Professional Documents
Culture Documents
The main responsibility of a safety officer is keeping employees, the company, and the
surrounding community safe from safety and environmental hazards. The
responsibilities of the safety officer are clearly defined under Department Order 198-18,
Section 14.
TRUE FALSE
#2 : MULTIPLE CHOICE
Any man-made cut, cavity or depression in an earth surface that is formed by earth
removal.
Confine space Crane Machine safety Excavation
#3 : MULTIPLE CHOICE
Supervisor Mark explains about the LOTO practice as an important policy. Which of
these statements should be not be part of his explanation?
Equipment identified for maintenance are added a visual lock and tag to the energy
isolation points. In the construction industry, the LOTO practice is optional and a
prerogative of the OSH committee. The lock and tag creates a barrier to prohibit
usage In LOTO, the worker is protected from sudden uncontrolled release of
hazardous energy during isolation and or maintenance.
#4 : MULTIPLE CHOICE
These guidelines are followed when the system's energy is locked out during LOTO
except;
Locks can only be removed by those who installed them Each lock may have
more than one key. There can be as many locks on the system according to the
number of workers who shall do the task Verify the system is properly locked out
before beginning the work.
#5 : TRUE OR FALSE
Body harnesses are designed to minimize stress forces on an employee's body in the
event of a fall, while providing sufficient freedom of movement to allow work to be
performed.
TRUE FALSE
#6 : MULTIPLE CHOICE
entitled "An Act Strengthening Compliance with Occupational Safety and Health
Standards and Providing Penalties for Violations thereof"
PD442 Rule 1020 RA 11057 RA 11058
#7 : TRUE OR FALSE
Workplace Safety Inspection - It is the careful examination of people, equipment,
materials, and environment.
TRUE FALSE
#8 : TRUE OR FALSE
Safety officer cannot Issue Work Stoppage Order (WSO) when necessary based on the
requirements and procedures provided by the OSH standards.
TRUE FALSE
#9 : TRUE OR FALSE
Fall protection is required when one or more employees have exposure to falls of six
feet or greater to the lower level.
TRUE FALSE
#10 : MULTIPLE CHOICE
WORKERS RIGHT TO PERSONAL PROTECTIVE EQUIPMENT (PPE)
D.O 198-18 (Section 6) D.O 198-18 (Section 9) D.O 198-18 (Section 8)
D.O 198-18 (Section 7)
#11 : MULTIPLE CHOICE
Means any temporary elevated platform (made of timber, metal or bamboo) and its
supporting structure (including points of anchorage) used for supporting employees or
materials or both in the course of any construction works, including maintenance and
demolition works.
Ladder Guardrail Gondola Scaffolds
#12 : TRUE OR FALSE
Frame or Fabricated - the most common type of scaffold because they are versatile,
economical, and easy to use.
TRUE FALSE
#13 : IDENTIFICATION
Must be accomplished by the employer annually using the prescribed form
DOLE/BWC/OHSD-IP-6b, which shall be submitted to the Bureau, copy furnished the
Regional Labor Office on or before the 30th of the month following the end of each
calendar year.
#20 : IDENTIFICATION
Last line of defense to prevent accident
#21 : IDENTIFICATION
Is a proven tool to determine unsafe acts/ practices or conditions on a job by analyzing
the job, step by step & identify potential hazards in each step.
#25 : IDENTIFICATION
Is the determination of the environmental hazards and their hazardous effect on workers
health through direct measurements of hazards. It conducted for the following purposes.
#38 : IDENTIFICATION
Designed to provide employees and their families with income benefits and medical and
other benefits in the event of work-connected sickness, injury or death.
#48 : IDENTIFICATION
Something that has a potential for injury.