Professional Documents
Culture Documents
MAR. 2013
LK-127
CONTENTS
SPECIFICATIONS............................................................................................ 1
PCB INFORMATION........................................................................................ 3
CIRCUIT DESCRIPTION................................................................................. 4
DISASSEMBLY................................................................................................ 7
DIAGNOSTIC PROGRAM............................................................................. 16
EXPLODED VIEW.......................................................................................... 22
PARTS LIST................................................................................................... 23
SCHEMATIC DIAGRAMS.............................................................................. 27
LK-127
SPECIFICATIONS
–1–
LK-127
CN4
DB4~DB7 LCD
CONTROLLER
IC3
CN5
KI0S~KI7S,
KO8S~KO11S
BUTTONS CN9
RSP-
RSP
VD5 VA5 VE5 RSP+
CN8 RIGHT
SPEAKER
CN3 (17 pin) CN7 CN6
D202
POWER
VCP VD5 VA5 VC VE5 AMPLIFIER
IC201
VCP
POWER SUPPLY
POWER OFF CIRCUIT
CIRCUIT Q202, Q203, Q204, CN203 (+) BATTERY
Q201 D206, D207,
C225-C229 DC 9 V CN202 (-)
(J201)
POWER & AMP PCB (M820-PSA1)
–2–
LK-127
PCB INFORMATION
M800-KYA1 M820-PSA1 M821-MDA1 M800-KYA2
M821-LDA1 M821-LDA2
–3–
LK-127
CIRCUIT DESCRIPTION
Nomenclature of Keys
C2 C3 C4 C5 C6 C7
Key Matrix
Button Matrix
–4–
LK-127
–5–
LK-127
–6–
LK-127
DISASSEMBLY
About Repair
• The photos show a prototype. The appearance of the instrument, such as color, may differ
from the actual model.
• To avoid damages to the instrument and floor, lay the instrument on a mattress or blanket
before starting disassembling.
• There are several kinds of screws. Be sure to use the correct type of screws when
reassembling. It is advisable to sort the screws as shown below after removing them.
• If a screw cap is attached to the screw, remove it. Be sure to reattach the screw cap when
assembling.
• Check how cables are wired before removing cables. Be sure to wire the cables in the same
manner as they were before disassembly.
• In case cables are secured with cable ties, securing bands, clips, or tapes, remove them first.
Be sure to secure the cables in place in the same manner as they were before disassembly.
Flowchart
Assembled Product
D. SPEAKER
E. KEY
F. PCB UNIT/KYA
G. PCB UNIT/LDA
PCB UNIT/LD3
PCB UNIT/LD4
PCB UNIT/LD5
–7–
LK-127
Disassembly Procedure
A-2. When replacing the keyboard LED PCB, undo 16 screws and then remove the LOWER COVER.
<Notes on Assembly>
• To install the LOWER COVER, tighten the screws indicated with arrows engraved on each
cover first.
–8–
LK-127
A-4. Unsolder two battery lead wires and two ribbon cables.
Lead wire (Black) Ribbon cable (KYA2 PCB) Ribbon cable (LDA2 PCB)
–9–
LK-127
B-4. Undo 16 screws and then remove the PCB UNIT/MAIN, four RUBBER KEY, and LCD components.
– 10 –
LK-127
<Notes on Assembly>
• To install the MDA1 PCB, tighten the screws for the LCD part in the order shown in the right.
If not tighten correctly, it may cause the LCD display errors.
3 1 6 MDA1 PCB
4 2 5
C-1. Unsolder two lead wires and one ribbon cable from the MDA1 PCB.
– 11 –
LK-127
C-3. Undo eight screws and then remove the PCB UNIT/POWER & AMP, two RUBBER KEY, and two
CONTACT/SLIDE SWITCH.
– 12 –
LK-127
E. KEY
E-1. Undo eight screws and then remove two SIDE PANEL.
– 13 –
LK-127
F-1. Disengage the hooks and then remove the PCB UNIT/KYA.
– 14 –
LK-127
G-3. Unsolder three ribbon cables from the LDA1 and LDA2 PCB.
G-4. Undo 12 screws on the LD3, LD4, and LD5 PCB and then remove the PCB UNIT/LDA, PCB UNIT/
LD3, LD4, and LD5.
NOTE: After repairing, arrange the ribbon cables again.
Ribbon cable (LD3 PCB) Ribbon cable (LD4 PCB) Ribbon cable (LD5 PCB)
– 15 –
LK-127
DIAGNOSTIC PROGRAM
Preparation
(2) Adjust the main volume so that it is at about 1/3 of the full volume.
(1) Hold down the “0” and “START/STOP” buttons at the same time, to turn the power ON.
NOTE: Set the mode switch to the “NORMAL”.
NOTE: Be sure to turn OFF the power when the test is finished.
– 16 –
LK-127
Test Items
B. Button Check 0
G. Key Check
– 17 –
LK-127
Test Procedure
A-1. Switch the mode switch and then check that the following screen appears.
FINGERED
CASIO CHORD
NORMAL
– 18 –
LK-127
B. Button Check
B-2. Press the buttons in the order shown in the figure below.
03 04 07 08 09 15 17
14 16 18
23 21 19
22 20
01 02 05 06 10 11 12 13 24 25 26
B-3. When press the “SPEAK” button at the end, check that the confirmation tone sounds and also that
the following screen appears.
C-1. When you press the “1” button, the ROM version appears as shown below.
<Example>
– 19 –
LK-127
10 11 12 13 14 15 16 17 18 19
1 2 3 4 5 6 7 8 9
E. LCD Check
E-1. Press the “STEP 1” button to perform the “LCD Check” and then check that the confirmation tone
sounds and also that all segments are lit.
E-2. Press the “STEP 2” button and then check that the confirmation tone sounds and also that all
segments are turned OFF.
– 20 –
LK-127
F-1. Press the “PART SELECT” button to perform the “Auto Power OFF Check”.
F-2. Check that the power supply is turned OFF and no screen appears.
NOTE: After checking, be sure to turn the mode switch to “OFF”.
G. Key Check
H. Headphones check
H-2. Press any key and then check that you can hear the sound through the headphones.
H-4. Press any key and then check that sounds come out from the speakers.
– 21 –
LK-127
EXPLODED VIEW
17 31
33
18
12
30
29
21 22 11
23 28
20
27
26
19
14
25
30 24
13
1
2 10
35 9
32
36 8
34 38
38
6
43
16
43 37 15
48
42 39
40 41
4
47 5
46
5
45
44
3
– 22 –
LK-127
PARTS LIST
LK-127
Notes:
1. Prices and specifications are subject to change
without prior notice.
2. Refer to the latest “Parts Price Code” at
“PARTS FINDER” on the Casio Service WEB site
(https://www.servicecasio.com).
3. As for spare parts order and supply, refer to
the “GUIDEBOOK for Spare Parts Supply”,
published separately.
4. The numbers in item column correspond to
the same numbers in drawing.
– 23 –
LK-127
1: LK-127_DI
2: LK-127_EU
3: LK-127_US
Q'ty
N Item Code No. Parts Name Specification R Remarks
1 2 3
MAIN PCB
1 10368210 PCB UNIT/MAIN TK-RJM510419*001 1 1 1 B MDA1
CN8 10178633 WIRE/BLUE 1007TASC24100B4040 1 1 1 X for Speaker (+)
CN9 10366747 WIRE/WHITE 1007TASC24100W4040 1 1 1 X for Speaker (-)
VR1 69304870 VARIABLE RESISTOR EVND8AA03B53 1 1 1 X for LCD contrast
D1-D8 10276977 DIODE L1SS400T1G 8 8 8 X
IC4 10240586 IC XC6109N40ANR 1 1 1 X
IC1 10363062 LSI ML6756B32GAZ03A114 1 1 1 C
IC3 10222381 LSI ST7066U-0A-QG 1 1 1 C
IC2 10159709 LSI UPD65881GK-1019ETA 1 1 1 C
Q9 69300298 TRANSISTOR 2SC4081T106R 1 1 1 X
Q5-Q8 10209018 TRANSISTOR KTA501U-GR-RTK/P 4 4 4 X
Q1-Q4 10207076 TRANSISTOR KTC601U-GR-RTK/P 4 4 4 X
TH1 10138692 THERMISTOR NCP18XH103J03RB 1 1 1 X
X1 10070555 RESONATOR CSTCW20M0X51-R0 1 1 1 X
– 24 –
LK-127
1: LK-127_DI
2: LK-127_EU
3: LK-127_US
Q'ty
N Item Code No. Parts Name Specification R Remarks
1 2 3
KEYBOARD PCB
3 10368208 PCB UNIT/KYA TK-RJM508609*002 1 1 1 C KYA1/KYA2
D801-D830,D832 10301580 DIODE LM1MA142WAT1G 31 31 31 X
4 69261580 SPONGE/35X150 M440499-1 1 1 1 X
5 69268840 FABRIC TAPE/4X10 M440684-1 3 3 3 X
6 10368212 PCB UNIT/LDA TK-RJM510423*001 1 1 1 C LDA1/LDA2, for White key
D501-D536 10302396 LED 1154SURDKB5/7.5-90 36 36 36 X
7 10263729 SPONGE/43X180 M441123-001V01 1 1 1 X
N 8 10453355 PCB UNIT/LD3 TK-M240428*012 1 1 1 C LD3, for Black key
LED451-LED458 10302396 LED 1154SURDKB5/7.5-90 8 8 8 X
N 9 10453356 PCB UNIT/LD4 TK-M240429*012 1 1 1 C LD4, for Black key
LED459-LED466 10302396 LED 1154SURDKB5/7.5-90 8 8 8 X
N 10 10453357 PCB UNIT/LD5 TK-M240430*012 1 1 1 C LD5, for Black key
LED467-LED475 10302396 LED 1154SURDKB5/7.5-90 9 9 9 X
KEYBOARD UNIT
11 10304700 WHITE KEY/CB TK-RJM507243*003 4 4 4 C
12 10304699 WHITE KEY/CS TK-RJM507244*003 1 1 1 C
13 10301442 BLACK KEY/10P RJM506595-009V02 2 2 2 C
14 10301443 BLACK KEY/5P RJM506595-010V02 1 1 1 C
15 10163902 RUBBER CONTACT/CB RJM503854-001V01 4 4 4 B
16 10163903 RUBBER CONTACT/CS RJM503855-001V01 1 1 1 B
PANEL UNIT
N 17 10451540 PLATE/DISPLAY RJM510316-006V02 1 1 1 X
18 10301435 KNOB/SLIDE SWITCH RJM503803-009V01 2 2 2 X
19 69095890 CONTACT/SLIDE SWITCH CSB-12D 2 2 2 X
20 10417026 FABRIC TAPE RJM511849-001V01 1 1 1 X
21 10417025 FABRIC TAPE RJM511833-001V01 1 1 1 X
22 10272509 LCD SDT-M4396-RP-0 1 1 1 X
23 10366853 RUBBER CONNECTOR RJM510317-001V01 2 2 2 X
N 24 10451350 RUBBER KEY/A RJM510262-003V01 1 1 1 X
N 25 10451351 RUBBER KEY/B RJM510264-003V01 1 1 1 X
– 25 –
LK-127
1: LK-127_DI
2: LK-127_EU
3: LK-127_US
Q'ty
N Item Code No. Parts Name Specification R Remarks
1 2 3
N 26 10451352 RUBBER KEY/C RJM510282-009V01 1 1 1 X
N 27 10451353 RUBBER KEY/D RJM510283-003V01 1 1 1 X
N 28 10451354 RUBBER KEY/E RJM510284-003V01 1 1 1 X
N 29 10451355 RUBBER KEY/F RJM510285-002V01 1 1 1 X
30 10264808 SPEAKER C10J01A 2 2 2 X
N 31 10451349 PANEL RJM510265-010V01 1 1 1 X
N 32 10451337 SIDE PANEL/LEFT RJM510267-002V01 1 1 1 X
N 33 10451338 SIDE PANEL/RIGHT RJM510268-002V01 1 1 1 X
ACCESSORY
- 10366857 MUSIC STAND RJM510426-001V01 1 1 1 C
– 26 –
LK-127
SCHEMATIC DIAGRAMS
MAIN PCB: M821-MDA1
(to PSA1CN201)
(to LDA2/CN506)
(to KYA2/CN803)
RIGHT SPEAKER
(to PSA1/CN206)
(to PSA1/CN207)
(to RIGHT SPEAKER) : Not used
– 27 –
LK-127
(to BATTERY) DC 9 V IN
(J201) PHONES/OUTPUT
(J202)
(to MDA1/CN6)
(to MDA1/CN7)
(to MDA1/CN3)
POWER/MODE
SWITCH
(SW201)
(to KYA2/CN803)
VOLUME
(SW202)
: Not used
– 28 –
LK-127
: Not used
: Not used
(to KYA2/
CN802)
– 29 –
LK-127
– 30 –
LK-127
– 31 –
LK-127
– 32 –
CASIO COMPUTER CO., LTD.
CS Technical Department
TOKYO, JAPAN