Professional Documents
Culture Documents
2008 GENERAL INFORMATION Steering System - General Information - Escape & Mariner
1. Place the vehicle on a flat level surface with the transmission in PARK.
2. Place the steering wheel in the straight ahead position and remove hands from the wheel.
3. Connect the scan tool to the vehicle.
4. Turn the ignition key to the RUN position.
5. Using the scan tool, select ESP sensor calibration and follow the scan tool instructions.
6. Clear any power steering control module DTCs.
NOTE: After turning the ignition key to the OFF position, wait at least 25 seconds
before carrying out any procedures that require the battery to be
disconnected or module memory loss may occur.