less Emitter: 95 mA or less, Receiver: 140 mA or less
Receiver: 120 mA or less
PFHD 2.8 × 10 –9
3.0 × 10 –9
3.2 × 10 –9
3.4 × 10–9 3.6 × 10–9
MTTFD 100 years or more
Selection
Guide Net weight 2,470 g 5,600 g 2,770 g 6,400 g 3,070 g 7,000 g 3,370 g 7,800 g 3,670 g 8,400 g
Safety Light (Total of emitter and receiver) approx. approx. approx. approx. approx. approx. approx. approx. approx. approx.
Curtains
Safety Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. The model No.
Control Units
with “G“ is a robust type.
Safety
Components PFHD: Probability of dangerous failure per hour, MTTFD: Mean time to dangerous failure (in years)
2) In the case of “When used as safety device for presses in China”, the distance between the center of the first beam axis and the center of the last beam
axis of the device becomes the protective height. For details, refer to “Definition of sensing heights” (p.645).
SF4D
SF4B/
SF4B-G Safety light curtain common specifications
SF4B-C
Type Min. sensing object ø14 mm ø0.551 in type Min. sensing object ø25 mm ø0.984 in type Min. sensing object ø45 mm ø1.772 in type
SF4C
Model No. SF4B-F□(G)<V2> SF4B-H□(G□)<V2> SF4B-A□(G)<V2>
BSF4-AH80
SFB-HC non-compatible SF4B-F□-01<V2> SF4B-H□-01<V2> SF4B-A□-01<V2>
SF2B
Item Korean press compliant SF4B-F□-03<V2> SF4B-H□-03<V2>
SF2C International standard IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)
Applicable standards
Definition of Japan
Sensing Heights JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3)
Europe (EU) EN 61496-1 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 61508-1 to 7 (SIL3), EN 55011, EN 50178, EN 61000-6-2
(Note 2)
ANSI/UL 61496-1/2 (Type 4), ANSI/UL 508, UL 1998 (Class 2), CAN/CSA 61496-1/2 (Type 4), CAN/CSA C22.2 No.14,
North America
OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06
South Korea (S-Mark) S1-G-35-2005, S2-W-11-2003 (SF4B-□<V2> only)
China (GB) GB/T 4584 (excluding SF4B-□-03<V2>)
CE marking directive compliance Machinery Directive, EMC Directive, RoHS Directive
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
522
SPECIFICATIONS FIBER
SENSORS
LASER
Safety light curtain common specifications SENSORS
Type Min. sensing object ø14 mm ø0.551 in type Min. sensing object ø25 mm ø0.984 in type Min. sensing object ø45 mm ø1.772 in type PHOTO-
ELECTRIC
SENSORS
Model No. SF4B-F□(G)<V2> SF4B-H□(G□)<V2> SF4B-A□(G)<V2>
MICRO
PHOTO-
SFB-HC non-compatible SF4B-F□-01<V2> SF4B-H□-01<V2> SF4B-A□-01<V2> ELECTRIC
SENSORS
Item Korean press compliant SF4B-F□-03<V2> SF4B-H□-03<V2>
AREA
12 to 64 beam channels type: 0.3 to 9 m 0.984 to 29.528 ft 6 to 32 beam channels type: 0.3 to 9 m 0.984 to 29.528 ft SENSORS
Operating range (Note 3) 0.3 to 7 m 0.984 to 22.966 ft
72 to 96 beam channels type: 0.3 to 7 m 0.984 to 22.966 ft 36 to 48 beam channels type: 0.3 to 7 m 0.984 to 22.966 ft SAFETY LIGHT
CURTAINS /
Min. sensing object (Note 4) ø14 mm ø0.551 in opaque object ø25 mm ø0.984 in opaque object ø45 mm ø1.772 in opaque object SAFETY
COMPONENTS
Effective aperture angle ±2.5° or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / ANSI/UL 61496-2)] PRESSURE /
FLOW
Supply voltage 24 V DC ±10 % Ripple P-P 10 % or less SENSORS
PNP open-collector transistor / NPN open-collector transistor (switching method) INDUCTIVE
• When selecting PNP output: Max. source current 200 mA, When selecting NPN output: Max. sink current 200 mA PROXIMITY
SENSORS
Control outputs • Applied voltage: same as supply voltage When selecting PNP output: between the control output and +V,
(OSSD 1, OSSD 2) When selecting NPN output: between the control output and 0 V PARTICULAR
USE
• Residual voltage: 2.5 V or less (When selecting PNP output: source current 200 mA, when selecting NPN output: sink current 200 mA) SENSORS
(when using 20 m 65.617 ft length cable)
SENSOR
ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any OPTIONS
Operation mode
malfunction in the safety light curtain or the synchronization signal)(Note 5,6)
SIMPLE
Protection circuit Incorporated WIRE-SAVING
UNITS
Response time OFF response: 14 ms or less, ON response: 80 to 90 ms
WIRE-SAVING
PNP open-collector transistor / NPN open-collector transistor (switching method) SYSTEMS
• When selecting PNP output: Max. source current 60 mA, When selecting NPN output: Max. sink current 60 mA
Auxiliary output • Applied voltage: same as supply voltage When selecting PNP output: between the auxiliary output and +V, MEASURE-
MENT
(Non-safety output) When selecting NPN output: between the auxiliary output and 0 V SENSORS
• Residual voltage: 2.5 V or less (When selecting PNP output: source current 60 mA, when selecting NPN output: sink current 60 mA)
STATIC
(when using 20 m 65.617 ft length cable) CONTROL
DEVICES
OFF when control outputs are ON, ON when control outputs are OFF [Factory setting, operating mode can be changed using
Operation mode
the SFB-HC (optional) handy-controller]. LASER
MARKERS
Protection circuit Incorporated
Responce time OFF replay: 34 ms or less, ON replay 110 ms or less PLC
Interference prevention function Incorporated (Note 7) (Available only when in series connection for SF4B-□-03<V2>)
HUMAN
Emission halt function / Interlock function Incorporated / Incorporated [Manual reset / Auto reset (Note 8)] MACHINE
INTERFACES
External device monitoring function Incorporated
ENERGY
Override function / Muting function Incorporated (Note 7) (excluding SF4B-□-03<V2>) / Incorporated (Note 7) (excluding SF4B-□-03<V2>) MANAGEMENT
SOLUTIONS
Fixed blanking, floating blanking, auxiliary output switching, interlock setting changing, external relay monitor setting changing,
Optional functions (Note 9) FA
muting setting changing, protecting, light emitting amount control COMPONENTS
Degree of protection IP67 / IP65 (IEC)
Environmental resistance
MACHINE
Ambient temperature –10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –25 to +70 °C –13 to +158 °F VISION
SYSTEMS
Ambient humidity 30 to 85 % RH, Storage: 30 to 95 % RH UV
CURING
Ambient illuminance Incandescent light: 3,500 ℓx or less at the light-receiving face SYSTEMS
Dielectric strength voltage 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each Selection
Guide
Emitting element Infrared LED (Peak emission wavelength: 870 nm 0.034 mil)
Safety Light
Material Enclosure: Aluminium, Upper and lower edges: Iron, Sensing surface: Polycarbonate and Polyester resin, Cap: PBT Curtains
Safety
Connecting method / Cable length Connector / Total length up to 50 m 164.042 ft is possible for both emitter and receiver, with optional mating cables (Note 10) Control Units
MS-SFB-2 (Intermediate supporting bracket): (Note 11) MS-SFB-2 (Intermediate supporting bracket): (Note 11) MS-SFB-2 Safety
Components
Accessories MS-SF4BG-2 (Intermediate supporting bracket): (Note 12) MS-SF4BG-2 (Intermediate supporting bracket): (Note 12) (Intermediate supporting bracket): (Note 11)
SF4B-TR14 (Test rod): 1 No. SF4B-TR25 (Test rod): 1 No. MS-SF4BG-2 (Intermediate supporting bracket): (Note 12)
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. SF4D
Model Nos. having the suffix “G” are robust type. SF4B/
2) PLe SIL3 compliant from production in August 2009. SF4B-G
3) T he operating range is the possible setting distance between the emitter and the receiver.
SF4B-C
4) When the floating blanking function is used, the size of the min. sensing object is changed. For details, refer to “Safety distance” (p.532).
5) The outputs are not “OFF” when muting function is active even if the beam channel is interruped. SF4C
6) In case the blanking function is valid, the operation mode is changed. For details, refer to “Safety distance” (p.532).
7) In case of using this function, please use 12-core cable. BSF4-AH80
8) The manual reset and auto reset are possible to be switched depending on the wiring status. SF2B
9) In case of using optional function, the handy-controller (SFB-HC) (optional) is required. However, a handy-controller cannot be used with the
SF4B-□-01<V2>, SF4B-□-03<V2> and the SF-C14EX-01. SF2C
10) The cable can be extended within 30 m 98.425 ft (for emitter/receiver) when two safety light curtains are connected in series, within 20 m 65.617 ft when Definition of
three safety light curtains are connected in series. Furthermore, when the muting lamp is used, the cable can be extended within 40 m 131.234 ft (for Sensing Heights
emitter/receiver).
11) The intermediate supporting bracket (MS-SFB-2) is enclosed with the following models. The number of sets required varies depending on the product.
1 set: SF4B-F□<V2>............... 79 to 111 beam channels, SF4B-H□<V2>.....................40 to 56 beam channels,
SF4B-A□<V2>.............. 20 to 28 beam channels
2 sets: SF4B-F127<V2>, SF4B-H□ <V2>...64 to 80 beam channels, SF4B-A□<V2>....32 to 40 beam channels
3 sets: SF4B-H□<V2>.............. 88 to 96 beam channels, SF4B-A□<V2>.......................44 to 48 beam channels
12) The intermediate supporting bracket (MS-SF4BG-2) is enclosed with the following models.
1 set: SF4B-F□G<V2>............ 79 to 127 beam channels, SF4B-H□G□<V2>................40 to 64 beam channels
SF4B-A□G<V2>............ 20 to 32 beam channels
2 sets: SF4B-H□G□<V2>......... 72 to 96 beam channels, SF4B-A□G<V2>....................36 to 48 beam channels
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
523 Safety Light Curtain Type 4
FIBER
SENSORS
SPECIFICATIONS
LASER
SENSORS Control units
PHOTO- Model No.
SF-C11 (Note 2) SF-C12 SF-C13 (Note 2)
ELECTRIC
SENSORS
Item
MICRO
Connectable safety light curtains SF4B / SF4B-G / SF4D / SF2B series SF4B / SF4B-G series Safety light curtains manufactured by Panasonic Industrial Devices SUNX
PHOTO- Applicable standards IEC 61496-1, EN 61496-1, ANSI/UL 61496-1, CAN/CSA 61496-1, JIS B 9704-1, etc.
ELECTRIC
SENSORS CE marking directive compliance Machinery Directive, Low Voltage (SF-C11/C13 only) Directive, EMC Directive, RoHS Directive
AREA Control category ISO 13849-1 (EN ISO 13849-1, JIS B 9705-1) compliance up to Category 4, PLe standards
SENSORS
Supply voltage / Current consumption 24 V DC ±10 % Ripple P-P 10 % or less / 100 mA or less (without safety light curtain)
SAFETY LIGHT
CURTAINS / Fuse (rating) Built-in electronic fuse, Triggering current: 0.5 A or more, Reset after power down
SAFETY
COMPONENTS Safety output NO contact × 3 (13-14, 23-24, 33-34) NO contact × 2 (13-14, 23-24) NO contact × 3 (13-14, 23-24, 33-34)
PRESSURE / Utilization category AC-15, DC-13 (IEC 60947-5-1)
FLOW
SENSORS 30 V DC / 6 A, 230 V AC / 6 A, resistive load 24 V DC / 1 A, resistive load 30 V DC / 4 A, 230 V AC / 4 A, resistive load
Rated operation voltage (Ue) /
(For inductive load, during contact protection) (For inductive load, during contact protection) (For inductive load, during contact protection)
INDUCTIVE Rated operation current (le)
PROXIMITY Min. applicable load: 10 mA (at 24 V DC) (Note 3) Min. applicable load: 15 mA (at 24 V DC) Min. applicable load: 10 mA (at 24 V DC) (Note 3)
SENSORS
Contact resistance 100 mΩ or less (initial value) 50 mΩ or less (initial value) 100 mΩ or less (initial value)
PARTICULAR
USE Contact protection fuse rating 6 A (slow blow) 3 A (slow blow) 4 A (slow blow)
SENSORS
Pick-up delay (Auto reset/Manual reset) 80 ms or less / 90 ms or less 30 ms or less / 30 ms or less 80 ms or less / 90 ms or less
SENSOR Response time 10 ms or less 14 ms or less 10 ms or less
OPTIONS
Auxiliary output Safety relay contact (NC contact) ×1 (41-42) (Related to safety output) Safety relay contact (NC contact) × 1 (31-32) (Related to safety output) Safety relay contact (NC contact) × 1 (41-42) (Related to safety output)
SIMPLE Rated operation voltage/current 24 V DC / 2 A, Min. applicable load: 10 mA (at 24 V DC) 30 V DC / 3 A, Min. applicable load: 15 mA (at 24 V DC) 24 V DC / 2 A, Min. applicable load: 10 mA (at 24 V DC)
WIRE-SAVING
UNITS Contact protection fuse rating 2 A (slow blow) 3 A (slow blow) 2 A (slow blow)
Semiconductor auxiliary output <Minus ground (Setting for PNP)> <Plus ground (Setting for NPN)> –
WIRE-SAVING PNP open‑collector transistor
SYSTEMS (AUX) PNP open-collector transistor NPN open-collector transistor
Output operation Related to auxiliary output of safety light curtain – ON when the safety light curtain is interrupted
MEASURE-
MENT Excess voltage category II III II
SENSORS
Incorporated (Sliding switch allows selection of plus/minus ground) Incorporated (Cable connection allows selection of plus/minus ground)
STATIC Polarity selection function
Minus ground: Correspond to PNP output safety light curtain Minus ground: Correspond to PNP output safety light curtain
CONTROL (Note 4)
DEVICES Plus ground: Correspond to NPN output safety light curtain Plus ground: Correspond to NPN output safety light curtain
Pollution degree 2
LASER
MARKERS Protection Enclosure: IP40, Terminal: IP20 IP65 Enclosure: IP40, Terminal: IP20
Ambient temperature –10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –25 to +70 °C –13 to +158 °F
PLC Enclosure material ABS Die-cast aluminum ABS
Weight Net weight: 320 g approx. Net weight: 1 kg approx. Net weight: 200 g approx.
HUMAN
MACHINE Notes: 1) W
here measurement conditions have not been specified precisely, the
INTERFACES Dilating when SF-C11 units Dilating when SF-C13 units
conditions used were an ambient temperature of +20 °C +68 °F. are mounted close together are mounted close together
ENERGY
MANAGEMENT 2) SF-C11 and SF-C13 have acqusred the Korea S-mark.
SOLUTIONS 6 6
3) If several SF-C11 or SF-C13 units are being used in a line together, leave
5 5
a space of 5 mm 0.197 in or more between each unit. If the units are
Rated operation current (A)
FA 4 4
COMPONENTS touching each other, reduce the rated operating current for safety output
in accordance with the ambient operating temperature as shown in the 3 3
MACHINE 2 2
VISION graphs at right.
SYSTEMS 4) Please switch the sliding switch to the PNP side for minus ground and to 1 1
UV the NPN side for plus ground.
CURING 0 35 40 45 50 55 0 35 40 45 50 55
SYSTEMS 5) Refer to p.667 for details of the specifications for the control unit SF-C11/C12/C13. 32 95 104 113 122 131 32 95 104 113 122 131
Ambient temperature (°C °F) Ambient temperature (°C °F)
Model No.
SF-C14EX(-01) (Note 2)
Item
Connectable safety light curtains SF4B / SF4B-G series
Selection Applicable standards IEC 61496-1, EN 61496-1, ANSI/UL 61496-1, CAN/CSA 61496-1, JIS B 9704-1, etc.
Guide
CE marking directive compliance Machinery Directive, EMC Directive, RoHS Directive
Safety Light
Curtains Control category ISO 13849-1 (EN ISO 13849-1, JIS B 9705-1) compliance up to Category 4, PLe standards
Safety
Control Units Supply voltage / Current consumption 24 V DC ±10 % Ripple P-P 10 % or less / 0.2 A or less (without safety light curtain and other external connecting device)
Safety Safety output (Safety output 1, 2, 3) PNP open-collector transistor 2 outputs × 3 or NPN open-collector transistor 2 outputs × 3 (selectable using a slider switch)
Components
Safety output 1: ON when the safety light curtain is in light receiving condition, OFF when the safety light curtain is in light interrupted condition (Note 3)
Operation mode Safety output 2: O
N when the safety light curtain is in light receiving condition or the muting function is valid
(Output operation) OFF when the safety light curtain is in light interrupted condition and the muting function is invalid (Note 3)
SF4D
Safety output 3: ON when the emergency stop is invalid, OFF when the emergency stop is valid
SF4B/ OFF response: 14 ms or less (Safety output 1 and 2: including the response time of the safety light curtain)
SF4B-G Response time
ON response: 90 ms or less (auto-reset) / 140 ms or less (manual reset) (Note 4)
SF4B-C
Auxiliary outputs
[Auxiliary output 1, 2, 3, 4 (Note 5)] PNP open-collector transistor × 3 or NPN open-collector transistor × 3 (selectable using a slider switch)
SF4C
Auxiliary output 1: ON when the muting function is invalid, OFF when the muting function is valid
BSF4-AH80 Operation mode Auxiliary output 2: ON when the override function is invalid, OFF when the override function is valid
SF2B (Output operation) Auxiliary output 3: ON when the muting lamp is normal, OFF when the muting lamp is error
Auxiliary output 4: ON when the safety light curtain is in light interrupted condition, OFF when the safety light curtain is in light receiving condition (Note 5)
SF2C Muting lamp output Applicable muting lamp: 24 V DC, 3.6 to 30 W (L1, L2 of each unit)
Definition of Protection Enclosure: IP40, Terminal: IP20
Sensing Heights
Ambient temperature –10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –25 to +70 °C –13 to +158 °F
Material Enclosure: ABS
Connection terminal Detachable spring-cage terminal
Weight Net weight: 250 g approx.
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
2) SF-C14EX-01 is Handy-controller SFB-HC (optional) non-compatible type.
3) Both safety output 1 and 2 are OFF when the emergency stop is valid regardless of whether the safety light curtain is in the light receiving or light interrupted condition.
4) The auto-reset cannot be used with safety output 3.
5) The auxiliary output incorporated in the SF4B / SF4B-G series is outputed.
6) Refer to p.668 for details of the specifications for the control unit SF-C14EX(-01).
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
524
SPECIFICATIONS FIBER
SENSORS
LASER
Handy-controller SENSORS
Weight LASER
Net weight: 200 g approx. MARKERS
ENERGY
Model No. MANAGEMENT
SOLUTIONS
SF-LAT-2N / SF-LAT-4BG (For SF4B-□G□<V2>)
Item FA
COMPONENTS
Supply voltage 3 V (LR6 battery × 2 pcs.)
MACHINE
Battery 1.5 V (LR6 battery) × 2 pcs. (replaceable) VISION
SYSTEMS
Battery lifetime 30 hours approx. of continuous operation (LR6 battery, at +25 °C +77 °F ambient temperature) UV
CURING
Light source SYSTEMS
Red semiconductor laser: Class 2 (IEC / JIS / FDA) (Max. output: 1 mW, Peak emission wavelength: 650 nm 0.026 mil) (Note 2)
Spot diameter 10 mm 0.394 in approx. (at 5 m 16.404 ft distance)
Ambient temperature 0 to +40 °C +32 to +104 °F (No dew condensation), Storage: 0 to +55 °C +32 to +131 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Selection
Guide
Material Enclosure: ABS, Mounting part: Aluminum Safety Light
Curtains
Weight Net weight: 200 g approx. (including batteries) Safety
Control Units
Accessories LR6 battery: 2 pcs. Safety
Components
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
2) As for FDA regulation, the product complies with 21 CFR 1040.10 and 1040.11 based on Laser Notice No. 50, dated June 24, 2007, issued by CDRH
under the FDA. SF4D
SF4B/
SF4B-G
Corner mirror SF4B-C
Model No. SF4C
RF-SFBH-□
Item BSF4-AH80
Attenuation rate of sensing range With one corner mirror: Declined to 90 %, With two corner mirrors: Declined to 80 % (When used in combination with the SF4B series) SF2B
Ambient temperature –10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –25 to +70 °C –13 to +158 °F SF2C
Environmental
Definition of
Ambient humidity 30 to 85 % RH, Storage: 30 to 95 % RH Sensing Heights
resistance
Vibration resistance 10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each
Material Enclosure: Aluminum, Mounting bracket: Stainless steel, Mirror (rear surface mirror): Glass, Side cover: EPDM
Accessories Intermediate supporting bracket: 1 set (RF-SFBH-40/48/56/64), 2 sets (RF-SFBH-72/80/88/96)
Note: Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
525 Safety Light Curtain Type 4
LASER
SENSORS I/O circuit diagram
PHOTO- <In case of using I/O circuit for PNP output> <In case of using I/O circuit for NPN output>
ELECTRIC
SENSORS
MICRO Emitter Color code of mating cable
Emitter
PHOTO- Color code of mating cable
ELECTRIC
SENSORS (Brown) +V (Brown) +V
AREA
SENSORS
(Shield) Output polarity setting wire
SAFETY LIGHT (Red) Muting lamp output
CURTAINS / * S1 * S1 * S1 0.22 μF 470 Ω (Yellow) Override input
SAFETY (Pale purple) Interlock setting input
COMPONENTS
(Yellow-green / Black) 0.22 μF 470 Ω
PRESSURE /
FLOW Auxiliary output (Pink) Emission halt input / Reset input Load
SENSORS
0.22 μF 470 Ω
INDUCTIVE (Gray) Interference prevention +
Sensor circuit
Sensor circuit
PROXIMITY + 24 V DC +
SENSORS (Gray / Black) Interference prevention – 24 V DC
(Gray) Interference prevention + – ±10 % ±10 %
PARTICULAR (Gray / Black) Interference prevention – (Yellow-green / Black)
USE
SENSORS 0.22 μF (Yellow) Override input Auxiliary output
470 Ω
(Pale purple) Interlock setting input Load * S1 * S1 * S1
SENSOR
OPTIONS 0.22 μF 470 Ω
(Pink) Emission halt input / Reset input (Red) Muting lamp output
SIMPLE
WIRE-SAVING 0.22 μF 470 Ω
UNITS (Shield) Output polarity setting wire
WIRE-SAVING (Blue) 0 V (Blue) 0 V
SYSTEMS
(Orange) Synchronization + (Orange) Synchronization +
MEASURE-
MENT (Orange / Black) (Orange / Black) Synchronization –
SENSORS Synchronization –
Internal circuit Users’ circuit Internal circuit Users’ circuit
STATIC
CONTROL
DEVICES
Receiver Receiver
(Orange / Black) (Orange / Black)
Synchronization – Synchronization –
LASER
MARKERS
(Orange) Synchronization + (Orange) Synchronization +
(Brown) +V * S1 (Brown) +V
PLC * S1
(Gray) Interference prevention + (Shield) Output polarity setting wire
(Gray / Black) Interference prevention – K1
HUMAN K1
MACHINE 0.047 μF 1 kΩ (Sky-blue / White) Muting input A (Black) OSSD 1
INTERFACES K2
(Sky-blue / Black) Muting input B K2
ENERGY 0.047 μF 1 kΩ
MANAGEMENT
SOLUTIONS (Yellow-green) External device monitoring input
Sensor circuit
Sensor circuit
0.22 μF 470 Ω
FA (White) OSSD 2
COMPONENTS
(Black) OSSD 1
MACHINE
VISION
SYSTEMS
(Gray) Interference prevention +
UV (Gray / Black) Interference prevention –
CURING
SYSTEMS 0.22 μF 470 Ω (Yellow-green) External device monitoring input
(White) OSSD 2
K1 (Sky-blue / White) Muting input A
0.047 μF * S1 K1
1 kΩ
K2 (Sky-blue / Black) Muting input B K2
(Shield) Output polarity setting wire
0.047 μF 1 kΩ * S1
(Blue) 0 V (Blue) 0 V
Selection K1, K2: Force-guided relay or
Guide K1, K2: Force-guided relay or
magnet contactor magnet contactor
Safety Light
Curtains Internal circuit Users’ circuit Internal circuit
Safety Note: The above diagram is when using a 12-core cable. If an 8-core cable Note: The above diagram is when using a 12-core cable. If an 8-core cable
Control Units
Safety
is used, the red, yellow, gray, gray / black, sky-blue / white and sky- is used, the red, yellow, gray, gray / black, sky-blue / white and sky-
Components blue / black lead wires are absent. blue / black lead wires are absent.
* S1 * S1
SF4D
Switch S1 Switch S1
SF4B/
SF4B-G • Emission halt input / Reset input • Emission halt input / Reset input
For manual reset For manual reset
SF4B-C Vs to Vs – 2.5 V (sink current 5 mA or less): Emission halt (Note 1) 0 to +1.5 V (source current 5 mA or less): Emission halt
SF4C Open: Emission Open: Emission
For automatic reset For automatic reset
BSF4-AH80 Vs to Vs – 2.5 V (sink current 5 mA or less): Emission (Note 1) 0 to +1.5 V (source current 5 mA or less): Emission
Open: Emission halt Open: Emission halt
SF2B
• Interlock setting input, Override input, Muting input A/B, • Interlock setting input, Override input, Muting input A/B,
SF2C External device monitoring input External device monitor input
Definition of Vs to Vs – 2.5 V (sink current 5 mA or less): Enabled (Note 1) 0 to +1.5 V (source current 5 mA or less): Enabled
Sensing Heights Open: Disabled Open: Disabled
LASER
Connection example SENSORS
Standard components (8-core cable): Interlock function “enabled (manual reset)”, external device monitoring function “enabled” PHOTO-
ELECTRIC
SENSORS
<In case of using I/O circuit for PNP output> MICRO
The diagram at left shows the configuration when using PNP PHOTO-
Color code of mating cable output, interlock function “enabled (manual reset)” and external ELECTRIC
SENSORS
Emitter (Brown) +V
device monitoring function “enabled”.
AREA
* S1 SENSORS
In case of setting the interlock function to “disabled (automatic reset)”
(Yellow-green / Black) Auxiliary output SAFETY LIGHT
+ CURTAINS /
Cable color: Gray (Pale purple) Interlock setting input 24 V DC SAFETY
Emitter
– ±10 % COMPONENTS
(Pink) Emission halt input / Reset input
Load PRESSURE /
(Shield) Output polarity setting wire +24 V DC FLOW
* S1 SENSORS
(Blue) 0 V
(Orange) Synchronization + INDUCTIVE
PROXIMITY
SENSORS
(Orange / Black) Synchronization – (Pink) Emission halt input / Reset input
PARTICULAR
Receiver (Orange / Black) Synchronization – (Pale purple) Interlock setting input USE
Open SENSORS
(Orange) Synchronization +
(Brown) +V
* Refer to the SF4B / SF4B-G instruction manual on our website for SENSOR
Cable color: Gray OPTIONS
with black line
K1 interlock function.
K2 SIMPLE
WIRE-SAVING
(Yellow-green) External device monitoring input In case of setting the external device monitoring function to “disabled” UNITS
(Black) OSSD 1
(White) OSSD 2 Emitter WIRE-SAVING
K1 SYSTEMS
(Shield) Output polarity setting wire K2
MEASURE-
(Blue) 0 V MENT
SENSORS
K1, K2: Force-guided relay
or magnet contactor STATIC
* S1 (Yellow-green / Black) Auxiliary output CONTROL
DEVICES
Switch S1 LASER
Receiver MARKERS
• Emission halt input / Reset input
For manual reset
Vs to Vs – 2.5 V (sink current 5 mA or less): Emission halt (Note) PLC
Open: Emission
For automatic reset HUMAN
Vs to Vs – 2.5 V (sink current 5 mA or less): Emission (Note) MACHINE
INTERFACES
Open: Emission halt (Yellow-green) External device monitoring input ENERGY
MANAGEMENT
Note: Vs is the applying supply voltage. * Refer to the SF4B / SF4B-G instruction manual on our website for SOLUTIONS
external device monitoring function.
FA
COMPONENTS
The diagram at left shows the configuration when using NPN
<In case of using I/O circuit for NPN output> output, interlock function “enabled (manual reset)” and external MACHINE
VISION
Color code of mating cable device monitoring function “enabled”. SYSTEMS
Emitter UV
(Brown) +V In case of setting the interlock function to “disabled (automatic reset)” CURING
SYSTEMS
(Shield) Output polarity setting wire
(Pale purple) Interlock setting input Emitter
Load
Cable color: Gray (Pink) Emission halt input / Reset input + 24 V DC
(Yellow-green / Black) Auxiliary output – ±10 %
* S1
(Blue) 0 V Selection
Guide
Open
(Orange) Synchronization + (Pale purple) Interlock setting input Safety Light
Curtains
(Orange / Black) Synchronization – (Pink) Emission halt input / Reset input
Safety
Control Units
Receiver (Orange / Black) Synchronization – * S1
Safety
Components
(Orange) Synchronization +
0V
Cable color: Gray (Brown) +V
with black line (Shield) Output polarity setting wire
K1 * Refer to the SF4B / SF4B-G instruction manual on our website for
SF4D
interlock function.
(Black) OSSD 1 K2 SF4B/
SF4B-G
(White) OSSD 2 In case of setting the external device monitoring function to “disabled”
(Yellow-green) External device monitoring input SF4B-C
K1
Emitter SF4C
K2
(Blue) 0 V BSF4-AH80
K1, K2: Force-guided relay
or magnet contactor SF2B
* S1 SF2C
(Yellow-green / Black) Auxiliary output
Switch S1 Definition of
Sensing Heights
• Emission halt input / Reset input
Receiver
For manual reset
0 to +1.5 V (source current 5 mA or less): Emission halt
Open: Emission
For automatic reset
0 to +1.5 V (source current 5 mA or less): Emission
Open: Emission halt
(Yellow-green) External device monitoring input
* Refer to the SF4B / SF4B-G instruction manual on our website for
external device monitoring function.
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
527 Safety Light Curtain Type 4
LASER
SENSORS Connection example
PHOTO- Muting control components (12-core cable, with interference prevention wires): Interlock function “disabled (automatic reset)”, external device monitoring function “disabled”
ELECTRIC
SENSORS
<In case of using I/O circuit for PNP output>
MICRO
PHOTO-
ELECTRIC Color code of mating cable The diagram at left shows the configuration when using PNP
SENSORS
Emitter (Brown) +V output, interlock function “disabled (automatic reset)” and external
AREA
SENSORS device monitoring function “disabled”.
(Red) Muting lamp output
SAFETY LIGHT * S1 * S1 In case of setting the interlock function to “enabled (manual reset)”
CURTAINS /
SAFETY Cable color: Gray
(Yellow-green / Black) Auxiliary output
COMPONENTS • When the interlock function is “enabled (manual reset)”,
(Gray) Interference prevention + Uses when the interference
PRESSURE /
FLOW (Gray / Black) Interference prevention – prevention function is used the override function cannot be used.
SENSORS (Yellow) Override input
+ 24 V DC Emitter
INDUCTIVE (Pale purple) Interlock setting input: Open ±10 %
PROXIMITY –
SENSORS (Pink) Emission halt input / Reset input
(Shield) Output polarity setting wire * S1 +24 V DC
PARTICULAR
USE (Blue) 0 V
SENSORS (Orange) Synchronization +
SENSOR Receiver (Orange / Black) Synchronization –
(Pink) Emission halt input / Reset input
OPTIONS (Pale purple) Interlock setting input
(Orange / Black) Synchronization –
SIMPLE (Orange) Synchronization + * Refer to the SF4B / SF4B-G instruction manual on our website for
WIRE-SAVING Cable color: Gray
UNITS with black line (Brown) +V * S1 interlock function.
(Gray) Interference prevention + Uses when the interference
WIRE-SAVING prevention function is used * S1
(Gray / Black) Interference prevention – In case of setting the external device monitoring function to “enabled”
SYSTEMS
(Sky-blue / White) Muting input A
(Sky-blue / Black) Muting input B +24 V DC
MEASURE-
MENT (Yellow-green) External device monitoring input K1
SENSORS (Black) OSSD 1 Receiver
STATIC (White) OSSD 2 K1 K1, K2: K2
CONTROL (Shield) Output polarity setting wire
DEVICES K2 Force-guided relay (Yellow-green)
(Blue) 0 V or magnet contactor External device monitoring input
* S1
LASER
MARKERS
Switch S1 (Black) OSSD 1
• Emission halt input / Reset input
PLC
For manual reset K1
Vs to Vs – 2.5 V (sink current 5 mA or less): Emission halt (Note), Open: Emission (White) OSSD 2
HUMAN K2
MACHINE For automatic reset
INTERFACES Vs to Vs – 2.5 V (sink current 5 mA or less): Emission (Note), Open: Emission halt
K1, K2: External device 0 V
ENERGY • Override input, Muting input A/B, External device monitoring input
MANAGEMENT
Vs to Vs – 2.5 V (sink current 5 mA or less): Enabled (Note), Open: Disabled * Refer to the SF4B / SF4B-G instruction manual on our website for
SOLUTIONS
external device monitoring function.
FA Note: Vs is the applying supply voltage.
COMPONENTS
MACHINE
<In case of using I/O circuit for NPN output>
VISION
SYSTEMS Color code of mating cable The diagram at left shows the configuration when using NPN
UV Emitter (Brown) +V output, interlock function “disabled (automatic reset)” and external
CURING
SYSTEMS
(Shield) Output polarity setting wire device monitoring function “disabled”.
(Yellow) Override input
* S1
(Pale purple) Interlock setting input: Open + 24 V DC In case of setting the interlock function to “enabled (manual reset)”
Cable color: Gray
(Pink) Emission halt input / Reset input – ±10 %
• When the interlock function is “enabled (manual reset)”,
(Gray) Interference prevention + Uses when the interference
(Gray / Black) Interference prevention – prevention function is used the override function cannot be used.
Selection (Yellow-green / Black) Auxiliary output * S1
Guide Emitter
Safety Light
(Red) Muting lamp output
Curtains
(Blue) 0 V (Pale purple) Interlock setting input
Safety
Control Units (Orange) Synchronization +
Safety (Pink) Emission halt input / Reset input
Components (Orange / Black) Synchronization –
* S1
Receiver (Orange / Black) Synchronization –
(Orange) Synchronization +
SF4D
(Brown) +V 0V
Cable color: Gray K1
SF4B/ (Shield) Output polarity setting wire
SF4B-G with black line (Black) OSSD 1 K2 * Refer to the SF4B / SF4B-G instruction manual on our website for
SF4B-C (White) OSSD 2 interlock function.
(Gray) Interference prevention + Uses when the interference
SF4C (Gray / Black) Interference prevention – prevention function is used
In case of setting the external device monitoring function to “enabled”
(Yellow-green) External device monitoring input
BSF4-AH80
(Sky-blue / White) Muting input A * S1 +24 V DC
SF2B Receiver K1
(Sky-blue / Black) Muting input B K1, K2:
* S1 Force-guided relay (Black) OSSD 1 K2
SF2C (Blue) 0 V or magnet contactor
Definition of * S1
Sensing Heights (White) OSSD 2
Switch S1
• Emission halt input / Reset input (Yellow-green)
External device monitoring input
For manual reset
0 to +1.5 V (source current 5 mA or less): Emission halt, Open: Emission K1
For automatic reset K2
0 to +1.5 V (source current 5 mA or less): Emission, Open: Emission halt 0V
• Override input, Muting input A/B, External device monitoring input K1, K2: External device
0 to +1.5 V (source current 5 mA or less): Enabled, Open: Disabled * Refer to the SF4B / SF4B-G instruction manual on our website for
external device monitoring function.
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
528
Refer to the instruction manual for details.
I/O CIRCUIT AND WIRING DIAGRAMS The instruction manual can be download from our website. FIBER
SENSORS
LASER
SF-C11 SENSORS
PHOTO-
SF4B / SF4B-G series wiring diagram (Control Category 4) When SF-C11 is connected to the safety light curtain, be ELECTRIC
SENSORS
For PNP output (minus ground) sure to use the following mating cable. MICRO
PHOTO-
SFB-CB□, SFB-CCJ10□ ELECTRIC
• Set the safety light curtain input polarity selection switch SENSORS
SAFETY LIGHT
RESET CURTAINS /
+24 V DC (Note 1) FUSE1 FUSE2 Terminal Function SAFETY
(Note 1)
COMPONENTS
A1 (Note 2) X1 X2 X3 A B 13 23 33 41
A1 +24 V DC PRESSURE /
FLOW
A2 0V SENSORS
Receiver side F K1
connector NPN 13-14, 23-24, 33-34 Safety output (NO contact × 3) INDUCTIVE
Ui SF-C11 control circuit PNP PROXIMITY
41-42 Auxiliary output (NC contact × 1) SENSORS
K2
X1 Reset output terminal PARTICULAR
Emitter side OUT INTER_LOCK FAULT USE
SENSORS
connector L1 L2 L3 X2 Reset input terminal (Manual)
A2 AUX T2 T1 14 24 34 42 KB
KA, KB: Force-guided relay or X3 Reset input terminal (Automatic) SENSOR
KB KA OPTIONS
F.G. 0V TEST magnet contactor KA
(Note 3) A
N Not used SIMPLE
M B WIRE-SAVING
Notes: 1) T he above diagram is when using manual reset. If 3 UNITS
T1 Test output terminal
automatic reset is used, disconnect the lead from X2 and
WIRE-SAVING
connect it to X3. In this case, a reset (RESET) button is not needed. T2 Test input terminal SYSTEMS
2) Use a momentary-type switch as the reset (RESET) button. AUX Semiconductor auxiliary output
3) Emission halt occurs when the test (TEST) button is open, and MEASURE-
MENT
emission occurs when the test (TEST) button is short-circuited. If SENSORS
not using the test (TEST) button, short-circuit T1 and T2. Pin layout for safety light curtain connectors STATIC
CONTROL
Safety light curtain input DEVICES
For NPN output (plus ground) 2 1 Connector Emitter side Receiver side
polarity selection switch 8
3
• In the above pin No. connector connector LASER
MARKERS
diagram, set +24 V DC RESET 7 1 Interlock OSSD 2
the safety F.G. A1 X1 X2 X3 A B 4 6 2 +24 V DC +24 V DC PLC
For PNP output (minus ground) sure to use the following mating cable.
SFB-CB05-MU, SFB-CCJ10□-MU
• Set the two safety light curtain input polarity select
switches to the PNP side and connect the FG terminal to Terminal arrangement
FB1
FB2
FB3
FB4
FG
R+
E+
X1
X2
A1
A2
T1
T2
32
31
24
23
14
13
Selection
the 0 V line. diagram Guide
Safety Light
Emission halt input switch Curtains
(Note) (Note)
X1 Safety light curtain input Terminal Function Terminal Function Safety
Interference polarity selection switch Control Units
X2
FG Frame ground (F.G.) terminal R+ Interference prevention wire – (Receiver side)
prevention wire T1
Safety
Emitter side connector
T2
A2 0V R– Interference prevention wire + (Receiver side) Components
E+
A1 +24 V DC E+ Interference prevention wire – (Emitter side)
NPN
PNP
A1
A2
SF4C
MPCE2
FG
Pin layout for safety light curtain connectors BSF4-AH80
LASER
SENSORS SF-C13
PHOTO-
ELECTRIC SF4B / SF4B-G series wiring diagram (Control Category 4)
SENSORS
MICRO
PHOTO-
For PNP output (minus ground) For NPN output (plus ground)
ELECTRIC
SENSORS • Connect the safety light curtain control outputs OSSD 1 • Connect the safety light curtain control outputs OSSD 1
AREA and OSSD 2 to S1 and S2 respectively. and OSSD 2 to S4 and S2 respectively and ground the +
SENSORS
side.
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
(Orange / Black) Synchronization – (Orange / Black) Synchronization –
PRESSURE / Emitter Receiver Emitter Receiver
FLOW Cable color: Cable color:
SENSORS
Cable color: Gray Gray with black line Cable color: Gray Gray with black line
INDUCTIVE
PROXIMITY (Orange) (Orange)
SENSORS +V (Brown) +V (Brown)
Synchronization + Synchronization +
+24 V DC +24 V DC
PARTICULAR
USE
SENSORS Output Emission
polarity halt Auxiliary output Interlock setting Output Emission halt Auxiliary output Interlock setting
setting wire input / Reset (Yellow-green / input (Pale purple) polarity input / Reset input (Yellow-green / input (Pale purple) Output
SENSOR Output polarity
OPTIONS (Shield) input (Pink) Black) Open +V (Brown) polarity setting wire (Pink) Black) Open
(Shield) 0V setting wire
setting wire Load +V (Brown) (Shield)
SIMPLE Load (Shield) (Blue)
WIRE-SAVING 0 V (Blue) 0 V (Blue) 0 V (Blue)
UNITS
External device monitoring input (Yellow-green) External device monitoring input (Yellow-green)
WIRE-SAVING OSSD 1 (Black) OSSD 2 (White)
SYSTEMS
OSSD 2 (White) OSSD 1 (Black)
MEASURE- L1
MENT L1
SENSORS RESET
(Note 1,2) (Note 1) FUSE1 (Note 1) FUSE1 FUSE2
STATIC FUSE2
CONTROL
DEVICES A1 S1 S2 S3 S4 X1 X2 X3 13 23 33 41 A1 S1 S2 S3 S4 X1 X2 X3 13 23 33 41
F.G.
LASER RESET
MARKERS F K1 F K1 (Note 1,2)
LASER
SF-C14EX(-01) SENSORS
STATIC
For NPN output (plus ground) CONTROL
DEVICES
• Set the output polarity selection switch to the NPN side and ground the side of the power supply input.
LASER
(Note 1) (Note 1) MARKERS
Emergency
stop button PLC etc.
KA KC KE RESET PLC
+24 V DC RESET RESET
KB (Note 2) KD (Note 2) KF (Note 2)
HUMAN
F.G. A1 S11 S12 S21 S22 X11 X12 X13 X21 X22 X23 X31 X32 AUX1 AUX2 AUX3 AUX4 IE+ IE– IR+ IR– MACHINE
INTERFACES
Receiver side NPN
Output polarity
connector selection switch ENERGY
MANAGEMENT
PNP SF-C14EX(-01) control circuit Notes: 1) T
he left diagram is when using manual reset. If automatic reset SOLUTIONS
is used, disconnect the lead from X12 and connect it to X13,
Emitter side FA
and disconnect the lead from X22 and connect it to X23, as COMPONENTS
connector shown by the dotted lines. In this case, a reset (RESET) button
A2 S3+ S3 S3– S4+ S4 S4– T1 T2 O1 O2 L1+ L1– L2+ L2– 14 24 34 44 54 64 MACHINE
KB KD KF is not needed. Terminals X31 to X32 are for manual reset only. VISION
+V OUT 0 V +V OUT 0 V
0V 2) Use a momentary-type switch for the reset (RESET) button. SYSTEMS
KA KC KE
UV
TEST CURING
Muting sensor 1 Muting sensor 2 +24 V DC SYSTEMS
(PNP output type) (NPN output type) Muting lamp Muting lamp
output 1 output 2 KA to KF: Force-guided relay or
Override input 3.6 to 30 W 3.6 to 30 W magnet contactors.
Terminal arrangement Terminal Function Terminal Function Pin layout for safety light curtain connectors
diagram 14 Safety output 1, Beam received S11 Emergency stop
Selection
Guide
/ Beam interrupted output of the 2 1
Connector Emitter Receiver Safety Light
24 safety light curtain S12 contact input 3 8
side side Curtains
2 NC input pin No. connector connector
34 Safety output 2, safety light S21 Between S11 and S12 Safety
Control Units
curtain output including the
44 muting function S22 Between S21 and S22 7
1 Interference prevention Interference prevention Safety
Components
4 6
wire + wire +
54 Safety output 3 X11
Safety output 1 reset input 5 2 +24 V DC +24 V DC
64 Emergency stop output X12 X11 - X12: Manual reset SF4D
X11 - X13: Automatic reset 3 Interference prevention Interference prevention
S3+ Muting sensor input 1 X13 SF4B/
wire – wire – SF4B-G
(PNP output type)
S3 X21 4 Auxiliary output Not used SF4B-C
S3+, S3–: Power supply Safety output 2 reset input
S3– S3: Sensor output X22 X21 - X22: Manual reset Synchronization Synchronization
5 SF4C
X21 - X23: Automatic reset wire + wire +
S4+ Muting sensor input 2 X23
Synchronization Synchronization BSF4-AH80
(NPN output type) 6
S4 X31 Safety output 3 reset input wire – wire –
S4+, S4–: Power supply SF2B
S4– S4: Sensor output X32 X31 - X32: Manual reset 7 0V 0V
SF2C
T1 Test input terminal AUX1 Auxiliary output 1, Muting output 8 Shield wire Shield wire Definition of
Open: Test mode Sensing Heights
T2 Short-circuit: Normal operation AUX2 Auxiliary output 2, Override output
O1 Override input terminal AUX3 Auxiliary output 3, Blown lamp output
Open: Invalid
O2 Short-circuit: Valid AUX4 Auxiliary output 4, safety light curtain auxiliary output
L1+ Muting lamp IE+ Interference prevention terminal, Emitter side +
L1– output 1 IE– Interference prevention terminal, Emitter side –
L2+ Muting lamp IR+ Interference prevention terminal, Receiver side +
L2– output 2 IR– Interference prevention terminal, Receiver side –
A1 +24 V DC
A2 0 V
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
531 Safety Light Curtain Type 4
LASER
SENSORS Interlock function Override function
PHOTO- • The selection of manual reset / automatic reset is available • This function sets the safety function of this safety light
ELECTRIC
SENSORS by applying the interlock input wiring. The interlock curtain enabled forcibly. When using the muting function,
MICRO
PHOTO- becomes available by selecting manual reset. the override function can be used to start the machinery
ELECTRIC
SENSORS (Refer to the SF4B / SF4B-G instruction manual for details.) at times such as when the control outputs (OSSD 1 and
OSSD 2) are OFF or when the muting sensors are ON
AREA
SENSORS
Emission halt function when the line is to be started.
SAFETY LIGHT The override function becomes valid when all the
CURTAINS /
SAFETY • This function stops the emission process of the emitter. conditions listed below are satisfied.
COMPONENTS You can select whether emission is on or halted by However, this function cannot be used with the
PRESSURE /
FLOW means of the connection status for the emission halt SF4B-□-03<V2>.
SENSORS
input / reset input wire (pink). (Refer to the SF4B / SF4B-G instruction manual for details.)
INDUCTIVE
PROXIMITY • During emission halt, the control outputs (OSSD 1,
SENSORS
OSSD 2) become OFF status. Series connection
PARTICULAR
USE • By using this function, malfunction due to extraneous
SENSORS Connectable up to 3 sets of safety light curtains
noise or abnormality in the control outputs (OSSD 1,
(however, 192 beam channels max.)
SENSOR OSSD 2) and the auxiliary output can be determined
OPTIONS
even from the machinery side. (Refer to the SF4B / SF4B-G instruction manual for details.)
SIMPLE
• Normal operation is restored when the emission halt input /
WIRE-SAVING Parallel connection
UNITS
reset input wire (pink) is connected to 0 V or +V.
WIRE-SAVING (Refer to the SF4B / SF4B-G instruction manual for details.) Connectable up to 3 sets of safety light cartains
SYSTEMS
(Refer to the SF4B / SF4B-G instruction manual for details.)
MEASURE-
MENT Auxiliary output (Non-safety output)
SENSORS
• This safety light curtain incorporates the auxiliary output Series and parallel mixed connection
STATIC
CONTROL (yellowgreen / black) for the non-safety output. The auxiliary
DEVICES Connectable up to 3 sets of safety light curtains
output is incorporated with the emitter. (however, 192 beam channels max.)
LASER (Refer to the SF4B / SF4B-G instruction manual for details.)
MARKERS (Refer to the SF4B / SF4B-G instruction manual for details.)
PLC External device monitoring function
Wiring
HUMAN • This is the function for checking whether the external safety
MACHINE
INTERFACES relay connected to the control outputs (OSSD 1, OSSD 2) perform Refer to the applicable regulations for the
ENERGY
normally in accordance with the control outputs (OSSD 1, OSSD 2) region where this device is to be used when
MANAGEMENT
SOLUTIONS
or not. Monitor the contacting point “b” of the external safety relay, setting up the device. In addition, make sure
and if any abnormality such as deposit of the contacting point, that all necessary measures are taken to
FA
COMPONENTS etc. is detected, change the status of the safety light curtain into prevent possible dangerous operating errors
lockout one, and turn OFF the control outputs (OSSD 1, OSSD 2). resulting from earth faults.
MACHINE
VISION (Refer to the SF4B / SF4B-G instruction manual for details.)
SYSTEMS
• Make sure to carry out the wiring in the power supply off
UV
CURING Muting function condition.
SYSTEMS
• Verify that the supply voltage variation is within the rating.
• This function turns the safety function of this safety
• If power is supplied from a commercial switching
light curtain into disabled temporarily. When the control
regulator, ensure that the frame ground (F.G.) terminal of
outputs (OSSD 1, OSSD 2) are ON, this function is
the power supply is connected to an actual ground.
available for passing the workpiece through the sensing
Selection
area of the safety light curtain without stopping the • In case noise generating equipment (switching regulator,
Guide
Safety Light machinery. inverter motor, etc.) is used in the vicinity of this sensor,
Curtains
The muting function becomes valid when all the connect the frame ground (F.G.) terminal of the
Safety
Control Units conditions listed below are satisfied. equipment to an actual ground.
Safety
Components However, this function connot be used with the • Do not run the wires together with high-voltage lines or
SF4B-□-03<V2>. power lines or put them in the same raceway. This can
1 The control outputs (OSSD 1, OSSD 2) shall be ON.
cause malfunction due to induction.
SF4D
2 The incandescent lamp with 3 to 10 W shall be
SF4B/ Others
SF4B-G connected to the muting lamp output (red).
SF4B-C 3 The output of the muting sensors A and B shall be • This device has been developed / produced for industrial
SF4C changed from OFF (open) to ON. At this time, the use only.
time difference occurred by changing the output of the • Do not use during the initial transient time (2 sec.) after
BSF4-AH80
muting sensors A and B into ON status shall be within the power supply is switched on.
SF2B 0.03 to 3 sec. • Avoid dust, dirt and steam.
SF2C • The following devices, photoelectric sensor with • Take care that the safety light curtain does not come in
Definition of semiconductor output, inductive proximity sensor, direct contact with water, oil, grease, or organic solvents,
Sensing Heights
position switch on N.O. (Normally open) contact, etc. are such as, thinner, etc.
available for applying to the muting sensor. • Take care that the safety light curtain is not directly
• In case of using the muting function, please order 12-core exposed to fluorescent light from a rapid-starter lamp
cable. or a high frequency lighting device, as it may affect the
(Refer to the SF4B / SF4B-G instruction manual for details.) sensing performance.
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
532
Refer to the instruction manual for details.
PRECAUTIONS FOR PROPER USE The instruction manual can be download from our website. FIBER
SENSORS
LASER
Safety distance SENSORS
• When this device is used in the “PSDI
mode”, an appropriate control circuit must PHOTO-
• Calculate the safety distance correctly, and ELECTRIC
be configured between this device and the SENSORS
always maintain a distance which is equal to
machinery. For details, be sure to refer to the MICRO
or greater than the safety distance, between PHOTO-
standards or regulations applicable in each ELECTRIC
the sensing area of this safety light curtain SENSORS
region or country.
and the dangerous parts of the machinery. AREA
• To use this device in the U.S.A., refer to (Please check the latest standards for
SENSORS
OSHA 1910. 212 and OSHA 1910. 217 for the equation.) If the safety distance is SAFETY LIGHT
CURTAINS /
installation, and in Europe, refer to EN ISO miscalculated or if sufficient distance is not SAFETY
COMPONENTS
13855 as well. Observe your national and maintained, there is a danger of serious PRESSURE /
local requirements before installing this injury or death.
FLOW
SENSORS
product.
• Before designing the system, refer to the INDUCTIVE
PROXIMITY
relevant standards of the region where this SENSORS
• This catalog is a guide to select a suitable product. Be device is to be used and then install this device. PARTICULAR
sure to read instruction manual prior to its use. USE
SENSORS
• Both emitter and receiver are adjusted before
Dangerous part SENSOR
shipment, please apply both emitter and receiver with of machine OPTIONS
the same serial No. The serial No. is indicated on the Emitter
S
Sensing area Receiver
SIMPLE
(beam axis)
plates of both emitter and receiver. WIRE-SAVING
UNITS
(Indicated under model No.)
WIRE-SAVING
SYSTEMS
• Make sure to carry out the test run before regular operation. S: Safety distance
MEASURE-
• This safety system is for use only on machinery in which MENT
SENSORS
the dangerous parts can be stopped immediately, either
by an emergency stop unit or by disconnecting the power The sizes of the minimum sensing objects STATIC
CONTROL
supply. Do not use this system with machinery which for this device vary depending on whether DEVICES
cannot be stopped at any point in its operation cycle. or not the floating blanking function is being LASER
used. Calculate the safety distance with the MARKERS
• Make sure to install this device such that Size of minimum sensing object when applying floating blanking function HUMAN
any part of the human body must pass MACHINE
INTERFACES
through its sensing area in order to reach Min. sensing object when applying floating blanking function
ENERGY
the dangerous parts of the machinery. If Setting (Note) MANAGEMENT
Invalid SOLUTIONS
the human body is not detected, there is a 1 beam channel 2 beam channels 3 beam channels
danger of serious injury or death. SF4B-F□(G) (Min. sensing object ø14 mm ø0.551 in) ø14 mm ø0.551 in ø24 mm ø0.945 in ø34 mm ø1.339 in ø44 mm ø1.732 in
FA
COMPONENTS
• Do not use any reflective type or
SF4B-H□(G) (Min. sensing object ø25 mm ø0.984 in) ø25 mm ø0.984 in ø45 mm ø1.772 in ø65 mm ø2.559 in ø85 mm ø3.346 in MACHINE
retroreflective type arrangement. VISION
SYSTEMS
• Multiple receivers (emitters) cannot be SF4B-A□(G) (Min. sensing object ø45 mm ø1.772 in) ø45 mm ø1.772 in ø85 mm ø3.346 in ø125 mm ø4.921 in ø165 mm ø6.496 in
UV
connected for use with a single emitter Note: R
efer to p.507 for the floating blanking function. However, the floating CURING
SYSTEMS
(receiver). blanking function cannot be used with the SF4B-□-01<V2>,
the SF4B-□-03<V2> and the SF-C14EX-01.
Example of correct sensing area setup • The safety distance is calculated using the equations
Dangerous part Sensing area
Protective structure given on the following pages when a person moves
Selection
perpendicularly (normal intrusion) into the sensing area of Guide
the device. If the intrusion direction is not perpendicular, Safety Light
Curtains
always check the related standards (regional, machine Safety
standards, etc.) Control Units
Safety
Components
For use based on EN ISO 13855 / ISO 13855 / JIS B 9715
Dangerous part
For intrusion direction perpendicular to the sensing area SF4D
<In case that the minimum sensing object is ø40 mm ø1.575 in or less> SF4B/
Sensing area
SF4B-G
• Equation 1 S=K×T+C
SF4B-C
Example of incorrect sensing area setup S: S afety distance (mm)
Dangerous part Dangerous part Minimum required distance between the sensing area SF4C
Sensing area
surface and the dangerous parts of the machine BSF4-AH80
K: Intrusion velocity of operator’s body or object (mm/sec.)
SF2B
Normally taken as 2,000 (mm/sec.) for calculation
T: R
esponse time of total equipment (sec.) SF2C
T = Tm + TSF4B Definition of
Sensing Heights
Tm: Maximum halting time of machinery (sec.)
TSF4B: Response time of the SF4B / SF4B-G series
Sensing (sec.)
area C: Additional distance calculated from the size of the
minimum sensing object of the safety light curtain
(mm)
However, the value of “C” cannot be less than 0.
C = 8 × (d – 14)
d: Minimum sensing object diameter (mm)
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
533 Safety Light Curtain Type 4
LASER
SENSORS Handy-controller
• For calculating the safety distance “S”, there are the
PHOTO- following five cases.
ELECTRIC This device enables to set each function
SENSORS First calculate by substituting the value K = 2,000
using the handy-controller SFB-HC (optional).
MICRO
(mm/sec.) in the equation above. Then, classify the
PHOTO-
(However, a handy-controller cannot be used
ELECTRIC
obtained value of “S” into three cases, 1) S < 100, 2)
SENSORS
with the SF4B-□-01<V2>, the SF4B-□-03<V2>
100 ≤ S ≤ 500, and 3) S > 500. For Case 3) S > 500,
AREA and the SF-C14EX-01.) Among the functions,
SENSORS recalculate by substituting the value K = 1,600 (mm/
the contents related to the safety distance such
SAFETY LIGHT sec.). After that, classify the calculation result into
CURTAINS / as the size of the minimum sensing object and
SAFETY two cases, 4) S ≤ 500 and 5) S > 500. For details,
COMPONENTS response time are varied depending on the
refer to the instruction manual enclosed with this
PRESSURE / setting condition. When setting each function,
FLOW product. For calculating “Tm” (maximum halt time of
SENSORS re-calculate the safety distance, and make
the machinery), use a special device called a “brake
INDUCTIVE enough space larger than the calculated safety
PROXIMITY monitor”.
SENSORS distance. Failure to do so might cause the
When this device is used in the “PSDI mode”, an
PARTICULAR accident that the device cannot stop quickly
USE appropriate safety distance “S” must be calculated.
SENSORS before reaching the dangerous area of the
For details, be sure to refer to the standards or
machinery, resulting in the serious injury or
SENSOR regulations applicable in each region or country.
OPTIONS death.
SIMPLE
WIRE-SAVING <In the case that the minimum sensing object is ø40 mm ø1.575 in or more>
UNITS • Refer to the instruction manual of the handy-controller
• Equation S=K×T+C for details of the function settings for using handy-
WIRE-SAVING
SYSTEMS S: Safety distance (mm) controller SFB-HC (optional).
K: Intrusion velocity of operator’s body or object (mm/sec.)
MEASURE-
MENT Taken as 1,600 (mm/sec.) for calculation
SENSORS
T: R
esponse time of total equipment (sec.) Corner mirror
STATIC
CONTROL T = Tm + TSF4B
DEVICES
Tm: Maximum halting time of machinery (sec.)
LASER TSF4B: Response time of the SF4B / SF4B-G series (sec.) • Be sure to carry out maintenance while
MARKERS
C: Additional distance calculated from the size of the referring to the instruction manual for
minimum sensing object of the safety light curtain (mm) the SF4B / SF4B-G series of safety light
PLC
C = 850 (mm) (Constant) curtains.
HUMAN • Do not use if dirt, water, or oil, etc. is
MACHINE For use based on ANSI B11.19 attached to the reflective surface of this
INTERFACES
ENERGY
• Equation 2 S = K× (TS + TC + TSF4B + Tbm) + Dpf product. Appropriate sensing range may not
MANAGEMENT
SOLUTIONS
S: S afety distance (mm) be maintained due to diffusion or refraction.
Minimum required distance between the sensing area • Make sure that you have read the instruction
FA
COMPONENTS
surface and the dangerous parts of the machine manual for the corner mirror thoroughly
K: Intrusion velocity {Recommended value in OSHA is 63 before setting up the corner mirrors
MACHINE
VISION (inch/sec.) ≈ 1,600 (mm/sec.)} and safety light curtains, and follow the
SYSTEMS
ANSI B11.19 does not define the intrusion velocity instructions given. If the equipment is not set
UV
CURING
“K”. When determining “K”, consider possible factors up correctly as stipulated in the instruction
SYSTEMS including physical ability of operators. manual, incident light errors may result in
TS: Halting time calculated from the operation time of the unexpected situations which may result in
control element (air valve, etc.) (sec.) serious injury or death.
TC: Maximum response time of the control circuit required • Please download the instruction manuals
for functioning the brake (sec.) from our website.
Selection
Guide TSF4B: Response time of safety light curtain (sec.)
• Safety light curtain SF4B / SF4B-G series
Safety Light Tbm: Additional halting time tolerance for the brake
Curtains cannot be used as a retroreflective type.
monitor (sec.)
Safety
Control Units Avoid installing the safety light curtain as
The following equation holds when the machine is
Safety a retroreflective type when this product is
Components equipped with a brake monitor.
applied.
Tbm = Ta – (Ts + Tc)
Ta: Setting time of brake monitor (sec.) • The mirror part of this product is made of
SF4D
When the machine is not equipped with a brake glass. Note that if it is broken, the glass
SF4B/
monitor, it is recommended that 20 % or more of shards may fly apart.
SF4B-G
SF4B-C (Ts + Tc) is taken as additional halting time. • Do not use if crack or breakage appears on
Dpf: Additional distance calculated from the size of the the reflective surface of this product. Proper
SF4C
minimum sensing of the safety light curtain (mm) sensing range may not be maintained due to
BSF4-AH80 SF4B-F□(G)<V2>: Dpf = 23.8 mm 0.937 in diffusion or refraction.
SF2B SF4B-H□(G□)<V2>: Dpf = 61.2 mm 2.409 in If crack or breakage appears on the
SF4B-A□(G)<V2>: Dpf = 129.2 mm 5.087 in reflective surface of this product, replace the
SF2C
product.
Definition of Dpf = 3.4 × (d – 0.276) (inch)
Sensing Heights ≈ 3.4 × (d – 7) (mm) • When adjusting beam channels with a laser
d: Minimum sensing object diameter 0.552 (inch) ≈ 14 (mm) SF4B-F□(G)<V2> alignment tool, etc., take sufficient care that
Minimum sensing object diameter 0.985 (inch) ≈ 25 (mm) SF4B-H□(G□)<V2> the laser beam reflected by this product does
Minimum sensing object diameter 1.772 (inch) ≈ 45 (mm) SF4B-A□(G)<V2> not enter the eyes.
• Failure to follow the above items may result
in death or serious injury.
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
534
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website. FIBER
SENSORS
LASER
SF4B-□<V2> Not available for the robust type SF4B-□G□<V2> Safety light curtain SENSORS
LASER
MARKERS
19 H 5 5 19 34.2 H 5 34.2
0.748 5 0.197 1.346
0.197 0.197 0.748 1.346 0.197
PLC
ENERGY
MANAGEMENT
Mounting Total Intermediate supporting Beam First beam SOLUTIONS
Protective height
pitch length bracket mounting pitch pitch channel position FA
COMPONENTS
A’ (Note) Model No.
Model No. MACHINE
VISION
SYSTEMS
A SF4B-F□<V2> B C D E F G H
SF4B-A□<V2> UV
SF4B-H□<V2> CURING
SYSTEMS
FIBER
SENSORS
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
LASER
SENSORS SF4B-□<V2> Not available for the robust type SF4B-□G□<V2> Safety light curtain
PHOTO-
ELECTRIC Assembly dimensions
SENSORS
MICRO Mounting drawing for the safety light curtains using the dead zoneless mounting brackets MS-SFB-3 (optional) and the
PHOTO-
ELECTRIC intermediate supporting brackets.
SENSORS
AREA
<Rear mounting> <Side mounting>
SENSORS 50
50 50 1.969 50
SAFETY LIGHT 43 1.969 1.969 43 1.969
1.693 42 42 43 27 28 28 27 43
CURTAINS / 1.654 1.693 1.063 1.102 1.102 1.063
SAFETY 34 1.654 34 1.693 1.693
1.339 28 1.102 28 1.102 1.339 30 1.181 33 1.299 33 30 1.181
COMPONENTS 15 3 3 15 3 1.299 14 25
0.591 0.118 25 0.984 25 0.984 0.118 25 0.984 14 0.551 0.551 0.984 3 0.118
PRESSURE / 0.118 0.591
FLOW 21 0.827 21 0.827 21 0.827 21 0.827
SENSORS 26 1.024 26 1.024 26 1.024 26 1.024
INDUCTIVE 1.5 3 0.118 5.5 5.5 5.5 5.5
PROXIMITY 0.059 0.217 0.217 3 0.118 1.5 3 0.118 0.217 0.217 3 0.118
SENSORS
0.059
1.5 1.5
50 0.059 0.059 50
PARTICULAR 50 1.969
5.5 0.217 5.5 50 1.969 1.969 5.5 5.5 1.969
USE 0.217 0.217 0.217
SENSORS 2 0.079 2 0.079 2 0.079
28 19 0.748 34.2 34.2
SENSOR 30 1.102 1.346 1.346
OPTIONS 1.181
50 50 50 50
SIMPLE 1.969 K J A’ A A A’ J K 1.969 1.969 K J A A’ A’ A J K 1.969
WIRE-SAVING
UNITS Display Display Display Display
section section section section
WIRE-SAVING N N N N
SYSTEMS
50 50 50 50
86.6 1.969 1.969 86.6 1.969 86.6 1.969
MEASURE- 3.409 M 3.409 M 86.6 3.409 M
MENT 3.409
SENSORS
LASER 19 19 19 19
0.748 38 H 14.5 0.748 0.748 14.5 14.5 0.571 38 0.748
MARKERS 14.5 0.571 38 38 H0.571
1.496 0.571 1.496 1.496 1.496
PLC
HUMAN
Emitter Receiver Emitter Receiver
MACHINE
INTERFACES
ENERGY
MANAGEMENT MS-SFB-3
SOLUTIONS Intermediate supporting Beam First beam
Protective height Mounting
bracket mounting pitch pitch channel position
FA
COMPONENTS
pitch
A’ (Note) Model No.
MACHINE Model No.
VISION
SYSTEMS
A SF4B-F□<V2> J K L M N G H
UV SF4B-A□<V2>
CURING SF4B-H□<V2>
SYSTEMS
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website. FIBER
SENSORS
LASER
SF4B-□G□<V2> It is only available for the robust type SF4B-□G□<V2> Safety light curtain SENSORS
PHOTO-
Assembly dimensions ELECTRIC
SENSORS
Mounting drawing for safety light curtains using the standard mounting brackets MS-SF4BG-1 (optional) and the intermediate MICRO
PHOTO-
supporting brackets. ELECTRIC
SENSORS
<Rear mounting> <Side mounting> AREA
SENSORS
34.5 1.358 55.5 55.5 34.5 1.358 34.5 1.358 34.5 1.358 SAFETY LIGHT
36 1.417 42 2.185 5 2.185 42 36 1.417 5 57 36 1.417 36 1.417 57 CURTAINS /
18 0.709 1.654 5 0.197 0.197 1.654 18 0.709 0.197 55.5 2.244 18 0.709 18 0.709 2.244 55.5 5 0.197 SAFETY
15 0.591 4 4 15 0.591 2.185 4 15 0.591 15 0.591 4 2.185 COMPONENTS
0.158 0.158 0.158 0.158 PRESSURE /
FLOW
10 10 10 10 SENSORS
0.394 0.394 0.394 0.394
5.4 INDUCTIVE
5.4 5.4 0.213 45 5.4 PROXIMITY
45 45 45 SENSORS
6 0.213 0.213 6 1.772 6 1.772 1.772 0.213 6
1.772 0.236 0.236 0.236 0.236
9 9 9 9 PARTICULAR
0.354 0.354 0.354 0.354 USE
46 46 46 46 SENSORS
1.811 1.811 1.811 1.811
6 6.5 6.5 6 0.236 6 0.236 6.5 6.5 6 0.236 SENSOR
0.236 0.256 0.256 5.4 5.4 0.256 5.4 OPTIONS
5.4 0.256
EDCB A 8 0.213 A BCDE 0.213 8 A B CDE E DCB A 0.213
0.213 8 5.4
8
5.4 0.315 0.315 5.4 0.315 0.315 5.4 SIMPLE
0.213 0.213 0.213 WIRE-SAVING
0.213 6
0.236
9
6 0.236 6 0.236 6 0.236 UNITS
9 9 9
G 46
0.354 0.354 46 G 0.354 G G 0.354
L L 46 L L 46
J1.811 1.811J J1.811 1.811J WIRE-SAVING
SYSTEMS
6 6 0.236
0.236 6.5 6.5 6 6.5 6.5 6 0.236
5.4 0.256 0.256 5.4 0.236 0.256 0.256 MEASURE-
F F 5.4 F F 5.4
0.213 8 8 0.213 8 0.213 MENT
M 0.315 0.315 M 0.213 8 0.315 M M 0.315 SENSORS
H K K H H K K H
STATIC
CONTROL
N N DEVICES
5.5 5.5 N N
45 Beam 0.217 0.217 45 5.5 Beam 5.5
pitch 24 0.217 42 1.654 42 1.654 0.217 24 LASER
1.772 57 57 1.772 0.945 pitch 55.5 55.5 0.945
2.244 2.244 2.185 2.185 MARKERS
PLC
Emitter Receiver Emitter Receiver
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
Mounting Total Intermediate supporting
Protective height
pitch length bracket mounting pitch FA
COMPONENTS
Model No.
A (Note) MACHINE
VISION
SYSTEMS
SF4B-F□G<V2> B C D E F G H J K L
SF4B-A□G<V2> UV
SF4B-H□G□<V2> CURING
SYSTEMS
SF4B-F23G<V2> SF4B-H12G□<V2> SF4B-A6G<V2> 220 8.661 200 7.874 244 9.606 279 10.984 313 12.323 334 13.150 - - - - - -
SF4B-F31G<V2> SF4B-H16G□<V2> SF4B-A8G<V2> 300 11.811 280 11.024 324 12.756 359 14.134 393 15.472 414 16.299 - - - - - -
SF4B-F39G<V2> SF4B-H20G□<V2> SF4B-A10G<V2> 380 14.961 360 14.173 404 15.906 439 17.283 473 18.622 494 19.449 - - - - - -
SF4B-F47G<V2> SF4B-H24G□<V2> SF4B-A12G<V2> 460 18.110 440 17.323 484 19.055 519 20.433 553 21.772 574 22.598 - - - - - - Selection
Guide
SF4B-F55G<V2> SF4B-H28G□<V2> SF4B-A14G<V2> 540 21.260 520 20.472 564 22.205 599 23.583 633 24.921 654 25.748 - - - - - - Safety Light
Curtains
SF4B-F63G<V2> SF4B-H32G□<V2> SF4B-A16G<V2> 620 24.409 600 23.622 644 25.354 679 26.732 713 28.071 734 28.898 - - - - - -
Safety
Control Units
SF4B-F71G<V2> SF4B-H36G□<V2> SF4B-A18G<V2> 700 27.559 680 26.772 724 28.504 759 29.882 793 31.220 814 32.047 - - - - - -
Safety
Components
SF4B-F79G<V2> SF4B-H40G□<V2> SF4B-A20G<V2> 780 30.709 760 29.921 804 31.654 839 33.031 873 34.370 894 35.197 441 17.362 - 414 16.299 - 419 16.496 -
SF4B-F95G<V2> SF4B-H48G□<V2> SF4B-A24G<V2> 940 37.008 920 36.220 964 37.953 999 39.331 1,033 40.669 1,054 41.496 521 20.512 - 494 19.449 - 499 19.646 -
SF4D
SF4B-F111G<V2> SF4B-H56G□<V2> SF4B-A28G<V2> 1,100 43.307 1,080 42.520 1,124 44.252 1,159 45.630 1,193 46.968 1,214 47.795 601 23.661 - 574 22.598 - 579 22.795 -
SF4B/
SF4B-F127G<V2> SF4B-H64G□<V2> SF4B-A32G<V2> 1,260 49.606 1,240 48.819 1,284 50.551 1,319 51.929 1,353 53.268 1,374 54.094 681 26.811 - 654 25.748 - 659 25.945 - SF4B-G
SF4B-C
- SF4B-H72G□<V2> SF4B-A36G<V2> 1,420 55.905 1,400 55.118 1,444 56.850 1,479 58.228 1,513 59.567 1,534 60.394 520 20.472 1,001 39.409 493 19.409 974 38.346 498 19.606 979 38.543
SF4C
- SF4B-H80G□<V2> SF4B-A40G<V2> 1,580 62.205 1,560 61.417 1,604 63.150 1,639 64.528 1,673 65.866 1,694 66.693 573 22.559 1,108 43.622 546 21.496 1,081 42.559 551 21.693 1,086 42.756
BSF4-AH80
- SF4B-H88G□<V2> SF4B-A44G<V2> 1,740 68.504 1,720 67.716 1,764 69.449 1,799 70.827 1,833 72.165 1,854 72.992 627 24.685 1,215 47.835 600 23.622 1,188 46.772 605 23.819 1,193 46.968
SF2B
- SF4B-H96G□<V2> SF4B-A48G<V2> 1,900 74.803 1,880 74.016 1,924 75.748 1,959 77.126 1,993 78.464 2,014 79.291 680 26.772 1,321 52.008 653 25.709 1,294 50.945 658 25.906 1,289 50.748
SF2C
Note: In the case of “When used as safety device for presses in China”, the distance between the
center of the first beam axis and the center of the last beam axis of the device becomes the Definition of
Beam pitch First beam protective height (A). For details, refer to “Definition of sensing heights” (p.645).
Sensing Heights
Model No. channel position
M N
SF4B-F□G<V2> 10 0.394 11.8 0.465
SF4B-H□G□<V2> 20 0.787 11.8 0.465
SF4B-A□G<V2> 40 1.575 21.8 0.858
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
537 Safety Light Curtain Type 4
FIBER
SENSORS
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
LASER
SENSORS
SF4B-□G□<V2> It is only available for the robust type SF4B-□G□<V2> Safety light curtain
PHOTO-
ELECTRIC Assembly dimensions
SENSORS
MICRO
PHOTO-
Mounting drawing for safety light curtains using the dead zoneless mounting brackets MS-SF4BG-3 (optional) and the
ELECTRIC
SENSORS
intermediate supporting brackets.
AREA <Rear mounting> <Side mounting>
SENSORS
34.5 55.5 34.5
55.5 55.5 1.358 2.185 55.5 8 1.358
SAFETY LIGHT 2.185 2.185 8 0.315 2.185 0.315
CURTAINS / 42 42 6.7 42 42
SAFETY 1.654 1.654 10.5 0.264 1.654 1.654 6.7
9 6 9 6 0.413 0.264 10.5
COMPONENTS 0.354 0.236 0.354 0.236 6 0.413
9 0.354
0.236 5.4
0.213 5.4 6
PRESSURE / 0.213 0.236
FLOW 9
SENSORS 50.5 0.354 6
1.988 0.236 50.5
1.988
5.4 0.213 5.4
INDUCTIVE 8 8 0.213 C 5.4
PROXIMITY 0.315 0.315 6 5.4
0.213
SENSORS 6.5 6 0.236 6.5 6 0.236 C 0.236 0.213 6.5
0.256 0.256 6 0.256 5.4 6 0.236
6 6 0.236 5.4
0.213 0.213
PARTICULAR 0.236 0.236
46 46 9 0.354 6 46
USE 1.811 1.811 46 0.236 1.811
SENSORS 9 C 9 1.811 9
0.354 0.354 0.354
5.4 5.4
SENSOR 5.4 0.213 C 5.4 0.213 6 0.213 6.5 0.213
C 0.236 8 0.256 C
OPTIONS 8 5.4 0.213
G 8 5.4 0.213
0.315 E A B B A E 0.315 E AB BA 6.5 8 0.315 U
J 0.315 Q 6 E
SIMPLE
6.5
0.256
6 0.236 6.5 6 0.236 0.236 C 0.256 5.4 6 0.236 C
G 0.256 5.4
WIRE-SAVING 6 6 0.213 0.213
0.236 0.236 J 9
UNITS 46 46 0.354 N S 6 46
1.811 9 1.811 46 6 0.236 1.811
9 1.811 0.236 9
0.354 0.354
WIRE-SAVING F 24 5.4
0.354
5.4
SYSTEMS 24
F 0.945
5.4 H 0.945 5.4 0.213 0.213
0.213 H P 6 6.5 0.256
5.4 0.213 D 5.4 8 0.315 R 6
0.213 5.4 Beam 0.213 5.4 0.236 0.236
MEASURE- pitch 5.4 M Beam 5.4
0.213 D 0.213 0.213 pitch T
MENT D D 0.213
9
SENSORS 50.5 0.354 6 50.5
9 5.3 107 K K 9 5.3 107 1.988 9 0.236 1.988
103 103 0.354 K K
STATIC 4.055 0.354 0.209 4.213 L L 4.055 0.209 4.213 0.354 103
4.055
CONTROL 16 16 57 53 48
0.630 0.630 2.244 0.2366 5.4 2.087 5.4 1.890
DEVICES 0.213 0.213
48 34.3 34.3 48 6.7 34.5 6.7
1.890 1.350 1.350 1.890 0.264 1.358 L L 34.3 0.264
LASER 34.5 34.5 34.3 34.3 1.350 8
MARKERS 1.358 1.358 8 1.350 1.350 0.315
( )
68.8 ( )
68.8
0.315
(2.709
68.8 ) (2.709
68.8 )
2.709 2.709
PLC
ENERGY
MANAGEMENT
SOLUTIONS
Mounting Intermediate supporting
Protective height
FA pitch bracket mounting pitch
COMPONENTS
Model No.
MACHINE A (Note)
VISION
SYSTEMS
SF4B-F□G<V2> B C D E F G H J M N P Q R S T U
UV SF4B-A□G<V2>
CURING SF4B-H□G□<V2>
SYSTEMS
SF4B-F23G<V2> SF4B-H12G□<V2> SF4B-A6G<V2> 220 8.661 200 7.874 244 9.606 64.5 2.539 - - - - - - - - - - - - - -
SF4B-F31G<V2> SF4B-H16G□<V2> SF4B-A8G<V2> 300 11.811 280 11.024 324 12.756 144.5 5.689 - - - - - - - - - - - - - -
SF4B-F39G<V2> SF4B-H20G□<V2> SF4B-A10G<V2> 380 14.961 360 14.173 404 15.906 224.5 8.839 - - - - - - - - - - - - - -
Selection
Guide SF4B-F47G<V2> SF4B-H24G□<V2> SF4B-A12G<V2> 460 18.110 440 17.323 484 19.055 304.5 11.988 - - - - - - - - - - - - - -
Safety Light
Curtains SF4B-F55G<V2> SF4B-H28G□<V2> SF4B-A14G<V2> 540 21.260 520 20.472 564 22.205 384.5 15.138 - - - - - - - - - - - - - -
Safety
Control Units SF4B-F63G<V2> SF4B-H32G□<V2> SF4B-A16G<V2> 620 24.409 600 23.622 644 25.354 464.5 18.287 - - - - - - - - - - - - - -
Safety
Components SF4B-F71G<V2> SF4B-H36G□<V2> SF4B-A18G<V2> 700 27.559 680 26.772 724 28.504 544.5 21.437 - - - - - - - - - - - - - -
SF4B-F79G<V2> SF4B-H40G□<V2> SF4B-A20G<V2> 780 30.709 760 29.921 804 31.654 624.5 24.587 414 16.299 - 333 13.110 - 288 11.339 - 289 11.378 - 330 12.992 - 383 15.079 - 347 13.661 -
SF4D
SF4B-F95G<V2> SF4B-H48G□<V2> SF4B-A24G<V2> 940 37.008 920 36.220 964 37.953 784.5 30.886 494 19.449 - 413 16.260 - 368 14.488 - 369 14.528 - 410 16.142 - 463 18.228 - 427 16.811 -
SF4B/
SF4B-G
SF4B-F111G<V2> SF4B-H56G□<V2> SF4B-A28G<V2> 1,100 43.307 1,080 42.520 1,124 44.252 944.5 37.185 574 22.598 - 493 19.409 - 448 17.638 - 449 17.677 - 490 19.291 - 543 21.378 - 507 19.961 -
SF4B-C
SF4B-F127G<V2> SF4B-H64G□<V2> SF4B-A32G<V2> 1,260 49.606 1,240 48.819 1,284 50.551 1,104.5 43.484 654 25.748 - 573 22.559 - 528 20.787 - 529 20.827 - 570 22.441 - 623 24.528 - 587 23.110 -
SF4C
- SF4B-H72G□<V2> SF4B-A36G<V2> 1,420 55.905 1,400 55.118 1,444 56.850 1,264.5 49.783 493 19.409 974 38.346 412 16.220 893 35.157 367 14.449 848 33.386 368 14.488 849 33.425 409 16.102 890 35.039 462 18.189 943 37.126 426 16.772 907 35.709
BSF4-AH80
- SF4B-H80G□<V2> SF4B-A40G<V2> 1,580 62.205 1,560 61.417 1,604 63.150 1,424.5 56.083 546 21.496 1,081 42.559 465 18.307 1,000 39.370 420 16.535 955 37.598 421 16.575 956 37.638 462 18.189 997 39.252 515 20.276 1,050 41.339 479 18.858 1,014 39.921
SF2B
SF2C
- SF4B-H88G□<V2> SF4B-A44G<V2> 1,740 68.504 1,720 67.716 1,764 69.449 1,584.5 62.382 600 23.622 1,188 46.772 519 20.433 1,107 43.583 474 18.661 1,062 41.811 475 18.701 1,063 41.850 516 20.315 1,104 43.465 569 22.402 1,157 45.551 533 20.984 1,121 44.134
Definition of - SF4B-H96G□<V2> SF4B-A48G<V2> 1,900 74.803 1,880 74.016 1,924 75.748 1,744.5 68.681 653 25.709 1,294 50.945 572 22.520 1,213 47.756 527 20.748 1,168 45.984 528 20.787 1,169 46.024 569 22.402 1,210 47.638 622 24.488 1,263 49.724 586 23.071 1,227 48.307
Sensing Heights
Note: In the case of “When used as safety device for presses in China”, the distance between the
center of the first beam axis and the center of the last beam axis of the device becomes the
Beam pitch First beam protective height (A). For details, refer to “Definition of sensing heights” (p.645).
Model No. channel position
K L
SF4B-F□G<V2> 10 0.394 11.8 0.465
SF4B-H□G□<V2> 20 0.787 11.8 0.465
SF4B-A□G<V2> 40 1.575 21.8 0.858
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
538
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website. FIBER
SENSORS
LASER
SF4B-□ Not available for the robust type SF4B-□G□<V2> Safety light curtain SENSORS
Protection bar set MC-SFBH-□ assembly dimensions Protection bar set for rear/side mounting PHOTO-
ELECTRIC
MC-SFBH-□-T assembly dimensions SENSORS
<MC-SFBH-□(L)> <MC-SFBH-□(R)> MICRO
PHOTO-
Rear mounting ELECTRIC
SENSORS
<MC-SFBH-□-T(L)> <MC-SFBH-□-T(R)> AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
D A B C SENSORS
PARTICULAR
C B A D D A B C USE
SENSORS
SENSOR
5 OPTIONS
0.197
10 SIMPLE
0.394 5 5 WIRE-SAVING
0.197 0.197 UNITS
WIRE-SAVING
10 10 SYSTEMS
0.394 43.5 43.5 0.394 10
1.713 1.713 0.394
57.5 57.5 MEASURE-
10 10 MENT
2.264 2.264 10 0.394 0.394 10 SENSORS
46.9 46.9
0.394 1.846 1.846 0.394
60.9 60.9 STATIC
2.398 2.398 CONTROL
72.7 72.7 DEVICES
43 2.862 2.862 43
1.693 1.693 LASER
73.7 73.7 MARKERS
44.2 2.902 2.902 44.2
13 Material: Mounting bracket ···Die-cast zinc alloy 13 1.740 1.740
0.512 Protection bar·········Aluminum 0.512 PLC
Two brackets (one pc. each of R type and L type),
one protection bar HUMAN
Two pcs. each of M5 (length 16 mm 0.630 in) Side mounting MACHINE
INTERFACES
hexagon-socket-head bolts, M5 (length 20 mm 0.787 in)
hexagon-socket-head bolt are attached. <MC-SFBH-□-T(L)> <MC-SFBH-□-T(R)> ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
Model No. Applicable safety light curtain model No. A B C D
MACHINE
230 279 296 250 VISION
MC-SFBH-12(-T) SF4B-F23□<V2> SF4B-H12□<V2> SF4B-A6□<V2> 9.055 10.984 11.654 9.843 SYSTEMS
FIBER
SENSORS
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
LASER
SENSORS RF-SFBH-□ Corner mirror (Optional)
PHOTO-
ELECTRIC
SENSORS 17.5 6 18 0.709 t3
0.689 0.236
6 0.236 t 0.118 Model No. A B C D E F Net weight
MICRO
PHOTO- 236 246 298 272 970 g
ELECTRIC RF-SFBH-12 9.291 9.685 11.732
- -
10.709 approx.
SENSORS
26 13 29
316 326 378 352 1,170 g
AREA 1.024 0.512 1.142 RF-SFBH-16 12.441 12.835 14.882
- -
13.858 approx.
SENSORS t 3 t 0.118
396 406 458 432 1,370 g
SAFETY LIGHT RF-SFBH-20 15.591 15.984 18.031
- -
17.008 approx.
CURTAINS /
SAFETY 80 476 486 538 512 1,570 g
COMPONENTS 3.150 RF-SFBH-24 18.740 19.134 21.181
- -
20.157 approx.
PRESSURE /
Effective ø8.5
reflective 29 556 566 618 592 1,770 g
FLOW 1.142 ø0.335 RF-SFBH-28 - -
SENSORS surface 18 21.890 22.283 24.331 23.307 approx.
ABC 0.709 F
17.5 6 636 646 698 672 1,970 g
6
INDUCTIVE
PROXIMITY
0.689 0.236
0.236 RF-SFBH-32 25.039 25.433 27.480
- -
26.457 approx.
SENSORS
716 726 778 752 2,170 g
E RF-SFBH-36 28.189 28.583 30.630
- -
29.606 approx.
PARTICULAR 26 13
USE 1.024 0.512 796 806 858 458 ±50 832 2,660 g
SENSORS RF-SFBH-40 31.339 31.732 33.779 18.031 ±1.969
-
32.756 approx.
D
SENSOR 956 966 1,018 538 ±50 992 3,060 g
OPTIONS
ø8.5 RF-SFBH-48 37.638 38.031 40.079 21.181 ±1.969
-
39.055 approx.
ø0.335
1,116 1,126 1,178 618 ±50 1,152 3,460 g
SIMPLE RF-SFBH-56 43.937 44.331 46.378 24.331 ±1.969
-
45.354 approx.
WIRE-SAVING
UNITS
106
72 2.835 (46
1.811 ) RF-SFBH-64 1,276
50.236
1,286
50.630
1,338
52.677
698 ±50
27.480 ±1.969
- 1,312
51.653
3,890 g
approx.
WIRE-SAVING 4.173
1,436 1,446 1,498 538 ±50 1,018 ±50 1,472 4,550 g
SYSTEMS 64 RF-SFBH-72 56.535 56.929 58.976 21.181 ±1.969 40.079 ±1.969 57.953 approx.
2.520 45°
MEASURE- 1,596 1,606 1,658 591 ±50 1,125 ±50 1,632 4,950 g
RF-SFBH-80
MENT
SENSORS (4.219
109 ) 62.835 63.228 65.275 23.268 ±1.969 44.291 ±1.969 64.252 approx.
1,756 1,766 1,818 645 ±50 1,231 ±50 1,792 5,350 g
STATIC RF-SFBH-88 69.134 69.527 71.575 25.394 ±1.969 48.464 ±1.969 70.551 approx.
CONTROL
DEVICES 28
46
1.811 (4.094
104 )
1,916 1,926 1,978 698 ±50 1,338 ±50 1,952 5,750 g
1.102 < When mounting at an angle of 45° > RF-SFBH-96 75.433 75.827 77.874 27.480 ±1.969 52.677 ±1.969 76.850 approx.
LASER
MARKERS
MS-SFB-1 Standard mounting bracket (Optional) MS-SFB-1-T M8 mounting bracket (Optional)
PLC Not available for the robust type SF4B-□G□<V2> Not available for the robust type SF4B-□G□<V2>
8.4 0.331 8.4 0.331
HUMAN 3
0.118 8 0.315
MACHINE
INTERFACES 8 0.315 R4.1 R0.161 (for sensor mounting)
24.5
33 3 R 0.965
ENERGY 20 15 24.5 1.299 0.118
MANAGEMENT 28 0.787 0.591
SOLUTIONS 1.102 0.965
R
FA 4-R2.8 R0.110 10 10
5 0.197 8.2 0.394
COMPONENTS 0.323 0.394
5.5 0.217 5.5 0.217
MACHINE 18 28
VISION 0.709 1.102 R8.5 R0.335
SYSTEMS 28
R8.5 R0.335 60° M5 (length
1.102 6 0.236)
UV M5 (length 30°
CURING 60° 6 0.236) 10.8 6.2
SYSTEMS 30° M5 (length 15 0.425 0.244
10.8 6.2 14 0.551) 0.591
M5 (length 0.425 0.244
15 0.591
14 0.551)
R18.4 28
27.4 1.102 6.1 8.1
28 R0.724
R18.4 R0.724 6.1
1.079 8.7 0.240 0.319
1.102 8.1 R16.6 0.343
0.240 0.319 14 9.6
Selection R16.6 R0.654 8.7 R0.654
Guide 9.6 0.551 3 29 11 0.378
14 0.343 28
0.378 0.118 1.142 M5 0.433
Safety Light 0.551 3 0.118 11 1.102
Curtains 28 M5 0.433
Safety 1.102
Control Units
Safety Material: Die-cast zinc alloy
Components Material: Die-cast zinc alloy
Four bracket set
Four bracket set Four M5 (length 18 mm 0.709 in)
Four M5 (length 18 mm 0.709 in) hexagon-socket-head bolts are attached.
SF4D hexagon-socket-head bolts are attached.
SF4B/
SF4B-G
MS-SF4BG-1 Standard L mounting bracket (Optional)
SF4B-C
34.5 It is only available for the
SF4C 1.358 robust type SF4B-□G□<V2>.
17.5
0.689 5 0.197
BSF4-AH80
10 5.5 0.217
0.394
SF2B
SF2C 15 18 36
0.591 0.709 1.417
Definition of
Sensing Heights
40° Material: SPHC
2 ø25 Four bracket set
0.079 ø0.984 Eight M5 (length: 10
mm 0.394 in)
40° hexagon-socket-head
55.5 bolts are attached.
2.185
ø9.8 34.5 5.2
ø0.386 1.358 0.205
45
1.772
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
540
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website. FIBER
SENSORS
LASER
MS-SFB-2 Not available for the robust type SF4B-□G□<V2> Intermediate supporting bracket (Accessory for safety light curtain) SENSORS
PHOTO-
ELECTRIC
9.5 SENSORS
0.374
5.8 MICRO
0.228 PHOTO-
ELECTRIC
SENSORS
AREA
M4 22.2 SENSORS
40 1.575 0.874
(length 13 0.512
37 1.457 12 0.472) SAFETY LIGHT
12 8.3 0.327 8.5 CURTAINS /
0.472 0.335 SAFETY
2 0.079 COMPONENTS
30° R21.4 R0.843
4-R2.8 PRESSURE /
0.110 FLOW
SENSORS
(2.165
55
) 43 2
0.079
(1.220
31
) (1.102
28
) 52
2.047 41 INDUCTIVE
1.693 1.614 PROXIMITY
SENSORS
15 12.5
0.591 0.492 PARTICULAR
5.5 0.217 5.5 13 USE
9 0.217 2 10.5 SENSORS
33 1.299 0.512
0.354 50 1.969 0.079 0.413
Note: T
he intermediate supporting bracket (MS-SFB-2) is enclosed SENSOR
60 2.362 OPTIONS
32 with the following products. The quantity differs depending on
1.260 4-R2.8 the product as shown below: SIMPLE
R0.110 WIRE-SAVING
2 0.079 1 set: S F4B-F□<V2> … 79 to 111 beam channels UNITS
24.8 SF4B-H□<V2> … 40 to 56 beam channels
0.976 14.8
0.583 SF4B-A□<V2> … 20 to 28 beam channels WIRE-SAVING
5.5 5.5 SYSTEMS
2 sets: S F4B-F127□<V2>
8.8 0.217 0.217
0.346 50 1.969 SF4B-H□<V2> … 64 to 80 beam channels MEASURE-
SF4B-A□<V2> … 32 to 40 beam channels MENT
SENSORS
3 sets: S F4B-H□<V2> … 88 to 96 beam channels
Material: Die-cast zinc alloy SF4B-A□<V2> … 44 to 48 beam channels STATIC
CONTROL
DEVICES
LASER
MARKERS
MS-SF4BG-2 It is only available for the robust type SF4B-□G□<V2> Intermediate supporting bracket (Accessory for safety light curtain)
PLC
Rear mounting Side mounting
HUMAN
MACHINE
18 18 INTERFACES
0.709 8 0.709 8
ø5.4 ø0.213 ENERGY
0.315 0.315 MANAGEMENT
mounting hole 5.4 5.4
SOLUTIONS
0.213 0.213
FA
23 56 23 56 COMPONENTS
0.906 8 2.205 0.906 8 2.205
0.315 32 0.315 32 MACHINE
1.260 1.260 VISION
SYSTEMS
9 9
10 0.354 10 0.354 UV
5.4 5.4 CURING
0.394 0.213 0.394
0.213 SYSTEMS
10.5 10.5
0.413 ø5.4 ø0.213 9 0.413
26.5 9 26.5
1.043 mounting hole 0.354 1.043
0.354 10
10
0.394 0.394
(51.5) Selection
43 (46.1) 43 Guide
34.5 1.693 (1.815) 34.5 1.693 (2.028)
1.358 18 18 1.358 Safety Light
0.709 0.709 Curtains
Safety
34.5 34.5 Control Units
1.358 1.358
Safety
43 43 Components
1.693 1.693
(51.5) (46.1) Material: C
old rolled carbon steel
(2.028) (1.815) (SPCC)
Supporting bracket ··· PPS SF4D
SF4B/
SF4B-G
SF4B-C
FIBER
SENSORS
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
LASER
SENSORS MS-SFB-3 Not available for the robust type SF4B-□G□<V2> Dead zoneless mounting bracket (Optional)
PHOTO-
ELECTRIC
SENSORS Main body
MICRO
PHOTO-
ELECTRIC
SENSORS 4-R4 2-R4 4-R2.8
2-R3.3 5.5 5.5
6.8 R0.157 R0.130 R0.157 R0.110 26
AREA 0.268 0.217 1.024 0.217
SENSORS 2-M5
SAFETY LIGHT 19
CURTAINS /
SAFETY 0.748 15 10.8
50 41.2 25 0.591 0.425 38
COMPONENTS 1.969 1.622 0.984 1.496
PRESSURE /
FLOW 4 0.157 5.5
SENSORS M4
(length 0.217
INDUCTIVE 9.5 0.374 10 0.394) 2 0.079 5.5
PROXIMITY 39 1.535 8.5 0.335 0.217
SENSORS
51 2.008 11.6 0.457 3 3
PARTICULAR 59.5 2.343 12 0.472 0.118 26 0.118
USE 68 2.677 1.024
SENSORS
2-M5
Spacer
SENSOR
OPTIONS 26
Material: Die-cast zinc alloy 1.024 17.3 13 3-R1 R0.039
9.5
0.681 0.512
SIMPLE Four bracket set 0.374
WIRE-SAVING 12 2-R3 R0.118 8.4 0.331 R3
UNITS Four M5 (length 25 mm 0.984 in) 9 4.5 0.472 R0.118
hexagon-socket-head 0.354 0.177 20 0.787 ø5.5 ø0.217 8.4
WIRE-SAVING bolts and four spacers are attached. 59.5 2.343
SYSTEMS 0.331
HUMAN
MACHINE
INTERFACES
MACHINE
MS-SF4BG-3 Dead zoneless mounting bracket (Optional) MS-SFB-4 Pitch adapter bracket (Optional)
VISION
SYSTEMS It is only available for the robust type SF4B-□G□<V2>. Not available for the robust type SF4B-□G□<V2>
Main body 8.4
UV
CURING 0.331
SYSTEMS 68.8 2.709
58.5 2.303 8 0.315
42.5 1.673
34.5 1.358 3
26.5 1.043 0.118
25 10.5
0.413 63.5 18
0.984 2.500 69
5.4 5.4 7 0.709
Selection 0.213 0.213 74.5 2.717
Guide 2.933 0.276 45.5
1.791
Safety Light 85.5 (Sliding range)
Curtains 3.366
Safety Material: Die-cast zinc alloy
Control Units 26
1.024 13
Safety Four bracket set
Components
0.512
4-R2.8 R0.110 Four M5 (length 18 mm 0.709 in)
5.5 10 18 hexagon-socket-head bolts are
60.5 2.382 ø5.4 ø0.213 0.217 0.394 0.709 attached.
50.7 1.996 62.6 2.465 28
SF4D 66.7 2.626 1.102
9 0.354 R8.5 R0.335
9.5 0.374 t 3.2
SF4B/ t 0.126 M5 (length
SF4B-G 60° 6 0.236) 6.1
5.4 30°
0.213 5.4 20° 20° 10.8 0.240 6.2
SF4B-C 43.2 0.213 0.425 0.244
1.701 M5 (length 15
10° 10° 34.5 0.591
SF4C 26.5 14 0.551)
18.1 1.358
1.043
0.713 28
BSF4-AH80
R18.4 R0.724 1.102 8.1
8 0.315 0.319
SF2B 10.5 10.5 40° 8.7
52.5 2.067 R16.6 R0.654 0.343
0.413 0.413 60°
14 9.6
SF2C Material: Dead zoneless mounting bracket ··· Cold rolled carbon steel (SPCC) 0.551 4.7 0.378
28 0.185 M5 11
Definition of (Trivalent chrome plated) 0.433
1.102
Sensing Heights Dead zoneless supporting bracket ··· PPS
hexagon-socket-head bolts
[M5 (length 8 mm 0.315 in)]
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
542
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website. FIBER
SENSORS
LASER
MS-SFB-4-T Not available for the robust type SF4B-□G□<V2> M8 pitch adapter bracket (Optional) SENSORS
PHOTO-
8.4 ELECTRIC
0.331 SENSORS
8 0.315 MICRO
PHOTO-
ELECTRIC
SENSORS
3
0.118 AREA
63.5 18 SENSORS
69
78 2.500 7 0.709 2.717 SAFETY LIGHT
85.5 3.071 0.276 45.5 CURTAINS /
3.366 1.791 SAFETY
(Sliding range) COMPONENTS
10
0.394 PRESSURE /
Material: Die-cast zinc alloy FLOW
SENSORS
Four bracket set
2-R5 R0.197 Four M5 (length 18 mm 0.709 in) INDUCTIVE
10 PROXIMITY
hexagon-socket-head bolts are attached. SENSORS
0.394
28 PARTICULAR
1.102 R8.5 R0.335 USE
M5 (length SENSORS
60° 6 0.236)
30° SENSOR
10.8 6.2 OPTIONS
M5 (length 15 0.425 0.244
14 0.551) 0.591 SIMPLE
WIRE-SAVING
UNITS
28 6.1
R18.4 R0.724 1.102 8.1
0.240 0.319 WIRE-SAVING
8.7
R16.6 R0.654 0.343 9.6 SYSTEMS
14 0.378
0.551 4.7 11
M5 MEASURE-
28 0.185 0.433 MENT
1.102 SENSORS
STATIC
CONTROL
DEVICES
MS-SFB-7-T MS-SFB-1-T2 (Rear mounting) M8 rear mounting bracket (Optional) M8 rear/side mounting brackets set (Optional) LASER
MARKERS
Not available for the robust type SF4B-□G□<V2>
8.5
0.335 PLC
28 29
(R0.795
R20.2
) UV
CURING
SYSTEMS
1.102 M5
1.142
M5
10.75
0.423
10.75
0.423 M5
Mounting adjustment range SF4D
8 8 SF4B/
4 0.157 0.315 0.315 4 0.157
SF4B-G
SF4B-C
10 10
15° 15° The adjustment
(40.6
) 29
1.598 1.142
0.394 0.394 29
(
40.6
1.142 1.598 ) range of the safety SF4C
light curtain angle is BSF4-AH80
up to ±15 degrees.
10 2-R5 R0.197 2-R5 R0.197 10 SF2B
7.6 0.394 0.394 7.6
0.299 0.299
(28.35
) (28.35
) SF2C
(
14.75
0.581 )
1.116 1.116
(
14.75
0.581 ) (R0.795
R20.2
) Definition of
Sensing Heights
M5 (length
10 0.394)
M5 (length
10 0.394)
(1.811
28
)
33.5 33.5 Material: Cold ralled carbon steel (SPCC)
1.319 1.319 (Trivalent chrome plated)
Four bracket
(two pcs. each of R type and L type) set
28 2.3 2.3 28 Four M5 (length 18 mm 0.709 in)
1.811 0.091 0.091 1.811 hexagon-socket-head bolts are attached.
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
543 Safety Light Curtain Type 4
FIBER
SENSORS
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
LASER
SENSORS SF-C11 Control unit (Optional) SF-C12 Control unit (Optional)
PHOTO-
ELECTRIC
SENSORS 127
2-ø6 ø0.236 5.000
MICRO
PHOTO- 2-ø10 ø0.394 80 67.5
ELECTRIC 3.150 2.657
SENSORS 6 30
7 0.276 0.236 6.5
54.1 46 1.181 0.256
AREA 2.130 1.811 21
SENSORS
40 13 23 8 0.315 0.827
SAFETY LIGHT 4 1.575 0.512 0.906
11.5
CURTAINS / 0.157 0.453
SAFETY 28 130
COMPONENTS 25 Receiver 114 5.118 81.4
35 0.984 1.102
PRESSURE /
FLOW
1.378
67.3
48.8
1.921
side
connector
4.488 8
0.315 (5.315)
135 3.205
SENSORS 2.650
3 × 6 = 18 Emitter side
INDUCTIVE 130 3 × 0.236 = 0.709 connector
PROXIMITY 5.118
SENSORS 6
0.236 6
PARTICULAR
USE 19.5 0.236
SENSORS 0.768
22 24.5 30.5
SENSOR 0.866 0.965 1.201
OPTIONS 10 80
0.394 6.5 3.150
SIMPLE
WIRE-SAVING
0.256
(
100
3.937 )
UNITS 36.5 34.2 36.5
Suitable for 35 mm 1.378 in width DIN rail 1.437 1.346 1.437
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS SF-C13 Control unit (Optional) SF-C14EX(-01) Application expansion unit (Optional)
STATIC
CONTROL
DEVICES
LASER 6.75
MARKERS 5 6 46
4 0.266 0.236
0.197 1.811
0.157
54.1 38.4 1.512 Receiver
PLC 35 34.5 2.130 Emitter side 18 18.4 side
1.378 1.358 40 connector 0.709 0.724 connector
67.3 1.575 23 0.906
HUMAN 2.650 3 × 5 = 15 4 0.157
MACHINE
INTERFACES 3 × 0.197 = 0.591 25
130 35 34.1 31.1
1.378 0.984 1.343 1.224
ENERGY 5.118
91.6 67.3 13
MANAGEMENT
SOLUTIONS 3.606 2.650 0.512
130 11
FA 0.433
COMPONENTS 5.118
MACHINE 10 80 13 5
VISION 0.394 3.150 0.512 0.197
SYSTEMS 6.5 22.5
13.5 0.256 80.8
0.531 3.181 0.886
UV
CURING Suitable for 35 mm 1.378 in width DIN rail 10 80
SYSTEMS 0.394 3.150
6.5
0.256
(
99
3.898 )
Suitable for 35 mm 1.378 in width DIN rail
Selection
Guide
Safety Light SFB-HC Handy-controller (Optional) SFB-WY1 Y-shaped connector (Optional)
Curtains
Safety 65 2.559
Control Units 30
Safety 1.181
Components
25.4
SF4D 23 1.000 ø6 ø0.236 cables, 66 2.598
22.5
0.906 0.5 m 1.640 ft long 0.886
SF4B/
SF4B-G 13.5 41
0.531 1.614
SF4B-C
SF4C
ø9 ø14 45.8 31
BSF4-AH80 FUNCTION
ø0.354 ø0.551 1.803 1.220
SF2B
140
5.512
SF2C
Definition of CANCEL ENTER
Sensing Heights
SF4B SERIES Ver.2 SF4B-G SERIES Ver.2
Safety Light Curtain Type 4
544
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website. FIBER
SENSORS
LASER
SF-LAT-2N Laser alignment tool (Optional) SF-LAT-4BG Laser alignment tool (Optional) SENSORS
Not available for the robust type SF4B-□G□<V2> It is only available for the robust type SF4B-□G□<V2>. PHOTO-
ELECTRIC
SENSORS
ø12
(0.827
21
) 0.874
22.2 (21) 22
(0.827) 0.866 MICRO
PHOTO-
ø0.472 ELECTRIC
SENSORS
28 48
28 38 1.102 1.890
1.102 1.496 AREA
SENSORS
Center of beam axis
ø12
ø0.472 SAFETY LIGHT
Center of beam axis 66.5 18.75 5.3 66.5 CURTAINS /
31 15.8 SAFETY
2.618 0.738 0.209 1.220 2.618 0.622
1 0.039 COMPONENTS
PRESSURE /
FLOW
28 SENSORS
1.102
20 48 20 62 INDUCTIVE
0.787 1.890 0.787 2.441 PROXIMITY
SENSORS
92 92
3.622 3.622 PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SF-IND-2 Large display unit for safety light curtain (Optional) SYSTEMS
MEASURE-
MENT
22.8 SENSORS
0.898
18.3 STATIC
0.720 CONTROL
DEVICES
25
35.5 0.984 LASER
MARKERS
40.1 1.398 23
1.579 0.906
PLC
UV
CURING
SYSTEMS
Selection
Guide
Safety Light
Curtains
Safety
Control Units
Safety
Components
SF4D
SF4B/
SF4B-G
SF4B-C
SF4C
BSF4-AH80
SF2B
SF2C
Definition of
Sensing Heights