Professional Documents
Culture Documents
V100R009C00SPC150 (eNodeB)
Parameter List
Issue 06
Date 2014/08/11
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of
products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherw
specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties
guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this documen
ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty
any kind, express or implied.
by the contract made between Huawei and the customer. All or part of the
ay not be within the purchase scope or the usage scope. Unless otherwise
mmendations in this document are provided "AS IS" without warranties,
mplied.
notice. Every effort has been made in the preparation of this document to
on, and recommendations in this document do not constitute a warranty of
Purpose
This document describes the
Version
Document Version
06 (2014-08-11)
05 (2014-05-31)
04 (2014-04-26)
03 (2014-03-31)
02 (2014-02-28)
01 (2014-01-30)
Intended Audience
This document is intended for:
• Network planners
• System engineers
• Field engineers
• Shift operators
• Site maintainers
• Network operators
Organization
The following table describes the attributes of each parameter.
Parameter Attribute
MO
Parameter ID
NBI MO
NBI Parameter ID
Parameter Name
NE
MML Command
Meaning
IsKey
Mandatory
Dynamic Attribute
Feature ID
Feature Name
Value Type
GUI Value Range
Enumeration Number/Bit
Unit
Actual Value Range
Default Value
Recommended Value
Impact
Parameter Relationship
Access
Parameter Level
Applicable Mode
scribes the northbound interface (NBI) parameters.
Product Version
V100R009C00SPC150
V100R009C00SPC112
V100R009C00SPC100
V100R009C00SPC040
V100R009C00SPC020
V100R009C00SPC010
intended for:
IntraFreq ANR
Cell IntraFreqAnrInd CELL INTRAFREQANRIND
Indication
EUTRANINTERNFRE
EutranInterNFreq AnrInd ANRIND ANR Indication
Q
GERANNFREQGROU
GeranNfreqGroup AnrInd ANRIND ANR Indication
P
Common Name
CERTREQ USERADDINFO CERTREQ USERADDINFO
Additional Info.
STATEPROVIN STATEPROVINCENA
CERTREQ CERTREQ State or Province
CENAME ME
Certificate Validity
CERTCHKTSK ISENABLE CERTCHKTSK ISENABLE
Period Checking
CERTCHKTSK PERIOD CERTCHKTSK PERIOD Checking Period
UPDATEMETH
CERTCHKTSK CERTCHKTSK UPDATEMETHOD Update Method
OD
Match Fragment
ACLRULE MFRG ACLRULE MFRG
Message
Certification Deploy
CERTDEPLOY DEPLOYTYPE CERTDEPLOY DEPLOYTYPE
Position Type
Differentiated Service
DSCPMAP DSCP DSCPMAP DSCP
Codepoint
Perfect Forward
IPSECPOLICY PFS IPSECPOLICY PFS
Secrecy
Lifetime Based On
IPSECPOLICY LTS IPSECPOLICY LTS
Time
Lifetime Based On
IPSECPOLICY LTKB IPSECPOLICY LTKB
Traffic
Anti-Replay Window
IPSECPOLICY REPLAYWND IPSECPOLICY REPLAYWND
Size
IPSECPROPOSA
ENCAPMODE IPSECPROPOSAL ENCAPMODE Encapsulation Mode
L
PPPMUX Combine
MPGRP MUXTIME MPGRP MUXTIME
Timeout
MLPPP Packets
MPGRP MPDAAT MPGRP MPDAAT Discard Alarm Appear
Threshold
MLPPP Packets
MPGRP MPDADT MPGRP MPDADT Discard Alarm
Disappear Threshold
Protocol Field
MPLNK PFC MPLNK PFC
Compression
Maximum Length of
PPPLNK MAXSFLEN PPPLNK MAXSFLEN
PPP Mux Subframe
Maximum Length of
PPPLNK MAXMFLEN PPPLNK MAXMFLEN
PPP Muxframe
PPP Muxframe
PPPLNK MUXTIME PPPLNK MUXTIME
Combination Timeout
Protocol Field
PPPLNK PFC PPPLNK PFC
Compression
TX Traffic Shaping
RSCGRPALG TXSSW RSCGRPALG TXSSW
Switch
TX Bandwidth
RSCGRPALG TXBWASW RSCGRPALG TXBWASW
Adjustment Switch
RX Bandwidth
RSCGRPALG RXBWASW RSCGRPALG RXBWASW
Adjustment Switch
TX Bandwidth Adjust
RSCGRPALG TXBWAMIN RSCGRPALG TXBWAMIN
Minimum
RX Bandwidth Adjust
RSCGRPALG RXBWAMIN RSCGRPALG RXBWAMIN
Minimum
OM FTP Traffic
RSCGRPALG OMTCSW RSCGRPALG OMTCSW
Control Switch
Congestion Time
RSCGRPALG CTTH RSCGRPALG CTTH
Threshold
Uplink Pre-emption
TACALG TRMULPRESW TACALG TRMULPRESW
Algorithm Switch
Downlink Pre-emption
TACALG TRMDLPRESW TACALG TRMDLPRESW
Algorithm Switch
VLANGROUPN
VLANCLASS VLANCLASS VLANGROUPNO VLAN Group No.
O
Connect Port 1
RETSUBUNIT CONNCN1 RETSUBUNIT CONNCN1
Cabinet No.
Connect Port 1
RETSUBUNIT CONNSRN1 RETSUBUNIT CONNSRN1
Subrack No.
Connect Port 2
RETSUBUNIT CONNCN2 RETSUBUNIT CONNCN2
Cabinet No.
Connect Port 2
RETSUBUNIT CONNSRN2 RETSUBUNIT CONNSRN2
Subrack No.
Clock Source
IPCLKLNK MACMODE IPCLKLNK MACMODE
Specified or Not
PDELAYREQFR
IPCLKLNK IPCLKLNK PDELAYREQFREQ PDelay Request Freq
EQ
CnOperatorExten CNOPERATOREXTE
CnOperatorId CNOPERATORID CN Operator ID
dedQci NDEDQCI
CSFallBackBlind CSFALLBACKBLINDH
CnOperatorId CNOPERATORID CN Operator ID
HoCfg OCFG
CSFallBackBlind CSFALLBACKBLINDH
UtranLcsCap UTRANLCSCAP UTRAN LCS capability
HoCfg OCFG
CSFallBackBlind CSFALLBACKBLINDH
GeranLcsCap GERANLCSCAP GERAN LCS capability
HoCfg OCFG
PreallocationStat PREALLOCATIONST
SpidCfg SPIDCFG PreallocationStatus
us ATUS
SPID-based Handover
HoBackToHPLM HOBACKTOHPLMNS
SpidCfg SPIDCFG Back To HPLMN
NSwitch WITCH
Switch
CounterCheckPar CounterCheckTi COUNTERCHECKPA COUNTERCHECKTIM
Counter check timer
a mer RA ER
ENodeBCipherCa
ThirdCipherAlgo ENODEBCIPHERCAP THIRDCIPHERALGO Third cipher algorithm
p
ENodeBConnStat ENODEBCONNSTAT
EndMarkerTimer ENDMARKERTIMER End Marker Timer
eTimer ETIMER
RrcConnStateTim RRCCONNSTATETIM
T302 T302 Timer302
er ER
RrcConnStateTim RRCCONNSTATETIM
T304ForEutran T304FOREUTRAN Timer304 for EUTRAN
er ER
RrcConnStateTim RRCCONNSTATETIM
T304ForGeran T304FORGERAN Timer304 for GERAN
er ER
RrcConnStateTim RRCCONNSTATETIM
T320ForOther T320FOROTHER Timer320 for other
er ER
RrcConnStateTim RRCCONNSTATETIM
UeInactiveTimer UEINACTIVETIMER Ue inactive timer
er ER
RrcConnStateTim RRCCONNSTATETIM
UlSynTimer ULSYNTIMER Uplink Sync Timer
er ER
Distance-based
DistBasedMeas DISTBASEDMEASOB
DistBasedHO DISTBASEDHO Measurement Object
ObjType JTYPE
Type
DistBasedHOTh Distance-based
DistBasedHO DISTBASEDHO DISTBASEDHOTHD
d Handover Threshold
OnDurationTime
DrxParaGroup DRXPARAGROUP ONDURATIONTIMER On Duration Timer
r
DrxInactivityTim DRXINACTIVITYTIME
DrxParaGroup DRXPARAGROUP DRX Inactivity Timer
er R
DRX Retransmission
DrxParaGroup DrxReTxTimer DRXPARAGROUP DRXRETXTIMER
Timer
InterRatHoComm INTERRATHOCOMM
LocalCellId LOCALCELLID Local cell ID
Group GROUP
InterRatHoComm InterRatHoCom INTERRATHOCOMM INTERRATHOCOMM InterRAT handover
Group mGroupId GROUP GROUPID common group ID
InterRatHoCdma INTERRATHOCDMA1
LocalCellId LOCALCELLID Local cell ID
1xRttGroup XRTTGROUP
InterRAT handover to
InterRatHoCdma InterRatHoCdma INTERRATHOCDMA1 INTERRATHOCDMA1
CDMA20001xRTT
1xRttGroup 1xRttGroupId XRTTGROUP XRTTGROUPID
group ID
InterRatHoCdma InterRatHoCdma INTERRATHOCDMA1 INTERRATHOCDMAB CDMA20001XRTT
1xRttGroup B1Hyst XRTTGROUP 1HYST handover hysteresis
CoverageBased
InterRatHoCdma InterRatHoCdma INTERRATHOCDMA1 INTERRATHOCDMAB
CDMA20001XRTT
1xRttGroup B1ThdPs XRTTGROUP 1THDPS
trigger threshold
InterRatHoCdma InterRatHoCdma INTERRATHOCDMA1 INTERRATHOCDMAB CDMA20001XRTT
1xRttGroup B1TimeToTrig XRTTGROUP 1TIMETOTRIG time to trigger
Load Service Based
InterRatHoCdma LdSvBasedHoC INTERRATHOCDMA1 LDSVBASEDHOCDM
CDMA20001XRTT
1xRttGroup dmaB1ThdPs XRTTGROUP AB1THDPS
trigger threshold
RlfTimerConstGro RLFTIMERCONSTGR
LocalCellId LOCALCELLID Local cell ID
up OUP
RlfTimerConstGro RLFTIMERCONSTGR
T301 T301 Timer 301
up OUP
RlfTimerConstGro RLFTIMERCONSTGR
T310 T310 Timer 310
up OUP
RlfTimerConstGro RLFTIMERCONSTGR
T311 T311 Timer 311
up OUP
RlfTimerConstGro RLFTIMERCONSTGR
N310 N310 Constant N310
up OUP
RlfTimerConstGro RLFTIMERCONSTGR
N311 N311 Constant N311
up OUP
InterRatHoCdma INTERRATHOCDMAH
LocalCellId LOCALCELLID Local cell ID
HrpdGroup RPDGROUP
InterRAT handover to
InterRatHoCdma InterRatHoCdma INTERRATHOCDMAH INTERRATHOCDMAH
CDMA2000HRPD
HrpdGroup HrpdGroupId RPDGROUP RPDGROUPID
group ID
InterRatHoCdma InterRatHoCdma INTERRATHOCDMAH INTERRATHOCDMAB CDMA2000HRPD
HrpdGroup B1Hyst RPDGROUP 1HYST handover hysteresis
CoverageBased
InterRatHoCdma InterRatHoCdma INTERRATHOCDMAH INTERRATHOCDMAB
CDMA2000HRPD
HrpdGroup B1ThdPs RPDGROUP 1THDPS
trigger threshold
InterRatHoCdma InterRatHoCdma INTERRATHOCDMAH INTERRATHOCDMAB CDMA2000HRPD time
HrpdGroup B1TimeToTrig RPDGROUP 1TIMETOTRIG to trigger
Load Service Based
InterRatHoCdma LdSvBasedHoC INTERRATHOCDMAH LDSVBASEDHOCDM
CDMA2000HRPD
HrpdGroup dmaB1ThdPs RPDGROUP AB1THDPS
trigger threshold
InterRatHoGeran INTERRATHOGERAN
LocalCellId LOCALCELLID Local cell ID
Group GROUP
Emergency call
Emc EmcEnable EMC EMCENABLE
enabled switch
Emergency call
EmcEnableInLim EMCENABLEINLIMIT
Emc EMC enabled switch in
itedMode EDMODE
limited mode
EmcDedicatedB EMCDEDICATEDBEA The ARP of EMC
Emc EMC
earerARP RERARP dedicated bearer
GLOBALPROCSWITC
GlobalProcSwitch RimCodingPolicy RIMCODINGPOLICY RIM Coding Policy
H
L2GU Handover
L2GUHoWithLC GLOBALPROCSWITC L2GUHOWITHLCAPS
GlobalProcSwitch Required With LTE
apSwitch H WITCH
Cap Switch
PreAllocationWe PREALLOCATIONWEI
ExtendedQci EXTENDEDQCI Pre-allocation weight
ight GHT
PrioritisedBitRat PRIORITISEDBITRAT
ExtendedQci EXTENDEDQCI Prioritised bit rate
e E
LogicalChannelP LOGICALCHANNELP
ExtendedQci EXTENDEDQCI Logical channel priority
riority RIORITY
InterRatPolicyCfg INTERRATPOLICYCF
NoFastAnrFlag NOFASTANRFLAG No fast ANR flag
Group GGROUP
DeltaOffsetCqiIn DELTAOFFSETCQIIN
PuschParam PUSCHPARAM Delta Offset CQI Index
dex DEX
DeltaOffsetRiInd DELTAOFFSETRIIND
PuschParam PUSCHPARAM Delta Offset RI Index
ex EX
RlcPdcpParaGro RLCPDCPPARAGRO
DiscardTimer DISCARDTIMER Discard timer
up UP
RlcPdcpParaGro RLCPDCPPARAGRO
UePollByte UEPOLLBYTE PollByte for UE
up UP
RlcPdcpParaGro RLCPDCPPARAGRO
ENodeBPollByte ENODEBPOLLBYTE PollByte for eNodeB
up UP
RlcPdcpParaGro RLCPDCPPARAGRO
UePollPdu UEPOLLPDU PollPdu for UE
up UP
RlcPdcpParaGro RLCPDCPPARAGRO
ENodeBPollPdu ENODEBPOLLPDU PollPdu for eNodeB
up UP
RlcPdcpParaGro RLCPDCPPARAGRO
UlRlcSnSize ULRLCSNSIZE Uplink RLC-Sn size
up UP
RlcPdcpParaGro RLCPDCPPARAGRO
DlRlcSnSize DLRLCSNSIZE Downlink RLC-SN size
up UP
PreAllocationWe PREALLOCATIONWEI
StandardQci STANDARDQCI Pre-allocation weight
ight GHT
PrioritisedBitRat PRIORITISEDBITRAT
StandardQci STANDARDQCI Prioritised bit rate
e E
LogicalChannelP LOGICALCHANNELP
StandardQci STANDARDQCI Logical channel priority
riority RIORITY
MimoAdaptivePar MIMOADAPTIVEPAR
InitialMimoType INITIALMIMOTYPE Initial Mimo Type
aCfg ACFG
TPerodicBSRTi TPERODICBSRTIME
TypDrbBsr TYPDRBBSR Periodic BSR Timer
mer R
BSR Retransmission
TypDrbBsr RetxBsrTimer TYPDRBBSR RETXBSRTIMER
Timer
GAP measurement
HoMeasComm GapPatternType HOMEASCOMM GAPPATTERNTYPE
pattern
EutranFilterCoeff EUTRANFILTERCOE EUTRAN RSRP filter
HoMeasComm HOMEASCOMM
Rsrp FFRSRP coefficient
SpeedDepParaI
HoMeasComm HOMEASCOMM SPEEDDEPPARAIND SpeedDependInd
nd
InterRatHoMaxR INTERRATHOMAXRP
InterRatHoComm INTERRATHOCOMM Max report cell number
prtCell RTCELL
IntraRatHoMaxR INTRARATHOMAXRP
IntraRatHoComm INTRARATHOCOMM Max report cell number
prtCell RTCELL
Intra-frequency
CellAccess IntraFreqResel CELLACCESS INTRAFREQRESEL
reselection indication
Additional hysteresis
CellResel QHystSfHigh CELLRESEL QHYSTSFHIGH
for high speed
Threshold for non-intra
SNonIntraSearc SNONINTRASEARCH
CellResel CELLRESEL freq measurements
hCfgInd CFGIND
configure indicator
Threshold for non-intra
SNonIntraSearc
CellResel CELLRESEL SNONINTRASEARCH frequency
h
measurements
Serving frequency
CellResel ThrshServLow CELLRESEL THRSHSERVLOW
lower priority threshold
CELLRESELPRIORIT
CellResel CellReselPriority CELLRESEL Cell reselection priority
Y
Minimum required RX
CellResel QRxLevMin CELLRESEL QRXLEVMIN
level
Minimum required RX
CellSel QRxLevMin CELLSEL QRXLEVMIN
level
Minimum required RX
CellSel QQualMin CELLSEL QQUALMIN
quality level
Minimum required RX
QQualMinOffset QQUALMINOFFSETC
CellSel CELLSEL quality level offset
CfgInd FGIND
configure indicator
Minimum required RX
CellSel QQualMinOffset CELLSEL QQUALMINOFFSET
quality level offset
ETWS PN message
CellSiMap EtwsPnDuration CELLSIMAP ETWSPNDURATION
duration time
TimeAlignmentTi TIMEALIGNMENTTIM
LocalCellId LOCALCELLID Local cell ID
mer ER
CellSpecificOffs CELLSPECIFICOFFS
Cell CELL Cell specific offset
et ET
EmergencyAreaI
Cell CELL EMERGENCYAREAID Emergency Area ID
d
CPRICompressi
Cell CELL CPRICOMPRESSION CPRI Compression
on
Beamforming
CellBf MaxBfRankPara CELLBF MAXBFRANKPARA maximum number of
layers
Downlink ICIC
CellDLIcicMcPara ReportInterval CELLDLICICMCPARA REPORTINTERVAL measurement report
interval
Downlink ICIC
MaxReportCellN MAXREPORTCELLNU
CellDLIcicMcPara CELLDLICICMCPARA measurement max
um M
report cell number
DownLink ICIC
CellDLIcicMcPara ReportAmount CELLDLICICMCPARA REPORTAMOUNT measurement report
amount
DownLink ICIC
CellDLIcicMcPara ReportQuantity CELLDLICICMCPARA REPORTQUANTITY measurement report
quantity
DownLink ICIC
CellDLIcicMcPara TriggerQuantity CELLDLICICMCPARA TRIGGERQUANTITY measurement trigger
quantity
DownLink ICIC
CellDLIcicMcPara Hysteresis CELLDLICICMCPARA HYSTERESIS measurement
hysteresis
DownLink ICIC
CellDLIcicMcPara TimeToTrigger CELLDLICICMCPARA TIMETOTRIGGER measurement time to
trigger
Downlink ICIC A3
CellDLIcicMcPara A3Offset CELLDLICICMCPARA A3OFFSET
offset
Downlink ICIC A6
CellDLIcicMcPara A6Offset CELLDLICICMCPARA A6OFFSET
offset
CellUsedPwrRati CELLUSEDPWRRATI
CellLowPower CELLLOWPOWER Cell used power ratio
o O
Reference signal
CellLowPower RsPwrAdjOffset CELLLOWPOWER RSPWRADJOFFSET
power adjust offset
Time length for
CellLowPower EnterTimeLen CELLLOWPOWER ENTERTIMELEN entering the low power
consumption mode
QCI1 handover
CellRacThd Qci1HoThd CELLRACTHD QCI1HOTHD
admission threshold
QCI2 handover
CellRacThd Qci2HoThd CELLRACTHD QCI2HOTHD
admission threshold
QCI3 handover
CellRacThd Qci3HoThd CELLRACTHD QCI3HOTHD
admission threshold
QCI4 handover
CellRacThd Qci4HoThd CELLRACTHD QCI4HOTHD
admission threshold
Gold new service
NewGoldService NEWGOLDSERVICE
CellRacThd CELLRACTHD admission threshold
Offset OFFSET
offset
Silver new service
NewSilverServic NEWSILVERSERVICE
CellRacThd CELLRACTHD admission threshold
eOffset OFFSET
offset
Bronze new service
NewCopperServi NEWCOPPERSERVIC
CellRacThd CELLRACTHD admission threshold
ceOffset EOFFSET
offset
QCI1 congest
CellRacThd Qci1CongThd CELLRACTHD QCI1CONGTHD
threshold
QCI2 congest
CellRacThd Qci2CongThd CELLRACTHD QCI2CONGTHD
threshold
QCI3 congest
CellRacThd Qci3CongThd CELLRACTHD QCI3CONGTHD
threshold
QCI4 congest
CellRacThd Qci4CongThd CELLRACTHD QCI4CONGTHD
threshold
Gold-level GBR
GoldGbrCongPr GOLDGBRCONGPRO
CellRacThd CELLRACTHD service congest
oportion PORTION
scheduler proportion
Silver-level GBR
SilverGbrCongPr SILVERGBRCONGPR
CellRacThd CELLRACTHD service congest
oportion OPORTION
scheduler proportion
Bronze-level GBR
CopperGbrCong COPPERGBRCONGP
CellRacThd CELLRACTHD service congest
Proportion ROPORTION
scheduler proportion
GBR used resource
GbrRbUsedHigh GBRRBUSEDHIGHTH
CellRacThd CELLRACTHD high proportion
Thd D
threshold
GBR used resource
GbrRbUsedLow GBRRBUSEDLOWTH
CellRacThd CELLRACTHD low proportion
Thd D
threshold
Downlink RB used
CellRacThd DlRbHighThd CELLRACTHD DLRBHIGHTHD
ratio high threshold
Downlink RB used
CellRacThd DlRbLowThd CELLRACTHD DLRBLOWTHD
ratio low threshold
Reference signal
CellRfShutdown RsPwrAdjOffset CELLRFSHUTDOWN RSPWRADJOFFSET
power adjust offset
Whether to mute UL
CellRicAlgo MuteULSym CELLRICALGO MUTEULSYM
symbol
Downlink PRB
CellShutdown DlPrbThd CELLSHUTDOWN DLPRBTHD
threshold
Uplink ICIC
CellULIcicMcPara ReportInterval CELLULICICMCPARA REPORTINTERVAL measurement report
interval
Uplink ICIC
MaxReportCellN MAXREPORTCELLNU
CellULIcicMcPara CELLULICICMCPARA measurement max
um M
report cell number
Uplink ICIC
CellULIcicMcPara ReportAmount CELLULICICMCPARA REPORTAMOUNT measurement report
amount
Uplink ICIC
CellULIcicMcPara ReportQuantity CELLULICICMCPARA REPORTQUANTITY measurement report
quantity
Uplink ICIC
CellULIcicMcPara TriggerQuantity CELLULICICMCPARA TRIGGERQUANTITY measurement trigger
quantity
Uplink ICIC
CellULIcicMcPara Hysteresis CELLULICICMCPARA HYSTERESIS measurement
hysteresis
Uplink ICIC
CellULIcicMcPara TimeToTrigger CELLULICICMCPARA TIMETOTRIGGER measurement time to
trigger
AdaptHarqSwitc
CellUlschAlgo CELLULSCHALGO ADAPTHARQSWITCH adaptive HARQ switch
h
UL scheduling request
CellUlschAlgo UlSrSchDateLen CELLULSCHALGO ULSRSCHDATELEN
user data length
Semi-persistent
CellUlschAlgo SpsRelThd CELLULSCHALGO SPSRELTHD resource implicit
release threshold
SmartPreAllocati SMARTPREALLOCAT Smart pre-allocation
CellUlschAlgo CELLULSCHALGO
onDuration IONDURATION duration
InterRatCellShutd INTERRATCELLSHUT
StartTime STARTTIME Start time
own DOWN
InterRatCellShutd INTERRATCELLSHUT
StopTime STOPTIME Stop time
own DOWN
InterRatCellShutd INTERRATCELLSHUT
BearNumThd BEARNUMTHD UE number threshold
own DOWN
Downlink CoMP
CellAlgoSwitch DlCompSwitch CELLALGOSWITCH DLCOMPSWITCH
algorithms switch
OtherServiceWei OTHERSERVICEWEI
CellDlschAlgo CELLDLSCHALGO Other Service Weight
ght GHT
Downlink ICIC
CellDlschAlgo DlIcicSchMode CELLDLSCHALGO DLICICSCHMODE
Schedule Mode
Intra-Frequency
CellMLB IntraFreqMlbThd CELLMLB INTRAFREQMLBTHD Mobility Load
Balancing Threshold
LoadExchangeP LOADEXCHANGEPE Load Information
CellMLB CELLMLB
eriod RIOD Exchange Period
Load Difference
CellMLB LoadDiffThd CELLMLB LOADDIFFTHD
Threshold
UTRAN Idle Mode
Mobility Load
CellMLB InitValidPeriod CELLMLB INITVALIDPERIOD
Balancing Initial Valid
Period
LoadTransferFa LOADTRANSFERFAC
CellMLB CELLMLB Load Transfer Factor
ctor TOR
Mobility Load
MlbUeNumOffse
CellMLB CELLMLB MLBUENUMOFFSET Balancing UE Number
t
Offset
Mobility Load
CellMLB MlbMaxUeNum CELLMLB MLBMAXUENUM Balancing Max UE
Number
Mobility Load
MlbUeSelectPrb MLBUESELECTPRBT Balancing UE
CellMLB CELLMLB
Thd HD Selection PRB Usage
Threshold
ComSigCongreg COMSIGCONGREGL SignalCongregateLeve
CellPdcchAlgo CELLPDCCHALGO
Lv V l
PDCCH Virtual
CellPdcchAlgo VirtualLoadPro CELLPDCCHALGO VIRTUALLOADPRO
Loading Proportion
CellNoAccessAlm CELLNOACCESSALM
LocalCellId LOCALCELLID Local cell ID
Para PARA
SimLoadCfgInde
CellSimuLoad CELLSIMULOAD SIMLOADCFGINDEX Configure Index
x
SRS subframe
SRSCfg SrsSubframeCfg SRSCFG SRSSUBFRAMECFG
configuration
SRS ACK/NACK
SRSCfg AnSrsSimuTrans SRSCFG ANSRSSIMUTRANS simultaneous
transmission
SRS Configuration
SRSCfg SrsCfgInd SRSCFG SRSCFGIND
Indicator
TDD SRS
SRSCfg TddSrsCfgMode SRSCFG TDDSRSCFGMODE
Configuration Mode
DefaultPagingCy DEFAULTPAGINGCY
PCCHCfg PCCHCFG Default paging cycle
cle CLE
PCCHCfg Nb PCCHCFG NB NB
Cdma20001XrttPr CDMA20001XRTTPR
LocalCellId LOCALCELLID Local cell ID
eReg EREG
Cdma20001XrttPr CDMA20001XRTTPR
Mcc MCC Mobile country code
eReg EREG
Cdma20001XrttPr CDMA20001XRTTPR
Mnc MNC Mobile network code
eReg EREG
Cdma20001XrttPr CDMA20001XRTTPR
Sid SID System ID
eReg EREG
Cdma20001XrttPr CDMA20001XRTTPR
Nid NID Network ID
eReg EREG
Cdma20001XrttPr CDMA20001XRTTPR
MscId MSCID MSC ID
eReg EREG
Cdma20001XrttPr CDMA20001XRTTPR
BandClass BANDCLASS Band class
eReg EREG
Cdma2000HrpdN CDMA2000HRPDNCE
LocalCellId LOCALCELLID Local cell ID
Cell LL
Cdma2000HrpdN CDMA2000HRPDNCE
SectorId104 SECTORID104 SectorID104
Cell LL
Cdma2000HrpdN CDMA2000HRPDNCE
SectorId24 SECTORID24 SectorID24
Cell LL
Cdma2000HrpdN CDMA2000HRPDNCE
BandClass BANDCLASS Band class
Cell LL
Cdma2000HrpdN CDMA2000HRPDNCE
Frequency FREQUENCY Frequency
Cell LL
Cdma2000HrpdN CDMA2000HRPDNCE
NoHoFlag NOHOFLAG No handover indicator
Cell LL
Cdma2000HrpdN CDMA2000HRPDNCE
NoRmvFlag NORMVFLAG No remove indicator
Cell LL
Cdma2000HrpdN CDMA2000HRPDNCE
AnrFlag ANRFLAG ANR flag
Cell LL
Cdma2000HrpdN CDMA2000HRPDNCE
LocalCellName LOCALCELLNAME Local cell name
Cell LL
Cdma2000HrpdN NeighbourCellN CDMA2000HRPDNCE NEIGHBOURCELLNA
Neighbour cell name
Cell ame LL ME
Cdma2000HrpdP CDMA2000HRPDPRE
LocalCellId LOCALCELLID Local cell ID
reReg REG
Cdma2000HrpdP CDMA2000HRPDPRE
Mcc MCC Mobile country code
reReg REG
Cdma2000HrpdP CDMA2000HRPDPRE
Mnc MNC Mobile network code
reReg REG
Cdma2000HrpdR CDMA2000HRPDREF
LocalCellId LOCALCELLID Local cell ID
efCell CELL
Cdma2000HrpdR CDMA2000HRPDREF
Mcc MCC Mobile country code
efCell CELL
Cdma2000HrpdR CDMA2000HRPDREF
Mnc MNC Mobile network code
efCell CELL
Cdma2000HrpdR CDMA2000HRPDREF
SectorId104 SECTORID104 SectorID104
efCell CELL
Cdma2000HrpdR CDMA2000HRPDREF
SectorId24 SECTORID24 SectorID24
efCell CELL
Cdma2000HrpdR CDMA2000HRPDREF
SelectedRatio SELECTEDRATIO Selected ratio
efCell CELL
SearchWindowS SEARCHWINDOWSIZ
Cdma2000Nfreq CDMA2000NFREQ Search window size
ize E
GeranExternalCel GERANEXTERNALCE
Rac RAC Routing area code
l LL
GeranExternalCel GERANEXTERNALCE
CtrlMode CTRLMODE Control Mode
l LL
NeighbourCellN NEIGHBOURCELLNA
GeranNcell GERANNCELL Neighbour cell name
ame ME
GERANNFREQGROU CELLRESELPRIORIT
GeranNfreqGroup CellReselPriority Cell reselection priority
P Y
GERANNFREQGROU
GeranNfreqGroup PmaxGeran PMAXGERAN PMAX
P
GERANNFREQGROU
GeranNfreqGroup ThreshXHigh THRESHXHIGH High priority threshold
P
GERANNFREQGROU
GeranNfreqGroup OffsetFreq OFFSETFREQ Frequency offset
P
EutranIntraFreqN EUTRANINTRAFREQ
AnrFlag ANRFLAG ANR flag
Cell NCELL
EutranIntraFreqN EUTRANINTRAFREQ
CtrlMode CTRLMODE Control Mode
Cell NCELL
Inter frequency cell
CellReselPriority EUTRANINTERNFRE CELLRESELPRIORIT
EutranInterNFreq resel priority configure
CfgInd Q YCFGIND
indicator
EUTRANINTERNFRE CELLRESELPRIORIT Inter frequency cell
EutranInterNFreq CellReselPriority
Q Y resel priority
EUTRANINTERNFRE
EutranInterNFreq Pmax PMAX PMAX
Q
EUTRANINTERNFRE
EutranInterNFreq NeighCellConfig NEIGHCELLCONFIG Neighbor cell config
Q
EutranInterFreqN EUTRANINTERFREQ
CellQoffset CELLQOFFSET Cell offset
Cell NCELL
EutranInterFreqN EUTRANINTERFREQ
BlindHoPriority BLINDHOPRIORITY Blind handover Priority
Cell NCELL
EutranInterFreqN EUTRANINTERFREQ
AnrFlag ANRFLAG ANR flag
Cell NCELL
EutranInterFreqN EUTRANINTERFREQ
LocalCellName LOCALCELLNAME Local cell name
Cell NCELL
EutranInterFreqN EUTRANINTERFREQ
CtrlMode CTRLMODE Control Mode
Cell NCELL
EutranExternalCe EUTRANEXTERNALC
CtrlMode CTRLMODE Control Mode
ll ELL
Cdma2000BcSCe CDMA2000BCSCELL
LocalCellId LOCALCELLID Local cell ID
llOp OP
Cdma2000BcSCe CDMA2000BCSCELL
BandClass BANDCLASS Band class
llOp OP
Cdma2000BcSCe CDMA2000BCSCELL
CnOperatorID CNOPERATORID Cn operator ID
llOp OP
EutranNFreqSCel EUTRANNFREQSCEL
LocalCellId LOCALCELLID Local cell ID
lOp LOP
EutranNFreqSCel EUTRANNFREQSCEL
DlEarfcn DLEARFCN Downlink EARFCN
lOp LOP
EutranNFreqSCel EUTRANNFREQSCEL
CnOperatorID CNOPERATORID Cn operator ID
lOp LOP
GeranNFGroupS GERANNFGROUPSC
LocalCellId LOCALCELLID Local cell ID
CellOp ELLOP
GeranNFGroupS GERANNFGROUPSC
BcchGroupId BCCHGROUPID BCCH group ID
CellOp ELLOP
GeranNFGroupS GERANNFGROUPSC
CnOperatorID CNOPERATORID Cn operator ID
CellOp ELLOP
NeighbourCellN NEIGHBOURCELLNA
UtranNCell UTRANNCELL Neighbour cell name
ame ME
UtranNFreqSCell UTRANNFREQSCELL
LocalCellId LOCALCELLID Local cell ID
Op OP
UtranNFreqSCell UTRANNFREQSCELL
UtranDlArfcn UTRANDLARFCN Downlink UARFCN
Op OP
UtranNFreqSCell UTRANNFREQSCELL
CnOperatorID CNOPERATORID Cn operator ID
Op OP
Minimum required
UtranNFreq Qqualmin UTRANNFREQ QQUALMIN
quality level
Minimum required RX
UtranNFreq QRxLevMin UTRANNFREQ QRXLEVMIN
level
UTRANEXTERNALCE
UtranExternalCell Rac RAC Routing area code
LL
UTRANEXTERNALCE
UtranExternalCell CtrlMode CTRLMODE Control Mode
LL
ENodeBAlgoSwit ENODEBALGOSWITC
UlIcicTimeSwitch ULICICTIMESWITCH UlIcic time switch
ch H
MRO optimization
MRO OptPeriod MRO OPTPERIOD
period
Ncell optimization
MRO NcellOptThd MRO NCELLOPTTHD
threshold
SimuLoadPwrTh
SimuLoad SIMULOAD SIMULOADPWRTHD Power usage threshold
d
SimuLoadReport SIMULOADREPORTP
SimuLoad SIMULOAD Report period
Period ERIOD
SimuLoadStatPe SIMULOADSTATPERI
SimuLoad SIMULOAD Statistic period
riod OD
Frequency selective
SimuLoad FreqSelSwitch SIMULOAD FREQSELSWITCH
switch
DlMaxThroughp DLMAXTHROUGHPU
TcpAckCtrlAlgo TCPACKCTRLALGO DL Max Throughput
ut T
Certificate Authority
CA CANAME CA CANAME
Name
Certificate Authority
CA URL CA URL
URL
Certificate Update
CA UPDSIP CA UPDSIP
Source IP
CRLGETMETH
CRLTSK CRLTSK CRLGETMETHOD Access Method
OD
Destination Port
ACLRULE DOP ACLRULE DOP
Operate
DHCPRELAYSWI
ES DHCPRELAYSWITCH ES DHCP Relay Switch
TCH
DHCP Server IP
DHCPSVRIP DHCPSVRIP DHCPSVRIP DHCPSVRIP
Address
E1T1 CN E1T1 CN Cabinet No.
Transmission
EP2RSCGRP BEAR EP2RSCGRP BEAR Resource Group Bear
Type
Transmission
EP2RSCGRP RSCGRPID EP2RSCGRP RSCGRPID
Resource Group ID
SCTPHOSTREF
EPGROUP SCTPHOSTREF SCTPHOSTID SCTP Host ID
.SCTPHOSTID
SCTPPEERREF
EPGROUP SCTPPEERREF SCTPPEERID SCTP Peer ID
.SCTPPEERID
USERPLANEHO
USERPLANEHOSTRE
EPGROUP STREF.UPHOS UPHOSTID User Plane Host ID
F
TID
USERPLANEPE
USERPLANEPEERRE
EPGROUP ERREF.UPPEE UPPEERID User Plane Peer ID
F
RID
PACKETFILTER PACKETFILTERSWIT
EPGROUP EPGROUP Packet Filter Switch
SWITCH CH
Maximum
ETHPORT MTU ETHPORT MTU
Transmission Unit
OMCHSWITCH
GTRANSPARA GTRANSPARA OMCHSWITCHBACK OMCH Switch Back
BACK
DPD Retransmission
IKEPEER DPDRETRI IKEPEER DPDRETRI
Interval
DPD Retransmission
IKEPEER DPDRETRN IKEPEER DPDRETRN
Count
Authentication
IKEPROPOSAL AUTHALG IKEPROPOSAL AUTHALG
Algorithm
Transmission
IP2RSCGRP BEAR IP2RSCGRP BEAR Resource Group Bear
Type
Transmission
IP2RSCGRP RSCGRPID IP2RSCGRP RSCGRPID
Resource Group ID
INVALIDPKTAL
IPGUARD IPGUARD INVALIDPKTALMTHD Alarm Threshold
MTHD
Transport Resource
IPPATH QT IPPATH QT
Type
Transmission
IPPATH RSCGRPID IPPATH RSCGRPID
Resource Group ID
Join Transmission
IPPATH JNRSCGRP IPPATH JNRSCGRP
Resource Group
IPSECPROPOSA
PROPNAME IPSECPROPOSAL PROPNAME IPSec Proposal Name
L
IPSECPROPOSA
TRANMODE IPSECPROPOSAL TRANMODE Transform
L
IPSECPROPOSA AH Authentication
AHAUTHALG IPSECPROPOSAL AHAUTHALG
L Algorithm
LR CN LR CN Cabinet No.
LR SN LR SN Slot No.
LR PT LR PT Port Type
LR PN LR PN Port No.
UL Committed
LR CIR LR CIR
Information Rate
DL Committed
LR DLCIR LR DLCIR
Information Rate
IP Header
MPGRP IPHC MPGRP IPHC
Compression
MLPPP Group
MPLNK MPGRPSBT MPLNK MPGRPSBT
Subboard Type
IP Header
PPPLNK IPHC PPPLNK IPHC
Compression
Transmission
RSCGRP RSCGRPID RSCGRP RSCGRPID
Resource Group ID
TX Committed Burst
RSCGRP TXCBS RSCGRP TXCBS
Size
TX Excessive Burst
RSCGRP TXEBS RSCGRP TXEBS
Size
TX Committed
RSCGRP TXCIR RSCGRP TXCIR
Information Rate
RX Committed
RSCGRP RXCIR RSCGRP RXCIR
Information Rate
TX Peak Information
RSCGRP TXPIR RSCGRP TXPIR
Rate
RX Peak Information
RSCGRP RXPIR RSCGRP RXPIR
Rate
Transmission
RSCGRPALG BEAR RSCGRPALG BEAR Resource Group Bear
Type
Transmission
RSCGRPALG RSCGRPID RSCGRPALG RSCGRPID
Resource Group ID
TX Reserved
RSCGRPALG TXRSVBW RSCGRPALG TXRSVBW
Bandwidth
RX Reserved
RSCGRPALG RXRSVBW RSCGRPALG RXRSVBW
Bandwidth
Second Local IP
SCTPHOST SIGIP2V4 SCTPHOST SIGIP2V4
Address
Second Peer IP
SCTPLNK SECPEERIP SCTPLNK SECPEERIP
Address
Max Path
SCTPLNK MAXPATHRETR SCTPLNK MAXPATHRETR
Retransmission
Second Peer IP
SCTPPEER SIGIP2V4 SCTPPEER SIGIP2V4
Address
SECURITYHOS
SECURITYHOST SECURITYHOST SECURITYHOSTID Security Host ID
TID
IPSECPROPNA
SECURITYHOST SECURITYHOST IPSECPROPNAME IPSec Proposal Name
ME
SECURITYPEE
SECURITYPEER SECURITYPEER SECURITYPEERID Security Peer ID
RID
IPSECPROPNA
SECURITYPEER SECURITYPEER IPSECPROPNAME IPSec Proposal Name
ME
SECURITYTEMP SECURITYTEMPLAT
SEGWSWITCH SEGWSWITCH SeGW Switch
LATE E
SECURITYTEMP SECURITYTEMPLAT
PROPID PROPID IKE Proposal ID
LATE E
SECURITYTEMP SECURITYTEMPLAT
IKEVERSION IKEVERSION IKE Version
LATE E
SECURITYTEMP SECURITYTEMPLAT
EXCHMODE EXCHMODE Exchange Mode
LATE E
SECURITYTEMP SECURITYTEMPLAT
PKEY PKEY Pre-shared Key
LATE E
Destination Cabinet
TUNNEL DCN TUNNEL DCN
No.
Destination Subrack
TUNNEL DSRN TUNNEL DSRN
No.
TWAMPRESPON
RESPONDERID TWAMPRESPONDER RESPONDERID Responder Index
DER
TWAMPRESPON
LOCALIP TWAMPRESPONDER LOCALIP Local IP Address
DER
USERPLANEHO
VRFIDX USERPLANEHOST VRFIDX VRF Index
ST
USERPLANEHO
IPVERSION USERPLANEHOST IPVERSION IP Version
ST
USERPLANEHO
LOCIPV4 USERPLANEHOST LOCIPV4 Local IP Address
ST
USERPLANEHO
LOCIPV6 USERPLANEHOST LOCIPV6 Local IPv6 Address
ST
USERPLANEHO
IPSECSWITCH USERPLANEHOST IPSECSWITCH IPSec Switch
ST
USERPLANEHO
SECHOSTID USERPLANEHOST SECHOSTID Security Host ID
ST
USERPLANEHO
USERLABEL USERPLANEHOST USERLABEL User Label
ST
USERPLANEPE
UPPEERID USERPLANEPEER UPPEERID User Plane Peer ID
ER
USERPLANEPE
VRFIDX USERPLANEPEER VRFIDX VRF Index
ER
USERPLANEPE
IPVERSION USERPLANEPEER IPVERSION IP Version
ER
USERPLANEPE
PEERIPV4 USERPLANEPEER PEERIPV4 Peer IP Address
ER
USERPLANEPE
PEERIPV6 USERPLANEPEER PEERIPV6 Peer IPv6 Address
ER
USERPLANEPE
IPSECSWITCH USERPLANEPEER IPSECSWITCH IPSec Switch
ER
USERPLANEPE
SECPEERID USERPLANEPEER SECPEERID Security Peer ID
ER
USERPLANEPE
USERLABEL USERPLANEPEER USERLABEL User Label
ER
VLANGROUPN
VLANMAP VLANMAP VLANGROUPNO VLAN Group No.
O
RETDEVICEDAT
DEVICENO RETDEVICEDATA DEVICENO Device No.
A
RETDEVICEDAT
SUBUNITNO RETDEVICEDATA SUBUNITNO Subunit No.
A
RETDEVICEDAT
BEARING RETDEVICEDATA BEARING Antenna Bearing
A
RETDEVICEDAT
BSID RETDEVICEDATA BSID Base Station ID
A
RETDEVICEDAT
BEAMWIDTH1 RETDEVICEDATA BEAMWIDTH1 Beamwidth1
A
RETDEVICEDAT
BEAMWIDTH2 RETDEVICEDATA BEAMWIDTH2 Beamwidth2
A
RETDEVICEDAT
BEAMWIDTH3 RETDEVICEDATA BEAMWIDTH3 Beamwidth3
A
RETDEVICEDAT
BEAMWIDTH4 RETDEVICEDATA BEAMWIDTH4 Beamwidth4
A
RETDEVICEDAT
GAIN1 RETDEVICEDATA GAIN1 Gain1
A
RETDEVICEDAT
GAIN2 RETDEVICEDATA GAIN2 Gain2
A
RETDEVICEDAT
GAIN3 RETDEVICEDATA GAIN3 Gain3
A
RETDEVICEDAT
GAIN4 RETDEVICEDATA GAIN4 Gain4
A
RETDEVICEDAT
DATE RETDEVICEDATA DATE Installation Date
A
RETDEVICEDAT
INSTALLERID RETDEVICEDATA INSTALLERID Installer's ID
A
RETDEVICEDAT
BAND1 RETDEVICEDATA BAND1 Band1
A
RETDEVICEDAT
BAND2 RETDEVICEDATA BAND2 Band2
A
RETDEVICEDAT
BAND3 RETDEVICEDATA BAND3 Band3
A
RETDEVICEDAT
BAND4 RETDEVICEDATA BAND4 Band4
A
RETDEVICEDAT
SECTORID RETDEVICEDATA SECTORID Sector ID
A
RETDEVICEDAT
SERIALNO RETDEVICEDATA SERIALNO Antenna Serial No.
A
UMTSDEMMOD UMTS UL
BASEBANDEQM BASEBANDEQM UMTSDEMMODE
E Demodulation Mode
BASEBANDEQ
BASEBANDEQMBOA
BASEBANDEQM MBOARDREF.C CN Cabinet No.
RDREF
N
BASEBANDEQ
BASEBANDEQMBOA
BASEBANDEQM MBOARDREF.S SN Slot No.
RDREF
N
BASEBANDEQ
BASEBANDEQMBOA
BASEBANDEQM MBOARDREF.S SRN Subrack No.
RDREF
RN
LOCATIONNAM
SECTOR SECTOR LOCATIONNAME Location Name
E
SECTORANTEN SECTORANTENNAR
SECTOR ANTN Antenna Channel No.
NAREF.ANTN EF
SECTORANTEN SECTORANTENNAR
SECTOR CN Cabinet No.
NAREF.CN EF
SECTORANTEN SECTORANTENNAR
SECTOR SN Slot No.
NAREF.SN EF
SECTORANTEN SECTORANTENNAR
SECTOR SRN Subrack No.
NAREF.SRN EF
SECTOREQMA
SECTOREQMANTEN
SECTOREQM NTENNAREF.A ANTN Antenna Channel No.
NAREF
NTN
SECTOREQMA
SECTOREQMANTEN
SECTOREQM NTENNAREF.C CN Cabinet No.
NAREF
N
SECTOREQMA
SECTOREQMANTEN
SECTOREQM NTENNAREF.A ANTTYPE Antenna RX/TX Mode
NAREF
NTTYPE
SECTOREQMA
SECTOREQMANTEN
SECTOREQM NTENNAREF.S SN Slot No.
NAREF
N
SECTOREQMA
SECTOREQMANTEN
SECTOREQM NTENNAREF.S SRN Subrack No.
NAREF
RN
SECTOREQMA
SECTOREQMANTEN TX Antenna
SECTOREQM NTENNAREF.T TXBKPMODE
NAREF Master/Slave Mode
XBKPMODE
Geo-coordinate Data
LOCATION GCDF LOCATION GCDF
Format
LOCATIONNAM
LOCATION LOCATION LOCATIONNAME Location Name
E
PRODUCTVER
NE NE PRODUCTVERSION Product Version
SION
NE DID NE DID Deployment Identifier
Network Element
NE NENAME NE NENAME
Name
CnOperatorHoCf CNOPERATORHOCF
CnOperatorId CNOPERATORID CN Operator ID
g G
CnOperatorHoCf CNOPERATORHOCF
FirstRatPri FIRSTRATPRI First RAT Priority
g G
CnOperatorHoCf CNOPERATORHOCF
SecondRatPri SECONDRATPRI Second RAT Priority
g G
CnOperatorSpidC CNOPERATORSPIDC
CnOperatorId CNOPERATORID CN Operator ID
fg FG
CnOperatorSpidC CNOPERATORSPIDC
Spid SPID Spid
fg FG
CnOperatorStand CNOPERATORSTAN
CnOperatorId CNOPERATORID CN Operator ID
ardQci DARDQCI
CnOperatorStand CNOPERATORSTAN
Qci QCI QoS Class Indication
ardQci DARDQCI
Service-based inter-
CnOperatorStand ServiceIrHoCfgG CNOPERATORSTAN SERVICEIRHOCFGG
RAT handover policy
ardQci roupId DARDQCI ROUPID
group ID
Service-based inter-
CnOperatorStand ServiceIfHoCfgG CNOPERATORSTAN SERVICEIFHOCFGG
Freq handover policy
ardQci roupId DARDQCI ROUPID
group ID
Service-based
CnOperatorStand ServiceHoBeare CNOPERATORSTAN SERVICEHOBEARER
Handover Bearer
ardQci rPolicy DARDQCI POLICY
Policy
CSFallBackPolicy CsfbUserArpCfg CSFALLBACKPOLICY CSFBUSERARPCFGS Csfb User Arp
Cfg Switch CFG WITCH Configuration Switch
RatFreqPriorityGr RATFREQPRIORITYG
RatType RATTYPE RAT Type
oup ROUP
RatFreqPriorityGr RATFREQPRIORITYG
Priority PRIORITY Priority
oup ROUP
ServiceIfDlEarfcn SERVICEIFDLEARFC
CnOperatorId CNOPERATORID CN Operator ID
Grp NGRP
ServiceIfDlEarfcn SERVICEIFDLEARFC
DlEarfcn DLEARFCN Downlink EARFCN
Grp NGRP
ServiceIfHoCfgGr SERVICEIFHOCFGG
CnOperatorId CNOPERATORID CN Operator ID
oup ROUP
Service-based inter-
ServiceIfHoCfgGr ServiceIfHoCfgG SERVICEIFHOCFGG SERVICEIFHOCFGG
Freq handover policy
oup roupId ROUP ROUPID
group ID
ServiceIfHoCfgGr InterFreqHoStat SERVICEIFHOCFGG INTERFREQHOSTAT Inter-Freq handover
oup e ROUP E state
Service-based
ServiceIfHoCfgGr A4RptWaitingTi SERVICEIFHOCFGG A4RPTWAITINGTIME
InterFreq A4 Report
oup mer ROUP R
Waiting Timer
Service-based
ServiceIfHoCfgGr SERVICEIFHOCFGG
A4TimeToTriger A4TIMETOTRIGER InterFreq A4 time to
oup ROUP
trigger
ServiceIrHoCfgGr SERVICEIRHOCFGG
CnOperatorId CNOPERATORID CN Operator ID
oup ROUP
Service-based inter-
ServiceIrHoCfgGr ServiceIrHoCfgG SERVICEIRHOCFGG SERVICEIRHOCFGG
RAT handover policy
oup roupId ROUP ROUPID
group ID
ServiceIrHoCfgGr SERVICEIRHOCFGG Inter-RAT handover
InterRatHoState INTERRATHOSTATE
oup ROUP state
Service-based Inter-
ServiceIrHoCfgGr ServiceIrMeasM SERVICEIRHOCFGG SERVICEIRMEASMO
RAT HO Measure
oup ode ROUP DE
Mode
InterFreqMlbSwit INTERFREQMLBSWI
SpidCfg SPIDCFG InterFreq Mlb Switch
ch TCH
InterRatMlbSwitc INTERRATMLBSWITC
SpidCfg SPIDCFG InterRat Mlb Switch
h H
X2AutoSetupOpe X2AUTOSETUPOPER
Mcc MCC Mobile country code
rator ATOR
X2AutoSetupOpe X2AUTOSETUPOPER
Mnc MNC Mobile network code
rator ATOR
SCC Configuration
CaMgtCfg SccCfgInterval CAMGTCFG SCCCFGINTERVAL
Interval
CellBfMimoParaC CELLBFMIMOPARAC
LocalCellId LOCALCELLID Local cell ID
fg FG
PdschPaAdjSwit PDSCHPAADJSWITC
CellDlpcPdschPa CELLDLPCPDSCHPA PA adjusting switch
ch H
MimoAdaptiveS MIMOADAPTIVESWIT
CellMimoParaCfg CELLMIMOPARACFG MIMO Adaptive Switch
witch CH
CellPreallocGrou CELLPREALLOCGRO
LocalCellId LOCALCELLID Local cell ID
p UP
GERANINTERFARFC
GeranInterfArfcn LocalCellId LOCALCELLID Local cell ID
N
QciPriorityForDr QCIPRIORITYFORDR
CellStandardQci CELLSTANDARDQCI QCI Priority For DRX
x X
CAGROUPSCELLCF
CaGroupSCellCfg LocalCellId LOCALCELLID Local cell ID
G
CAGROUPSCELLCF
CaGroupSCellCfg SCelleNodeBId SCELLENODEBID SCell eNodeB ID
G
CAGROUPSCELLCF
CaGroupSCellCfg SCellLocalCellId SCELLLOCALCELLID SCell Local Cell ID
G
CAGROUPSCELLCF
CaGroupSCellCfg SCellPriority SCELLPRIORITY SCell Priority
G
CnOperatorNam
CnOperator CNOPERATOR CNOPERATORNAME CN Operator name
e
CnOperatorIpPat CNOPERATORIPPAT
IpPathId IPPATHID IP path ID
h H
CnOperatorIpPat CNOPERATORIPPAT
CnOperatorId CNOPERATORID CN Operator ID
h H
GLOBALPROCSWITC
GlobalProcSwitch LcgProfile LCGPROFILE LCG Profile
H
LicenseSharingP LICENSESHARINGPO
CnOperatorId CNOPERATORID CN Operator ID
olicy LICY
The proportion of the
LicenseSharingP MaxUserNumRa LICENSESHARINGPO
MAXUSERNUMRATE maximum number of
olicy te LICY
users
The proportion of the
LicenseSharingP UserNumSharin LICENSESHARINGPO USERNUMSHARING
sharing number of
olicy gRate LICY RATE
users
S1 S1Id S1 S1ID S1 ID
S1 Interface CP
S1Interface S1CpBearerId S1INTERFACE S1CPBEARERID
Bearer ID
X2 X2Id X2 X2ID X2 ID
X2 Interface CP
X2Interface X2CpBearerId X2INTERFACE X2CPBEARERID
Bearer ID
Short-cycle DRX
Drx ShortDrxSwitch DRX SHORTDRXSWITCH
switch
UlschPriorityFact ULSCHPRIORITYFAC
StandardQci STANDARDQCI Ulsch priority factor
or TOR
DlschPriorityFact DLSCHPRIORITYFAC
StandardQci STANDARDQCI Dlsch priority factor
or TOR
UserCqiPeriodCf USERCQIPERIODCF
CqiAdaptiveCfg CQIADAPTIVECFG User CQI period config
g G
MimoAdaptivePar MIMOADAPTIVEPAR
FixedMimoMode FIXEDMIMOMODE Fixed MIMO mode
aCfg ACFG
Repeat
ReptSyncAvoidI
CellAccess CELLACCESS REPTSYNCAVOIDIND Synchronization Avoid
nd
Indication
Repeat
ReptSyncAvoidT REPTSYNCAVOIDTIM
CellAccess CELLACCESS Synchronization Avoid
ime E
Time
Operator Ue Number
CellOp OpUeNumRatio CELLOP OPUENUMRATIO
Ratio
CellReselCdma2 CELLRESELCDMA20
LocalCellId LOCALCELLID Local cell ID
000 00
CellReselCdma2 CELLRESELCDMA20
SearchWndSize SEARCHWNDSIZE Search window size
000 00
P0NominalPUS
CellUlpcComm CELLULPCCOMM P0NOMINALPUSCH P0 nominal PUSCH
CH
EUCELLSECTOREQ
eUCellSectorEqm LocalCellId LOCALCELLID Local cell ID
M
EUCELLSECTOREQ
eUCellSectorEqm SectorEqmId SECTOREQMID Sector equipment ID
M
EuSectorEqmGro EUSECTOREQMGRO
LocalCellId LOCALCELLID Local cell ID
up UP
Uplink EARFCN
Cell UlEarfcnCfgInd CELL ULEARFCNCFGIND
indication
SubframeAssign SUBFRAMEASSIGNM
Cell CELL Subframe assignment
ment ENT
RootSequenceId
Cell CELL ROOTSEQUENCEIDX Root sequence index
x
Sector equipment
Cell SectorEqmNum CELL SECTOREQMNUM
number of SFN cell
MultiBand.FreqB
Cell MULTIBAND FREQBAND Frequency band
and
Baseband equipment
SfnAuxResBind BaseBandEqmId SFNAUXRESBIND BASEBANDEQMID
ID
SfnCellBind LocalCellId SFNCELLBIND LOCALCELLID Local cell ID
CellDynAcBarAlg CELLDYNACBARALG
LocalCellId LOCALCELLID Local Cell ID
oPara OPARA
Low power
CellLowPower LowPwrSwitch CELLLOWPOWER LOWPWRSWITCH consumption mode
switch
Low power
CellLowPower LowPwrOrder CELLLOWPOWER LOWPWRORDER consumption mode
order
ServiceAreaIdRe
CellMBMSCfg SERVICEAREAIDREF SERVICEAREAID Service Area ID
f.ServiceAreaId
CellPcAlgo LocalCellId CELLPCALGO LOCALCELLID Local Cell ID
Admission Control
AcReservedUser ACRESERVEDUSER
CellRacThd CELLRACTHD Reserved User
Number NUMBER
Number
CellServiceDiffCf CELLSERVICEDIFFC
LocalCellId LOCALCELLID Local cell ID
g FG
Uplink Scheduling
CellUlschAlgo UlschStrategy CELLULSCHALGO ULSCHSTRATEGY
Strategy
InterRatCellShutd INTERRATCELLSHUT
ShutDownType SHUTDOWNTYPE Shut Down Type
own DOWN
RruJointCalPara RRUJOINTCALPARA
LocalCellId LOCALCELLID Local cell ID
Cfg CFG
SoundingRS algorithm
CellAlgoSwitch SrsAlgoSwitch CELLALGOSWITCH SRSALGOSWITCH
switch
Load balancing
CellAlgoSwitch MlbAlgoSwitch CELLALGOSWITCH MLBALGOSWITCH
algorithm switch
Downlink power
CellAlgoSwitch DlPcAlgoSwitch CELLALGOSWITCH DLPCALGOSWITCH control algorithm
switch
Uplink power control
CellAlgoSwitch UlPcAlgoSwitch CELLALGOSWITCH ULPCALGOSWITCH
algorithm switch
UlCoMP algorithms
CellAlgoSwitch UlCompSwitch CELLALGOSWITCH ULCOMPSWITCH
switch
SFN UL Scheduling
CellAlgoSwitch SfnUlSchSwitch CELLALGOSWITCH SFNULSCHSWITCH
Switch
SFN DL Scheduling
CellAlgoSwitch SfnDlSchSwitch CELLALGOSWITCH SFNDLSCHSWITCH
Switch
PUCCH resource
PUSCHMaxRBP PUSCHMAXRBPUCC
CellAlgoSwitch CELLALGOSWITCH switch based on UL
UCCHAdjSwitch HADJSWITCH
peak rate
Load Balancing
CellAlgoSwitch MlbHoMode CELLALGOSWITCH MLBHOMODE
Handover Policy
UplinkCompSwit UPLINKCOMPSWITC
CellAlgoSwitch CELLALGOSWITCH Uplink Comp Switch
ch H
Enhanced MIMO
CellAlgoSwitch EnhMIMOSwitch CELLALGOSWITCH ENHMIMOSWITCH
Switch
Interference
InterfRandSwitc INTERFRANDSWITC
CellAlgoSwitch CELLALGOSWITCH Randomize Algorithm
h H
Switch
Downlink scheduling
CellDlschAlgo DlschStrategy CELLDLSCHALGO DLSCHSTRATEGY
Strategy
Downlink CA Schedule
CellDlschAlgo CaSchStrategy CELLDLSCHALGO CASCHSTRATEGY
Strategy
Ca Scc Doppler
CellDlschAlgo CaSccDopMeas CELLDLSCHALGO CASCCDOPMEAS
Measurement
Inter-Frequency
CellMLB InterFreqMlbThd CELLMLB INTERFREQMLBTHD Mobility Load
Balancing Threshold
Inter-RAT Mobility
CellMLB InterRatMlbThd CELLMLB INTERRATMLBTHD Load Balancing
Threshold
Inter-RAT Mobility
InterRatMlbUeN INTERRATMLBUENU
CellMLB CELLMLB Load Balancing UE
umThd MTHD
Number Threshold
Mobility Load
CellMLB MlbTriggerMode CELLMLB MLBTRIGGERMODE Balancing Trigger
Mode
Inter-frequency
InterFreqMlbUe INTERFREQMLBUEN Mobility Load
CellMLB CELLMLB
NumThd UMTHD Balancing UE Number
Threshold
Downlink Data-transfer
CellMLB DlDataMlbMode CELLMLB DLDATAMLBMODE
MLB mode
PDSCHCfg Pb PDSCHCFG PB PB
PwrRampingSte
RACHCfg RACHCFG PWRRAMPINGSTEP Power ramping step
p
PreambInitRcvT PREAMBINITRCVTAR Preamble initial
RACHCfg RACHCFG
argetPwr GETPWR received target power
PRACH Frequency
RACHCfg PrachFreqOffset RACHCFG PRACHFREQOFFSET
Offset
ACK/SRI Channel
PUCCHCfg NaSriChNum PUCCHCFG NASRICHNUM
Number
EutranExternalCe EUTRANEXTERNALC
Mcc MCC Mobile country code
llPlmn ELLPLMN
EutranExternalCe EUTRANEXTERNALC
Mnc MNC Mobile network code
llPlmn ELLPLMN
EutranExternalCe EUTRANEXTERNALC
eNodeBId ENODEBID eNodeB ID
llPlmn ELLPLMN
EutranExternalCe EUTRANEXTERNALC
CellId CELLID Cell ID
llPlmn ELLPLMN
EutranExternalCe EUTRANEXTERNALC Share mobile country
ShareMcc SHAREMCC
llPlmn ELLPLMN code
GeranExternalCel GERANEXTERNALCE
GeranCellId GERANCELLID GERAN cell ID
lPlmn LLPLMN
GeranExternalCel GERANEXTERNALCE
Lac LAC Location area code
lPlmn LLPLMN
GeranExternalCel GERANEXTERNALCE
Mcc MCC Mobile country code
lPlmn LLPLMN
GeranExternalCel GERANEXTERNALCE
Mnc MNC Mobile network code
lPlmn LLPLMN
UtranExternalCell UTRANEXTERNALCE
Mcc MCC Mobile country code
Plmn LLPLMN
UtranExternalCell UTRANEXTERNALCE
Mnc MNC Mobile network code
Plmn LLPLMN
UtranExternalCell UTRANEXTERNALCE
RncId RNCID RNC ID
Plmn LLPLMN
UtranExternalCell UTRANEXTERNALCE
CellId CELLID RNC cell ID
Plmn LLPLMN
Cdma2000HrpdE CDMA2000HRPDEXT
SectorId104 SECTORID104 SectorID104
xtCell CELL
Cdma2000HrpdE CDMA2000HRPDEXT
SectorId24 SECTORID24 SectorID24
xtCell CELL
Cdma2000HrpdE CDMA2000HRPDEXT
BandClass BANDCLASS Band class
xtCell CELL
Cdma2000HrpdE CDMA2000HRPDEXT
Frequency FREQUENCY Frequency
xtCell CELL
Cdma2000HrpdE CDMA2000HRPDEXT
Mcc MCC Mobile country code
xtCell CELL
Cdma2000HrpdE CDMA2000HRPDEXT
Mnc MNC Mobile network code
xtCell CELL
Cdma2000HrpdE CDMA2000HRPDEXT
PnOffset PNOFFSET Physical cell ID
xtCell CELL
Cdma2000HrpdE CDMA2000HRPDEXT
CellName CELLNAME Cell name
xtCell CELL
Cdma20001XrttE Cdma20001Xrtt CDMA20001XRTTEXT CDMA20001XRTTCEL CDMA20001XRTT cell
xtCell CellId CELL LID ID
Cdma20001XrttE CDMA20001XRTTEXT
BandClass BANDCLASS Band class
xtCell CELL
Cdma20001XrttE CDMA20001XRTTEXT
Frequency FREQUENCY Frequency
xtCell CELL
Cdma20001XrttE CDMA20001XRTTEXT
Sid SID System ID
xtCell CELL
Cdma20001XrttE CDMA20001XRTTEXT
Nid NID Network ID
xtCell CELL
Cdma20001XrttE CDMA20001XRTTEXT
Mcc MCC Mobile country code
xtCell CELL
Cdma20001XrttE CDMA20001XRTTEXT
Mnc MNC Mobile network code
xtCell CELL
Cdma20001XrttE CDMA20001XRTTEXT
PnOffset PNOFFSET Physical cell ID
xtCell CELL
Cdma20001XrttE CDMA20001XRTTEXT
CellName CELLNAME Cell name
xtCell CELL
Cdma20001XrttN CDMA20001XRTTNC
LocalCellId LOCALCELLID Local cell ID
Cell ELL
Cdma20001XrttN CDMA20001XRTTNC
BandClass BANDCLASS Band class
Cell ELL
Cdma20001XrttN CDMA20001XRTTNC
Frequency FREQUENCY Frequency
Cell ELL
Cdma20001XrttN CDMA20001XRTTNC
Sid SID System ID
Cell ELL
Cdma20001XrttN CDMA20001XRTTNC
Nid NID Network ID
Cell ELL
Cdma20001XrttN CDMA20001XRTTNC
NoHoFlag NOHOFLAG No handover indicator
Cell ELL
Cdma20001XrttN CDMA20001XRTTNC
NoRmvFlag NORMVFLAG No remove indicator
Cell ELL
Cdma20001XrttN CDMA20001XRTTNC
AnrFlag ANRFLAG ANR flag
Cell ELL
Cdma20001XrttN CDMA20001XRTTNC
LocalCellName LOCALCELLNAME Local cell name
Cell ELL
Cdma2000BandC CDMA2000BANDCLA
BandClass BANDCLASS Band class
lass SS
GeranExternalCel GERANEXTERNALCE
Mcc MCC Mobile country code
l LL
GeranExternalCel GERANEXTERNALCE
Mnc MNC Mobile network code
l LL
GeranExternalCel GERANEXTERNALCE
GeranCellId GERANCELLID GERAN cell ID
l LL
GeranExternalCel GERANEXTERNALCE
Lac LAC Location area code
l LL
GeranExternalCel GERANEXTERNALCE
BandIndicator BANDINDICATOR Band indicator
l LL
GeranExternalCel GERANEXTERNALCE
GeranArfcn GERANARFCN GERAN ARFCN
l LL
GeranExternalCel GERANEXTERNALCE
DtmInd DTMIND DTM indication
l LL
GeranExternalCel GERANEXTERNALCE
CellName CELLNAME Cell name
l LL
GERANNFREQGROU
GeranNfreqGroup LocalCellId LOCALCELLID Local cell ID
P
GERANNFREQGROU
GeranNfreqGroup BcchGroupId BCCHGROUPID BCCH group ID
P
GERANNFREQGROU
GeranNfreqGroup GeranVersion GERANVERSION GERAN version
P
GERANNFREQGROU
GeranNfreqGroup StartingArfcn STARTINGARFCN Starting ARFCN
P
GERANNFREQGROU
GeranNfreqGroup BandIndicator BANDINDICATOR Band indicator
P
GeranNfreqGroup GERANNFREQGROU
LocalCellId LOCALCELLID Local cell ID
Arfcn PARFCN
GeranNfreqGroup GERANNFREQGROU
BcchGroupId BCCHGROUPID BCCH group ID
Arfcn PARFCN
GeranNfreqGroup GERANNFREQGROU
GeranArfcn GERANARFCN GERAN ARFCN
Arfcn PARFCN
EutranIntraFreqN EUTRANINTRAFREQ
LocalCellId LOCALCELLID Local cell ID
Cell NCELL
EutranIntraFreqN EUTRANINTRAFREQ
Mcc MCC Mobile country code
Cell NCELL
EutranIntraFreqN EUTRANINTRAFREQ
Mnc MNC Mobile network code
Cell NCELL
EutranIntraFreqN EUTRANINTRAFREQ
eNodeBId ENODEBID eNodeB ID
Cell NCELL
EutranIntraFreqN EUTRANINTRAFREQ
CellId CELLID Cell ID
Cell NCELL
EutranIntraFreqN EUTRANINTRAFREQ
NoHoFlag NOHOFLAG No handover indicator
Cell NCELL
EutranIntraFreqN EUTRANINTRAFREQ
NoRmvFlag NORMVFLAG No remove indicator
Cell NCELL
EutranIntraFreqN EUTRANINTRAFREQ
LocalCellName LOCALCELLNAME Local cell name
Cell NCELL
EUTRANINTERNFRE
EutranInterNFreq LocalCellId LOCALCELLID Local cell ID
Q
EUTRANINTERNFRE
EutranInterNFreq DlEarfcn DLEARFCN Downlink EARFCN
Q
EUTRANINTERNFRE
EutranInterNFreq UlEarfcn ULEARFCN Uplink EARFCN
Q
EUTRANINTERNFRE Measurement
EutranInterNFreq MeasBandWidth MEASBANDWIDTH
Q bandwidth
EutranInterFreqN EUTRANINTERFREQ
Mcc MCC Mobile country code
Cell NCELL
EutranInterFreqN EUTRANINTERFREQ
Mnc MNC Mobile network code
Cell NCELL
EutranInterFreqN EUTRANINTERFREQ
eNodeBId ENODEBID eNodeB ID
Cell NCELL
EutranInterFreqN EUTRANINTERFREQ
CellId CELLID Cell ID
Cell NCELL
EutranInterFreqN EUTRANINTERFREQ
NoHoFlag NOHOFLAG No handover indicator
Cell NCELL
EutranInterFreqN EUTRANINTERFREQ
NoRmvFlag NORMVFLAG No remove indicator
Cell NCELL
EutranExternalCe EUTRANEXTERNALC
Mcc MCC Mobile country code
ll ELL
EutranExternalCe EUTRANEXTERNALC
Mnc MNC Mobile network code
ll ELL
EutranExternalCe EUTRANEXTERNALC
eNodeBId ENODEBID eNodeB ID
ll ELL
EutranExternalCe EUTRANEXTERNALC
CellId CELLID Cell ID
ll ELL
EutranExternalCe EUTRANEXTERNALC
DlEarfcn DLEARFCN Downlink EARFCN
ll ELL
EutranExternalCe EUTRANEXTERNALC
UlEarfcn ULEARFCN Uplink EARFCN
ll ELL
EutranExternalCe EUTRANEXTERNALC
PhyCellId PHYCELLID Physical cell ID
ll ELL
EutranExternalCe EUTRANEXTERNALC
Tac TAC Tracking area code
ll ELL
EutranExternalCe EUTRANEXTERNALC
CellName CELLNAME Cell name
ll ELL
EutranNFreqRan EUTRANNFREQRAN
LocalCellId LOCALCELLID Local cell ID
Share SHARE
EutranNFreqRan EUTRANNFREQRAN
DlEarfcn DLEARFCN Downlink EARFCN
Share SHARE
EutranNFreqRan EUTRANNFREQRAN
Mcc MCC Mobile country code
Share SHARE
EutranNFreqRan EUTRANNFREQRAN
Mnc MNC Mobile network code
Share SHARE
EutranNFreqRan CellReselPriority EUTRANNFREQRAN CELLRESELPRIORIT Cell reselection priority
Share CfgInd SHARE YCFGIND configure indicator
CELLRESELPRIORIT
GeranRanShare CellReselPriority GERANRANSHARE Cell reselection priority
Y
CELLRESELPRIORIT
UtranRanShare CellReselPriority UTRANRANSHARE Cell reselection priority
Y
UtranNFreq LocalCellId UTRANNFREQ LOCALCELLID Local cell ID
CELLRESELPRIORIT
UtranNFreq CellReselPriority UTRANNFREQ Cell reselection priority
Y
UTRANEXTERNALCE
UtranExternalCell Mcc MCC Mobile country code
LL
UTRANEXTERNALCE
UtranExternalCell Mnc MNC Mobile network code
LL
UTRANEXTERNALCE
UtranExternalCell RncId RNCID RNC ID
LL
UTRANEXTERNALCE
UtranExternalCell CellId CELLID RNC cell ID
LL
UTRANEXTERNALCE
UtranExternalCell UtranDlArfcn UTRANDLARFCN Downlink UARFCN
LL
UTRANEXTERNALCE
UtranExternalCell UtranUlArfcn UTRANULARFCN Uplink UARFCN
LL
UTRANEXTERNALCE
UtranExternalCell Lac LAC Location area code
LL
UTRANEXTERNALCE
UtranExternalCell CellName CELLNAME Cell name
LL
MultiBand.FreqB UTRANEXTERNALCE
UtranExternalCell FREQBAND Frequency band
and LL_MULTIBAND
BbCapabilityMod
FddResMode FDDRESMODE BBCAPABILITYMODE BbResCapacityMode
e
SfnCapabilityMo SFNCAPABILITYMOD
FddResMode FDDRESMODE SFN Capability Mode
de E
PCC Downlink
PccFreqCfg PccDlEarfcn PCCFREQCFG PCCDLEARFCN
EARFCN
PreferredPccPri PREFERREDPCCPRI
PccFreqCfg PCCFREQCFG Preferred PCC Priority
ority ORITY
PCC Downlink
SccFreqCfg PccDlEarfcn SCCFREQCFG PCCDLEARFCN
EARFCN
SCC Downlink
SccFreqCfg SccDlEarfcn SCCFREQCFG SCCDLEARFCN
EARFCN
CaUeChoseMod
ANR ANR CAUECHOSEMODE CA UE Chose Mode
e
Cluster Partition Node
PrtNodeBaseBa PRTNODEBASEBAN
EuCoSchCfg EUCOSCHCFG Base Band Equipment
ndEqmId DEQMID
Id
PreferredPCellPr PREFERREDPCELLP
CaGroupCell CAGROUPCELL Preferred PCell Priority
iority RIORITY
CSPC Algorithm
CspcAlgoPara CspcAlgoSwitch CSPCALGOPARA CSPCALGOSWITCH
Switch
ENodeBAlgoSwit ENODEBALGOSWITC
HoAlgoSwitch HOALGOSWITCH Handover Algo switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
HoModeSwitch HOMODESWITCH Handover Mode switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
DlIcicSwitch DLICICSWITCH DlIcic algorithm switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
AnrSwitch ANRSWITCH ANR algorithm switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
RedirectSwitch REDIRECTSWITCH Redirection switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
MroSwitch MROSWITCH MRO algorithm switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
TpeSwitch TPESWITCH TPE switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
UlIcicFreqSwitch ULICICFREQSWITCH UlIcic freq switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
LcsSwitch LCSSWITCH LCS switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
TrmSwitch TRMSWITCH TRM switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
RimSwitch RIMSWITCH RIM switch
ch H
ANR Under RAN
ENodeBAlgoSwit RanSharingAnrS ENODEBALGOSWITC RANSHARINGANRS
Sharing Algorithm
ch witch H WITCH
Switch
ENodeBAlgoSwit ENODEBALGOSWITC Frequency Layer
FreqLayerSwtich FREQLAYERSWTICH
ch H Switch
ENodeBAlgoSwit ENODEBALGOSWITC
CmasSwitch CMASSWITCH Cmas Switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
CaAlgoSwitch CAALGOSWITCH CA Algorithm Switch
ch H
ENodeBAlgoSwit ENODEBALGOSWITC
MlbAlgoSwitch MLBALGOSWITCH MLB Algorithm Switch
ch H
LicRatioSharePoli LICRATIOSHAREPOL
CnOperatorId CNOPERATORID CN Operator ID
cy ICY
LicRatioSharePoli LICRATIOSHAREPOL
TrfRatio TRFRATIO TrfRatio
cy ICY
EUTRANEXTERNALC
None None CELLID Cell ID
ELL_MULTIBAND
EUTRANEXTERNALC
None None ENODEBID eNodeB ID
ELL_MULTIBAND
EUTRANEXTERNALC
None None MCC Mobile country code
ELL_MULTIBAND
EUTRANEXTERNALC
None None MNC Mobile network code
ELL_MULTIBAND
SECONDARYOPIDTY CNOPSHARINGGRO
None None Secondary Operator Id
PE UPID
SECTORANTENNAR
None None SECTORID Sector ID
EF
SECTOREQMANTEN
None None SECTOREQMID Sector Equipment ID
NAREF
SECTOREQMREFTY
None None LOCALCELLID Local cell ID
PE
USERPLANEHOSTRE
None None EPGROUPID EndPoint Group ID
F
USERPLANEPEERRE
None None EPGROUPID EndPoint Group ID
F
UTRANEXTERNALCE
None None CELLID RNC cell ID
LL_MULTIBAND
UTRANEXTERNALCE
None None MCC Mobile country code
LL_MULTIBAND
UTRANEXTERNALCE
None None MNC Mobile network code
LL_MULTIBAND
UTRANEXTERNALCE
None None RNCID RNC ID
LL_MULTIBAND
removes the neighbor
relationships with the
cells from the NRT.
UTRAN_DELERRORN
CELL: If this switch is
on, the eNodeB
Indicates
periodically whether
performs
information
detection of about
NE MML Command Indicates Meaning
intra-frequency whether IsKey
inappropriate
information
neighboringabout
neighboring cells
UTRAN and
BTS3900, BTS3900 MOD ANR inter-frequency
external
Indicates cells
whether of the
cells
Indicatesfor which
thecells the
maximum NO
LTE LST ANR neighboring
serving can beand
incomingcell
information
number of about
handover
ADD
ADD CELL external
maintained
neighboring
success cells
rateby isANR.
GERAN less If
BTS3900, BTS3900 EUTRANINTERNFRE synchronized
configured on UEs the
MOD CELL this
cells
than parameter
supportedand
the by a set to
external
related is NO
LTE Q frequency associated
LST CELL ALLOWED,
GERAN
threshold
baseband cells
and theremoves
processing
ADD
MOD with the serving
information can cell
be
BTS3900, BTS3900 configured
the
unit external
(BBP). oncell
This the
GERANNFREQGROU
EUTRANINTERNFRE can be
maintained maintainedby ANR. byIf NO
LTE frequency
entries of whether
Indicates
parameter group
the cells and
currently
P
Q ANR.
this If this
parameter parameter
MOD
LST
associated
neighbor
information
applies
is setthe toonly to the to
with
relationships
about
ALLOWED,
istheset
BTS3900, BTS3900 NOT_ALLOWED,
serving
with
neighboring
scenario cell
cells
wherecan from
UTRAN bethe
all the
GERANNFREQGROU
EUTRANINTERNFRE
MOD the information
information cannot can be NO
LTE
P
Q
maintained
NCL
cells
cells and
maintained
NRT, by
external
established by
ANR.
ANR. in be anIf
Ifto
GLOBALPROCSWITC maintained
this parameter
respectively.
UTRAN cells by ANR.
is set
LST LBBPd
this are configured
parameter is set to
BTS3900, BTS3900 H ALLOWED,
GERAN_DELERROR
configured thethe
GERANNFREQGROU with normalon
NOT_ALLOWED, cyclic the NO
LTE LST information
NCELL:
frequency If can
this be
switch is
P prefix
information(CP)associated
in an LTE
cannot beIf
GLOBALPROCSWITC
ADD UTRANNFREQ maintained
on,
with the
the eNodeB
servingby ANR.
cell
BTS3900, BTS3900 FDD
Indicatesmacro
maintained
Indicates the
the eNodeB.
by common
ANR.
additional If
H
MOD UTRANNFREQ this parameter
periodically
can beofmaintained performsis set byto NO
LTE the
name
information the certificate
LST UTRANNFREQ NOT_ALLOWED,
detection
ANR. If this of about
PucchPeriodicCqiOptS
request file, which the
parameter a
can
BTS3900, BTS3900 certificate
information
inappropriate
is set common
toelectronic cannot
ALLOWED, be
MOD CERTREQ witch
be
name.the parameter
The information is set
serial
WCDMA, BTS3900 maintained
neighboring
the
to information
OFF, the by
GERAN ANR.
parametercan be NO
LST CERTREQ number
will beforadded(ESN), media
LTE cells
maintained
value
access which
control bybehind
the
ANR.
(MAC) If
BTS3900, BTS3900 the value
incoming
this parameter of theis set to
handover
MOD CERTREQ MAX_SYNC_USER_1
address, or IP address
WCDMA, BTS3900 COMMNAME
success
NOT_ALLOWED, rate is less NO
LTE
LST CERTREQ 200
of a takes
board.
parameter effect
tocannot
composenothe
than the
information
matter of related
the actual be
BTS3900, BTS3900 a complete common
MOD CERTREQ threshold
Indicates
maintained
parameter the
and bycountry
setting.removes
ANR.
WCDMA, BTS3900 name for a certificate NO
LST CERTREQ the external
where a BS is
cell located.
LTE request file. The
BTS3900, BTS3900 entries
Indicates and the neighbor
MOD CERTREQ default
relationshipsvalue withowns the
WCDMA, BTS3900 organization
is .huawei.com. that NO
LST CERTREQ cells from the NCL and
LTE a BS.
BTS3900, BTS3900 NRT,
Indicates respectively.
the
MOD CERTREQ If event-triggered ANR
WCDMA, BTS3900 organization unit that NO
LST CERTREQ and automatic
LTE owns a BS.
BTS3900, BTS3900 Indicates the state or
neighbor relationship
MOD CERTREQ Indicates theanusage
WCDMA, BTS3900 province
removal for where a BSfor
RAT is NO
LST CERTREQ a key, including
LTE located.
are enabled, the
BTS3900, BTS3900 KEY_AGREEMENT
inappropriate
MOD CERTREQ Indicates
(key the location
negotiation),
WCDMA, BTS3900 neighboring NO
LTE
LST CERTREQ of a BS.
Indicates
DATA_ENCIPHERME thecell signature
configuration
algorithm for aremoval
BTS3900, BTS3900 MOD CERTREQ NT (data
function encryption),
automatically
WCDMA, BTS3900 LST CERTFILE certificate
KEY_ENCIPHERMEN request file. NO
takes
Indicates
The effect.
signature theIflocal the
LTE LST CERTREQ T (key
number
name ofencryption),
of
a BS.
external This and
BTS3900, BTS3900 MOD CERTREQ algorithm
DIGITAL_SIGNATURE can be
WCDMA, BTS3900 LST CERTFILE cells
parameter
Secure or neighbor
Hash is usedAlgorithm to NO
(digital
relationships
generate signature).
the of
DNS an This
LTE LST CERTREQ 1 (SHA1), Message-
parameter canthe be set
BTS3900, BTS3900 MOD CERTREQ RAT
name
Indicates
Digest reaches
of the
thesubject
Algorithm length 5 of
to one or
specifications,
alternative multiple
name theHash
of
WCDMA, BTS3900 UPD DEVCERT Indicates
a key,
(MD5)
values. which
or whether
Secure can betoa NO
LTE LST CERTREQ inappropriate
certificate,
update
1024
Algorithm bitstheor so
256CRL as
2048atbits.to the
BTS3900, BTS3900 MOD CERTREQ neighboring
verify
next the peer's
update
(SHA256). cell
time
WCDMA, BTS3900 LST CERTFILE configuration
identification
specified in the inremoval
IKE
CRL NO
LTE LST CERTREQ function
negotiation.
that and
Indicates the IP during
is obtained Ifthethis
BTS3900, BTS3900 redundant
parameter
the latestofupdate.neighboring
is not If
MOD CERTREQ address the subject
WCDMA, BTS3900 cell
this configuration
configured,
parameter the isBS set NO
LST CERTREQ alternative name of ato
LTE removal
automatically
ENABLE, function
the uses BS are the
BTS3900, BTS3900 certificate.
ADD CRLTSK common nameupdates
automatically triggered
and its
WCDMA, BTS3900 when
additionalnew external
information NO
LST CRLTSK the CRL
Indicates when
the the next
interval
LTE cells
to or neighbor
BTS3900, BTS3900 at which the BS DNS
generate
update time the
specified
ADD CRLTSK relationships
name.
in the CRL arrives. need to
If
WCDMA, BTS3900 automatically obtains NO
LST CRLTSK be
this added.
parameter is set to
LTE the CRL
Indicates from
whether the FTP
a
BTS3900, BTS3900 DISABLE,
server the BS
SET CERTCHKTSK task of or
automatically
LDAP server.
certificate updates
WCDMA, BTS3900 NO
LST CERTCHKTSK validity
the CRLchecking based on is the
LTE
started.
configured updating
period.
Indicates the method
for updating a
Indicates
certificatethe thatthreshold
has
for a certificate
expired or is about to
BTS3900, BTS3900 expiration
Indicates
expire. There alarm.
the are Ifthree
interval the
SET CERTCHKTSK eNodeB detects that
WCDMA, BTS3900 between
methods: PROXY, certificate NO
LST CERTCHKTSK the interval between
LTE validity
CMP and checking
MANUAL. Ifits
tasks.
BTS3900, BTS3900 current
the PROXY time methodand the is
SET CERTCHKTSK
WCDMA, BTS3900 expiration
used, the BS date uses of an the NO
LST CERTCHKTSK
LTE activated
U2000 as device
the proxy
BTS3900, BTS3900 Indicates
certificate whether
iscertificate
shorter toto
SET CERTCHKTSK update
Indicates
match the the
the fragmentan
WCDMA, BTS3900 than the NO
LST CERTCHKTSK from the threshold,
deployment
message. Certificate
The position
ACL of
LTE Imminent Certificate
BTS3900, BTS3900 ADD ACLRULE Authority
a digital
rules for (CA).
certificate.
matching If theIf
Expiry
CMP
this alarm isisisused,
method
parameter set to
WCDMA, BTS3900 DSP ACLRULE fragment
reported. messages NO
LTE LST ACLRULE the BS
DEFAULT, directly
apply to only packet the
BTS3900, BTS3900 updates
certificate
filtering and the certificate
is does
configured not
SET CERTDEPLOY from the CA.IPSec If the
WCDMA, BTS3900 on
applythe tomain
the control NO
LST CERTDEPLOY MANUAL method is
LTE board.
function. If this
BTS3900, BTS3900 Indicates
used, the the
parameter number
certificate
is set to
SET CERTDEPLOY
WCDMA, BTS3900 of the cabinet
needs
SPECIFIC, to bethe where a
updated NO
LST CERTDEPLOY
LTE board
manually
certificateis located.
instead
is configured of
BTS3900, BTS3900 Indicates
automatically.
on the board the in numberthe
SET CERTDEPLOY Indicates the rule for a
WCDMA, BTS3900 of the subrack
specified slot. where NO
LST CERTDEPLOY prioritizing traffic to
LTE board is located.
BTS3900, BTS3900 meet
Indicatesservice the number
SET CERTDEPLOY requirements. If this
WCDMA, BTS3900 of the slot where a NO
LST CERTDEPLOY parameter is set to
LTE board is located.
BTS3900, BTS3900 IPPRECEDENCE, the
SET DIFPRI
WCDMA, BTS3900 protocol
Indicatesstack of the of
the priority NO
LST DIFPRI
LTE earlier version
signaling. The priority is
BTS3900, BTS3900 adopted, which firstlyof
SET DIFPRI has a positive
Indicates the priority
WCDMA, BTS3900 converts
Indicates a Type
the priorityof of NO
LST DIFPRI correlation
the low-level
Indicates thewithOM the
priority data,
of
LTE Service
the (TOS)
high-level OMto a
BTS3900, BTS3900 value
such
the IP of
as this
the data
clock. If the toIPbe
SET DIFPRI DSCP
data. and
The or
parameter.
uploaded then
priority has a
WCDMA, BTS3900 clock that
prioritizes follows
traffic. the NO
LST DIFPRI positive
downloaded. correlation The
LTE Precision Time
BTS3900, BTS3900 with thehas
priority value of this
a positive
SET DIFPRI Protocol
parameter. (PTP) is used,
WCDMA, BTS3900 correlation
set this parameter with theto NO
LST DIFPRI
LTE value
the DSCP of this of the PTP
BTS3900, BTS3900 parameter. TheIPlow-
SET DIFPRI packets. If the clock
WCDMA, BTS3900 level OM data NO
LST DIFPRI that follows theincludes
LTE the packets related to
BTS3900, BTS3900 DSP DSCPMAP Huawei proprietary
File Transfer
Indicates
protocol is used, the Protocol
index setof
WCDMA, BTS3900 LST DSCPMAP (FTP). YES
a VRF instance.
this parameter
Indicates the priorityto the of
LTE SET DSCPMAP
BTS3900, BTS3900 DSP DSCPMAP DSCP
a DSCP. of these
A larger
WCDMA, BTS3900 LST DSCPMAP packets
value of that follow the
this parameter YES
LTE SET DSCPMAP Indicates
indicates athe
Huawei proprietary priority of
higher
BTS3900, BTS3900 SET DSCPMAP a VLAN. A larger value
protocol.
priority.
WCDMA, BTS3900 DSP
ADD DSCPMAP
ETHTRK of this parameter NO
LTE LST
DSP DSCPMAP
ETHTRK indicates
Indicates athe
Indicates the higher
type
cabinet of
BTS3900, BTS3900 priority.
Ethernet trunk.
MOD ETHTRK number of the board
WCDMA, BTS3900 ADD If this parameter is set YES
RMV ETHTRK
ETHTRK where
Indicates thethe Ethernet
number
LTE DSP ETHTRK to DISABLE, the
BTS3900, BTS3900 RST ETHTRK trunk
of is established.
the subrack housing
MOD ETHTRK
LST ETHTRK trunk's status can not
WCDMA, BTS3900 ADD the board
Indicates where
notifiedwhether the the to YES
RMV ETHTRK
ETHTRK be
Indicates
Indicates the
theto number
number other
LTE DSP ETHTRK Ethernet
enable
end, the
member trunkARP isproxy
ports of
BTS3900, BTS3900 RST ETHTRK of
of the
the Ethernet
slot
MOD ETHTRK
LST ETHTRK
established.
function
the Ethernet
trunk.When onhousing
thetrunk
the board
the
WCDMA, BTS3900 ADD board where theIf this YES
RMV ETHTRK
ETHTRK Ethernet
must
is trunk.
be manually
a UTRPc board,
LTE DSP ETHTRK Ethernet
parameter trunk is to the
isInparameter
set
BTS3900, BTS3900 RST ETHTRK configured.
value of this this
MOD ETHTRK established.
ENABLE, the0BS
WCDMA, BTS3900 LST ETHTRK case,
rangesthe from configuredto 2. YES
RMV ETHTRK
ADD ETHTRK performs
member the
ports ARP
areis a
LTE When the board
RST
MODETHTRK proxy
BTS3900, BTS3900 ETHTRK board on
considered other theas IPvalid
than the
WCDMA, BTS3900 LST
DSP ETHTRK
DHCPRSLT addresses
member portsits
of of
UTRPc board, thethe NO
LTE DSP ETHTRK loopback
Ethernet
value of this interfaces
trunk. parameter (or
ADD ETHTRK
BTS3900, BTS3900 LST of the lower-level BS).
MODETHTRK
ETHTRK If this parameter
ranges from 0 to 1. is set
WCDMA, BTS3900 If
tothis parameter
ENABLE, member is set NO
DSP ETHTRK
LTE to DISABLE,
ports of the Ethernet the BS
LST ETHTRK
does
trunk notmust perform
also bethe
ARP proxy
manually configured. on the IP
addresses
In this case,ofthe its valid
loopback
member ports interfacesof the(or
of the lower-level
Ethernet trunk areBS).
The external
negotiated device on
between
configuration
the UMPT, LMPT, modeand of
transmission
UTRPc, the value resource of
groups
this parameter in the BS, ranges
which
from 46 to be can 1800. set For to
SINGLE_RATE
the WMPT, UQEC, or
ADD ETHTRK DUAL_RATE.
and UEOC, theThe value
DSP ETHTRK Indicates
dual
of thisrate
Indicates the
the type
configuration
parameter period of
BTS3900, BTS3900
MOD ETHTRK subboard
refers
rangeswhich
during to the
from 46 on the
hybrid board
thetoactive of
WCDMA, BTS3900 YES
RMV ETHTRK where
the
1500.
and peak the
standby Ethernet
information
If this parameter routes are
LTE ADD ETHTRK
BTS3900, BTS3900 RST ETHTRK trunk
rate
is
switched is
set(PIR)to established.
aover and twice.
value
MOD ETHTRK
LST ETHTRK committed information
WCDMA, BTS3900 greater
This period than the
indicates NO
DSP ETHTRK rate (CIR).allowed Ifbetween
this
LTE maximum
the interval
BTS3900, BTS3900 LST ETHTRK parameter is set to
SET GTRANSPARA value,
the time the maximum
single-hop
WCDMA, BTS3900 SINGLE_RATE,
allowed
BFD detects valuethat takes the
an NO
LST GTRANSPARA
LTE transmission
effect. A
active route changesvalue resource
greater
BTS3900, BTS3900 group
than performs traffic
SET GTRANSPARA from or DOWN equaltotoUP 776and is
WCDMA, BTS3900 shaping
recommended, based on its NO
LST GTRANSPARA the time
Indicates the active
the life cycle
LTE transmit
because bandwidth.
broadcast If
BTS3900, BTS3900 SET IKECFG route
of an becomes
ISAKMP SA.
this
packets,parameter
Indicates
available. the
such
During IKE
asis set local to
WCDMA, BTS3900 DSP IKECFG ISAKMP
Indicates
DUAL_RATE,
name. refers
the time
thetothe NO
LTE LST IKECFG DHCP
switchover, packets, if the may
Internet
interval
transmission Security
for sending
resource the
BTS3900, BTS3900 SET IKECFG experience
previous standbyreception route
Association
keepalive
group performs andtraffic
packets. Key If
WCDMA, BTS3900 DSP IKECFG or transmission
becomes faulty, failures
the NO
Management
Indicates
the
shapingparameter the
based Protocol,
timeout
ison10set PIR to
LTE LST IKECFG if the
system maximum
waits for
and
duration
0,
and SA
keepalive
the refers
for to for
waiting
transmission packets
BTS3900, BTS3900 SET IKECFG transmission
seconds
Indicates the unit
and then
IKE is
security
the
are keepalive
not sent.
admission association.
algorithmpackets.
WCDMA, BTS3900 DSP IKECFG smaller
switches
exchange thanback
mode. 776. to the
In NO
IKE
If thisnegotiation
ensures parameter
thatkeys the non- is set
LTE LST IKECFG active
main
requires route.
mode, a long time areto
BTS3900, BTS3900 SET IKECFG to 0, keepalive
flow-controllable
Indicates the DSCP for packets
traffic
exchanged
calculate
are not Diffie-
WCDMA, BTS3900 DSP IKECFG does
IKE notsent.
negotiation
independently exceed from CIR. NO
LTE LST IKECFG Hellman
packets.
Indicates (DH)
the keys.
perfect It
ADD IKEPEER identity
is recommended that
BTS3900, BTS3900 forward secrecy (PFS)
MOD IKEPEER authentications.
Indicates
this parameter whether beThis to
set
WCDMA, BTS3900 value. In the second NO
DSP IKEPEER protects
use the
to greater identity
PING than 10
LTE ADD IKEPROPOSAL phase of IPSec
BTS3900, BTS3900 LST IKEPEER information
detection
minutes sotothat and
check hence an
negotiation,
MOD IKEPROPOSAL enhances
IP path.of the PFSthe
security.
WCDMA, BTS3900 update ISAKMP NO
DSP IKEPROPOSAL enables
The
Generallyaggressivethe used BS to to
mode use
LTE SAkey does not affect the
LST IKEPROPOSAL adoes
detect that
not the is
have not identity
connectivity
secure
derived communication.
from the
BTS3900 LTE None authentication
of the IP
Before
Indicates the path,SA
whether thefirst-
life the NO
phase
protection.
PING key,
detection ensuring will fail
ADD IPPATH cycle
IPMUX
that elapses,
the function
two keys local
isare
BTS3900, BTS3900 if the
Indicates firewall the disables
length
WCDMA, BTS3900
MOD IPPATH and peer
enabled on IPofpaths.
independent
the PING
ends
function.This eachof
will
NO
DSP IPPATH The
other. IPMUX
negotiateLTE withtimer,
currently
According each
LTE
LST parameter
which
other todefines
generatewill the beto a a
BTS3900, BTS3900 ADDIPPATH
IPPATH does
PFS,
removed
not
a key support
from protectslater
this
maximum
new
function.
unique SA to
setthe buffer
replace
of lifedata. time the
The
WCDMA, BTS3900 MOD IPPATH Indicates
Indicates
versions. the maximum cycle NO
for IPMUX
original
elements one. packets.
used The to new
LTE LST IPPATH of an
multiframe IPSec SA.
length An of
BTS3900, BTS3900 ADD IPPATH The
SA isLTE
generate used currently
keys upon are not
IPSec
IPMUX.
does notSA The becomes
support LTE
WCDMA, BTS3900 MOD IPPATH completion
reusable. If of
a the the
key NO
invalid
Indicates
currently
IPMUX once theand
does
function. its lifeis
maximum
not
LTE LST IPPATH negotiation,
decrypted, other the
keys
cycle
subframe
support specified
the lengthIPMUX by of this
BTS3900, BTS3900 ADD IPPATH original
Indicates
are still SA the
secure. is
parameter
IPMUX.
function. The elapses.
LTE
WCDMA, BTS3900 MOD IPPATH automatically
configuration removed
mode NO
If the IPSec
Before
currently
once its
the does
life
lifepolicy
cycle not isof
cycle of
LTE LST IPPATH
ADD IPSECPOLICY the
used IPSec
Indicates
an IPSectheto SA
the
initiate
SAIPMUX life
traffic
IPSec
elapses,
BTS3900, BTS3900 support
Indicates
elapses. the size of
MOD IPSECPOLICY cycle.
volume
negotiation,
the IPSec
function. If threshold
this policy
packetparameter
a PFS for
isanti-
WCDMA, BTS3900 Indicates
is
the setIPSecto the
GLOBAL,
policy, the NO
DSP IPSECPOLICY exchange
used in an
replay window.mode is launched.
attempt If the toof
LTE ADD IPSECPOLICY encapsulation
default
above SA
which life cycle is
BTS3900, BTS3900 LST IPSECPOLICY If the PFS
establish
value of a
this isnew assigned
parameterIPSec
MOD IPSECPOLICY an
used.
to
SA
IPSec
negotiation
the In
local
through thisproposal,
for
end,case, a
negotiation new
then LTS
WCDMA, BTS3900 is set
which tocan 0, be the IPSec
set NO
DSP IPSECPOLICY and
IPSec
the
to LTKB
PFS
ensure SA are
is
exchange
secure settotois
started.
LTE ADD IPSECPOLICY packet
TUNNEL anti-replay
or0values
BTS3900, BTS3900 LST IPSECPOLICY the
The default
required value
transmission; when indicates
the If
before
MOD IPSECPOLICY function
TRANSPORT.
3600
that and
is
the function,
negotiation
disabled.
69120000,
isthis In which
launched
WCDMA, BTS3900 the negotiation
value
TRANSPORT of is
mode, NO
DSP IPSECPOLICY respectively.
initiates
at the peer negotiation
end. If this
The for
LTE ADD IPSECPOLICY complete,
parameter
only data the
is is setoriginal
encrypted. to 32,
BTS3900, BTS3900 LST IPSECPOLICY parameter
a
DH new group IPSec is
assignedset
SA to
based to
IPSec
MOD IPSECPOLICY 64,
In 128,
TUNNEL SA256, is mode,
still
512, used. the
WCDMA, BTS3900 LOCAL,
on
the
After
1024, the
local
the2048 the
traffic
end SA
negotiation
or volume,
and lifethe
4096, is NO
DSP IPSECPOLICY whole
cycle is IP packet
configurable. is
LTE ADD IPSECPOLICY is
peerdisabled.
complete,
the end should
system the But
checks new when
beSA the
BTS3900, BTS3900 LST IPSECPOLICY protected, and a new
MOD IPSECPOLICY BS
ADD same.
is
IP
actsOtherwise,
immediately
whether
header
as
the is
initiator
addedused.
packets in
the
tois
WCDMA, BTS3900 IPSECPROPOSAL IKEv1
negotiation
IPSec and
SA this
fails.
negotiation valueThe NO
DSP IPSECPOLICY are
the duplicate
original IP in the
packet.
LTE MOD set
takes to a0,period.
security ifA the
level ofTo theis
BTS3900, BTS3900 LST IPSECPOLICY window.
The source packet
IP address
IPSECPROPOSAL responder
1024-bit
prevent
discarded insists
it has or
Diffie-Hellman
SAif updating a IP
WCDMA, BTS3900 and
enforces
group the destination
the
(Dh-group2) IPSec SA
is NO
DSP from
duplicate affecting packet or its
LTE address
traffic
higher thanof the
lifetime that to newBS,
of IP
the
BTS3900, BTS3900 IPSECPROPOSAL
ADD MPGRP communication
sequence
Indicates number
the is
header
BS
768-bitwill are
enable the
Diffie-Hellman IP
this
WCDMA, BTS3900 LST
MOD MPGRP security,
smaller
authentication thana life any cycle
type of NO
addresses
function
group tothe
(Dh-group1).of
avoid two ends
LTE IPSECPROPOSAL
LST MPGRP longer
packet
the MLPPP than
in 900 window.
group.
of the
service
However, security
break a longer tunnel.
down.if
seconds
The
Both the is
window TRANSPORT slides
processing
recommended.
the sequence time is
number
mode
required and bythe the Dh-
of the
TUNNEL packet mode are is larger
group2.
than
used any packet that is
for end-to-end
received
IPSec protection. in the The
window.
TUNNEL mode,
ADD MPGRP
BTS3900, BTS3900 Indicates whether to
MOD MPGRP
WCDMA, BTS3900 enable PPP multi- NO
DSP MPGRP
LTE frame multiplexing.
BTS3900, BTS3900 LST MPGRP
ADD MPGRP Indicates the fragment
WCDMA, BTS3900 MOD MPGRP size of an MLPPP NO
LTE LST MPGRP group.
BTS3900, BTS3900 ADD MPGRP Indicates the maximum
WCDMA, BTS3900 MOD MPGRP length of the PPP NO
LTE LST MPGRP MUX subframe.
Indicates the timeout
BTS3900, BTS3900 ADD MPGRP Indicates
duration ofthe maximum
a PPP
WCDMA, BTS3900 MOD MPGRP length of the
MUX combination. If PPP NO
LTE LST MPGRP MUX
the PPPframe.MUX
BTS3900, BTS3900 ADD MPGRP
combination takes
WCDMA, BTS3900 MOD MPGRP NO
longer time than this
LTE LST MPGRP Indicates
BTS3900, BTS3900 ADD MPGRP parameterthe threshold
value, an
above which
alarm related to the the
WCDMA, BTS3900 MOD MPGRP NO
MLPPP
PPP MUX packet loss
combination
LTE LST MPGRP Indicates the threshold
BTS3900, BTS3900 ADD MPGRP alarm
timeout is isgenerated.
reported.
below
Indicateswhich the theMaximum
WCDMA, BTS3900 MOD MPGRP NO
MLPPP packet
Receive Unit (MRU). loss
LTE LST MPGRP
BTS3900, BTS3900 ADD MPLNK alarm is cleared.
The received packet
WCDMA, BTS3900 DSP MPLNK whose length is NO
LTE LST MPLNK greater than this
BTS3900, BTS3900 ADD MPLNK Indicates
parameterwhether value isto
WCDMA, BTS3900 DSP MPLNK enable
discarded.protocol field NO
LTE LST MPLNK Indicates
compression. whether to
BTS3900, BTS3900 ADD MPLNK enable the
WCDMA, BTS3900 DSP MPLNK compression of the NO
LTE LST MPLNK address field and
BTS3900, BTS3900 Indicates
control field. the timeout
ADD MPLNK
WCDMA, BTS3900 duration of the MLPPP NO
LST MPLNK Indicates the number
LTE link negotiation.
BTS3900, BTS3900 DSP PORTSECURITY of the cabinet that
WCDMA, BTS3900 SET PORTSECURITY houses the board YES
LTE LST PORTSECURITY Indicates
where portthe
Indicates the number
security
mode is in
BTS3900, BTS3900 DSP PORTSECURITY of the
enabled.
which subrack
the localthat end of
WCDMA, BTS3900 SET PORTSECURITY houses
a PPP linkthe board YES
LTE LST PORTSECURITY Indicates
where port the number
security is
BTS3900, BTS3900 DSP PORTSECURITY authenticates
of the slot the peer
enabled.
end. The
WCDMA, BTS3900 SET PORTSECURITY corresponding to the YES
LTE LST PORTSECURITY authentication
board where mode is
port
Indicates
classified the
into type
No of
BTS3900, BTS3900 DSP PORTSECURITY security is enabled.
sub-board
authentication, on the
WCDMA, BTS3900 SET PORTSECURITY YES
board
Passwordwhere port
LTE LST PORTSECURITY
BTS3900, BTS3900 DSP PORTSECURITY security
Indicatesisthe
Authentication enabled.
type of
WCDMA, BTS3900 SET PORTSECURITY Protocol(PAP)
port on which port YES
LTE LST PORTSECURITY Indicates
security iswhether
authentication, enabled.andto
Indicates
disable the
services number
on a
BTS3900, BTS3900 DSP PORTSECURITY Challenge and shake
of the portport
specified on which
to
WCDMA, BTS3900 SET PORTSECURITY Authentication YES
port security
implement portis
LTE LST PORTSECURITY Protocol(CHAP)
BTS3900, BTS3900 SET PORTSECURITY configured.
security. If this
authentication. In PAP
WCDMA, BTS3900 DSP PORTSECURITY parameter
mode, userisnames set to and NO
LTE LST PORTSECURITY DISABLE,
Indicates
passwords are running
whether to
BTS3900, BTS3900 ADD PPPLNK services
transmitted explicitlyis
enable theon the
PPP port
WCDMA, BTS3900 MOD PPPLNK prohibited,
multiframe thereby
multiplexing NO
on the network. If they
LTE LST
ADDPPPLNK
PPPLNK guaranteeing
function. If thisthe
BTS3900, BTS3900 are intercepted during
MOD PPPLNK security
parameter of the
transmission, is setaport.
to
great
WCDMA, BTS3900 NO
DSP PPPLNK ENABLE,
threat to network PPP
multiple
LTE Indicates
BTS3900, BTS3900 LST
ADDPPPLNK
PPPLNK frames
securityare isthe maximum
multiplexed
caused.
length
on of
thethe
Thus, PPP the
PAP PPP
link isto
WCDMA, BTS3900 MOD PPPLNK NO
Multiplexing
reduce
applied the (MUX)
onlybandwidth
to the
LTE LST PPPLNK
BTS3900, BTS3900 ADD PPPLNK subframe.
overhead.
Indicates the maximum
network environment
WCDMA, BTS3900 MOD PPPLNK length
with low ofsecurity
the PPP NO
LTE LST PPPLNK MUX frame. With
requirements.
three handshakes, the
CHAP provides a more
secure authentication.
In CHAP mode, only
user accounts rather
than passwords are
BTS3900, BTS3900 ADD PPPLNK Indicates the timeout
WCDMA, BTS3900 MOD PPPLNK duration
Indicatesofthe theMaximum PPP NO
LTE LST
ADDPPPLNK
PPPLNK MUX combination.
Receive Unit (MRU). If
BTS3900, BTS3900
MOD PPPLNK the size of a received
WCDMA, BTS3900 NO
DSP PPPLNK packet is greater than
LTE ADD PPPLNK
BTS3900, BTS3900 LST PPPLNK the MRU value,
Indicates whether theto
MOD PPPLNK packet is discarded.
WCDMA, BTS3900 enable protocol field NO
DSP PPPLNK Indicates whether to
LTE ADD PPPLNK compression.
BTS3900, BTS3900 LST PPPLNK enable the
MOD PPPLNK Indicates whether
WCDMA, BTS3900 compression of theto NO
DSP PPPLNK enable
LTE addressthe field dynamic
and
BTS3900, BTS3900 LST
ADDPPPLNK
PPPLNK Indicates
adjustment the oftimeout
the RX
control field.
WCDMA, BTS3900 MOD PPPLNK duration forofthe
bandwidth a PPP NO
LTE LST PPPLNK Indicates
link negotiation.
transmission the resource
PPP
BTS3900, BTS3900 ADD PPPLNK frame error
group,Thiswhether rate
parameter
WCDMA, BTS3900 MOD PPPLNK Indicates
threshold above to
which NO
takes
enable effect
traffic
the only
shaping
dynamic for
LTE LST PPPLNK Indicates
the the PPPis to
BTS3900, BTS3900 ADD PPPLNK
the
for arelated
resource
Indicates
frame transmission
adjustment error the
alarm
of
rate
groups
the RX
index of
generated.
which
resource ENODEBPATH
group. If this
WCDMA, BTS3900 MOD PPPLNK bandwidth
the operator.
threshold of a
This
belowiswhich NO
or GBTSPATH
parameter
transmission
parameter is
is set
resource
used toisto
LTE LST PPPLNK the
added.related alarm
BTS3900, BTS3900 ON,
group. traffic
differentiate
cleared. shaping
between is
ADD RSCGRP If this
this parameter
performed
If parameter according is
is set
set
WCDMA, BTS3900 operators. This NO
LST RSCGRP to
to ON,
the TX
ON, the
thethe TX
bandwidth
RXreserved so
LTE parameter
Indicates is rate
BTS3900, BTS3900 bandwidth
that the
bandwidth
for future transmitis
is
extension adjusted
adjusted traffic
SET RSCGRPALG downsizing
according to packet loss
WCDMA, BTS3900
LST RSCGRPALG
would
according
and
rate doesnot not
threshold to the
exceed the for the
take NO
LTE network
capability
network performance
of
performance
effect currently.
BTS3900, BTS3900 bandwidth
and dynamic adjustment.
SET RSCGRPALG downstream
and
When dynamic
Indicates RXBWASW whether routers, or
WCDMA, BTS3900 bandwidth
thus avoiding
bandwidth
backpressure adjustment
adjustmentis NO
LST RSCGRPALG TXBWASW is set to
LTE parameters
unnecessary
parameters
performed on (down
packet
(down the OM
BTS3900, BTS3900 ON, thePLR
Indicates
speed estimated
the threshold
threshold
SET RSCGRPALG loss
speed
FTP and PLR
queue
available congestion.
threshold
in
transport a If
WCDMA, BTS3900 Indicates
for
and
this delay
down
parameter the
variation
speed minimum
is due
delay
set to NO
LST RSCGRPALG and down
transmission
bandwidth
TX bandwidth speed
is resource
reduced delay
that isif
LTE to
OFF,rate
threshold).
Indicates reduction.
traffic the The
shaping
number
BTS3900, BTS3900 threshold).
group.
the packet
adjustments If this The
loss can rateor
SET RSCGRPALG When
network
not
of RXBWASW
Priority
performed
network
parameter performance
Queues
performance
is set during
to
WCDMA, BTS3900 Indicates
detected
achieve.
TXBWASW
is monitored Ifthe
through
the minimum
set IP
isthrough to NO
LST RSCGRPALG data
(PQs)
is
ENABLE,
RX transmission.
in
monitored
bandwidth a the through
OM that FTP
LTE Performance
RATECFGTYPE
ON,
IP PM the estimated
sessions, which
BTS3900, BTS3900 transmission
IP PM
queue
adjustments
Monitoring
Indicates sessions,
participates
the resource
can
(IPnumberPM) whichthe
is
SET RSCGRPALG (global
available
can
group. be Therate transport
enabled queues at the
the
in
WCDMA, BTS3900 can
higher be
decision
achieve.
threshold enabled
than
configuration of
Ifof the
the this
discarded
type) at and NO
LST RSCGRPALG bandwidth
local
a end
transmission
local end or
or is at
atreduced
the
the peer
peer if
LTE congestion
RATECFGTYPE
threshold.
packets.
TXBWASW This status
If (TXthe packet of
BTS3900, BTS3900 the
end.
end.
the delay
resource
transmission variation
group are
SET RSCGRPALG (global
loss
parameter
detected
If this rate
bandwidth ratedetected
by
parameter indicates
adjustment
anPQs IP is PMset
WCDMA, BTS3900 classified
If this
resource parameter
configuration
through
the capability into
group,
IP abovePM type)
ofisthe is
and and
set
and
lower NO
LST RSCGRPALG switch)
session
to OFF,
non-PQs. parameters
is
the The TX this are
LTE to
the
thanOFF,
OM
RXBWASW this the
low-level RX
threshold, (RX
BTS3900, BTS3900 queue
set to
scheduling
bandwidth
upload
in
and
a
SINGLE_RATE
threshold.The
bandwidth is
is not ofthe
priority
not
downloadUMTS
SET RSCGRPALG bandwidth
estimated
transmission
and adjustment
available
ON,isrespectively,
currently
adjusted. does resource
not
WCDMA, BTS3900 any PQ
adjusted.
data preempts higher thethan NO
LST RSCGRPALG switch)
transport
group
the
The TX
supportUMTS
Indicates to parameters
bandwidth
buffer
bandwidth
this the function.
currently are
is
LTE that
The of
UMTS
bandwidth any ofnon-PQ.
currently
non-real-
BTS3900, BTS3900 set
does to
increased.
packets.
obtained
congestion SINGLE_RATE
not Aafter greater
supporttime each this
There
does
time
and is no
not
services.
ON,
parameter support Priority
respectively,
value If thisthis
WCDMA, BTS3900 None adjustment
Indicates
function.
threshold
Queues the
of
when isa equal
this to NO
function.
parameter
the RX
indicates
or larger bandwidth
a
than is set
strongerthe to
LTE congestion
transmission
parameter clear
value resource time
is FTP
BTS3900, BTS3900 DISABLE,
obtained
capability.
value
threshold of this
ofIfthe
after athis OM
each
SET RSCGRPALG group.
0.The
queue When
queues
does notTCSW is
WCDMA, BTS3900 adjustment
parameter
parameter.
transmission
set to ENABLE, isisset equal
resource tothe0,to NO
LST RSCGRPALG numbered
participate
Indicates
or larger the
than from
theaheartbeat 0if to
decision
the
LTE the
group.queue When in TCSW
BTS3900, BTS3900
buffer
the
of
interval
value
time
result
the of
transmission for after
congestion
this an this is
of non-real-
SCTP
resource
SET RSCGRPALG set
time to ENABLE,
service
parameter value dataifminus the
in a
WCDMA, BTS3900 status
link. The
parameter.
group
buffer of heartbeat
cannot
time the of buffer
non-real- NO
LST RSCGRPALG transmission
1 are
check PQs.
transmission PQ
is independently resource
resource
LTE packets,
time service anddata thus alla
into
BTS3900, BTS3900 group
scheduling
Indicates
group,
initiated exceeds
andby is
whether
the
each used the
OM end
SET RSCGRPALG the delayed
transmission
threshold, it to packets
resource
indicates
WCDMA, BTS3900 between
switch
low-level
of an back PQs.
upload
association A and
the NO
LST RSCGRPALG on
group
that the
smaller
primarythe TX
is belowchannel
transmission
PQ
path number
when theand are
it is
LTE download
then confirmed
discarded. data
The does
by the
BTS3900, BTS3900 threshold,
resource
indicates
restored. a
Theit
group indicates
higher SCTP is the
SET RSCGRPALG not
peer
number
that preempt
end through
threshold
the transmission the of
WCDMA, BTS3900 congested
scheduling
link switches
bandwidth
HB ACK and
of
packet.priority.
to the
the
non-real-When NO
LST RSCGRPALG discarded
resource
backpressure packets
group is
signals not
LTE The
time
no queues
secondary
services.
services path numbered
are The when
BTS3900, BTS3900 ADD SCTPLNK determines
congested
are transmitted. the
and
from
the
carried,
maximum this
primary
bandwidth a parameter
path
amountlow-
of
link OM of
WCDMA, BTS3900 MOD SCTPLNK therefore
value
cannot to be 7 the
are
reached. non- If NO
level
data upload
disconnection
that can
congestion and
clear beis
LTE LST SCTPLNK PQs.
this
download Weight
parameter data Roundis
is set
far to
BTS3900, BTS3900 ADD SCTPLNK determined
buffered
signals arein a if the
Robin
ENABLE,
smaller
number (WPR)
transmission than the
of heartbeat SCTP
that
resource of
WCDMA, BTS3900 MOD SCTPLNK transmitted.
scheduling is used NO
link
any
check
group. switches
otherTheservice.
attempts to
congestion the
LTE LST SCTPLNK between non-PQs.
primary
reaches
time thresholdpath
the when
maximumof a the
primary
retransmissionpath
transmission resource is
restored.
attempts
group determines If this
on an the
parameter
association
amount of data isbut setthe to HB
that is
DISABLE,
ACK
buffered packet when the SCTP
is notthe
link does from
received
transmission not resourceswitch
the peer to
the
end. primary
group is congested. path when
Indicates the number
of heartbeats to be
detected before the
transmission switches
back to the primary
BTS3900, BTS3900 ADD SCTPLNK
path. After the primary
WCDMA, BTS3900 MOD SCTPLNK NO
path is restored,
Indicates the switch the
LTE LST SCTPLNK
transmission
that is used toswitches control
BTS3900, BTS3900 SET TACALG back to the primary
whether to apply UL NO
LTE LST TACALG path when
Indicates thethe number
switch
admission control to a
Indicates
of
thatheartbeats
is used
resource thetoUL
group. detected
control
BTS3900, BTS3900 SET TACALG admission
reaches to thisthreshold
value.
whether apply DL NO
LTE LST TACALG for handed-over
admission control to a
Indicates
services.
resource group. the
A DL value
large
BTS3900, BTS3900 SET TACALG admission threshold
of this parameter will NO
LTE LST TACALG for handed-over
result in a high UL
Indicates
services.
admissionA the UL value
large
success
BTS3900, BTS3900 SET TACALG admission threshold
of
ratethis
of parameter
handed-over will NO
LTE LST TACALG for new
result
services. in Gold-level
a high DL
Indicates
services.
admissionA the DL value
large
success
BTS3900, BTS3900 SET TACALG admission threshold
of
ratethis
of parameter
handed-over will NO
LTE LST TACALG for new
result
services. in Gold-level
a high UL
Indicates
services.
admissionA the UL value
large
success
BTS3900, BTS3900 SET TACALG admission threshold
of
ratethis
of parameter
new Gold-level will NO
LTE LST TACALG for new
result
services. in Silver-level
a high DL
Indicates
services.
admissionA the DL value
large
success
BTS3900, BTS3900 SET TACALG admission threshold
of this parameter
rate of new Gold-level will NO
LTE LST TACALG for new Silver-level
result
services.
Indicates in a high
the UL
switch
Indicates
services.
admission the
A UL value
large
success
BTS3900, BTS3900 SET TACALG that is
admission used to
threshold control
of
ratethis parameter
of new Silver-level will NO
LTE LST TACALG whether
for new to enable
Copper-level the
result
services.
Indicates in a high
the DL
switch
UL pre-emption
Indicates
services.
admission the
A DL
large
success value
BTS3900, BTS3900 SET TACALG that is used
algorithm.
admission to
Ifthreshold
this control
of
ratethis
of parameter
new Silver-level will NO
LTE LST TACALG whether
parameter
for new to isenable
Copper-levelset to the
results
Indicates
services. in a
the highuplink UL
DL
ON, pre-emption
the
services. UL
admissionadmission A pre-
large
success value
BTS3900, BTS3900 SET TACALG transport
algorithm. IfCopper-
this will
emption
of
ratethis algorithm
of parameter
threshold new for the tois NO
LTE LST TACALG parameter
enabled. In is set
this case,
result
level in a
services.
Guaranteed high the DL
Indicates
ON,
the the DL
service
admission the DLaBit
pre-
with
success
BTS3900, BTS3900 SET TACALG Rate
admission
emption (GBR) service.
threshold
algorithm A
LTE LST TACALG higher
rate
large priority
ofvalue
new Copper-
of that is
this
NO
for the
enabled.
requests
level guaranteed
services.In this case,
admission bit
parameter
rate
the (GBR)
service will
service.
withthe result
a Ain
BTS3900, BTS3900 SET TACALG may
a high pre-empt
UL admission
large
higher
resourcesvalue ofofadmitted
priority this
that NO
LTE LST TACALG success rate
parameter
requests
services willof
admission
with lower
GBRin
result
services.
a
canhigh DL
pre-empt admission
BTS3900, BTS3900 SET TACALG priorities whenthe UL
success
resources rate of GBR
of admitted NO
LTE LST TACALG transmission
Indicates
services.
services
bandwidth the
withis switch
lower
BTS3900, BTS3900 SET TACALG that is
priorities
Indicates used when
the
insufficient. If this to control
DL
switch
whether to is enable NO
LTE LST TACALG transmission
that is used
parameter toset toUL
Indicates
overbooking
bandwidth
preferentially the switch
is admission
admit
OFF,
that is the
used UL topre-control
BTS3900, BTS3900 SET TACALG control.
Indicates
insufficient.
emergency
emption It is
the used
If switch
this
calls.
algorithm tois
whether to enable DL NO
LTE LST TACALG determine
that is
parameter
When
disabled. used the
is to
thisInparameterset control
to
this case,is
overbooking
admission
whether
OFF,
set to the
ON, toDL admission
bandwidth
apply
pre- UL
BTS3900, BTS3900 SET TACALG services
control. with
Italgorithm
iscontrolhigher
used to
Indicates
of the resource
admission
emption
transmission
priorities the
that switch
group
request to
is a NO
LTE LST TACALG determine
that
and is used
facilitate
physical
disabled.port. the to
Incontrol
this control
If this
case,
admission cannot is
pre-
admission
whether
admission
parameter
services
not performed to
withbandwidth
isapply
control.
set forto
higher DLof
BTS3900, BTS3900 SET TACALG empt
of the the resources
resource group
admission
ON, UL
priorities
emergency
admitted services to
control
admission
that request
calls andwith a NO
LTE LST TACALG and facilitate
physical port. If this
control
admission
emergency
lower is applied
priorities cannot
calls to
pre-
will
when be
admission
parameter
the
empt physical control.
isport.
the resources
successfully set toIf this
admitted. of
BTS3900, BTS3900 SET TACALG UL transmission
Indicates the switch for
ON, DLthis
parameter
admitted
When
bandwidth admission
is
services set
parameter
is to with is NO
LTE LST TACALG the DL OLC algorithm.
control
OFF,
lower
set to UL is admission
applied
priorities
OFF
insufficient. and when
the to
If
thethis parameter
physical isIf set
BTS3900, BTS3900 SET TACALG control
DL
transmission
to ON, is notport.
transmission
bandwidth applied of
this
parameter
to the
bandwidth physical is
is set to
port. NO
LTE LST TACALG admission
the services algorithm
Indicates
OFF, DL
insufficient.
switch is theofthreshold
admission
turned
a low
on,to
priority
for is
triggering
control released
is not the applied UL
BTS3900, BTS3900 SET TOLCALG transmission
guarantee
OLC.
to the When
physical the the QoSUL
port. of NO
LTE LST TOLCALG admission control is
the services
bandwidth of a high
occupancy
performed
priority when fortransport
BTS3900, BTS3900 SET TOLCALG reaches
emergency thecalls.
threshold,
bandwidth changes or NO
LTE LST TOLCALG low-priority
When thisoccurs services
parameter is
overload
are removed to the to
due
set to
increased OFF and
load of non-
guarantee
transmission the quality
flow
of control services.
high-priority
admission algorithm
services.
switch is turned off,
transmission
admission control is
not performed for
Indicates the threshold
for clearing the UL
OLC. When the UL
BTS3900, BTS3900 SET TOLCALG
bandwidth occupancy NO
LTE LST TOLCALG
is below this
Indicates
Indicates the threshold,
the threshold
number
BTS3900, BTS3900 SET TOLCALG user
for services
triggering
of released services areDL
the no
longer
OLC. removed.
When the DL NO
LTE LST TOLCALG during an OLC action
Indicates
period. the
bandwidth traffic
occupancy
BTS3900, BTS3900 SET TOLCALG type.
reaches Traffic
the of different
threshold,
Indicates the threshold
types is transmitted NO
LTE LST TOLCALG low-priority
Indicates
for clearing services
thethe VLANDL
through
are
group
OLC. removed different
that
When thethetoadded
DL
BTS3900, BTS3900 SET TOLCALG VLANs.
guarantee
VLAN High-priority
mapping the quality
bandwidth occupancy NO
LTE LST TOLCALG OM
of datato.
high-priority
belongs includes
Multiple the
ADD VLANCLASS is below this threshold,
BTS3900, BTS3900 data
VLAN of
services. NTP/SNTP,
groups
user services are no are used
LST VLANCLASS remote maintenance
WCDMA, BTS3900 in the scenario
longer removed. in YES
MOD VLANCLASS channel switchover,
LTE ADD VLANCLASS which telecom
BTS3900, BTS3900 RMV VLANCLASS and TCP (excluding
MOD VLANCLASS operators share
WCDMA, BTS3900 that related
transport to FTP).
resources YES
RMV VLANCLASS
LTE ADD VLANCLASS Low-priority
and use OM data
different
BTS3900, BTS3900 LST VLANCLASS
MOD VLANCLASS includes
VLAN policies.
Indicates the
thedata DSCP of
WCDMA, BTS3900 the File Transfer YES
RMV VLANCLASS priority of user data.
LTE Protocol (FTP) service.
BTS3900, BTS3900 LST VLANCLASS
ADD VLANCLASS Indicates
Other datathe VLAN
refers to ID
WCDMA, BTS3900 MOD VLANCLASS that
the the service
data except data
the NO
LTE LST VLANCLASS Indicates
belongs to.the VLAN
BTS3900, BTS3900 ADD VLANCLASS user data,
priority. signaling,
A greater
WCDMA, BTS3900 MOD VLANCLASS high-priority
parameter value OM data, NO
LTE LST VLANCLASS and low-priority
denotes athe higher OM
Indicates
data. cabinet
BTS3900, BTS3900 priority.
MOD RETSUBUNIT number of the RRU or
WCDMA, BTS3900 NO
LST RETSUBUNIT RFU that is connected
LTE Indicates
BTS3900, BTS3900 to antennathe port subrack
1.
MOD RETSUBUNIT number of the RRU or
WCDMA, BTS3900 NO
LST RETSUBUNIT RFU that is connected
LTE Indicates
BTS3900, BTS3900 to antennathe port slot1.
MOD RETSUBUNIT number of the RRU or
WCDMA, BTS3900 NO
LST RETSUBUNIT RFU that is connected
LTE Indicates
BTS3900, BTS3900 to antennathe port port1.
MOD RETSUBUNIT number
Indicatesofthe thecabinet
RRU or
WCDMA, BTS3900 NO
LST RETSUBUNIT RFU
number thatofisthe connected
RRU or
LTE
BTS3900, BTS3900 to antenna port
RFU that is connected 1.
MOD RETSUBUNIT Indicates the subrack
WCDMA, BTS3900 to antenna port 2. This NO
LST RETSUBUNIT number of the RRU or
LTE parameter is valid
BTS3900, BTS3900 RFU
when that
a is connected
dual-polarized
MOD RETSUBUNIT Indicates
WCDMA, BTS3900
LST RETSUBUNIT
to antenna
antenna isthe port
used. slot2. This NO
LTE number
parameter of theis validRRU or
BTS3900, BTS3900 RFU
when that
Indicatesa is connected
dual-polarized
the allowed
MOD RETSUBUNIT Indicates
Indicates the
WCDMA, BTS3900
LST RETSUBUNIT
to antenna
antenna
compensation
maximum isthe port
used. port2. This NO
LTE number
parameter of tilt
RRU
is validor
BTS3900, BTS3900 mechanism
inconsistency.
RFU that forWhen
the
is connected
MOD RETSUBUNIT when a
transmission dual-polarized
delay
WCDMA, BTS3900 the
to difference
antenna
antenna
Indicates is port
used.
the between
2. This
priority NO
LST RETSUBUNIT between
the actual thetilt clock
of an
LTE parameter
configured is
by valid
the user
BTS3900, BTS3900 server
RET
when aand
subunit the and
dual-polarized base
MOD RETSUBUNIT for the
station. BMC
The (Best
WCDMA, BTS3900 configured
antennaClock)
Indicates
Master isthe tiltE2E
used. mode
is larger
priority NO
LST RETSUBUNIT uses the Delay-
LTE than the
configured
algorithm. value by thethis
The of user
BTS3900, BTS3900 Indicates
Request-Response
parameter, whether
ALM- the
ADD IPCLKLINK for the
information
BMC BMC
(Best (Best the
about
Master
WCDMA, BTS3900 mechanism
26757
Master RET
Clock) to
Antenna NO
LST IPCLKLINK priority
Clock) can
algorithm be is
LTE measure
Running
algorithm. the
DataThe average
and
BTS3900, BTS3900 collected
enabled
delay or
betweenfromnot. the
ON
thethe
SET CLASSIDENTIFY Configuration
information
upper-level about
clock
WCDMA, BTS3900 indicates
primary
Mismatch andthat
is the BMC
secondary
reported. NO
DSP PRICLASS priority
equipment. canis be This
LTE algorithm
devices. The enabled,
P2P
BTS3900, BTS3900 SET PRICLASS collected
parameter
and OFF from the that
specifies
indicates
mode uses
upper-level the
clock Peer-
WCDMA, BTS3900 DSP PRICLASS the
the
Delayclock
BMC quality that
algorithm
mechanism tois is NO
LTE LST PRICLASS equipment.
anticipated
disabled. This
by the
BTS3900, BTS3900 SET PRICLASS measure
parameter the average
specifies
user.
delay The
between upper-level
WCDMA, BTS3900 DSP PRICLASS the
clockclock qualitytwo
equipment that
with is NO
LTE LST PRICLASS devices.
anticipated byclock
the
the matching
user.
qualityThe upper-level
is selected as
clock
the target server.with
equipment
the matching
Class0 has the clock
highest
quality
priority,isand selected
Class0asto
the target
Class3 server.
indicate
Class0 has the highest
priorities in descending
Master Clock)
configured
algorithm. The by the user
for the
information about BMC (Best the
Master
priority can Clock) be
algorithm.
collected from The the
information
upper-level about clock the
priority
equipment. This can be
BTS3900, BTS3900 SET PRICLASS collected
parameterfrom specifiesthe
WCDMA, BTS3900 DSP PRICLASS upper-level
the clock quality clockthat is NO
LTE LST PRICLASS equipment.
anticipated by This the
BTS3900, BTS3900 SET PRICLASS parameter
user. The upper-level specifies
WCDMA, BTS3900 DSP PRICLASS the
clock clock quality that
equipment with is NO
LTE LST PRICLASS anticipated
the matching clock by the
BTS3900, BTS3900 Indicates
user.
quality The whether
upper-level
is selected the
as
ADD IPCLKLINK Indicates the MAC
WCDMA, BTS3900 clock
clock
the source
equipment
target server.is with NO
LST IPCLKLINK address of theclock clock
LTE specified.
the
Class0 matching
hasthe theIPhighest
BTS3900, BTS3900 ADD IPCLKLINK source
quality for
isand selected clock
WCDMA, BTS3900 DSP IPCLKLINK priority,
server. The Class0asto
MAC NO
the
Class3 target server.
indicate
LTE LST IPCLKLINK address
Indicates
Class0 must
has the the behighest
in the
BTS3900, BTS3900 priorities
Indicates
format of in
the descending
priority
XXXX-XXXX- of
ADD IPCLKLINK compensation
priority,
order.
the clock and Class0
source. for The to
WCDMA, BTS3900 XXXX. NO
LST IPCLKLINK asymmetry
Class3
value 1 indicate indicatesof IP clock that
LTE
BTS3900, BTS3900 links.
priorities
the current in descending
clock
ADD IPCLKLINK Indicates
order.
Indicates the
the priorityofof
offset
WCDMA, BTS3900 source
the IP
RSRP has
clock the
threshold
server. highest NO
LST IPCLKLINK frequency atthe which the
LTE priority,
The
for LTEvalue and
FDD 0 indicate
inter- value
BTS3900, BTS3900 clock
4 source
indicates thatsends the
ADD IPCLKLINK the
frequency
Indicates highest thepriority,
WCDMA, BTS3900 announcement
current NO
LTE
LST IPCLKLINK and
measurement
frequency
packets the clock
value
based
source
at which 255
event
on itsthe
has
indicates
A2 the
relative lowest
the to priority.
lowest
the
BTS3900, BTS3900 clock
negotiation sourcewith sends the
ADD IPCLKLINK priority.If
RSRP
WCDMA, BTS3900
LST IPCLKLINK BS. threshold
synchronization two IP clock for NO
LTE servers
inter-frequency
packets are
Indicates the offsetitsof
based required,
on
BTS3900, BTS3900 Indicates
the
measurement value thewith interval
ADD IPCLKLINK negotiation
the RSRPofthreshold this event
the
WCDMA, BTS3900 at
parameter
A2 which
(which
BS.UTRAN inter-RAT negotiations
is
is specified
used to NO
LST IPCLKLINK for
LTE are
identify
by
Indicates performed
the active and
handover event A2 of the offset
BTS3900, BTS3900 between
standby
InterFreqHoA2ThdRsr
the RSRP IPthe BS and IP
clock
threshold
ADD IPCLKLINK relative to the RSRP
WCDMA, BTS3900 clock
servers.
p).
for If
GERANserver.
The After
IP clockthe NO
LST IPCLKLINK threshold forinter-RAT
inter-RAT
LTE interval
server withevent
TddIfHoA2ThdRsrpOff
handover elapses, a higher the
A2
BTS3900, BTS3900 handover
Indicates event
the pre-hopA2
ADD IPCLKLINK BS
priority
set
relative initiates
and serves another
tospecified
the as the
RSRP
WCDMA, BTS3900 ADD (which
IPv4 is
address of the by
antheIP NO
LST IPCLKLINK negotiation
active
FddIfHoA2ThdRsrpOff
threshold server forwith and
inter-RAT IP
LTE CNOPERATOREXTE InterRatHoA2ThdRsrp)
Indicates
clock. the
clock
IP
set
handover clock
are server.
set
server to
event the with
A2same a
BTS3900, BTS3900 NDEDQCI .frequency
If the value at of which
ADD IPCLKLINK lower
value
(which priority
(excluding
isRequest
UtranA2ThdRsrpOffset specifiedserves thebyas
WCDMA, BTS3900 ADD
LST PDelay NO
LST IPCLKLINK the
value standby
-100),
InterRatHoA2ThdRsrp)
and that of server.
LTE TDD
LTE CNOPERATOREXTE
CNOPERATOREXTE packets are sent on an
measurement
.GeranA2ThdRsrpOffse
IPIf clockthe value link. ofand LTE
BTS3900, BTS3900 NDEDQCI
NDEDQCI Indicates
FDD the index of
measurement are
LST UtranA2ThdRsrpOffset
tIndicates
areoperator.
identicalthe extended YES
LTE MOD the
not
and prioritized,
that of and the
CNOPERATOREXTE
CNOPERATOREXTE (excluding
QoS Class the value -
Identifier
ADD RSRP threshold
GeranA2ThdRsrpOffse
100), UTRAN
BTS3900, BTS3900 NDEDQCI
NDEDQCI
CNOPERATOREXTE (QCI),
delivered which by the is
tmeasurement
are identical YES
LTE MOD
RMV
NDEDQCI required
eNodeB bythe
is theand sum of-
CNOPERATOREXTE (excluding
GERAN
Indicates
operator measurement
the
for IDvalue
user of the
ADD
CNOPERATOREXTE
MOD the
100), value
UTRAN of
BTS3900, BTS3900 NDEDQCI
CNOPERATOREXTE
NDEDQCI are not prioritized,
service-based
differentiation. inter-and
TddIfHoA2ThdRsrpOff
measurement and NO
LTE RMV
NDEDQCI the
RATRSRP handover threshold policy
NDEDQCI set
GERAN
Indicates
deliveredor measurement
the
by the ID of the
CNOPERATOREXTE
MOD group.
BTS3900, BTS3900 LST FddIfHoA2ThdRsrpOff
are not prioritized,
service-based
eNodeB is the inter- sumand of
NDEDQCI
CNOPERATOREXTE
CNOPERATOREXTE
MOD set and NO
LTE
NDEDQCI
the
frequency
the valuethe
RSRP RSRP
threshold
ofhandover
this
NDEDQCI
CNOPERATORHOCF threshold
delivered
policy group.
parameter for
by and inter-
the the
BTS3900, BTS3900 LST
G frequency
eNodeB is the sum
CNOPERATOREXTE RSRP threshold for of NO
LTE MOD
LST measurement
the value of this event
NDEDQCI inter-RAT
CNOPERATORHOCF
CNOPERATORHOCF A2.
parameter If both andevent the
measurement
BTS3900, BTS3900 G
G TddIfHoA2ThdRsrpOff
RSRP threshold for
MOD A2. If both NO
LTE LST set
inter-RATand
CNOPERATORHOCF UtranA2ThdRsrpOffset
CNOPERATORHOCF FddIfHoA2ThdRsrpOff
measurement event
BTS3900, BTS3900 G and
G set
Indicates
A2. are
If set
both the to -100,
medium- NO
LTE LST
LST GeranA2ThdRsrpOffse
Indicates thefor highest-
CSFALLBACKBLINDH LTE are TDD
priority setRAT
UtranA2ThdRsrpOffset
tpriority to -100,
CNOPERATORHOCF measurement
handovers. RAT Itforisand LTE
BTS3900, BTS3900 OCFG and
UTRAN
IndicatesmeasurementtheIt index of
G handovers.
FDD
GERAN measurement
by is
default. are
If YES
LTE MOD
MOD GeranA2ThdRsrpOffse
and
the GERAN
operator.
UTRAN
tnot
this by
prioritized,
parameter default.and
is setIf
the
CSFALLBACKBLINDH
CSFALLBACKBLINDH are set
measurement
this parameter
to -100, are
is setnotto to
BTS3900, BTS3900 OCFG
OCFG RSRP
UTRAN,
UTRAN
prioritized,threshold
GERAN,
measurement
and theor or
MOD UTRAN,
delivered
CDMA2000,
and GERAN GERAN,
by the NO
LTE LST RSRP threshold
CSFALLBACKBLINDH CDMA2000,
eNodeB
medium-priority
measurement isbythe the RSRP
areRAT notis
CSFALLBACKBLINDH delivered the
BTS3900, BTS3900 OCFG highest-priority
threshold
UTRAN,
prioritized, for
GERAN,
and inter-RAT
the or is
OCFG eNodeB is the RSRP NO
LTE LST UTRAN,
frequency
CDMA2000,
RSRP GERAN,
threshold or
threshold
CDMA2000, for inter-RAT
CSFALLBACKBLINDH measurement
respectively.
delivered
measurement by the Ifevent
this
event
OCFG respectively.
A2.
parameter
eNodeB is istheset RSRP to
A2. If only
If only no for
NULL,
threshold
UtranA2ThdRsrpOffsetmedium-inter-RAT
FddIfHoA2ThdRsrpOff
priority
is set toRAT
measurement -100,isUTRAN event
set
A2. is
specified
If set
only
measurement is not to
and -100,
only LTE
the
FDD
performed and the is
measurement
highest-priority
GeranA2ThdRsrpOffse RAT
not
can
tRSRP performed -100,and
be threshold
is set selected
to forthe
priority RAT for
handovers. It is
CDMA2000 by default.
If this parameter is set
to UTRAN, GERAN, or
CDMA2000, the
MOD
lowest-priority RAT is
CSFALLBACKBLINDH Indicates the LCS or
UTRAN, GERAN,
BTS3900, BTS3900 OCFG capability of the
MOD CDMA2000, NO
LTE LST UTRAN. If this
CSFALLBACKBLINDH respectively. If this
CSFALLBACKBLINDH Indicates
BTS3900, BTS3900 OCFG parameterthe
parameter is
is setLCSto
set to
OCFG capability
ON, the of
UTRAN the NO
LTE MOD
LST NULL, no lowest-
GERAN.
supports
priority RAT If this
LCS. isLCS If this
CSFALLBACKBLINDH Indicates the medium-
parameter
parameter
specified andis
is set
set
only to
tothe
BTS3900, BTS3900 OCFG
OCFG capability of the
MOD priority
ON,
OFF, the
Indicates
highest- RAT
theor GERAN
the
UTRAN for CSFB
highest-
medium- does NO
LTE LST CDMA2000.
initiated by IfUE
aLCS. this in idle
CSFALLBACKBLINDH supports
priority
not support
Indicates
priority RAT
RAT LCS.
the for
can IfCSFB
lowest- this
be
CSFALLBACKBLINDH parameter
mode. ItRAT
is is
GERANset to by
BTS3900, BTS3900 OCFG parameter
initiated
priority
selected byforisaforset
UECSFB to
in idle
OCFG ON, the
default. CDMA2000
If this NO
LTE MOD
LST OFF,
mode.
initiated
handovers.theIt by GERAN
is UTRAN
a UE in by does
idle
CSFALLBACKBLINDH supports
parameter
not support
default.
mode. ItIfisLCS.
is
this set
LCS.
CDMA2000 If tothis
CSFALLBACKBLINDH
BTS3900, BTS3900 OCFG parameter
UTRAN,
parameter
by default. is
GERAN,
is set to
set
If this toor
OCFG NO
LTE MOD
LST OFF,
CDMA2000,
UTRAN, the CDMA2000
parameter is set toor
GERAN, the
CSFALLBACKBLINDH
CSFALLBACKBLINDH does not GERAN,
medium-priority
CDMA2000,
UTRAN, supportthe RAT LCS.
or is
BTS3900, BTS3900 OCFG
OCFG UTRAN,
highest-priority
CDMA2000, GERAN, theRAT or is
MOD NO
LTE LST CDMA2000,
UTRAN,
lowest-priority GERAN, RAToris
CSFALLBACKBLINDH
CSFALLBACKBLINDH Indicates
respectively. the IfCSFB thisor
CDMA2000,
UTRAN,
policy GERAN,
for aisUE into
BTS3900, BTS3900 OCFG
OCFG parameter
respectively. set
MOD CDMA2000,
connected mode. If the NO
LTE LST NULL, no medium-
CSFALLBACKPOLICY respectively.
CSFB steering If this
CSFALLBACKBLINDH priority RATisisset to
BTS3900, BTS3900 CFG parameter
function is disabled,
OCFG specified
LTE MOD
LST NULL,
this noand
parameter lowest- only the
also
NO
Indicates
highest-priority
priority RAT the CSFB
is in RAT
CSFALLBACKPOLICY
CSFALLBACKPOLICY
ADD applies to UEs idle
policy
can be
specified for a
selected
and UE in
only foridle
the
BTS3900, BTS3900 CFG Indicates whether
LTE
CFG
SERVICEIFHOCFGG
LST
mode.
Indicates
mode.
CSFB
highest-
The
The the
initiated
or
policy
policy
medium- by atoUE
can
can NO
ROUP use
be PSnormal
frequency handover, or
to which specialCCO,
CSFALLBACKPOLICY
be
in PS mode.
idle
Indicates
priority
DRX.
or
handover,
If RAT
this
redirection. whether
can
parameter be toa
CCO,
MOD service
or with
redirection.
allow a specified
BTS3900, BTS3900 CFG
SERVICEIFHOCFGG is
QCI setisSPID-based
selected
Indicates for CSFBto
whether
topreferentially
TRUE, NO
LTE handovers
initiated
support
ordinary by back
a UE to
preallocation.
DRX in theidle
ROUP handed
home over land
public during a
ADD
LST SPIDCFG mode.
If this
parametersparameter
service-based are inter-is set
BTS3900, BTS3900 mobile
to TRUE network
MOD SPIDCFG
SERVICEIFHOCFGG applied
frequency toand UEs
handover. with the NO
LTE (HPLMN).
PreAllocationSwitch If this
LST
ROUPSPIDCFG SPID. If this parameter
ADD SPIDCFG parameter
under
Indicates
is set to the is set
UlSchSwitch
the
FALSE, length to of
BTS3900, BTS3900 TRUE(TRUE), a
MOD SPIDCFG parameter
the counter
special
Indicates DRX in the
check
thecan COUNT NO
LTE roaming UE be is
LST SPIDCFG CellAlgoSwitch
timer.
parameters
value When
for theMO
are
initiating timer
ADD SPIDCFG handed
set to On,
expires,
applied over
to to
resources
a counter
UEs with thethe
BTS3900, BTS3900 counter check
MOD
MOD SPIDCFG HPLMN
can
check
SPID. be network when
preallocated
procedure is to NO
LTE procedures. When
LST SPIDCFG
COUNTERCHECKPA it moves
UEs. back
Otherwise,
initiated. After to
the thethe
COUNT
coverage value
of (used at
BTS3900, BTS3900 RA resources
procedure
the PDCP isthe
are notof any
complete,
layer)
MOD HPLMN
preallocated network toisUEs. based NO
LTE LST the
DRB timer
forSPID.aisUE restarted. a
COUNTERCHECKPA
COUNTERCHECKPA on
A the
length of of the If this
0 indicates
multiple
parameter is set valueto of
BTS3900, BTS3900 RA
RA that the timer is the
invalid.
MOD this parameter,
FALSE(FALSE), NO
LTE LST In this case,
Indicates
eNodeB the this
whether
initiates ato
COUNTERCHECKPA UE cannot
COUNTERCHECKPA eNodeB
release
counter DRBhanded
cannot
acheck be initiate
when
BTS3900, BTS3900 RA
RA over to the
Indicates
periodic the HPLMN
counter highest-
check
the counter
procedure. check
The value NO
LTE LST network
priority
procedures. based
ciphering on the
MOD detects
0 an
indicates that the unexpected
COUNTERCHECKPA SPID.
algorithm supported
BTS3900, BTS3900 ENODEBCIPHERCAP
RA
result
eNodeB
Indicates
in thedoes DRB.
the The not by
second-
the eNodeB.
initiate aciphering
counter check value NO
LTE LST priorityindicates
MOD NULL
procedure based on by that
ENODEBCIPHERCAP algorithm supported
BTS3900, BTS3900 ENODEBCIPHERCAP ciphering
the COUNT is not
Indicates
the eNodeB.
applied. thevalue.third-value
The NO
LTE LST priority cipheringthat
MOD NULL indicates
ENODEBCIPHERCAP algorithm supported by
BTS3900, BTS3900 ENODEBCIPHERCAP ciphering is not
Indicates
the eNodeB.
applied. the fourth-
The value NO
LTE LST priority cipheringthat
MOD NULL indicates
ENODEBCIPHERCAP algorithm supported by
BTS3900, BTS3900 ENODEBCIPHERCAP ciphering is not
MOD the eNodeB.
applied.
Indicates the timer The value NO
LTE LST
ENODEBCONNSTAT NULL
governing indicatesthe period that
ENODEBCIPHERCAP
BTS3900, BTS3900 ETIMER ciphering
the eNodeB is notwill wait
MOD applied.
Indicates the timer NO
LTE LST for a response
ENODEBCONNSTAT
ENODEBCONNSTAT governing
message from the periodthe
BTS3900, BTS3900 ETIMER
ETIMER the
MME. eNodeB will wait
NO
LTE LST for a response
ENODEBCONNSTAT message from the
ETIMER neighboring eNodeB.
MOD
Indicates the timer
ENODEBCONNSTAT
governing the period
BTS3900, BTS3900 ETIMER
MOD the eNodeB will wait NO
LTE LST
ENODEBCONNSTAT for a response
Indicates the timer for
ENODEBCONNSTAT
BTS3900, BTS3900 ETIMER message
the eNodeB from to await UE.for
ETIMER NO
LTE MOD
LST a RRC Connection
ENODEBCONNSTAT Indicates
Setup Complete. the timer for
BTS3900, BTS3900 ETIMER
ETIMER the eNodeB to wait for
MOD NO
LTE LST a Securitythe
Indicates Mode timer for
ENODEBCONNSTAT
ENODEBCONNSTAT Complete message.
the eNodeB to wait for
BTS3900, BTS3900 ETIMER
ETIMER
MOD an unprotected UE NO
LTE LST
ENODEBCONNSTAT Capability
Indicates the Information
timer for
ENODEBCONNSTAT
BTS3900, BTS3900 ETIMER message.
the eNodeB to wait for
ETIMER NO
LTE MOD
LST the first forwarded
ENODEBCONNSTAT
ENODEBCONNSTAT packet.
Indicates the timer for
BTS3900, BTS3900 ETIMER
ETIMER
MOD the eNodeB to wait for NO
LTE LST Indicates the highest-
ENODEBINTEGRITYC the endmarker packet.
ENODEBCONNSTAT priority integrity
BTS3900, BTS3900 AP
ETIMER Indicates whether the
MOD protection
eNodeB can algorithm
use the NO
LTE LST Indicates the
ENODEBINTEGRITYC supported
Indicates
null algorithm the by second-
the
length
for of
ENODEBINTEGRITYC Indicates the length
BTS3900, BTS3900 AP
AP
priority
eNodeB.
timer
integrity T320integrity for
protection. load Ifof
MOD timer
protection
balancing.T302.algorithm T320 NO
LTE LST this switch
Indicates
T302 specifies the is turned
third-
the
ENODEBINTEGRITYC supported
specifies the by the
time
ENODEBINTEGRITYC off, the
priority
time duringnull
integrity algorithm
which a UE
BTS3900, BTS3900 AP eNodeB.
period during which
AP cannot
protection
whose be algorithm
RRC used for NO
LTE MOD
LST the dedicated priorities
integrity
supported
connection protection.
by the is
request
ENODEBINTEGRITYC
ENODEBINTEGRITYC (used for cell
When
eNodeB.
rejected this has switchto wait is
BTS3900, BTS3900 AP
AP Indicates
reselection) the length
retain of
MOD turned
before off,
the time the
UE eNodeB
can NO
LTE LST timer
valid. T320
The to be period
RRCCONNSTATETIM selects
initiate aanrequest integrity
ENODEBINTEGRITYC contained
is contained in in the
BTS3900, BTS3900 ER protection
again.
Indicates algorithm
the length of
AP RRCConnectionRelea NO
LTE MOD
LST based
This
timer on the
timer
T304 isfor algorithm
started
intra-
se messages
message
priorities specified sent
that isbyfor
RRCCONNSTATETIM
RRCCONNSTATETIM when
RAT
reasons the
handover. UE
other receives
thanIfUE.theof
received
Indicates by
the
PrimaryIntegrityAlgo, the length
BTS3900, BTS3900 ER
ER an
UE does not
LTE MOD
LST
load
After
timer balancing.
T320
T304
SecondIntegrityAlgo, forcomplete
expires, T320
inter- the NO
RRCConnectionReject
the handover
specifies
dedicated
RAT handover the before
time
priorities to
RRCCONNSTATETIM
RRCCONNSTATETIM and
messageThirdIntegrityAlgo,
and stopped
this
period
become
GERAN. timer
Indicates during expires,
invalid.
Ifthe
the thenull UE the
which
length of
BTS3900, BTS3900 ER
ER but
when skipsthe UE enters
MOD UE
the
This
does
the reverts
dedicated
UE timer
not isback
complete
inactivity started to
priorities
timer the
the
timer. NO
LTE LST algorithm.
the
RRCCONNSTATETIM associated
(used
when
handover
for
If DRX
the forUEs
the
eNodeB cell
UE
before receives
when
detects this
RRCCONNSTATETIM RRC_CONNECTED
BTS3900, BTS3900 ER configuration
reselection)
an
Indicates
timer
dynamic
that expires,
a or the
DRX
UEperforms are and
timer
has neitherthe
is valid.
UE
ER mode cell NO
LTE MOD
LST initiates
After
reverts
enabled.
received T320 an
RRCConnectionRelea
used to back
govern
nor RRC
If expires,
the to
sent thedata
eNodeB the
RRCCONNSTATETIM
RRCCONNSTATETIM reselection.
connection
dedicated
se message
period
associated inthat priorities
which containing
thehas
detects
for a duration a UE
BTS3900, BTS3900 ER
ER reestablishment
become
the t320received
eNodeB
configuration
neither invalid.
IE.theand
maintains This
nor of
exceeding
Indicates the value
timer NO
LTE MOD
LST procedure.
parameter
This
uplink timer
initiates
sent data an is
is
synchronization
for RRC invalid
stopped
a for
this
used parameter,
tobe govern the
the
RRCCONNSTATETIM
RRCCONNSTATETIM UEs
when
for a to the
UE.
connection
duration UE
Afterredirected
re-
exceeding enters
this the
eNodeB
period in releases
which thethe
BTS3900, BTS3900 ER
ER based ofonthis
the connection
timer expires,
establishment
value the the
MOD RRC
eNodeB maintains for NO
LTE LST Indicates
subscriber
RRC_CONNECTED
eNodeB
procedure. the
does length
profile not ID
send of
RRCCONNSTATETIM parameter,
the UE.
uplink If thisthe
synchronization
RRCCONNSTATETIM the timer
(SPID).
mode.
Timing
eNodeB for
Advance the
BTS3900, BTS3900 ER
ER
parameter
for
eNodeB
This DRXreleases
a timer tois
is set
UE filter when
started
tothe 0,
MOD Command
RRC
the UE
dynamic connection
inactivity to the UE.
for
timer NO
LTE LST
RRCCONNSTATETIM
repeated
when
This
the UE.
is not theADRX
parameter
used. RRC
UElarge
is
If receives
this does
value
RRCCONNSTATETIM enabled.
Connection
an After Request this
BTS3900, BTS3900 ER not
of take
this
parameter
timer effect
parameter
expires, is theit is
if
modified,
ER messages.
RRCConnectionRelea The NO
LTE MOD
LST set
the to
reduces 0.
modified
eNodeB That
the is,
notthe
amount
value
doescontaining send of
RRCCONNSTATETIM actually
se message
eNodeB
signaling
applies used
will
onlybut to timer
constantly
increase
UEs
RRCCONNSTATETIM Timing
BTS3900, BTS3900 ER length
the
send
UE t320
thatpower isAdvance
Timing
access thethe
IE. Itsumis of
Advance
ER Command toand the UE. NO
LTE MOD
LST T300
stopped
Command length
consumption.You
network when
later. to the thethe UE UEto
are
You
value are
entersofthe advised
this to set
RRCCONNSTATETIM
RRCCONNSTATETIM maintain
advised to uplinkset this
this parameter
parameter.
RRC_CONNECTED to a
BTS3900, BTS3900 ER
ER synchronization
parameter to athan forthe
value the
value
mode. smaller NO
LTE LST UE.
greater than the value
ADD TCEIPMAPPING value of
RRCCONNSTATETIM of
BTS3900, BTS3900 LST UeInactivityTimerDynD
ER TCEIPMAPPING Indicates
UlSynTimerDynDrx.In the ID of the
YES
LTE MOD TCEIPMAPPING rx.In
TCE power
Indicatesfor MDT.thesaving IP
power
mode, saving
address you version.aremode, advised
RMV TCEIPMAPPING
ADD TCEIPMAPPING you are advised to set
BTS3900, BTS3900 to set
IPv4~0 this parameter
indicates that
MOD TCEIPMAPPING this parameter
significantly different NO
LTE the IP version is IPv4.to
LST TCEIPMAPPING significantly
the value of different
the that to
IPv6~1 indicates
the
the value
UeInactivityTimerDynD
IP version of theis IPv6.
UlSynTimerDynDrx
rx parameter, for
parameter,
example a gap for of 10
example
seconds, to avoid a gap of 10
seconds,
power consumption to avoid
power
increase consumption
due to the
ADD TCEIPMAPPING
BTS3900, BTS3900 Indicates the IPv4
MOD TCEIPMAPPING NO
LTE address of the TCE.
LST TCEIPMAPPING Indicates the
ADD TCEIPMAPPING Reference Signal
BTS3900, BTS3900 Indicates the IPv6
MOD TCEIPMAPPING Received Power NO
LTE address ofthe
Indicates thethreshold
TCE.
LST TCEIPMAPPING Indicates
(RSRP) the
threshold
for UEs to exit the for
BTS3900, BTS3900 MOD CAMGTCFG Reference
reporting eventSignal A2 in a
discontinuous NO
LTE LST CAMGTCFG Received
secondary
Indicates Power
the cell. threshold
When
reception (DRX) mode
(RSRP)
the
for threshold for
is a
in aUEs
RSRP
cell to that of operates
enter a UE the
BTS3900, BTS3900 MOD CAMGTCFG UE
lower to than
report
discontinuous
Indicates the this event
threshold A4
in FDD mode. This NO
LTE LST CAMGTCFG of aasecondary
threshold,
reception cell.
threshold is used in is
for CA UE(DRX)
event to A2
mode
activate
When
reported.
in
an aSCell.
cell the thatARSRP CA operates
UE of can
the
BTS3900, BTS3900 MOD CAMGTCFG the DRX
Indicates algorithm.
the threshold It is
UE
in is
FDD
active greater
mode.
anUE SCell than
This the
LTE LST CAMGTCFG expressed
for a CA astoa only NO
threshold,
threshold
when its buffered iseventused A4in
data is
proportion
deactivate of
an the
SCell. A
reported.
the
on DRX
the algorithm.
eNodeB It is
BTS3900, BTS3900 MOD CAMGTCFG transmission
CA UE
Indicates can the time
deactivate
threshold
expressed
exceeds
intervals this
(TTIs)as a
threshold.
with its NO
LTE LST CAMGTCFG an
for SCell
a CA UE onlytowhen activate
proportion
data
buffered transmission
data of the on tocan
the
an SCell. the
transmission
Indicates A CA time UE
threshold
BTS3900, BTS3900 MOD CAMGTCFG the
eNodeBtotal TTIs.
is smaller If the
activate
intervals
for CA an
a this (TTIs)
UE SCell
toresultwith only NO
LTE LST CAMGTCFG measurement
than threshold. of
when
data
deactivate
Indicates its buffer
transmission
the an delay
offsettofor
SCell. A
UE
on traffic
the eNodeB is higher
BTS3900, BTS3900 MOD CAMGTCFG the
CA total
UE
reporting
than canTTIs.
this this the If
deactivate
DL
threshold, the the
CoMP
exceeds NO
LTE LST CAMGTCFG measurement
an onlythreshold.
SCell determines
measurement
eNodeB result
when
event.its of
LST Indicates
UE traffic
throughput
This
that offset
the UE the
isis isequallocal
smaller
the
should to or
BTS3900, BTS3900 CELLDLCOMPALGO identity
lower
than than
the
difference
remain ofvalue
in the
the cell.
thisnon-DRX
between of this Itthe
YES
LTE MOD uniquely
threshold,
parameter.
Indicates
signal or
mode identifies
quality thethe
the UE eNodeB
uplink
of ashould a
MOD
CELLDLCOMPALGO cell within anthat
BTS3900, BTS3900 CELLDLCOMPALGO
determines
traffic
neighboringvolume
be triggered toeNodeB.
cell the
andthe
exit UE
should
threshold
that of remain
the
DRX mode. If the forserving UEs in DRX
to
cell. NO
LTE LST Indicates
mode
enter or value
DRX the
the inUE uplink
theshouldcell
A larger
value of the
CELLDLCOMPALGO traffic
be volume
triggered to
BTS3900, BTS3900 MOD CELLDRXPARA that operates
indicates
FddExitDrxThd that in aenter
TDD
threshold
DRX
mode. mode.
neighboring
parameter This for UEs
Ifcellboth
isthreshold
set totothe
must NO
LTE LST CELLDRXPARA Indicates
exit DRX the
in the downlink
cell
values
is used
have
1000 of
in
better
and the
the
the valueforDRX
quality of
traffic
that volume
operates
FddExitDrxThd
algorithm.
reporting the in and
It isevent. TDD
BTS3900, BTS3900 MOD CELLDRXPARA the FddEnterDrxThd
threshold for UEs to
mode.
expressed
For This
FddEnterDrxThd
details, asthreshold
see a 3GPP NO
LTE LST CELLDRXPARA parameter
Indicates
enter DRX the is
in set
downlink
the to
cell a
is used
parameters
proportion
TS
value 36.331. in
smaller the
of are DRX
the
than small
traffic
that
algorithm.
and volume
operates
close toIt is in TDD
each
BTS3900, BTS3900 MOD CELLDRXPARA transmission
1000, the UE time
will not
threshold
mode.
expressed
other, This
the for
UE UEs
threshold
asmode a with to NO
LTE LST CELLDRXPARA intervals
exit the DRX(TTIs)
exit
is usedDRX
proportion
frequently in inthe
of the DRX
the cell
uplink
once
that dataenters
entering
operates the
in TDD
and
DRX
BTS3900, BTS3900 MOD CELLDRXPARA algorithm.
transmission
exits the
transmission DRX It istime
to mode.
the
mode.
mode.
expressed If
Thisboth the
threshold NO
LTE LST CELLDRXPARA intervals
When
total
values
is used
both
TTIs.of
in the Ifas
(TTIs)
the
the
the a with
DRX traffic
proportion
uplink data
FddEnterDrxThd
volume at aofUE the is
BTS3900, BTS3900 MOD CELLDRXPARA FddExitDrxThd
algorithm.
transmission It istime and
transmission
parameter
equal to or and
FddEnterDrxThd lower to thethe than NO
LTE LST CELLDRXPARA expressed
intervals
Indicates
total TTIs.
FddExitDrxThd (TTIs)
the as
If the a with
length traffic of
this threshold,
parameters
proportion of are the thesmall
downlink
the
volumeUE
parameter
eNodeB data
traffic
at a are UE setis to
BTS3900, BTS3900 MOD CELLDRXPARA and closedecides
transmission
Indicates to each time that
transmission
measurement
equal
1000
the
other,UE to
and orthe
should
the DRX
UE higher length
to thethan
period.
is
retain of NO
LTE LST CELLDRXPARA intervals
the
total
The
this long
TTIs.
traffic
threshold, (TTIs)
DRX If the
volume with
cycle trafficfor
of a
enabled,
its DRX
frequently the
state orthe
eNodeB enter
downlink
a UE
volume
UE
eNodeBduring
directly
DRX. at aenters
data
in determines
the uplink
this
decides UEperiod and
out-
isthat
BTS3900, BTS3900 MOD CELLDRXPARA exits the
transmission
of-synchronization
equal DRX
toshould
or lower to mode.
the than
is
themeasured.
that
When UE
the bothUE Based
should
the retain on NO
LTE LST CELLDRXPARA total
state.
this TTIs.
Set
threshold, If
thisthethe the traffic
the
its
enter measurement
non-DRX
or
FddEnterDrxThd exit state DRX or
volume
parameter
eNodeB
result,
exit
mode, DRX. atdecides
the
but aDRX
toUE
not isthat
a value
BTS3900, BTS3900 MOD CELLDRXPARA parameter
equal to or and
higher the than
greater
the UE
algorithm
Indicates
according than
shoulddecides
the
to the the value
retain
RSRP
DRX NO
LTE LST CELLDRXPARA FddExitDrxThd
this threshold, the
of
its LongDrxCycle;
DRX
whether
threshold
measurement
onduration state
thefor UE
timer or
events enter
should
result
parameter
eNodeB
otherwise,
DRX. decidesare
the setfor
power to of
that
BTS3900, BTS3900 MOD CELLDRXPARA enter
A1
UE and
UEs
1000 orA2
traffic.
when
and exitDRXthe DRX.
that are
eNodeB
is
the
savingUE
Indicates
used should
forgain theofDRX
inter- retain
the DRX NO
LTE LST CELLDRXPARA does
enabled, not maintain
the eNodeB
its
for non-DRX
UEs
inactivity
frequency
synchronization in the
timer
and state
uplink
for
inter-
for or
UEs
directly
exit DRX. determines
out-of-synchronization
BTS3900, BTS3900 MOD CELLDRXPARA when
RAT the eNodeB
blind
UEs.
that
state the UEhandovers
decreases. should NO
LTE LST CELLDRXPARA does
based noton maintain
coverage.
LST enter
Indicates or exit
thethe local DRXIf
synchronization
the RSRP for
BTS3900, BTS3900 CELLHOPARACFG mode, but
identity not
UEs. of the cell.
measurement It
LTE MOD according
uniquely to the a of
identifies
result YES
the serving cellresult
measurement is of
MOD
CELLHOPARACFG cell within anthe eNodeB.
higher
UE traffic. than sum of
BTS3900, BTS3900 CELLHOPARACFG
this threshold and the NO
LTE LST
hysteresis throughout
CELLHOPARACFG
the time-to-trigger,
event A1 is reported. If
the RSRP
measurement result of
the serving cell is
lower than this
used for inter-
frequency and inter-
RAT blind handovers
based on coverage. If
the RSRQ
measurement result of
the serving cell is
MOD
higher than the sum of
BTS3900, BTS3900 CELLHOPARACFG
this threshold and the NO
LTE LST
LST hysteresis
Indicates thethroughout
CELLHOPARACFG Indicates
the the local
time-to-trigger, offset for
BTS3900, BTS3900 CELLULCOMPALGO identity
UL CoMP of the event cell. A3. It A
event A1 identifies
is reported. If YES
LTE MOD uniquely
larger value indicates a
MOD Indicates
the RSRQ whether a
CELLULCOMPALGO cell
that within
a neighboring an eNodeB. cell
BTS3900, BTS3900 CELLULCOMPALGO UE needs
measurement to adjustresult the
of
must
transmit have power
the serving cell is better based NO
LTE LST
quality forthe the reporting
CELLULCOMPALGO on
LST thethan
Indicates
lower MCS. this The
local ID
BTS3900, BTS3900 CELLULPCDEDIC of
of the
indication event.
the cell.minus
threshold is For
sent
It uniquely to the
the
details,
UE through see 3GPP
an RRC TS a YES
LTE MOD identifies
hysteresis athroughput
cell within
MOD
CELLULPCDEDIC 36.331.
message.
BS.
the time-to-trigger, The
BTS3900, BTS3900 CELLULPCDEDIC indication
event A2 isisreported. denoted
Indicates the0 power NO
LTE LST by a bit. Bit indicates
MOD
CELLULPCDEDIC offset
that both of the Ks sounding
and ΔTF
BTS3900, BTS3900 CELLULPCDEDIC reference
are equal to signal0. Bitto1the
Indicates NO
LTE LST indicates that power
PUSCH the
when Ks is
MOD
CELLULPCDEDIC offset of
to the
DeltaMcsEnabled
equal
Indicates thesounding
1.25 and ΔTF
length is of
BTS3900, BTS3900 CELLULPCDEDIC reference
set
is
the to
long signal
UU_DISABLE.
calculated. DRX For
cycle.to the
Indicates the alpha NO
LTE LST PUSCH
details,
Because when
see of the3GPP impactTS
MOD
CELLULPCDEDIC filtering
DeltaMcsEnabledcoefficient is
BTS3900, BTS3900 CELLULPCDEDIC 36.213.
of
usedthe bySRS bandwidth
the UE during
set
and toTA UU_ENABLE.
period NO
LTE LST RSRP measurement
CELLULPCDEDIC specified
Indicates
for path loss by
thethe local
BTS3900, BTS3900 LST DISTBASEDHO TimeAlignmentTimer
identity
Indicates the cell. It
estimation. of the
YES
LTE MOD DISTBASEDHO parameter,
uniquely
measurement
the actual
identifies object a
value
cell within
Indicates of this anparameter
the eNodeB.
threshold
type for distance-
BTS3900, BTS3900 MOD DISTBASEDHO assigned
for distance-based to a UE may
based handovers. The NO
LTE LST DISTBASEDHO be less thanIfthe
handovers.
measurementthe object
configured
distance value. In
between a
BTS3900, BTS3900 ADD type can
MOD DISTBASEDHO addition, the be E-UTRAN,
UE and the cell center NO
LTE LST DISTBASEDHO UTRAN,
DRXPARAGROUP configured
or GERAN.
value will
LST is greater the
Indicates than localthis IDan
ADD be rounded
threshold, down
aIt distance- to
BTS3900, BTS3900 DRXPARAGROUP of the cell.
integralhandovermultiple ofuniquely
LTE DRXPARAGROUP
MOD based
identifies
Indicates awhether cell are is 10.a
within
YES
LST Therefore,
triggered for you this UE.
DRXPARAGROUP BS.
bearers
advised to
tothe which
configure the
BTS3900, BTS3900 DRXPARAGROUP
RMV Indicates
parameter groupID of the
ADD this parameter togroup.
a YES
LTE MOD
DRXPARAGROUP DRX
Indicates
applies parameter the
support length DRX.of
DRXPARAGROUP
DRXPARAGROUP value that is an
the
The Onvalue Duration
integral multiple of ON Timer.
10.
BTS3900, BTS3900 MOD
RMV Because of the impact
ADD indicates
If users that that
hope the the NO
LTE DRXPARAGROUP
DRXPARAGROUP of CQIactually
reporting
DRXPARAGROUP bearers
value support DRX.
LST intervals
BTS3900, BTS3900 MOD
DRXPARAGROUP assignedand
The value toOFF aSRSUE is
ADD transmission
indicates that intervals,
the NO
LTE DRXPARAGROUP equal to or greater
DRXPARAGROUP the
than actual
bearers 80 ms, dovalue not
set of this
support
the
LST Indicates the length of
BTS3900, BTS3900 MOD parameter
DRX.
TimeAlignmentTimer assigned to
DRXPARAGROUP Indicates
the DRX the
inactivitylength of NO
LTE ADD
DRXPARAGROUP a UE
parameter may be greater
to a cycle.value
the
timer.
than short
the DRX
configured
DRXPARAGROUP
LST equal
According to or togreater
3GPP
Indicates
value. the length of
BTS3900, BTS3900 MOD
DRXPARAGROUP than 10240 ms.the If the
ADD specifications,
the DRX NO
LTE DRXPARAGROUP TimingAdvCmdOptSwi
DRXPARAGROUP length of a long DRX
Retransmission Timer.
LST tch
cycle parameter
must be is set to
an
BTS3900, BTS3900 MOD
DRXPARAGROUP Indicates the length of
ADD ON, it ismultiple
integer recommended of that NO
LTE DRXPARAGROUP the DRX Short Cycle
DRXPARAGROUP that
of a the
short LongDrxCycle
DRX cycle.
LST Indicates
Timer. whether
If this
BTS3900, BTS3900 MOD parameter
In addition, be
theset to a
actual
DRXPARAGROUP short
parameter DRX cycles
is set toare1, NO
LTE ADD
DRXPARAGROUP value of smaller
LongDrxCyclethan or
DRXPARAGROUP enabled.
the
equal lengthto 320
assigned to a UE may of this
ms. timer
LST
BTS3900, BTS3900 MOD
DRXPARAGROUP is
beonelessshort
Otherwise, thanthe DRX
theuplink
ADD
ADD cycle. If thisvalue
time alignment parameter NO
LTE DRXPARAGROUP configured
INTERRATHOCOMM
DRXPARAGROUP
LST is set to 2,ofthe
performance
because the oflength
UEs is
impact
BTS3900, BTS3900 GROUP
MOD
DRXPARAGROUP of this
affected.
of the SRS timer If the is two
bandwidth
LST NO
LTE DRXPARAGROUP short DRX
TimingAdvCmdOptSwi
and TA period cycles. If
INTERRATHOCOMM
LST Indicates
this
tch parameter
parameter
specified by the the local
isis set
setIDtoto
BTS3900, BTS3900 GROUP
DRXPARAGROUP of
a
ON, the
large cell.
it isvalue, It uniquely
recommended
TimeAlignmentTimer a UE for YES
LTE MOD identifies
which
that the
parameter. short a cellDRX
Therefore,within a
INTERRATHOCOMM BS.
cycles are
TimeAlignmentTimer
the actual value of enabled
GROUP stays
parameter in short-cycle
ShortDrxCycle be set to
RMV DRX
sf10240.
assigned for aA tolong
smaller
a UE time.
may
INTERRATHOCOMM For
value
be details,
less ofthanthe see the 3GPP
GROUP TS 36.321 5.7.
TimeAlignmentTimer
configured value.
parameter, such as
sf5120, increases the
trigger for inter-RAT
measurement event
ADD A1 or A2. the
Indicates
INTERRATHOCOMM When
hysteresisdetecting for inter- that
GROUP the
RATsignal quality in the
measurement
LST serving
events A1 celland meets A2. the
INTERRATHOCOMM
ADD Indicates
entering
This parameter the ID isofused
condition, the
the
BTS3900, BTS3900 GROUP
INTERRATHOCOMM common
UE does parameter
not
to prevent frequent send a YES
LTE MOD
GROUP group related
measurement
triggering of event to inter-to
report
INTERRATHOCOMM
ADD
MOD RATeNodeB
the handover.
evaluation caused by
BTS3900, BTS3900 GROUP
INTERRATHOCOMM immediately. Instead,
INTERRATHOCOMM radio signal fluctuation. NO
LTE RMV
GROUP the UEway,sends a report
GROUP In this
Indicates thethe RSRP
ADD
INTERRATHOCOMM
MOD
LST only when
probabilityfor the signal
of inter-RAT
ping-
BTS3900, BTS3900 threshold
INTERRATHOCOMM
GROUP
INTERRATHOCOMM
INTERRATHOCOMM quality continuously
pong handovers or NO
LTE measurement event
GROUP
GROUP
GROUP meets
Indicates
handover thethe entering
decisionRSRQ
ADD A1.
MOD
LST condition
threshold
errors during
for
is reduced. the
inter-RAT A
BTS3900, BTS3900 INTERRATHOCOMM When the measured
INTERRATHOCOMM
INTERRATHOCOMM time-to-trigger.
measurement NO
LTE GROUP larger value
RSRP value of ofevent
this
the
GROUP
GROUP Indicates
This
A1. parameter
parameter the RSRP
results helpsin a
ADD
MOD serving cell exceeds
BTS3900, BTS3900 LST threshold
decrease
When
lower the for
the inter-RAT
measured
probability. number
INTERRATHOCOMM
INTERRATHOCOMM this threshold, an NO
LTE INTERRATHOCOMM measurement
of
RSRQoccasionally
value ofevent
the
GROUP
GROUP event
Indicates A1 report
theexceeds
RSRQ will be
GROUP
ADD A2.
triggered
serving event
cell
MOD
LST sent.
threshold for inter-RAT
BTS3900, BTS3900 INTERRATHOCOMM When
reports, thethe
this threshold, measured
average
an
INTERRATHOCOMM
INTERRATHOCOMM measurement NO
LTE GROUP
GROUP event A1 reportevent
RSRP
number value
of of
handovers,the
will be
GROUP
ADD A2.
serving
and the cell number is below of
MOD
LST sent.
BTS3900, BTS3900 INTERRATHOCOMM When
this
wrong the
threshold, measured
handovers. an In
INTERRATHOCOMM
ADD
INTERRATHOCOMM Indicates the offset NO
LTE GROUP
GROUP
INTERRATHOCDMA1
RSRQ
event
summary, A2value
report of
it helps will of
the be
GROUP the event
serving A2 threshold
MOD
LST
XRTTGROUP prevent cell
sent.
Indicates theistime-to-
unnecessary below
BTS3900, BTS3900 for
this inter-RAT
threshold,
handovers.
hysteresis for blind
anB1 B1
event
INTERRATHOCOMM
ADD
INTERRATHOCOMM
LST trigger for event NO
LTE redirections
event
for A2
inter-RAT report relative will be
handover to
GROUP
INTERRATHOCDMA1
GROUP
INTERRATHOCDMA1 related
Indicates to inter-RAT
the local ID
the
sent.
to event
CDMA2000 A2 threshold
1xRTT.
BTS3900, BTS3900 LST
XRTTGROUP
XRTTGROUP handover
of the cell.toIt uniquely
for
This handovers.
parameter is useda YES
LTE INTERRATHOCOMM
LST
MOD CDMA2000
identifies athe 1xRTT.
cell
GROUP Indicates
to
Whenprevent
detecting IDwithin
frequent of
that the
INTERRATHOCDMA1
INTERRATHOCDMA1
ADD BS.
parameter
triggering ofgroup
the signal quality in atevent
BTS3900, BTS3900 XRTTGROUP
XRTTGROUP
INTERRATHOCDMA1 related
evaluation to neighboring
inter-RAT
caused YES
LTE MOD
RMV
XRTTGROUP least
Indicates
handover
one the
to pilot by
INTERRATHOCDMA1
ADD
INTERRATHOCDMA1 radio
cell
strength signal
meets thefluctuation.
threshold entering for
MOD CDMA2000 1xRTT.
BTS3900, BTS3900 XRTTGROUP
INTERRATHOCDMA1
XRTTGROUP In this
condition,way, the
event B1 related todoes
the UE
INTERRATHOCDMA1 NO
LTE RMV
XRTTGROUP probability
not send a of ping-
coverage-based inter-
XRTTGROUP
ADD
INTERRATHOCDMA1
MOD pong handovers
measurement
RAT handover toor to
report
BTS3900, BTS3900 LST
INTERRATHOCDMA1
XRTTGROUP
INTERRATHOCDMA1 handover
the eNodeB
CDMA2000 decision
1xRTT. NO
LTE INTERRATHOCDMA1 Indicates the pilot A
XRTTGROUP
XRTTGROUP errors is
immediately.
When the reduced. Instead,
XRTTGROUP
ADD strength threshold for
MOD
LST larger
the value
measurement avalue
UE sends of this
report
BTS3900, BTS3900 INTERRATHOCDMA1 event
parameter B1 related
results to
INTERRATHOCDMA1
ADD
INTERRATHOCDMA1 only
exceeds whenthis signal a
thethreshold, in NO
LTE XRTTGROUP load-
lower or service-based
probability of
XRTTGROUP
RLFTIMERCONSTGR
XRTTGROUP quality continuously
a measurement report
MOD
LST
OUP inter-RAT
ping-pong
meets the
will be sent. handover
handovers
entering to
BTS3900, BTS3900
INTERRATHOCDMA1
ADD
INTERRATHOCDMA1
LST CDMA2000
or handover
condition during1xRTT.
decision the NO
LTE
XRTTGROUP
RLFTIMERCONSTGR
RLFTIMERCONSTGR When
errors.thethe local cell
time-to-trigger.
Indicates
BTS3900, BTS3900 LST
OUP
OUP measurement
This parameter
identity. It uniquely value
helps
INTERRATHOCDMA1
LST exceeds
decrease athe this threshold, YES
LTE MOD identifies cellnumber
within
XRTTGROUP
RLFTIMERCONSTGR
RLFTIMERCONSTGR
ADD a
of
an measurement
occasionally
eNodeB. report
Indicates
will be sent. the RLF
BTS3900, BTS3900 OUP
OUP
RLFTIMERCONSTGR triggered event
timer and constants YES
LTE MOD reports,
RMV
OUP group
Indicates ID.the average
RLFTIMERCONSTGR
ADD
MOD number ofthe length of
handovers
BTS3900, BTS3900 OUP
RLFTIMERCONSTGR
OUP the
and the numberFor
timer T301. of
RLFTIMERCONSTGR NO
LTE RMV
OUP details, see 3GPP TS
wrong handovers,
OUP Indicates
ADD
RLFTIMERCONSTGR
MOD
LST preventingthe length of
36.331.
BTS3900, BTS3900 RLFTIMERCONSTGR
OUP the timer T310. For
unnecessary
RLFTIMERCONSTGR
RLFTIMERCONSTGR NO
LTE OUP details,
handovers. see 3GPP TS
OUP
OUP Indicates the length of
ADD
MOD 36.331.
BTS3900, BTS3900 LST the timer T311. For
RLFTIMERCONSTGR
RLFTIMERCONSTGR
RLFTIMERCONSTGR NO
LTE Indicates
details, see the3GPP maximum TS
OUP
OUP
OUP
ADD number
36.331. of successive
MOD
LST
BTS3900, BTS3900 RLFTIMERCONSTGR "out of sync"
RLFTIMERCONSTGR
RLFTIMERCONSTGR Indicates NO
LTE OUP indicationsthe maximum
received
OUP
OUP number
MOD from L1.of For successive
details,
BTS3900, BTS3900 LST
ADD "in
RLFTIMERCONSTGR seesync"
3GPPindications
TS 36.331. NO
LTE RLFTIMERCONSTGR
CELLEXTENDEDQCI Indicates
received from the extended
L1. For
OUP
OUP
LST QoS Class
details, seeIdentifier
3GPP TS
BTS3900, BTS3900 LST
CELLEXTENDEDQCI (QCI),
36.331.which is YES
LTE RLFTIMERCONSTGR
MOD required by the
OUP
CELLEXTENDEDQCI operator for service
RMV differentiation.
CELLEXTENDEDQCI
ADD
CELLEXTENDEDQCI
LST Indicates the local ID
BTS3900, BTS3900 CELLEXTENDEDQCI of the cell. It uniquely
ADD YES
LTE MOD identifies a cell within a
CELLEXTENDEDQCI
CELLEXTENDEDQCI Indicates
BS. the ID of a
BTS3900, BTS3900 MOD
RMV parameter group
ADD NO
LTE CELLEXTENDEDQCI
CELLEXTENDEDQCI related to the
Indicates inter-
ID of a
CELLEXTENDEDQCI
LST frequency
parameter handover.
group
BTS3900, BTS3900 MOD
CELLEXTENDEDQCI
ADD related to inter-RAT NO
LTE CELLEXTENDEDQCI Indicates
CELLEXTENDEDQCI handover the to ID of a
LST parameter
BTS3900, BTS3900 MOD CDMA2000group 1xRTT.
CELLEXTENDEDQCI related to inter-RAT NO
LTE ADD
CELLEXTENDEDQCI
CELLEXTENDEDQCI handover
Indicates theto ID of a
LST
BTS3900, BTS3900 MOD CDMA2000
group HRPD.
of common
CELLEXTENDEDQCI NO
LTE ADD
CELLEXTENDEDQCI parameters related to
CELLEXTENDEDQCI
LST Indicates
inter-RATthe ID of a
handover.
BTS3900, BTS3900 MOD
CELLEXTENDEDQCI parameter group
ADD NO
LTE CELLEXTENDEDQCI related to inter-RAT
CELLEXTENDEDQCI
LST Indicates
handover the ID of a
to GERAN.
BTS3900, BTS3900 MOD
CELLEXTENDEDQCI parameter group
ADD NO
LTE CELLEXTENDEDQCI related to inter-RAT
CELLEXTENDEDQCI
LST Indicates
handover the ID of a
to UTRAN.
BTS3900, BTS3900 MOD
CELLEXTENDEDQCI parameter group
ADD NO
LTE CELLEXTENDEDQCI related to intra-
CELLEXTENDEDQCI
LST frequency handover.
BTS3900, BTS3900 MOD
CELLEXTENDEDQCI Indicates the ID of a
ADD NO
LTE CELLEXTENDEDQCI DRX parameter group.
CELLEXTENDEDQCI
LST Indicates the RLF
BTS3900, BTS3900 MOD
CELLEXTENDEDQCI
ADD timer and constants NO
LTE CELLEXTENDEDQCI
CELLEXTENDEDQCI indication.
LST Indicates the RLF
BTS3900, BTS3900 MOD
CELLEXTENDEDQCI timer and constants NO
LTE CELLEXTENDEDQCI
MOD group ID. the ID of a
Indicates
LST
BTS3900, BTS3900 CELLSTANDARDQCI
CELLEXTENDEDQCI parameter group
NO
LTE LST related
Indicatesto the
inter-
ID of a
MOD
CELLSTANDARDQCI frequency
parameter handovers.
group
BTS3900, BTS3900 CELLSTANDARDQCI
related to inter-RAT NO
LTE LST Indicates
MOD handover the to ID of a
CELLSTANDARDQCI parameter
BTS3900, BTS3900 CELLSTANDARDQCI CDMA2000group 1xRTT.
related to inter-RAT NO
LTE LST
MOD handover
Indicates theto ID of a
CELLSTANDARDQCI
BTS3900, BTS3900 CELLSTANDARDQCI CDMA2000
common parameterHRPD.
NO
LTE LST group related to inter-
MOD
CELLSTANDARDQCI Indicates the ID of a
RAT handover.
BTS3900, BTS3900 CELLSTANDARDQCI parameter group
NO
LTE LST related to inter-RAT
MOD
CELLSTANDARDQCI Indicates
handover the ID of a
to GERAN.
BTS3900, BTS3900 CELLSTANDARDQCI parameter group
NO
LTE LST related to inter-RAT
MOD
CELLSTANDARDQCI Indicates
handover the ID of a
to UTRAN.
BTS3900, BTS3900 CELLSTANDARDQCI parameter group
NO
LTE LST related to intra-
MOD
CELLSTANDARDQCI frequency handover.
BTS3900, BTS3900 CELLSTANDARDQCI Indicates the ID of a
NO
LTE LST DRX parameter group.
MOD
CELLSTANDARDQCI Indicates the interval
BTS3900, BTS3900 CELLSTANDARDQCI at which scheduling
NO
LTE LST request indicators are
MOD
CELLSTANDARDQCI sent.
Indicates the RLF
BTS3900, BTS3900 CELLSTANDARDQCI
timer and constants NO
LTE LST
MOD indication.
CELLSTANDARDQCI Indicates the RLF
BTS3900, BTS3900 CELLSTANDARDQCI
timer and constants NO
LTE LST
group ID.
CELLSTANDARDQCI
duration for the
eNodeB to release
services with a specific
Indicates
QCI after the the ID eNodeB of a
mobility
detects that loadthe balancing
radio
(MLB) parameterWhen
link is abnormal.
group
the eNodeB for a QCI. detects The
MOD value
that the radio link is If
255 is invalid.
BTS3900, BTS3900 CELLSTANDARDQCI this parameter is set to
ADD abnormal, the eNodeB NO
LTE LST a value ranging from
INTERRATHOCDMAH
MOD waits for
Indicates the the UE to 0
CELLSTANDARDQCI to 9, the
Indicates IDthe musttime-to- be B1
BTS3900, BTS3900 RPDGROUP
CELLSTANDARDQCI initiate an RRC
hysteresis for event
ADD
LST set in
trigger the
connection for associated
event
related to inter-RAT B1 NO
LTE LST
INTERRATHOCDMAH
INTERRATHOCDMAH MlbQciGroup
related to the
reestablishment
Indicates
handover inter-RAT
to local MO. ID This
CELLSTANDARDQCI
BTS3900, BTS3900 RPDGROUP parameter
handover
procedure to
of the cell. It HRPD.
CDMA2000 is
to valid
restore
uniquely only
LST when
CDMA2000
services. the If Qci theHRPD. YES
LTE MOD identifies
This
When
parameter
Indicates
parameter
athe
detecting
cell
in IDwaiting
the
within thea
isofused
that
INTERRATHOCDMAH
INTERRATHOCDMAH
ADD duration
BS.
to times
prevent frequent out, the
parameter
CellStandardQci
the signalreleases group MO
quality in atis
BTS3900, BTS3900 RPDGROUP
RPDGROUP
INTERRATHOCDMAH eNodeB
triggering of event the
related
set
leastto 6,
one to7,neighboring
inter-RAT
8, or 9. This YES
LTE MOD
RMV
RPDGROUP services.
Indicates
evaluation thecausedpilot by
handover
parameter
cell meets toisfluctuation.
the valid
entering only
INTERRATHOCDMAH
ADD
INTERRATHOCDMAH
MOD strength
radio signal threshold for
BTS3900, BTS3900 CDMA2000
for LTE
condition, TDD the HRPD.
cells.
UE does
RPDGROUP
INTERRATHOCDMAH
RPDGROUP
INTERRATHOCDMAH event B1
In this way, the related to NO
LTE RMV
RPDGROUP not
load- send a of ping-
or service-based
RPDGROUP probability
ADD
INTERRATHOCDMAH
MOD
LST measurement
inter-RAT
pong handovers handover reportor to to
BTS3900, BTS3900 INTERRATHOCDMAH
RPDGROUP the eNodeB
INTERRATHOCDMAH
INTERRATHOCDMAH CDMA2000
handover HRPD.
decision NO
LTE RPDGROUP Indicates
immediately. the pilot
Instead,
RPDGROUP
RPDGROUP When
errors the
is reduced. Afor
ADD
MOD
LST strength
the UEvalue
measurement threshold
sends avalue
report
BTS3900, BTS3900 INTERRATHOCDMAH larger
event B1 thisrelated of this to
INTERRATHOCDMAH
ADD
INTERRATHOCDMAH only
exceeds when
parameter the signal
threshold,
results in a NO
LTE RPDGROUP load- or service-based
RPDGROUP
INTERRATHOGERAN
RPDGROUP quality
a continuously
measurement
lower probability report
of
MOD
LST
GROUP Indicates
inter-RAT
meets
will be the sent. the
handover
entering to
BTS3900, BTS3900 ping-pong
Indicates
hysteresis the
handovers
for time-to-
event B1
INTERRATHOCDMAH
ADD
INTERRATHOCDMAH
LST CDMA2000
condition during HRPD. the NO
LTE or
trigger
handover
related for event
to the decision
inter-RAT B1
RPDGROUP
INTERRATHOGERAN
RPDGROUP
INTERRATHOGERAN When the
time-to-trigger.
Indicates local ID
errors.
related
handover to inter-RAT
BTS3900, BTS3900 LST
GROUP
GROUP of cell.to
measurement
Thistheparameter
handover
GERAN.
toIt GERAN.
value
uniquelyhelps
INTERRATHOCDMAH
LST This
exceeds
decreaseparameter
this
the is useda
threshold,
number YES
LTE MOD identifies
When
Indicates a
detecting
the cell RSSI within
that
RPDGROUP
INTERRATHOGERAN to
a prevent
measurement
Indicates frequent
the ID report
of
INTERRATHOGERAN
ADD of
BS.
the occasionally
signal
threshold
triggering
will be sent. quality
for
ofgroupevent
event inthe
at
B1
BTS3900, BTS3900 GROUP
GROUP
INTERRATHOGERAN parameter
triggered
least one event
neighboring
related
evaluation to coverage-
caused by YES
LTE MOD
RMV
GROUP related
reports,
cell meets to
the inter-RAT
theaverage
entering
INTERRATHOGERAN based
radio
handover
number inter-RAT
signal to
of the fluctuation.
GERAN.
handovers
ADD
INTERRATHOGERAN
MOD condition, UE does
BTS3900, BTS3900 GROUP handover
In
and this
theway, tothe
number GERAN. of
INTERRATHOGERAN
GROUP
INTERRATHOGERAN not send a NO
LTE RMV A UE sends
probability
wrong of
handovers, a ping-
GROUP
GROUP measurement report
ADD
INTERRATHOGERAN
MOD
measurement
Indicates
pong handovers
preventing the Ec/N0 reportor to
BTS3900, BTS3900 LST the eNodeB
related
threshold to for
event event B1 B1 to
INTERRATHOGERAN
GROUP
INTERRATHOGERAN handover
unnecessary decision NO
LTE INTERRATHOGERAN immediately.
the eNodeB
related
Indicates to Instead,
when
coverage-
the RSSI the
GROUP
GROUP errors
handovers. is reduced. A
GROUP
ADD the
RSSI
based UEin
threshold sends
atfor
inter-RATleast athisreport
oneB1
MOD
LST larger value ofevent
BTS3900, BTS3900 INTERRATHOGERAN only
GERAN
handover
related when
parameter tocell
tothe
load- signal
exceeds
UTRAN.
results or in a
INTERRATHOGERAN
ADD
INTERRATHOGERAN NO
LTE GROUP quality
this
This
lower continuously
threshold
parameter
service-based
probability and
inter-of
GROUP
INTERRATHOUTRAN
GROUP
MOD meets
other
specifies
RAT the
triggering
handover
ping-pong theentering
handovers to
BTS3900, BTS3900 LST
GROUP
INTERRATHOGERAN
ADD condition
conditions
requirement
GERAN.
or handover during
are for met.
decision theFor
Ec/N0 NO
LTE INTERRATHOGERAN
LST
GROUP
INTERRATHOUTRAN time-to-trigger.
details,
of
Whenthe
errors. see
target
the 3GPP
UTRAN
measured TS
INTERRATHOUTRAN Indicates
This parameter the local helps ID
BTS3900, BTS3900 LST
GROUP
GROUP 36.331.
cell.
RSSI
of For
value
the cell.thea cell with
exceeds
It uniquely
Indicates
decrease the time-to-
number YES
LTE INTERRATHOGERAN
LST
MOD large
this signal
threshold,
identifies
trigger for a fading
cell
event awithin
B1 a
GROUP
INTERRATHOUTRAN of occasionally
variance,
measurement
Indicates set
the this
ID report
of the
INTERRATHOUTRAN
ADD BS.
related
Indicates to RSCP
inter-RAT
the
BTS3900, BTS3900 GROUP triggered
parameter
will be sent.
parameter event
to
groupa largeB1
GROUP
INTERRATHOUTRAN threshold
handover
hysteresis
reports, thefor
tofor event
UTRAN.
event B1
average YES
LTE MOD
RMV value
related
When to toprevent
inter-RAT
coverage-
detecting that
GROUP related
number to
of inter-RAT
handovers
INTERRATHOUTRAN
ADD unnecessary
handover
Indicates
based
the signal to
the
inter-RAT UTRAN.
quality Ec/N0 in at
MOD handover
and the to
number UTRAN.
BTS3900, BTS3900 GROUP
INTERRATHOUTRAN
GROUP handovers.
threshold
handover for
to For
event
UTRAN. aofcellB1
INTERRATHOUTRAN least
This
wrong one
parameter neighboring
handovers, isfading
used NO
LTE RMV
GROUP with
related
This small signalor
to load-
parameter
GROUP cell
to meets
prevent
preventing the
frequent entering
ADD
INTERRATHOUTRAN
MOD variance,
service-based
specifies
condition, set
the
theeventthis
inter-
UE does
BTS3900, BTS3900 LST triggering
unnecessary of
INTERRATHOUTRAN
GROUP
INTERRATHOUTRAN parameter
RAT handover
requirement
not send a to a
for small
toRSCP NO
LTE INTERRATHOUTRAN evaluation
handovers. caused by
GROUP
GROUP value
UTRAN.
of to
thesignal
target
measurement ensure UTRAN timely
report to
GROUP
ADD radio fluctuation.
MOD
LST handovers.
This
cell.
the parameter
eNodeB A large
BTS3900, BTS3900 INTERRATHOUTRAN In this way,
value the
LTE
INTERRATHOUTRAN
INTERRATHOUTRAN When of
specifies thethis
immediately.
probability the of
parameter
Instead,
ping-
NO
GROUP results
Indicates in a low
GROUP
GROUP
ADD
requirement
measurement
the
pong UE sendsRSCP
handovers
the for Ec/N0
avalue
report
or B1
MOD
LST probability
threshold
of the
exceeds target for
this of handover
event
UTRAN
threshold,
BTS3900, BTS3900 INTERRATHOUTRAN only
handoverwhendecision the signal
INTERRATHOUTRAN
INTERRATHOUTRAN to theWhen
related
cell.
a UTRAN
measurementto load-the cell, or and
report NO
LTE GROUP quality
errors iscontinuously
reduced. A to
GROUP
GROUP a small
service-based
measurement value leads
inter-
ADD
MOD
LST
will
meetsbe value
larger
a
RAT
sent.
the
highhandover
probability. of value
entering this
tothe
BTS3900, BTS3900 INTERRATHOUTRAN exceeds
condition
parameter this
during threshold,
results in a
INTERRATHOUTRAN
INTERRATHOUTRAN When
UTRAN. the NO
LTE GROUP a measurement
time-to-trigger.
lower probability report
of
GROUP
GROUP measurement
This parameter value
MOD may
This be sent.
parameter
ping-pong For
handovers a cell
helps
BTS3900, BTS3900 LST exceeds
specifies this
the threshold,
INTERRATHOUTRAN with
or large
decrease
handover for signal
the number
decision fading NO
LTE INTERRATHOUTRAN a measurement
requirement report
GROUP variance,
of occasionally
errors. set thisRSCP
GROUP will
of be
the sent.
target UTRAN
LST parameter
triggered event to a large
cell.
value
reports, to theprevent average
INTERRATHOUTRAN
When
unnecessary
number the of handovers
GROUP
measurement
handovers.
and the number Forvalue aofcell
exceeds
with
wrong small thissignal
handovers, threshold,fading
a measurement
variance,
preventing set thisreport
will be sent.to a small
parameter
unnecessary
Indicates the time-to-
ADD trigger for inter-
INTERFREQHOGROU frequency
P measurement
ADD
LST Indicates the event
INTERFREQHOGROU A1 or A2. for inter-
hysteresis
INTERFREQHOGROU Indicates
When the local
detecting that ID
BTS3900, BTS3900 P
P frequency
of the cell. It uniquely
LST the signal quality
measurement in the
events YES
LTE MOD identifies
serving a cell
cell within a
INTERFREQHOGROU
INTERFREQHOGROU
ADD
A1 and
Indicates
BS. the ID of the
A2. meets
This the
BTS3900, BTS3900 P triggering
parametercondition,
parameter is used to
group
P
INTERFREQHOGROU the YES
LTE MOD
RMV
P related to inter- send
UE
prevent does
frequent not
INTERFREQHOGROU a measurement
triggering
frequency of event
handover. report
ADD
INTERFREQHOGROU
MOD
BTS3900, BTS3900 P to the eNodeB
evaluation caused by
INTERFREQHOGROU
P
INTERFREQHOGROU NO
LTE RMV immediately. Instead,
radio signal fluctuation.
P
P Indicates thethe RSRP
ADD
INTERFREQHOGROU the UEway,
In this sends a report
MOD
LST threshold for inter-
BTS3900, BTS3900 INTERFREQHOGROU
P only when the
probability of ping-signal
INTERFREQHOGROU
INTERFREQHOGROU frequency NO
LTE P quality
pong continuously
handovers or
P Indicates
P
ADD
MOD
measurement
meets
handover thethe RSRQ
entering
decision event
BTS3900, BTS3900 LST threshold
A1. for inter-
INTERFREQHOGROU
INTERFREQHOGROU condition
errors during
is reduced. theA NO
LTE INTERFREQHOGROU frequency
When the measured
P
P time-to-trigger.
larger
Indicates value of
the exceeds This
this
RSRP
P
ADD measurement
RSRP value event
MOD
LST parameter
parameter
threshold helps
results
for inter- in a
BTS3900, BTS3900 INTERFREQHOGROU A1.
this threshold,
decrease the a
number
INTERFREQHOGROU
INTERFREQHOGROU lower
frequency probability. NO
LTE P When
measurement
of the measured
occasionally report
P
P Indicates
measurement
Indicates the RSRQ
the exceedsevent
ADD
MOD RSRQ
will be
triggered value
sent.
event
BTS3900, BTS3900 LST threshold
A2.
Indicates
hysteresis for
thefor inter-
time-to-
event
INTERFREQHOGROU
INTERFREQHOGROU this threshold,
reports, the a
average NO
LTE INTERFREQHOGROU frequency
Indicates
When
trigger
A4. Thisthe the RSRP
measured
forparameter
event A4 is for
P
P measurement
number offor report
handovers,
P
ADD measurement
threshold
RSRP
the
used value
inter-frequency
to prevent is event
event
below A4
MOD
LST will
and be
thetosent.
number
BTS3900, BTS3900 INTERFREQHOGROU
INTERFREQHOGROU
A2.
related
the threshold,
handover.
frequent
Indicates coverage-
When
triggering
the a of of
RSRQ NO
LTE INTERFREQHOGROU wrong
When
based handovers.
the measured
inter-frequency In
P
P measurement
detecting
event
threshold that
evaluation
for report
the
event A4
P
ADD summary,
RSRQ
handover. valueit helps
Whenisinbelowthe
MOD
LST will
signal
causedbe quality
related sent.
by
to radio
coverage- at
signal
BTS3900, BTS3900 INTERFREQHOGROU prevent
this unnecessary
threshold,
measured RSRP a value
INTERFREQHOGROU
INTERFREQHOGROU least
based one
fluctuation. neighboring
In this
inter-frequency way, NO
LTE P handovers.
measurement
exceeds report
P
P cell meetsthis
the probability
handover. thethreshold,
When entering
of ping-
the
ADD
MOD
LST will
event behandovers
condition,
pong sent.
A4 isthereported.
UEorvalue
does
BTS3900, BTS3900 measured RSRQ
INTERFREQHOGROU
INTERFREQHOGROU
INTERFREQHOGROU The
not value
send this
handover of this
adecision NO
LTE exceeds threshold,
P
P
P Indicates
parameter
measurement
errors A4 the
is reduced. RSRP
isreported.
alsoreportused
A to
ADD event is
MOD threshold
BTS3900, BTS3900 LST
INTERFREQHOGROU The value of this A4
as
the the
largereNodeBRSRP
value for ofevent
threshold
this
INTERFREQHOGROU
INTERFREQHOGROU related
for event
immediately. toA4load-based
related
Instead,
results in to
a NO
LTE P parameter
Indicates is also used
P
P
ADD the
lower
as sendsRSRQ
inter-frequency
distance-based, the
UEprobability.
the RSRQ UL-
a report
MOD threshold
BTS3900, BTS3900 LST
INTERFREQHOGROU only whenfor
handover.
power-based,
threshold theevent
When
for or
event theA4
SPID-
signal A4
INTERFREQHOGROU
INTERFREQHOGROU related
measured
based to load-based
RSRP value
inter-frequency NO
LTE P quality
related continuously
to distance-
P
P inter-frequency
exceeds
handover this
back threshold,
to the
ADD
MOD meets
based, the entering
UL-power-
BTS3900, BTS3900 LST handover.
event
HPLMN. A4 is When
reported. the
INTERFREQHOGROU
INTERFREQHOGROU condition
based, or during
SPID-based the NO
LTE INTERFREQHOGROU measured
The value RSRQ
of this value
P
P time-to-trigger.
inter-frequency
Indicates the RSRP
P
ADD exceeds
parameter thisis threshold,
also used
MOD
LST This
Indicates
handover
thresholdparameter
the
back
for helps
offset
to thefor
BTS3900, BTS3900 INTERFREQHOGROU event
as the
decrease
event A4
RSRP
A3 is
the reported.
threshold
number
associated
INTERFREQHOGROU
INTERFREQHOGROU HPLMN.
frequency-priority- NO
LTE P The
for
of
with value
Indicates
event
occasionallyA4of related
the
inter-frequencythis
RSRQ to
P based inter-frequency
ADD
MOD parameter
threshold
triggered
handover. is
for
frequency-priority-
event also
Thisevent used
BTS3900, BTS3900 LST measurement
INTERFREQHOGROU as the
reports,
parameter RSRQ
frequency-priority-
based or service-
thethe average
determines NO
LTE INTERFREQHOGROU A1. When
P
P threshold
based
number
the border of for event A4
inter-frequency
handovers,
between
P
ADD measured RSRP value
MOD
LST related
measurement
handover.
and
the to
the number
serving frequency-event
of
BTS3900, BTS3900 INTERFREQHOGROU
INTERFREQHOGROU exceeds
priority-based
A1. thiscell or
and
threshold, NO
LTE INTERFREQHOGROU wrong
the handovers.
neighboring cell.In If
P
P an event theA1
service-based
When
Indicates report
measured
the inter-will
RSRP
P
ADD summary,
the parameter it helpsis set to
MOD
LST be sent. handover.
frequency
RSRQ
BTS3900, BTS3900 INTERFREQHOGROU a large value
threshold
prevent for exceeds
event
unnecessary
value, an inter- A1
INTERFREQHOGROU
INTERFREQHOGROU this threshold,
associated
handovers. withan event- NO
LTE P frequency handover is
P
P Indicates
event A1 report
A3-triggered the RSRP
inter- will be
ADD
MOD performed only when
LST threshold
BTS3900, BTS3900 INTERFREQHOGROU
INTERFREQHOGROU the signal for
sent.
frequency event
handover.
quality ofA2 the NO
LTE INTERFREQHOGROU associated
When with
the measured event-
P
P neighboring
Indicates cell
the exceeds
RSRP is
P
ADD A3-triggered
RSRP value inter-
MOD
LST significantly
threshold for better than
BTS3900, BTS3900 INTERFREQHOGROU frequency
this
that threshold,
of the handover.
serving a cell
INTERFREQHOGROU
INTERFREQHOGROU frequency-priority- NO
LTE P When
measurement
and the triggering
other measured report
P
P Indicates
based the isRSRQ
inter-frequency
ADD
MOD RSRP
will be
conditions value
sent. are below
met. For
BTS3900, BTS3900 LST threshold
measurement for inter-event
INTERFREQHOGROU
INTERFREQHOGROU
ADD the threshold,
details, see 3GPP a TS NO
LTE INTERFREQHOGROU frequency
A2.
P
P
INTRAFREQHOGROU measurement
36.331. report
P measurement
MOD
LST
P
If the
will sent. event
bemeasured RSRP
BTS3900, BTS3900 A2.
value is less than this
INTERFREQHOGROU
INTERFREQHOGROU
LST NO
LTE When
threshold, the measured
an event A2
P
P
INTRAFREQHOGROU Indicates the local ID
RSRQ
report will valuebe is below
sent.
BTS3900, BTS3900 LST
P of the cell. It uniquely
this threshold, a YES
LTE INTERFREQHOGROU
MOD identifies a cellreport within a
measurement
P
INTRAFREQHOGROU BS.
will be sent.
P
RMV
INTRAFREQHOGROU
P
Indicates
trigger forthe intra-
hysteresis handover
frequency for intra-
ADD frequency
event A3. handover
INTRAFREQHOGROU event
When A3. the This UE detects
P parameter
that the signal decreasesquality
LST frequent
in the serving eventcell and
INTRAFREQHOGROU triggering
that in at least
Indicates dueID
the to
one radio
of the
ADD Indicates the offset for
BTS3900, BTS3900 P signal
neighboring
parameter fluctuations cell
group meet and
INTRAFREQHOGROU event A3. If the YES
LTE MOD reduces
the
relatedentering the
to intra- probability
condition,
P parameter is set to a
INTRAFREQHOGROU
ADD of
it handover
does
frequency not handover. decision
immediately
MOD large value, an intra-
BTS3900, BTS3900 P
INTRAFREQHOGROU errorsaand
send ping-pong
measurement
INTRAFREQHOGROU frequency handover NO
LTE RMV
P handovers.
report to theAeNodeB. larger is
P performed
ADD
INTRAFREQHOGROU
MOD
LST Instead, the UE when
value of this onlyparameter
sends
BTS3900, BTS3900 INTRAFREQHOGROU
P the
resultssignal
a report inonlyaquality
lowerwhenofthe the
INTRAFREQHOGROU
INTRAFREQHOGROU NO
LTE P neighboring
probability.
signal quality Thecell
meetsis
P
P
MOD significantly
hysteresis
the entering for better
eventthan
condition
BTS3900, BTS3900 LST
INTRAFREQHOGROU that of the
inter-frequency
throughout serving
the time-to- cell NO
LTE INTRAFREQHOGROU
P and
handoverother
trigger. whether tois
Indicates triggering
event A3
P
conditions
the
Thissame asarethe met. For
BTS3900, BTS3900 LST EMC
LST enable
Indicates
details,
parameter
or the
see
disable
3GPP ofvalue
id helps the
TS
INTRAFREQHOGROU of this
decrease
emergency parameter.
the number
calls. It is For YES
LTE MOD EMC operator.
36.331.
P details,
of see 3GPP
occasionally
recommended thatTS this
BTS3900, BTS3900 MOD EMC 36.331. event
triggered
parameter be set to a
reports, NO
LTE LST EMC value
Indicates in the average
accordance
whether the
number
with the of
operator supportsactualhandovers,
BTS3900, BTS3900 MOD EMC and the number
emergency
emergency
Indicates the calls of
call NO
LTE LST EMC incorrect
capability handovers,
of the in the
initiated
Allocation byand UEs
preventing
operator.
limited service state.
BTS3900, BTS3900 MOD EMC Retention
Indicates
unnecessary
Indicates Priority
whether
the eNodeB to
Indicates the NO
LTE LST EMC (ARP)
enable
handovers.
coding value
scheduling
scheme of
The for the
time-
Allocation
dedicated
request
to-trigger and
emergency
indication
for inter-
BTS3900, BTS3900 MOD EMC Global
Retention eNodeB Priority ID IE
call
(SRI)
and bearer.
frequency
Indicates adaptation.
Reporting thehandover
length
Cell If ID
this
of NO
LTE MOD
LST EMC (ARP) value of the
switch
event
a
IE long
in A3
the is RIM
DRX turned
is the cycle on,
same that the
GLOBALPROCSWITC default emergency call
SRI
message.period
asapplied
is the value Ifadaptively
only of to
the this
EPCnon-
BTS3900, BTS3900 H bearer.
MOD changes
parameter.
power-saving
devices based
that exchange UEs on the NO
LTE LST
GLOBALPROCSWITC SRI
whose
RIM algorithm.
subscriber
messages Ifwith
this
GLOBALPROCSWITC Indicates whether the
BTS3900, BTS3900 H switch
profile
eNodeBs is
ID turned
for
are off,
provided the
H handover request NO
LTE MOD
LST SRIHuawei
period and
RAT/frequency
by is thethe value
priority
message
of thedevices for a
SriPeriod
GLOBALPROCSWITC
GLOBALPROCSWITC (RFSP)
peer indexes adopt are
handover
parameter from
in thetheE- the
BTS3900, BTS3900 H
H contained
private coding in RFSP
UTRAN
Indicates
CellStandardQci tothe UTRAN ID of MO. aor NO
LTE LST index
scheme, set.set Because
this of
ADD MLBQCIGROUP GERAN
mobility contains
load balancing the
GLOBALPROCSWITC the impact
parameter of the
to Private SRS
BTS3900, BTS3900 LST UE-EUTRA-Capability
H MLBQCIGROUP (MLB)
bandwidth
Coding. parameter
In and other TA YES
LTE MOD MLBQCIGROUP information
group for athis element
QCI. This
period
Indicates
cases, specified
set the uplinkby the
RMV MLBQCIGROUP (IE).
parameter is valid only
ADD MLBQCIGROUP TimeAlignmentTimer
minimum
parameterguaranteed to Standard
BTS3900, BTS3900 for LTE TDD
parameter, cells.
MOD MLBQCIGROUP bit rate.
Coding. Thisthe actual NO
LTE Indicates
value of the
this downlink
parameter
LST MLBQCIGROUP parameter
Indicates the control is valid only
ADD MLBQCIGROUP minimum
assigned
for LTEofTDD
mode guaranteed
to
the aX2 UE may
cells.
BTS3900, BTS3900
MOD MLBQCIGROUP bit rate.
be less than
interface, This which the NO
LTE
LST MLBQCIGROUP parameter
determinesis
configured valid
value.
the only
In
control
Indicates
for LTE
addition, TDD the
the
policies of users and minimum
cells.
BTS3900, BTS3900 MOD S1REESTTIMER
length
configured
the SON of function
the S1 re-
value will
on NO
LTE LST S1REESTTIMER
establishment
be
the rounded
X2 interface. down timer. to an
When
Indicates
integral the maximum
multiple of 10.
BTS3900, BTS3900 MOD S1REESTTIMER it is set to
length
Therefore, of the you S1are re- NO
LTE LST S1REESTTIMER MANUAL_MODE, only
establishment
advised towhether timer.
configure
ADD X2INTERFACE users
Indicates can control the
the
BTS3900, BTS3900 this
X2 parameter tobe a itof
MOD X2INTERFACE X2 interface.
Indicates
interface thecan When
length NO
LTE value
is
the set that
to
On Duration is an Timer
DSP X2INTERFACE automatically removed.
ADD X2INTERFACE integral
AUTO_MODE,
that applies multiple onlyboth of
to 10.
BTS3900, BTS3900 If users hope
MOD X2INTERFACE users and
non-power-saving thethat SONthe UEs NO
LTE value actually
DSP X2INTERFACE function
whose can control
RFSP indexes
assigned
the X2
are to a UE
interface.
contained is
When
in the
BTS3900, BTS3900 MOD DRX
equal
the SON to or
RFSP index set. For greater
function NO
LTE LST DRX
than
Indicates80about
automatically
details ms, theset theupof
length
sets
this
BTS3900, BTS3900 MOD DRX TimeAlignmentTimer
the
an X2
timer, DRX see Inactivity
interface, 3GPPthis TS
parameter
Timer
parameter that to
applies
is seta valuetoofonly NO
LTE LST DRX 36.321. Because
equal
to
AUTO_MODE
the to or of
non-power-saving
impact greater
CQIby
BTS3900, BTS3900 MOD DRX than
UEs
default. 10240
whose When
reporting intervals ms.
RFSP If the
users and
TimingAdvCmdOptSwi NO
LTE LST DRX indexes
add are
SRS transmissionX2
or modify contained
an
tch
in theparameter
interface,
intervals, RFSP users
the iscan
index
actual setset. to
ON,
For
set this
value it is
details recommended
thisabout
ofparameter parameter this
to
that
timer, the
AUTO_MODE
assigned seeto3GPP a UE or TS may
LongDrxCycleSpecial
36.321.
MANUAL_MODE.
be greater than the
parameter
configured be value. set to a
value smaller than or
equal to 320 ms.
profile ID for
RAT/frequency priority
(RFSP) indexes are
contained in the RFSP
Indicates
index set.the Accordinglength of to
Indicates
the DRX
Indicates whether
Short
3GPP specifications,
the long Cycle to
DRX
enable
Timer
the length
cycle for orintra-RAT
that disable
applies
of a long short
only
DRX
to
DRX
ANR. cycles
non-power-saving
cycle for
must
If intra-RAT non-
be ANR an
BTS3900, BTS3900 MOD DRX Indicates theRFSP long DRX
power-saving
UEs
integer whosemultiple UEs of that NO
LTE LST DRX is enabled,
cycle for this
inter-RAT
whose
indexes
of a short
parameter RFSP
are DRX indexes
iscontained
valid cycle.
ANR.
are
in the If
contained
RFSPinter-RAT inactual
index the ANR
set.
BTS3900, BTS3900 MOD DRX In addition,
regardless
is enabled, the
of
this whether
RFSP
The index
length of set.this timer NO
LTE LST DRX value
DRX isofenabled. If a
parameter
is expressed is valid
in the
LongDrxCycleSpecial
long DRX cycle is
BTS3900, BTS3900 MOD DRX regardless
number of whether
oftoshort DRX
assigned
configured fora UE ANR may NO
LTE LST DRX DRX
cycles. is If enabled.
this If
be less
measurement,
there than
are multiple the it is
parameter
configured
recommended is
value setthat tointer-
1,
this
BTS3900, BTS3900 MOD DRX RAT
the systems,
length of thisand all
timer
because
parameter
of themshort of be
requirethe setimpact
inter-a
to NO
LTE LST DRX is
of one
the SRS DRX
bandwidth
value
RAT equal
ANR to or
cycle.
and
greaterTAIf thanthis parameter
period 256itms
BTS3900, BTS3900 MOD DRX measurements,
is set to 2,by the length is to
specified
ensure
Indicates that the the
the UE can
extended NO
LTE LST DRX recommended
of thisClass
timerIdentifier two this
isobtainthat
ADD EXTENDEDQCI TimeAlignmentTimer
successfully
QoS
parameter be set the
toFor
BTS3900, BTS3900 LST EXTENDEDQCI short
parameter.
CGI
(QCI), ofDRX a
which cycles.
cell.Therefore,
However,
is
the maximum
details, see 3GPP valueTS of YES
LTE MOD EXTENDEDQCI the
if actual
this
required
the long byvalue
parameter
DRX the cycleof
is set
RMV EXTENDEDQCI 36.321
to a large
operator 5.7.
ShortDrxCycleSpecialvalue,
for user the
ADD EXTENDEDQCI configured
Indicates thefor inter-
BTS3900, BTS3900 assigned
delay of
differentiation.
RAT ANR to aservice
obtaining UE may the
MOD EXTENDEDQCI type
Indicates
be lesscorresponding
thanthethe weightto NO
LTE CGI is
measurements.large, and
LST EXTENDEDQCI the
factorextended
Indicates
configured used the inpre-
value. QCI.
the
ADD EXTENDEDQCI therefore
Otherwise, the the system
BTS3900, BTS3900 allocation
calculation weight.
of The
MOD EXTENDEDQCI delay
success increases.
rate for inter- NO
LTE pre-allocation
Indicates the
connection priorities weight
weight
LST EXTENDEDQCI RAT
of a UE
factor ANR
used is the in pre-the
ADD EXTENDEDQCI during uplink
BTS3900, BTS3900 measurements
allocation
calculationweight
scheduling. of may of be
MOD EXTENDEDQCI affected.
services carried by the NO
LTE connection priorities
LST EXTENDEDQCI Indicates
highest-priority the uplink logical
ADD EXTENDEDQCI during downlink
BTS3900, BTS3900 minimum
channel.
scheduling. Ifguaranteed
services
MOD EXTENDEDQCI NO
LTE bit rate by
carried of the highest- non-
LST EXTENDEDQCI Indicates the downlink
ADD EXTENDEDQCI GBR
priority service.
logical
BTS3900, BTS3900 minimum
channels have guaranteed
MOD EXTENDEDQCI NO
LTE bit rate ofpre-allocation
different the non-
LST EXTENDEDQCI
ADD EXTENDEDQCI GBR service.
weights, the UE takes
BTS3900, BTS3900
MOD EXTENDEDQCI the highest
Indicates the pre- priority of NO
LTE Indicates
Indicates the
the group ID
LST EXTENDEDQCI allocation
the logical weight.
channel.
ADD EXTENDEDQCI prioritized
of
Whenthe parameters bit rate of
BTS3900, BTS3900
MOD EXTENDEDQCI The
the
relatedUEresources
logical toscheduler
channel.
the inter-
are
NO
LTE insufficient,
guarantees pre-
prioritized
LST EXTENDEDQCI The
RAT UE scheduler
handover
allocation weights with the
ADD EXTENDEDQCI bit rates ofQCI.
guarantees
extended logical
prioritized
BTS3900, BTS3900 affect
channels the pre-
MOD EXTENDEDQCI bit rates ofin
allocation logical
probabilities NO
LTE descending
LST EXTENDEDQCI channels
of users. The in order pre-
of
ADD EXTENDEDQCI logical
descending channel order priority.
of
BTS3900, BTS3900 allocation probability
MOD EXTENDEDQCI Resources
logical channel are priority. NO
LTE has a positive
LST EXTENDEDQCI allocated
For details, in see 3GPP
ADD EXTENDEDQCI correlation
Indicates
descending thewith ID the ofof an
BTS3900, BTS3900 TS 36.321. order
pre-allocation
LTE
MOD EXTENDEDQCI logical channelweight.
RLC/PDCP parameter priority NO
LST EXTENDEDQCI This
after parameter
group. the prioritized is QCI-bit
Indicates
specific. whether the
ADD EXTENDEDQCI rates of allQCI services are
BTS3900, BTS3900 extended is
MOD
ADD EXTENDEDQCI Indicates NO
LTE specific tothe
guaranteed. free Forpolicy
usersof
LST EXTENDEDQCI
INTERRATPOLICYCF handovers
details, see to3GPP TS
ADD EXTENDEDQCI or paid users.
Indicates whether to
BTS3900, BTS3900 GGROUP GPRS/EDGE.
36.321.
Indicates thecontrol PS_HO:
policy of
MOD
LST EXTENDEDQCI enable
Indicates flow whether PS for NO
LTE handovers
Indicates theto UTRAN.
group ID
LST EXTENDEDQCI
INTERRATPOLICYCF the QCI. to switch
handovers
ADD PS_HO:
of
usedtheto indicates
parameters
enable or
BTS3900, BTS3900 GGROUP
INTERRATPOLICYCF neighboring
whether totheallow PS
related
disable
GPRS/EDGE to
the single inter-
cells radio
are YES
LTE MOD
GGROUP handovers to UTRAN.
RAT
voice
allowed. handover
call continuity
NACC_HO: with a
INTERRATPOLICYCF
ADD
MOD SRVCC: indicates
BTS3900, BTS3900 specific
(SRVCC)
Indicates QCI.handover to
GGROUP
INTERRATPOLICYCF
INTERRATPOLICYCF whether
GERAN towhether
GSM. allow NO
LTE RMV
GGROUP NACC handovers to
GGROUP transfers
If this switch to UTRANis set toin
ADD
INTERRATPOLICYCF
MOD
LST neighboring
SRVCC mode.
BTS3900, BTS3900 INTERRATPOLICYCF
GGROUP On, the UE
GPRS/EDGE can cells are
INTERRATPOLICYCF
INTERRATPOLICYCF REDIRECTION: NO
LTE GGROUP perform
allowed. the
CCO_HO: SRVCC
GGROUP
GGROUP indicates whether
MOD handover
Indicates to the to
whether
BTS3900, BTS3900 LST allow redirection to
INTERRATPOLICYCF GERAN
CCO GSM cell.
handovers to NO
LTE INTERRATPOLICYCF UTRAN.
GGROUP If this switch is set to
neighboring
GGROUP
LST Off, the UE cannot
GPRS/EDGE cells are
INTERRATPOLICYCF perform
allowed. the SRVCC: SRVCC
GGROUP handover
Indicates whether to the
GERAN
SRVCC handovers GSM cell. to
neighboring
GPRS/EDGE cells are
Indicates the switch
Indicates
used to enable the policy or of
handovers to
disable QCI-specific
ADD CDMA2000 HRPD
SRVCC to CDMA2000
INTERRATPOLICYCF networks.
1xRTT.
GGROUP NON_OPT_HO:
ADD If this switch is turned
MOD Indicates whether to
BTS3900, BTS3900 INTERRATPOLICYCF on, UEs can perform
INTERRATPOLICYCF allow non-optimized NO
LTE GGROUP SRVCC to CDMA2000
GGROUP handovers to
ADD
MOD 1xRTT cells.
BTS3900, BTS3900 LST Indicates
neighboring the isindex
INTERRATPOLICYCF
INTERRATPOLICYCF If this switch turned NO
LTE INTERRATPOLICYCF mapped
CDMA2000 to the HRPD MCS
GGROUP
GGROUP off, UEs
Indicates cannot
whether
GGROUP
ADD Indicates
offset
cells.
perform whethertoto
forSRVCC
channel to
MOD
LST allow
Indicatesthe fast
the ANR
index
BTS3900, BTS3900 INTERRATPOLICYCF permit
quality
OPT_HO:
CDMA2000 or forbid
indicators1xRTT the
INTERRATPOLICYCF
INTERRATPOLICYCF under
mapped the QCI.
towhether
the MCS Theto NO
LTE GGROUP inter-RAT
(CQIs)
Indicates
cells. handover
transmitted with
GGROUP
GGROUP function
offset for specified
rank by
MOD under
data
allowon the QCI.
PUSCH. For
optimized
BTS3900, BTS3900 LST this parameter
indications (RIs) is anTS
INTERRATPOLICYCF
INTERRATPOLICYCF details,
handovers
Indicates seetheto3GPP
index NO
LTE extended
transmitted
36.213.
neighboring Some
mapped to the MCSfunction
with data
values and
GGROUP
GGROUP is
on
are reserved.
PUSCH.
reserved,
CDMA2000
offset for The
Forfor
HRPD
BTS3900, BTS3900 LST PUSCHPARAM
MOD current
cells. version
details,
example, see
acknowledgments 3GPP
values does
0 TS
and NO
LTE INTERRATPOLICYCF
LST PUSCHPARAM not support
36.213. Some
1 are reserved
(ACKs) this
transmitted values
in
GGROUP
function.
are
withreserved,
3GPP TS on
data 36.213 for
PUSCH.
BTS3900, BTS3900 MOD PUSCHPARAM
ADD example,
Release 9.values
When
For details, see 3GPP 13,
this NO
LTE LST PUSCHPARAM
RLCPDCPPARAGRO 14, and 15 is
parameter
TS 36.213. are
Someset to a
BTS3900, BTS3900 UP
MOD PUSCHPARAM reserved
reserved
values arein 3GPP
value,
reserved, a UETS
LST 36.213
initiates Release
an RRC 9. NO
LTE LST PUSCHPARAM for example, value 15
RLCPDCPPARAGRO
ADD When
connection
is this parameter
reserved in 3GPP is
Indicates
set to a the ID
reserved of the
BTS3900, BTS3900 UP
RLCPDCPPARAGRO reestablishment
TS 36.213 Release or fails
9.
RLC/PDCP
value, a UE parameter
initiates an YES
LTE MOD
UP to
Whenaccess this the network.
parameter is
group.
RRC connection
RLCPDCPPARAGRO
ADD
MOD set to a reserved
Indicates the length
UE-or fails of
BTS3900, BTS3900 UP
RLCPDCPPARAGRO reestablishment
value, a maximum
UEdiscard
initiates an
RLCPDCPPARAGRO the PDCP
specific NO
LTE RMV
UP to
RRC access the network.
connection
UP timer.
number of
Indicates the RLC RLC ARQ
ADD
RLCPDCPPARAGRO
MOD
LST reestablishment or fails
BTS3900, BTS3900 retransmissions,
transmission
Indicates the mode.
eNodeB-
RLCPDCPPARAGRO
UP
RLCPDCPPARAGRO
RLCPDCPPARAGRO to access the network. NO
LTE namely the
Only themaximum
specific maximum
AM and UM
UP
UP
UP
ADD number
modes
numberare of
of AM PDU
available.
RLC ARQ
MOD
LST
BTS3900, BTS3900 RLCPDCPPARAGRO retransmissions.
retransmissions, When
RLCPDCPPARAGRO
RLCPDCPPARAGRO NO
LTE UP the
namelynumber the of
maximum
UP
UP Indicates the UE-
ADD
MOD retransmissions
number of AMvolume PDU
BTS3900, BTS3900 LST specific data
RLCPDCPPARAGRO
RLCPDCPPARAGRO reaches the valueWhen
retransmissions. of NO
LTE RLCPDCPPARAGRO threshold of PDUs to
UP
UP this
the parameter,
number
Indicates theofeNodeB-RRC
UP
ADD trigger polling. When
MOD
LST connection datare-
retransmissions
specific volume
BTS3900, BTS3900 RLCPDCPPARAGRO the transmitted
establishment isdata
RLCPDCPPARAGRO
RLCPDCPPARAGRO reaches
threshold the value
of PDUs of
to NO
LTE UP volume
initiated. reaches the
UP
UP this
triggerparameter,
polling. When
ADD
MOD value of this
Indicates the UE-
BTS3900, BTS3900 LST eNodeB
the willthe
transmitted release
data
RLCPDCPPARAGRO
RLCPDCPPARAGRO parameter,
specific number Poll
of NO
LTE RLCPDCPPARAGRO the
volumeuser. reaches the
UP
UP flag is set
PDUs in the polling.
to trigger PDU
ADD
MOD value
Indicates
header. of this
the
When the transmitted eNodeB-
BTS3900, BTS3900 LST
RLCPDCPPARAGRO parameter,
specific
number number the Poll
of PDUs of NO
LTE RLCPDCPPARAGRO
UP
UP flag
PDUs
reachesis set
to thein value
trigger the polling.
PDU of
UP
ADD
MOD
LST header.
When the transmitted
this parameter, the
BTS3900, BTS3900 RLCPDCPPARAGRO
RLCPDCPPARAGRO
RLCPDCPPARAGRO number
Poll flag of is PDUs
set in the NO
LTE UP
UP
UP reaches
PDU header.
Indicates the
thevaluelength ofof
ADD
MOD
LST this parameter, the
BTS3900, BTS3900 RLCPDCPPARAGRO the Polling PDU
RLCPDCPPARAGRO
RLCPDCPPARAGRO Poll flag is set intimer the NO
LTE UP retransmission
UP
UP PDU
ADD
MOD for theheader.
Indicates UE. the length of
BTS3900, BTS3900 LST the Polling PDU
RLCPDCPPARAGRO
RLCPDCPPARAGRO
RLCPDCPPARAGRO NO
LTE UP retransmission
Indicates the length timerof
UP
UP
ADD
MOD for
the the eNodeB.timer
UE-specific
BTS3900, BTS3900 LST
RLCPDCPPARAGRO
RLCPDCPPARAGRO
RLCPDCPPARAGRO for prohibiting status NO
LTE UP Indicates the length
UP
UP reporting from the of
ADD
MOD
LST the eNodeB-specific
receiver in AM.
BTS3900, BTS3900 RLCPDCPPARAGRO
RLCPDCPPARAGRO
RLCPDCPPARAGRO timer for prohibiting NO
LTE UP
UP
UP status
Indicates reporting
the length fromof
ADD
MOD
LST the UE-specific
receiver in AM.
BTS3900, BTS3900 RLCPDCPPARAGRO the timer
RLCPDCPPARAGRO
RLCPDCPPARAGRO NO
LTE UP for reordering at the
UP
UP Indicates
MOD receiver inthe AM. length of
BTS3900, BTS3900 LST the eNodeB-specific
RLCPDCPPARAGRO
RLCPDCPPARAGRO NO
LTE timer for reordering at
UP
UP the receiver in AM.
LST
RLCPDCPPARAGRO
UP
ADD
RLCPDCPPARAGRO
UP
ADD Indicates the length of
MOD
BTS3900, BTS3900 RLCPDCPPARAGRO a PDCP sequence
RLCPDCPPARAGRO NO
LTE UP number
Indicatesofthe a UL length DRBof
UP
ADD
MOD in UL
a RLC RLC UM.sequence
BTS3900, BTS3900 LST
RLCPDCPPARAGRO
RLCPDCPPARAGRO
RLCPDCPPARAGRO number in UM. The NO
LTE UP Indicates the length of
UP
UP length is permanently
ADD
MOD
LST a DL RLC
10 bits in AM. sequence
BTS3900, BTS3900 RLCPDCPPARAGRO
RLCPDCPPARAGRO
RLCPDCPPARAGRO number in UM. The NO
LTE UP
UP
UP length
Indicates is permanently
the length of
ADD
MOD
LST 10 bits in AM. timer
BTS3900, BTS3900 RLCPDCPPARAGRO the UE-specific
RLCPDCPPARAGRO
RLCPDCPPARAGRO NO
LTE UP for reordering at the
UP Indicates
UP
ADD
MOD receiver inthe
Indicates theUM. pre-
length of
BTS3900, BTS3900 LST allocation
the eNodeB-specific weight. The
RLCPDCPPARAGRO
RLCPDCPPARAGRO
RLCPDCPPARAGRO pre-allocation weightat NO
LTE UP timer for reordering
UP
UP of a UE
Indicates is the pre-
MOD the receiver in UM.awhether
BTS3900, BTS3900 LST allocation
PDCP status weight report of is
RLCPDCPPARAGRO
RLCPDCPPARAGRO services NO
LTE required carried upon by the
UP
UP Indicates
handover the
highest-priority in AM. uplink
logical
BTS3900, BTS3900 LST
MOD STANDARDQCI minimum
channel. If servicesguaranteed
RLCPDCPPARAGRO NO
LTE LST STANDARDQCI bit rate by
carried of the non-
highest-
UP Indicates
GBR service.
priority the downlink
logical
BTS3900, BTS3900 MOD STANDARDQCI minimum
channels have guaranteed
NO
LTE LST STANDARDQCI bit rate of the non-
different pre-allocation
GBR service.
weights, the UE takes
BTS3900, BTS3900 MOD STANDARDQCI
the highest pre- NO
LTE LST STANDARDQCI
allocation
Indicates the weight.ID of a
BTS3900, BTS3900 MOD STANDARDQCI When
parameter resources group are
Indicates
insufficient, thepre- type of NO
LTE LST STANDARDQCI Indicates
related
Indicates
adaptive the
inter-RAT of
toselection
the priority
Indicates
allocation
the logical the
weightsMIMO
channel.
handover.
prioritized
Indicates
between bit
the rate
ID ofofan
beamforming
BTS3900, BTS3900 MOD STANDARDQCI transmission
affect
The the
UE scheduler pre- mode
the
and
used logical
Indicates
RLC/PDCPMIMO
during thechannel.
for fixed
parameter
a multi-
initial NO
LTE LST STANDARDQCI allocation
guarantees
The UE scheduler probabilities
prioritized
beamforming
group.
antenna eNodeB. or MIMO
network
of
bit users.
ratesare
guarantees
access.
The
of pre- The
logical
prioritized
BTS3900, BTS3900 MOD STANDARDQCI transmission
values
If this parameter mode
described is set
allocation
channels
bit rates probability
ofin logical NO
LTE LST STANDARDQCI configured
as
to follows:
TM2(TM2), for thea multi-
has a
descending
channels positivein orderAof
antenna
NO_ADAPTIVE:
MIMO eNodeB.
transmission This
correlation
logical
descending channel with
order theof
priority.
BTS3900, BTS3900 MOD STANDARDQCI parameter
fixed
mode beamforming
used are isduring only
valid or
pre-allocation
Resources
logical channelweight. priority. NO
LTE LST STANDARDQCI when
MIMO
initial transmission
network access
This
allocated
For parameter
details, in seeThat is
3GPPQCI-
BfMimoAdaptiveSwitch
mode is used.
is
TS
is
TM2.
specific.
Indicates
descending
36.321.
set to whether
order tois,
of
BTS3900, BTS3900 MOD STANDARDQCI transition
If this
Indicates between
parameter
the default is the
set
enable
logical
NO_ADAPTIVE. flow control
channel priority
The for NO
LTE LST STANDARDQCI beamforming
to
Doppler shift and
level.
MOD the
after
values QCI.
the prioritized
are default
described bit
MIMO isoftransmission
ADAPTIVE(ADAPTIVE
This the
BTS3900, BTS3900 ALGODEFAULTPARA rates
as follows: all services are
mode
), the
parameter is
MIMO not supported.
used
LTE MOD
LST guaranteed.
TM2: Transmission
TxD_BF_ADAPTIVE: For when NO
BFMIMOADAPTIVEPA transmission
Doppler
Indicates
details, shift
see the mode
QoSused
3GPP TS
ALGODEFAULTPARA mode
The
used 2 is always
transmission
during initial
BTS3900, BTS3900 RACFG measurement
class
36.321. identifier is not
(QCI).
for
mode UEs.
network
required. changes
access voice is NO
LTE MOD
LST QCI 1Transmission
indicates
TM3:
adaptively
determinedbetween by the
BFMIMOADAPTIVEPA
BFMIMOADAPTIVEPA services.
mode
TM2 3 isTM7 always used
BTS3900, BTS3900 RACFG
RACFG QCI
for 2and
ADAPTIVE_MIMO_TY
UEs.
Indicates indicates
the
orvideo
NO
LTE MOD
LST between
PE
(live and
streaming)TM2 and
MIMOADAPTIVEPAR TM7:
measurement
TM8, Transmission
depending
FIXED_MIMO_TYPE
Indicates the length gap on of
BFMIMOADAPTIVEPA services.
BTS3900, BTS3900 ACFG mode
pattern.
the
settings.
the timer7
protocol is
If
foralways
therelease
periodic used
RACFG QCI 3 indicates real- NO
LTE LST for
The
with UEs.
eNodeB
which
MimoAdaptiveSwitch
transmission UEs defines
of buffer
time
TM8: gaming
measurementTransmission services.
gaps
MIMOADAPTIVEPAR comply.
parameter
status
QCI 4 reports
indicates is set to for
(BSRs).
video
BTS3900, BTS3900 LST
ACFGTYPDRBBSR mode
UEs in8
MIMO_BF_ADAPTIVE
NO_ADAPTIVE,
BSRs are is sent
always
connected used
the
(buffered
for
mode. UEs. Duringstreaming)the YES
LTE MOD TYPDRBBSR :services.
The MIMO
initial transmission
periodically or as
TM4:
triggered Transmission
measurement
mode changes
transmission by gaps,isa
mode
events.
BTS3900, BTS3900 MOD TYPDRBBSR QCI
mode 5 4indicates
is always IMS
UE measures
adaptively
determined
Periodic
signaling.
Indicates the
between theused
the
bylength
transmission of NO
LTE LST TYPDRBBSR for
TM2, UEs.
signal
setting quality
TM3,ofuses
the and of the
TM7,
of
QCI
the BSRs
7on
BSR indicates
(Buffer the timer
voice,
Status
TM9
cells
or w/o
between
FixedMimoMode
specified a PMI:
specific
TM2, Open-
this TM3,
byinteractive
BTS3900, BTS3900 MOD TYPDRBBSR video,
Report)
loop and retransmission
transmission
frequency.
and TM8,
parameter.
gaming depending
If
services. the is NO
LTE LST TYPDRBBSR timer.
mode
There
on the This
9are
protocol timer
is timer
always
two gap used
MimoAdaptiveSwitch
When
QCIs
started
for UEs.
patterns:
the
6,after
8,pattern
and a BSR9release
1 is
and
BTS3900, BTS3900 MOD HOMEASCOMM with which
parameter
expires,
indicate a BSR
video UEs
is set istosent.
services
sent.
TM9
pattern w PMI: Close-
LTE LST HOMEASCOMM comply.
After
and the2.BSR
OL_ADAPTIVE
TCP-based
In patternisor sent, 1, NO
loop
the transmission
gap
OC_ADAPTIVE,
the timer width
is is 6the
restarted. ms
services.
mode
and 9 repetition
is always used
initialtheMIMO
for UEs.
period
transmission is 40 ms. mode In is
pattern
TM3. If the 2, the gap
width is 6 ms and the
MimoAdaptiveSwitch
repetition
parameterperiod is set to is 80
ms. For
CL_ADAPTIVE, thedetails, see
Indicates the upper-
layer filtering
coefficient for RSRP
Indicates
measurements the upper- on E-
layer
UTRAN. filtering
coefficient
A larger value for RSRQof this
Indicates
parameterthe
measurements L3on E-a
indicates
BTS3900, BTS3900 MOD HOMEASCOMM filtering
strongercoefficient
UTRAN. smoothing
used
A largerfor the
value of this NO
LTE LST HOMEASCOMM effect and higher
measurement
parameter
resistance to fast quantity
indicates a
BTS3900, BTS3900 MOD HOMEASCOMM in inter-RAT
stronger
fading, butsmoothing
it may
measurements of NO
LTE LST HOMEASCOMM effect
weaken and thehighertracing
GERAN.
resistance
capability to
towards fast
BTS3900, BTS3900 MOD HOMEASCOMM Indicates
A great but valuethe threshold
of Forthis
fading,
varying signals. it may NO
LTE LST HOMEASCOMM below
Indicates
parameter which the cycle
indicates a
weaken
details,
measurements the
see tracing
3GPP on theTS
during
Indicates
strong
capability which whether
smoothing
towards
36.331.
neighboring
evaluations cells are
BTS3900, BTS3900 MOD HOMEASCOMM measurement
effect
varying and a of
signals. highthe For UE
anti- NO
LTE LST HOMEASCOMM started.
medium
threshold
fast-fading
Indicates If
and the
needs
the signal
high
capability,
cycle TSto be
details,
quality see
of the 3GPP
serving
mobility
set.
but
during
36.331.a low states
which signal in
BTS3900, BTS3900 MOD HOMEASCOMM cell exceeds
RRC_CONNECTED
change
evaluations tracing ofthis
the UE
Indicates whether NO
LTE LST HOMEASCOMM threshold,
mode
capability.
normal are the
For UE
performed.
mobility details,
stateis in It
mobility-based
not
is onerequired
of the to
key cell
perform
BTS3900, BTS3900 MOD HOMEASCOMM see 3GPP
RRC_CONNECTED
handover TS 36.331.
intra-frequency,
parameters
Indicates
mode are the inhandover
performed. inter- It
deciding NO
LTE LST HOMEASCOMM measurement
frequency,
on
numbera UE's or
mobility
threshold inter- used
is one of theneed
parameters key to be
RAT
state.
in the measurements,
parameters If
UE this parameter
medium
in deciding
BTS3900, BTS3900 MOD HOMEASCOMM set.
leading to reduced
is set
mobility
on to state
a UE's
Indicates athe small
mobility value,
handover NO
LTE LST HOMEASCOMM power consumption.
switchings
evaluation.
state. If this
number threshold used among
If the
parameter
BTS3900, BTS3900 MOD HOMEASCOMM mobility
number
is set
in the toUEstates
of
a highhandovers
small mayvalue,
mobility be
frequent
performed and the
during a NO
LTE LST HOMEASCOMM switchings
state evaluation. amongIf the
decision
period
mobilityofstates
number ofprecision
timehandoversmaymay be
BTS3900, BTS3900 MOD HOMEASCOMM be
performed during Ifa this
relatively
specified
frequent by
and low.
the
the
parameter is set tomay
a NO
LTE LST HOMEASCOMM TcrMaxConnMode
Indicates
decision
period of precisionthe
time scaling
large
parameter
factor
specified value,
for the
be relatively switchings
byexceeds
time-to-
low.
the the
If this
BTS3900, BTS3900 MOD HOMEASCOMM among
value
trigger
parameter mobility
ofdefined
this is setfor states
to a
TcrMaxConnMode NO
LTE LST HOMEASCOMM are
largeless
Indicates
parameter,
medium-mobility
value,frequent
the the scaling
UE
switchings and
UEs.isthe
parameter
Indicates theexceeds
filtering
the
factor
For
among
value decision
considered
a for
UE the
in
mobility
of this toprecision
time-to-
be
medium in
states
BTS3900, BTS3900 MOD HOMEASCOMM coefficient
is relatively
trigger for
high. RSCP
LTE LST HOMEASCOMM
medium
are lessdefined
mobility,
parameter, mobility
the
frequentthe for
time-to-
UE state
and
is NO
measurements
high-mobility
and its used
Indicates
trigger
the decision handover-
the UEs.
in on For
upper-
event
precision
considered
UTRAN. to be in
a
is UE
related
layer
evaluation
high in parameters
high
filtering
relatively
mobility mobility,
ishigh.
multiplied
state are
and
BTS3900, BTS3900 MOD HOMEASCOMM A larger value of this
the
by
its time-to-trigger
adjusted.
coefficient
this scaling
handover-relatedfor Ec/No
factor, NO
LTE LST HOMEASCOMM parameter indicates a
used
to in event
measurements
facilitate
parameters are on
triggering
stronger
evaluation
UTRAN.
of smoothing
the handover. is multiplied
BTS3900, BTS3900 MOD HOMEASCOMM adjusted.
effect
by
A this
larger and
scaling
valuehigher factor,
of this NO
LTE LST HOMEASCOMM Indicates the maximum
resistance
to facilitate
Indicates
parameter theto fast
triggering
quantity
indicates
number
Indicates
fading, of
but thecells number
it may to bea
BTS3900, BTS3900 MOD HOMEASCOMM of
to the
be
stronger
included handover.
included
smoothing
in the in the
of periodical
weaken
measurements the tracing for NO
LTE LST HOMEASCOMM effect
measurementand higher report
MOD measurement
capability
handovers
resistance towards
to
to reports
UTRAN.
fast
after
to
varying an
sent inter-RAT
beparameter after
signals. an
For
BTS3900, BTS3900 INTERRATHOCOMM This
fading, but it may is
handover
inter-RAT
details, see event
handover
3GPP or TSa NO
LTE LST dedicated
weaken the to UTRAN
tracing
MOD periodic
event
36.331. is inter-RAT It is
triggered.
INTERRATHOCOMM FDD.
capability The towards
RSCP
BTS3900, BTS3900 INTERRATHOCOMM measurement
used toareprevent forthe ANR
values
varying
purposes signals.
isrelatively For
triggered. NO
LTE LST impact
stable,
details, of
while
see see the3GPP
3GPP Ec/No
TS
MOD
INTERRATHOCOMM For details,
measurement report
values
36.331.
TS may
36.331. vary with
BTS3900, BTS3900 INTERRATHOCOMM loss and internal
Indicates theload. The
the network NO
LTE LST Indicates
processing
measurement the interval
failure
quantity on
MOD value BOTH applies
INTERRATHOCOMM at
the which
handover.
required periodic
for the For inter-
BTS3900, BTS3900 INTERRATHOCOMM only to UEs complying
measurement
details,
RAT
with 3GPP seeRelease
handover 3GPP reports
to TS NO
LTE LST are
36.331.sentUEs to the
MOD CDMA2000
10. For 1xRTT.
complying
INTERRATHOCOMM eNodeB after the3GPP
BTS3900, BTS3900 INTERRATHOCOMM For
with details,
3GPP see
Release 8
Indicates
event
TS for
36.331. the
inter-RAT NO
LTE LST or 9,
Indicatesthe value
the BOTH
MOD
measurement
handover
takes to interval
theperiodic
same
quantity
effect
INTERRATHOCOMM at which
required for the inter-
BTS3900, BTS3900 INTERRATHOCOMM CDMA2000
as the value 1xRTT
RSCP. is
measurement
RAT handover to
triggered. reports NO
LTE LST For
are details,
sent to the see 3GPP
CDMA2000
For details, HRPD.
MOD
INTERRATHOCOMM TS
eNodeB
For 23.003.
Indicates
details, thesee
after see type 3GPP
the3GPP of
BTS3900, BTS3900 INTERRATHOCOMM TS
the 36.331.
inter-RAT
event
TS 36.331. for inter-RAT NO
LTE LST handover
MOD handover event. to The
INTERRATHOCOMM event type can be B1
BTS3900, BTS3900 INTERRATHOCOMM CDMA2000 HRPD is
or B2. This parameter
triggered. NO
LTE LST
applies
For details, onlysee to 3GPP
INTERRATHOCOMM
coverage-based
TS 36.331.
handovers. For details,
see 3GPP TS 36.331.
Indicates the maximum
number of UTRAN cell
MOD
system information
BTS3900, BTS3900 INTERRATHOCOMM Indicates
messagesthe that maximum
can be NO
LTE LST number of GERAN
MOD transmitted during acell
INTERRATHOCOMM system information
BTS3900, BTS3900 INTERRATHOCOMM flash redirection
Indicates
messages
procedure. the that maximum
quantity
can be NO
LTE LST number of GERAN
MOD
to be included
transmitted
Indicates during
the maximum
in the acell
INTERRATHOCOMM system
measurement information report
BTS3900, BTS3900 INTERRATHOCOMM flash
number redirection
ofthe cells to be
Indicates
messages
for that
the intra-frequency
procedure. maximum
can be NO
LTE LST included
number
Indicates ofin
the the
UTRAN number cell
MOD transmitted
handover
Indicates during
event.
the quantity The a
INTERRATHOCOMM measurement
BTS3900, BTS3900 INTERRATHOCOMM
system
of
CSFBperiodical
quantity
used can bereport
information
toemergency
evaluate RSRP,
the
after
messagesan
measurement
redirection
RSRQ, intra-RAT
that can be
reports
procedure.
or condition
both. NO
LTE LST triggering
inter-frequency or for
MOD transmitted
to
The
the be sent after
measured
intra-frequency during an a
RSRP
INTERRATHOCOMM intra-RAT intra-
BTS3900, BTS3900 INTRARATHOCOMM CSFB
event
values
handover emergency
for
arethe intra-
stable,
event. The or
frequency
redirection
inter-frequency
varying little procedure.
with the NO
LTE LST quantity can beevent RSRP
MOD measurement
handover
load, and the within the E-
therefore
INTRARATHOCOMM or RSRQ.
Indicates
BTS3900, BTS3900 INTRARATHOCOMM for
UTRAN
therehandover is triggered.
is little purposes
signal
The
or measured
measurement
a used
periodic RSRP
quantity
intra-RAT NO
LTE LST It is
fluctuation.
values
included are tostable,
in prevent
The
the
MOD
INTRARATHOCOMM measurement
Indicates
the impact
measured the ofwith
RSRQ time-to-
for ANR
triggering
varying
measurement
purposes
trigger
quantity little
for foris
event report
triggered.
frequency- B1the
BTS3900, BTS3900 INTRARATHOCOMM measurement
values vary with report
the
load,
for
For
that and
event
details,
is used
priority-based therefore
A4. see The
inlikely
CS 3GPP
inter- NO
LTE LST loss
load and
and internal
are to
MOD there
quantity
Indicates
TS
fallback is little
36.331.
frequency can
to the signal
be
UTRAN. RSRP,
time-to-
INTRARATHOCOMM processing
reflect the failure
signal on
BTS3900, BTS3900 INTRARATHOCOMM fluctuation.
RSRQ,
trigger
When
measurement CSor The
both.
for event
fallback B1to
events
the handover.
quality of the For
LTE LST measured
The
that
UTRAN
A1 andmeasured
is usedis
A2. RSRQincellCS
applicable,
The RSRP in NO
MOD details,
real
values time.
Indicates see
vary
are Even
the 3GPP
with when
time-to-
stable, the TS
INTRARATHOCOMM fallback
this parameter
quantity to
can GERAN.
be is set
either
BTS3900, BTS3900 INTRARATHOCOMM 36.331.
this
load
triggerparameter
slightlyand for are
varyingevent is
likely set
B1,
with to
tothe
When
for
RSRP UEs CS
or and fallback
RSRQ. used in
The to NO
LTE LST BOTH,
reflect
which
load,
GERAN
Indicates is the
the
andistheused eNodeB
signal
therefore in
applicable, CS
triggering
the evaluation
measured
triggers ato RSRP
handover of
MOD
INTRARATHOCOMM quality
fallback
this
quantity
whether oflittle
thereparameter
isare the
for
to CDMA2000.
cell
signalis set
frequency-
trigger in
values
based on the stable,setting
BTS3900, BTS3900 INTRARATHOCOMM real
When time.
fluctuation.
for UEs
priority-
event
varying CS
B1. and
littlefallback
WhenThe
used
load-the
with into of NO
LTE LST the
For
CDMA2000
details,
measured
the
based evaluation see
RSRQis the
inter-frequency of3GPP
MOD detecting
load, and that
IntraFreqHoA3TrigQuatherefore
INTRARATHOCOMM TS
applicable,
values36.331.
Indicates
whether
handover
signal varytothe this
withEc/N0
trigger
event A4the
BTS3900, BTS3900 INTRARATHOCOMM there
n isquality
little signal
parameter.The in at value
parameter
load
threshold
event
and
least andB1. are
for
PCell-camping-
one is
When
UTRAN The for
set
event
likely to
B1, NO
LTE LST fluctuation.
of
UEs this
reflect
which and
detecting parameter
is
the
priority-based used
used signal
that inin
the CS
inter- iscell
the
INTRARATHOCOMM Indicates
meets
measured
Indicates the the
theentering
RSRQ RSCP
local ID
LST CSFALLBACKHO also
quality
fallback
signal used
evaluation
frequency oftothe
quality asofwith
UTRAN.the
handoverwhether
cell
in at in
BTS3900, BTS3900 threshold
condition,
values
of the vary
cell. for
the
It event
UE
uniquely the B1,
does
MOD quantity
to
real
Whentrigger
least
event time.
one to
CSused
A4 event
For be
fallback
GERAN
in included
B1.
details,
carrier to
cell YES
LTE which
not
load send
and
identifies is a
are
a cell inwithin
likely CS to
CSFALLBACKHO in
When
see the
UTRAN
meets 3GPP
aggregation
fallback
measurement
reflect
measurement
detecting
the
the is signal
to required,
TS
entering
(CA)
UTRAN. that toa
36.331.
report
BS.
report between
BTS3900, BTS3900
MOD the
this signal
parameter
condition,
scenarios.
When
the eNodeB
quality CS
of quality
thecell
fallback
the UEisA3- in
set toat
does
in
CSFALLBACKHO related
least
for
not UEs one
send inter-frequency
andCDMA2000used in NO
LTE
LST CSFALLBACKHO
UTRAN
real time.isaFor
immediately.
measurement
applicable,
Instead,
details,
reports.
cell
the
this
the
see meets
evaluation
measurement
parameter
UE
3GPP sends the
TS entering
about
areportset to
isreport
36.331.
MOD For details,
condition,
whether to the see
triggerUE 3GPP does
BTS3900, BTS3900 the
for
only eNodeB
UEswhen andthe used signal in
CSFALLBACKHO TS
not
event 36.331.
send B1. a This NO
LTE immediately.
the evaluation
quality continuously Instead,
about
LST CSFALLBACKHO measurement
MOD parameter
the UEthe
whether
meets sends
toentering
triggerareport
indicates reportto
BTS3900, BTS3900 the
only
event eNodeB
Ec/N0
when
condition B1. during requirement
the signal
This the
CSFALLBACKHO NO
LTE immediately.
for the UTRAN
quality
parameter continuously
time-to-trigger. Instead,
indicates cells to
This
LST CSFALLBACKHO Indicates
Indicates the
the reference
MOD the
be
meets
the UE
included
RSCP
parameter sends
the inRSSI
entering athe
requirement
helps report
BTS3900, BTS3900 signal
threshold
only whenreceivedforthe event power
signal B1
CSFALLBACKHO measurement
condition
for the UTRAN
decreasethreshold
(RSRP) during
the number report.
the
cells fortoA NO
LTE that
quality
UE is
sends used
continuously
time-to-trigger. in
a inpilot CSThis
LST CSFALLBACKHO Indicates
be
of included
occasionally
event A1 the
associated the
MOD fallback
meets
measurement
parameter
strength
measurement
triggered the to GERAN.
entering
helps
threshold
event report
report. AA
BTS3900, BTS3900 with
UE CSFB-triggered
sends
condition a
during the
CSFALLBACKHO related
decrease
UE sends
reports,
adaptive tothe event
the
a average
blind B1
number
B1, to NO
LTE measurement
time-to-trigger. report
This
LST CSFALLBACKHO the
of eNodeB
occasionally
which
measurement
number
handovers. is of used whenin CSthe
report
handovers,
This
MOD related
parameter
Ec/N0
triggered
fallback
related in
and the numberto
totoatevent
helps
event least
CDMA2000.
event B1
B1 one to
to
BTS3900, BTS3900
CSFALLBACKHO parameter
the
reduceeNodeB the is set of
when
number for thea
of NO
LTE UTRAN
reports,
A
the UE
wrong
UE sends
eNodeB
as cell
the
handovers,
a exceeds
average
triggeringa
when the
and
LST CSFALLBACKHO RSSI
this
number ininat
occasionally
thresholdofat least one
triggered
and
MOD
measurement
RSCP
thus helps
condition
GERAN
event ofhandovers,
cell
reports,
toleast
event report
prevent
exceeds
the
oneA1
BTS3900, BTS3900 other
and
related
UTRAN thetriggering
unnecessary
measurement number
tocellevent exceeds of to
B1
related
CSFALLBACKHO this
averagethreshold
conditions
wrong number
handovers, are and
met. ofand For NO
LTE the
this
to aeNodeB
threshold
handovers.
CSFB-triggered when
For and the
details,
LST CSFALLBACKHO other
handovers,
a cell
thus triggering
with
helps and
large
to the
signal
prevent
MOD pilot
other
adaptivestrength
triggering
see 3GPPblind in
TS 36.331. at
BTS3900, BTS3900 Indicates
conditions
number
fading
unnecessary
least one
conditions ofthe
variance, aretimer
are
wrong
CDMA2000 met.
met.set For For
CSFALLBACKHO handover.
governing
details,
handovers, see This
the 3GPP
and period
hence TS in NO
LTE this
cell parameter
handovers.
exceeds
details, see Forthis
3GPP to a
details,
TS
LST CSFALLBACKHO parameter
which
36.331.
helps only
to specifies
preventCSFB can
MOD large
see
thresholdvalue
3GPP
RSRPand
36.331.
theperformed TSto
thresholdprevent
36.331.
other
BTS3900, BTS3900 be
unnecessary
triggering conditions . After of
CSFALLBACKHO the serving cell above NO
LTE the
are timer
handovers.
met. expires,
For For a
details, the
details,
cell
LST CSFALLBACKHO which
Indicates a CSFB-
the local
eNodeB
see
with
see 3GPP performs
smalladaptive
3GPP TS
signal 36.331.
TSuniquely aID
fading
36.331.
BTS3900, BTS3900 LST CELLACBAR triggered
of the
blind cell.
redirection It for the
variance,
blind handover set this is YES
LTE MOD CELLACBAR identifies
UE.
parameter a to cell a within
small a
triggered.
BS. If the RSRP
value
value to ensure timely
measured by a
handovers.
UE exceedsFor thisdetails,
see 3GPP the
threshold, TS UE 36.331.
submits a
measurement report
related to event A1.
10 can initiate
emergency
Indicates thecalls. access
If this parameter
probability factor is forset
to BOOLEAN_TRUE,
mobile-originated calls.
UEs
A of access classes
mobile-originated
0 to is
call 9 granted
or those access without
IMSIs
if cannot number
the random initiate
Indicates
generatedwhether
emergency by calls.
the If tothis
UE is
BTS3900, BTS3900 MOD CELLACBAR
configure
parameter the
is access
set to NO
LTE LST CELLACBAR less than this access
barring
BOOLEAN_FALSE,
probability information.
factor;
BTS3900, BTS3900 MOD CELLACBAR UEs of access
otherwise, the accessclasses
NO
LTE LST CELLACBAR 0 to 9 and
request those
is rejected.
Indicates
without
According whether
IMSIsto 3GPP can toTS
BTS3900, BTS3900 MOD CELLACBAR configure
initiate the
emergency
36.331, if any of the access
Indicates the mobile- NO
LTE LST CELLACBAR barring
calls. information
parameters for
originated
mobile-originated
A UE in access
AC11BarforCall, call barring calls.
BTS3900, BTS3900 MOD CELLACBAR status
classesof11 access
to 15 class
AC12BarforCall,
Indicates the mobile- NO
LTE LST CELLACBAR 11,
cannot indicating
initiate whether
AC13BarforCall,
Indicates
originated the
call average
barring
UEs
emergencyof access
AC14BarforCall, calls class
only
and
BTS3900, BTS3900 MOD CELLACBAR access
status
11 can ofbarring
access
initiate class
mobile-
when its
AC15BarforCall
Indicates access
the class
is
mobile- set NO
LTE LST CELLACBAR duration
12, indicating
originated for mobile-
calls. whether
and
to access
BOOLEAN_TRUE,
originated call class
calls.barring 10
UEs
If
are this ofparameter
both access
barred. class
isits
If set
BTS3900, BTS3900 MOD CELLACBAR the
status
12 eNodeB
can of access
initiate sends class
mobile-
to
UEs BOOLEAN_TRUE,
access
Indicates class
P00 as thethe or access
mobile- NO
LTE LST CELLACBAR 13, indicating
originated whether
UEs
class
access
originated
UEs of iscalls.
of10access
probability
access call class
not barring
barred,
class
If
11 this parameter
cannot
emergency initiate
calls is set
BTS3900, BTS3900 MOD CELLACBAR factor
status
13 can for
of mobile-
access
initiate class
mobile-
to BOOLEAN_TRUE,
Indicates
mobile-originated the access NO
LTE LST CELLACBAR initiated
Indicates
originated
14, by
indicating
originated
UEs of
the
access
themobile-
calls
calls. in calls.
UE
whether
class
are
the
probability
If this
granted
originated parameter factor
access.
call forset
is
barring
system
UEs
If
12 this of information
access
parameter
cannot class
initiateclass is set
BTS3900, BTS3900 MOD CELLACBAR signaling.
to BOOLEAN_FALSE,
status Signaling
ofinitiate
access
block
14
to can type
BOOLEAN_TRUE,
mobile-originated 2 (SIB2),mobile- calls. NO
LTE LST CELLACBAR from
UEs
15, a
of UE
access
indicating is granted
class
whether
regardless
originated
UEs
If this ofparameter
access of the
calls. class
is set
access
11
UEs can if the
initiate
ofparameter
access random
mobile-
actual
If
13
to this
cannotsetting
BOOLEAN_FALSE, initiateofclass
the
is byset
BTS3900, BTS3900 MOD CELLACBAR number
originated
15 can generated
calls.
initiate mobile-
AcBarringFactorForCal
to BOOLEAN_TRUE,
mobile-originated
UEs of access class calls. NO
LTE LST CELLACBAR the UE is less than this
loriginated
If
12parameter.
UEsthis
canofparameter
access calls.
initiate class
is set
mobile-
access
If this probability
parameter is set
BTS3900, BTS3900 MOD CELLACBAR 14
to cannot
BOOLEAN_FALSE,
originated
factor; initiate the
calls.
otherwise,
to BOOLEAN_TRUE,
mobile-originated NO
LTE LST CELLACBAR UEs
access
UEs
of access
requestclass
ofparameter
access is calls.
class
If
13 this
Indicates
can
rejected. whether
initiate istoset
mobile-
BTS3900, BTS3900 MOD CELLACBAR 15
to cannotAccording
BOOLEAN_FALSE,
configure
originated initiate
the
calls. access
to
3GPP TS
mobile-originated 36.331, if
calls. NO
LTE LST CELLACBAR UEs
barring
any ofthe
Indicates
of access
the
information
parameters class
signaling for
If
14 this
can
barring
signaling.parameter
initiate
status is set
mobile-
of
AC11BarForSig,
to BOOLEAN_FALSE,
BTS3900, BTS3900 MOD CELLACBAR originated
access class calls. 11,
AC12BarForSig,
UEs of access
Indicates the class
signaling NO
LTE LST CELLACBAR indicating whether UEs
AC13BarForSig,
15 can
barring initiate
status mobile-
of
of access
Indicates
AC14BarForSig, class
the 11
average and can
BTS3900, BTS3900 MOD CELLACBAR originated
access
initiate class calls.
signaling 12,
access
AC15BarForSig
Indicates barring
the is set
signaling NO
LTE LST CELLACBAR indicating
access. whether UEs
duration
to for
BOOLEAN_TRUE,
barring status signaling.
of
If access
this classof12
parameter is can
set
BTS3900, BTS3900 MOD CELLACBAR the
accesseNodeB
initiate class
signaling sends
13,
to
UEs BOOLEAN_TRUE,
P00 as
Indicates the the
signaling NO
LTE LST CELLACBAR indicating
access. whether UEs
UEs
access
barring of access
probability
status ofclass
of
If
11 access
this class
parameter
cannot initiateis in13 can
set
BTS3900, BTS3900 MOD CELLACBAR factor
access
initiate for signaling
class
signaling 14,
to BOOLEAN_TRUE,
signaling
Indicates access.
the public If NO
LTE LST CELLACBAR the system
Indicates
indicating
access. the
whether
whether signaling
information the
UEs
UEs
this
land
barring of access
parameter
mobile
status class
is
network
of set to
block
cell
of
If
12 is
this type
accessreserved 2
class
parameter
cannot (SIB2),
initiate for
14is can
set
BTS3900, BTS3900 MOD CELLACBAR BOOLEAN_FALSE,
(PLMN)
access
regardless
future
initiate broadcast
class
extension.
signaling 15,
of the IfIf the
to
modeBOOLEAN_TRUE,
signaling
UEs of access.
ofreserved,
access
the cell.classIf UEs NO
LTE LST CELLACBAR indicating
actual
cell is
access. settingwhether ofis the
UEs
this
11 can
certain of access
parameter
initiate
cells on class
the setlive
to
of
If
13 access
this a class
AcBarringFactorForSig
whether parameter
cannot UE
initiate can 15is can
set
BTS3900, BTS3900 MOD CELLACBAR BOOLEAN_FALSE,
signaling
network
initiate access.
are
signaling in RAN
parameter.
access
to
signaling
UEs the
BOOLEAN_TRUE,
of access cell class
access. If NO
LTE LST CELLACBAR sharing
access. with common
depends
UEs
this
12 of
parameter
can on
access
initiate the class
is set to
carriers
Indicates
If this
access
14 mode
whether
parameter
cannot class oforthe
initiate inthe
is set
UE
BTS3900, BTS3900 MOD CELLACBAR BOOLEAN_FALSE,
signaling
hybrid
cell is RAN
barred.access.sharing
IfPLMN.
the
LTE LST CELLACBAR
to
and BOOLEAN_TRUE,
its
signaling
UEs serving
ofand access.
access class If cell NO
mode
is
UEs barred,
Details
this of access
are
parameter at
the least
UE
describedclass
is one
set to
13
of can initiate
these
cannot campcells uses
on the the
BTS3900, BTS3900 MOD CELLACCESS Indicates
15
as cannot
follows:
BOOLEAN_FALSE,
signaling whether
initiate
(1)
access. A UE the of
round
serving
cell
UEscan ofrobin
signaling
access cell.
initiate
access.
class
access mode,
Duringthe
11class orIf 15cell NO
LTE LST CELLACCESS NBSLTEPLMNRoundS
reselection,
intra-frequency
this
treats parameter
14 canthe the
cell as a to
initiate cell
is set
BTS3900, BTS3900 MOD CELLACCESS witch
serving under
reselection
BOOLEAN_FALSE,
candidate cell
signaling access. the
is
ifwhen
the not UE theis
RanSharingAnrSwitch
selected
cell
UEsisofbarred. as
access a class NO
LTE LST CELLACCESS served by its home
parameter
candidate
NOT_ALLOWED
15 can (HPLMN)
PLMN initiatemust be
cell. or
BTS3900, BTS3900 MOD CELLACCESS selected
means thatfor
signaling access.
equivalent eNodeBs
the
home UE
whose cells arethe (2) NO
LTE LST CELLACCESS cannot initiate
PLMN (EHPLMN);
configured
intra-frequency
A UE of access cell as class
BTS3900, BTS3900 MOD CELLACCESS neighboring
reselection,
11 or 15 treats cells
and thefor cell NO
LTE LST CELLACCESS the
as alocal
ALLOWED barred cell. means
cell if it that is
Otherwise,
the
not UEservedcanby the localthe
initiate
its
eNodeB
intra-frequency
HPLMN or may EHPLMN; cell
experience
(3) A UE of failures
reselection. an access in
handing over
class within the two UEs from
the
rangeslocalofcell 0-9toand an 12-
ANR-established
14 treats the cell as a
neighboring
barred cell. cell that is
resource
OR_OP, the blocks cell (RBs)
is
occupied
reserved for
Indicates by operator
the the
operator
use. UEson
percentage of of the
AC11 or
physical
AC15 in their
resource uplink
blocks shared
HPLMN (RBs)
channel
or EHPLMN
occupied by the (PUSCH) can
when
consider
operator radio thisaccess
on thecell as a
network
candidate
physical (RAN) cell for
downlink sharing
cell
BTS3900, BTS3900 MOD CELLACCESS Indicates
is enabled
selection
shared the
or
channel on changing
the NO
LTE LST CELLACCESS period
eNodeB
reselection.
(PDSCH) ofand cell
when UEs PLMN.
the cell-
of
RAN
ADD CELLOP level
AC11 RAN
or AC15
sharing is enabled on sharing outside
BTS3900, BTS3900 switch is turned
LTE
MOD CELLOP their
the eNodeBHPLMN/EHPLMN andon. theIf NO
LST CELLOP the
and data
UEs
cell-level
Indicates the volume
of
RAN is
sharing
ADD CELLOP sufficient,
AC0-9/AC12-14
switch
hysteresis the
is turned for cell on. If
BTS3900, BTS3900
MOD CELLOP percentage
consider
the data volume
reselection this ofcell
when RBs isas a NO
LTE
LST CELLOP occupied
barred
sufficient,
RSRP cellby
values the each
during are used cell
ADD CELLOP operator
selection will
or reach the
BTS3900, BTS3900 percentage
in the evaluation. of RBsThis
MOD CELLOP preset
reselection. value. NO
LTE occupied
parameter must be set by each
LST CELLOP Modifications
Indicates
If this parameter the on is
local this ID
set
operator
Indicates
based onwill thereach
the extra
slow the
BTS3900, BTS3900 LST CELLRESEL parameter
of
to the
preset
duration
fading cell. requiredthe
value. affect
It
characteristic uniquely in of
percentage
Indicates ofduration
RBs YES
LTE MOD CELLRESEL identifies
CELL_NOT_RESERV
Modifications
the evaluation
area covered athe cell on withinby a
this
before
occupied
in
BS. which
ED_FOR_OP,
parameter
the UE
cell.can the
The by operators
mobility
affect
enter the
greater the
thecell
BTS3900, BTS3900 MOD CELLRESEL on
status
is the
not
percentage PUSCH.
of
reserved
normal-mobility the of UE This
for
RBs is
the slow fading state. NO
LTE LST CELLRESEL parameter
evaluated.
operator
Indicates
occupied
This parameter use. takes
This
whether
by operators
caneffect
Alllarger
UEs to
variance
Indicates is,
the the threshold
only
parameter
canthe
set
on
prevent
the thein
consider
value RAN is
parameters
PDSCH.
UEs of sharing
one
thisThis
from
this of
cell
BTS3900, BTS3900 MOD CELLRESEL of
with
the the number
common of cellin
carriers
as akey
related
frequently
parameter parameters
candidate
to speed-
takes
switching
must celleffect
be for
set NO
LTE LST CELLRESEL reselections,
mode
deciding or in
on which
hybrid
the UE RAN is
cell
only
from
to. A selection
dependent in
the
largerRANhigh- cell
valueor
sharing
or of
used
sharing
mobility. for a
mode UE
A smaller to
with enter
BTS3900, BTS3900 MOD CELLRESEL reselection.
with common
medium-mobility
the medium
the hysteresis carriers
state
results
mobility
more
value
mode
to
in the
a than
of
largeror this
in one
hybrid
normal-mobility
boundary CellOp
parameter RAN of NO
LTE LST CELLRESEL state.
MO
Indicates
being Thisthe parameter
configured.
threshold
may
sharing
state,
the lead
servingand mode tois more
one
cell with
and of the
a
is
of one
the of switching
number the key of
BTS3900, BTS3900 MOD CELLRESEL frequent
more
key
higher than
parameters
parameters one
probability inwhich incell
CellOp of
reselections,
among
MO being mobilityconfigured. status is NO
LTE LST CELLRESEL deciding
cell reselection
determining on the UE
to
theto enter
used
and
mobility.
neighboring for
lower a UE
decision
A larger cells. value
mobility
the high
accuracy. state
mobility
A larger of the state.
BTS3900, BTS3900 MOD CELLRESEL Indicates
of this the
parameter leads
UE.
This
value During
parameter
of this the UE
is one
parameter NO
LTE LST CELLRESEL measurement
to a lower probability
mobility
of the
leads key
to evaluation,
the parameters
opposite if
triggering
of
the transition
number threshold
from
of cell thefor
BTS3900, BTS3900 MOD CELLRESEL Indicates
in determining
effect.
reselection the scaling
the
toisinter-
high-
reselections
factor or medium-
(orstate known greater
as NO
LTE LST CELLRESEL mobility
frequency
mobility or of
to the
inter-RAT
than
additional
UE. thisstate
During parameter
hysteresis)
the UE
the
cells.
Indicates
value Ifand
normal-mobility thethe iscell state
scaling
less than
BTS3900, BTS3900 MOD CELLRESEL applied
Indicates
mobility
reselection to Qhyst
whether
evaluation,
priority for to
ofif a
but
factor
or higher
equal (or to decision
known
the as NO
LTE LST CELLRESEL medium-mobility
set
the the
number
frequency measurement of
orsmaller
RATcell UEs.is
accuracy.
Indicates
additional
NCellChangeHigh
For details, A
the threshold
hysteresis)
see 3GPP
triggering
reselections
higher
value of than
this threshold
is
that greater
of
parameter thefor
BTS3900, BTS3900 MOD CELLRESEL used
applied
parameter
TS in
36.304
reselection
than this the
to evaluation
Qhyst
value,
and
to
parameter for
3GPP
inter- the
serving
leads
of tofrequency,
reselection thethe opposite
to a cell the NO
LTE LST CELLRESEL high-mobility
UE
TS
value, enters
36.331.
frequency the UE orstartUEs.
medium
inter-RAT
enters For
UEs
effect.
on
details,
mobility always
ahighlower see
state. priority
3GPP inter-
E-
TS
cells.
the
frequency If this orparameter
mobility inter-RATstate.
BTS3900, BTS3900 MOD CELLRESEL UTRAN
36.304 frequency
and 3GPP or
TS
is set to NOT_CFG,
measurements. If the NO
LTE LST CELLRESEL on an
36.331. inter-RAT
the
cell UE continuously
reselection
Indicates the cell priority
frequency.
measures Cell
intra-
BTS3900, BTS3900 MOD CELLRESEL of a frequency
reselection
reselection priorityis lower
ofon
LTE LST CELLRESEL frequency
than
the or
serving equal orto a cell
inter-RAT
to
frequency. that of
NO
a lower
cells, priority
irrespective E- of
the
0
UTRAN serving
indicates
Indicates frequency
the frequency
the lowest
minimum orthe
BTS3900, BTS3900 MOD CELLRESEL the
or signal
ifan the cell quality ofof
LTE LST CELLRESEL
priority.
on
required
serving RX reselection
The
inter-RAT
cell.
value
level used NO
priority
this parameter
frequency of an
in intra-frequency RAT must
is performed is be
E-
lower
determined than
if no cell cell that
together
on the serving of the
BTS3900, BTS3900 MOD CELLRESEL UTRAN
serving
with
frequencythe frequency,
reselection, priorities
orwhichon aoftothe NO
LTE LST CELLRESEL Indicates
UEs start whether
inter-
other
higher
corresponds
Indicates frequencies
priority
the to E-the IE
maximum
configure
frequency
during the the
or
networkinter-RAT
BTS3900, BTS3900 MOD CELLRESEL UTRAN
q-RxLevMin
power thatfrequency
the in SIB3.
UE
LTE LST CELLRESEL
maximum
measurements
planning.
fulfills
ThisUE criteria
value
TX power
Frequencies
1
is included onlycan
for
of NO
apply
the
when to
the intransmission
the
value intra-of Cell
used
in the cellfor
inter-frequency different
reselection
intra-frequency and
frequency
selection
RATs must RX neighboring
be levelin the
BTS3900, BTS3900 MOD CELLRESEL inter-RAT
criteria
neighboring and reselections.
used
cell.
cell.
value
assigned If (dB)
thedifferent
value
is lower ofIt cell
is
this NO
LTE LST CELLRESEL For details,
evaluation
used in cell ofsee cell 3GPP
reselection
parameter
than
reselectionor equal ispriorities.
not
to the
TS 36.304.
reselection.
criteria
Indicates
specified, tothis theFor
calculate
the the
BTS3900, BTS3900 MOD CELLRESEL value of
details, seepower 3GPP TSIf
compensated
measurement
maximum
parameter. power.is NO
LTE LST CELLRESEL Indicates
36.304.
the value
triggering
subject towhether
of
thethis
threshold UE tofor
set the
parameter measurement
capability. istonot
reselection intra-
BTS3900, BTS3900 MOD CELLRESEL
triggering
frequency threshold
specified, the
cells. for NO
LTE LST CELLRESEL
reselection
maximum
The UEs start to intra-
power intra-is
BTS3900, BTS3900 MOD CELLRESEL frequency
subject to the
frequency cells. UE
capability. For details, NO
LTE LST CELLRESEL measurements only if
see 3GPPofTS
the value Cell 36.304.
selection RX level
value (dB) is lower
than or equal to the
value of this
parameter.
Indicates the
measurement
bandwidth on the
Indicates
serving frequency the on
evaluation
Indicates whether to aIt
which the period
UE camps. for
BTS3900, BTS3900 MOD CELLRESEL UE
is to determine
setused
the in intra-
measurement NO
LTE LST CELLRESEL whether
frequency
Indicates totheperform cell
bandwidth.
reselections
measurements
information related to afornew cell
to
BTS3900, BTS3900 MOD CELLRESEL E-UTRAN cell. Ifthose
the
reselection
MBSFN and and TDD NO
LTE LST CELLRESEL signal
by UEsquality
UL/DL in
configurationsof a new
E-UTRAN
RRC_CONNECTED
of intra-frequencycell is better
BTS3900, BTS3900 MOD CELLRESEL
than
Indicatesthat
mode. This
neighboring of
the the serving
scaling
parameter
cells
whether ofto NO
LTE LST CELLRESEL
cell
factor
is
the within
applied
optional;
serving
set the the
scaling if period
to
cell. not
it is
BTS3900, BTS3900 MOD CELLRESEL specified
TReselEutra
set, by for
the downlink
BitString00:
parameters this
forspeed-
Indicates
parameter
medium-mobility
bandwidth
that some and
of the
neighboring a UEs.
UE NO
LTE LST CELLRESEL dependent
Indicates the scalingcell
camps
The
serving
cells have
reselection
factor on
actual
applied the
celltheduration
is used
within serving
same
to E-by of
BTS3900, BTS3900 MOD CELLRESEL cell for more
reselection
default.
MBSFN
UTRAN.
TReselEutran subframe than
forfor 1s,
high-
Indicates
the UE initiateswhether cell all NO
LTE LST CELLRESEL medium-mobility
configuration
mobility
the UEs. as
intra-frequency The UEs
the
reselections
to E-UTRAN
serving
actual cell. cells
duration to
is theequal
of are new
cell
BTS3900, BTS3900 MOD CELLRESEL neighboring
E-UTRAN cell.
to the product
BitString01:
reselection with
configured of
Indicates
of high- at least NO
LTE LST CELLRESEL TReselEutra
that none of the and
mobility
two antenna UEs to
ports. E-
TReselEutranSfMediu
neighboring
UTRAN is equal
Set this parameter cellstoisto
BTS3900, BTS3900 MOD CELLRESEL m.
configured
TReselEutran
BOOLEAN_TRUE with NO
LTE LST CELLRESEL Indicates the RSRQ
MBSFN
multiplied
when all subframes.
theby intra-
threshold
BitString10: for starting
Indicates
BTS3900, BTS3900 MOD CELLRESEL TReselEutranSfHigh.
frequency
intra-frequency neighboring
Indicates
that the the RSRQ NO
LTE LST CELLRESEL cells areMBSFN
measurements. configured It
threshold
subframe
with at least fortwo starting
determines
inter-frequency
configurations the or
of all
BTS3900, BTS3900 MOD CELLRESEL antenna ports.
probability
inter-RAT
neighboring ofcellstriggeringare NO
LTE LST CELLRESEL Set this parameter to
cell
the reselection
measurements.
same as or toIt an
BOOLEAN_FALSE
Indicates
BTS3900, BTS3900 MOD CELLRESEL intra-frequency
determines
subsets
when one ofthe the
that
of
RSRQ
the ofintra-
the NO
LTE LST CELLRESEL threshold
neighboring
probability
serving for
cell. of cell
cell. For
triggering
Indicates
frequency
reselection
details, whether
seeneighboring
to3GPP cells toon
TS
cell
cells reselection
BitString11:
set theis RSRQ
configured to an
Indicates with
BTS3900, BTS3900 MOD CELLRESEL lower-priority
36.304.
inter-frequency
that some neighboring or port.
threshold
only for
one antenna
frequencies. It NO
LTE LST CELLRESEL inter-RAT
cells have neighboring
different UL-
reselection
determines to
thecells on
cell.
DL
the For details,
configurations
serving frequency. see from
BTS3900, BTS3900 MOD CELLRESEL probability
Indicates
3GPP
the serving TS the of
36.304.
TDD triggering
minimum cell. NO
LTE LST CELLRESEL cell
For details, see to
reselection
required
Indicates RXwhethersignal 3GPPinter-
to
frequency
quality
set used or
cell reselection
TS 36.331. inter-RAT
in intra-
BTS3900, BTS3900 MOD CELLRESEL neighboring
frequency cells on
parametersE-UTRAN in NO
LTE LST CELLRESEL lower-priority
cell reselection, which
compliance
Indicates thewith network 3GPP
ADD frequencies.
corresponds
Release 9 in For
to
SIB3. the IE
BTS3900, BTS3900 MOD CELLRESEL
CELLRESELCDMA20 synchronization
details, see status.
q-QualMin
Indicates in3GPP
whether SIB3. TS NO
LTE LST
00 CELLRESEL If thisvalue
Indicates
36.304.
This parameter
the
is included istoset
ADD configure
to BOOLEAN_TRUE,
evaluation the
BTS3900, BTS3900
MOD in criteria
CDMA2000 Rperiod
and
system
for a
used
CELLRESELCDMA20 the
UE
in E-UTRAN
to
the determine
evaluation andofthe cell NO
LTE 00 time
CDMA2000
whether information. RAN For
to reselect are a
00 reselection. For
ADD
MOD details,
synchronized
neighboring see 3GPP without TS
BTS3900, BTS3900 LST details, see 3GPP TS
CELLRESELCDMA20
CELLRESELCDMA20 36.331.
drifts.
CDMA2000 If this parameter
HRPD cell NO
LTE CELLRESELCDMA20 36.304.
00
00
00 Indicates
is
to set
camp to on. whether
Duringtothe
ADD
MOD
LST set the parameters
BOOLEAN_FALSE,
BTS3900, BTS3900 evaluation period, if
CELLRESELCDMA20
CELLRESELCDMA20
CELLRESELCDMA20 related
E-UTRANto cell andinthe NO
LTE the signal quality a
00
00
00 reselection
CDMA2000to RAN are
ADD neighboring
MOD
LST Indicates
CDMA2000
Indicates
not the
synchronized. scaling
HRPD.
whether to
For
BTS3900, BTS3900 CELLRESELCDMA20 CDMA2000
Indicates HRPD
whether cell
the
CELLRESELCDMA20
CELLRESELCDMA20 factor
set the
details, applied
speed-
see 3GPP to TS NO
LTE 00 is better than
information that in
element
00 TReselCdmaHrpd
00
ADD
MOD
dependent
36.331.
the
(IE) serving
Indicates the
scaling
cell andfor
scaling a
BTS3900, BTS3900 LST high-mobility
parameters UEs.
related The
to
CELLRESELCDMA20
CELLRESELCDMA20 UE camps
longCodeState1XRTT
factor applied on the
toof NO
LTE CELLRESELCDMA20 actual
cell duration
reselection to cell
00
00 serving
is contained
TReselCdmaHrpdcell for in more
system for
00
ADD reselection
CDMA2000 ofHRPD.high-
MOD
LST than 1s, themessage
information
medium-mobility UE UEs.8
BTS3900, BTS3900 CELLRESELCDMA20 mobility
For details,
attempts UEs see to 3GPP
toduration
reselect
CELLRESELCDMA20
CELLRESELCDMA20 (SIB8).
The actualWhen this isof NO
LTE 00 CDMA2000
TS
the 36.331.
neighboring HRPD
00
00 parameter
cell reselection is set ofto
ADD
MOD equal
CDMA2000 to HRPD cell
BTS3900, BTS3900 LST CFG(Configure),
medium-mobility the
UEs IE
CELLRESELCDMA20
CELLRESELCDMA20 TReselCdmaHrpd
to camp on. For details NO
LTE CELLRESELCDMA20 longCodeState1XRTT
to CDMA2000 HRPD
00
00 multiplied
about this by
00
MOD
is
is contained
equal to parameter,
TReselCdmaHrpdSfHi in SIB 8.
BTS3900, BTS3900 LST see
When 3GPP TS 36.331.
CELLRESELCDMA20
CELLRESELCDMA20 gh. For details, see is
this
TReselCdmaHrpd parameter
NO
LTE set to
multiplied
3GPP TS by NOT_CFG(Not
36.331.
00
00 configure),
TReselCdmaHrpdSfM the IE
LST
longCodeState1XRTT
edium. For details, see
CELLRESELCDMA20
is
3GPPnot contained
TS 36.331. in SIB
00
8. The CDMA2000
1xRTT-specific long
code state is
automatically
Indicates the
evaluation period for a
UE to determine
whether to reselect a
ADD neighboring
CELLRESELCDMA20 CDMA2000 1xRTT cell
00 Indicates
to camp on. whether
Duringthe the
ADD
MOD parametersperiod, applicable
BTS3900, BTS3900 evaluation if
CELLRESELCDMA20
CELLRESELCDMA20 only for cellquality reselection NO
LTE the signal in a
00
00 to
ADD neighboring 1xRTT
CDMA2000
MOD
LST need to be set.
BTS3900, BTS3900 CELLRESELCDMA20 CDMA2000 1xRTT cell
CELLRESELCDMA20
CELLRESELCDMA20 Indicates whether NO
LTE 00 is better than that in
00
00 speed-dependent
ADD
MOD the serving cell and a
BTS3900, BTS3900 LST scaling parameters
CELLRESELCDMA20
CELLRESELCDMA20 UE camps
Indicates onscaling
the the NO
LTE CELLRESELCDMA20 need to be set
00
00 serving
factor cell
applicable for for tocell
more cell
00
ADD reselection to
MOD
LST than 1s, theofUE
reselection medium-
BTS3900, BTS3900 CELLRESELCDMA20 CDMA2000
Indicates
attemptsUEs 1xRTT.
thereselect
to scaling
CELLRESELCDMA20
CELLRESELCDMA20 mobility to NO
LTE 00 factor
the applicable
neighboring
evaluation toforcell
00
00 CDMA2000period 1xRTT. a
MOD
LST
ADD reselection
CDMA2000
UE to determine
For details, see 3GPP of high-
1xRTT cell
BTS3900, BTS3900
CELLRESELCDMA20
CELLRESELCDMA20
CELLRESELGERAN mobility
to camp
whether
TS 36.331. UEs
on. to details
For
to reselect a NO
LTE
00
00
LST CDMA2000
about thisthe
neighboring
Indicates 1xRTT.
parameter,
GERAN
local ID
BTS3900, BTS3900 LST
CELLRESELGERAN For
seethe
cell
of details,
3GPP
to campIt
cell. TSseeon. 3GPP
36.331.
During
uniquely
CELLRESELCDMA20
ADD TS
the 36.331.
evaluation YES
LTE MOD identifies a cellperiod,within a
00
CELLRESELGERAN
CELLRESELGERAN if
BS. the signal quality in a
BTS3900, BTS3900 MOD
RMV neighboring GERAN
ADD Indicates
Indicates the
whether scaling to NO
LTE CELLRESELGERAN
CELLRESELGERAN cell is better than that
CELLRESELGERAN
LST factor
set the applied
speed-
in the serving cell and to
BTS3900, BTS3900 MOD
CELLRESELGERAN TReselGeran
dependent
a UE campsscaling onforthe
ADD medium-mobility UEs. NO
LTE CELLRESELGERAN parameters
Indicates
serving cell related
thefor scaling
more to
CELLRESELGERAN
LST The
cell actual
thanreselection
factor 1s,applied
the UEduration
toto of
BTS3900, BTS3900 MOD
CELLRESELGERAN cell
GERAN. reselection
TReselGeran
attempts
Indicates to ofhigh-
for
thereselect
ADD NO
LTE CELLRESELGERAN medium-mobility
mobility
the neighboring
evaluation UEs. period TheUEs for a
CELLRESELGERAN
LST to GERAN is equal to
ADD actual
GERAN
UE duration
cell to camp
to determine of cell
BTS3900, BTS3900 MOD
CELLRESELGERAN TReselGeran
CELLRESELUTRAN reselection
on.
whether to reselect a of high- NO
LTE CELLRESELGERAN multiplied by to
LST mobility
neighboring
Indicates UEs theUTRAN local ID
LST TReselGeranSfMediu
BTS3900, BTS3900 CELLRESELUTRAN GERAN
cell
of to cell.
the campis equal
It on. to
During
uniquely
CELLRESELGERAN m.
Indicates the scaling YES
LTE ADD
MOD TReselGeran
the evaluation
identifies a cell period,
CELLRESELUTRAN factor
multiplied
if applied
the signal byqualityto in aa
within
CELLRESELUTRAN BS.
TReselUtran for
BTS3900, BTS3900 MOD
RMV TReselGeranSfHigh.
neighboring UTRAN
ADD medium-mobility
Indicates whether UEs.to NO
LTE CELLRESELUTRAN
CELLRESELUTRAN cell is better
Indicates the than
scalingthat
CELLRESELUTRAN
LST The
set
in actual
theserving
the duration
speed-cell and of
BTS3900, BTS3900 MOD factor
cell applied
reselection
dependent scalingtoof
CELLRESELUTRAN a UE camps on
TReselUtran for the
high- NO
LTE ADD
CELLRESELUTRAN medium-mobility
parameters
serving cell related
for UEs
more to
CELLRESELUTRAN
LST mobility
to
cell UTRAN UEs.
reselection is The
equal
to to
than
actual 1s, the UEof cell
duration
BTS3900, BTS3900 MOD
CELLRESELUTRAN TReselUtran
UTRAN.
attempts to of multiplied
reselect
ADD reselection high- NO
LTE CELLRESELUTRAN by
the neighboring
CELLRESELUTRAN
LST mobility UEs to
TReselUtranSfMedium
BTS3900, BTS3900 MOD UTRAN
UTRAN cell
is equal to camp to
CELLRESELUTRAN .on. NO
LTE CELLRESELUTRAN Indicates
TReselUtran
The value the multiplied
offset to
LST Indicates
Indicates
the
by minimum the
the minimum
TReselUtranSfHigh. local
required ID
T_RESEL_SF_0DOT2
required RX level for
BTS3900, BTS3900 LST CELLSEL
CELLRESELUTRAN of
RX
The
5 the cell.
level.
means It
valuea scaling is
This uniquely
value
the cell toin YES
LTE MOD CELLSEL identifies
included
T_RESEL_SF_0DOT2
factor of 0.25, abecome
cell within
criteria a a
S
candidate
BS.
and
5 means for
usedainscaling thecell
BTS3900, BTS3900 MOD CELLSEL T_RESEL_SF_0DOT5
selection. This value is
evaluation
factor
means
Indicates of 0.25,
0.5, of
the and cellso Son.
minimum NO
LTE LST CELLSEL included
selection.
T_RESEL_SF_0DOT5 in criteria
This
required
and used RXinisandsignal
the
parameter
means
quality 0.5,
for the validsoto
cell only
on.
BTS3900, BTS3900 MOD CELLSEL evaluation
Indicates of
the cell
offset to
when
become the a cell
candidateselection NO
LTE LST CELLSEL selection.
the minimum For details,
required
is
for triggered
cell selection,by periodic
which
see
RX
searches3GPP
level for TS
for the 36.304.
cell.IEIt
higher-
BTS3900, BTS3900 MOD CELLSEL corresponds to the
is included
priority PLMNs in SIB1.
criteria
and the S NO
LTE LST CELLSEL q-QualMin in
and
UE used
is
Indicates served
This valuewhether in theby
is included a to
BTS3900, BTS3900 MOD CELLSEL evaluation
Visited
set Public
the offset
in criteria Sofand cell
Land
to the
used
selection.
Mobile NetworkThis ofRX NO
LTE LST CELLSEL minimum
in the evaluation required cell
parameter
(VPLMN).
level for
selection. For the iscell.
For required
details,
details,
BTS3900, BTS3900 MOD CELLSEL only
see 3GPP
see when the
3GPP cell
TS 36.304.
TS 36.304. NO
LTE LST CELLSEL selection is triggered
Indicates
by periodic the local ID
searches
BTS3900, BTS3900 LST CELLSIMAP of the cell.
for higher-priority It uniquely
YES
LTE MOD CELLSIMAP identifies
PLMNs and a cell thewithin
UE is a
BS.
served by a Visited
Public Land Mobile
Network (VPLMN). For
details, see 3GPP TS
36.304.
Indicates whether the
mapping from SIBs to
SI messages is
enabled. If it is
disabled, a fixed
configuration is used
for the mapping from
SIBs to SI messages
BTS3900, BTS3900 MOD CELLSIMAP
and the SIthe
Indicates window NO
LTE LST CELLSIMAP
size. If it
transmission is enabled,
period for
BTS3900, BTS3900 MOD CELLSIMAP the mapping
system information from SIBs
to SI messages
Indicates and NO
LTE LST CELLSIMAP block typethe 2 (SIB2).
the SI
For window
transmission
details, see size
period3GPP are
for
BTS3900, BTS3900 MOD CELLSIMAP determined
system
TS 36.331. based on
information
Indicates NO
LTE LST CELLSIMAP block typethe
the transmission 3 (SIB3).
transmission
period,
For quantity,
details, seeperiod andfor
3GPP
BTS3900, BTS3900 MOD CELLSIMAP system
data36.331.
TS information
traffic of SIBs.
Indicates NO
LTE LST CELLSIMAP block typethe 4 (SIB4).
transmission
For details, see period3GPP for
BTS3900, BTS3900 MOD CELLSIMAP system
TS 36.331. information
Indicates NO
LTE LST CELLSIMAP block typethe 5 (SIB5).
transmission
For details, see period3GPP for
BTS3900, BTS3900 MOD CELLSIMAP system
TS 36.331. information
Indicates NO
LTE LST CELLSIMAP block typethe 6 (SIB6).
transmission
For details, see period3GPP for
BTS3900, BTS3900 MOD CELLSIMAP system
TS 36.331. information
Indicates NO
LTE LST CELLSIMAP block typethe 7 (SIB7).
transmission
For details, see period3GPP for
BTS3900, BTS3900 MOD CELLSIMAP Indicates
system
TS 36.331. the
information policy of
processing NO
LTE LST CELLSIMAP Indicates
block typethe 8repeated
(SIB8).
secondary
transmission
For details,
Indicates the notification
seeperiod3GPP
policy for
of
BTS3900, BTS3900 MOD CELLSIMAP (SN)
system
TS broadcast
36.331.information
processing repeated for the
Indicates
Earthquake the NO
LTE LST CELLSIMAP block type
primary 10and
notification (SIB10).
transmission
Tsunami
For details,
(PN) Warning
broadcast seeperiod3GPP
for for
the
BTS3900, BTS3900 MOD CELLSIMAP system
System
TS 36.331.information
(ETWS).
Indicates theand
Earthquake A
duration NO
LTE LST CELLSIMAP block
of the type
repeated
Tsunami primarySN 11is(SIB11).
Warning a
For
System (ETWS).3GPP
seconddetails,
notification SN see
that
(PN) has
A
BTS3900, BTS3900 MOD CELLSIMAP TS
the 36.331.
same PN IEs Message
broadcast
repeated for is thea NO
LTE LST CELLSIMAP Identifier and Serial
Earthquake
second PN and
that has
Number
Tsunami
the same as those
Warning
Message in
BTS3900, BTS3900 MOD CELLSIMAP
the first
System SN.
(ETWS).
Identifier and Serial The value NO
LTE LST CELLSIMAP
MERGE
Number IEs indicatesas those that
BTS3900, BTS3900 MOD CELLSIMAP thethe
in cellfirst
stops PN. If this
broadcasting the to first NO
LTE LST CELLSIMAP parameter
Indicates theis setDelta
MOD SN and
MERGE, then
the eNodeBto
value corresponding
broadcasts the second
BTS3900, BTS3900 CELLULPCCOMM stops broadcasting the
PUCCH
SN. The format
value 1. For NO
LTE LST first PN see
Indicates and starts
the3GPP DeltaTS
MOD details,
DISCARD indicates
CELLULPCCOMM broadcasting
value corresponding the to
BTS3900, BTS3900 CELLULPCCOMM 36.213.
that the cell ignores
second
PUCCH format
Indicates PN. the If this
1b. For
reference NO
LTE LST the second
Indicates
parameter theisSN and
Delta
set
MOD
CELLULPCCOMM
details,
signal powersee 3GPP
of atoTS
continues
value
DISCARD,
36.213. corresponding
the to
BTS3900, BTS3900 CELLULPCCOMM sector equipment
broadcasting
PUCCH
eNodeB format
discards the2.first
For
the NO
LTE LST group for a cell (all
SN.
Indicates
details,
second see
PN the DeltaTS
3GPP
and
MOD
CELLULPCCOMM sets of sector
value
36.213.
continuescorresponding
equipment in the to
BTS3900, BTS3900 CELLULPCCOMM
PUCCH
broadcasting
sector format
equipment 2a.
the first For NO
LTE LST Indicates the3GPP DeltaTS
MOD details,
PN. have
group see the same
CELLULPCCOMM value corresponding
BTS3900, BTS3900 CELLULPCCOMM 36.213.
Indicates
reference the
signal power to
PUCCH
offset (deltaformat value)2b. of For NO
LTE LST power). If this
MOD details,
message see 3GPP
3isrelative TS
CELLULPCCOMM
ADD parameter
36.213. set to to
BTS3900, BTS3900 CELLULPCCOMM the preamble.
EUSECTOREQMGRO 32767, the parameter This
NO
LTE LST
UP power
value isoffsetinvalid, hasand a
CELLULPCCOMM
MOD step size
the cell uses theof 2. For
BTS3900, BTS3900
EUSECTOREQMGRO details,
reference see 3GPP
signal TS
power NO
LTE 36.213.
UP specified
Indicates by thethe local
BTS3900, BTS3900 LST TATIMER
LST ReferenceSignalPwr
identity of thelength
cell. It
EUSECTOREQMGRO Indicates
parameter thein the a of YES
LTE MOD TATIMER uniquely
the uplink timeidentifies
UP PDSCHCfg
cell within anMO. For
eNodeB.
alignment
details, seetimer 3GPP forTS
BTS3900, BTS3900 MOD TATIMER
UEs
36.213.in the This cell. A UE is NO
LTE LST TATIMER
considered
parameter takes not time- effect
aligned in the
only when parameters uplink if
the timer expires.and
MultiRruCellFlag
MultiRruCellMode are
set to
BOOLEAN_TRUE and
MPRU_AGGREGATIO
Indicates the length of
timer
Indicates 301.the Fortimer details,
length of
see
value 3GPPof Timer
timer 310. For details, TS 36.331.
300.
This
see timer is
For details,
3GPP TS started
see 3GPP
36.331.
when
TS 36.331.
This the UE
timer is started sends an
RRC
This
when
Indicates Connection
timer
the the UEis started
detects
local ID
LST UETIMERCONST Reestablishment
when
any the
fault UE sends
BTS3900, BTS3900 of the cell.at Ittheuniquely
MOD Request
RRCConnectionReque message. YES
LTE physical
identifieslayer. a cell within a
UETIMERCONST The
st.
The timer
timer is
is stopped
stopped if, if
MOD BS.
BTS3900, BTS3900 before
Before
the UE the it expires,
detects timerone theof
UETIMERCONST UE receives an RRC NO
LTE expires, itthe
is stopped
LST UETIMERCONST the following
Indicates
Connection length ofif
before
the UE timer receives
BTS3900, BTS3900
MOD timer 311.expires:
Reestablishment For details, (1)
orfault
UETIMERCONST RRCConnectionSetup
The 3GPP physical-layer NO
LTE see
RRC Connection TS 36.331.
LST UETIMERCONST or
is
This rectified;
timer is(2) A
started
MOD Reestablishment
RRCConnectionReject
handover is triggered;
BTS3900, BTS3900 when
Reject the UE starts
message. The the
UETIMERCONST .RRC
(3) The UE initiates
connection an NO
LTE timer
After is also
the timer stopped
expires, if
LST UETIMERCONST RRC
Indicates connection
reestablishment the UL cyclic
MOD the
the selected
UE
reestablishmententers cellthe
BTS3900, BTS3900 prefix
procedure.
becomes length anstate. of a cell.
UETIMERCONST RRC_IDLE
procedure.
Indicates
A cyclic the
prefix maximum
can NO
LTE
LST UETIMERCONST
The timer
Indicates
unsuitable
After
number the of
is
the
timer
stopped
cell.
successive Forbe
length
expires, ofif,a
the
MOD common
before
the DL
definition the or
cyclic extended
timer
of aprefix suitable of
BTS3900, BTS3900 the
"in
cyclic UEprefix.
sync"
expires, enters
indications
the UEAn theselects
UETIMERCONST a cell.
cell,
Indicates
RRC_IDLE see A DL
3GPP
the cyclic
mode TS
maximum ifForthe NO
LTE received
extended
an
prefixE-UTRAN
can from
cyclic
be L1.
aor prefix
inter-
LST UETIMERCONST 36.331.
number
security of
mode successiveis not
MOD details,
is
RAT generally
common cell seeto 3GPP
used
camp
orIf extended in
on.TSa
BTS3900, BTS3900 After
"out ofthe
activated.
36.331. sync"timer theexpires,
UETIMERCONST complex
After
cyclic
the the
UEprefix. environment
timer
enters An expires,
the NO
LTE indications
security
with
the UEa strong mode
enters receivedis
multi-
the
LST UETIMERCONST extended
RRC_IDLE cyclic
mode. prefix
ADD CELL from
activated,
path
RRC_IDLE L1.
effecttheFortheand details,
mode. UE long
BTS3900, BTS3900 Indicates
is
see generally
3GPP used in a
MOD CELL initiates
delay. Inan
administrative
complex a TS RRC
cell,
environment
36.331.
the UL
state of NO
LTE connection
LST CELL cyclic
the
with cell.
a prefixIf this
strong length
multi- can
ADD CELL reestablishment
be different from the
BTS3900, BTS3900 parameter
path
Indicates effectthe is
and set to
long
additional
MOD CELL procedure.
DL one. In addition, NO
LTE CELL_HIGH_BLOCK,
delay.
spectrum In aemission,
cell, the UL
LST CELL the
the ULprefix
cell or
is DL cyclic can
deactivated
ADD CELL cyclic
which restricts length the
BTS3900, BTS3900 prefix
immediately.
be lengthfrom
different of
If a the
this cell
MOD CELL emission
must be power
the same of as the NO
LTE parameter
DL one.
Indicates Inthe is set
addition,
active
length to of
LST CELL UEs
Indicates
that in
ofofthethe the cell.
cell For
common
using
CELL_MIDDLE_BLOC
the
state
the UL
timer
details, orthe
see DL
used cyclic
cell.
the It
to3GPP
BTS3900, BTS3900 public
the same radio LBBP. interface For
LST CELL K, the
prefix
consists
determine
TS 36.101.cell
length of isthe of
whether a cell to NO
LTE (CPRI)
details, compression
see 3GPP TS
deactivated
must
activated
block be
a the
and
middle- when
same itas
type.
36.211. CPRI
has
that no
of the
deactivated usercell
blocking-priority to using
states.serve
cell. Ifin
BTS3900, BTS3900 BLK CELL compression is used
during
the same the period NO
LTE LST CELL Indicates cascading isFor
CellAdminState
RRU LBBP.
the cell set
specified
details,
specific
to see by 3GPP
offset the for the TS
scenarios to enable
BTS3900, BTS3900 BLK CELL CellMidBlkTimer
36.211.
serving
CELL_MIDDLE_BLOCcell. It affects
more RRUs to be NO
LTE LST CELL parameter,
the
K, probability
the isor isof
cell without
cascaded
deactivated
triggering
deactivated when the
handovers
ADD CELL changing thewhen CPRIno
BTS3900, BTS3900 timer
from expires
the
user accesses serving cell to
MOD CELL data rate. The the cell NO
LTE irrespective
its neighboring
during the period of whether
cells.
of A
LST CELL parameter
Indicates the value
it hasspecified
smaller
time users
value topreamble
ofserve.
by this
this If
ADD CELL NO_COMPRESSION
BTS3900, BTS3900 format
this
parameter
parameter. used
parameter in
leads
The the
is set
to ais
cell cell.
to
MOD CELL indicates that CPRI NO
LTE For
higher
also details,
CELL_LOW_BLOCK,
Indicates thesee
probability.
deactivated ID 3GPP
ofif Forthe
the
LST CELL compression is not
ADD CELL TS
the 36.211.
cell
notification
details,
Indicates is
see deactivated
area
3GPP within TS
BTS3900, BTS3900 used, the whether
timer expires. parameter to
onlyan
which when the cell has
LTE
MOD CELL value aemergency
36.331.
set warning area NO
LST CELL no
ID. user
notification
Indicates the to serve.
is
whether to
NORMAL_COMPRES
Indicates maximum
ADD CELL broadcast.
configure
SION indicatesthe The area
that
BTS3900, BTS3900 transmit power that a
MOD CELL consists
maximum
CPRI ofTX
compression one or is
power of NO
LTE UE can apply to uplink
LST CELL more
the
used, UE cells
andin theandcell.
the canIfbe
ADD CELL transmission
customized byin the
BTS3900, BTS3900 the
cell. value
parameterIt is ofvalue
used this in cell
MOD CELL operators. For details NO
LTE parametercriterion
ENHANCED_COMPR
selection is not S to
LST CELL about
Indicates this parameter,
the
ADD CELL specified,
ESSION
calculate the number
indicates
the that
BTS3900, BTS3900 see
of
maximum
enhanced3GPP
ports TS
forpower 36.413.
transmitting
CPRI is If
MOD CELL compensated
reference signals power. NO
LTE
LST CELL subject
compression
the value to of thethis isUE in a
ADD CELL cell. As
capability.
used(Enhanced specified in
CPRI
BTS3900, BTS3900 parameter
protocols, is not
the CRS
MOD CELL compression
specified, the does not NO
LTE Port Number
LST CELL take
maximum effectpower in isset
ADD CELL parameter
V100R007C00. can be If this
BTS3900, BTS3900 subject
Indicates
to 1, 2, or 4. to the
whether (CRSUE the
LTE
MOD CELL parameter
capability.
cell is an air iscell.
For set to is
details, NO
LST CELL short for Cell
ENHANCED_COMPR
ADD CELL see 3GPP TS
Reference 36.304.
BTS3900, BTS3900 ESSION in Signal.)
MOD CELL The value 1 indicates
V100R007C00, CPRI NO
LTE
LST CELL that one CRStakes
compression port
(port
effect0)inisthe configured.
same way
The value
as when this 2 indicates
that two CRS
parameter is set ports to
(port 0
NORMAL_COMPRESand port 1) are
configured.
SION.). ThisThe value
4 indicates must
parameter that four be set
ENHANCED_COMPR
ESSION
Indicates indicates the reference that
enhanced
signal power CPRI
compression
headroom of each is used,
and
physical NULL indicates
antenna.
Indicates
that
If thisthis the work
parameter
parameter is setis
mode
invalid. of the
Enhanced
to 0, the parameter cell. The
ADD CELL
BTS3900, BTS3900 DL_ONLY
CPRI
does not compression mode
take effect.is
MOD
ADD CELL NO
LTE applies
an enhanced only
That is, the reference to the
capability
LST CELL
SFNAUXRESBIND carrier
of normal
signal aggregation
power CPRI
BTS3900, BTS3900 MOD scenario.
compression andcell not
ADD headroom
Indicates of the
the maximum NO
LTE SFNAUXRESBIND supported by TDD
SFNAUXRESBIND equals
number the
of CPRIvalue of
LST cells. The
BTS3900, BTS3900 MOD Reference
beamforming Signal layers,
SFNAUXRESBIND compression type must NO
LTE SFNAUXRESBIND Power
that is, Margin
the rank inofthe
be the
PDSCHCfg same for
MO.
DSP
LST Indicates
beamforming.
sectors using
the cell TheIDthis
the
If of
BTS3900, BTS3900 CELLCALIBRATION
SFNAUXRESBIND parameter
the local cell. It to a
value is set
same
non-zero RRU chainthe
value, that YES
LTE LST CELLBF uniquely
SINGLE_LAYER_BF
Indicates identifies
the to quantity a
MOD CELLBF is
cellconnected
reference
within signal
an eNodeB.LBBPd
power
indicates
to be included
boards, single-stream
while in the
different
BTS3900, BTS3900 MOD CELLBF headroom of the cell
beamforming
measurement
CPRI compression (that
report is, NO
LTE LST CELLBF equals this value.
LST beamforming
after
Indicates a DL
types can be used for ICIC
the with
local the
ID
BTS3900, BTS3900 CELLDLICICMCPARA rank
of theofcell.
measurement
Indicates
sectors 1),
using and
the the is
event
interval
It uniquely
the
value
triggered,
between which
periodic can YES
LTE MOD identifies
same RRU a cell
chain within
that a
MOD
CELLDLICICMCPARA DUAL_LAYER_BF
be set
measurement
BS. to
is connected to reports
BTS3900, BTS3900 CELLDLICICMCPARA Indicates
indicates
SAME_AS_TRIG_QU
that
UBBPd are boards.
sentthe after
maximum
dual-stream When a DL
number NO
LTE LST the value of this be
beamforming
AN
ICIC or BOTH.of
measurement cells (that to is,
MOD
CELLDLICICMCPARA included
beamforming
The
event
parametervalue in iseach
is triggered. with the
changed, For
BTS3900, BTS3900 CELLDLICICMCPARA measurement
rank
the cell
Indicates of 2).
SAME_AS_TRIG_QU
details, see the3GPP
corresponding report
number
quantity TS NO
LTE LST after
AN
36.331.
of
used a
periodic
to this DL
indicates
insector ICIC that
are the
the evaluation
MOD
CELLDLICICMCPARA measurement
quantity to be included event is
measurement
automatically
of a DL ICIC reports
BTS3900, BTS3900 CELLDLICICMCPARA triggered.
is the same For as details,
that
after a DL
reactivated. event.
measurement ICIC NO
LTE LST see
MOD
CELLDLICICMCPARA This3GPP
specified
measurement
The quantity
parameter byTS the
can 36.331.
event
isbe used is
TriggerQuantity
triggered.
only
RSRP when or For
RSRQ.
Indicates the time-to- details, The
BTS3900, BTS3900 CELLDLICICMCPARA
parameter.
see 3GPP
MultiRruCellMode
measured
trigger forthe TSThe
RSRP
the DL value
36.331. is
ICIC NO
LTE LST Indicates
MOD BOTH
set
values to
measurement indicates
SFNare stable,
or that
event.
CELLDLICICMCPARA hysteresis for theRSRQ DL
BTS3900, BTS3900 CELLDLICICMCPARA both RSRP
CELL_COMBINATION
varying
When littleand
detecting withthat the
ICIC measurement NO
LTE LST ,values
load,
and
the
event. and
the
signal arevalue
This
included.
therefore
quality
parameter of in this the
MOD
CELLDLICICMCPARA The
serving measured
parameter
there is little depends RSRP
and that on
signal
celldecrease in
is used
values to
are stable,
BTS3900, BTS3900 CELLDLICICMCPARA the
fluctuation.
at sector.
least one When
The this
frequent
Indicates
varying triggering
the
little offset
with the of
for NO
LTE LST parameter
measured
neighboring RSRQ
iscell
set to
meet
MOD event
DL
load, ICIC evaluations
and event
therefore A3. due
This
CELLDLICICMCPARA NULL,
values
the enteringthe
vary CPRI
with
condition, the
BTS3900, BTS3900 CELLDLICICMCPARA to radio
offset
there is signal
the
is does
little difference
signal
compression
load
the UE
Indicatesbut
fluctuations. arethe type
likely
not
offset
For sendoffor
to NO
LTE LST between
fluctuation. the Thequality of
MOD carriers
reflect
a
DL
details,
a the
measurement
ICICsee
neighboring depends
signal
event 3GPP A6.
cell on
report This
TS
and
CELLDLICICMCPARA measured
the value
quality ofthe RSRQ
ofserving
the cell incell.
BTS3900, BTS3900 CELLDLICICMCPARA to the
offset
36.331.
that ofiseNodeB
the difference
values vary
CPRICompression.
real time. with the NO
immediately.
between the Instead,
quality
LTE LST A larger
load
When
the and
UEthis
value
sendsare likely
parameter
acell report toofis
MOD
CELLDLICICMCPARA a neighboring
indicates
reflect that
the othersignal a and
BTS3900, BTS3900 CELLDLICICMCPARA set
only
that toof any
when the the
serving value,
signal
neighboring
quality
the sector
quality of the
CPRI
cell
continuously cell incell.
must NO
LTE LST A larger
have
real better
time. value
For quality
details, for
MOD
CELLDLICICMCPARA compression
meets
indicates the type
entering
that a of
the
see reporting
Indicates
3GPP
Indicates the of
TSstop
the start the
36.331. time
time
BTS3900, BTS3900 CELLLOWPOWER carriers
condition
neighboring depends
during
cell must on
the
event.
of
of the
the low
low power
power NO
LTE LST the value
time-to-trigger.
have better of quality for
MOD consumption
consumption mode.
mode.
CELLLOWPOWER SectorCpriCompressio
the reporting of the If
BTS3900, BTS3900 CELLLOWPOWER the
n.
event.stop time is earlier
Indicates the duration NO
LTE LST than or the same as
MOD
CELLLOWPOWER in
thewhich
start the time,transmit the stop
BTS3900, BTS3900 CELLLOWPOWER power
time is for assumed services to isbe
Indicates the duration NO
LTE LST reduced
a time of in the the next cellday. in
MOD
CELLLOWPOWER in
lowwhich
power the reference
BTS3900, BTS3900 CELLLOWPOWER signal
consumption transmitmode. power
NO
LTE LST is reducedthe
Indicates
Indicates in the
the duration cell in
MOD
CELLLOWPOWER low power
percentage
in which RF of the
channels
BTS3900, BTS3900 CELLLOWPOWER consumption
transmit
are shut power downmode. inforthe NO
LTE LST services to the total
MOD cell in low power
CELLLOWPOWER transmit power for
BTS3900, BTS3900 CELLLOWPOWER consumption mode.
services when
Indicates the amount the low NO
LTE LST
MOD power
by which consumption
the reference
CELLLOWPOWER
BTS3900, BTS3900 CELLLOWPOWER mode
signal is implemented
transmit power
by NO
LTE LST is reducedof
means in reducing
the cell in
CELLLOWPOWER the
low transmit
power power for
services.
consumption mode.
the transmit power for
are the frequency-
services; 2. lowers the
specific
transmit offsets power for for the
serving frequency
reference signals; 3. and
neighboring
shuts down some RF frequency
respectively,
channels in the Ocs is the
cell; 4.
cell-specific
shuts down the cell. offset for
MOD the
Thisserving
duration cell,
smooths and
BTS3900, BTS3900 CELLLOWPOWER Hys is the hysteresis
the transition from the NO
LTE LST for intra-frequency
normal
Indicates mode the local to theID
CELLLOWPOWER handover.
BTS3900, BTS3900 LST CELLMRO low
of power
the parameter
cell. It uniquely
If this
Indicates is set YES
LTE MOD CELLMRO consumption
identifies
to NOT_CFG(Not athe cell upper
mode within for
limit of
theeNodeB.
an cell
cell. If the individual
configure)
offset
conditions (CIO)and for the thecell
BTS3900, BTS3900 MOD CELLMRO
Inter-Freq
Indicates
adjustment
to enter the range HO
the trigger
lower
low power for NO
LTE LST CELLMRO
Event
limit
Indicates
the ofType
cell
consumption cell
in the parameter
individual
mobility
mode are
BTS3900, BTS3900 MOD CELLMRO is
noset
offset
Allocation
robustness
longer
Indicates to
(CIO) and during
met
the
EventA4(EventA4),
adjustment range the NO
LTE LST CELLMRO Retention
optimization
this period
Allocation and Priority
of time,for
(MRO). the
upper
the
(ARP)
This
cell cell andin the
parameter
will
Retention not lower
mobility
threshold enterneeds
Priority limits
for
thethe
Indicates
of the CIO adjustment
BTS3900, BTS3900 MOD CELLMRO robustness
Silver-level
to
low
(ARP)be set
power
admission only
threshold services.
when
threshold for theA
range for NO
LTE LST CELLMRO optimization
service
the is the
CioAdjLimitCfgInd
consumption
Golden-level
for the handed-over
cell in
(MRO).
definedmode;
services. as a
inter-frequency
This
otherwise,
Indicates
A parameter
Silver-level
parameter
service isis
the setMRO
itservice
enters
defined needs
to ifthe
as
BTS3900, BTS3900 MOD CELLRACTHD service
are with
calculated QCI by of
using1.
to
its
CFG.
low be
ARP
admission
a set
power
Golden-level
This thresholdonly
value when
thresholdis service
applies NO
LTE LST CELLRACTHD the
smallerfollowing
CioAdjLimitCfgInd
consumption
for the than
handed-over formulas:
or
mode equal
if
to its
bothARP UL value
and is
DL.
Lower
parameter
Indicates
to
and the
service
smaller takes limit
value
with
than the
the=
is -24,
set
of
QCI
or this to
of
equal 2.
BTS3900, BTS3900 MOD CELLRACTHD If the satisfaction
Upper limit < thresh rate
LTE LST CELLRACTHD
CFG.
admission
parameter
preceding
This
to
of this threshold
servicesthreshold.threshold
and
actions
with isQCI
applies in +of
The NO
110
for
larger - Ofn
the +and
handed-over
than Hys,
the value
Indicates
sequence.
to
1 isboth
service
where above
Indicates
UL
thresh
the
priority
theor offset
is
DL. afor
has
equal the toof
BTS3900, BTS3900 MOD CELLRACTHD service
If the
negative
this with
GoldServiceArpThd.
admission satisfaction
threshold, of QCI
new
correlation of
thefor A 3.
gold-
rate
RSRP
admission
This
service
level
of
with threshold
threshold
is
services.
services
the ARP threshold
defined
with applies
This
value. QCI as of a NO
LTE LST CELLRACTHD handed-over
triggering
for the handed-over service
aapplies
coverage-
Indicates
to both
Bronze-level
parameter
2 is
with above
QCI UL theand
or
of 1QCI offset
service
equal DL.
canofbe4. to for
to if
BTS3900, BTS3900 MOD CELLRACTHD based
service
admission
If
itsthe
both
this ARP inter-frequency
with
satisfaction
value
downlink
threshold, of new is
and
the rate
larger
admitted.
handover
This threshold and Hys
applies isfor NO
LTE LST CELLRACTHD silver-level
of
than services
uplink. the
handed-over
Indicates
If the Newvalue services.
with
thegold-level
satisfaction of
service
offset QCIthis
rate of
the
to
This
3 isboth
hysteresis
parameter.
services
with
admission UL
parameter
above
QCI ofof and and
orThe for
equal
handed-
2 new
can DL. inter-
applies
service
be ofto
of
If services
frequency
the satisfaction with
handover. QCI rate
BTS3900, BTS3900 MOD CELLRACTHD to
this
over both
priority
admitted. downlink
threshold,
has
services
bronze-level
1 is below this theand
aservices.
negative
with QCI
If
of this
services
uplink. parameter
New with QCI
is
silver-level set of NO
LTE LST CELLRACTHD handed-over
correlation
N
If are
the
This
threshold, admitted
satisfaction
parameter with
the service the
if both
rate
applies
handed-
to
4
ARP
the
of
to isNOT_CFG(Not
services
with above
QCI
value.
following
services
both and
of
downlinkor3
with equal
handed-
can QCI be
andof to
BTS3900, BTS3900 MOD CELLRACTHD over
configure)
this service with theQCI
2 is1 threshold,
over
admitted.
conditions
uplink.
of below
cannot Newand
services are
this
be
the
with
met:
bronze- QCI(1) NO
LTE LST CELLRACTHD Inter-Freq
handed-over
N
If are
the
Indicates
The
threshold,
level admitted
satisfaction
satisfaction
services HO
the service
the and trigger
if both
rate
rate
handed- of
admitted.
Event
with QCI Type of with4parameter
can be
the
of
over following
services
congestion
services service
handed-over with threshold
QCI
with
servicesQCI N is
QCI of
BTS3900, BTS3900 MOD CELLRACTHD is
admitted.
set
conditions
3 tothan are met: QCI(1)
LTE LST CELLRACTHD ofis
for
with below
2services
higher cannot
QCI Nthis with
or
be
are equal to NO
EventA3(EventA3),
If the
Indicates
The
threshold,
of
the 1.sum
admitted.
admitted satisfaction
satisfaction
Thisof the
the
ifthreshold handed-
this offset
both the rate
rate theof
upper
of
over services
congestion
services
applies and
service
to
and the admission with lower
with
boththreshold
QCI
with UL limits
QCI N
QCI and of
is
BTS3900, BTS3900 MOD CELLRACTHD following conditions
of
4
for
of
DL.isthebelowCIO
3services
higher cannot
threshold
Indicates than for
theadjustment
thiswith
or
be the equal QCIto NO
LTE LST CELLRACTHD are met: (1) The
range
threshold,
of
the 2.sum
admitted.
If the
handed-over
congestion
satisfaction for
This the
the
threshold
of this
satisfaction cell ofin
handed-
offset
services
threshold
rate rate
BTS3900, BTS3900 MOD CELLRACTHD inter-frequency
over
applies
and
of
with
for service
the
services
QCI
services
services to N.
withboth
admission
withwith
(2)
with
QCI ULMRO
QCI
The QCI
QCINand of
is
are
of
DL.
1 in4 calculated
cannot
threshold
the
satisfaction
of 3. This cellfor be the by
becomes
rate
threshold of using NO
LTE LST CELLRACTHD higher
Indicates than or equal
the formulas: to
the
If the
applies
the following
admitted.
handed-over
lower
services
sum satisfaction
thantowith
of this
both
thisservices
any UL
offsetrate
other
and
congestion
Lower
of
with services
QCI limitN.the =threshold
withOff
(2) + or
QCI
The Ofs of
BTS3900, BTS3900 MOD CELLRACTHD threshold,
QCI
DL.
and
for is
the
serviceshigher
admission with services
than QCI
+
2 Ocs
in the
satisfaction - Ofn
cell + Hys
becomes
rate -
ofrate 5, NO
LTE LST CELLRACTHD with
equal
If
of the
thresholdQCI
4. Thisto of
the
satisfaction
for 1 enter
the
threshold the
Upper
lowerthe than
services
congested
corresponding
of limit
with
services = Off
this
state.any with+other
Ofs
handed-over
applies to both services
UL -or and
BTS3900, BTS3900 MOD CELLRACTHD +
QCI
If Ocs
threshold,
theof
admissionis - Ofn
higher
satisfactionthe + Hys
services
than rate 2,
QCI
with
DL. QCI 3 inN.threshold
the
(2) cell The NO
LTE LST CELLRACTHD where
with
equal
of
for QCIto
services Off of
the
thesatisfaction
becomes
satisfaction is 2 the
with
handed-over
lower enter
ratethan inter-
QCI the
ofrateof
If the
frequency
congested
corresponding A3
state. offset,
1 in threshold,
services
this the cell with becomes
that
the
anyQCI QCI.
other
BTS3900, BTS3900 MOD CELLRACTHD of
and
If services
the Hys
admission with
is threshold
satisfaction the rate of
higher
services
QCI
Indicates
4 in is
the thanwith
higher
cell therate of
QCI
thebecomesthan sum orof 3 NO
LTE LST CELLRACTHD hysteresis
of
for services
the for
with intra-QCI theof
this
enter
equal
reduction
lower tohanded-over
threshold
the
than congested
theproportion
this and
frequency
2 in
servicesthe
congestion
state.
corresponding cell
with handover.
becomes
that
relief QCI.
BTS3900, BTS3900 MOD CELLRACTHD for Gold-level
threshold,
Indicates the
the GBR
services
rate
higher
offset,
If the
admission
Indicates
services. than
the
satisfaction
the the
services
threshold
When sum
threshold rate of NO
LTE LST CELLRACTHD with
reduction
this QCI
threshold of 4 enter
proportionand the
the
with
of
for theQCI
services
high
congestion of
handed-over
resource 1
with leave
occurs, QCI the of
congested
for Silver-level
congestion
congested
state.
relief
state. GBRthe
BTS3900, BTS3900 MOD CELLRACTHD 3 in
services
usage
rate
If the
thethat
services. by cell
with
the
satisfaction
When becomes
guaranteed
that QCI.
rate
offset,
higher
bit ratethe
Indicates than
(GBR) services
the therate sum of NO
LTE LST CELLRACTHD scheduling
of services
congestion algorithm
with
occurs, QCI the of
with
reduction
this QCI for
threshold
services.
provides of 2Gold-level
leave
proportion
This and thethe
4 in
rate the
congested
for that cell
Bronze-levelthe becomes
state. GBR
BTS3900, BTS3900 MOD CELLRACTHD congestion
parameter
GBR
higher services
than isrelief
the(exceptsum of
scheduling
services. When algorithm NO
LTE LST CELLRACTHD offset,
expressed the services
VoIP
this
providesthreshold
congestion forin
services) and
Silver-
occurs,
is the the
the
with
product QCI
percentage
congestion
levelthat GBR ofof services the
GBR3andleave
relief and
BTS3900, BTS3900 MOD CELLRACTHD rate
congested
applies
this tothe
proportion. state.
both uplink
offset,
(except theVoIP services
services) NO
LTE LST CELLRACTHD scheduling
and downlink. algorithm
If the
with
is the
provides QCIproductof 4
fordetects leave
of
Bronze- thethe
MAC
congested
GBR layer
and state.
this that
BTS3900, BTS3900 MOD CELLRACTHD level GBR services
the resource
proportion. usage by NO
LTE LST CELLRACTHD (except VoIP services)
GBR services exceeds
is
thethe product of
threshold, theGBR
and this proportion.
usage is high. In this
situation, new GBR
services are not
admitted if
GbrUsageSwitch
Indicates the threshold
for low resource usage
by guaranteed bit rate
(GBR) services.
Indicates the This
Indicates
parameter
congestion the isrelease
Allocation
expressed
offset. Theand in
service of a
BTS3900, BTS3900 MOD CELLRACTHD Retention
percentage
specific QCI Priority
and
exits the
(ARP) NO
LTE LST CELLRACTHD appliesthreshold
congestion to both stateuplinkfor
if the
low Energy
and downlink.
satisfaction Efficiency
rate If the
of the
BTS3900, BTS3900 MOD CELLRACTHD Ratio
MAC
service (EER)
layerexceeds services.
detects thethat NO
LTE LST CELLRACTHD If
the
sumthe ARP
resource
of this value usage
congestion of aby
Indicates
service is the
less and thanthe the
GBR services
release offset falls
BTS3900, BTS3900 MOD CELLRACTHD Allocation
value of this and
below
congestion
Indicates
Retention thethe threshold,
threshold
Prioritythreshold NO
LTE LST CELLRACTHD parameter,
the usage is thelow. service
for
(ARP)the
decidingQCI.
threshold The
on for
will not
service
whether be
retains
the ULreleased RB for
the
BTS3900, BTS3900 MOD CELLRACTHD preemption.
congestion The
control.
Indicates
congestion
usage is thatthe
high. threshold
state This if the NO
LTE LST CELLRACTHD services have
for high
satisfaction
threshold
ARP values downlink
applies largerRB
rate is to UL
BTS3900, BTS3900 MOD CELLRACTHD usage.
below
admission This
than or equal totothe
or equal parameter
decision. theIf
is
sum usedof for
this downlink
congestion NO
LTE LST CELLRACTHD the UL
Indicates
value of this RB usage
theparameter
threshold
admission
release
reported
for
aredeciding
preemptible.bydecision.
offset onand
the MAC the If
BTS3900, BTS3900 MOD CELLRACTHD the
layer downlink
congestion
whether is abovethe RB
threshold
UL thisusage
RB
Indicates thethe threshold NO
LTE LST CELLRACTHD reported
for the is
threshold,
usage QCI. by
low. the ItUL MACRB
applies
for
layerlow downlink
isadmission
greater RB
than
usage
to UL
usage. is
Thisassumed parameter to
BTS3900, BTS3900 MOD CELLRACTHD the
be value
high. of this
decision.
is used forIf downlink the UL RB NO
LTE LST CELLRACTHD parameter, the
usage
Indicates
admission reported
the by the
maximum
decision. If
downlink
MAC
number layer ofRB is
non-GBRusage
below is
BTS3900, BTS3900 MOD CELLRACTHD the
high. downlink RB usage
this threshold, NO
LTE LST CELLRACTHD bearers
reported by thethe
(excluding MAC UL
RB usage
bearers of
layer is less than the is
IP assumed
BTS3900, BTS3900 MOD CELLRACTHD to be low.
Multimedia
value of thisSubsystem
Indicates the value NO
LTE LST CELLRACTHD [IMS]
parameter, services) the that by
MOD which
can bethe
Indicates
downlink reference
provided
the
RB stopbytime
usage ais
Indicates the start time
BTS3900, BTS3900 CELLRFSHUTDOWN signal power
cell.
of
low.theThis
RF
Indicates
of channel
cell RFis
parameter
the number
channel NO
LTE LST increased
applies
emptytosymbols
intelligent
of during
both
shutdown the
uplink
in foran
MOD intelligent shutdown.
CELLRFSHUTDOWN RF
and
the channel
downlink.
cell. If
uplink pilot timeslot the intelligent
stop
BTS3900, BTS3900 CELLRFSHUTDOWN shutdown
LTE LST
time is earlier
(UpPTS). Ifperiod.
this thanThe or NO
reference
the same as
parameter signal
is the power
set start
to a
MOD
CELLRFSHUTDOWN increases
time,
non-zero the stop by the
value N,value
time is
then
BTS3900, BTS3900 CELLRFSHUTDOWN Indicates whether to
specified
assumed
no data is by
to this
be
transmitted a time NO
LTE LST empty the last symbol
parameter
of the next
within the Nto day. ensure
symbols
CELLRFSHUTDOWN in each uplink
BTS3900, BTS3900 MOD CELLRICALGO coverage
starting fromof the thecell.
first If
subframe.If
this parameter this is set to NO
LTE LST CELLRICALGO symbol
parameter in the UpPTS.
is setthan to 3,
a value
Note that, greaterforlast any
ON(On),
the value the
3 applies in
BTS3900, BTS3900 MOD CELLRICALGO given special subframe
symbol
effect. in each
Otherwize,the uplink NO
LTE LST CELLRICALGO configuration, the
MOD subframe
Indicates
configuration is emptied.
the start
valuetime time If
Indicates
value
this of this
parameter theparameter
stopis set to
BTS3900, BTS3900 CELLSHUTDOWN of
of intelligent
applies
intelligent
cannot
Indicates in the
be effect. power-off
power-off
greaterdownlink than
OFF(Off), the lastsame NO
LTE LST of
of
the
PRB carriers
carriers
total
offset in
in
number forthe
the same
of
MOD
CELLSHUTDOWN symbol
coverage. in each uplink
coverage.
symbols
subframecontained
stopping isIf not
the stop
intelligent in
BTS3900, BTS3900 CELLSHUTDOWN
time is earlier
the UpPTS.
power-off
Indicates
emptied. of carriers
the than orin
downlink NO
LTE LST
MOD the
PRBsame threshold as
coverage thefor start for
CELLSHUTDOWN
BTS3900, BTS3900 CELLSHUTDOWN time,
starting intelligent is
the the
cell. stop
The time
downlink
Indicates
assumed the
to uplink NO
LTE LST PRB
power-offthreshold of be a timein
for
carriers
MOD PRB
of the
stopping offset
next for
day.
intelligent
CELLSHUTDOWN the same
stopping coverage
intelligent for
BTS3900, BTS3900 CELLSHUTDOWN power-off
the cell. of carriers in
power-off
Indicates of carriers in NO
LTE LST the same the coverage uplink for
MOD
CELLSHUTDOWN the
PRB same
the cell threshold coverage
is equalfor to the for
BTS3900, BTS3900 CELLSHUTDOWN the
sumcell.
startingof the Thedownlink
intelligent uplink
PRB NO
LTE LST PRB threshold
power-offthreshold of carriers for
for in
MOD
CELLSHUTDOWN stopping
the intelligent
starting intelligent for
same coverage
BTS3900, BTS3900 CELLSHUTDOWN power-off
the cell. of
power-off of carriers
carriers in in NO
LTE LST the
the same
same coverage
coverage for
LST
CELLSHUTDOWN Indicates
the cell is the
equal local ID
BTS3900, BTS3900 CELLULICICMCPARA and
of thethe
Indicates value
cell. the of tothis
interval
Ituplink
uniquely
the
sum of
parameter. the PRB YES
LTE MOD between
thresholdperiodic
identifies afor cell within a
starting
MOD
CELLULICICMCPARA measurement
BS.
intelligent power-off of reports
BTS3900, BTS3900 CELLULICICMCPARA that are in
carriers sent theafter same a UL
NO
LTE LST ICIC measurement
coverage and the
CELLULICICMCPARA event
value of is triggered.
this For
details,
parameter. see 3GPP TS
36.331.
after a UL ICIC
measurement event is
triggered, which can
be set to
Indicates the maximum
SAME_AS_TRIG_QU
Indicates
number
AN or BOTH. ofthe cells switchto be
MOD that
included
The is used
valuein each to control
BTS3900, BTS3900 CELLULICICMCPARA whether
measurement
SAME_AS_TRIG_QU to enable report or
Indicates
disable UL the number
quantity
adaptive NO
LTE LST after
AN
of
used ainUL
indicates
periodic ICIC that the
MOD
CELLULICICMCPARA HARQ.
measurement
quantity Ifthe this evaluation
switch
event is is
BTS3900, BTS3900 CELLULICICMCPARA of atoUL ICIC included
measurement
set
to be reports
triggered.
is theasame
after
measurement UL ICIC For details,
asevent.that NO
LTE LST ADAPTIVE_HARQ_S
see 3GPP
specified byTS the 36.331.
MOD measurement
The
W_OFF, quantity UL data be canevent is is
CELLULICICMCPARA TriggerQuantity
BTS3900, BTS3900 CELLULICICMCPARA triggered.
RSRP
Indicates
retransmitted or For
RSRQ.
the details,
time-to-
byvalue The
non-
parameter.
see
measured
trigger 3GPP TSThe
RSRP
forsynchronous
the 36.331.
UL ICIC NO
LTE LST adaptive
Indicates the
MOD BOTH
values
measurement indicates
are stable, event.that
CELLULICICMCPARA HARQ.
hysteresis If this switch
for theRSRQ ULis
BTS3900, BTS3900 CELLULICICMCPARA both
varying
When RSRP littleand
detecting withthat the
set
ICIC
values to measurement
arequality included. NO
LTE LST load,
the and
signal
ADAPTIVE_HARQ_S
event. Thistherefore parameter in the
MOD
CELLULICICMCPARA The
there
serving measured
is to little
cell andsignalRSRP
that in
W_ON,
is used
values UL
are data
decrease
stable, is
BTS3900, BTS3900 CELLULICICMCPARA Indicates
fluctuation.
at least
retransmitted one the The offset
by the for
frequent
varying triggering
little with of NO
LTE LST the ULevaluations
measured
neighboring
adaptive ICIC RSRQ cell
synchronous meet
MOD event
load, and therefore due
CELLULICICMCPARA measurement
values
the
HARQ. entering vary thiswith
Iflittle event.
condition,
switch the isIf
BTS3900, BTS3900 CELLULICICMCPARA to radio
there is signal signal
this
load
the
set parameter
and
UE does For
to
fluctuations. are is
likely
not send set to to NO
LTE LST fluctuation.
a large
reflect value,
the The
signal the
MOD a measurement
ADAPTIVE_HARQ_S
details, seeRSRQ 3GPP TS report
CELLULICICMCPARA measured
signal
quality quality
of the of the
cell in
BTS3900, BTS3900 CELLULICICMCPARA to the eNodeB
W_SEMION,
36.331. adaptive
values
neighboring
real time.
immediately. vary with cell
Instead, the
must NO
LTE LST HARQ
load and is triggered
are likely to
MOD be
the
when significantly
UE
Indicates athe sends
ULwhether grant abetter
report
is
CELLULICICMCPARA Indicates
reflect thesignal target
BTS3900, BTS3900 CELLULSCHALGO than
only
delivered
frequency that
when of thethe
tohopping
an serving
signal
HARQ
IBLER
quality
cell before of the a UL SINR
cell in
ICIC NO
LTE LST quality
process
(FH)
adjustmentis continuously
that
enabled is
algorithm. or
MOD real
meets time.
measurement theand Forentering details,
eventFH is
CELLULSCHALGO previously
disabled
A
seegreater
3GPP suspended
parameter
TSratiowhich
36.331.
BTS3900, BTS3900 CELLULSCHALGO Indicates
triggered.
condition
due to
type isindicates
Indicates reasons
used. the
For
during
the UEa details,
the
such of
value
the
see maximum
3GPP TS 36.331. NO
LTE LST time-to-trigger.
as resource
Hopping_OFF:
number threshold collision, for
MOD greater
bandwidth SINR resources
CELLULSCHALGO Indicates
activation
indicates
the E-UTRAN the
of
that a minimum
FH
cell isto
BTS3900, BTS3900 CELLULSCHALGO adjustment
that the uplink value, and
Indicates
In inter-RAT
interval
measurement
disabled.
enter
thus the between
a higher-level the
inter-RAT cellgap, two co- NO
LTE LST scheduler
percentage
shutdown,
pre-allocations.
and PDCCH
Hopping_Type1:
coverage can
cellthe
of allocate
free
eNodeB
That
MOD
CELLULSCHALGO MCS
to is used. UEs to
preallocation
shared
automatically
is, the actual
congestion.
indicates
shutdown. RBs on
thatSetting hands
the
interval
adaptive
BTS3900, BTS3900 CELLULSCHALGO the
PUSCH
over total
or system
redirects
in scheduling
LTE LST
between
thisinter-RAT
FH
In parameter
is enabled two pre-
cell totheFH
and NO
bandwidth.
based
UEs in is
allocations
ADAPTIVE_HARQ_S
type
shutdown, 1 on
the free
used. E-UTRAN
of one
the users
eNodeB
In this UE
MOD
CELLULSCHALGO Indicates
and
cell
must
W_ON to
scenario,subscribers.
be
automatically ahelps the
co-coverage
longer
UEsreduce data
inthan
hands Theor
the
BTS3900, BTS3900 CELLULSCHALGO
amount
other
neighboring
equal
resource
cell
over can
or RBs pre-allocated
toredirects
the onUTRAN
determine thethe
value
consumption of NO
LTE LST
MOD to
this
due each
PUSCH
cell
whether
UEs when
parameter.
to
in the user.
are related
retransmission,
to E-UTRAN allocated
use FH
CELLULSCHALGO
BTS3900, BTS3900 CELLULSCHALGO to
conditions
subscribers.
increase
based
cell the
to aonco-coverage arecell
the met:
When
actual (1)
sufficient
The inter-RAT
throughput, capacityand cell is NO
LTE LST situation.
neighboring UTRAN
MOD
CELLULSCHALGO available,
shutdown
prevent
Indicates
Hopping_Type2:
cell when
Indicates the
switch
retransmission
the
related
the datais
threshold
BTS3900, BTS3900 CELLULSCHALGO percentage
enabled,
conflicts.
for the that
indicates
conditions
length number the
This,
thatareof RBs
on
of the
adaptive
met:
thecapacity
UL (1)
Indicates the NO
LTE LST occupied
ShutDownType
other
consecutive hand,
FH isinter-RAT
The
scheduler enabled by free
will
zero-
assigns cellusers
and FH
to
MOD
CELLULSCHALGO factor
Indicates
and
parameter
increase
payload
type
shutdown that
2 for uplink
is packetsthe
occupied
is set
signaling
used.
switch duration
Into by
isthis
UEs
enhanced that have sent
proportional
BTS3900, BTS3900 CELLULSCHALGO of uplink
subscribers
BY_UTRAN_WITHOU
overhead
received
scenario,
enabled, smart
by and
the
UEs will
the in reach
the
scheduling requests. NO
LTE LST fair (EPF)
preallocation
the
T_LOAD,preset
therefore
eNodeB.
cell
ShutDownType
canthe scheduling.
the
values.
After
consume
determine triggered
MOD Within
When the data
eNodeB length,
CELLULSCHALGO by downlink
Changes
shutdown
more
receiving
whether
parameter PDCCH inconditions
this
toconsecutive
is
use setFH to
BTS3900, BTS3900 CELLULSCHALGO the UEs
schedules reports
UEs their
with
scheduling.
parameter
including
resources.
zero-payload
based status
BY_UTRAN_WITHOU
buffer on the the Ifand
affectspecified
packets
actual the NO
LTE LST unsatisfied
SmartPreAllocationSwi
percentage
inter-RAT GBR,
cellof RBs this for
MOD of a
T_LOAD,
transmit number
situation. the
certain that is
data.
CELLULSCHALGO factor
tch
free is
shutdown usersaffects
set to On
duration
and the and
thatof and
for
BTS3900, BTS3900 CELLULSCHALGO equal
shutdown to the
Hopping_Type2_RAN value
conditions
scheduling
this parameter
subscribers.
the number
Indicates
this
DOM: parameter,
including indicates the priorities
ofThe is
UEs
start the
specified set
value
that time of
to NO
LTE LST Indicates
UEs running the services
stop time
MOD 0,
of neither
served
this
inter-RAT
eNodeB
random
inter-RAT
of inter-RAT parameter
by smart
the
performs
FH cell cell
iscell E-
enabled
CELLULSCHALGO with thebe QCI of 1, 2,and3,
BTS3900, BTS3900 CELLULSCHALGO preallocation
cannot
UTRAN
shutdown.
implicit
and FH
shutdown
shutdown. cell
release
type changed
If are
duration
If 2 nor
the
the isofmet,
switch
used.
stop
or 4. When
preallocation
when
and uplink the takes NO
LTE MOD
LST for
timethis
eNodeB isthe
inter-RAT
semi-persistent
In
uplink and
scenario,
earlier celland
downlink
schedules
is
cell
than active.
all or
INTERRATCELLSHUT
CELLULSCHALGO effect.
downlink
shutdown
resources.
UEs
resource
the in
same If
the resource
is
blockcell
as the turned use
(RB)
start on,
FH.
BTS3900, BTS3900 DOWN UEs
block
inter-RAT
usages running
SmartPreAllocationSwi
(RB) instop usages
cell
the Non-GBR
E- in
time,
services, the this time
factor is NO
LTE MOD
LST tch
the is
shutdown
UTRAN setcell
E-UTRAN to can Off,
are cell
be this
met, are
assumed
affects the to be
scheduling the
INTERRATCELLSHUT
INTERRATCELLSHUT parameter
less
performed
and than
the or
number is
duringinvalid.
equal of to If
the
time
prioritiesof the of next UEs day.
BTS3900, BTS3900 DOWN
DOWN the
period
UEs UlPrbThd
servedspecified by and theby the
E-
MOD the
runningswitch servicesfor inter- with NO
LTE LST DlPrbThd
start
UTRAN time cell parameter
and is stop
less
INTERRATCELLSHUT RAT
the QCIcellof shutdown
6, 7, oris9.
INTERRATCELLSHUT values,
time
than
turned of
oron, respectively.
inter-RAT
equal inter-RATto 8, thiscell
BTS3900, BTS3900 DOWN
DOWN In
(2) this
The
shutdown. way,inter-RAT this factor cell
MOD parameter
cell shutdown value. can be NO
LTE LST can
shutdownbe used switch to adjust
is
INTERRATCELLSHUT (2) The inter-RAT
performed during cell
the
INTERRATCELLSHUT the cell capacity
enabled, the and
BTS3900, BTS3900 DOWN shutdown
period specified switchby is the
DOWN fairness
ShutDownType among UEs. NO
LTE LST enabled,
start time and stop the
parameter
ShutDownType
time of inter-RAT is set tocell
INTERRATCELLSHUT
BY_UTRAN_WITH_L
parameter
shutdown. is set to
DOWN
OAD or
BY_UTRAN_WITH_L
BY_UTRAN_AND_GE
OAD or
RAN_WITH_LOAD,
BY_UTRAN_AND_GE
the shutdown
RAN_WITH_LOAD,
conditions
the shutdown including
and uplink and
downlink resource
block (RB) usages in
the E-UTRAN cell are
Indicates
less than the or equal switch to
used to
the UlPrbThd andenable or
MOD disable theparameter
TDM-
DlPrbThd
INTERRATCELLSHUT based enhanced inter-
values, respectively.
BTS3900, BTS3900 DOWN cell interference
(2) The inter-RAT cell NO
LTE LST Indicates
coordination
Indicates whether
the (eICIC)
switch to
MOD shutdown switch
high-oris
INTERRATCELLSHUT enable
function.
used to the If
enable this
BTS3900, BTS3900 CELLALGOSWITCH enabled,
Indicates the
the
mobility-triggered-idle G factor
DOWN parameter
disable radio is set linkto NO
LTE LST ShutDownType
threshold
switch. When for user
this
MOD ON,
failure the(RLF)
parameter
Indicates TDM-based
is
whether detection
set toto
CELLALGOSWITCH attribute
parameter determination
BTS3900, BTS3900 eICIC
CELLALGOSWITCH for links. is to
function
ULMRC/IRC
BY_UTRAN_WITH_L
apply
is set
in downlink
ENABLE,IfUEs adaptive in high NO
LTE LST enabled.
OAD
adaptationor are this
toreleased
the
Inter-Cell
mobility
parameter Interference
is set to
MOD BY_UTRAN_AND_GE
CELLALGOSWITCH PUSCH.
Coordination
and
OFF, enter
the the (ICIC).
TDM-based idle If
BTS3900, BTS3900 CELLALGOSWITCH RAN_WITH_LOAD,
downlink adaptive
LTE LST
mode,
eICIC
the
and
function
shutdown
therefore is ICIC NO
MOD is
theenabled,
signaling
disabled. Inincluding the
a impact on
CELLALGOSWITCH conditions
BTS3900, BTS3900 CELLALGOSWITCH eNodeB
the network
heterogeneous
the specified
selects caused cell by
inter-RAT
edge
frequent users (CEUs)
handovers NO
LTE LST network
cell shutdown (HetNet), duration,this
CELLALGOSWITCH from
MOD are
Indicates
function
the
the is
reduced.
number
users
theused When whose
switch
BTS3900, BTS3900 G
CELLALGOSWITCH used factors
this parameter
together toby areofthe
enable
with
UEs
lessis
orset than
range to
served
this threshold.
Indicates
DISABLED, the
the UEs E-
switch in NO
LTE LST disable
expansion
UTRAN the
cell, DL
function of CoMP
MOD Determine
CELLALGOSWITCH used
highmicro
Indicates to enable
mobility
algorithm.
the the theare
base band ornot
station
BTS3900, BTS3900 allocation/retention
CELLALGOSWITCH parameter
disable
released. the value
parallel based soft
division
Indicates
to expand scheme
thethereference used NO
LTE LST priorities
on the
interference (ARPs)
distribution ofof
in downlink
signal
coverage received oftheICIC.
small The
power
services
CELLALGOSWITCH Indicates
UEs' inthe
modulation
cancellation (PSIC) E-
local and ID
band
(RSRP)
cells, division
and threshold
increase in the forthe
BTS3900, BTS3900 LST CELLDLICIC UTRAN
of the
coding
algorithm cell,
cell.
scheme It
inusers and
uniquely
anoise- load
(MCS)
cell.
cell
number is adjusted
determining of YES
LTE MOD CELLDLICIC status
identifies of the
atocell within
indexes
according
afflicted
absorbed
neighboring
within
UEs byUTRAN the an
(that
the is, a
area
small
BS.
so that
setting
UEs about
of
thatsupportthis
are and one
mainly third
BTS3900, BTS3900 MOD CELLDLICIC cell.
cell To
are met, TDM-
users
parameter
affected
based are by
eICIC, determined
sonoise) that the
this NO
LTE LST CELLDLICIC uplink
to be CEUs. and downlink For
edge
within
function bands
a network.
must for be If all
resource
example, block
if an (RB)
area
BTS3900, BTS3900 MOD CELLDLICIC neighboring
RSRP values
enabledinforthe cells
both of dois
the
usages
covered by 155 E-cells NO
not overlap.
neighboring
macro and If
cellsthisbase
LTE LST CELLDLICIC UTRAN
and cellsmall
the percentages are less of
parameter
included
stations. in is
A3 set to
reports
than
users or equal
whose to the
BTS3900, BTS3900 MOD CELLDLICIC INVALID,
sent by a the MCS
UE cell less
are does
UlPrbThd
indexes are and less than NO
LTE LST CELLDLICIC not distinguish
than this threshold, center the
LST DlPrbThd
6 and
Indicates 7 are parameter
the aboutlocal 30% ID
and
event edgeA3 bands.
is not
BTS3900, BTS3900 CELLDLPCPDCCH values,
and
of the 40%, respectively.
cell. respectively,
Itinuniquely
considered
Indicates
After all UEs the offset
in the E- of YES
LTE MOD you can
identifies
interference
the DCI seta
power this
cell within a
relative
MOD UTRAN
parameter celltoare
CELLDLPCPDCCH BS.
calculation.
to the reference
transferred In1.
to
(The
general
the signal G
BTS3900, BTS3900 CELLDLPCPDCCH factors
scenarios, corresponding
the
power when UTRAN
neighboring the NO
LTE LST to MCS indexes
recommended 6 andof
value
LST PDCCH
cell, the
Indicates channel
eNodeB
the local shuts
ID
CELLDLPCPDCCH 7 are
this 0.5
parameter dB and is of1.45
-102.
BTS3900, BTS3900 CELLDLPCPDSCH carries
down
of the thededicated
cell. carrier
It uniquely the
dB,
In respectively.)
tests foracell. small-scale The YES
LTE MOD control
E-UTRAN
identifies information.
cell within a
G factors this
networks,
MOD
CELLDLPCPDSCH Indicates
BS.
corresponding the PA to value
BTS3900, BTS3900 CELLDLPCPDSCH parameter
of cell center canUEs setMCS to
Indicates
indexes 0the to 28 weightare –of NO
LTE LST other
when values.
DL ICIC is –
the
5.65, non-P2P
–4.5, –3.55,service
MOD
CELLDLPCPDSCH enabled.
used in enhanced
Indicates
2.35, –1.5,the –0.5, PA 0.5, value
BTS3900, BTS3900 CELLDLPCPDSCH proportional fair3.7, (EPF)
of cell2.45,
1.45, edge3.4, UEs when NO
LTE LST
LST scheduling.
DL ICIC
4.4, 5.4, 6.3,
Indicates is the The
enabled.
7.25, ID value8.3,
CELLDLPCPDSCH Indicates
of this the local
parameter power is
BTS3900, BTS3900 CELLDLPCPHICH 8.95,
of the 9.6,
cell. 10.15,
It uniquely
offset
used inbetween
calculating the the YES
LTE MOD 11.15,
identifies 12.1, a cell 13.15, within a
PHICH of
priority transmit(TX)
a UE
MOD
CELLDLPCPHICH 14.05,
BS.
Indicates 15.1, the 16,during 17,
power
scheduling and the
and
BTS3900, BTS3900 CELLDLPCPHICH 18.1,
proportion19, and of 20.1,
reference
therefore signal(RS)
determines NO
LTE LST respectively.
resources reserved
MOD power.
the amount of This offset physical isfor
CELLDLPCPHICH non-GBR services. A
BTS3900, BTS3900 CELLDLSCHALGO used when
resourcesthe PHICH
to be
Indicates
proportion
power control ofthe maximum
is UE NO
LTE LST allocated
number to
of is layers (the
MOD
CELLDLSCHALGO resources
disabled.
that requests reserved
the non-
rank) in
periodically the toThe prevent
BTS3900, BTS3900 CELLDLSCHALGO P2P service.
implementation
Indicates
non-GBR the
services of
capacity NO
LTE LST priority of downlink
the non-P2P
MOD multiple-input
factor
from for
failing to multiple-
be
CELLDLSCHALGO service hasproportional
a positive
BTS3900, BTS3900 CELLDLSCHALGO output (MIMO)
enhanced
allocated resources. in DL
correlation
scheduling.
fair (EPF) with
scheduling. the NO
LTE LST During
value of thethis periods
MOD
CELLDLSCHALGO This
when factor
resources affects the
BTS3900, BTS3900 CELLDLSCHALGO parameter.
scheduling This are of
priorities
reserved,
parameter resources
is services
valid only NO
LTE LST UEs
are running
scheduled
CELLDLSCHALGO when
with the
the QCI of service 6,non-7, 8,
preferentially
differentiation for
function
or
GBR 9, andservices. accordingly If this
is
canenabled.
be used
parameter is to setadjustto 0,
the
resources are notand
cell capacity
fairness
reservedamong for non-GBR users.
services.
and
block (RB) allocation
ratio threshold for the
MlbMinUeNumOffset
mode forofcell
function edge
lowering
parameter
users (CEUs) values and
the modulation
Indicates
the PRB the when
usage
and
of the
downlink
coding scheme
scheduling ICIC policy is (MCS)used
cell is
enabled.
index to greater If
increasethis than the or
when
equal downlink
to the sum ICIC the is
parameter
number
enabled. is
ofIf resource
this set to
MOD InterFreqMlbThd
ALL_EDGE_USER,
blocks (RBs) withto and
parameter
LoadOffset isparameter
set
BTS3900, BTS3900 CELLDLSCHALGO RBs in the
priority for UEs running
EDGE_USER_NO_PR current
values.
transmission Inter-frequency time NO
LTE LST services
IO, both cell withcenter small
MOD
CELLDLSCHALGO load
interval
packets. balancing (TTI)
The are is firstly
value 0of
users
Indicates
triggered (CCUs) the
if the and
period
number cell
BTS3900, BTS3900 CELLDLSCHALGO allocated
indicates
edge
the users
inter-cell to (CEUs)
that cell the
load center
Indicates
of synchronized the threshold UEs in NO
LTE LST users
Indicates
function
can (CCUs)
preempt ofthe and
threshold
lowering
edge then
MOD exchange.
for
the triggering
cell is This
greater intra- than
CELLDLSCHALGO allocated
of
the UE
bands, MCS physical to
index
thereby all CEUs.
is
BTS3900, BTS3900 CELLDLSCHALGO parameter
frequency
or equal to is
load
the contained
sum of
If this
resource
disabled.
improving parameter block
The
CCUs' (PRB)
value is set NO
LTE LST in
the the
balancing. load
MlbMinUeNumThd exchange
Intra-
to
usage
100 inmessage.
indicates load If
CELLDLSCHALGO
performance.
request
frequency
and
PART_EDGE_USER, loadthat thistheIf
balancing.
function
parameter
the source is (1)
always
is
cell setIfsends
the
to
BTS3900, BTS3900 MOD CELLMLB balancingin theiscurrent
MlbMinUeNumOffset
RBs startedTTI if a
MlbTriggerMode
enabled.
EDGE_USER_PRIO,
load exchange request NO
LTE LST CELLMLB the cell
parameter load exceeds
values
are
CCUs
messagefirstly
parameter
Indicates are allocated
is set
scheduled
containing
the toand toa
the
CCUs sum
PRB
Indicates and of the thethreshold
valuation
then offset inof
BTS3900, BTS3900 MOD CELLMLB PRB_ONLY,
at both
period,
of PRB the
usage center
targetthe cell
threshold
the cell
allocated
the number is and
greater
to of
the the CEUs than NO
LTE LST CELLMLB eNodeB
band
reports
difference and selects
itstotheload
between edge UEs
to the the
offset,
or
to equal
synchronized
which and RBs is
thestopped
have
UEssum forof
not
for
band
sourceload
serving only balancing
cell
cell after
atand CEUs
intervals
a on
if
thethe
been cell
PrbValMlbTrigThd
triggering allocated load
inter- falls
within
BTS3900, BTS3900 MOD CELLMLB the
have UEs
Indicates
based
neighboringbeenonwhose the
the scheduled PRB
standard
period.
cell. When If
below
and
this
frequency
TTI. the
LoadOffset threshold.
load NO
LTE LST CELLMLB usage
at
valid
the the in
edge
duration
sourceofvalues.
result the cell downlink
band,
the forsends
PRB and
load
parameter
balancing.
(uplink) that User-triggers
therefore
sharing
such
usage
Inter-RAT a of with
messageCEUs'
theload universal
serving
sharing
BTS3900, BTS3900 MOD CELLMLB number-based
load balancing
performance
terrestrial
without a radio
period, inter-
is
improves.
access
the
cell
is minus
triggered
frequency that
loadif the of a NO
LTE LST CELLMLB greater
Indicates
network
target cellthan the
(UTRAN)
reports this
control for
its
neighboring
number
balancing of isvaluecell
triggered is
parameter
factor
UEs
load
greater in
to foridle
the
than the mode.
sourceamount
the but The
cell
BTS3900, BTS3900 MOD CELLMLB synchronized
if UEs in
LTE LST CELLMLB atthe
PRB
of
the
a
acell number
usage
single
Indicates
actual default
parameter duration
is the load of
inmaximum
thethis
interval
value,
greater than of NO
synchronized
uplink
transfer.
number
increases
5s. (downlink)
ofThe UEs
on UEs
value
the that isinof
basis
neighboring
or
the equal to the cell sumcan of
BTS3900, BTS3900 MOD CELLMLB
less
this
can
of
be
the aacell
than
parameter
be
standard
target
is thisgreater
transferred cell has
valid
for
than an
to
or equalonto
parameter
impact
inter-frequency
duration with thethe
value.
the sum (2)ofIf NO
LTE LST CELLMLB mobility
InterRatMlbUeNumThd load balancing
the MlbTriggerMode
efficiency
neighboring
increase
(MLB). of MLB
cells
of the number
and
InterFreqMlbUeNumTh
parameter
algorithm and is set theto
BTS3900, BTS3900 MOD CELLMLB within
of a load
uplink-synchronized
InterRatMlbUeNumOff balancing
d and under
UE_NUMBER_ONLY,
algorithm
period
UEs. to prevent different NO
LTE LST CELLMLB set parameter values
MlbUeNumOffset
the eNodeB
ping-pong
trigger conditions.load selects This
and the
parameter
UEs
transfer.for load PRB values.usage
balancing of
BTS3900, BTS3900 MOD CELLMLB parameter
the cell is is
greater used to
than
User-number-based
on the UEs whose NO
LTE LST CELLMLB prevent
Indicates
or
Indicates
equal too
tothe
the many
the CCE UEs
inter-frequency
PRB
from usage
being is load to
equal
transferred
percentage
InterRatMlbThd
ratio
balancing adjustment toof the
transfer and
switch
BTS3900, BTS3900 MOD CELLMLB or
to less than
inter-frequency
number of this
virtually
LoadOffset
for the
to-be-released PDCCH. parameter UEsIf this isIf NO
LTE LST CELLMLB parameter
neighboring
loaded PDCCH value.
cells CCEs (3)
MOD values.
switch
triggered
the isInter-RAT
MlbTriggerMode turned
if the on,
number load the
within
Indicates
when
sharing
resource a to
the loadthe
PDCCH
allocation
transferbalancing
CCE to-
BTS3900, BTS3900 CELLPDCCHALGO of synchronized
parameter
process and islevelset
the UEs
tofor is
load in
aggregation
power
be-released
algorithm
Indicates control of
the UEs
the switch
upper is NO
LTE LST the cell
PRB_OR_UE_NUMBE
in is
inter-frequency greater than
MOD common
turned
triggered
PDCCH
limit forloadoff, signaling.
if or the
dynamically
the CCE indicates
number
usage
CELLPDCCHALGO or
R equal
and
neighboring to the
balancing
cells sum from of
BTS3900, BTS3900 CELLPDCCHALGO the
of
adjusts
within
the percentage
synchronized
eachthe UL of
andUEs the DLis
is triggered
increasing
power ofthan by the
significantly.
virtually NO
LTE LST greater
CCE ratios
transmission
InterFreqIdleMlbUeNu
PRB usage, or
within
time
the equal each
MOD
CELLPDCCHALGO loaded
to the
transmission
interval
mThd and sumPDCCH
(TTI). of the
time
When CCEs
BTS3900, BTS3900 CELLPDCCHALGO eNodeB
when the selects
PDCCH UEs
InterRATIdleMlbUeNu
interval
the
for switch
MlbUeNumOffset
load (TTI) forbasedinon
balancing NO
LTE LST power
mThd
CCE
dynamically
parameter control
and
usages inswitch
ULthat
adjusting
values. and is
MOD
CELLPDCCHALGO the
turned same on. way This as
InterRatMlbUeNumOff
DL.
the
when If
numberthis
the isofusedswitch OFDM is
BTS3900, BTS3900 CELLPDCCHALGO parameter
set
turned parameteroff, the values
UL and to
symbols
Indicates
MlbTriggerMode onthe the threshold NO
LTE LST analyze
and
DL CCE
the the
PRBratios impact
usage
are ofof
not
LST PDCCH
for the lowthe
parameter
Indicates is turned
load
is set
local state
toIDon,
CELLPDCCHALGO the parameter
dynamically
cellSRI is greater values
BTS3900, BTS3900 CELLPUCCHALGO the
of parameter
the
PRB_ONLY.
on PDCCH cell. It adjusted.
resources. thethan
If setting
uniquely
or
is
The equal
invalid,
SRI
MlbTriggerMode to that the
resources sum
is, theofa YES
LTE MOD identifies
demodulation a cell within
MOD
CELLPUCCHALGO the
CCE
enter InterRatMlbThd
parameter
Indicates
BS. usage
the low the iswithinloadto
set
time
BTS3900, BTS3900 CELLPUCCHALGO performance
and
each
state LoadOffset
ifTTI thecannot PUCCH and be
PRB_OR_UE_NUMBE
when
provide the cell
reference no-traffic to NO
LTE LST
LST parameter
limited.
resource
R
detection
and load This values.
allocation
starts. parameter
balancing If the
CELLNOACCESSALM
CELLPUCCHALGO intra-frequency
Indicates
is valid
Indicates
algorithm only the
the
detects inlength
local
timeTDD IDof
is
stoptriggered
time
networking is by
earlier
in thethat
LTE.
BTS3900, BTS3900 PARA the
of
mode.
when
the
number
than timer
the cell.
orthe
number offor
the cell the
Itsame
ofuniquely
activated cell
no-traffic as
MOD no-traffic detection. If a YES
LTE MOD identifies
detection
admitted
UEsstart
the in the astops.
UEs
time, cellis
serving within
the If endthe
cell,
CELLNOACCESSALM
CELLNOACCESSALM there
BS.
stop
smaller timeis no
than traffic
is earlierthe value in the
the eNodeB
time is assumed selects to be
BTS3900, BTS3900 PARA
PARA cell
than within
orparameter. the duration
MOD of
UEs
a this
time for ofthe
loadthe samebalancing
next as
day. NO
LTE LST specified
the start by
time, this the stop
CELLNOACCESSALM in the
If the timer samefor way as
CELLNOACCESSALM parameter,
time is assumed the to be
BTS3900, BTS3900 PARA that whenthe
reporting theno-traffic
PARA eNodeB
a time isofnot reports
theset next the day. NO
LTE MOD
LST MlbTriggerMode
alarm to 0,
no-access
If the
parameter
the timer is
eNodeB alarm
for performs
set to and
CELLNOACCESSALM
CELLNOACCESSALM resets
reporting
UE_NUMBER_ONLY.
the the
cell no-traffic the cell. If
no-trafficthis
BTS3900, BTS3900 PARA
PARA parameter
alarm
detection is not fromisset set thetoto0, 0,
start NO
LTE LST
the
timecell
the eNodeB
to the no-traffic stopperforms time.
CELLNOACCESSALM
detection
the cell no-traffic is not
PARA
performed.
detection from If the thetimer start
for
timereporting
to the stop the time. no-
traffic alarm is set to a
non-zero value, the
eNodeB performs the
Indicates the index of
a simulated load
Indicates the band
configuration. One
division
eNodeBscheme can store useda
in uplink
maximum of 10 ICIC. The
Indicates
band division
simulated the
loadlocal in theID
BTS3900, BTS3900 LST CELLULICIC of the cell.
cell is changed They
configurations. It uniquely
Indicates YES
LTE MOD CELLULICIC identifies
according
are identified athe
tocell bywithin a
the
transmission
BS. mode
setting
indexes
adopted rangingof this
by the from 0
BTS3900, BTS3900 MOD CELLULICIC
ADD CELLSIMULOAD parameter
to 9 and correspond
simulated so that theto
load NO
LTE LST CELLULICIC
DSP CELLSIMULOAD edge
Indicates thedo
RB bands
usage
configuration fornotID
thresholds
local
BTS3900, BTS3900 LST CELLSIMULOAD overlap
(specified between
by
of the cell. It uniquely
beamforming the
in TDD
neighboring
SimuLoadRbThd cells. If a YES
LTE MOD identifies
cells, including: a cell within
ADD CELLSIMULOAD
CELLSIMULOAD this parameter
parameter)
BS.
TM1: indicates 10% is set
to to
Indicates the index of
BTS3900, BTS3900 MOD
RMV CELLSIMULOAD INVALID,
100% at a
transmission the
step cell
mode of 1does
the SRS subframe NO
LTE CELLSIMULOAD not
10%. distinguish
Indicates
for the For the
example,
simulated center
load the
Indicates
configuration the TDD
for the
ADD CELLSIMULOAD
LST CELLSIMULOAD and edge
modification
RB usage bands. period
thresholds
configuration.
SRS
cell. configuration to
BTS3900, BTS3900 MOD coefficient
for simulated for thewhere
load
TM2:
be
The used.indicates
value IfSCn,
this NO
LTE CELLSIMULOAD BCCH.
configurations
Indicates BCCH whether 1 and
transmission
parameter
n is variable,
Indicates theis setmode
local totoID 24
LST CELLSIMULOAD modification
are
configure
20% and
soundingperiod
50%, is
BTS3900, BTS3900 LST BCCHCFG for
ACCESS_FIRST,
of the
represents
the to
Indicates simulated
cell. It uniquely
whether load
the
the
equal
respectively.
reference
configuration.
TDD SRS
configuration Modification
signal n.within(SRS)
For YES
LTE MOD BCCHCFG identifies
sounding
period
Alternatively,
resources a cell
reference
coefficient
for you UEscan a
TM7:
configuration
example,
BS.
signal indicates
(SRS) the that
value
of a isin a
UE
multiplies
also
cell. The
manually
transmission
designed
SC0 indicates Default
value
to modespecify 7or
BTS3900, BTS3900 MOD BCCHCFG and the ACK/NACK
paging
the
BOOLEAN_TRUE
for RB
preferentially
the
subframe cycle,
usage
simulated where
configuration load NO
LTE LST BCCHCFG scheduling request
MOD the BCCH
threshold
indicates
Indicates
configuration.
guarantee
0, and the that
for
themodification
the
value aoffset
SRS SC1 of
(SR)
period
simulated
resourcesonand the PUCCH
default
load
are
BTS3900, BTS3900 CELLCHPWRCFG the
TM8: pilot
specifications
indicates
are power
indicates
allowed subframetoare relative
(for
use the
paging
configuration
available cyclein the by NO
LTE LST to the time
example, reference
transmission
configuration
same accessed 1. cell
mode
resources Ifsignal
the 8
CELLCHPWRCFG measured
setting
and
power.
for
UEs
cell can
Indicates
theand thebe
simulated
operates inconfigured
the
CAPS) unit
local
in of
is
FDD ID
load
DSP SRSCFG for
radiosimultaneous
frames,
SimuLoadRbThd
for UEs in the and
cell. the
The
BTS3900, BTS3900 of the Ifcell.
configuration.
used.
mode, thethis Itparameter
value uniquely SC15
LST SRSCFG transmission.
modification
parameter.
value period YES
LTE identifies
is set to
reserved. a cell within
If theiscell a
MOD SRSCFG If this
coefficientparameter
BOOLEAN_FALSE isTDD specified set
BS.
EXPERIENCE_FIRST,
operates in
BTS3900, BTS3900 MOD SRSCFG to
by BOOLEAN_FALSE,
this
indicates parameter.
that no SRS
the
mode, TDD
simultaneous the SRS values NO
LTE LST SRSCFG resource
configuration is available
that is in
SC14
Indicates andthe
transmission SC15 default
is notare
the cell,
designed
reserved. andto
The therefore
BTS3900, BTS3900 MOD SRSCFG paging
allowed.
no UE in period
In
the this for isthe
cell
preferentially
reserved
cell. It is values
also called NO
LTE LST SRSCFG situation,
configured the UE
with SRS
guarantee
cannot
the bethe
discontinuous
discards user
used. SRSFor and
resources.
experience
the relationship This
(for
BTS3900, BTS3900 MOD SRSCFG reception
only transmits (DRX) the
parameter
example,
between does
beamforming not NO
LTE LST SRSCFG period.
ACK/NACK
take effect If the
the on:
subframe
orEPC SR
(1) on
an
performance)
configuration
specifies
the PUCCH. a DRX is used.
index period
BTS3900, BTS3900 MOD SRSCFG FDD
CAPS
and cell that isfor call
iscell-specific
short
for
If athe
this UE,
establishedparametertheon UE anis set NO
LTE LST SRSCFG attempt
subframe
compares
to BOOLEAN_TRUE,per second.
cycle/offset,
this period If
Indicates
LBBPc
this
see and
parameter
3GPP theTS usesnumber
is fourto
set
36.211.
with
of
or the RX
simultaneous
paging
more value
occasions of this (a
antennas;
BTS3900, BTS3900 MOD PCCHCFG EXPERIENCE_ENHA
In FDD mode, this
parameter
transmission
type
(2) anofFDD subframe)and is
cell uses
that is NO
LTE LST PCCHCFG NCED, users can
parameter
the
withinsmaller
allowed.
establisheda
is
In this
paging one
on asget
period.
an its
better
permanently
DRX DL
period.
situation, user
theuses Ifvalid.
UE the In
BTS3900, BTS3900 MOD PCCHCFG This
LBBPc parameter
experience
TDD mode, and than value
thisspecifythat in
EPC
transmitsdoes not
truncated NO
LTE LST PCCHCFG also
extendedindicates
EXPERIENCE_FIRST
parameter cyclic
isorvalidthe prefix
a DRX
ACK/NACK
Indicates
number
(CP) in period,
of
the thepaging the only
SR.
number
uplink; UE
For
(3)
BTS3900, BTS3900 MOD PCCHCFG mode.
if
details,
of paging This
TddSrsCfgMode
uses the seevalue parameter
3GPP
messages of is a
this
TS
groups
TDD
cannot
set tocell within
be established
set atopaging NO
LTE LST PCCHCFG parameter,
36.211.
transmitted
period.
on an For
LBBPc. which
to UEs
details,If thisissee
EXPERIENCE_ENHA
EXPERIENCE_FIRST.
Indicates the local
delivered
over
3GPP the
parameter
NCED TS
if the
in
air the
interface.
36.304.
does LBBPc notIDis
system
BTS3900, BTS3900 LST PUSCHCFG of the cell.
information,
take effect It uniquely
as
on is its
a cell DRX
used. If Fora acell YES
LTE MOD PUSCHCFG identifies
period.
but SRS resources cell
details, within see a
established
Indicates
BS.
3GPP TS the onnumber
36.304. an are
BTS3900, BTS3900 MOD PUSCHCFG available
LBBPc
of PUSCH but insub-bands.
the cell,
this
SRS
parameterresources is setcan to be NO
LTE LST PUSCHCFG For details, see 3GPP
configured
Indicates
EXPERIENCE_ENHA
TS 36.211. for
the hopping UEs in
BTS3900, BTS3900 MOD PUSCHCFG the
mode cell.
NCED,of the PUSCH. NO
LTE LST PUSCHCFG For details, see 3GPP
EXPERIENCE_ENHA
Indicates
TS 36.211.
NCED is automaticallythe hopping
BTS3900, BTS3900 MOD PUSCHCFG offset
changed of the to PUSCH. NO
LTE LST PUSCHCFG For details,
EXPERIENCE_FIRST
Indicates see 3GPP
whether
TS
group 36.211.
when this hopping parameter of the
BTS3900, BTS3900 MOD PUSCHCFG
takes effect.
PUSCH is enabled.This NO
LTE LST PUSCHCFG Indicates the group
parameter
For details, issee valid 3GPP only
assignment
in TDD
TS 36.211. mode. of the
BTS3900, BTS3900 MOD PUSCHCFG
PUSCH. NO
LTE LST PUSCHCFG
For details, see 3GPP
TS 36.211.
Indicates the total
number of RBs at the
two ends whether
Indicates of the system
band
sequence that are hopping reserved of
BTS3900, BTS3900 MOD PUSCHCFG for
the the
PUSCH PUSCH. is This
NO
LTE LST PUSCHCFG parameter
enabled. is valid only
Indicates
when
For details,the the PUCCH see cyclic 3GPP
BTS3900, BTS3900 MOD PUSCHCFG shift
flexibleof the
TS 36.211. PUSCH.
configuration NO
LTE LST PUSCHCFG For details,
switch
Indicates see 3GPP
whether
TS 36.211.
(PucchFlexCfgSwitch)
64QAM of the PUSCH
BTS3900, BTS3900 MOD PUSCHCFG is turned on. The
ADD is enabled.
Indicates the mobile NO
LTE LST PUSCHCFG parameter setting must
CDMA20001XRTTPR For
countrydetails, code see (MCC) 3GPP of
EREG consider
TS 36.211. the number of
BTS3900, BTS3900 MOD PUCCHCFG the CDMA2000 1xRTT
ADD
LST RBs used
Indicates by
the mobilethe NO
LTE LST PUCCHCFG cell.
CDMA20001XRTTPR
CDMA20001XRTTPR PRACH,
Indicates
network SRS,
the ID
code and
(MNC)of theof
A public
PUCCH land
as well mobile as the
BTS3900, BTS3900 EREG
EREG local
the cell.
CDMA2000 It uniquely 1xRTT
ADD network
number (PLMN)
ofaRBs ID is YES
LTE LST
MOD identifies
cell. cell within
CDMA20001XRTTPR comprised
Indicates
compressed. the of an
cell
If MCC
theID of
CDMA20001XRTTPR
CDMA20001XRTTPR Indicates
an
A eNodeB.
public the network
land mobile
EREG and
the a
parameter
Indicates mobile
reference thesettingnetwork
ID of
BTS3900, BTS3900 EREG
EREG ID of the
network
code
CDMA2000 (MNC). reference
(PLMN) 1xRTT IDthe is YES
LTE LST
MOD
RMV exceeds
MSC
CDMA2000 to which
the system
1xRTT the
comprised
The
cell. MCC
The of
consists
cell a mobile
ID andis a of
CDMA20001XRTTPR
CDMA20001XRTTPR
ADD
CDMA20001XRTTPR bandwidth
reference
cell. Adigits.
base CDMA2000
capability
station
country
three
sector ID codetogether (MCC)
BTS3900, BTS3900 EREG
EREG and
1xRTT accordingly
cellular cell
system belongs. affects
and
LTE
CDMA20001XRTTPR
EREG
MOD
and an
Indicates
The
uniquely
the
The MNC
preceding
value
MNC. the
consists
identify
begins sector
RB awith ofaID YES
RMV
EREG member
The
of the MCC of the
consists of
CDMA20001XRTTPR
ADD two or reference
CDMA2000
resource
0x followedthree digits.
cell
allocation,
by a in the
CDMA20001XRTTPR network. A network
BTS3900, BTS3900
MOD
EREG
CDMA20001XRTTPR
three
CDMA2000
For
mobile
the
maximum
cell
digits.
example,
switching
cannot of 1xRTT
6 the is
if be
EREG
CDMA20001XRTTPR a
Thesubset
Indicates
cell. MNC
The ofthe a
consists
cell system
system
ID of NO
LTE RMV
EREG MCC
center
established
hexadecimal
that
is(MSC).
isthe
123
identified
and Inandthe
bythe a
EREG ID
two of
sector
MNC or isthree
ID reference
45, togetherdigits.
the PLMN
ADD
CDMA20001XRTTPR
MOD CDMA2000
successfully.
characters
system ID. (0
A 1xRTT
to
network9, and
BTS3900, BTS3900 LST CDMA2000
Forisexample,
uniquely
ID 12345. identify 1xRTT
if ID
thea
CDMA20001XRTTPR
EREG
CDMA20001XRTTPR network,
A
in to F),
a system a cell
for example,
is NO
LTE CDMA20001XRTTPR cell.
MCC
CDMA2000A issystem
123 and
cell IDin isa
the the
EREG
EREG uniquely
0x123A.
identified identifies
The
by a network
EREG
ADD allocated
MNC
Indicates
mobile is 45, to
the
switching each
the valuePLMN local for
MOD
LST cell
ID. within
hexadecimal
A 12345.
system the IDmobile
character
and a
BTS3900, BTS3900 CDMA20001XRTTPR CDMA
ID
SectorID104
is
center
switching mobile
(MSC).center of network
A the
sector
CDMA20001XRTTPR
CDMA20001XRTTPR string
network
Indicates cannot
ID the begin
together
band NO
LTE EREG and isis
neighboring
ID
(MSC). used
uniqueAidentify
cell to
inID a
EREG
EREG with
uniquely0,
Indicates for aexample,
the value arate
ADD
MOD class
determine
CDMA2000
consists that of 12UE
whether
high
cell can
and
bits. afor
BTS3900, BTS3900 LST the value
network.
SectorID24
pre-register cannot
System of
at. the
If be
ID
this 0
CDMA20001XRTTPR
CDMA20001XRTTPR UE
packetis
consists in the
data
ofAn roaming
(HRPD)
four bits.ID NO
LTE CDMA20001XRTTPR 0x0123A.
and MSC
EREG
EREG state.network
neighboring
parameter
cell. The Forvalue is ID
details set 0toabout
begins
EREG
ADD uniquely
indicate
CDMA2000
CFG, identifies
all base
high an
rate
MOD
LST with 0xthe
this parameter, UE
followed sends see
by aa
BTS3900, BTS3900 CDMA20001XRTTPR MSC
stations
packet
location and
3GPP2 C.S0005.
maximum data is
outside
update
of 26(HRPD) a
CDMA20001XRTTPR
ADD
CDMA20001XRTTPR NO
LTE EREG determined
specified
cell.
request Thetovalue
hexadecimal network
theby the beginsand
EREG
CDMA2000HRPDNCE
EREG
MOD operator.
are reserved
with
CDMA20000x followed
characters values.
(01xRTTto 9, byand a
BTS3900, BTS3900 LST
LL
CDMA20001XRTTPR
ADD MSCID
Network
maximum
system
A to F), when is IDdefined
for 65535
ofexample,
six
the UE inis NO
LTE CDMA20001XRTTPR
LST
EREG
CDMA2000HRPDNCE TIA/EIA-41.5-D
also
findsreserved;
hexadecimal
0x123A. thatThe the ID andID
this
current
EREG
CDMA2000HRPDNCE Indicates the of the(2
LST
LL consists
indicates
characters
band class
hexadecimal of
that MarketID
(0
is the
to 9, and
different
character
BTS3900, BTS3900 LL local
bytes) cell.
and It uniquely
SwitchNo
ADD
CDMA20001XRTTPR
LST roaming
A to
from
string F),
thecannotstatus
for
band example, of
class
begin UEs YES
LTE MOD identifies
(1 byte). a cell
MarketID within is
CDMA2000HRPDNCE
EREG
CDMA2000HRPDNCE
CDMA2000HRPDNCE is non-roaming
0x123A.
pre-registered
with
an 0,
eNodeB. for The example, in
the the
last
BTS3900, BTS3900 LL
LL described
whole
hexadecimal
time.value
the system
For details,in
cannot TIA/EIA
no
character see
be
LL TSB29 and can YES
LTE ADD
LST
MOD
RMV matter
string
0x0123A. what
cannot
the description thebeginofbe
CDMA2000HRPDNCE
CDMA2000HRPDNCE
CDMA2000HRPDNCE defined
network
with 0, for
BAND_CLASS
SECTORID128 by
IDthe the
is.band
example, Forin
CDMA2000HRPDNCE Indicates
BTS3900, BTS3900 LL
LL
LL operator.
details,
the
3GPP2 value
uniquely see It can
cannot
C.S0097. the
identifies bebe anthe
LL
ADD class
SID or on which
another the
ID that YES
LTE LST
MOD
RMV description
0x0123A.
EV-DO sector of NID in the in
CDMA2000HRPDNCE neighboring
can differentiate
CDMA2000HRPDNCE
CDMA2000HRPDNCE 3GPP2
SECTORID128
Indicates
global C.S0005.
scope thehigh and rate is
LL CDMA2000
operators. SwitchNo
BTS3900, BTS3900 LL
LL uniquely
frequency
comprised identifies
on whichan
of(HRPD)
LST packet
consists data
of a group YES
LTE MOD
RMV EV-DO
the sector
neighboring
SECTORID104
cell operates. inand
For theof
CDMA2000HRPDNCE
CDMA2000HRPDNCE
ADD
CDMA2000HRPDNCE cell
global addresses
scope and and is
CDMA2000
SECTORID24.
details about thisIDshigh rate
BTS3900, BTS3900 LL
LL
CDMA2000HRPDNCE
LL circuit
comprised resource of
packet
SECTORID104
parameter, data (HRPD)
see 3GPP YES
LTE MOD
RMV
LL under
Indicates
SECTORID104 MarketID.
whether and to
cell
TS operates.
uniquely
36.331. identifies For a
CDMA2000HRPDNCE
ADD
CDMA2000HRPDNCE
MOD permit
SECTORID24. or prohibit
BTS3900, BTS3900 details
subnetwork aboutinthis the
LL
CDMA2000HRPDNCE
LL
CDMA2000HRPDNCE handovers
SECTORID104 from the NO
LTE parameter,
global scope see and 3GPP
RMV
LL
LL Indicates
local
uniquely cell whether
to the
identifies to
a
TS 36.331.
SECTORID24 uniquely
CDMA2000HRPDNCE
MOD
LST permit
neighboring
subnetwork or prohibitcell.
BTS3900, BTS3900 LL identifies an in EV-DOthe
CDMA2000HRPDNCE
CDMA2000HRPDNCE removal
global
sector in of
scopethe theand NO
LTE Indicates whether ANR
LL
LL neighboring
SECTORID24
subnetwork. uniquely
ADD
LST
LST with neighboring
relationship
BTS3900, BTS3900 CDMA2000HRPDNCE identifies an by EV-DO ANR.
CDMA2000HRPDNCE
CDMA2000HRPDNCE CDMA2000
sector in thehigh rate NO
LTE LL
LL
LL packet
subnetwork. data (HRPD)
MOD cells is enabled.
BTS3900, BTS3900 Indicates the name of
CDMA2000HRPDNCE NO
LTE the local cell.
LL
LST
CDMA2000HRPDNCE
LL
ADD
CDMA2000HRPDNCE Indicates the mobile
ADD country code (MCC) of
LL
CDMA2000HRPDPRE Indicates
the CDMA2000 the name highof
MOD
REG Indicates thedata mobile
BTS3900, BTS3900 the neighboring
rate packet
CDMA2000HRPDNCE
ADD
LST NO
LTE network
CDMA2000
(HRPD) code
pre- HRPD (MNC) of
LL
CDMA2000HRPDPRE
CDMA2000HRPDPRE Indicates
the theparameter.
ID highof the
cell.CDMA2000
registration
BTS3900, BTS3900 LST
REG
REG local
rate cell.
packet It uniquely
data
ADD
CDMA2000HRPDNCE A public land mobile YES
LTE LST
MOD identifiespre-
(HRPD) a cell within
CDMA2000HRPDPRE
LL network (PLMN) ID is
CDMA2000HRPDPRE an eNodeB.ofparameter.
registration
REG comprised an MCC
BTS3900, BTS3900 REG A public land mobile
LST and a mobile network YES
LTE MOD
RMV Indicates
network
Indicates the
the ID
(PLMN) value of
IDthe is
for
CDMA2000HRPDPRE code (MNC).
CDMA2000HRPDPRE
ADD
CDMA2000HRPDPRE pre-registration
comprised
SectorID104 of a
of mobile
the
BTS3900, BTS3900 REG The MCCthe
Indicates consistsmobileof
REG
CDMA2000HRPDPRE
REG
ADD CDMA2000
country
reference code HRPD
CDMA2000 (MCC) YES
LTE MOD three
country digits.
code (MCC)for of
RMV
REG
CDMA2000HRPDREF zone.
Indicates
and
high an This
rate MNC.the parameter
packet value data
CDMA2000HRPDPRE The
the MNC
reference consists of
CDMA2000HRPDPRE
MOD
CELL is
Theused
SectorID24
(HRPD) MCC to control
of
consists
cell. The the
thevalue of
BTS3900, BTS3900 REG two
Indicates
CDMA2000or three the digits.
selection
mobile
high rate
REG
CDMA2000HRPDPRE
ADD
LST re-registration
reference
three
begins digits.
with CDMA2000
0x of the NO
LTE RMV For
ratio
network
packet example,
of the
code
data reference
if the
(MNC)
(HRPD) of
REG
CDMA2000HRPDREF
CDMA2000HRPDREF UE
high
The and
followed
Indicates
MCC
CDMA2000
the rate
MNC
is 123
referenceisby valid
packet
consists
the IDonly
ahigh
and data
of
the of
the
rate
CDMA2000HRPDPRE
LST cell.
when
(HRPD) pre-registration
cell. The value
BTS3900, BTS3900 CELL
CELL two
maximum
local
MNC
packet
CDMA2000orcell.
is three
data
45, Itofthedigits.
26
uniquely
(HRPD)
high PLMNrate
REG
ADD
CDMA2000HRPDPRE A
is public
allowed.
begins land
with For
0x mobile
details YES
LTE LST
MOD For
ID
cell is
packet example,
hexadecimal
identifies
that
12345. a
data a UE cell if
in
(HRPD) the
within
the E-
CDMA2000HRPDREF
REG network
about
followed this (PLMN)
byparameter,
acan ID is
CDMA2000HRPDREF
CDMA2000HRPDREF MCC
characters
an
UTRAN
cell. is
eNodeB. 123
cell (0 and to the
9,
pre- and
CELL comprised
see
maximum 3GPP ofsix
TS
of an MCC
36.331.
BTS3900, BTS3900 CELL
CELL MNC
A to
register
A public ismobile
F), 45,
for
at.
land the
example,
An PLMN
E-
mobile
ADD
LST and a
hexadecimal network YES
LTE MOD
RMV ID
UTRANis 12345.
0x123A.
network Themay ID is
cell
(PLMN)
CDMA2000HRPDREF
CDMA2000HRPDREF code
characters(MNC). (0 character
CDMA2000HRPDREF
CDMA2000HRPDREF hexadecimal
overlap
comprised
The multiple
of atomobile
9, and
BTS3900, BTS3900 CELL
CELL
CELL
CELL A to MCC
string
CDMA2000
country F), for
cannot
code
consists
example,
begin
HRPD(MCC)
of
YES
LTE ADD
LST
MOD three digits.
RMV 0x123A.
with
cells,
and 0,for
an for The
MNC. example,of
example,
CDMA2000HRPDREF
CDMA2000HRPDREF
CDMA2000HRPDREF The MNC consists
CDMA2000HRPDREF hexadecimal
the
when value
three cannot characterbeof
BTS3900, BTS3900 CELL
CELL
CELL
The
two
string
MCC threeE-UTRAN
orcannot consists
digits.
begin
CELL
LST 0x0123A.
sectors
three and six
digits. YES
LTE MOD
RMV For
with example,
0, for consists
example, if the
CDMA2000HRPDREF SECTORID128
CDMA2000
The
MCC MNC
is 123 HRPD
and the of
CDMA2000HRPDREF
ADD
CDMA2000HRPDREF the value cannot be
BTS3900, BTS3900 CELL uniquely
sectors
two
MNC oristhree identifies
cover
45, the
digits.
the PLMN an
CELL
CDMA2000HRPDREF
CELL 0x0123A.
Indicates theTherefore,
control YES
LTE MOD EV-DO
same
For
ID isexample,
12345.sector
area. ifinthethe
RMV
CELL SECTORID128
policy
CDMA2000HRPDREF
CDMA2000HRPDREF
MOD MCC ison
global
multiple scope ANR-related
CDMA2000
123 andandthe is
BTS3900, BTS3900 ADD uniquely
MOs,
comprised
HRPD
MNC is which identifies
sector
45, of can
the IDs be
PLMN an
can
CELL
CELL
CDMA2000HRPDREF NO
LTE CDMA2000NFREQ EV-DO
defined
SECTORID104
be specified
ID is 12345.
Indicates sector
by the the for in
userthe
and
an or
E-
RMV
CELL
LST global
Indicates
be based
SECTORID24.
UTRAN
neighboring scope the
on
cell, and
Automatic
cell
with is
ID
each of
CDMA2000HRPDREF
LST
ADD
BTS3900, BTS3900 CDMA2000NFREQ comprised
the
Neighbor
local cell.
SECTORID104
CDMA2000 ofband
Relation
HRPDIt
CELL
CDMA2000HRPDREF
CDMA2000NFREQ YES
LTE MOD SECTORID104
uniquely
(ANR) algorithm.
sector Signals
class. ID identifies
configured onand aa
CELL
LST
CDMA2000NFREQ SECTORID24.
Indicates
cell
When within
this the
an
parameter
eNodeB.
ADD
subnetwork
with a selection
frequency
Indicates the
in the
withinratio. the is
BTS3900, BTS3900 CDMA2000NFREQ
RMV SECTORID104
frequency-specific
set
global
Duringto scope
UE pre- and
CDMA2000NFREQ band class can be
neighboring YES
LTE MOD
CDMA2000NFREQ uniquely
offset of the
MANUAL_MODE,
SECTORID24
registration, identifies
local a
cell
uniquelythe
LST obtained
CDMA2000 by frequency
UEs. For
CDMA2000NFREQ subnetwork
to the
ANR-related neighboring
identifiessee
CDMA2000 anthe in the
MOs can
EV-DO
HRPD
BTS3900, BTS3900 CDMA2000NFREQ details,
of the serving cell.
RMV global
CDMA2000
be
sector scope
modified
in
IDs
BandclassCDMA2000 the are orand
cell onFor
selected the YES
LTE ADD
MOD
CDMA2000NFREQ details,
SECTORID24 see the IE
uniquely
frequency.
removed
subnetwork.
based
IE defined by A
on historical larger
only
For
in 3GPP the
CDMA2000NFREQ
CDMA2000NFREQ CDMA2000-CarrierInfo
identifies an EV-DO
value
user.
details,
selection
36.331 Aof6.3.4.
this
failure
see parameter
C.S0024.
ratios.
BTS3900, BTS3900 MOD
RMV in the to
Indicates
sector 3GPP
inathewhether 36.331 to
ADD leads
message
Considering ishigher
displayed
the NO
LTE CDMA2000NFREQ
CDMA2000NFREQ 6.3.4
set the protocol.
subnetwork. size of For the
CDMA2000NFREQ probability
when
Indicates
cellular the the
networkof
usersearchtriggering
adds an
LST CDMA2000
details, see search
C.S0024.
BTS3900, BTS3900 MOD measurement
existed
window
structure, MO.
size toreports.
When
a maximum be this
CDMA2000NFREQ window. If this NO
LTE ADD
CDMA2000NFREQ For
used details,
parameter by
of six CDMA2000 the is see
UE set the
to Q-
for
CDMA2000NFREQ parameter
OffsetRangeInterRAT
AUTO_MODE,
searching
HRPD sector is set
for the
IDs theto
pilots
can
LST
ADD
BTS3900, BTS3900 MOD NOT_CFG,
IE
of defined
ANR-related
bethe
Indicates neighboring
configured the
in MOs
whether default
section
for athecan
UE
CDMA2000NFREQ
GERANEXTERNALCE NO
LTE CDMA2000NFREQ size
6.3.4
be
CDMA2000
in the
external(8)
in
modified is
3GPP
E-UTRAN used.
GERAN or TScell.
cells. For
cell
LL
LST
ADD
MOD 36.331.
removed
details,
supportssee by the
single the radio user
BTS3900, BTS3900 CDMA2000NFREQ
GERANEXTERNALCE Indicates
or based
MeasObjectCDMA200 the
on
voice call continuity priority
routing
the ANRof
GERANEXTERNALCE the NO
LTE LL
LL 0 IEneighboring
area
(SRVCC) code.for
algorithm.
defined The in MO cell
3GPP
ADD
MOD during
removal
TS 36.331.
concurrent blind
is successful
CS and PS
BTS3900, BTS3900 LST handovers. Blind
GERANEXTERNALCE
GERANEXTERNALCE
GERANEXTERNALCE even
services. if theIf MO this does NO
LTE LL handover
not exist. is
An a MO processcan
LL
LL parameter is set to
MOD
LST in
be which
added
BOOLEAN_FALSE, theboth eNodeB by the
BTS3900, BTS3900 instructs
GERANEXTERNALCE
GERANEXTERNALCE user and abased
the external UE GERAN toon handthe NO
LTE over to a specified
LL
LL ANR
cell does algorithm.
not support If an
ADD
LST GERANNCELL neighboring
existed
SRVCCMO iscell.
for concurrentto be There
BTS3900, BTS3900
MOD GERANNCELL
GERANEXTERNALCE are
added,
CS 32
and PS priorities
the MOservices.is NO
LTE Indicates whether this
LST
LL GERANNCELL altogether.
modified when Thethe priority
neighboring
has a positive
user performs the cell is
BTS3900, BTS3900
LST GERANNCELL automatically
correlation
addition, but with the
it cannot NO
LTE
discovered
value
be added of this by theonANR
based the
algorithm.
parameter.
ANR algorithm. NoteThe that
the value 0control
preceding indicates
that
policy blind
alsohandovers
applies to to
the
the neighboring cell
are not allowed.
GeranExternalCellPlm
n MO, which is a child
be modified block
information or type
removed
7 (SIB7). by Theonly UEthe
user. A failure
decides whether to
messageaisneighboring
reselect displayed
when
cell onthe user addsinan
a frequency
existed
the GERAN MO. carrier When this
ADD GERANNCELL parameter
frequency group is set to based
BTS3900, BTS3900 Indicates
AUTO_MODE,
on the value the of name the of
this
MOD GERANNCELL NO
LTE the local cell.
ANR-related
parameter and MOs thecan
LST GERANNCELL
ADD GERANNCELL be modified
absolute
Indicates theorname
priority of the of
BTS3900, BTS3900 Indicates
removed
serving whether
by
cell. the
If the user to
MOD GERANNCELL the GERAN NO
LTE set
or theofreselection
based on cell. the ANR
LST GERANNCELL value
neighboring this parameter
ADD
ADD GERANNCELL priority
algorithm.
Indicates of
is larger than the the
The
the MO
minimum
BTS3900, BTS3900 GERANNFREQGROU frequencies in the
MOD GERANNCELL removal
RX level is
absolute successful
required
priority offor thea NO
LTE P GERAN carrier
LST GERANNCELL even if the
neighboring
serving cell, MO thedoes
cell on a
UE
ADD
MOD frequency
not exist.
frequency Angroup.
in the MO can If the
BTS3900, BTS3900 starts measurements
GERANNFREQGROU
GERANNFREQGROU value
Indicates
be
GERAN added of this
whether
both parameter
carrier cells by to
the NO
LTE on neighboring
P
P Indicates
is
set
usernotthe
frequency and the
configured,
maximum
based
group maximumonto the the
ADD on the frequencies
Indicates the RX level in
MOD
LST power
UE
power
ANR
become does that
that
algorithm.
a not the
the
candidate UE
reselect
UEIf an can
can
BTS3900, BTS3900 GERANNFREQGROU the GERAN
Indicates
required carrier
theaRX level
for
GERANNFREQGROU
GERANNFREQGROU apply
to
apply
existed
for to
neighboring
toMO
selection. transmission
transmission
is Ittocells
isonbe on NO
LTE P frequency
required
neighboring forgroup;acell then a
P
P on
the
on
added,a
a frequency
frequencies
frequency
the ininMO in
in
in the
the
the
ADD
MOD
LST
included
if the signal
neighboring
frequency
GERAN carrier theisonSof
criteria
quality
cell a
BTS3900, BTS3900 GERANNFREQGROU GERAN
modified
and
some
frequency
GERAN used carrier
when
in
neighboringin
carrier the
the the cells
GERANNFREQGROU
GERANNFREQGROU frequency group. It the
is NO
LTE P frequency
user
meetsperforms
evaluation
GERAN
frequency the group.
for cell
related
carrier
group theto If
P
P used
Indicates in cell the reselection
control
ADD
MOD value
addition,
selection.
conditions,
frequency
become of this
but
During
the
group parameter
it cannot
UE the
to
BTS3900, BTS3900 LST
GERANNFREQGROU criteria
policy
is
be not
starts
becomeadded
evaluation ontoa
cell a
candidate
ANR-related
specified,calculate
based
for cell
reselection.
candidate onthe
the the
GERANNFREQGROU
GERANNFREQGROU for reselection
Indicates the if the NO
LTE P compensated
MOs,
maximum
ANR
reselection,
If
forthe which
algorithm.
value
reselection power
of can
the power.
this
if be
is
When
UEthe If
P
P priority
frequency of the
group
ADD
MOD the
defined
subject
the value
ANR-related
performs
parameter
priority of by
to of
the
the
the the this user
UE MOs
following
is higher
smaller or
BTS3900, BTS3900 LST frequency
priority based is on which
GERANNFREQGROU
GERANNFREQGROU parameter
be
than based
capability.
are automatically
calculation:
frequency the absoluteon isSrxlev
is not
lower = NO
LTE GERANNFREQGROU than
the that
eNodeB of the
selects serving a
P
P specified,
ANR(Automatic
added
Measured
priority
than thatbased
of ofthe
RSSI
the the on
serving the
value
P
ADD frequency.
Indicates
target
maximum
Neighbor frequencythe
Relation)
power cellserving
group
is
MOD
LST ANR
of
cell, algorithm,
a neighboring
the
frequency. UEpriority starts this
cell the
BTS3900, BTS3900 GERANNFREQGROU After
reselection
for blind
subject
algorithm. measurements
toredirection
the
When UE this ofor
GERANNFREQGROU
GERANNFREQGROU parameter
on a frequency
measurements
After measurements is set in to
only the NO
LTE P are
the neighboring
started
Indicates
delivers
capability.
parameter a the for
frequency
For
is set E-
details,
to
P
P AUTO_MODE
GERAN
when
are carrier
thefrequency.
started signal
for byquality
ADD
MOD neighboring
UTRAN
frequency
group
see
MANUAL_MODE,
3GPPinWhen offset
measurement
TS cells ofon
36.304. the
the a
BTS3900, BTS3900 LST default.
frequency
of the
neighboring serving group cells the
cell-on is a
GERANNFREQGROU
GERANNFREQGROU frequency
The
group value
configuration
ANR-related in indicates
0
of neighboring the
MOs can NO
LTE GERANNFREQGROU ANR-related
Value
poor;
frequency of carrier
then this if the
in MOs
the signalare
P the
GERAN lowest
messages. priority. It is
P
P
ADD
MOD
be
added
GERAN modified
parameter
quality
frequency
contained
frequencies.
by the
ofcarrier -Ifor
some
in
group,
auser,
system
This
blindthis
the
BTS3900, BTS3900 LST redirection
removed
parameter
Compensated by is
can triggered
only be
power. theset
GERANNFREQGROU
GERANNFREQGROU neighboring
frequency
UE
information
reselects
parameter group,
is cells
blockto
used a the
type
cell
LTE GERANNFREQGROU and
user.
Indicates
to
If
meets
UE
the
Athe
AUTO_MODE
Srxlev
reselects
target
failure
forwhether
a
related to a or ain
cell
NO
P
P
P on
5
the(SIB5).
the
message frequency
decision
neighboring The
isthe UE
ofwith
cell
displayedtheis onlyUE
not
ADD BCCH
MANUAL_MODE.
neighboring
conditions,
on theRX carrier
frequency cell UE isthe the
only
MOD
LST if
decides
to the
when send
specified, the whether
level
measurement
the
user of
eNodeB to
BTS3900, BTS3900 GERANNFREQGROU specific
better
starts
if theisRX than
cell NCC athan isof the an
adds
threshold
reselection.
LTE
GERANNFREQGROU
GERANNFREQGROU cell
reselect
reports
selects
existed
permitted better
for
a alevel
MO. neighboring
inter-RAT
target
for When the this NO
P
P
P for
value
cell aon
serving
handovers.time-to-trigger,
Frequencies cell
specified
the is used
frequency
For lower
by
details,for
this
frequency
parameter
monitoring.
reselection group
is For set
to the based
to
details,
cellbe
MOD
LST different
than
parameter
based a on RATs
specified
thefor must
BTS3900, BTS3900
GERANNFREQGROU
see
on
see
is the
assigned
threshold
3GPP
AUTO_MODE,
3GPP
started. setting TSvalue
TS
For
different
and
a time-
thisof
36.331.
of the
36.331.
details,
that cell
of NO
LTE GERANNFREQGROU to-trigger.
this parameter
parameter.
ANR-related For If MOs details,
and
a36.104. can the
P
P Indicates
see
see
absolute 3GPP
reselection
the cell
3GPP is whether
TSpriorities.
better
priority
TS than
36.104.
of this
the
ADD
LST measurement
be modified
neighboring or
cell is by
BTS3900, BTS3900 LST For
the
serving details,
value cell. see
specified
Ifisthe 3GPP
EUTRANINTRAFREQ
EUTRANINTRAFREQ configuration
removed
automatically by the to
user be NO
LTE GERANNFREQGROU TS
this
value 36.331.
Indicates
parameter
of this the for
parameter a
NCELL
NCELL delivered,
or based
discovered
Indicates on theby
whether the eNodeB
the ANR ANR
to
P time-to-trigger.
evaluation
is larger than duration theFor for
ADD
MOD preferentially
algorithm. The delivers
MOTS
BTS3900, BTS3900 set the
details,
a UE
absolute to reselection
see
determine 3GPP
EUTRANINTERNFRE
EUTRANINTRAFREQ the
removalfrequency
priority of ispriority
successfulgroup of the NO
LTE Q 36.104.
whether
serving
with the tothe
cell,
highest reselect
thedoes UE the
NCELL even
neighboringif
inter-frequencythe MO E-UTRAN
ADD
MOD
LST starts
priority.
not exist.measurements
If Anthis MO can
BTS3900, BTS3900 frequency.
neighboring If thecells value
LTE
EUTRANINTERNFRE
EUTRANINTERNFRE
EUTRANINTRAFREQ on neighboring
parameter
be added iscell
both setbyto tothe 0 NO
Q of
camp
on this
the parameter
on. If the signal
frequency; isthen not
Q
NCELL for
user a and
frequency based group,
on the
ADD
MOD specified,
quality
if the in
signal anthe UE does
inter-
quality of
LST this frequency
BTS3900, BTS3900 EUTRANINTERNFRE
EUTRANINTERNFRE
ANR
not
frequency
some
algorithm.
reselect
neighboring to group
neighboring If an is
cells NO
LTE EUTRANINTERNFRE not
existedselected MO is as to the
be
Q
Q neighboring
cell
meets is
Indicates better
the cells
related
whether than on
that
to
Q
ADD target
added, frequency
the MOcell isgroup
MOD the
in frequency.
BTS3900, BTS3900 LST
EUTRANINTERNFRE forthe
conditions,
set athe
modified
serving
blind speed-
when the the
redirection. UEfor
EUTRANINTERNFRE
EUTRANINTERNFRE the
starts period
dependent
A larger cellvalue specified
reselection.
scaling by NO
LTE Q user performs the
Q
Q this
If the parameter
parameters
indicates value of
related
a higher and
this a
to
ADD
MOD
LST addition,
UE camps but onitless cannot
the
BTS3900, BTS3900 Indicates
parameter
cell reselection.
priority.
be added theis
based scaling onthan the
EUTRANINTERNFRE
EUTRANINTERNFRE
EUTRANINTERNFRE serving cell fortomore NO
LTE factor
or
If
ANR equal
this applied
to the
parameter
algorithm. the
is set
When
Q
Q
Q than 1s, the UEspeed-
ADD cell
absolute
to
the reselection
NOT_CFG,
ANR-related priority of
MOs the
MOD
LST Indicates
attempts the
to scaling
reselect
BTS3900, BTS3900 EUTRANINTERNFRE duration
serving
Indicates
dependent
are for
cell,
automatically the medium-
cellthe UE
EUTRANINTERNFRE
EUTRANINTERNFRE factor
the applied
inter-frequency to notthe NO
LTE Q mobility
starts the
frequency-specific
reselections
added UEs.are
based This
on the
Q
Q cell reselection
neighboring cell to
ADD
MOD parameter
measurements
offset
supported
ANR for
algorithm,the is delivered
by default. only
this
BTS3900, BTS3900 LST duration
camp on.ForforThis high-
EUTRANINTERNFRE
EUTRANINTERNFRE in
when SIB5.
neighboring
parameter the signal
is details,
E-UTRAN
set quality
to NO
LTE EUTRANINTERNFRE mobility
parameter UEs. is This
contained
Q
Q see
of the
frequency
AUTO_MODE3GPPserving TS
that 36.331.
cell
applies
by is
Q parameter
in SIB5. For isdetails,
delivered
MOD
LST poor;
to UEs
default. theninWhen if
idle the mode.signal
the It
BTS3900, BTS3900 in
see SIB5.
quality 3GPP of For TS
some details,
36.331.
EUTRANINTERNFRE
EUTRANINTERNFRE is contained
ANR-related in
MOs system are NO
LTE see 3GPP TS
neighboring cells 36.331.
Q
Q information
added by the block user,type this
LST meets
5 (SIB5)
parameter theand related
can delivered
be set
EUTRANINTERNFRE conditions,
to
to UEs
AUTO_MODE in idle themode UEor for
Q starts
cell cell
reselection.
MANUAL_MODE. reselection. For
Frequencies
details, see 3GPP used for TS
different RATs must be
36.331.
assigned different cell
reselection priorities.
UL/DL configurations
of inter-frequency
Indicates whether
neighboring cell ofto the
set the
serving maximum
cell.
Indicates the maximum
ADD
power that
BitString00:
power that the theIndicatesUE can
UE can
EUTRANINTERNFRE
apply
that
applysome to
to transmission
neighboring
transmission
Q
ADD on
on the
cellsthe
Indicateshaveneighboring
the same
neighboring
whether allE-
E-
MOD
BTS3900, BTS3900 EUTRANINTERNFRE UTRAN
UTRAN frequency. If
MBSFN
inter-frequency frequency.
subframe It is
EUTRANINTERNFRE NO
LTE Q the
used value
configuration
Indicates in cell
neighboring of reselection
the thisas the
event
cells onto
Q
ADD
MOD parameter
Indicates
serving
trigger
criteria
this the
cell.
coverage-
to
frequency is not
calculate RSRQ-
are the
BTS3900, BTS3900 LST Indicates the RSRQ-
EUTRANINTERNFRE
EUTRANINTERNFRE specified,
based
BitString01:
based
compensated
configured minimum the Indicates
inter-frequency
with at power. RX least If NO
LTE EUTRANINTERNFRE based minimum RX
Q
Q maximum
level
that required
none
handovers.
the value
two antenna power
of
of This the
this for
ports. is
a
Q
ADD level required for aisset
MOD
LST subject
neighboring
parameter to the iscell
can cells UE
not be on the
BTS3900, BTS3900 Set this parameter
neighboring cell on to
thea
EUTRANINTERNFRE
EUTRANINTERNFRE
EUTRANINTERNFRE capability.
frequency
configured
to EventA3,
specified, the towith become
EventA4, NO
LTE BOOLEAN_TRUE if all
Q
Q
Q frequency
candidate
MBSFN
or EventA5.
maximum to
subframes.
power become
forIfcontrol theis a
ADD inter-frequency
Indicates
candidate the
for
MOD
LST reselection
BitString10:
neighboring
subject if the
Indicates
E-UTRAN
BTS3900, BTS3900 EUTRANINTERNFRE neighboring
policy
reselection ontoANR-related
the
ifcells
UE on
the
EUTRANINTERNFRE
EUTRANINTERNFRE RSRQ-based
that the
frequency
capability. MBSFN and
For priority
the
details, NO
LTE Q this
MOs, frequency
RSRQ-based which can are
priority be
Q
Q of
seethe
subframe
serving3GPPfrequency
frequency
TS 36.304. isleast
are
ADD
MOD configured
defined
of the by
frequency the
with user
at is or
BTS3900, BTS3900 LST higher
in the
Indicates than
configurations
same the that of
frequency of allthe
EUTRANINTERNFRE
EUTRANINTERNFRE two
be
lowerbased
antenna
than on that ports. NO
LTE EUTRANINTERNFRE
Q
serving
neighboring
band,
frequency
Set frequency.
event
ANR(Automatic
this A3 of
cells
priority
parameter is are the
to
Q
Q serving
After
the same frequency.
measurements
as or asthe
ADD
MOD recommended
based
BOOLEAN_FALSE
Neighbor on Relation)
which it if
BTS3900, BTS3900 LST After
are measurements
started
subsets of for ofathis
that the
EUTRANINTERNFRE
EUTRANINTERNFRE provides
eNodeB
one
algorithm. better
selects
inter-frequency
When NO
LTE EUTRANINTERNFRE are started
neighboring
serving cell. for
cells on
Q
Q handover
target
neighboring
parameter
Indicates frequencyperformance
the iscell set
minimum onforthis
to
Q neighboring cells
ADD
MOD
LST
the
in
blind neighboring
BitString11:
this
frequency
RX situation.
redirection
MANUAL_MODE,
level of is anIndicates
inter-oron
E-
If the
the
a
BTS3900, BTS3900 EUTRANINTERNFRE frequency
UTRAN
that
containsthe serving
neighboring in
frequency, the
E-UTRAN
a neighboring
frequency TDD the
EUTRANINTERNFRE
EUTRANINTERNFRE configured
ANR-related
frequency with MOs only can NO
LTE Q GERAN
UE
cells reselects
Indicates
frequency
in a have carrier
measurement whether to
neighboring
and thea the
Q
Q one
be
cell,modified
antenna
which group, isorport.
required
ADD frequency
cells
neighboring
of become
different cell
frequency on the the
BTS3900, BTS3900
MOD
LST Indicates
serving
configuration.
removed
for
UE it to
reselects
whether
frequency
by onlyto
If a
aaUL-DL
the to
are
blind
EUTRANINTERNFRE
EUTRANINTERNFRE
EUTRANINTERNFRE frequency
configurations.
of
set the
the serving
in different
redirection
user. minimum
A failure only
frequency
is if
triggered the NO
LTE candidate
neighboring for cell cellon the
Q
Q
Q RSRQ-based
For
frequency
details,
required
bands,
and
message theevent RX
target
iscan see RX
level.
A4
displayedbe 3GPPor level
a A5
ADD reselection.
frequency only It ifisin the
MOD
LST of
TS the
target
is used.
neighboring
Indicates
when cell
36.331.
frequency
the the is
user higher
cellpriority
adds not of
an
BTS3900, BTS3900 EUTRANINTERNFRE determines
RSRQ-based the RX level
EUTRANINTERNFRE
EUTRANINTERNFRE than
load the
specified,
the neighboring
existed value
balancing.
MO. the eNodeB
When If
cell thisthis NO
LTE Q probability
of the serving of triggering
cell is
Q
Q specified
parameter
selects
during
parameter byis
a target
handovers.is this
set
settoto The
tointer-
ADD
MOD cell
lower reselection
than a specified
BTS3900, BTS3900 LST parameter
ALLOWED,
frequency
parameter
AUTO_MODE, for
basedthe
values a thetime-on are
EUTRANINTERNFRE
EUTRANINTERNFRE frequency
threshold
Indicates neighboring
and
the that of
control NO
LTE EUTRANINTERNFRE to-trigger.
neighboring
this
dividedpriority.
ANR-related into For three
MOsadetails,
Iffrequency can
Q
Q cells
the
policy on
cell on the
is higherfrequency.
ANR-related than
Q
ADD see
of 3GPP
Indicates
the
measurement
segments,
be serving
modified the TS offset
36.331.
control
cell
indicating
or for
MOD
LST The
the
MOs, value
valuewhich of
specified
canthis bebe by
BTS3900, BTS3900 EUTRANINTERNFRE the inter-frequency
frequency
policy
individual on
configuration
the ANR-related
blind-handover
removed
parameter can
offset
byisthe is be to
containedfor
user the
EUTRANINTERNFRE
EUTRANINTERNFRE this
definedparameter
neighboring by thecell, for
user a or
which NO
LTE Q selected
MOs,
priority,
or
in based
SIB5. which
inter-frequency
delivered, as the
frequency-
on
For acan
the target
eNodeB
details, be
ANR
Q
Q time-to-trigger.
be
is based
used in on For
Automatic
evaluation
ADD
MOD frequency
defined
neighboring
preferentially
based-handover
algorithm.
see 3GPP by inthe
The
TS load
cell, user
delivers
MO
36.331. which ora
BTS3900, BTS3900 LST details,
Neighbor
for cell see 3GPP
Relation
reselections. TS
EUTRANINTERFREQ
EUTRANINTERNFRE
EUTRANINTERNFRE
balancing.
be
is based
used
frequency
priority,
removal in on If this
evaluation
is with
and 0. Within
successful the A NO
LTE NCELL 36.331.
(ANR)
larger
parameter
ANR(Automatic
for algorithm.
value
handovers.
highest is
priority. of set this
It Iftothis
Q
Q the
even sameif thesegment,MO does a
ADD
MOD When
parameter
NOT_ALLOWED,
Neighbor
affects
priority
larger this
the
is setparameter
results
Relation)
probability
to 0 theaais
in
for
BTS3900, BTS3900 LST not exist. An MO value
parameter can
EUTRANINTERFREQ set
lower to probability
LTE
EUTRANINTERFREQ
EUTRANINTERNFRE neighboring
algorithm.
of triggering
frequency,
indicates
be added When
aboth frequency
thisinter-
higher byof thisthe cell NO
NCELL
NCELL MANUAL_MODE,
reselections.
of
parameter
the
frequency
priority. serving is
is not If
set this to the
Q
ADD user andBlind based handoveron the
MOD ANR-related
parameter isthe MOs
not can
BTS3900, BTS3900 LST
EUTRANINTERFREQ
frequency
MANUAL_MODE,
measurement
selected
is
ANRa process ascannot
algorithm. in Ifset
reports.
target
which be
an the to
EUTRANINTERFREQ
EUTRANINTERFREQ be
dB0,
A modified
selected
larger
frequency
the it
ANR-related
eNodeB is delivered
as
valuefor aor MOs
target
a of blindthis in
can NO
LTE NCELL existed MO isinstructs to be a
NCELL removed
SIB5. to For by only theaa
frequency
be modified
parameter
redirection.
UE
added, thedetails,
hand in or load
indicates
MOA
over largeristosee
MOD
LST user.
3GPP
balancing.
removed
higher A TS failure
by36.331.
probability.
value indicates only a the If
For
BTS3900, BTS3900 specified
modified neighboring
when the
EUTRANINTERFREQ
EUTRANINTERFREQ message
this
user. parameter
details, A is
failure
see displayed
3GPP is set TSto NO
LTE higher
cell
user
Indicates priority.
without
performs whether the this
NCELL
NCELL when
dB0,
message
36.331. itthe
is user
not
is adds
delivered
displayed an
ADD
LST measurements.
addition,
neighboring but cell it cannot Ifisthis
BTS3900, BTS3900 LST existed
in
whenSIB5. the MO.
Inuserthis When adds this
an
EUTRANINTERFREQ
EUTRANINTERFREQ parameter
be added based
automatically value on is set the NO
LTE EUTRANINTERFREQ parameter
situation,
existed MO. UEs is When set use to 0this
NCELL
NCELL to 0, blind
ANR algorithm.
discovered handovers When
NCELL
ADD
MOD
AUTO_MODE,
dB as
parameter
and
the the offset
frequency-based
ANR-related isbyset the
the for
to
MOs
ANRcell
BTS3900, BTS3900 algorithm.
ANR-related
Indicates
reselections.
AUTO_MODE, the MOs
name
For the can of
EUTRANINTERFREQ
EUTRANINTERFREQ handovers
are automatically cannot be NO
LTE NCELL be
the modified
local
details,
ANR-related
performed. seecell. or
3GPP
The MOs TS
can
NCELL added based on the
ADD
MOD removed
36.304.
be modified
Indicates
parameter by
the the
or
values name user 1 of to
BTS3900, BTS3900 LST ANR algorithm, this
EUTRANINTERFREQ
EUTRANINTERFREQ or
the
16 based
removed on
byisthe
inter-frequency
indicate the
the ANR
user NO
LTE EUTRANINTERFREQ parameter setblind- to
NCELL
NCELL algorithm.
or based on
neighboring
handover The theby
cell.
priorities. MO ANR
NCELL AUTO_MODE
ADD
MOD
LST removal
algorithm.
The parameteris successful
The MO
values
BTS3900, BTS3900 default. When the
EUTRANEXTERNALC
EUTRANINTERFREQ
ADD
EUTRANINTERFREQ even
17 to if32the
removal is MO does
successful
indicate NO
LTE ANR-related MOsthe are
ELL
NCELL not
even exist. theAn MO can
CDMA2000BCSCELL
NCELL addedif by
frequency-based- the MO user,does this
MOD
LST
OP be
not added
exist. An
handover both MO
priorities bycan thefor
BTS3900, BTS3900 parameter can be set
EUTRANEXTERNALC
ADD
EUTRANINTERFREQ
LST user
be and based
added
frequency-based both by on the
blind the NO
LTE to AUTO_MODE or
ELL
CDMA2000BCSCELL
NCELL
CDMA2000BCSCELL ANR
user
Indicates
handovers algorithm.
and based
the and If
cell IDthe
on an of
MANUAL_MODE.
BTS3900, BTS3900 LST
OP
OP existed
Indicates
ANR
the MO the
algorithm.
local
measurement-based cell. is IttoIfbe an
EUTRANEXTERNALC
LST added,
neighboring
existed the
MO MOis toisbea YES
LTE MOD uniquely
handovers. identifies
ELL
CDMA2000BCSCELL
CDMA2000BCSCELL modified
CDMA2000
added,
cell within when
thean MO band the
eNodeB.is
BTS3900, BTS3900 OP
OP user
class.
modified performs
Forwhen details, the
thesee
addition, but it the cannot YES
LTE MOD
RMV the
user performs
CDMA2000BCSCELL
CDMA2000BCSCELL be addedbut
BandclassCDMA2000
addition, based it cannot on the
OP
OP ANR
IE
be definedalgorithm.
added based in 3GPP The on the
RMV preceding
36.331.
ANR algorithm. control When
CDMA2000BCSCELL policy also applies
the ANR-related MOs to
OP the
are automatically
EutranExternalCellPlm
added based on the
n
ANRMO,algorithm,
which is athis child
ADD
CDMA2000BCSCELL
OP
ADD
LST
EUTRANNFREQSCEL
CDMA2000BCSCELL
BTS3900, BTS3900 LOP
OP Indicates the ID of the
ADD
LST YES
LTE MOD operator.
EUTRANNFREQSCEL
EUTRANNFREQSCEL
CDMA2000BCSCELL Indicates the ID of the
BTS3900, BTS3900 LOP
LOP
OP local cell. the It uniquely
ADD Indicates DL YES
LTE LST
MOD identifies aofcell
RMV
EUTRANNFREQSCEL EARFCN thewithin
EUTRANNFREQSCEL
CDMA2000BCSCELL an eNodeB.
LOP Operator Configuration
BTS3900, BTS3900 LOP
OP
ADD
LST for Serving Cell in YES
LTE MOD
RMV
GERANNFGROUPSC
EUTRANNFREQSCEL EUTRAN
Indicates the Frequency.control
EUTRANNFREQSCEL
EUTRANNFREQSCEL
BTS3900, BTS3900 ELLOP
LOP For details,
Indicates
policy thesee
on ANR-related ID theof the
LOP
LOP
ADD YES
LTE LST
MOD 3GPP
operator.
MOs, TS 36.104.
which can be
RMV
GERANNFGROUPSC
GERANNFGROUPSC
EUTRANNFREQSCEL
EUTRANNFREQSCEL Indicatesbythe
defined theIDuser of the or
BTS3900, BTS3900 ELLOP
ELLOP
LOP local cell. It
be based onuniquely
LOP
ADD
LST Indicates YES
LTE MOD
RMV identifies
ANR(Automatic athe cell index
within of
GERANNFGROUPSC
GERANNFGROUPSC
GERANNFGROUPSC the
an GERAN
eNodeB. carrier
EUTRANNFREQSCEL
ELLOP Neighbor Relation)
BTS3900, BTS3900 ELLOP
ELLOP
LOP Indicates
algorithm.the
frequency group.
When priority It of
this
LST the neighboring cell YES
LTE MOD
RMV uniquely
parameter is set toa
identifies
GERANNFGROUPSC
GERANNFGROUPSC
GERANNFGROUPSC during
GERAN blind
carrier
BTS3900, BTS3900 ELLOP MANUAL_MODE,
Indicates the ID of the the
ELLOP
ELLOP handovers.
frequency
ANR-related Blind
group. MOs can YES
LTE MOD
RMV operator.
handover
Indicates is
whethera process this
GERANNFGROUPSC be modified or
GERANNFGROUPSC in which the
neighboring
removed by only eNodeB
cell isthe
BTS3900, BTS3900 ELLOP
ELLOP instructs a UE to hand
LST UTRANNCELL automatically
user. A failure NO
LTE RMV over
GERANNFGROUPSC message specified
to
discovered a is by the ANR
displayed
ADD UTRANNCELL neighboring
algorithm.
when the user adds cell. There an
BTS3900, BTS3900 ELLOP
MOD UTRANNCELL are 32 priorities
existed MO. When this NO
LTE
LST UTRANNCELL altogether.
parameter is The setpriority
to
ADD UTRANNCELL has a positive
BTS3900, BTS3900 Indicates the name
AUTO_MODE, the of
MOD UTRANNCELL correlation with thecan NO
LTE the local cell.
ANR-related MOs
LST UTRANNCELL value of this
ADD UTRANNCELL be modified
Indicates theorname
BTS3900, BTS3900 parameter.
removed byNote the user thatof
MOD UTRANNCELL
ADD the
the UTRAN
value on 0 indicates NO
LTE or based the ANR
LST UTRANNCELL
UTRANNFREQSCELL neighboring
that cell.
ADD
OP UTRANNCELL algorithm. The MO to
blind handovers
BTS3900, BTS3900 the neighboring cell
MOD
LST UTRANNCELL
ADD removal is successful NO
LTE are not allowed.
LST UTRANNCELL
UTRANNFREQSCELL
UTRANNFREQSCELL even if thethe
Indicates MO celldoes ID of
BTS3900, BTS3900 OP
OP not local
the exist.cell. An MO It can
ADD
LST be addedidentifiesboth by the YES
LTE MOD uniquely a
UTRANNFREQSCELL
UTRANNFREQSCELL
UTRANNFREQSCELL user and
Indicates based
cell within an downlink
the on the
eNodeB.
BTS3900, BTS3900 OP
OP
OP ANR algorithm.
UARFCN of the If an
LST existed MO is to be YES
LTE MOD
RMV neighboring UTRAN
UTRANNFREQSCELL
UTRANNFREQSCELL
UTRANNFREQSCELL added,
frequency. the MO is
BTS3900, BTS3900 OP
OP
OP Indicates
modified when the IDthe of the
YES
LTE MOD
RMV operator.
user performs the
UTRANNFREQSCELL
UTRANNFREQSCELL Indicates
addition, but the itworkingcannot
ADD UTRANNFREQ
BTS3900, BTS3900 OP
OP UTRANNFREQ mode supported
be added based on by thethe
MOD NO
LTE RMV UTRAN
ANR algorithm.in the current
LST UTRANNFREQ Indicates the RXWhen level
UTRANNFREQSCELL
ADD UTRANNFREQ UARFCN.
Indicates
the ANR-related
Indicates the
theamaximum MOs
BTS3900, BTS3900 required for
OP UTRANNFREQ
MOD power
are that
automatically
TDD/FDD
neighboring the
mode UE oncan
of the NO
LTE Indicates
apply to thecell
transmission minimum the
LST UTRANNFREQ added
inter-RAT
Indicates
UTRAN based UTRAN.
the
frequency on the to
ADD UTRANNFREQ quality
on level
thealgorithm,
UTRAN required
ANR
frequency this
BTS3900, BTS3900
MOD UTRANNFREQ for a cell aonoffset
become
frequency.
candidate
Ittheis
of the
used
LTE parameter
Indicates
cell
for on the
selection. theis
UTRAN set
minimum
It is to in NO
LST UTRANNFREQ UTRAN
criteria S frequency
to calculate to
AUTO_MODE
RX level ain
frequency.
included required by
Itcriteriafor Sa
ADD UTRANNFREQ become
the compensated candidate
BTS3900, BTS3900 default.
neighboring
determines
and used Whenin the cell
the the on the
MOD UTRANNFREQ for reselection.
power. For details, This see NO
LTE ANR-related
UTRAN
probability
evaluation frequency
of MOscell are
triggering
forapplied to
LST UTRANNFREQ parameter
3GPP TS is
25.104.
added
become
measurement
selection. by a the
candidate
During theuser,
reports this
ADD UTRANNFREQ only to reselection to
BTS3900, BTS3900 parameter
for reselection
events
evaluation can
B1
for andbe
if
cellthe set
B2.
MOD UTRANNFREQ UTRAN FDD cells. A NO
LTE to
ForAUTO_MODE
priority of the
details,
reselection, see
the or
3GPP
LST UTRANNFREQ neighboring cell UE on the
ADD UTRANNFREQ MANUAL_MODE.
frequency
TS 36.331.
performs is higher
the following
BTS3900, BTS3900 UTRAN frequency can
MOD UTRANNFREQ than thataofcandidate
calculation:
become the serving
Srxlev = NO
LTE frequency. After
LST UTRANNFREQ Measured
for reselection RSRP only value
ADD UTRANNFREQ measurements
when the signalare
of a neighboring cell
quality
BTS3900, BTS3900
MOD UTRANNFREQ started
on thecell
of the for is
frequencyneighboring
better- NO
LTE
LST UTRANNFREQ cells
Value on
than the ofthe thisUTRAN
value of this
frequency,
parameter.-the UE
parameter
reselects
Compensated to a power.
neighboring
If Srxlev for acell on the
frequency
neighboring only cellifisthe
RX level
better than of a the cell is
threshold
higher than
for a time-to-trigger, the value
Indicates
for reselection
Indicates
level required the
the priority if the
RSRQ-
for a
Indicates
for
based the
priority minimum
Indicates thecell
neighboring the
neighboring
of the priority
priority RXthe
on
for
UTRAN
level
for the
frequency neighboring
required
a neighboring
frequency frequency
is
to lower for a to a
become
UTRAN
carry
than
UTRAN PS
that
neighboring frequency
candidate for serving services.
of
frequency the
cell onIn to
tothe
carry
frequency.
frequency
carry
reselectionCS+PS
coverage-based
CS services. toAfter
if become
the In a inter-
combined
RAT PS handovers,
measurements
candidate
coverage-based
RSRQ-based services.
for priority are inter- In
if
measurement-based
UtranFreqLayerMeasS
started
reselection
RAT
of theSRVCC for
frequency neighboring
if the
or CSFB is
ADD UTRANNFREQ CSFB isto UTRAN,
BTS3900, BTS3900
MOD UTRANNFREQ
witch
cells
Indicates
RSRQ-based
to on
UTRAN,
higher turned
thanthe the UTRAN
ifthat on,ofifthe
priority the NO
LTE UtranCsfbSteeringSwit
eNodeB
frequency,
frequency
of the frequency
Indicates
UtranFreqLayerMeasS
serving determines
thecontrol
priority
the
frequency. UE is
LST UTRANNFREQ ch
the and
UTRAN frequency
ADD UTRANNFREQ reselects
based
lower
policy
witch
After is on
than
on to
which
thata on,
ANR-related
turned
measurements ofthe thethe
BTS3900, BTS3900 UtranFreqLayerMeasS
to be
neighboring
eNodeB
serving
MOs,
eNodeB delivered
which selects
frequency.
determines celltoon
can abe a theUE
MOD UTRANNFREQ are started for NO
LTE witch
based
frequency
target
After
defined areon turned
frequency
measurements
by PSonly
the service
if on,
the
for
LST UTRANNFREQ the UTRAN frequency
neighboring cells onor
user
ADD UTRANNFREQ the
RX
blind
are
be
to
thebe eNodeB
priorities.
level
started
based
UTRANdeliveredof
redirection The
on the
for eNodeB
serving
toora UE
Automatic
frequency,
BTS3900, BTS3900 determines
delivers
cell is lower the the
UTRAN
than aona
MOD UTRANNFREQ contains
neighboring
Neighbor
based on
the UE reselects to a frequency
Relation
CS cells
service NO
LTE UTRAN
frequency
specified
in a frequency, frequency
measurement with
threshold the to
LST UTRANNFREQ the
(ANR)
priorities.
neighboring algorithm.
The cell the
eNodeB onUE the
ADD UTRANNFREQ be
and delivered
highest
reselects
When
delivers
frequencythat
configuration.thisPSof
thetoonly a to
priority
the
parameter
UTRAN If a
cell
cell a
if the UE is in
to
blind
on is
BTS3900, BTS3900 RRC_CONNECTED
MOD UTRANNFREQ the
higher
the
set UE
redirection
frequency
to
frequency
RSRQ-based by default.In
than isthe
with value
triggered
only
RX the if
level NO
LTE mode based on the
LST UTRANNFREQ blind
specified
and
the handovers
the
MANUAL_MODE,
highest
of the RSRQ-based
cellCS by
target this
ispriority
higher toRX the
to
ADD UTRANNFREQ priority
UTRAN,
parameter
neighboring
level
ANR-relatedof specified
the the for target
cell
serving
MOsa isby
time- cell
not
cancell
BTS3900, BTS3900 the UE
than the value by default.In
MOD UTRANNFREQ this
for aparameter.
blind handover The NO
LTE to-trigger.
specified,
is
be lower
blind modified
specified than
handovers byFor
the or
this details,
aeNodeB for is
LST UTRANNFREQ eNodeB
ADD UTRANNFREQ
selected
see
selects
specified
removed
CSFB
parameter3GPP toapreferentially
based
by TS
target
threshold
UTRAN,
for only on
a36.331.
time-theifPS
BTS3900, BTS3900 delivers
service
frequency
and
user. that
A the
priorities.
failure
UtranFreqLayerBlindSof
to-trigger. For details, based
theUTRAN cell The
on is
MOD UTRANNFREQ frequency
cell on the with
UTRAN the NO
LTE this
higher
message priority.
Indicates
witch
see than
is turned
3GPP is
whetherIf
the a
displayed
TSthreshold value
on, the
36.331. to
LST UTRANNFREQ Indicates
highest
frequency CS+PSthe
with the
ADD
ADD UTRANNFREQ measurement
specified
when
set
target thethe by
routing
cell user
for thisaaddsblindan
area
BTS3900, BTS3900 UTRANEXTERNALCE for removing
combined
highest
configuration
parameter
existed
code (RAC) PSis
MO. service
for aisathe
priority
When
of to
time- beis
this
MOD UTRANNFREQ handover selected NO
LTE LL neighbor
priority
selected
delivered,
to-trigger.
parameter
external to relationship
bythe
the
For
is set UE.
eNodeB
details,to In
LST UTRANNFREQ based onUTRAN CS service cell.
ADD with
blind aparameter
default.When
preferentiallycell by
CSFB toANR UTRAN,
this
delivers
BTS3900, BTS3900
MOD see
AUTO_MODE,
This 3GPP
priorities. TheTS 36.331.
cellthe
must on a
UTRANEXTERNALCE
UTRANEXTERNALCE based
Indicates
if
parameter
frequency
ANR-related
be set on
to the
whether
is
with handover
set
MOs the to the
can NO
LTE the UTRAN frequency
LL success
external rate.
UTRAN
UtranCsfbSteeringSwit
Priority_0
highest The
forora UTRAN cell
LL be the priority.
modified
CFG(Configure)
with highest IfCS
ifthisthe
ADD
MOD threshold
supports
ch and is
frequency,
priority isthe
single
set the to radio
UTRAN
0 for
BTS3900, BTS3900 LST removed
external
priority
Indicates by
isUTRAN
selected
the therouting user
cell bya
UTRANEXTERNALCE
UTRANEXTERNALCE
UTRANEXTERNALCE percentage
voice
frequency
frequency,
or based
supports call
UtranFreqLayerBlindS on of
continuity
isthis
packet not
the the ANR NO
LTE default.When
area code. this
LL
LL number
(SRVCC)
witch
included
frequency
algorithm. areofin successful
for
turned
isPS
The not on,
service
LL
ADD switched
parameter (PS)is setMO to
MOD
LST handovers
concurrent
the target
priority
selected
removal
services. to
CS
cell
arrangement.
as
is the the
successfulis and
targettotal PS
BTS3900, BTS3900 UTRANEXTERNALCE Priority_0 for a UTRAN
UTRANEXTERNALCE
UTRANEXTERNALCE number
services.
selected
frequency of
if the for If
basedhandovers
this on the NO
LTE LL
even
frequency, theaUTRAN
MO blind
does
LL
LL from
parameter
priority
Indicates thespecified
redirection.
not exist. local
the
An isAnot setcellto
threshold
MOlarger by
canto
MOD frequency is
BTS3900, BTS3900 LST the
above
value
be neighboring
BOOLEAN_FALSE,
this parameter.
which
indicates
addedinboth a a cell.
The
UTRANEXTERNALCE included CS by service the
NO
LTE UTRANEXTERNALCE For
the
cell example,
external
on
neighboring
higher
user and the
priority. UTRAN
based cellanon
UTRAN is the
LL priority arrangement.
LL external
cell
added does
frequency
Indicates
ANR forcell
algorithm. not
awith
the issupport
serving
totalthe
If an
LST configured
SRVCC
highest for
priority as a
concurrent
BTS3900, BTS3900 MOD ANR cell
number
existed by ANR. MO isThe
of handovers toisbe NO
UTRANEXTERNALCE neighboring cell
LTE LST ANR CS aand
preferentially
threshold
to
added, PS
neighboring
the isMO services.
expressed isfor
selected. cellall
LL cells
If
Indicates
as this
above a under
parameter
success
which the an rate
ANR isofset
modified when the
BTS3900, BTS3900 MOD ANR eNodeB,
to Priority_0,
measurement
handovers
determines
user performs this from the
whether period
the the to NO
LTE LST ANR neighboring
UTRANon
based
serving
remove
addition, frequency
cell
the which
but tocell
it the
neighbor ANR
cannot is
permits
not
determines
included
neighboring
relationship
be added based automatic whether
in priority
cell.
with this
on the to
BTS3900, BTS3900 MOD ANR removal
arrangement
remove a of the
neighbor for
cell
ANRfrom algorithm.the NRT The or NO
LTE LST ANR neighboring
relationship with
UTRAN a
set the NoHoFlag
preceding control
relationship
frequencies
neighboring
parameter
policy also of by
to
cell
applies this ANR
carryfromcellto
BTS3900, BTS3900 MOD ANR and the ctrlmode
CS+PS
the
to
the NRTcombined or set theis NO
LTE LST ANR Auto_Mode. Ifnumber
the
services.
NoHoFlag
FORBID_HO_ENUM
UtranExternalCellPlmn
Indicates theparameter
BTS3900, BTS3900 MOD ANR success
of
on
MO,
of the
the which
periodic rate
neighboring
basisisof of
a thechild cell
handovers
to
handover
MO of the from
success each NO
LTE LST ANR measurement reports
cell underthe
FORBID_HO_ENUM
Indicates
rate.
UtranExternalCell theintervaleNodeB
sent for fast ANR. MO.
BTS3900, BTS3900 MOD ANR to
on
at
When this
the the
which neighboring
basis periodic of
ANR-related theANR cell
Indicates
Indicates
is lower thanthe
the fast
reference
or equal NO
LTE LST ANR handover
measurement
MOs
checking success
timer.reports
are automatically When
signal
to this received
threshold power
after
rate.
Indicates
are
added
the sent
timer basedforthe
is fastmaximum
on ANR.
expired, the a
BTS3900, BTS3900 MOD ANR (RSRP)
measurement
allowed threshold
number period,
of for
ANReNodeB
the algorithm, this NO
LTE LST ANR intra-RAT
the
UEs corresponding
that perform fast ANR. If
parameter
automatically is set checks tointra-
the
RAT signal
external
Indicates cell
measurements quality
the and
maximum in
the a
AUTO_MODE
whether torelationship
disable by fast
BTS3900, BTS3900 MOD ANR neighboring
neighbor
allowed
for fast number
ANR. E-UTRAN
After of the
default.
ANR. When the NO
LTE LST ANR cell
with
UEs reported by the UE
ANR-related MOsinter-
number this
that cell
of perform
UEs are are
is
RAT lower
automatically
performing than
measurements the
removed.
intra-RAT
BTS3900, BTS3900 MOD ANR added by the user, this
threshold,
for fast ANR.
measurements theAfter cell
for is the
fast NO
LTE LST ANR parameter
Indicates can be set
not
number
ANR
to reaches
AUTO_MODE ofthe
automatically UEs threshold
the or
above
added
performing
maximum which
as an the
external
inter-RAT
number,
BTS3900, BTS3900 MOD ANR MANUAL_MODE.
eNodeB
cell of theenters
measurements
intra-RAT eNodeB. thefast
for NO
LTE LST ANR monitoring state forfast
ANR reaches the
measurements for
intra-RAT
maximum
ANR will not be fast
number, ANR.
BTS3900, BTS3900 MOD ANR
The
inter-RAT
performedthreshold on other is NO
LTE LST ANR
expressed
measurements
UEs. as the for fast
number
ANR willofnot UEs be that
have
performed performed on other
measurements
UEs. for
intra-RAT fast ANR.
relationships
the number ofhas
reached
neighborthe maximum
relationships
Indicates
or
in whether
the NRT the to
has mode for
Indicates
optimizing
periodically the threshold
neighbor
reached
above whichtheremove maximum
the
relationships.
redundant
and a new neighborIf this
neighbor
eNodeB
parameter
relationships enters
is set
from the tothe
relationship
monitoring needs
state forto
FREE,
NRT.
be added thetoeNodeB the NRT
inter-RAT
automatically
Consider fast the
that ANR.
BTS3900, BTS3900 MOD ANR by ANR.
The
optimizesthreshold neighbor is NO
LTE LST ANR number
This of neighbor
parameter is also
expressed
relationships asin the
using the
used
number to determine
ofreached
UEs thatits
BTS3900, BTS3900 MOD ANR ANR.
NRT
external
Indicates If this
has theparameter
cell removal
switch
have performed NO
LTE LST ANR is setan
maximum,
from to enable
NCL. a new Within
used
measurementsto or
for
CONTROLLED,
neighbor
four consecutive relationship the
BTS3900, BTS3900 MOD ANR disable
inter-RAT proactive
fast ANR. PCI
eNodeB
needs
measurement reports
todetection.
be added the
periods, by NO
LTE LST ANR conflict
neighbor
ANR. Ifathe
if the neighbor
Within relationships
total
specified
to be optimized
number
relationship
duration ofafterhandoversthis to the
BTS3900, BTS3900 MOD ANR U2000 and the
(of all
correspondingtypes)
switch is turned on, from to the
an the NO
LTE LST ANR optimization is subject
local
Indicates
external cell
eNodeB delivers to
the
cell itsin the
Indicates
to manual
neighboring the start
cells in
cell time
BTS3900, BTS3900 MOD ANR NCL isactive
measurement
of the not added PCI tothe
confirmation.
last
adding
the measurement
NRT policy
and for
the fast
local NO
LTE LST ANR configurations
conflict detection. for
period
automatic
eNodeB
proactive
Indicates specifiedneighbor
isthe
PCI not byIftime
conflict
stop
the
the
stop time
StatisticPeriodForNRT
relation is
(ANR). earlier Ifan this
BTS3900, BTS3900 MOD ANR configured towith
detection
of
than theoractive
Indicates
Del
parameter
parameterthe theis
UEs
samePCI
received
set reaches
toasX2
that NO
LTE LST ANR interface
meet
conflict specific with
detection. the peer
If the
the
signal
this start
NCL_MODE, code
parameter time, power the
all value, stop
eNodeB
requirements.
stop
time time
is providing
is
assumed earlierThen, to thebe
BTS3900, BTS3900 MOD ANR (RSCP)
the
neighboring
eNodeB
Indicates
external threshold
the
cell, cells
isreceived
this for
the
than
the
fast eNodeB
or the
time
ANR of withthe starts
same next
UTRAN. as the NO
LTE LST ANR triggered
measured
signal
external
detection strengthto
cell byremove
based isfast ANR a
the
day.
If the startsignal time, qualitytheon stop the
in a
neighbor
are
removedadded
indicator
measurement
time is assumed relationship
fromto
(RSSI) thethe
reportsto be
BTS3900, BTS3900 MOD ANR neighboring
Indicates
from
neighboring
threshold
NCL. the
This the
NRT.
for UTRAN
pilot
cell
fast
parameter list
ANRis
from
the the
time UEs.
of the next NO
LTE LST ANR cell
with
also reported
strength
In
(NCL).
periodic
GERAN.
used If threshold
this
to by
redundant
If thefor
the
determine UE
day.
is
fastlower
ANR thanwith the
neighbor
parameter
signal quality
redundant neighbor relationship
is set
in a to
BTS3900, BTS3900 MOD ANR Indicates
threshold,
CDMA2000
removal,
NCL_NRT_MODE, the
thethe pilot
1xRTT.cell isall
eNodeB If
neighboring
relationship GERAN
removal NO
LTE LST ANR strength
not
the automaticallythreshold infor
fromsignal
removes
neighboring
cell reported
the NRT. quality
redundantcells
byThe the a
UE
fast
added ANR
neighboring
neighbor
measured
is lower asthan with
anbyexternal
relationships
fast ANR
the
BTS3900, BTS3900 MOD ANR neighbor relationship
CDMA2000
cell
if
arethe of
CDMA2000
added
threshold, the
total HRPD.
eNodeB.
1xRTT
number
to
the thecellNCL is If
ofcell NO
LTE LST ANR with the neighboring
the signal
reported
handovers
and
not neighboring by quality
the
(of all UE in
cells a
is
cell automatically
to which no UEs
neighboring
lower
types)
with
added the than
from
asstrongest
an the
the local
external
BTS3900, BTS3900 MOD ANR are handed over from
CDMA2000
threshold,
Indicates
signal
cell to all
of arecell
the the
the HRPD
neighboring
added
eNodeB. celltoiscell
threshold the NO
LTE LST ANR the local
Indicates thethe within
period
reported
not
for
cells automatically
enabling
neighboring
reaches by mobility-
relation
this UE isof
four consecutive
measurement forwithin
BTS3900, BTS3900 MOD ANR lower
added
related
parameter
table than
as an
parameter
(NRT) theexternal
value
measurement
MRO. During periods
the NO
MOD threshold,
cell of
optimization the
the eNodeB. basedcell is
LTE LST ANR four
simultaneously.
is consecutive
removed
period, the from
number theon
not
ENODEBALGOSWITC the automatically
handover
measurement
Currently,
NRT. onlysuccess the of
periods
BTS3900, BTS3900 H handovers
added
rate.
specified as an is
If thebyhandover
inter-frequency external
the
None.
measured
cell of therate and
eNodeB. NO
LTE LST success
StatisticPeriodForNRT
neighboring is less
cell,
ENODEBALGOSWITC abnormal
than or equal
Del parameter.
neighboring scenarios to this
UTRAN
BTS3900, BTS3900 MOD
H MRO (including
parameter
cell,
Indicatesand neighboringpremature
thevalue, reference NO
LTE LST MRO handover,
Indicates
mobility-related
GERAN
signal receivedthe
cell delayedthreshold
with powerthe
handover,
of the
parameters
strongest
(RSRP)
Indicates number and
threshold are
signal
the of
time ping-
can for
BTS3900, BTS3900 MOD MRO pong
handovers
Indicates handover) the required
referenceare for
optimized
be
the added
serving
threshold to
for reduce
cell.
the
ping- The
NRT, NO
LTE LST MRO Indicates
identified.
enabling the
After
MRO. threshold
the
MRO
signal
the
and
pong
for number
threshold
the
the
received
intra-
handover. is
percentage of
used power
If toaof is
period
applied
(RSRP)
premature
frequency
identify
UE is elapses,
and
threshold
abnormal
handed or parameter thefor
delayed
neighboring
over
BTS3900, BTS3900 MOD MRO intra-RAT
eNodeB
Indicates ping-pong
makes
the a The
threshold
adjustment
neighboring
handovers.
cell
coverage
back and to the inisIf
neighboring
sourcestarted
acells.
the
serving cell NO
LTE LST MRO handovers.
decision on Ifparameter
the
for
only the
threshold
handover
CDMA2000
cell.
after if
If a percentage
the
staying UE number
is used
success
cell
in thewithtoofof
rate
percentage
adjustment.
coverage-induced
handovers
identify coverage- of intra-
from the
BTS3900, BTS3900 MOD MRO is
the greater
successfully
target
RAT strongest
cell
ping-pong than
for a this
signal
period
abnormal
local
induced
parameter
cannot cell
reestablishes be tohandovers
abnormala
value,
added an RRC to the to NO
LTE LST MRO shorter
handovers than is this
greater
all
NRT. abnormal
neighboring
handovers
mobility-related
connection
threshold, The from
intra-
theor cell the
eNodeB
than
handovers
reaches
serving thiscell parameter
this from
to threshold.
the the
BTS3900, BTS3900 MOD MRO parameters
frequency
reaccess
decides the
that are
neighboring
aserving
ping-
value,
serving
neighboring parameters
cell to cell.a If are
a NO
LTE LST MRO optimized
cells
cell
pong after
and
handover a toradio
reduce
neighboring link
occurs
adjusted
neighboring
UE successfully to reduce
cell. If the
the
the
based
number number
CDMA2000
failure (RLF)
onofthe of
cells
or ping-
a can
history
ping-pong
BTS3900, BTS3900 MOD MRO percentage
reestablishes
pong
only
handover be
information handovers.
added exceeds
failure,
about an to RRC the
this
handovers. If the NO
LTE LST MRO this
NCL
UE
UE. threshold
connection
sends
regardless theor when
eNodeBof the a
percentage
mobility
reaccess is
robustness
the less
serving
parameter
an
than RLF or equalreport,setting.towhichthis
BTS3900, BTS3900 MOD MRO optimization
cell after a radio (MRO) link
includes
parameter the RSRP
value, NO
LTE LST MRO period
failure approaches
(RLF) or a its
values
parameters of theare servingnot
end,
handover
cell the eNodeB
and neighboring
Indicates failure,
the threshold does
the
BTS3900, BTS3900 MOD MRO adjusted.
not adjust MRO-
UE
cell.
for thesends
If the number the
RSRP eNodeB
ofvalue NO
LTE LST MRO related parameters
an
of theRLFserving
pingpong report,
handovers. which
cell isof If
BTS3900, BTS3900 MOD MRO the neighboring
includes
lessnumber
the than this the ofRSRP cell
within
values
parameter this
of the period.
value serving and NO
LTE LST MRO consecutive ping-pong
cell
the and
RSRP
handovers reaches neighboring
value of the the
cell. If the RSRP
neighboring
threshold, the cell UEisvalue islessa
of
than thethe
ping-pong serving UE.cell is
less than the
NeighborRsrpThd
ServingRsrpThd
parameter value, this
parameter
RLF or handover value and
the
failureRSRP is inducedvalue ofbythe
Indicates the index of
a simulated load
Indicates
configuration. the RB One BS
BTS3900, BTS3900 LST SIMULOAD usage threshold of a
can store 10 simulated YES
LTE MOD SIMULOAD simulated load
load configurations,
Indicates
which arethe
configuration. power
If the RB
identified by
BTS3900, BTS3900 MOD SIMULOAD usage
LTE LST SIMULOAD the indexes. isof a
usage threshold
of a cell NO
simulated
below this load threshold,
configuration.
the simulated load If the
BTS3900, BTS3900 MOD SIMULOAD
power usage
schedulingthe
Indicates of a cell
is reporting NO
LTE LST SIMULOAD
is below
performed. this
period for simulated threshold,
BTS3900, BTS3900 MOD SIMULOAD Indicates
the The the
load.simulated value switch
load 0
that is
scheduling
Indicates used the control
to
is NO
LTE LST SIMULOAD indicates that
whether
simulatedtoload
performed.
measurement enableperiod
is notand
BTS3900, BTS3900 MOD SIMULOAD disable
for the
simulated
reported. frequency-
load. The
selective scheduling NO
LTE LST SIMULOAD value 0 indicates thatin
simulated
simulated load load is not
BTS3900, BTS3900 MOD SIMULOAD configuration.
measured. If the
NO
LTE LST SIMULOAD switch is set to ON, the
MOD Indicates whether
frequency-selective
Indicates the maximum to
BTS3900, BTS3900 TCPACKCTRLALGO Indicates
enable
scheduling or the
disablethreshold
is enabled. the
downlink
for the throughput
value theto in NO
LTE LST TCP
If
thetheTCPACK
switchACK isofcontrol
control set
MOD
TCPACKCTRLALGO MSS
Indicatesfield
algorithm.
Indicates
OFF, in packets
the
the
the frequency- switch
timer
algorithm.
for TCP link If setups.
this If
BTS3900, BTS3900 TCPACKCTRLALGO used
length
diversityto enable
forscheduling
the TCP orto 0,is
parameter
the TCP MSS is set
function NO
LTE LST disable
ACK
used. the TCP
control algorithm. MSS
MOD the
is downlink
enabled, thebe
TCPACKCTRLALGO function.
This timerIf can this switch
used
BTS3900, BTS3900 TCPACKCTRLALGO throughput
eNodeB first inchecks
the TCP
is
to
ACK turned
control
controloff,
traffic TCP of the NO
LTE LST the MSS
packets
ACKs to fieldalgorithm
are
uplink inTCP each
TCPACKCTRLALGO is not under
packet control.
fortherefore
TCP link
transparently
packets,
BTS3900, BTS3900 MOD TCPMSSCTRL setups.
LTE LST TCPMSSCTRL preventing traffic of
transmitted If the value
without NO
the
being
burstsMSS fielddownlink.
processed.
in the is If
greater than
this switch is turned the
BTS3900, BTS3900 MOD TCPMSSCTRL
predefined
on, the value threshold,
of the NO
LTE LST TCPMSSCTRL
the
MSSeNodeBfield in changes
each
Indicates
the
packetvalue forthe
ofTCPthenumberMSS
link
BTS3900, BTS3900 MOD TPEALGO
of ports
field to that
the
setups can be enable
predefined NO
LTE LST TPEALGO
TCP acceleration.
threshold.
modified. Then, the
Indicates port 1 to
eNodeB recalculates
BTS3900, BTS3900 MOD TPEALGO
which
the TCP TPE is to be
checksum NO
LTE LST TPEALGO
applied.
and retransmits the
Indicates port 2 to
BTS3900, BTS3900 MOD TPEALGO packet with modified
which TPE is to be NO
LTE LST TPEALGO fields. For other
applied.
packets,
Indicatesthe porteNodeB3 to
BTS3900, BTS3900 MOD TPEALGO transparently transmits
which TPE is to be NO
LTE LST TPEALGO them.
applied.
Indicates port 4 to
BTS3900, BTS3900 MOD TPEALGO
which TPE is to be NO
LTE LST TPEALGO
applied.
Indicates port 5 to
BTS3900, BTS3900 MOD TPEALGO
which TPE is to be NO
LTE LST TPEALGO
applied.
Indicates port 6 to
BTS3900, BTS3900 MOD TPEALGO
which TPE is to be NO
LTE LST TPEALGO
applied.
Indicates port 7 to
BTS3900, BTS3900 MOD TPEALGO
which TPE is to be NO
LTE LST TPEALGO
applied.
Indicates port 8 to
BTS3900, BTS3900 MOD TPEALGO
which TPE is to be NO
LTE LST TPEALGO
applied.
Indicates port 9 to
BTS3900, BTS3900 MOD TPEALGO
which TPE is to be NO
LTE LST TPEALGO
applied.
Indicates port 10 to
BTS3900, BTS3900 MOD TPEALGO
which TPE is to be NO
LTE LST TPEALGO
applied.
Indicates port 11 to
BTS3900, BTS3900 MOD TPEALGO
which TPE is to be NO
LTE LST TPEALGO
applied.
Indicates port 12 to
BTS3900, BTS3900 MOD TPEALGO
which TPE is to be NO
LTE LST TPEALGO
applied.
Indicates port 13 to
BTS3900, BTS3900 MOD TPEALGO
which TPE is to be NO
LTE LST TPEALGO
applied.
Indicates the policy for
Indicates
configuring port the14 to
BTS3900, BTS3900 MOD TPEALGO
which TPE
following parameters: is to be NO
LTE LST TPEALGO
applied.
Certificate
Indicates port Update 15 to
BTS3900, BTS3900 MOD TPEALGO Source
which TPE CA IP, is toURL be NO
LTE LST TPEALGO During
applied.Site
Deployment,
Indicates portand 16 to
BTS3900, BTS3900 MOD TPEALGO Source IP for Applying
which TPE is to be NO
LTE LST TPEALGO for a Certificate During
applied.
Indicates
Site Deployment.port 17 to
BTS3900, BTS3900 MOD TPEALGO
which TPE
When the parameter
is to be is NO
LTE LST TPEALGO
applied.
set to
Indicates port 18 to the
DEFAULT_MODE,
BTS3900, BTS3900 MOD TPEALGO
which
UPDSIP, TPE is to be NO
LTE LST TPEALGO
applied.
INITREQURL, and
Indicates
INITREQSIP port
the maximum19 to
BTS3900, BTS3900 MOD TPEALGO
which TPE
UL voice packet
parameters is to
do not be
delay NO
LTE LST TPEALGO
applied.
variation
need to beallowed
configured. on
Indicates
the Uu port 20 If
interface. tothe
BTS3900, BTS3900 MOD TPEALGO When a certificate
which
actual TPE
delay to beis
isvariation NO
LTE LST TPEALGO initially obtained during
applied.
of
sitea deployment,
UL voice packet is
BTS3900, BTS3900 MOD VQMALGO exceeds this
manually applied limit,for,this
NO
LTE LST
ADDVQMALGO
CA packet
or is is regarded or
automatically as
Indicates
lost during thethe URL of
BTS3900, BTS3900 LST CA manually
the CA. The updated, the
WCDMA, BTS3900 MOD CA
Indicates
evaluation
base station theofURL voicecan
name
uses theof
YES
be
the either
CA.
quality an HTTP
impact (VQI). or
LTE REQ DEVCERT effective
HTTPS IP address
URL. The IPisof
BTS3900, BTS3900 ADD
RMV CA
CA The
the delay
local
Indicates OM variation
the channel
signature
address
measured in the
at message
the URL
WCDMA, BTS3900 MOD CA as thebe
algorithm
Indicates source for
the address,
source NO
must
eNodeB a
PDCPvalid IP
layer.
LTE LST CA and
of the URL
CMP.
address The
for as the
signature
certificate
BTS3900, BTS3900 ADD CA address. The default
destination
algorithm
management, can address.
be
such
WCDMA, BTS3900 MOD CA port
When
number
Indicates this the isURL
parameter
80 for ofasis NO
Secure
automatic
HTTP
the CA Hash
orthat
443 is Algorithm
certificate
for
used
LTE LST CA set to manual
BTS3900, BTS3900 ADD CA 1 (SHA1)
update,
HTTPS.
during siteor Secure
CFG_INIT_UPD_ADD
Hash Algorithm
WCDMA, BTS3900 MOD CA certificate
deployment.
R, the base The256
update,
station
and
URL NO
LTE LST CA (SHA256).
manual
Indicates
can be certificate
the
either an HTTPsource IP
BTS3900, BTS3900 ADD CA uses
address INITREQSIP
application. forURL. If the
the BS and
to
or HTTPS
INITREQURL as In the
theto
WCDMA, BTS3900 MOD CA source
access
URL, the address
the IPCA address for
and NO
LTE LST CA source
certificate
initially and destination
application
must
addresses beobtain
a valid a IP
for initially
BTS3900, BTS3900 ADD CA in site deployment
certificate. This is
address,
Indicates
obtaining and
the the
file
aiscertificate name
WCDMA, BTS3900 MOD CA not configured,
parameter the NO
default
of a device
during portdeployment
site number is
certificate.
LTE LST CA address
mandatory willwhen be used thefor
BTS3900, BTS3900 ADD CA 80
The
and forfileHTTP
UPDSIP name or 443
cannot
and URL
ADD as
CA the
HTTPS.uses source
different
This address
WCDMA, BTS3900 MOD CERTMK
CA include
as
for the any of and
source
acquiring the
the NO
DSP CERTMK URLs
parameter
following in the following
isaddresses
characters:
LTE LST CA destination
certificate for the first
BTS3900, BTS3900 REQ DEVCERT scenarios:
mandatory
backslashes
Indicates when
the (\), the
file name
for
time.
-The automatically
BS initially and
WCDMA, BTS3900 RMV CERTMK CA
of anuses
slashes
manually
Indicates different
(/),
activated colons
updating
the device (:),
a YES
LTE DSP
UPD APPCERT
DEVCERT obtains
URLs
asterisks
certificate. a (*),
during certificate
The site
question
file
certificate
application
during sitetheand
type forof
BTS3900, BTS3900 LST
DSP APPCERT
CMPSESSION deployment
Indicates
marks
name
manually (?),
cannot orfile
double
applying includename
for
activated
deployment. device
WCDMA, BTS3900 MOD APPCERT
LST CERTMK certificate
of the
quotation
any
a trusted update.
marks
of the following
certificate. When ("), the YES
certificate.
-A certificate There are
is file (<),
LTE TST APPCERT
MOD APPCERT certificate.
left angle
characters:
parameter The
brackets
is set to
BTS3900, BTS3900 two types:
updated. IKE and
LST CERTTYPE
TST APPCERT name
right
backslashes
CFG_UPD_SIP,cannot
angle include
brackets
(\), the
WCDMA, BTS3900 SSL. NO
DSP APPCERT any
(>),
slashesof
and thebars
INITREQURL and (:),
(/), following
(|).
colons
LTE ADD TRUSTCERT characters:
BTS3900, BTS3900 LST APPCERT asterisks
INITREQSIP (*), question
DSP TRUSTCERT backslashes
marks
parameters (?), double do(\),not
WCDMA, BTS3900 YES
RMV TRUSTCERT slashes
quotation
need to bemarks (/), colons
configured. ("),(:),
LTE
LST TRUSTCERT asterisks
left angle (*),
brackets
When a certificate is question (<),
marks
right (?),
angle double
brackets
initially obtained during
quotation
(>),
site and bars
deployment, marks (|). ("),
is
left angle brackets
manually applied for, (<),
right angle
or is automatically or brackets
(>), and bars
manually updated, (|). the
base station uses the
Indicates the file name
of a CRL. The file
name cannot include
any of the following
characters:
ADD CRL
BTS3900, BTS3900 backslashes (\),
DSP CRL
WCDMA, BTS3900 slashes (/), colons (:), YES
RMV CRL
LTE asterisks
Indicates (*), the question
IP
BTS3900, BTS3900 LST CRL
ADD CRLTSK marks
address of double
(?), the master
WCDMA, BTS3900 quotation marks ("), NO
LST CRLTSK FTP server or master
LTE left angle
Indicates brackets
the user (<),
BTS3900, BTS3900 LDAP server.
ADD CRLTSK right
nameangle usedbracketsto log in to
WCDMA, BTS3900 (>),FTP
and server
bars (|). NO
LST CRLTSK an or
LTE Indicates the password
BTS3900, BTS3900 LDAP server.
used to log
Indicates theinfile to an name
WCDMA, BTS3900 ADD CRLTSK NO
FTP serverThe
of a CRL. or LDAP
file
LTE
BTS3900, BTS3900 server.
name
Indicates cannot the port include
ADD CRLTSK any of the following
WCDMA, BTS3900 number of an LDAP NO
LST CRLTSK characters:
LTE server.
BTS3900, BTS3900 backslashes (\),
ADD CRLTSK
WCDMA, BTS3900 slashes (/), colons (:), NO
LST CRLTSK
LTE asterisks (*), question
BTS3900, BTS3900 ADD CRLTSK Indicates
marks (?),the doubleID of the
WCDMA, BTS3900 LST CRLTSK Indicates
task the
for periodically
quotation marks policy ("), YES
LTE RMV CRLTSK type.
obtainingThere
left angle the
Indicates the are
brackets CRL.
methodthree (<),
BTS3900, BTS3900 policies to use
ADD CRLTSK right angle
using which theCRLs.
brackets BS
WCDMA, BTS3900 The
(>), value
and bars NOVERIFY
(|). NO
LST CRLTSK periodically obtains a
LTE indicates
Indicates that
the the BS IP
source
BTS3900, BTS3900 CRL.
Indicates the name of
ADD CRLTSK does
address notfor perform CRL-
WCDMA, BTS3900 a nodecertificate
based
downloading found CRLs. in an NO
LST CRLTSK
LTE LDAP
checks
When this server.
on parameter
the peer is
BTS3900, BTS3900 device. The value
ADD CRLTSK set to 0.0.0.0, the
WCDMA, BTS3900 ALARM NO
LST CRLTSK effectiveindicates
local OMthat IP
LTE Indicates
the BS performs whether to
CRL-
BTS3900, BTS3900 address serves as the
ADD CRLTSK use
based
sourcethecertificate
SSL
IP to protect
address to
WCDMA, BTS3900 NO
LST CRLTSK the security
checks
access
Indicates on the
thewhether of peer
CRL the server
to
LTE Indicates the
BTS3900, BTS3900 connection.
device
for updating
authenticate and reports the offiles.
ID
CRL the
ADD CRLTSK Access
ALM-26832 Control Peer List
WCDMA, BTS3900 certificate of the peer NO
LST CRLTSK (ACL)
Certificateto which Expiry theif the
LTE end when SSL
BTS3900, BTS3900 access
peer control
certificate
connection is used. rule
has
SET CRLPOLICY belongs. ACL ID in the
WCDMA, BTS3900 been revoked. The NO
LST CRLPOLICY range from 3000 to
LTE ADD ACL value DISCONNECT
BTS3900, BTS3900 3999
indicates identifies
that the high- BS
LST ACL
WCDMA, BTS3900 level
performs rules based
CRL-based
Indicates the index of on YES
MOD ACL
LTE the layer
certificate
a VRF 3checks
instance. and layer Theon 4
BTS3900, BTS3900 RMV ACL Indicates theACL action
ADD ACL information.
the
UMTS peer device.
currently ID
If that
thein
WCDMA, BTS3900 taken
the range on the
from data4000 to NO
LST ACL BS finds that
supports
matches default
the the routes
ACL peer
rule.
LTE 4999 identifies
certificate has access
been
BTS3900, BTS3900 ADD ACL domainthe
When only ACL (the to VRF
control
Indicates
revoked,
index is rules
0). the
the based
brief
BS stops on
WCDMA, BTS3900 MOD ACL which
the MAC the ACL
layer rule NO
ADD ACLRULE description
the link of the ACL.
negotiation
LTE LST ACL belongs
Indicates
information. isthereferenced
ID of the
BTS3900, BTS3900 DSP ACLRULE with
by a the
packet peer device
filter, the
Access
and Control
reports ALM- List
WCDMA, BTS3900 LST ACLRULE BS accepts or YES
(ACL) to
26832 Peerwhich the
LTE ADD
MOD ACLRULE
ACLRULE transmits
ACL rule theCertificate
belongs. data that
BTS3900, BTS3900 LST
RMVACLRULE
ACLRULE Expiry.
matches If the
the BS finds
Indicates
that the CRL the ruleID ofif the
expires,
this
WCDMA, BTS3900 MOD ACLRULE parameter is set to YES
ACL
the BS rule.stops
LTE RMV ACLRULE PERMIT, andthe rejectslink
BTS3900, BTS3900 ADD ACLRULE
DSP ACLRULE negotiation with the
the data if this
WCDMA, BTS3900 DSP ACLRULE peer device. NO
parameter is set to
LTE LST ACLRULE Indicates
BTS3900, BTS3900 ADD ACLRULE Indicates the protocol
DENY. When the the ACL
source IP
type
is
addressof the
referenced of data
data by to
toan
WCDMA, BTS3900 DSP ACLRULE Indicates the wildcard NO
which
IPSec
which the
policy,
the ACL
ACLthe rule BSis
LTE LST
ADDACLRULE
ACLRULE of the source
applied. IPrule is
BTS3900, BTS3900 encrypts
applied. or
To
address. The wildcard decrypts
add an
MOD ACLRULE the data
WCDMA, BTS3900 ACL
is used ruletothat
that matches
is
determine NO
DSP ACLRULE the rule if this
LTE ADD ACLRULE applicable
which bits can to data be of all
BTS3900, BTS3900 LST ACLRULE parameter is set IP to
MOD ACLRULE source
neglected IP addresses,
when
WCDMA, BTS3900 PERMIT,
set this and
parameter does tonot NO
DSP ACLRULE address matching is
LTE perform
0.0.0.0. any encryption
LST ACLRULE being performed. It
or
candecryption
be considered on theas
data if this
the inverse of the parameter
is set to DENY.subnet
corresponding
mask.
OP_GT, the ACL rule
is applied to the data
stream
Indicates whose
the filtering source
port
condition for thelarger
number is
than or equal
destination port. to the This
configured
Indicates whether
parameter port
is valid to only
BTS3900, BTS3900 ADD ACLRULE number.
check DMPT
when theIf source
this is setport to
WCDMA, BTS3900 DSP ACLRULE parameter
number
Indicates
YES. ofthe
If this isparameter
each set
source to
data NO
LTE LST ACLRULE OP_EQ,
stream
port the used
tobefore
is setnumber OP_LT, ACL applying
therule
BTS3900, BTS3900 ADD ACLRULE is
theapplied
when
ACL ACL SMPT
rule istoapplied
rule. the
is set data toto
WCDMA, BTS3900 DSP ACLRULE stream
YES.
the data If whose
SOP
stream is source
set
whose to NO
LTE LST ACLRULE Indicates
port number theissource equal to
OP_RANGE,
destination
port number used port this
BTS3900, BTS3900 ADD ACLRULE the configured port
parameter
number
when SMPT indicates
is smaller is set than to
WCDMA, BTS3900 DSP ACLRULE number. If this NO
the
or
YES. smallest
equal If SOPto the source
is set to
LTE LST ACLRULE parameter is set to
BTS3900, BTS3900 ADD ACLRULE port number.
configured
Indicates
OP_RANGE, the port Ifthis
SOP is
OP_NEQ,
not set toIfthe
number.
destination the
OP_RANGE,
this ACL
IPwildcard
address
WCDMA, BTS3900 DSP ACLRULE parameter
Indicates
rule is applied indicates tothe the NO
LTE LST this
of parameter
parameter
data is
to which set to
ADDACLRULE
ACLRULE the
of
data largest
the destination
stream
indicates
OP_GT,
source
whose
a specific
port
IP
BTS3900, BTS3900 ACL
number.
address.rule the is
This
The ACL
applied.
wildcard rule To
MOD ACLRULE source
source
is applied port
port to number
number.
the data isis
WCDMA, BTS3900 add an
parameter
is used ACL
to to is rule
valid
determine thatonly NO
DSP ACLRULE not equal
stream whose the
LTE ADD ACLRULE applicable
when
which SOP
bits can to
is data
set betoof all
BTS3900, BTS3900 LST ACLRULE configured
destination port
port
MOD ACLRULE OP_RANGE.
neglected IP IP
when
WCDMA, BTS3900 number.
number
addresses, If larger
is this
set this than NO
DSP ACLRULE address
parameter
Indicates matching
is
whether set totois
LTE or equal
parameter
Indicates tothe the
to 0.0.0.0.
BTS3900, BTS3900 LST
ADDACLRULE
ACLRULE being
OP_RANGE,
check performed.
the destination the ACL It
configured
destination
can port
port
WCDMA, BTS3900 DSP ACLRULE port be
rule is
number.numberconsidered
applied
If this oftoeach theas NO
LTE LST ACLRULE number
the
data inverse
stream used when
ofbefore
whose the
parameter
DMPT is the
corresponding set is to set YES.to If
subnet
BTS3900, BTS3900 ADD ACLRULE destination
applying port
ACL rule.
OP_EQ,
DOP
mask. is set the to ACL rule
WCDMA, BTS3900 DSP ACLRULE number
Indicates is the
within the NO
is applied
OP_RANGE, to the this data
LTE LST ACLRULE configured
destination port
BTS3900, BTS3900 ADD ACLRULE stream whose
parameter indicates
range.OP_NEQ
number
destination used port is
when
WCDMA, BTS3900 DSP ACLRULE the
DMPT smallest
available is set
only toon YES. NO
LTE LST ACLRULE number
destination is equalport tothe the If
Indicates
LMPT,UMPT,UTRPc
DOP is
configured set the to filter
port is not
BTS3900, BTS3900 ADD ACLRULE number.
criteria forIf DOP
VLAN
and
OP_RANGE,
SMPT.
number. If this thisIDs.
WCDMA, BTS3900 DSP ACLRULE set
This toparameter
OP_RANGE, NO
LTE LST ACLRULE
parameter
Indicates
parameter
this largest
parameter is setistovalid
indicates
whether to
BTS3900, BTS3900 ADD ACLRULE only
the
check
OP_NEQ, when
the ACLID
destination
DSCP
the ACL of
indicates
ranges
port number.froma specific
4000
This to
WCDMA, BTS3900 DSP ACLRULE each
rule is data
destinationapplied stream
port to the NO
LTE LST ACLRULE 4999.
parameter
before
data When
applying
stream is this
valid
whose theonly
BTS3900, BTS3900 ADD ACLRULE number.
parameter
when
Indicates DOP theisis set
set toto
ACL rule. the
destination
Indicates port ID of a
WCDMA, BTS3900 DSP ACLRULE OP_EQ,
OP_RANGE.
Differentiated
number only
is not equal the
Services to NO
VLAN
VLAN to
ID which
specified service
LTE LST
ADDACLRULE
ACLRULE Code
the
data
Point
configured
belongs.
(DSCP). port by
When
BTS3900, BTS3900 VLANID1
number. isthis
Ifthe a valid
MOD ACLRULE Indicates
Source Port ID of a is
Operate
WCDMA, BTS3900 one. When
parameter this
is setthis to NO
DSP ACLRULE VLAN
set to to which
OP_EQ, service
LTE ADD ACLRULE parameter
OP_RANGE, is set the toACL
BTS3900, BTS3900 LST ACLRULE data belongs.
parameter specifies When
MOD ACLRULE OP_RANGE,
rule is applied all the
to the is
WCDMA, BTS3900 Source
the
VLAN ID ofPort
IDs the Operate
withinmatching the NO
DSP ACLRULE data
set to stream
OP_RANGE, whose
LTE ADD ACLRULE VLAN. When
range of VLANID1 to Source
BTS3900, BTS3900 LST ACLRULE destination
this parameter port set to
MOD ACLRULE Port
VLANID2Operate are is valid
WCDMA, BTS3900 number
specifies
OP_RANGE, is within
the this thisthe
maximum NO
DSP
ADD ACLRULE
BFDSESSION ones.
configured When
LTE ID of the matching
parameter
parameter specifies
is set to
BTS3900, BTS3900 LST
DSP ACLRULE
BFDSESSION range.OP_NEQ
Indicates the cabinet is
VLANs.
the minimum
OP_NOVLAN, This IDonly of the
WCDMA, BTS3900 MOD BFDSESSION available
No. to which
parameter
matching only
is a
VLANs. on
valid BFD the
only YES
LTE ADD
RMV BFDSESSION
BFDSESSION packets
LMPT,UMPT,UTRPc
session without
belongs. VLAN
Indicates
when Source the source Port IP
BTS3900, BTS3900 DSP BFDSESSION
LST BFDSESSION tags are
Indicates
and SMPT. valid
the ones.
subrack
address of
Operate is set to the BFD
WCDMA, BTS3900 MOD BFDSESSION No. to which
session.
OP_RANGE. The asource BFD IP YES
LTE ADD
RMV BFDSESSION
BFDSESSION session
address belongs.
BTS3900, BTS3900 DSP BFDSESSION
LST BFDSESSION Indicatesofthe
Indicates the a BFD ID ofNo.
slot a
session
BFD must
session. be
Thea
WCDMA, BTS3900 MOD BFDSESSION to which
device a BFD
IPIDaddress YES
LTE ADD
RMV BFDSESSION
BFDSESSION session
session plus 1 isof a
belongs.
BTS3900, BTS3900 DSP BFDSESSION specified
Indicates
the board
the (for
local discriminator
LST BFDSESSION example, the IP
WCDMA, BTS3900 MOD BFDSESSION destination
of the BFD
Indicates the IPindex
session. address of YES
LTE RMV BFDSESSION address
of
Thea BFD
local of an
session.
discriminatorEthernet The
ADD BFDSESSION a VRF
port instance.
or a consistent
port The
BTS3900, BTS3900 LST BFDSESSION
MOD BFDSESSION destination
must
UMTSbecurrently IPthat address
WCDMA, BTS3900 carries
must
with be
the aconfiguration
aPPPvalid link
IP or NO
DSP BFDSESSION supports
MP group) default
or a routes
logical
LTE ADD BFDSESSION address,
at the peer and side. cannot
BTS3900, BTS3900 LST BFDSESSION domain
IP address only (for(the VRF
MOD BFDSESSION be set
index isto 0.0.0.0
0). or any
WCDMA, BTS3900 example,
existing IPthe IP
addresses NO
DSP BFDSESSION
LTE ADD BFDSESSION address
in the system. of a loopback If Virtual
BTS3900, BTS3900 LST BFDSESSION
MOD BFDSESSION port),
Routerbut cannot be
Redundancy
WCDMA, BTS3900 set to the(VRRP) same value NO
DSP BFDSESSION Protocol is
LTE as the IP address of a
LST BFDSESSION used in the network,
remote maintenance
two BFD sessions
channel
must be or a
configured
negotiated
with the destination IP address. IP
Note that
addresses set a BFD to the
session
active and cannotstandby be
configured
physical IP addresses as a single-
Indicates the hop type
of the BFD session.
The single-hop BFD
session is used to
perform point-to-point
detection at the data
link layer, and often
ADD BFDSESSION
BTS3900, BTS3900 used in layer 2
MOD BFDSESSION
WCDMA, BTS3900 networking scenarios. NO
DSP BFDSESSION
LTE ADD BFDSESSION The multi-hop
Indicates the BFD
minimum
BTS3900, BTS3900 LST BFDSESSION Indicates the type of
MOD BFDSESSION session
interval is whichto
used
atsession. the
WCDMA, BTS3900 the BFD
perform end-to-end If NO
DSP BFDSESSION BFD
this session
parameter transmits
is setatto
LTE ADD BFDSESSION connectivity
Indicates thechecks
minimum
BTS3900, BTS3900 LST BFDSESSION control packets.
MOD BFDSESSION MAINTENANCE,
the transport
interval at which thelayer, this
WCDMA, BTS3900 BFD session
and often used is used
in layer NO
DSP BFDSESSION BFD session receives
LTE ADD BFDSESSION only
3 forpackets.
continuity
networking
BTS3900, BTS3900 LST BFDSESSION control
Indicates theIfdetection
MOD BFDSESSION check
scenarios.(CC). this
WCDMA, BTS3900 multiplier
parameter isaset
of BFD to NO
DSP BFDSESSION
LTE ADD BFDSESSION session.
RELIABILITY, the BFD
BTS3900, BTS3900 LST BFDSESSION
MOD BFDSESSION session
Indicatesisthe used to
WCDMA, BTS3900 NO
DSP BFDSESSION trigger
Differentiatedinterlock.
route Services
LTE
BTS3900, BTS3900 LST BFDSESSION Route
Code Pointinterlock(DSCP).
ADD BFDSESSION enables the has
standby
WCDMA, BTS3900 The priority a NO
LST BFDSESSION route to correlation
take over once
LTE positive
BTS3900, BTS3900 ADD BFDSESSION the
withactive
Indicates
the value route
the protocol
of this
WCDMA, BTS3900 MOD BFDSESSION becomes
version
parameter. of a BFDand
faulty, NO
LTE ADD CPBEARER
LST BFDSESSION therefore prevents
session.
BTS3900, BTS3900 DSP CPBEARER Indicates the number
service interruption
WCDMA, BTS3900 MOD CPBEARER of a Control
caused by routePort (CP) YES
LTE ADD
RMV CPBEARER
CPBEARER Indicates
failures. whether the
bearer.
BTS3900, BTS3900 DSP CPBEARER
LST CPBEARER transport channel
WCDMA, BTS3900 MOD CPBEARER carried
Indicates onthethetype
CP of YES
LTE RMV CPBEARER
ADD CPBEARER bearer is a
CP bearer.The UMTSmaster or
BTS3900, BTS3900 LST CPBEARER slave channel.
MOD CPBEARER currently does not
WCDMA, BTS3900 NO
DSP CPBEARER support SCTP6. The
LTE ADD CPBEARER
BTS3900, BTS3900 LST CPBEARER LTE currently
Indicates does not
the number
MOD CPBEARER support SAAL.
WCDMA, BTS3900 of a link carried on the NO
DSP
ADD CPBEARER
DEVIP
LTE CP bearer.
Indicates the cabinet
BTS3900, BTS3900 LST
DSP CPBEARER
DEVIP
number of the board
WCDMA, BTS3900 MOD DEVIP YES
ADD where the port is
LTE RMV DEVIP
DEVIP Indicates
BTS3900, BTS3900 DSP DEVIP located. the subrack
LST DEVIP number of the board
WCDMA, BTS3900 MOD DEVIP YES
ADD where the port is
LTE RMV DEVIP
DEVIP Indicates
BTS3900, BTS3900 DSP DEVIP located. the slot
LST DEVIP number of the board
WCDMA, BTS3900 MOD DEVIP YES
ADD where the port is
LTE RMV DEVIP
DEVIP Indicates
BTS3900, BTS3900 MOD DEVIP located. the type of
LST DEVIP sub-board on the
WCDMA, BTS3900 RMV DEVIP YES
ADD DEVIP board where a port is
LTE DSP DEVIP Indicates
BTS3900, BTS3900 MOD DEVIP located. the type of
LST DEVIP the physical port. The
WCDMA, BTS3900 RMV DEVIP YES
ADD DEVIP UMTS currently does
LTE DSP DEVIP
BTS3900, BTS3900 MOD DEVIP not support SUBIF.
LST DEVIP Indicates the number
WCDMA, BTS3900 RMV DEVIP Indicates YES
ADD DEVIP of a port. the index of
LTE DSP DEVIP a VRF instance. The
BTS3900, BTS3900 MOD DEVIP
LST DEVIP UMTS currently
WCDMA, BTS3900 RMV DEVIP
ADD DEVIP YES
supports default routes
LTE DSP
MODDEVIP
DEVIP
BTS3900, BTS3900 domain
Indicatesonly the(the
IP VRF
LST
RMVDEVIP
DEVIP
WCDMA, BTS3900 index is 0).
address configured for YES
DSP DEVIP
LTE the port. the subnet
Indicates
BTS3900, BTS3900 DSP
ADD MULTICASTIP
DEVIP
LST mask of the device IP
WCDMA, BTS3900 DSP DEVIP
DEVIP NO
address configured on
LTE LST
SET DEVIP
BTS3900, BTS3900 the port. whether to
Indicates
DHCPRELAYSWITCH
WCDMA, BTS3900 enable the DHCP relay NO
LST
LTE switch.
BTS3900, BTS3900 DHCPRELAYSWITCH
ADD DHCPSVRIP Indicates the IP
WCDMA, BTS3900 RMV DHCPSVRIP address of the DHCP YES
LTE LST DHCPSVRIP server.
ADD BACKE1T1
ADD E1T1
CHK E1T1CRS
ADD BACKE1T1 Indicates the cabinet
BTS3900, BTS3900 DSP E1T1
ADD number of the board
WCDMA, BTS3900 RMV E1T1
BACKE1T1 YES
CHK where an E1/T1 port is
LTE RMV E1T1CRS
E1T1 Indicates
BTS3900, BTS3900 ADD
DSP BACKE1T1
E1T1 located. the subrack
SET E1T1 number of the board
WCDMA, BTS3900 ADD
RMV E1T1
BACKE1T1
LST BACKE1T1 YES
CHK E1T1CRS where an E1/T1 port is
LTE RMV
LST E1T1
E1T1 Indicates
BTS3900, BTS3900 ADD
DSP BACKE1T1
E1T1 located. the slot
SET E1T1 number of the board
WCDMA, BTS3900 ADD
RMV E1T1
BACKE1T1
LST BACKE1T1 YES
CHK E1T1CRS where an E1/T1 port is
LTE RMV E1T1
LST E1T1
BTS3900, BTS3900 DSP E1T1 located.
SET E1T1 Indicates the number
WCDMA, BTS3900 RMV BACKE1T1
LST BACKE1T1 Indicates the port.
range of YES
ADD E1T1 of the E1/T1
LTE RMV E1T1
LST E1T1 E1/T1 ports. Note that
BTS3900, BTS3900 DSP E1T1
SET E1T1 the E1T1 MO with this
WCDMA, BTS3900 RMV E1T1
LST BACKE1T1 Indicates NO
parameterthe setworking
to
LTE SET E1T1
LST E1T1 mode of theisE1/T1
BTS3900, BTS3900 ADD E1T1 ALLPORT actually
LST E1T1 port. This parameter
WCDMA, BTS3900 SET E1T1 not created on the BS. NO
must be set to the
LTE LST E1T1
BTS3900, BTS3900 ADD E1T1 same value
Indicates theasframe
that at
WCDMA, BTS3900 SET E1T1 the peer end.
format used by the NO
LTE LST E1T1 Indicates
E1/T1 port. two mapping
BTS3900, BTS3900 ADD E1T1 methods
Indicates between
the line
WCDMA, BTS3900 SET E1T1 services
coding mode and of an NO
LTE LST E1T1 Indicates
transmission
E1/T1 port. the resource
number
BTS3900, BTS3900 ADD
ADD BACKE1T1
BACKE1T1 of the slot
groups: endhousing
point the
WCDMA, BTS3900 ADD E1T1
DSP DHCPRSLT destination
group mapping board and NO
LTE CHK E1T1CRS
LST BACKE1T1 whose
Indicates the type has
end backplane
point mapping. ofIf
BTS3900, BTS3900 DSP E1T1 an
the E1/T1
parameter port. is set to
sub-board on the
WCDMA, BTS3900 RMV BACKE1T1 ENDPOINT_GROUP, YES
board where the E1/T1
LTE RMV E1T1 all
BTS3900, BTS3900 ADD EP2RSCGRP portend points of the
is located.
SET E1T1 user plane in the end
WCDMA, BTS3900 RMV EP2RSCGRP
LST BACKE1T1 Indicates thecanendbepoint YES
point group
LTE LST
LST EP2RSCGRP
E1T1 group
BTS3900, BTS3900 ADD EP2RSCGRP added or to user plane
the specified
peer that needs
transmission to be
resource
WCDMA, BTS3900 RMV EP2RSCGRP Indicates theparameter
number YES
added
group. to the
If the specified
LTE LST EP2RSCGRP of the to
cabinet where
BTS3900, BTS3900 ADD EP2RSCGRP transmission
is set resource
ENDPOINT,
the
the transmission
group.
specified peer end
WCDMA, BTS3900 RMV EP2RSCGRP Indicates group
the number YES
resource
points of the user to
LTE LST EP2RSCGRP of the subrack whereis
BTS3900, BTS3900 ADD EP2RSCGRP which
plane a node
can maps
be added to
the transmission
configured.
WCDMA, BTS3900 RMV EP2RSCGRP the specified YES
resource
Indicates group to
the resource
number
LTE LST EP2RSCGRP transmission
BTS3900, BTS3900 ADD EP2RSCGRP which
of the slot where theis
a node maps
group.
configured.
WCDMA, BTS3900 RMV EP2RSCGRP transmission
Indicates the resource
subboard YES
LTE LST EP2RSCGRP group
type oftothe which
board a node
BTS3900, BTS3900 ADD EP2RSCGRP maps is configured.
where the transmission
WCDMA, BTS3900 RMV EP2RSCGRP YES
resource
Indicates group
the type to of
LTE LST EP2RSCGRP
BTS3900, BTS3900 ADD EP2RSCGRP which
the porta node
wheremaps the is
WCDMA, BTS3900 RMV EP2RSCGRP configured.
transmission resource YES
LTE LST EP2RSCGRP
ADD EPGROUP Indicates
group to whichthe number
a node
BTS3900, BTS3900 ADD
ADD EP2RSCGRP of
mapsthe is
port where the
configured.
WCDMA, BTS3900 RMV EP2RSCGRP
SCTPHOST2EPGRP transmission resource YES
LTE LST
ADD EP2RSCGRP Indicates
group to whichthe bearing
a node
BTS3900, BTS3900 ADD EP2RSCGRP
SCTPPEER2EPGRP type of the
maps is configured.
WCDMA, BTS3900 RMV
ADD EP2RSCGRP transmission resource YES
LTE LST EP2RSCGRP
UPHOST2EPGRP group
Indicatesto which
the IDaofnode the
BTS3900, BTS3900 ADD EP2RSCGRP maps.
ADD transmission resource
WCDMA, BTS3900 RMV EP2RSCGRP Indicates the a node YES
UPPEER2EPGRP group to which
LTE LST EP2RSCGRP description of the end
BTS3900, BTS3900 LST EPGROUP maps.
ADD
LST EP2RSCGRP point mapping to
WCDMA, BTS3900 NO
LST EP2RSCGRP
SCTPHOST2EPGRP resouce group.This
LTE Indicates
BTS3900, BTS3900 LST parameterthe ID of
takes the
effect
end point
only in LTE. group to
WCDMA, BTS3900 SCTPPEER2EPGRP YES
which an end point
LTE LST
belongs.
UPHOST2EPGRP
LST UPPEER2EPGRP
MOD EPGROUP
RMV EPGROUP
RMV
SCTPHOST2EPGRP
Indicates the index of
BTS3900, BTS3900 ADD EPGROUP
the virtual route and
WCDMA, BTS3900 MOD
ADD EPGROUP NO
forwarding(VRF)
LTE LST EPGROUP
SCTPHOST2EPGRP
BTS3900, BTS3900 instance.
RMV Indicates the ID of the
WCDMA, BTS3900 ADD YES
SCTPHOST2EPGRP SCTP host.
LTE SCTPPEER2EPGRP
BTS3900, BTS3900 LST
RMV
SCTPHOST2EPGRP Indicates the ID of the
WCDMA, BTS3900 ADD YES
SCTPPEER2EPGRP SCTP peer.
Indicates whether to
LTE UPHOST2EPGRP
BTS3900, BTS3900 LST enable thethe ACL
RMV
SCTPPEER2EPGRP Indicates ID rule of the
WCDMA, BTS3900 self-configuration YES
UPHOST2EPGRP
ADD user-plane host.
LTE function for packet
BTS3900, BTS3900 LST
UPPEER2EPGRP
UPHOST2EPGRP filtering.
IndicatesWhen the IDthis of the
WCDMA, BTS3900 RMV parameter YES
user-plane is set to
peer.
LTE UPPEER2EPGRP ENABLE, the system
BTS3900, BTS3900 ADD EPGROUP
LST UPPEER2EPGRP automatically
WCDMA, BTS3900 MOD EPGROUP NO
generates packet
LTE LST EPGROUP
BTS3900, BTS3900 ADD EPGROUP filtering
Indicates rules
the for all
WCDMA, BTS3900 MOD ETHPORT
EPGROUP links
description local
of the of an end end NO
ADD point. If this parameter
LTE LST
DSP EPGROUP
ETHPORT point group.
Indicates the maximum cabinet
BTS3900, BTS3900 is set to DISABLE, the
RMV ETHPORT IP packet
number ofsizethenot board
WCDMA, BTS3900 ADD ETHPORT system does YES
RST ETHPORT (including
where the the
EthernetIP
LTE DSP ETHPORT generate
Indicates packet
BTS3900, BTS3900 SET ETHPORT header)
port atthe
is located. thesubrack
RMV ETHPORT filtering
number ofport.rules. the For board
WCDMA, BTS3900 LST ETHPORT Ethernet the YES
ADD ETHPORT
RST ETHPORT where the
UMPT, LMPT, Ethernet and
LTE DSP ETHPORT Indicates the slot an
BTS3900, BTS3900 SET ETHPORT port is located.
UTRPc,
Indicates the value
whether of
RMV ETHPORT
LST ETHPORT number
Ethernet port isboard
this of
parameter the ranges
an
WCDMA, BTS3900 ADD ETHPORT YES
RST ETHPORT where
from 46the
Indicates
electrical Ethernet
toport
the1800.type For
or opticalof
LTE DSP ETHPORT
BTS3900, BTS3900 SET ETHPORT port
other is
sub-board located.
boards,
port. When the systemon the value
RMV ETHPORT
LST ETHPORT of this where
parameter
WCDMA, BTS3900 ADD ETHPORT board
starts, the system the YES
RST ETHPORT ranges from 46
LTE DSP ETHPORT Ethernet
binds an port
Ethernet
Indicates the speed is to port
BTS3900, BTS3900 SET ETHPORT 1500. If this parameter
RMV ETHPORT located.
to
modean optical
of the
Indicates the number port
Ethernet
WCDMA, BTS3900 LST ETHPORT is YES
RST
ADD ETHPORT
ETHPORT of set
port. to
preferentially
theThis a parameter
Ethernet value if the
port.
LTE greater
default
must than
bevalue set to the
ofthe the
BTS3900, BTS3900 SET
SET ETHPORT
ETHPORT
LST maximum
port
sameattribute
value allowed
asis that
AUTO. of
WCDMA, BTS3900 DSP ETHPORT
DHCPRSLT value, theport. maximum NO
If
thethe BS
peer does GE not
LTE DSP ETHPORT
ADD ETHPORT allowed value
BTS3900, BTS3900 LST
support cascading,
electrical portstakes of base the
SET ETHPORT
ETHPORT effect. A
port attribute
board value
supportis1000 greater
set to
WCDMA, BTS3900 Indicates the user- NO
DSP ETHPORT than
AUTO.
Mbit/s oronly
Ifequal
thiswhen to 776 is
LTE ADD ETHPORT defined information
BTS3900, BTS3900 LST ETHPORT recommended,
parameter
working in auto- is
SET ETHPORT about
because an broadcast
incorrectly Ethernet
set, port.
WCDMA, BTS3900 negotiation mode. If NO
DSP DHCPRSLT PeerPortLocation
packets,
servicesof such
of is
asoptical
LTE ADD ETHPORT SPEED aaGE base
BTS3900, BTS3900 LST ETHPORT contained
DHCP
Indicates
station packets,
willthein
betheduplex may
SET ETHPORT port is set to AUTO,
WCDMA, BTS3900 UserLabel
experience
mode of
interrupted
the port works the field.
reception
Ethernet
after atthe
1000 NO
DSP DHCPRSLT The
or format
transmission ofis reset.failures
LTE port.
base
Mbit/s station
in auto-
BTS3900, BTS3900 LST ETHPORT
ADD ETHPORT UserLabel
if the maximum ismode. If
negotiation
WCDMA, BTS3900 SET ETHPORT UserLabel="%PeerPor
transmission
SPEED
Indicatesofthe a GE unit is
optical
threshold NO
LTE ADD FLOODDEFEND
LST ETHPORT tLocation::XXXX
smaller than 776. If the
BTS3900, BTS3900 DSP FLOODDEFEND port
for is setthe
starting
Indicates tothe1000M,
type of
%ssssss",
Ethernet
Indicates
the port
protection workswhere
port
the threshold
againstis added
atto1000
WCDMA, BTS3900 MOD FLOODDEFEND the
to
for anflood
<i>XXXX</i>
theEthernet packet
excessive indicates
trunk, be
flood YES
LTE RMV FLOODDEFEND Mbit/s
excessive
measured. in manual
flood
the
this
packetvalue
parameter
Indicates
configuration
packets. alarm.of
Ifwhether
themode.IfDFDSW
theto
BTS3900, BTS3900 ADD FLOODDEFEND
LST FLOODDEFEND PeerPortLocation,
becomes
ALMSW parameter
invalid. Theand
is
enable the
parameter protection
is set to
WCDMA, BTS3900 MOD FLOODDEFEND <i>ssssss</i>
actual
set to ENABLE,
maximum indicates
the NO
against excessive
ENABLE, the system
LTE LST FLOODDEFEND the value
transmission
system of extra
measures unit the
BTS3900, BTS3900 ADD FLOODDEFEND flood
discards packets.the
WCDMA, BTS3900 MOD FLOODDEFEND UserLabel.
depends
RX rate
packets of on
when flood
the the value
RX NO
Indicates
set
packets
for the whether
everyEthernet 10 to
LTE LST FLOODDEFEND rate
report of flood
an If alarmpackets when
BTS3900, BTS3900 ADD FLOODDEFEND trunk.
seconds.
exceeds the
the threshold.
the local end
measured valuereceives
WCDMA, BTS3900 MOD FLOODDEFEND It is recommended that NO
excessive
exceeds flood
the threshold,
LTE LST FLOODDEFEND the difference between
BTS3900, BTS3900 ADD FLOODDEFEND packets
an excessive from the flood peer
Defend
end. Threshold and
WCDMA, BTS3900 MOD FLOODDEFEND packet alarm is is
Alarm Threshold NO
LTE LST FLOODDEFEND reported.
greater than The3% alarm of is
cleared if
Defend Threshold. the RX rate
of flood packets keeps
below the threshold for
five consecutive
minutes. It is
recommended that the
switchover.
that is directly This
parameter
proportionalisto validits only
when
configured the remote TX
maintenance
bandwidth; (2)channel If this
is bound tois set to
parameter
UDPSESSION/UDPSE
ENABLE and the sum
SSIONGRP
of TX bandwidths detection. of
BTS3900, BTS3900 Indicates
Currently,
the associated whether
only GSM to
SET GTRANSPARA enable
supports the the switchover
WCDMA, BTS3900 SET resource
Indicates whether togroups NO
LST GTRANSPARA of IPSec the
UDPSESSION/UDPSE Bypass. If
LTE IPSECBYPASSCFG exceeds
report ALM-25888 bandwidth
BTS3900, BTS3900 this
SSIONGRP
of the parameter
physical
SCTP Link Fault in real is
detection.
port, set to
DSP
WCDMA, BTS3900 SET DISABLE,
If the When
each
time. parameter
resource the this base
groupis setis NO
IPSECBYPASSCFG Indicates the password
LTE IPSECBYPASSCFG station
to ENABLE,
allocated
parameter cannot the
aisbandwidth
set switch
OM
tothe
BTS3900, BTS3900 LST used
DSP
IPSECBYPASSCFG
between
channel
that
ENABLE, isfor switching
an
switches
directly IPSecover
ALM-25888
WCDMA, BTS3900 base
to thestation
network
proportional andFault
active between
a non-
remote
to itsis NO
IPSECBYPASSCFG SCTP Link
LTE an
IPSec IPSec
maintenance
scheduling network.network
weight.channel and
BTS3900, BTS3900 LST reported immediately
SET GTRANSPARA a non-IPSec
after
Whenan theRATECFGTYPE network.
WCDMA, BTS3900 IPSECBYPASSCFG after SCTP link NO
LST GTRANSPARA active/standby
(the rate configuration
disconnection isremote
LTE
BTS3900, BTS3900 maintenance
type) is set
detected. When this to channel
SET GTRANSPARA is switchedisand
DUAL_RATE, the
different
WCDMA, BTS3900 parameter set to NO
LST
ADDGTRANSPARA
IKEPEER UDPSESSION/UDPSE
values of this
LTE DISABLE, a timer
BTS3900, BTS3900 DSP IKEPEER SSIONGRP
parameter
starts afterthe lead
an detects
SCTPto
Indicates
that the active
different name
CIR allocation channel of
WCDMA, BTS3900 LST IKEPEER link disconnection is YES
the
is IKE
recovered.
methods peer.
as If the (1)
follows:
LTE MOD IKEPEER
ADD IKEPEER detected. ALM-25888
BTS3900, BTS3900 RMV IKEPEER parameter
If the sum
SCTP Linkthe is
ofFaultset
CIRs to of
alarm
MOD IKEPEER Indicates ID of the
WCDMA, BTS3900 DISABLE,
the associated
is reported the
if the OM NO
DSP IKEPEER IKE proposal in use.
LTE ADD IKEPEER channel
resourcedoes
disconnection groups not
lasts for
BTS3900, BTS3900 LST IKEPEER
MOD IKEPEER switch
exceeds
Indicates
Indicates
18 consecutiveto thethe
the active
thebandwidth
type
IKE of
WCDMA, BTS3900 remote
of
the the maintenance
identification
physical NO
LTE
DSP IKEPEER protocol
seconds within port,
version. 30s.
ADD IKEPEER
LST IKEPEER channel
each
payload after
resource
Otherwise, this that the
the group localis
alarm
BTS3900, BTS3900 active/standby remote
MOD IKEPEER allocated
end transmits.
is not reported. a CIR The that is
WCDMA, BTS3900 maintenance channel NO
DSP IKEPEER directly proportional
authentication can be to
LTE ADD IKEPEER is
BTS3900, BTS3900 LST IKEPEER itsswitched
performed
configured
Indicates and
based
the CIR;
IP the on(2)IP
MOD IKEPEER UDPSESSION/UDPSE
If
or
WCDMA, BTS3900
DSP IKEPEER Indicates the pre- of
the
fully
address sum qualified
of of
the CIRs peer NO
LTE SSIONGRP
the
domain
end.associated name detects
(FQDN).
ADD IKEPEER
LST IKEPEER shared key. The two
BTS3900, BTS3900 that
resourcethe
Indicates active
groups
whether channel
is toof
MOD IKEPEER negotiation
Indicates ends
the the name must
WCDMA, BTS3900 is recovered.
smaller
enable than
the dead peer NO
DSP IKEPEER be
the configured
peer end. with the
LTE ADD IKEPEER bandwidth
detection
same authenticator. of the
(DPD)
BTS3900, BTS3900 LST IKEPEER physical port, each
MOD IKEPEER function.
This parameter
Indicates When
the DPD the
takes
WCDMA, BTS3900 resource
IPSec group
redundancy is idle NO
DSP IKEPEER effect
time. Ifonly
the when
local end
LTE ADD IKEPEER allocated
function aenabled,
non-CIR
isreceive it
BTS3900, BTS3900 LST IKEPEER Authentication
does not Method
MOD IKEPEER that
is is directly
recommended that
WCDMA, BTS3900 in the
encrypted
Indicates corresponding
packets
thetoIPits for NO
DSP IKEPEER proportional
the DPD
Indicates
IKEPROPOSAL detection
the interval
LTE a time
address defined
of the byisthis set
BTS3900, BTS3900
ADD IKEPEER
LST IKEPEER scheduling
function
at
to which
parameter, also
DPD it belocalIn
weight.
sends
MOD IKEPEER end,
this
enabled.
detection
which
case,
PRE_SHARED_KEY. theis used
Otherwise,
frames PIRare ofinaa
WCDMA, BTS3900 DPD
IKE
resource packet
negotiation.group to perform
This
is atthe NO
DSP IKEPEER an active
sent. The or standby
interval
LTE ADD IKEPEER dead
IP
sum peer
address
of the detection.
can
CIR be
and set
BTS3900, BTS3900 LST IKEPEER IKE
which peerDPD has to
detection wait
MOD IKEPEER The
the interval
Indicates
to 0.0.0.0
non-CIR. the
or for
a
Indicates
for a long whether the
WCDMA, BTS3900
DSP IKEPEER
frames
sending
authentication
configured
object can a time
are sentbefore
DPD
interface
be
may
packet
modified IP
NO
LTE ADD IKEPEER the switchover.
slightly
slightly
Indicates vary
varies in various
inlocal
BTS3900, BTS3900 LST IKEPEER algorithm
address
Indicates
or deleted atthe
thethenumber
used
by the in the
MOD IKEPEER network
various
of
IKE
end. environments
network
retransmission
proposal.
If this IKE
parameter
WCDMA, BTS3900 encryption
system.
such as The
networkalgorithm
value NO
DSP IKEPEER environments.
attempts
uses
is
usedset hashed
to after
0.0.0.0,
in the IKE
MANUAL_MODE a DPD
message the
LTE congestion, delay, and
BTS3900, BTS3900 LST IKEPEER
ADD IKEPEER detection
authentication
BS
means automatically
proposal. that fails.
The only code
Data uses
the
jitter.
(HMAC)
WCDMA, BTS3900 MOD IKEPEER the canor
userinterface
Encryption cipherIP or
Standard
modify NO
LTE LST block
deletechaining
address
(DES) is to negotiate
anobject. (CBC)
ADDIKEPEER
IKEPEER for
the
identity
The
BTS3900, BTS3900 with the
internationally
value AUTO_MODE peer. If
used
MOD IKEPEER authentication and
WCDMA, BTS3900 multiple
data
means IP addresses
encryption
that both the NO
DSP IKEPEER
ADD IKEPROPOSAL data integrity check.
LTE are configured
algorithm,
system andwhich the atuserthe
uses
BTS3900, BTS3900 LST
DSP IKEPEER
IKEPROPOSAL For details about
port,
a
can56-bitit
modifyiskey.
Indicates the ID of the or Thedelete
WCDMA, BTS3900 LST IKEPROPOSAL HMAC,
recommended
3DES
the object. issee alsoRFC4306. anthat you YES
IKE proposal.
LTE MOD IKEPROPOSAL
ADD IKEPROPOSAL HMAC
specify
internationallycurrently
one IP usedaddress
BTS3900, BTS3900 RMV IKEPROPOSAL supports
for the two
negotiation. hash If
MOD IKEPROPOSAL encryption algorithm,
WCDMA, BTS3900 functions:
the local BS message NO
DSP IKEPROPOSAL which uses auses168-bit the
LTE ADD IKEPROPOSAL digest
digital algorithm
certificate 5and
BTS3900, BTS3900 LST IKEPROPOSAL key. The Advanced
MOD IKEPROPOSAL (MD5)
IP address
Encryption and secure for
Standard
WCDMA, BTS3900 NO
DSP IKEPROPOSAL hash
(AES)algorithm
authentication
Indicates is an theadvanced in1 the
LTE ADD IKEPROPOSAL
BTS3900, BTS3900 LST IKEPROPOSAL (SHA1).
negotiation, For
encryption algorithm,
authentication details
ensure mode
MOD IKEPROPOSAL about
WCDMA, BTS3900 that
usedthe
which inthe IPhash
provides
the address
IKE threein NO
DSP IKEPROPOSAL functions,
the certificate
types of key see is the
ofdetails,
LTE proposal. For
LST IKEPROPOSAL RFC2409.
same
different as lengths:
the MD5 local and IP
128,
see RFC2409.
SHA1
192, and 256 bits.by
address verifyof the data BS.
means
Thus, differentof integrity
protection.
protection levels SHA1are
provides
available.higher For details,
security
see RFC2401. level than
MD5. CBC currently
Hellman (DH) group of
the IKE proposal. The
core technology used
in an IKE proposal is
the Diffie-Hellman
Indicates
(DH) exchange the Pseudo-
ADD IKEPROPOSAL random
technology. Function The DH
BTS3900, BTS3900
MOD IKEPROPOSAL (PRF)
exchange algorithmtechnology used
WCDMA, BTS3900 in IKEv2. The PRF NO
DSP IKEPROPOSAL is used to calculate
LTE ADD IKEPROPOSAL algorithm is used to
BTS3900, BTS3900 LST IKEPROPOSAL private information
MOD IKEPROPOSAL generate
based on the public materials
WCDMA, BTS3900 NO
DSP IKEPROPOSAL required
information. for IKE It is
LTE Indicates the mapping
BTS3900, BTS3900 LST
ADDIKEPROPOSAL
IP2RSCGRP authentication
mathematically and
proven
between
encryption. IP
that decrypting the and
For details DH
WCDMA, BTS3900 RMV IP2RSCGRP YES
Transport
about
Indicates how
information is Resource
the to generate
number
LTE LST IP2RSCGRP
BTS3900, BTS3900 Groups.
materials,
of the cabinet
impractical seeduehousing
to
ADD IP2RSCGRP RFC4306.
WCDMA, BTS3900 the board
calculation
Indicates the numberwhere
complexity. a NO
LST IP2RSCGRP
LTE transmission
of the subrack that resource
BTS3900, BTS3900 group isthe established.
ADD IP2RSCGRP houses board
WCDMA, BTS3900 Indicates the number NO
LST IP2RSCGRP where a transmission
LTE of the slotgroup is
BTS3900, BTS3900 resource
ADD IP2RSCGRP corresponding
established. to the
WCDMA, BTS3900 NO
LST IP2RSCGRP board where a
LTE
BTS3900, BTS3900 transmission
Indicates the resource bearer
ADD IP2RSCGRP group
WCDMA, BTS3900 type ofistransmission
established. NO
LST IP2RSCGRP Indicates the type of
LTE resource group.
BTS3900, BTS3900 sub-board on the
ADD IP2RSCGRP
WCDMA, BTS3900 board where a NO
LST IP2RSCGRP
LTE transmission
Indicates the resource type of
BTS3900, BTS3900 group is established.
ADD IP2RSCGRP port where a
WCDMA, BTS3900 NO
LST IP2RSCGRP transmission resource
LTE Indicates the number
BTS3900, BTS3900 group is carried.
ADD IP2RSCGRP of the port where the
WCDMA, BTS3900 NO
LST IP2RSCGRP transmission resource
LTE
BTS3900, BTS3900 group
Indicates is configured.
the ID of a
ADD IP2RSCGRP
WCDMA, BTS3900 transmission
Indicates the resource index of NO
LST IP2RSCGRP
LTE group.
a VRF instance. The
BTS3900, BTS3900
ADD IP2RSCGRP UMTS currently
WCDMA, BTS3900 Indicates the NO
LST IP2RSCGRP supports
Indicates default the ARP routes
LTE destination IP address
BTS3900, BTS3900 domain
spoofing alarm VRF
only (the
ADD IP2RSCGRP of the is
index
Indicates service
0).the flowthe
subnet that
WCDMA, BTS3900 threshold. When NO
LST IP2RSCGRP is bound
Indicates
maskspoofing
of the to a
whether to
LTE ARP check
BTS3900, BTS3900 transmission
perform
destination
switch is ARP
turned IPresource
spoofing
address
on, an
ADD IP2RSCGRP group.
Indicates
checks. If whether
this traffic to is
WCDMA, BTS3900 of thespoofing
ARP service alarm NO
LST IP2RSCGRP report
parameter an alarm
is set when
to
LTE bound
reported
Indicates to ifawhether
the number tois
BTS3900, BTS3900 the
ENABLE,number
transmission
of ARP APR updatean of invalid
alarm
resource
SET IPGUARD enable
packets received learning by
WCDMA, BTS3900
LST IPGUARD
reported
group.
attempts
strict. ARP
when
reaches
learning
ARP thisa NO
LTE BS exceeds
spoofing
threshold attacks the
within one occur.
BTS3900, BTS3900 strict
thisisparameter
specified
If a function
threshold. that
isthe If
set
SET IPGUARD Indicates
minute.
enables Note
a the
BS threshold
that
to learn
WCDMA, BTS3900 this
to
for parameter
DISABLE,
the excessive no is set
alarm
flood to NO
LST IPGUARD number
the of ARP update
acknowledgement
LTE ENABLE,
is reported
packet alarm. an when alarm
When ARP is
BTS3900, BTS3900 attemptsinfrom
packets response trustedto
SET IPGUARD reported
spoofing
Invalid
MAC when
attacks
Packet
addresses the
Checkoccur.
is not
WCDMA, BTS3900 only
number ARP of request
invalid NO
LST IPGUARD Switch
counted. is set
This toalarm is
LTE packets
packets sent
received by itself.
by a
BTS3900, BTS3900 ENABLE,
cleared
With if nothe
ARP learning system
request
SET IPGUARD BS
for exceeds
measures
updating the
thethe RXMAC rate
WCDMA, BTS3900 strict, the threshold.
BS can NO
LST IPGUARD specified
of invalid
address packets
mapping to If
LTE reject most ARP
BTS3900, BTS3900 this
every
the parameter
IP 10 seconds.
address is set If to
SET IPGUARD request
DISABLE, and no alarm is
WCDMA, BTS3900 the measured
indicated
acknowledge by the value
alarm
packet NO
LST IPGUARD reported when the
LTE exceeds
is received
attacks. this threshold,
within one
BTS3900, BTS3900 number
Indicates
an
or excessive
two ofwhether
minutes. invalidinvalid to
SET IPGUARD packets received by a
WCDMA, BTS3900 report
packet IPSec
alarm packet
is NO
LST IPGUARD BS exceeds
LTE replay
reported. alarm.Thethe alarm is
BTS3900, BTS3900 Indicates
cleared if the IPSec
specified the
threshold.RX rate
SET IPGUARD
WCDMA, BTS3900 anti-replay
Invalid
of invalid packets alarm
packets are NO
LST
ADDIPGUARD
IPPATH
LTE threshold.
those filtered
keeps below the
BTS3900, BTS3900 DSP IPPATH accordingthe to the
Indicates
threshold for 5ID of an
WCDMA, BTS3900 LST IPPATH packet YES
IP path.filter criteria.
consecutive minutes.
LTE MOD IPPATH
RMV IPPATH
Indicates the cabinet
BTS3900, BTS3900 ADD IPPATH
number of the board
WCDMA, BTS3900 MOD IPPATH NO
where the IP path is
LTE LST IPPATH Indicates
BTS3900, BTS3900 ADD IPPATH located. the subrack
number of the board
WCDMA, BTS3900 MOD IPPATH NO
where the IP path is
LTE LST IPPATH Indicates
BTS3900, BTS3900 ADD IPPATH located. the slot
number of the board
WCDMA, BTS3900 MOD IPPATH NO
where the IP path is
LTE LST IPPATH Indicates
BTS3900, BTS3900 ADD IPPATH Indicates the
located. the type
physical of
WCDMA, BTS3900 MOD IPPATH the IP path.
port type of the IP FIXED NO
LTE LST IPPATH indicates
path. that this IP
BTS3900, BTS3900 ADD IPPATH path is used
Indicates theto carry
number
WCDMA, BTS3900 MOD IPPATH the service
of the port where the with NO
LTE LST IPPATH specified
IP path is Quality configured. of
BTS3900, BTS3900 ADD IPPATH Service (QoS), that is,
WCDMA, BTS3900 MOD IPPATH with a specified DSCP. NO
LTE LST IPPATH Indicates
ANY indicates the that this
BTS3900, BTS3900 ADD IPPATH differentiated
IP Path can be services
used to
WCDMA, BTS3900 MOD IPPATH Indicates
code
carry point
Indicatesservices the type
(DSCP)
the of any
local ofof
IP NO
LTE LST IPPATH transport
the services
QoS andofhence
address resource
carried
an IPispath. for
on
BTS3900, BTS3900 ADD IPPATH the
an IP
IP
usedvalue path.
path.
to carry Thethe value
The 0.0.0.0
WCDMA, BTS3900 MOD IPPATH HQ indicates NO
service
indicates that high-
without thea local
LTE LST IPPATH quality
specified transport
DSCP.
BTS3900, BTS3900 ADD IPPATH IP address needs to
resources,
Indicates
be negotiated. theand peer theIP
WCDMA, BTS3900 MOD IPPATH value LQ indicates NO
address of the IP path.
LTE LST
ADDIPPATH
IPPATH low-quality transport
BTS3900, BTS3900
MOD IPPATH resources. This
WCDMA, BTS3900 NO
DSP IPPATH parameter must be set
LTE Indicates the ID of the
BTS3900, BTS3900 LST
ADDIPPATH
IPPATH in the
transmission
hybridtransmission resource
WCDMA, BTS3900 MOD IPPATH NO
group
scenario. established
In other on
LTE LST IPPATH
BTS3900, BTS3900 ADD IPPATH an IP path.
scenarios,
Indicates the default
the
WCDMA, BTS3900 MOD IPPATH value of thisabout
description parameter the NO
LTE LST IPPATH is used.The
peer of the
Indicates the type of IPparameter
path.
BTS3900, BTS3900 ADD IPPATH takes effectononly
sub-board thein
WCDMA, BTS3900 MOD IPPATH LTE.
Indicates the theindex NO
board where IP of
LTE LST IPPATH Indicates
a VRF whetherThe the
BTS3900, BTS3900 ADD IPPATH path is instance.
established.
IP
UMTSpathcurrently
joins a
WCDMA, BTS3900 MOD IPPATH transmission resource NO
supports default routes
LTE LST IPPATH group.
BTS3900, BTS3900 ADD IPPATH domainIfonly this (the VRF
parameter
index is 0).is set to
WCDMA, BTS3900 MOD IPPATH NO
DISABLE, the IP path
LTE LST
ADDIPPATH
IPPMSESSION
BTS3900, BTS3900 is established
Indicates
Indicates the
the local
ID onofthe IP
an
DSP IPPMSESSION default
address transmission
of an IP PM
WCDMA, BTS3900 IP PM session
Indicates the peer IP of an YES
RMV IPPMSESSION resource
session. group
This onPM a
LTE
LST IPPMSESSION
NE.
address of theIPIP
BTS3900, BTS3900 ADD IPPMSESSION specific physical
address excluding port.
session.
IndicatesThis that IP the
WCDMA, BTS3900 DSP IPPMSESSION 0.0.0.0
address must
must
activation direction be be a of NO
LTE LST IPPMSESSION configured
validIPIPPM
the address at theof For
session.
BTS3900, BTS3900 ADD IPPMSESSION Ethernet port,
Class
this A, B,
parameter
Indicates or Ethernet
whether Ctoand
beto
WCDMA, BTS3900 DSP IPPMSESSION trunk, or loopback NO
different
valid,
bind theIP
the frompeer
PM any
must
session
LTE LST IPPMSESSION interface.
Indicates the
BTS3900, BTS3900 ADD IPPMSESSION existing
also
to IP IP
ansupport path. address
the IP PM
If the of
IP
Differentiated
the local
session. end.
If
PM session is bound this Services
In
WCDMA, BTS3900 DSP IPPMSESSION NO
Code
addition,
parameter
to an IP Point itthe
path, is(DSCP)
cannot
set
thetoIP be of
UP,
LTE LST IPPMSESSION Indicates type of IP
an
set IP PM session.
BTS3900, BTS3900 ADD IPPMSESSION PM to
the
PM IP 0.x.x.x
PM session
session
session. Aortriplet
uses the
WCDMA, BTS3900 DSP IPPMSESSION 127.x.x.x.
initiated
local
consists andby ofpeer the IP
the BS isIP
local NO
LTE LST IPPMSESSION activated.
addresses
address, peer IP IP If
ofthisthe
BTS3900, BTS3900 ADD IPPMSESSION parameter
path in data is set to
address, and protocol
WCDMA, BTS3900 DSP IPPMSESSION BIDIR, NO
type; a the
transmission.
quadbit IP PM In
LTE LST IPPMSESSION sessions
addition, ifinitiated
TXBWASW by IP
BTS3900, BTS3900 ADD IPPMSESSION consists of the local
BS
or and
RXBWASW the
address, peer IP peer is are
set to
WCDMA, BTS3900 DSP IPPMSESSION activated.The NO
ON and TCSW
address, protocol type, is set
LTE LST IPPMSESSION activation
to
and DSCP.direction
ENABLE in the is
specified
algorithm forthe by theDIR
parameter. resource
transmission
group associated with
the IP path, the system
dynamically adjusts
the TX or RX
BTS3900, BTS3900 ADD IPPMSESSION Indicates the ID of the
WCDMA, BTS3900 DSP IPPMSESSION IP path to which an IP NO
LTE LST
ADDIPPMSESSION
IPRT PM session is bound.
BTS3900, BTS3900
MOD IPRT Indicates the index of
WCDMA, BTS3900 YES
RMV IPRT an IP route.
LTE ADD IPRT Indicates the cabinet
BTS3900, BTS3900 LST IPRT
DSP IPRT number of the board
WCDMA, BTS3900 NO
MOD IPRT where the IP route is
LTE ADD IPRT Indicates
BTS3900, BTS3900 LST IPRT located. the subrack
DSP IPRT number of the board
WCDMA, BTS3900 NO
MOD IPRT where the IP route is
LTE ADD IPRT Indicates
BTS3900, BTS3900 LST IPRT located. the slot
DSP IPRT number of the board
WCDMA, BTS3900 NO
MOD IPRT where the IP route is
LTE Indicates
BTS3900, BTS3900 LST
ADDIPRT
IPRT located. the type of
sub-board on the
WCDMA, BTS3900 MOD IPRT NO
board where the IP
LTE LST IPRT Indicates the type of
BTS3900, BTS3900 ADD IPRT route is established.
Indicates
route. If this theparameter
type of
WCDMA, BTS3900 MOD IPRT NO
port.
is set to NEXTHOP, all
LTE LST IPRT
BTS3900, BTS3900 ADD IPRT the IP packets that
Indicates
meet the route the port
WCDMA, BTS3900 MOD IPRT NO
number.
direction are first
LTE LST
ADDIPRT
IPRT
BTS3900, BTS3900 forwarded to the
MOD IPRT
WCDMA, BTS3900 specified
Indicates next hop IP
the index of NO
DSP IPRT
LTE ADD IPRT address. If this
a VRF instance. The
BTS3900, BTS3900 LST IPRT
MOD IPRT parameter
UMTS currently is set to IF,
WCDMA, BTS3900 all the IP packets that NO
DSP IPRT supports default routes
LTE ADD IPRT meet theonly route
BTS3900, BTS3900 LST IPRT domain
Indicates (VRF
the first
MOD IPRT direction
index are
is 0).
WCDMA, BTS3900 destination
forwarded toIPthe address NO
DSP IPRT
LTE ADD IPRT of the route.
Indicates egress
specified the subnetport.
BTS3900, BTS3900 LST IPRT
MOD IPRT mask for the
WCDMA, BTS3900 NO
DSP IPRT destination IP address
LTE ADD IPRT
BTS3900, BTS3900 LST IPRT of the route.
Indicates the IP
MOD IPRT
WCDMA, BTS3900 address of the next NO
DSP IPRT Indicates the priority of
LTE ADD IPRT hop.
BTS3900, BTS3900 LST IPRT the routing table entry.
MOD IPRT
WCDMA, BTS3900 A smaller parameter NO
DSP IPRT
LTE value
Indicatesindicates
the a
BTS3900, BTS3900 LST
ADDIPRT
IPRT higher priority.
description about the
WCDMA, BTS3900 MOD IPRT NO
destination of the
LTE LST
ADDIPRT
IPSECBIND Indicates the cabinet
BTS3900, BTS3900 route.
MOD IPSECBIND number of the port to
WCDMA, BTS3900 YES
RMV IPSECBIND which the IPSec policy
LTE ADD IPSECBIND Indicates the subrack
BTS3900, BTS3900 LST IPSECBIND group is bound.
MOD IPSECBIND number of the port to
WCDMA, BTS3900 YES
RMV IPSECBIND which the IPSec policy
LTE ADD IPSECBIND Indicates the slot
BTS3900, BTS3900 LST IPSECBIND group is bound.
MOD IPSECBIND number of the port to
WCDMA, BTS3900 YES
RMV IPSECBIND which the the
Indicates IPSectypepolicy
of
LTE ADD IPSECBIND
BTS3900, BTS3900 LST IPSECBIND group
sub-board is bound.
on the
MOD IPSECBIND
WCDMA, BTS3900 board with the port to YES
RMV IPSECBIND
LTE ADD IPSECBIND which
Indicates the the
IPSectypepolicy
of
BTS3900, BTS3900 LST IPSECBIND
MOD IPSECBIND group is bound.
port to which the
WCDMA, BTS3900 YES
RMV IPSECBIND IPSec policy group is
LTE ADD IPSECBIND Indicates
BTS3900, BTS3900 LST IPSECBIND bound. the number
MOD IPSECBIND of the port to which the
WCDMA, BTS3900 YES
RMV IPSECBIND IPSec policy group is
LTE
BTS3900, BTS3900 LST IPSECBIND bound.
Indicates the name of
ADD IPSECBIND
WCDMA, BTS3900 the IPSec policy NO
LST IPSECBIND
LTE group.
ADD IPSECPOLICY
BTS3900, BTS3900 DSP IPSECPOLICY Indicates
Indicates the the AH name of
WCDMA, BTS3900 LST IPSECPOLICY authentication
the IPSec policy YES
Indicates
algorithm the
used by an
LTE ADD
MOD IPSECPOLICY
IPSECPOLICY group.
sequence
IPSec proposal. No. of IPSec the
BTS3900, BTS3900 DSP
RMV IPSECPOLICY
IPSECPOLICY IPSec policy
can use hashed group.
WCDMA, BTS3900 LST IPSECPOLICY YES
The smaller the
message
LTE MOD IPSECPOLICY
ADD IPSECPOLICY
BTS3900, BTS3900 number,
authenticationthe higher the
RMV IPSECPOLICY
MOD IPSECPOLICY Indicates
priority. the IDcode of the
WCDMA, BTS3900 (HMAC) or cipher NO
DSP IPSECPOLICY access control list.
LTE ADD IPSECPOLICY block chaining-
BTS3900, BTS3900 LST IPSECPOLICY
MOD IPSECPOLICY message
Indicates the
WCDMA, BTS3900 Indicates
authentication the namesecurity
code
of
NO
DSP IPSECPOLICY the IPSec
protocol proposal.
LTE ADD
ADD IPSECPOLICY
LST IPSECPOLICY Indicatesused
(CBC-MAC) thefor inidentity
name an of
BTS3900, BTS3900 IPSec
IPSECPROPOSAL
MOD IPSECPOLICY the IKEproposal.
authentication
peer that andThe
is
WCDMA, BTS3900 value AH indicates NO
DSP
DSP IPSECPOLICY data integrity
referenced the the
bycheck.
LTE IPSECPROPOSAL Authentication
For details about Header
BTS3900, BTS3900 LST IPSECPOLICY IPSec policy.
ADD
LST Indicates
(AH) protocol
Indicates the
the
HMAC, see RFC4306. specified
name of
WCDMA, BTS3900 IPSECPROPOSAL encryption
in algorithm YES
IPSECPROPOSAL theRFC2402.
HMAC IPSec The
proposal.
currently
LTE MOD used
value in
ESPESP. The
indicates Data
BTS3900, BTS3900 MOD supports three hash
ADD
IPSECPROPOSAL
IPSECPROPOSAL Encryption
the Encapsulating Standard
WCDMA, BTS3900 functions: message NO
IPSECPROPOSAL
DSP
RMV (DES)
Security is Payload
an
LTE digest
Indicates algorithm
the ESP 5
MOD internationally
BTS3900, BTS3900 IPSECPROPOSAL
IPSECPROPOSAL
ADD (MD5), secure used
(ESP) protocol
authentication hash
IPSECPROPOSAL
LST data encryption
specified in RFC2406.
WCDMA, BTS3900 IPSECPROPOSAL algorithm
algorithm 1
used(SHA1), byuses
an NO
DSP
IPSECPROPOSAL algorithm,
The value which
AH_ESP
LTE MOD and
IPSec secure
proposal. hash If this
BTS3900, BTS3900 IPSECPROPOSAL a 56-bit key.
indicates that The
the ESP
ADD
IPSECPROPOSAL algorithm
parameter 256
is set to
WCDMA, BTS3900 LST 3DES
protocol is isalso anthree NO
IPSECPROPOSAL
DSP (SHA256).
NULL, The
the following
LTE IPSECPROPOSAL internationally
preferentially used
used to
MOD
IPSECPROPOSAL hash functions
algorithms are not verify
BTS3900, BTS3900 encryption
protect
data by meansalgorithm,
packets, ofbut
IPSECPROPOSAL
LST used:
WCDMA, BTS3900
DSP
which
not theMD5,
integrityuses
AH aSHA1,
168-bit
protocol.
protection. NO
LTE IPSECPROPOSAL SHA256,
key. The and
Advanced AES-
IPSECPROPOSAL Indicates
Among
XCBC-MAC-96. the cabinet
them, SHA256
BTS3900, BTS3900 Encryption Standard
SET
LST LR number
providesofthe the board
highest
WCDMA, BTS3900 (AES) YES
LTE
LST LR
IPSECPROPOSAL security leveladvanced
where is
the an port andis MD5
encryption
Indicates
located.
provides the algorithm,
the subrack
lowest
BTS3900, BTS3900 which can use three
SET LR number
security of the For
level. board
WCDMA, BTS3900 types of keys of YES
LST LR where the
details about theport is hash
LTE Indicates
different the
lengths: slot 128,
BTS3900, BTS3900 located.
functions, see
SET LR number
192, and of256the board
bits.
WCDMA, BTS3900 RFC2409. CBC-MAC YES
LST LR where
Therefore,thesupports
port
differentis
LTE currently
BTS3900, BTS3900 located.
protection
AES-XCBC-MAC-96, levels are
SET LR available.
Indicates For
the port details,
UL type.
WCDMA, BTS3900 which is an YES
LST LR see RFC2401.
committed information
LTE enhancement to CBC-
BTS3900, BTS3900 rate
MAC.afterForthe rate
details limitation
about
SET LR Indicates port
WCDMA, BTS3900 is configured at a port.
AES-XCBC-MAC-96, YES
LST LR number.
LTE The precision of the
see RFC3566.
BTS3900, BTS3900 Indicates
UL committed the switch for
SET LR
WCDMA, BTS3900 limiting
information the lineraterate at NO
LST LR
LTE the port.
supported by the
BTS3900, BTS3900
SET LR UMPTb
Indicatesisthe 64 Kbit/s,
WCDMA, BTS3900 NO
LST LR the precision
Committed Burst Size
LTE
BTS3900, BTS3900 supported
(CBS) afterby ratethe other
SET LR board is 32 Kbit/s. If
WCDMA, BTS3900 limitation is configured NO
LST LR the configured UL
LTE at a port.The
Indicates the minimum
Excess
BTS3900, BTS3900 committed
rate supported information
byafter
the
SET LR Burst
rate isSize
not a(EBS)
multiple of
WCDMA, BTS3900 UMPTb is 64 Kbit/s. NO
LST LR rate
the limitation
Indicates
precision, the DL is
the UL
LTE Indicates the
BTS3900, BTS3900 configured
committed
committed at type
a port.
information
information
of
SET LR sub-board
rate after on
rate the
limitation
WCDMA, BTS3900 rate is where
rounded up. is YES
LST LR board
is configured aatport
a
LTE
BTS3900, BTS3900 located.
port.This parameter
SET LR
WCDMA, BTS3900 ADD MPGRP computes the value of NO
LST LR
LTE DSP MPGRP Physical Port
Indicates Down
the number
BTS3900, BTS3900 Link
MOD MPGRP of theAdmission.The
cabinet where
WCDMA, BTS3900 minimum rate YES
RMV MPGRP the MLPPP group is
LTE supported
RST MPGRP located. by the
LST MPGRP UMPTb is 64 Kbit/s.
ADD MPGRP
DSP MPGRP Indicates the number
BTS3900, BTS3900
MOD MPGRP of the subrack where
WCDMA, BTS3900 ADD YES
RMV MPGRP
MPGRP the MLPPP group is
LTE DSP MPGRP Indicates
BTS3900, BTS3900 RST MPGRP located. the number
MOD
LST MPGRP
ADDMPGRP
MPGRP of the slot where the
WCDMA, BTS3900 Indicates whether YES
RMV MPGRP
DSP MPGRP MLPPP group is an
LTE MLPPP
BTS3900, BTS3900 RST
MODMPGRP
MPGRP located. group
LST supports
Indicates the the multi-
number
WCDMA, BTS3900 RMVMPGRP
MPGRP class YES
of the feature.
MLPPP group.
LTE RST
ADD MPGRP
MPGRP If this parameter is set
BTS3900, BTS3900 DSP
MODDHCPRSLT
MPGRP to ENABLE, the
WCDMA, BTS3900 LST NO
DSP MPGRP
MPGRP MLPPP group
LTE Indicates the Class of
BTS3900, BTS3900 LST
ADDMPGRP
MPGRP supports the
authentication
Indicates
Service (CoS) the localuserIP
feature
WCDMA, BTS3900 MOD MPGRP NO
name
address.of
and four or an MLPPP
If this
eight
LTE LST MPGRP
BTS3900, BTS3900 ADD MPGRP group.
parameter
service types
Indicates is set
the of to
WCDMA, BTS3900 MOD MPGRP 0.0.0.0,
authentication address
different this IP
priorities. NO
LTE LST needs to be
ADDMPGRP
MPGRP password.
BTS3900, BTS3900 negotiated. If this
MOD MPGRP
WCDMA, BTS3900 parameterthe
Indicates is not
subnetset to NO
DSP MPGRP Indicates the peer
LTE ADD MPGRP 0.0.0.0,
mask of itthe
must localbeIPIP
set
BTS3900, BTS3900 LST MPGRP address. When the BS
MOD MPGRP to a valid
address. IP address
If this of
WCDMA, BTS3900 is connected
class A, B, or toC abut
peer NO
DSP MPGRP parameter
equipment, isthe
set to IP
LTE ADD MPGRP
LST MPGRP must notitbe
0.0.0.0, needsthepeer to be
BTS3900, BTS3900 address can
reserved address be either
MOD MPGRP negotiated.
WCDMA, BTS3900 user-specified
0.x.x.x or 127.x.x.x. or set to NO
DSP MPGRP
LTE 0.0.0.0. If this
BTS3900, BTS3900 LST MPGRP
ADD MPGRP Indicates
parameterthe MP/MC
is set to
WCDMA, BTS3900 MOD MPGRP head
0.0.0.0, this IP the
option of address NO
LTE LST MPGRP MLPPP.
is obtained by means
BTS3900, BTS3900 ADD MPGRP of negotiation.
Indicates the number
WCDMA, BTS3900 MOD MPGRP NO
of classes of service.
LTE LST
ADDMPGRP
MPGRP
BTS3900, BTS3900 Indicates whether to
MOD MPGRP
WCDMA, BTS3900 enable IP header NO
DSP MPGRP
LTE compression.
BTS3900, BTS3900 LST
ADDMPGRP
MPGRP Indicates whether to
WCDMA, BTS3900 MOD MPGRP
ADD MPGRP enable IPHC NO
LTE LST MPGRP Indicates
suboptionthe type of
negotiation.
DSP MPGRP
BTS3900, BTS3900 sub-board on the
MOD MPGRP
WCDMA, BTS3900 board where an YES
RMV MPGRP
ADD MPLNK
LTE MLPPP
Indicatesgroup is
the number
BTS3900, BTS3900 RST MPGRP
DSP MPLNK established.
of the cabinet where
WCDMA, BTS3900 LST
RMVMPGRP
MPLNK YES
ADD MPLNK the MLPPP link is
LTE RST MPLNK Indicates
BTS3900, BTS3900 DSP MPLNK located. the number
LST MPLNK of the subrack where
WCDMA, BTS3900 RMV MPLNK YES
ADD MPLNK the MLPPP link is
LTE RST MPLNK
BTS3900, BTS3900 DSP MPLNK located. the number
Indicates
LST MPLNK
WCDMA, BTS3900 RMV MPLNK
ADD MPLNK of the slot where the YES
LTE RST MPLNK
DSP MPLNK MLPPP link is located.
BTS3900, BTS3900 LST
RMVMPLNK
MPLNK Indicates the number
WCDMA, BTS3900 YES
RST MPLNK of the MLPPP link.
LTE
BTS3900, BTS3900 DSP
ADD DHCPRSLT
MPLNK
LST Indicates the number
WCDMA, BTS3900 DSP MPLNK
MPLNK NO
of the MLPPP
Indicates group.
the number
LTE LST MPLNK
BTS3900, BTS3900 of the subrack housing
ADD MPLNK
WCDMA, BTS3900 the board where the NO
LST MPLNK Indicates
LTE E1/T1 portthe number
carrying the
BTS3900, BTS3900 of slot holding the
MLPPP link is located.
ADD MPLNK
WCDMA, BTS3900 board where the E1/T1 NO
LST MPLNK
LTE port carrying
Indicates the the
number
BTS3900, BTS3900 MLPPP link isport
located.
ADD MPLNK of the E1/T1
WCDMA, BTS3900 NO
LST MPLNK carrying the MLPPP
LTE
link.
Indicates the number
BTS3900, BTS3900
ADD MPLNK of the E1/T1 slot
WCDMA, BTS3900 NO
LST
ADDMPLNK
MPLNK carrying the MLPPP
LTE Indicates the type of
BTS3900, BTS3900 DSP MPLNK link.
sub-board where an
WCDMA, BTS3900 RMV MPLNK YES
MLPPP link is
LTE RST MPLNK Indicates the type of
BTS3900, BTS3900 established.
LST
ADDMPLNK
MPLNK sub-board where an
WCDMA, BTS3900 NO
LST MPLNK MLPPP
Indicatesgroup the type is of
LTE
BTS3900, BTS3900 established.
sub-board on the
ADD MPLNK
WCDMA, BTS3900 board where the E1/T1 NO
LST
ADDMPLNK
OMCH
LTE port carrying
Indicates the the
BTS3900, BTS3900 DSP OMCH MLPPP link isflag located.
master/slave
Indicates whetherof a
WCDMA, BTS3900 MOD OMCH YES
the remote
route is bound to the
LTE RMV OMCH
ADD OMCH
BTS3900, BTS3900 maintenance
Indicates
remote the local
maintenance channel. IP
LST
MODOMCH
OMCH
WCDMA, BTS3900 address of
channel. If the a remotepeer IP NO
DSP OMCH
LTE ADD OMCH maintenance
of the remote
Indicates the local channel.
BTS3900, BTS3900 LST OMCH
MOD OMCH maintenance
subnet mask of channel
a
WCDMA, BTS3900 and device IP NO
DSP OMCH remote maintenance
the
LTE ADD OMCH
LST OMCH
Indicates
addresses
channel. arepeer
whether not aIPin
BTS3900, BTS3900 address
standby
the same of
route the
network remoteto
needs
MOD OMCH Indicates the type of
WCDMA, BTS3900 maintenance
be boundand
segment to the channel,
the NO
DSP OMCH detection mechanism
LTE ADD OMCH that
remote is,
Indicates
network the IP
maintenance
the remote address
subnet
BTS3900, BTS3900 LST OMCH bound
of the
channel. tosegment
Ifthe
U2000. the remote
of
MOD OMCH mask
the of
device
maintenance the IP peer
address
channel.IP
WCDMA, BTS3900 HA system NO
DSP OMCH address
cannot
If this for is
cover
parameter the applied
that remote
isofset
LTE ADD OMCH to the U2000 and no
BTS3900, BTS3900 LST OMCH maintenance
the peer
Indicates
to NONE, IPthe
no channel.
address,
bearer
detection
MOD OMCH destination
run the IPIPRTaddress
WCDMA, BTS3900 type of aADD
mechanism
network remote
segment is bound NO
LTE
DSP OMCH command
maintenance
to the remote to add
channel.afor
ADD OMCH
LST OMCH the route covers the
BTS3900, BTS3900 route to the remote
maintenance channel
MOD OMCH U2000 destination IP
WCDMA, BTS3900 maintenance
and an active/standby channel. NO
DSP OMCH address network
LTE ADD OMCH If this parameter
remote
Indicates maintenance
the index is set
of
BTS3900, BTS3900 LST OMCH segment, run theisADD
MOD OMCH to YES,
channel
the active a route
switchover
route bound is
WCDMA, BTS3900 IPRT
bound command
to the remoteto add NO
DSP OMCH triggered
to
a the remoteby
route to the channel, switchover
U2000.
LTE ADD OMCH maintenance
message sentchannel.byisthe
BTS3900, BTS3900 LST OMCH maintenance
If this parameter set
MOD OMCH and
U2000. the Ifroutethis takes
WCDMA, BTS3900 to YES,
effect a
only is standby
when the NO
DSP OMCH parameter set
LTE ADD OMCH route
Indicates
remote is maintenance
bound
the index totothe of
BTS3900, BTS3900 LST OMCH UDPSESSION, the
MOD OMCH remote
the
takes standbymaintenance
effect. route
If this
WCDMA, BTS3900 UDP
channel,pingand detection
the to routeis NO
DSP OMCH bound
parameter
bound to
to the
the is setremote
remote
LTE takes
BTS3900, BTS3900
ADD OMCH
LST OMCH NO, noeffect
maintenance
maintenance routeonly when
channel.
is bound
channel
MOD OMCH the
to remote
the
WCDMA, BTS3900 and anremote
maintenance active/standby takes NO
DSP OMCH maintenance
Indicates channel,
the session
LTE ADD OMCH remote
effect. Ifmaintenance
this parameter
BTS3900, BTS3900 LST OMCH and
number a remote
of the UDP
MOD OMCH channel
is switchover
setdetection
to NO, no
WCDMA, BTS3900 maintenance
ping
depends on the channel
bound NO
LTE
DSP
ADD OMCH
PACKETFILTER standby
switchover
to the route
remote does is UDP
bound
not
LST OMCH session
Indicates
to the detection,only
remote the cabinet
BTS3900, BTS3900 DSP PACKETFILTER trigger
maintenance
GSM a route
currently status
channel.
number
maintenance of thechannel, board
WCDMA, BTS3900 MOD PACKETFILTER switchover.
supports YES
ADD where thethis
and a remote packet function.
LTE RMV PACKETFILTER
PACKETFILTER Indicates
BTS3900, BTS3900 DSP PACKETFILTER If
maintenance is the
this parameter
filtering used. subrack
channelis set
LST PACKETFILTER number
to of
UDPSESSIONGRP, the board
WCDMA, BTS3900 MOD PACKETFILTER switchover does not YES
ADD where
the UDP the ping packet
LTE RMV PACKETFILTER
PACKETFILTER trigger
Indicates a route
the status
slot
BTS3900, BTS3900 DSP PACKETFILTER filtering
detection
switchover. is used.
is bound to
LST PACKETFILTER number of the board
WCDMA, BTS3900 MOD PACKETFILTER the remote YES
ADD where
maintenancethe packet channel
LTE RMV PACKETFILTER
PACKETFILTER Indicates
BTS3900, BTS3900 DSP PACKETFILTER filtering is theused.
and an active/standby port type.
LST PACKETFILTER The UMTS currently
WCDMA, BTS3900 MOD PACKETFILTER remote maintenance YES
ADD does not support
LTE RMV PACKETFILTER
PACKETFILTER channel switchover
BTS3900, BTS3900 DSP PACKETFILTER SUBIF.
depends
LST PACKETFILTER Indicates on thethe portUDP
WCDMA, BTS3900 MOD PACKETFILTER session group YES
number.
Indicates the IDGSM of an
LTE RMV PACKETFILTER detection,only
BTS3900, BTS3900 ADD PACKETFILTER
LST PACKETFILTER advanced ACL.
currently supports this The
WCDMA, BTS3900 DSP PACKETFILTER value
function.of this parameter NO
LTE LST PACKETFILTER ranges from 3000 to
3999.
Indicates whether to
permit or reject access
of the data that does
not match the ACL
rule. If this parameter
BTS3900, BTS3900 ADD PACKETFILTER is set to PERMIT, data
WCDMA, BTS3900 DSP PACKETFILTER that does not match NO
LTE ADD PACKETFILTER
LST PACKETFILTER the ACL rule
Indicates the is
typeallowed
of
BTS3900, BTS3900 DSP PACKETFILTER to pass. If this
sub-board
Indicates on
the the
ID of
whether an
WCDMA, BTS3900 MOD PACKETFILTER parameter
board where is set
packet toto YES
LTE RMV PACKETFILTER ACL
enable
DENY, at layer
the 2. The
advanced
data that does
BTS3900, BTS3900 ADD PACKETFILTER filter
value isofenabled.
this
LST PACKETFILTER ACL
not auto-setup
match
Indicates theparameter
the ACL rule
packet
WCDMA, BTS3900 DSP PACKETFILTER ranges
function
is from
discarded. for 4000
packet to NO
LTE LST PACKETFILTER filtering
4999. The
filtering. mode.
After The BS
BS this
filters
BTS3900, BTS3900 ADD PACKETFILTER can
packets
switch filter packets
isbased
enabled, on only
ACL
WCDMA, BTS3900 DSP PACKETFILTER based
rules in thethe
VLAN on
IDs. ACL group NO
LTE LST PACKETFILTER advanced
referencedACL, by layer-2
BTS3900, BTS3900 ADD PACKETFILTER ACL, or both at the MO
PACKECTFILTER
WCDMA, BTS3900 MOD PACKETFILTER
ADD PPPLNK same time. NO
are automatically
LTE LST PACKETFILTER
DSP PPPLNK Indicates thematched
cabinet
BTS3900, BTS3900 created and
MOD PPPLNK number of
with the following the board data
WCDMA, BTS3900 ADD YES
RMV PPPLNK
PPPLNK where the
flows: O&M, manualPPP link is
LTE DSP PPPLNK Indicates the subrack
BTS3900, BTS3900 RST PPPLNK located.
created SCTP link,
MOD PPPLNK
LST PPPLNK number
manual createdof the board
WCDMA, BTS3900 ADD YES
RMV PPPLNK
PPPLNK where
IPPATH, thetimePPPservice,
link is
LTE DSP PPPLNK Indicates the slot
BTS3900, BTS3900 RST PPPLNK located.
clock service,
MOD PPPLNK
LST PPPLNK
ADD PPPLNK number of the IKEboard and
WCDMA, BTS3900 PKI. YES
RMV PPPLNK
DSP PPPLNK where the PPP link is
LTE
BTS3900, BTS3900 RST PPPLNK
MOD PPPLNK located.
LST Indicates the number
WCDMA, BTS3900 RMVPPPLNK
PPPLNK YES
of the PPP link.
LTE RST PPPLNK
BTS3900, BTS3900 ADD PPPLNK
DSP DHCPRSLT Indicates the number
WCDMA, BTS3900 MOD PPPLNK
LST PPPLNK of the E1/T1 port that NO
LTE LST PPPLNK carries the PPP link.
BTS3900, BTS3900 ADD PPPLNK Indicates the
WCDMA, BTS3900 MOD PPPLNK authentication user NO
LTE LST PPPLNK name of the PPP link.
BTS3900, BTS3900 ADD PPPLNK Indicates the password
WCDMA, BTS3900 MOD PPPLNK for authenticating a NO
LTE LST PPPLNK PPP link. the number
Indicates
BTS3900, BTS3900 ADD PPPLNK
of the ET/T1 timeslot
WCDMA, BTS3900 MOD PPPLNK Indicates thethe local IP NO
that carries PPP
LTE LST PPPLNK
ADD PPPLNK address. If this
BTS3900, BTS3900 link.
MOD PPPLNK parameter
Indicates the is set
peertoIP
WCDMA, BTS3900 Indicates NO
LTE
DSP PPPLNK 0.0.0.0, this
address. Ifthe subnet
parameter
the BS is
ADD PPPLNK
LST PPPLNK mask
needsoftothe
connected betolocal
an IP
BTS3900, BTS3900
MOD PPPLNK address. If this
negotiated. node, this
upper-level
WCDMA, BTS3900 NO
DSP PPPLNK parameter
address is is set to
specified
LTE ADD PPPLNK
BTS3900, BTS3900 LST PPPLNK 0.0.0.0,
according to the to be
it needs
MOD PPPLNK negotiated. node. If the
WCDMA, BTS3900 upper-level NO
DSP PPPLNK
LTE ADD PPPLNK BS is cascaded to a
BTS3900, BTS3900 LST PPPLNK Indicates
MOD PPPLNK lower-levelwhether to
node, this
WCDMA, BTS3900 enable IP
address must be header NO
DSP PPPLNK
LTE compression.
specified. This
BTS3900, BTS3900 LST
ADDPPPLNK
PPPLNK Indicates
parameterwhether can be to set
WCDMA, BTS3900 MOD PPPLNK
ADD PPPLNK enable
to 0.0.0.0.IPHC NO
LTE LST PPPLNK
DSP PPPLNK suboption
Indicates the negotiation.
type of
BTS3900, BTS3900
MOD PPPLNK sub-board on the
WCDMA, BTS3900 Indicates the anumber YES
RMV PPPLNK
ADD RSCGRP board where PPP
LTE of
BTS3900, BTS3900 RST PPPLNK
DSP RSCGRP linkthe cabinet that
is located.
LST houses the board
WCDMA, BTS3900 MODPPPLNK
RSCGRP Indicates the number YES
ADD where a transmission
LTE RMV RSCGRP
RSCGRP of the subrack
BTS3900, BTS3900 DSP RSCGRP resource groupthat is
LST RSCGRP houses the board
WCDMA, BTS3900 MOD RSCGRP established. YES
Indicates the number
where a transmission
LTE ADD
RMV RSCGRP
RSCGRP of the slotgroup is
resource
BTS3900, BTS3900 DSP RSCGRP
LST RSCGRP corresponding
established. to the
WCDMA, BTS3900 MOD RSCGRP YES
board where a
LTE RMV RSCGRP
transmission resource
LST RSCGRP
group is established.
Indicates the maximum
ADD RSCGRP uplink
Indicates bandwidththe bearer of a
BTS3900, BTS3900 DSP RSCGRP transmission
type of the resource
WCDMA, BTS3900 MOD RSCGRP Indicates
group at the
transmission theMAC type of
group. YES
LTE ADD
RMV RSCGRP
RSCGRP sub-board
layer
The when
LTE on
the
currently the
Indicates the ID of a
BTS3900, BTS3900 DSP RSCGRP
LST RSCGRP transmission
does not
transmission support group.
resource ATM.
WCDMA, BTS3900 MOD RSCGRP Indicates
The
group LTE isWhen the resource
currently
carried type over of YES
ADD group. you add
LTE RMV RSCGRP
RSCGRP port
does
IP.
a
where
not
This
Indicates
PPP link,
a
support
parameter
the RX
anresource
MP
BTS3900, BTS3900 DSP RSCGRP
LST RSCGRP transmission
UNCHANNELLED_CO
value isan used as the
WCDMA, BTS3900 MOD RSCGRP bandwidth
group,
group is of a
Ethernet
carried. The YES
VERBOARD.
uplink
port, an transport
transmission Ethernet resource trunk,
LTE ADD
RMV RSCGRP
RSCGRP LTE currently
admission does
bandwidth not
Indicates
group.To
or a tunnel, the
LTE,thenumber
this
system
BTS3900, BTS3900 DSP RSCGRP
LST RSCGRP support
and TX STM1,
traffic IMA,
shaping
of the port where
parameter
automatically value createsisthe a
WCDMA, BTS3900 MOD RSCGRP Indicates
UNI, or FRAATM.
bandwidth.The the TX LMPT YES
ADD transmission
also used as resource
the
LTE RMV RSCGRP
RSCGRP transmission
committed
can beis
resource
burst size
configured with of
BTS3900, BTS3900 DSP RSCGRP group
Indicates
downlink
group with configured.
the rate unit
transport
LST RSCGRP a
a transmission
maximum of 360
WCDMA, BTS3900 MOD RSCGRP of the TX group.The
admission
Transmission
resource bandwidth, YES
Mbit/s
RX TX
bandwidth,
LTE RMV RSCGRP
ADD RSCGRP bandwidth.The
Resource
LMPT canGroup
bandwidth.The be TX WMPT
ID set
BTS3900, BTS3900 LST CIR,
minimum RX CIR,
rate TX PIR
MODRSCGRP
RSCGRP to
Indicates
configured
can be
the
with
configured
TX a with
WCDMA, BTS3900 and RX
supported
DEFAULTPORT(Defa
excessive
maximum PIR by of
burst
ofof the
the
400 size of NO
DSP RSCGRP a maximum 300
LTE ADD RSCGRP transmission
UMPTb
ult
a Port).
transmission
Mbit/s TX is 64
When resource
committed you
BTS3900, BTS3900 LST RSCGRP Mbit/s TX
MOD RSCGRP group.
Kbit/s.The
remove
resource
burst Theany
size.The LTE
LMPT thecan
of WMPT
group.The
WCDMA, BTS3900 bandwidth.The
currently
be
LMPT configured
preceding can doesbe with
objects, UMPT
not a
the NO
DSP RSCGRP can be configured with
LTE ADD RSCGRP or UTRPc
support
maximum
system
configured can
CELL/S.
of 540
automatically
with bea
BTS3900, BTS3900 LST RSCGRP a maximum of 600
MOD RSCGRP configured
Mbit/s
removes RX ofwith a
WCDMA, BTS3900 maximum
Mbit/s
Indicates
maximum TXthe the
of
450
committed
1receive
Gbit/s NO
DSP RSCGRP bandwidth.The
transmission
Mbit/s
Indicates
burst TX excessive
the WMPT
resource
transmit
LTE
LST RSCGRP CIR
TX
can ofsize.The
the
bandwidth.The
be configured
WMPT
with
BTS3900, BTS3900 ADD RSCGRP group.
burst
CIR
can of
besize.The
the
configured WMPT with
transmission
value
a maximumofconfigured resource
TX bandwidth
of 300
WCDMA, BTS3900 MOD RSCGRP can
a be
transmission
maximum
group. This ofresource
600 with NO
is
a set to
Mbit/s
maximum RX the parameter
maximum
of 600
LTE LST RSCGRP group.The
Mbit/s
Indicates
value is
ofTX LMPT
committed
the
usedbandwidth
asUMPTthecan
BTS3900, BTS3900 ADD RSCGRP Mbit/s
be
burst TXTX
bandwidth.The
configured
size.The
scheduling
downlink excessive
weight
transport with
UMPT aa
of
WCDMA, BTS3900 MOD RSCGRP supported
or UTRPc
burst size.The by
can the
be
UMPTor NO
maximum
or UTRPc
transmission
admission
board when of
can 360 be
resource
bandwidth
it bigger
LTE LST RSCGRP configured
UTRPc
Indicates
Mbit/s
configured
Indicates
group. TX can
This with
the be
committed
with
the a
receive
a
transmit
parameter
BTS3900, BTS3900 ADD RSCGRP for
than non-flow-control
maximum the maximum
of 1 Gbit/s
configured
PIR
PIR
is usedof
information
maximumof
services. the
theinaThe with
ofrate.The
1 a
Gbit/s
calculating
LMPT
WCDMA, BTS3900 MOD RSCGRP one.
RX For
bandwidth.The
maximum WMPT
of 1 Gbit/s and NO
transmission
UMPT
TX
transmission
the
can or
committed
bandwidth
be UTRPc
configured resource
burst
resource can
with
LTE LST RSCGRP a UTRP
value
TX ofThis
excessive (excluding
RX bandwidth
BTS3900, BTS3900 ADD RSCGRP
group.
be configured
size.The
group.The
scheduled
a maximum
UTRPa), value
LMPT
to
this ofaburst
parameter
with
of can
540 TXa
is set
size.The
value
maximum
committed
be to
isRX
configured the
value
used of maximum
1
burst as ofwhich
with the
Gbit/s TX
size is
WCDMA, BTS3900 MOD RSCGRP resource
Mbit/s
parameter
value
excessive of RX
group,
committed
does nota is
bandwidth
burst size NO
downlink
TX
set
helps committed
to
maximum the
achieve
information transport
maximum
of 360
rate. the Theuser
LTE LST RSCGRP specify
supported
Indicates
set to of
the thethe TXsize
by
maximum traffic
the of
BTS3900, BTS3900 ADD RSCGRP admission
information
value
Mbit/s
admission
UMPT orTX
TX bandwidth.
rate.The
committed
peak
control.
UTRPc can
shaping
board
the peak when bandwidth
burst it bigger
excessive of
WCDMA, BTS3900 MOD RSCGRP The
value
burst LMPT
of TX
size
information
be configured can
supported
rate.Thebe a
committed
with NO
the
than transmission
transmitted
LTE LST RSCGRP burst
UMPT thethe
maximum
resource
size
configured
information
by ormaximum
board from
supported
ofwith
rate
UTRPc
group 1when aisthe
Gbit/s
that set
itis
can
BTS3900, BTS3900 ADD RSCGRP one.
transmission
by
be the
maximum
to the
bigger board
maximum
than
configured of theresource
when
540with valueit
a
RX committed
carried
group.The on the LMPT PPP can
WCDMA, BTS3900 MOD RSCGRP bigger
Mbit/s
of TX
maximum than
RX
committed the
peak
one.
ofrate.
1 Gbit/s NO
information
link.
be configured with The a
LTE LST RSCGRP maximum
information
TX
value peakof RX one.
rate.
rate
information
committed The
BTS3900, BTS3900 ADD RSCGRP maximum
UMPT
supported
rate.The orvalue of
URTPc
by 540 ofiscan
the TX
information rate set
WCDMA, BTS3900 MOD RSCGRP Mbit/s
be
board
peak TX peak
configured
when
information it burst
with
bigger a
rate NO
to the
size.The maximumUMPT value
or
LTE LST RSCGRP maximum
than
is
of set
RX the
to ofmaximum
maximum
the
committed 1 Gbit/s
BTS3900, BTS3900 ADD RSCGRP UTRPc
RX
one.
value peakofcan be
information
TX peak
WCDMA, BTS3900 MOD RSCGRP information
configured rate
with a RX NO
rate. The
Indicates
information
supported value
the
by1number
rate theof
LTE LST RSCGRP maximum
peak
of theinformation
supported cabinet of Gbit/s
thatrate
byit the
BTS3900, BTS3900 board
TX peak when burst bigger
SET RSCGRPALG is set
houses
board
than to
when the
the
the maximum maximum
board
it bigger
WCDMA, BTS3900 size.The
Indicates
value of value
the of TX
number YES
LST RSCGRPALG where
than
one. the
Onlya RX maximum
the peak
transmissionLTE
LTE peak
of the burst
informationsubrack size
rate is set
that
BTS3900, BTS3900 resource
one.
supports group
this functionis
SET RSCGRPALG to the maximum
houses
supported
established. the board
by the value
WCDMA, BTS3900 currently.
Indicates
of TX peak the number
burst size YES
LST RSCGRPALG where
board when a transmission
it bigger
LTE of the
supported slot by the
BTS3900, BTS3900 resource
than the maximum group is
SET RSCGRPALG corresponding
board when
established.
one. Only
Indicates theittype
the to the
bigger
LTE of
WCDMA, BTS3900 YES
LST RSCGRPALG board
than
supportsthe
sub-board where onafunction
maximum
this the
LTE
BTS3900, BTS3900 transmission
one.
currently.
transmission resource
group.
SET RSCGRPALG group is occupied.
WCDMA, BTS3900 The LTE currently YES
LST RSCGRPALG Indicates the bearer
LTE does not support
BTS3900, BTS3900 type of the
UNCHANNELLED_CO
SET RSCGRPALG Indicates the group.
type of
WCDMA, BTS3900 transmission
VERBOARD. YES
LST RSCGRPALG port where a
LTE The LTE currently
BTS3900, BTS3900 transmission
does not support resource ATM.
SET RSCGRPALG
WCDMA, BTS3900 group is carried. The YES
LST RSCGRPALG
LTE LTE currently does not
support STM1, IMA,
UNI, or FRAATM.
and transmits
Indicates the ID of a
congestion
transmissionsignals. resource
If the buffered
group. When you back- add
pressure
a PPP link, packets
an MPare
less
group, than an 50%Ethernet of the
total buffer capacity,
port, an Ethernet trunk,
the
or aBS decides
tunnel,
Indicates thethe that
system
number
BTS3900, BTS3900 the transmission
automatically creates
SET RSCGRPALG of the portthe
Indicates where TXis the
WCDMA, BTS3900 resource
an algorithm group for the not YES
LST RSCGRPALG transmission
bandwidth resource
reserved for
LTE congested.
transmission In this
resource
BTS3900, BTS3900 group
signaling is configured.
or OM data.
SET RSCGRPALG situation,
group with no
WCDMA, BTS3900 This parameter
congestion signal shouldor YES
LST RSCGRPALG Transmission
LTE be set to aGroup
congestion value
release
BTS3900, BTS3900 Resource ID set
SET RSCGRPALG smaller
signal
to isthan the TX
transmitted.
WCDMA, BTS3900 bandwidth of a NO
LST RSCGRPALG When this
DEFAULTPORT(Defa parameter is
LTE Indicates
transmission the resource
reserved
BTS3900, BTS3900 set
ult to ENABLE,
Port). When which both
you
SET RSCGRPALG RX
group.bandwidth,
intra-mode The and inter-
WCDMA, BTS3900 remove
should any of
be setcontrols the
to a NO
LST RSCGRPALG recommended
mode
preceding traffic objects, the
LTE value smaller
BTS3900, BTS3900 reserved
are
systemsupported. TX than or
automatically
SET RSCGRPALG equal
bandwidth
The to theisRX
inter-mode lower traffic
WCDMA, BTS3900 removes the NO
LST RSCGRPALG bandwidth
than
control or equal
for of algorithm
ato 3% of
LTE ADD SCTPHOST for the transmission
transmission
the TX bandwidth
transmission resource
resource of a
BTS3900, BTS3900 LST SCTPHOST resource
Indicates
group. The group.
the UMTS ID of the
transmission
groups
Indicates applies
whether resource
only toto YES
LTE MOD SCTPHOST SCTP
currently
group.The host.does UMTS not
RMV SCTPHOST separate-MPT
enable
Indicates automatic
the baseof
index
ADD SCTPHOST support
currently
stations this
does function.
not
BTS3900, BTS3900 setup of with
the virtual an co-
IPSec
route and
MOD SCTPHOST support
transmission
tunnel this
between the function. NO
LTE forwarding(VRF)
LST SCTPHOST implemented
local end the andversionthrough
the peer
ADD SCTPHOST instance.
Indicates
BTS3900, BTS3900 backplane
end based
Indicates the on the IPv4
first
MOD SCTPHOST of the local
interconnection. IP address NO
LTE SECURITYHOST
address of the sctpand
LST SCTPHOST of an SCTP
However, link.
it does notin
ADD SCTPHOST SECURITYPEER
host, which is used
BTS3900, BTS3900 apply
MOs. to cascaded
ThewhetherIPSecoftoa
MOD SCTPHOST automatic
Indicates setup NO
LTE base
tunnel stations,
is used base
to
LST SCTPHOST Stream
enable Control
automatic
ADD SCTPHOST stations
encrypt
Transmission with
the co-
data to be
Protocol
BTS3900, BTS3900 setup of an IPSec
transmission
MOD SCTPHOST transmitted
(SCTP)between
tunnel link. on the
the NO
LTE implemented
Indicates the ID throughof the
LST SCTPHOST Stream
local end Control
and the peer
ADD SCTPHOST panel
security interconnection,
Transmission host Protocol
BTS3900, BTS3900 end based
Indicates the on the
second
MOD SCTPHOST or
referenced
base link
(SCTP) stationsbythat theisfirst
set NO
LTE SECURITYHOST
IPv4 address of and
LST SCTPHOST enabled
IP
up address
using with
the offirstthethe
route IP
ADD SCTPHOST SECURITYPEER
sctp
load host,
BTS3900, BTS3900 SCTP
address
MOs. The ofwhich
sharing.
host. the sctp
IPSec
is
MOD SCTPHOST used
When
host intheautomatic
oristhe inter-mode
data NO
LTE
LST SCTPHOST tunnel
setup
traffic of aused
control Stream toto be
function
ADD SCTPHOST transmitted
encrypt thefor on
data the to be
BTS3900, BTS3900 Control
is
IPv6enabled
SCTP Transmission
link a that is
MOD SCTPHOST transmitted
Protocol
separate-MPT (SCTP) on the
base link. NO
LTE set up
Indicates using the the
ID first
of the
LST SCTPHOST Stream
station Control
with
ADD SCTPHOST IPv6
securityaddress
Transmission hostco- of the
Protocol
BTS3900, BTS3900 transmission
sctp host.
Indicates the number
MOD SCTPHOST referenced
(SCTP) linkby that theis set NO
LTE implemented
of the local SCTP through port,
LST SCTPHOST second
up using IPthe address
second ofIP
ADD SCTPHOST backplane
which
the SCTP is used host. in
BTS3900, BTS3900 address of the sctp
interconnection, the
MOD SCTPHOST automatic
host or the setup
data of be
to a NO
LTE Tunnel Type
Indicates the ID of the
LST SCTPHOST Stream
transmitted Control on the
ADD SCTPHOST parameter
SCTP parameters
Transmission must be set
Protocol
BTS3900, BTS3900 IPv6
to SCTP
DL(DL) for link the that is
MOD SCTPHOST template
(SCTP) referenced
link. the by NO
LTE set
tunnelup using
of the
LST SCTPHOST the SCTP linkmode that is
ADD second IPv6 address
BTS3900, BTS3900 ADD SCTPHOST
SCTPLNK Indicates
providing
automatically
of the sctp
the
transmission
host.
set up.
MOD SCTPHOST
BLK SCTPLNK description
ports and mustthe of be set NO
LTE
LST SCTPHOST
DSP SCTPLNK SCTP
to UL(UL) host. for the
BTS3900, BTS3900 tunnel of the
LST SCTPLNK Indicates the mode number
WCDMA, BTS3900 providing no link. YES
MOD SCTPLNK of the SCTP
LTE transmission port.
BTS3900, BTS3900 RMV SCTPLNK
ADD SCTPLNK Indicates the cabinet
WCDMA, BTS3900 RST SCTPLNK
DSP SCTPLNK number of the SCTP NO
LTE UBL SCTPLNK
LST SCTPLNK link.
BTS3900, BTS3900 ADD SCTPLNK Indicates the subrack
WCDMA, BTS3900 DSP SCTPLNK number of the SCTP NO
LTE LST SCTPLNK link.
BTS3900, BTS3900 ADD SCTPLNK Indicates the slot
WCDMA, BTS3900 DSP SCTPLNK number of the SCTP NO
LTE LST SCTPLNK
ADD SCTPLNK link.
BTS3900, BTS3900 Indicates the first local
MOD SCTPLNK
WCDMA, BTS3900 IP address of the NO
DSP SCTPLNK
LTE SCTP link.
LST SCTPLNK
ADD SCTPLNK
BTS3900, BTS3900 Indicates the second
MOD SCTPLNK
WCDMA, BTS3900 local IP address of the NO
DSP SCTPLNK
LTE ADD SCTPLNK SCTP link.
BTS3900, BTS3900 LST SCTPLNK Indicates the local port
MOD SCTPLNK
WCDMA, BTS3900 number of the SCTP NO
DSP SCTPLNK
LTE ADD SCTPLNK link.
BTS3900, BTS3900 LST SCTPLNK Indicates the first peer
MOD SCTPLNK
WCDMA, BTS3900 IP address of the NO
DSP SCTPLNK
LTE ADD SCTPLNK SCTP link.
BTS3900, BTS3900 LST SCTPLNK Indicates the second
MOD SCTPLNK
WCDMA, BTS3900 peer IP address
Indicates
Indicates the
the maximum of the
maximum NO
DSP SCTPLNK
LTE ADD SCTPLNK SCTP
number
number link.
of
ofthe peer port
BTS3900, BTS3900 LST SCTPLNK Indicates
MOD SCTPLNK retransmissions
retransmissions for
over thea
WCDMA, BTS3900 number
SCTP of the SCTP
association. NO
DSP SCTPLNK path. When the
LTE link.
When the
BTS3900, BTS3900 LST
ADDSCTPLNK
SCTPLNK number of number of
retransmissions
retransmissions for over thea
WCDMA, BTS3900 MOD SCTPLNK NO
association
path exceeds the exceeds
LTE LST SCTPLNK
BTS3900, BTS3900 ADD SCTPLNK the
valuevalue
of this of this
WCDMA, BTS3900 MOD SCTPLNK parameter,
parameter, the the SCTPpath is NO
LTE LST SCTPLNK link is broken
regarded and aif no
as failed
BTS3900, BTS3900 ADD SCTPLNK link failurethe
Indicates
heartbeat alarmpeeris
WCDMA, BTS3900 MOD SCTPLNK reported.
description
acknowledgment is information NO
LTE LST SCTPLNK Indicates
of the SCTP
received. the index of
link.
If multiple
BTS3900, BTS3900 ADD SCTPLNK a VRF instance.
paths are used, path The
WCDMA, BTS3900 MOD SCTPLNK UMTS currently
switching is NO
LTE LST
ADDSCTPLNK
SCTPPEER supports
automatically default routes
BTS3900, BTS3900 LST SCTPPEER domain
Indicates
performed. onlythe ID of the
Indicates whether to YES
LTE MOD SCTPPEER SCTP peer.
RMV SCTPPEER enable
Indicates automatic
the index of
ADD SCTPPEER setup of anroute IPSec
BTS3900, BTS3900 the virtual and
MOD SCTPPEER tunnel between the NO
LTE forwarding(VRF)
LST SCTPPEER local end the andversion
the peer
ADD SCTPPEER instance.
Indicates
BTS3900, BTS3900 end based
Indicates on
the the IPv4
first
MOD SCTPPEER of the peer IP address NO
LTE SECURITYHOST
address of the peer and
LST SCTPPEER of an SCTP link.
ADD SCTPPEER SECURITYPEER
end, which is used in
BTS3900, BTS3900 MOs. Thewhether
IPSecoftoa
MOD SCTPPEER automatic
Indicates setup NO
LTE tunnel is
LST SCTPPEER Controlto
Stream automatic
enable used
ADD SCTPPEER encrypt
setup ofthe
Transmission an data to be
Protocol
IPSec
BTS3900, BTS3900
MOD SCTPPEER transmitted
(SCTP)
tunnel link.
between on the NO
LTE
LST SCTPPEER Indicates
Stream the ID the
Control of the
ADD SCTPPEER local end
security peer and the peer
BTS3900, BTS3900 Transmission Protocol
MOD SCTPPEER end basedthe
Indicates
referenced onsecond
the
LTE (SCTP)
SECURITYHOST linkby thattheisfirst
set
and
NO
LST SCTPPEER IP
IP
up address
address
using the of
of the
the
first sctp
IP
ADD SCTPPEER SECURITYPEER
peer, which is used
BTS3900, BTS3900 SCTP
address
MOs.
peer.
The ofIPSec
the sctp for
MOD SCTPPEER automatically
peer or the data setting NO
LTE
LST SCTPPEER tunnel
up is usedControl
a Stream to to be
ADD SCTPPEER transmitted
encrypt the dataon theto be
BTS3900, BTS3900 Transmission
IPv6 SCTP linkProtocol
that is
MOD SCTPPEER transmitted
(SCTP) on the
link. the first NO
LTE set up using
Indicates the ID of the
LST SCTPPEER Stream Control
ADD SCTPPEER IPv6
securityaddress
Transmission peer of the
Protocol
BTS3900, BTS3900 sctp peer.
Indicates the number
MOD SCTPPEER referenced by
(SCTP) link that is set the NO
LTE of
LST SCTPPEER upthe
second
usingpeerIPthe SCTP
address
second port,
ofIP
ADD SCTPPEER which
the is used
SCTPofpeer.
address in
the sctp
BTS3900, BTS3900
MOD SCTPPEER automatic
peer or the
Indicates setup
data of
whether totoabe NO
LTE
LST SCTPPEER Stream
transmitted
enable Control
the on
peer the
end to
ADD SCTPPEER Indicates
Transmission the Protocol
BTS3900, BTS3900 IPv6
perform SCTP IPSec link that is
MOD SCTPPEER
ADD SECURITYHOST description
(SCTP) link.of the NO
LTE set up peer.
using
negotiation the the
with
LST SCTPPEER
LST SECURITYHOST SCTP
BTS3900, BTS3900 second
local end IPv6 address
through an
MOD Indicates
of the sctp
SeGW. Whenthe
peer.security
this
WCDMA, BTS3900 YES
SECURITYHOST host ID. is set to
parameter
LTE ADD
BTS3900, BTS3900 RMV SECURITYHOST DISABLE, the peer
MOD
SECURITYHOST
WCDMA, BTS3900 end performs IPSec NO
SECURITYHOST
LTE negotiation with the
LST SECURITYHOST
local end directly.
When this parameter is
set to ENABLE, the
peer end establishes
an IPSec tunnel to the
peer end through a
ADD SECURITYHOST
BTS3900, BTS3900 Indicates the
MOD
WCDMA, BTS3900 configuration mode of NO
SECURITYHOST
LTE ADD SECURITYHOST the security gateway.
BTS3900, BTS3900 LST SECURITYHOST Indicates the version
MOD
WCDMA, BTS3900 of the security host IP NO
SECURITYHOST This parameter is used
LTE ADD SECURITYHOST address.
BTS3900, BTS3900 LST SECURITYHOST to designate the
MOD
WCDMA, BTS3900 physical port of the NO
SECURITYHOST
LTE ADD SECURITYHOST IPSec Policy Group
BTS3900, BTS3900 LST SECURITYHOST
MOD Binding.
Indicates thethe name
name of of
WCDMA, BTS3900 Indicates NO
SECURITYHOST the
the IKE
IPSec peer.
proposal
LTE ADD SECURITYHOST
BTS3900, BTS3900 LST SECURITYHOST used for IPSec
MOD
WCDMA, BTS3900 negotiation between NO
SECURITYHOST
LTE ADD SECURITYHOST the local end
Indicates andofthe
the ID the
BTS3900, BTS3900 LST SECURITYHOST
MOD security
security gateway
parameter
WCDMA, BTS3900 (SeGW).
Indicates whether to by NO
SECURITYHOST template referenced
LTE ADD SECURITYHOST enable the peer
BTS3900, BTS3900 LST SECURITYHOST the security
Indicates the host.end to
MOD perform IPSec
WCDMA, BTS3900 description of the NO
SECURITYHOST
ADD SECURITYPEER negotiation with the
LTE security host.
BTS3900, BTS3900 LST
LST SECURITYHOST
SECURITYPEER local end through an
Indicates
SeGW. When the ID of a
this
WCDMA, BTS3900 MOD YES
security peer.
parameter is set to
LTE SECURITYPEER
ADD SECURITYPEER
BTS3900, BTS3900 RMV DISABLE, the peer
MOD SECURITYPEER
WCDMA, BTS3900 end performs IPSec NO
SECURITYPEER
LTE ADD SECURITYPEER negotiation with the
BTS3900, BTS3900 LST SECURITYPEER Indicates
MOD local end the version
directly.
WCDMA, BTS3900 of the security
When this parameter peer IPis NO
SECURITYPEER
LTE ADD SECURITYPEER address.
set to ENABLE, the
BTS3900, BTS3900 LST SECURITYPEER Indicates the IPv4
MOD peer end establishes
WCDMA, BTS3900 address
Indicates
an IPSec theof thename
tunnel IKE of
to the NO
SECURITYPEER
LTE ADD SECURITYPEER peer.
the
localIKE
endpeer. The the
through IKE
BTS3900, BTS3900 LST SECURITYPEER
MOD peer
SeGW. is thethe
Indicates security
name of
WCDMA, BTS3900 NO
SECURITYPEER gateway
the IPSecthat performs
proposal
LTE ADD SECURITYPEER
BTS3900, BTS3900 LST SECURITYPEER IKE
used for IPSec with
negotiation
MOD the local end.
WCDMA, BTS3900 ADD negotiation between
Indicates whether to NO
SECURITYPEER
LTE SECURITYTEMPLAT
ADD SECURITYPEER the local
enable end
the andend
peer theto
BTS3900, BTS3900 LST SECURITYPEER Indicates the
E
MOD security
perform gateway
IPSec
WCDMA, BTS3900 LST description
(SeGW). of a NO
SECURITYPEER negotiation with the
LTE SECURITYTEMPLAT security peer.
BTS3900, BTS3900 LST SECURITYPEER
ADD local
Indicates the ID ofan
end through the
E
SECURITYTEMPLAT SeGW.
WCDMA, BTS3900 security When this
parameter YES
MOD
E parameter
LTE template. is set to
BTS3900, BTS3900 SECURITYTEMPLAT
ADD
MOD DISABLE, the peer
WCDMA, BTS3900 E
SECURITYTEMPLAT
SECURITYTEMPLAT end performs IPSec NO
LTE RMV
E
E negotiation with the
BTS3900, BTS3900 ADD
SECURITYTEMPLAT
MOD
LST Indicates
local end the IKE V1
directly.
SECURITYTEMPLAT
E Indicates the ID of the
WCDMA, BTS3900 SECURITYTEMPLAT
SECURITYTEMPLAT exchange
When mode.
this parameter is NO
E IKE proposal.
LTE E
E There are two the
set to ENABLE,
BTS3900, BTS3900 ADD
MOD
LST exchange modes:
SECURITYTEMPLAT peer
Indicates establishes
end the name of
WCDMA, BTS3900 SECURITYTEMPLAT
SECURITYTEMPLAT main
an mode
IPSec and to the
tunnel NO
E the IPSec proposal.
LTE E
E aggressive mode. the
local end through In
BTS3900, BTS3900 ADD
MOD
LST main mode,
Indicates
SeGW. the IKE keys are
WCDMA, BTS3900 SECURITYTEMPLAT
SECURITYTEMPLAT
SECURITYTEMPLAT NO
exchanged separately
protocol version.
LTE E
E
E
ADD from identity
BTS3900, BTS3900 MOD
LST
SECURITYTEMPLAT information, which
WCDMA, BTS3900 SECURITYTEMPLAT
SECURITYTEMPLAT NO
E protects
Indicatesidentity
the
LTE E
E
BTS3900, BTS3900 MOD information
preshared key. andBoth
hence
LST
WCDMA, BTS3900 SECURITYTEMPLAT enhances
ends must use the In
security. NO
SECURITYTEMPLAT
LTE E aggressive
same preshared mode,key in
E
ADD SUBNETVLAN
BTS3900, BTS3900 LST identity information
Indicates
negotiation. the sourceisIP
LST SUBNETVLAN not protected, but
WCDMA, BTS3900 SECURITYTEMPLAT address used for YES
MOD SUBNETVLAN requirements of
LTE E mapping the VLAN.
RMV SUBNETVLAN specific network
environments can be
met.
Indicates whether to
enable the TCP ACK
limit algorithm. When
this switch is set to on,
ADD SUBNETVLAN the base station
Indicates the subnet limits
BTS3900, BTS3900 the
LST SUBNETVLAN mask of the sourceofIP
ACK data rate
WCDMA, BTS3900 downlink TCP for services YES
MOD SUBNETVLAN address used
LTE based
BTS3900, BTS3900 RMV SUBNETVLAN
ADD SUBNETVLAN mapping the VLAN. of
on the value
DL Throughput
Indicates the VLAN ID
WCDMA, BTS3900 MOD SUBNETVLAN Indicates
Threshold. the maximum
Intag.
this NO
in the VLAN
LTE LST
MODSUBNETVLAN downlink
case, the service
Indicates ACKUL
the burst
Over of
BTS3900, BTS3900 TCPACKLIMITALG throughput
downlink
Load TCP
Control that can be
services
(OLC)
set by the switch.
TCP ACK NO
LTE LST is prevented
algorithm and the
In the
MOD
TCPACKLIMITALG limit
KPIs algorithm.
related
case of enabled to When
the
BTS3900, BTS3900 TCPACKLIMITALG this switch
downlink
switch, the is set to on,
throughput
bandwidth NO
LTE LST the
rate
of ACK
theare burst of
improved,
services withbut low
TCPACKLIMITALG downlink
the packet
priority TCP
would services
forwarding
be
BTS3900, BTS3900 SET TOLCALG is avoidedto
capability ofand the is
boards
released guarantee NO
LTE LST
ADDTOLCALG
TUNNEL KPIs related
affected. When to the
this
the QoS of
Indicates the thenumber
BTS3900, BTS3900 DSP TUNNEL downlink
switch
services is throughput
set
of to
high off, the
priority
of
arethe source cabinet
improved.
WCDMA, BTS3900 MOD TUNNEL base
when station
the TX does not YES
ADD where the tunnel is
LTE RMV TUNNEL
TUNNEL limit the ACK
bandwidth
Indicates data rate
changes
the number or
BTS3900, BTS3900 DSP TUNNEL configured.
LST TUNNEL of downlink
during
of TCP
the overload
the source subrack
WCDMA, BTS3900 MOD TUNNEL services.
causedthe by tunnel
real-time YES
ADD where is
LTE RMV TUNNEL
TUNNEL Indicates
services. the number
BTS3900, BTS3900 DSP TUNNEL configured.
LST TUNNEL of the source slot
WCDMA, BTS3900 MOD TUNNEL YES
ADD where the tunnel is
LTE RMV TUNNEL
TUNNEL
BTS3900, BTS3900 DSP TUNNEL configured.
LST TUNNEL Indicates the index of
WCDMA, BTS3900 MOD TUNNEL YES
the tunnel.
LTE RMV TUNNEL
ADD TUNNEL Indicates the number
BTS3900, BTS3900 LST TUNNEL
MOD TUNNEL of the destination
WCDMA, BTS3900 NO
DSP TUNNEL cabinet where the
LTE ADD TUNNEL Indicates the number
BTS3900, BTS3900 LST TUNNEL tunnel is located.
MOD TUNNEL of the destination
Indicates the type of
WCDMA, BTS3900 NO
DSP TUNNEL subrack where the
the tunnel.When this
LTE ADD TUNNEL Indicates the number
BTS3900, BTS3900 LST TUNNEL tunnel
parameteris located.
is set to
MOD TUNNEL of the destination
UL(UL), the direction slot
WCDMA, BTS3900 NO
DSP TUNNEL where the tunnel
of the tunnel is from is
LTE
BTS3900, BTS3900 LST
ADDTUNNEL
TUNNEL located.
the converged party to
WCDMA, BTS3900 MOD TUNNEL the converging party. NO
LTE ADD TWAMPCLIENT
LST TUNNEL When this parameter is
BTS3900, BTS3900 DSP TWAMPCLIENT set to DL(DL), the of
Indicates the index
WCDMA, BTS3900 LST TWAMPCLIENT direction YES
a TWAMP client.tunnel
of this
LTE MOD TWAMPCLIENT
ADD TWAMPCLIENT is from the converging
BTS3900, BTS3900 RMV TWAMPCLIENT Indicates
party to the theconverged
local IP
MOD TWAMPCLIENT
WCDMA, BTS3900 address
party. of a TWAMP NO
DSP TWAMPCLIENT
LTE ADD TWAMPCLIENT client.
BTS3900, BTS3900 LST TWAMPCLIENT Indicates the peer IP
MOD TWAMPCLIENT
ADD
WCDMA, BTS3900 address of a TWAMP NO
DSP TWAMPCLIENT
TWAMPRESPONDER
LTE ADD TWAMPCLIENT client.
Indicates the DSCP of
BTS3900, BTS3900 LST TWAMPCLIENT
DSP
MOD TWAMPCLIENT
TWAMPRESPONDER TCP negotiation
WCDMA, BTS3900 NO
DSP
DSP TWAMPCLIENT packets sent by a
LTE
BTS3900, BTS3900 LST TWAMPCLIENT
TWAMPRESPONDER TWAMP client.
ADD Indicates the index of
WCDMA, BTS3900 STA
TWAMPRESPONDER YES
a TWAMP responder.
LTE LST
MOD
BTS3900, BTS3900 TWAMPRESPONDER
ADD Indicates the local IP
TWAMPRESPONDER
WCDMA, BTS3900 MOD
TWAMPRESPONDER address of a TWAMP NO
DSP
LTE TWAMPRESPONDER
MOD responder.
Indicates the DSCP of
BTS3900, BTS3900 TWAMPRESPONDER
RMV
TWAMPRESPONDER
LST TWAMPSENDER
ADD TCP negotiation
WCDMA, BTS3900 TWAMPRESPONDER NO
DSP
TWAMPRESPONDER
DSP TWAMPSENDER packets sent by a
LTE
BTS3900, BTS3900 TWAMPRESPONDER
LST TWAMPSENDER TWAMP
Indicatesresponder.
the client
WCDMA, BTS3900 LST
ADD
MOD TWAMPSENDER index of a TWAMP YES
LTE TWAMPRESPONDER
DSP TWAMPSENDER
TWAMPSENDER sender.
BTS3900, BTS3900 LST
RMVTWAMPSENDER Indicates the index of
WCDMA, BTS3900 MOD
TWAMPSENDER YES
a TWAMP sender.
LTE TWAMPSENDER
RMV
TWAMPSENDER
ADD TWAMPSENDER Indicates the DSCP of
BTS3900, BTS3900
MOD UDP measurement
WCDMA, BTS3900 NO
TWAMPSENDER packets sent by a
LTE ADD TWAMPSENDER
BTS3900, BTS3900 LST TWAMPSENDER TWAMP sender.
Indicates the size type
MOD
WCDMA, BTS3900 of packets sent by a NO
TWAMPSENDER
LTE ADD TWAMPSENDER TWAMP
Indicatessender. the size of
BTS3900, BTS3900 LST TWAMPSENDER
MOD packets sent by a
WCDMA, BTS3900 NO
TWAMPSENDER TWAMP sender, IP
LTE ADD TWAMPSENDER Indicates
BTS3900, BTS3900 LST TWAMPSENDER header is the type of
included.
MOD the interval at which
WCDMA, BTS3900 NO
TWAMPSENDER packets are sent by a
LTE ADD TWAMPSENDER Indicates the interval
BTS3900, BTS3900 LST TWAMPSENDER TWAMP sender.
MOD at which packets are
WCDMA, BTS3900 NO
TWAMPSENDER
ADD UDPSESSION sent by a TWAMP
LTE
BTS3900, BTS3900 LST
DSP TWAMPSENDER
UDPSESSION sender.
Indicates the UDP
WCDMA, BTS3900 LST UDPSESSION YES
ADD session number.
LTE MOD UDPSESSION
UDPSESSION Indicates the cabinet
BTS3900, BTS3900 MOD UDPSESSION
RMV UDPSESSION number of the board
WCDMA, BTS3900 UDPECHO NO
ADD UDPSESSION where the UDP
LTE DSP UDPSESSION Indicates
BTS3900, BTS3900 MOD UDPSESSION session isthe subrack
located.
LST UDPSESSION number of the board
WCDMA, BTS3900 UDPECHO NO
ADD UDPSESSION where thethe
Indicates UDP local IP
LTE DSP UDPSESSION Indicates the slot
BTS3900, BTS3900 MOD UDPSESSION session isThe
address. located.
local IP
LST UDPSESSION number of the board
WCDMA, BTS3900 UDPECHO address must be the NO
ADD UDPSESSION where the UDP
configured IP address
LTE DSP UDPSESSION
BTS3900, BTS3900 MOD UDPSESSION session
Indicates
on the board,isthe
located.
peer
suchIP as
LST UDPSESSION
WCDMA, BTS3900 UDPECHO address.
the Ethernet Theport IP IP NO
LTE ADD UDPSESSION
DSP UDPSESSION address
address,cannot
Indicates or
thelogical be IP
number
BTS3900, BTS3900 MOD UDPSESSION
LST UDPSESSION 0.0.0.0,
address.
of the user broadcast
The data address IP
WCDMA, BTS3900 UDPECHO address,
Indicates
of the local
type.Numbers multicast
the ID 1~9 IP
of the
are NO
LTE DSP
ADD UDPSESSION
UDT address,
transport
maintenance
standard user
Indicates loopback
parameter
the ID Ethernet
data IP
of the
BTS3900, BTS3900 LST
MODUDPSESSION
UDT address,
group
port
types, cannot
transport whichor
related any
be toused.
are
parameter the
existing YES
LTE RMV UDT group related to the in
services
automatically IP address
corresponding
LST the
to ansystem.
QCI.User data
ADDUDT
UDT configured
service thatby the BS.
BTS3900, BTS3900 type
Numbersnumbers
Indicates
corresponds the
10~254 1~9
rule
to thefor
are
MOD UDT NO
LTE correspond
prioritizing
extended
QCI. user
It uniquely to user
traffic datato
LST UDT
ADD UDTPARAGRP data
types.type
meet
identifiesserviceatransfer
transport
BTS3900, BTS3900 LST UDTPARAGRP parameter
parameter group
requirements. IDs
If this
group.User YES
LTE MOD UDTPARAGRP 40~48,
Indicates
parameter which
the aretoof1~9
type
is set
data type numbers
RMV UDTPARAGRP
ADD UDTPARAGRP automatically
primary
IPPRECEDENCE, transport
BTS3900, BTS3900 correspond to user the
MOD UDTPARAGRP Indicates
configured
resource
protocol
data typestack the
usedbypriority
transfer the
to the
of BS.of NO
LTE the service
transmit the data,
user which
date
LST UDTPARAGRP earlier version
parameter group IDs is
ADD UDTPARAGRP is identified
when
adopted,
40~48, hybridwhich
which byare afirstly
DSCP
BTS3900, BTS3900
MOD UDTPARAGRP value.
transmission
converts The
automatically priority
a Type is ofof NO
LTE
LST UDTPARAGRP the service
adopted.
Service
Indicates
configured HQ
(TOS)
thedata
by tohasaBS.a
indicates
activity
the
ADD UDTPARAGRP positive
that
DSCPof correlation
high-quality
and
BTS3900, BTS3900 factor thethenservices
MOD UDTPARAGRP with the DSCP
transport
prioritizes resources
traffic. value. NO
LTE corresponding to an
LST UDTPARAGRP are used, while LQ
ADD UDTPARAGRP QCI.
Indicates the primary
BTS3900, BTS3900 indicates that low- of
port load threshold
MOD UDTPARAGRP NO
LTE quality
the user transport
data in the
LST UDTPARAGRP Indicates the
ADD UDTPARAGRP resources
hybrid areprimary-
transmission used.
BTS3900, BTS3900 to-secondary
When a new port load
service
MOD UDTPARAGRP scenario.
ratio threshold A larger of user NO
LTE requests admission
LST UDTPARAGRP value
data in indicates
the hybrid that
ADD
ADD UDTPARAGRP and admission
services are more control
BTS3900, BTS3900 transmission
is performed, scenario.
one of to
MOD UDTPARAGRP
USERPLANEHOST likely to bevalue admitted NO
LTE A
thesmaller
IP path routes with
LST
LST UDTPARAGRP the primary path.
BTS3900, BTS3900 indicates
transport that services
resources of
USERPLANEHOST Indicates
are more likely the IDtoofbe the
WCDMA, BTS3900 ADD the same quality is YES
MOD user-plane
admitted to host.
the primary
LTE USERPLANEHOST used as the
Indicates theprimary
index of
BTS3900, BTS3900 USERPLANEHOST path.
MOD
RMV transport
the virtualpath. route and
WCDMA, BTS3900 NO
USERPLANEHOST
USERPLANEHOST forwarding(VRF)
LTE
LST instance.
USERPLANEHOST
ADD
USERPLANEHOST
BTS3900, BTS3900 Indicates the version
MOD
WCDMA, BTS3900 ADD of the user-plane host NO
USERPLANEHOST
LTE USERPLANEHOST IP address.
BTS3900, BTS3900 LST Indicates the whether IP to
MOD
USERPLANEHOST
WCDMA, BTS3900 ADD Address
enable automaticof the user NO
USERPLANEHOST Indicates theIPSecIPv6
LTE USERPLANEHOST plane of
setup host. an
LST Address of the user
BTS3900, BTS3900 MOD
USERPLANEHOST tunnel between the
ADD plane host.
local end and Thisthe peer NO
LTE USERPLANEHOST
USERPLANEHOST parameter
end based takes on theeffect
BTS3900, BTS3900 LST
MOD only in LTE.
SECURITYHOST and
WCDMA, BTS3900 USERPLANEHOST NO
ADD
USERPLANEHOST SECURITYPEER
LTE USERPLANEHOST
BTS3900, BTS3900 LST MOs.
Indicates Thethe IPSec security
MOD
USERPLANEHOST tunnel is used tothe
WCDMA, BTS3900 ADD host ID used by NO
USERPLANEHOST encrypt
LTE USERPLANEHOST user-plane host. to be
the data
BTS3900, BTS3900 LST transmitted
Indicates theon the
ADD
MOD
USERPLANEHOST
WCDMA, BTS3900 USERPLANEPEER internal
description userofplane the user- NO
USERPLANEHOST paths.local device.
LTE LST plane
BTS3900, BTS3900 LST
USERPLANEPEER
USERPLANEHOST Indicates the ID of the
WCDMA, BTS3900 ADD YES
MOD user-plane peer.
LTE USERPLANEPEER Indicates the index of
BTS3900, BTS3900 USERPLANEPEER
MOD
RMV the virtual route and
WCDMA, BTS3900 ADD NO
USERPLANEPEER
USERPLANEPEER forwarding(VRF)
LTE USERPLANEPEER
BTS3900, BTS3900 LST instance. the version
Indicates
MOD
USERPLANEPEER
WCDMA, BTS3900 ADD of the user-plane peer NO
USERPLANEPEER
LTE USERPLANEPEER IP address.
BTS3900, BTS3900 LST Indicates the whether IP to
MOD
USERPLANEPEER
WCDMA, BTS3900 ADD Address
enable automaticof the user NO
USERPLANEPEER Indicates theIPSecIPv6
LTE USERPLANEPEER plane of
setup peer. an
LST Address of the user
BTS3900, BTS3900 MOD
USERPLANEPEER tunnel between the
ADD plane peer.
local end and Thisthe peer NO
LTE USERPLANEPEER
USERPLANEPEER parameter
end based takes on theeffect
BTS3900, BTS3900 LST
MOD only in LTE.
SECURITYHOST and
WCDMA, BTS3900 USERPLANEPEER NO
ADD
USERPLANEPEER SECURITYPEER
LTE USERPLANEPEER
BTS3900, BTS3900 LST MOs.
Indicates Thethe IPSec security
MOD
USERPLANEPEER tunnel
Indicates is used
whether to the to
WCDMA, BTS3900 ADD peer ID used by NO
USERPLANEPEER encrypt the data
LTE USERPLANEPEER
LST
set the
user-planethe
Indicates
Indicates
priority
the VLANbe
peer. of to
a
BTS3900, BTS3900 transmitted
single
mode. VLAN.
Whenofthison the
When
MOD
USERPLANEPEER information
internal user the
plane
WCDMA, BTS3900 this parameter
parameter
Indicates theis set is to
index setofto NO
USERPLANEPEER user-plane
paths. peer
LTE ADD ENABLE,
SINGLEVLAN, the VLAN the
BTS3900, BTS3900 LST VLANMAP a VRF
device. instance. The
MOD VLANMAP priority
configured
UMTS currentlyis configured
VLAN ID by
WCDMA, BTS3900 USERPLANEPEER YES
RMV VLANMAP running
and the
VLANdefault
supports ADDroutes
priority can
LTE ADD VLANMAP VLANMAP
be directly command.
used to
BTS3900, BTS3900 LST VLANMAP domain
Indicates only
the (the VRF
next hopis
MOD VLANMAP When
label isthis
the VLANparameter
WCDMA, BTS3900 index
IP
set address
to
0).
DISABLE, usedtag. for
the YES
RMV VLANMAP If this parameter is set
LTE ADD VLANMAP mapping
Indicates
VLAN the VLAN.
the subnet
priority is the
BTS3900, BTS3900 LST VLANMAP to VLANGROUP,
MOD VLANMAP mask
determined
next hop of the IP by next thehop
addresses
WCDMA, BTS3900 YES
RMV VLANMAP IP address
mapping
are mapped to the used
between for
LTE
BTS3900, BTS3900 LST
ADDVLANMAP
VLANMAP mapping
DSCP
VLAN groups, and the VLAN.
VLAN and
WCDMA, BTS3900 MOD VLANMAP priority.
then mapped This mappingto the NO
LTE LST VLANMAP can
VLAN tags in the by
be configured
BTS3900, BTS3900 ADD VLANMAP running
VLAN the SET
groups
Indicates
DSCPMAP thecommand.
VLAN ID
WCDMA, BTS3900 MOD VLANMAP according to tag.
the NO
in
The the VLAN
default mapping
LTE LST VLANMAP DSCPs of the IP
BTS3900, BTS3900 ADD VLANMAP between
packets. DSCP
In VLAN and
Indicates the VLAN
WCDMA, BTS3900 MOD VLANMAP VLAN priority
group mode, ensure is as NO
priority.
LTE LST VLANMAP follows:
that the VLAN groups
BTS3900, BTS3900 ADD VLANMAP If the been
DSCP isVLAN
within
Indicates
have the configured
WCDMA, BTS3900 MOD VLANMAP the range from 0 to 7, NO
group
by running number. the ADD
LTE LST VLANMAP the default priority is 0;
BTS3900, BTS3900 ADD VLANMAP VLANCLASS
If the DSCPOtherwise,
command. is within
WCDMA, BTS3900 MOD VLANMAP NO
the range
the configuration from 8 todoes15,
LTE LST VLANMAP
the default
not take effect. priority is 1;
If the DSCP is within
the range from 16 to
23, the default priority
is 2;
If the DSCP is within
the range from 24 to
ADD VRF
BTS3900, BTS3900
LST VRF Indicates the index of
WCDMA, BTS3900 YES
MOD VRF a VRF instance.
LTE
BTS3900, BTS3900 RMV VRF
ADD VRF Indicates
Indicates the the maximum
WCDMA, BTS3900 MOD VRF description
wait time forofan a echo
VRF NO
LTE LST VRF instance.
Indicates the
response. If no echo maximum
BTS3900, BTS3900 MOD GTPU number
responseofistimeouts receivedof
Indicates
the echo whether to
response NO
LTE LST GTPU during
enable the
static period
detection
waiting
specified timer.
by this If no
BTS3900, BTS3900 MOD GTPU in compliance
echo response with
is
parameter,
GPRS Tunnelingthe timer NO
LTE LST GTPU received
has expired.
Indicates after
the the
Protocol
number for User by
specified
Differentiated
Plane (GTP-U). Services
BTS3900, BTS3900 MOD GTPU this
Code parameter
Point (DSCP)isIf this
LTE LST GTPU parameter
reached, is set to of NO
a GTP-U the
ENABLE, control
the
GTP-U
GTP-U
path in use fails.
packet.
BTS3900, BTS3900 MOD GTPU static check
Indicates theisdevice NO
LTE LST GTPU enabled.
name
Indicatesof theIn
thethis
ALD, case,
antenna
ADD RET the ALM-25886 IP of
BTS3900, BTS3900 type. This
which parameter
identifies
connection scenariothe
MOD RET Path Fault
WCDMA, BTS3900
MOD RETTILT ALD.
the is to Thisis
can antenna.
beIt set alarm NO
LTE reported
Indicates
SINGLE_RET
recommended
parameter ifthe
a
mustlinkor
that
be you
set
BTS3900, BTS3900 LST
ADDRET
RET bearing
polarization an IP path of is
MULTI_RET.
set
basedtheon thetype
device name
hardware the
in
WCDMA, BTS3900 MOD RET faulty.
antenna.
the If this
following
installation. This parameter
format:
The NO
LTE LST RET is set tocode
parameter
sector_device
vendor DISABLE,
can and the
beserial
set
BTS3900, BTS3900 ADD RET GTP-U static check
to SINGLE
type_network
number of the type.or deviceis
DUAL.
WCDMA, BTS3900 MOD RET disabled.
The NO
mustmeanings
be correctly of the
LTE LST RET parts are as
BTS3900, BTS3900 ADD configured infollows:
a non-
ADD RET
RET Indicates
Sector:
the
indicates
number
WCDMA, BTS3900 MOD RET
DLD ALDSW
regular scenario.
of configured RETtheThis NO
LTE LST RET number
parameter
Indicates
subunits. of the
can
the sector.
be
device set
DSP ALDVER Device type:
BTS3900, BTS3900 to REGULAR,
number of theindicates
ALD.
DSP RET the type
DAISY_CHAIN, of currently
WCDMA, BTS3900 The device number of YES
LST RET connected device.
LTE ADD SECTOR_SPLITTING,
the ALD must be It
BTS3900, BTS3900 ADD RET
MOD RET
RET can
or be SINGLE_RET
2G_EXTENSION.
unique.
MOD RET
RMV ALDSW
DLD RET
WCDMA, BTS3900 (Single-antenna NO
DSP ALDVER
RST RETCFGDATA
DLD ALD
LTE Remote
IndicatesElectrical
the cabinet Tilt
BTS3900, BTS3900 LST
DSP RET
ADD RET
ALDVER Unit), MULTI_RET
number of the RRU or
WCDMA, BTS3900 DLD ALDSW
MOD RET (Multi-antenna Remote NO
DLD RFU that controls the
LTE RST RETCFGDATA
ALD Electrical
Indicates Tilt
the Unit),
subrack
BTS3900, BTS3900 ADD
DSP RET ALD.
SCN ALDVER
ALD TMA (Tower-mounted
number of the RRU or
WCDMA, BTS3900 DLD
MOD ALDSW
RET
DSP RET NO
DLD RETCFGDATA Amplifier),
RFU or RAE the
that controls
LTE RST ALD
LST RET Indicates
(Remote the slot
eAntenna
BTS3900, BTS3900 DSP ALD.
SCN ALDVER
ALD number
Extension). of the RRU or
Network
WCDMA, BTS3900 MOD RET
DSP RET NO
RFU
type: that
indicatescontrols the
whether
LTE RST ALD
LST RET
BTS3900, BTS3900 ADD ALD.
the current ALD is
SCN RET
ALD Indicates
WCDMA, BTS3900 MOD RET
DSP RET used for athe 2Gvendor
network NO
Indicates
code. the
or 3G/LTE network. serial
LTE LST RET
LST RET number of the ALD.
BTS3900, BTS3900 ADD RET The device name is
The
optional, but the and
vendor code
WCDMA, BTS3900 MOD
DSP RET NO
the serial
device name number
LTE LST RET
RETDEVICEDATA
BTS3900, BTS3900 uniquely
configured identify
fordevice
eachan
LST Indicates the
ALD.
WCDMA, BTS3900 ALD must YES
DSP
RETDEVICEDATA number of betheunique.
RET.
LTE RETDEVICEDATA
BTS3900, BTS3900 MOD Indicates the number
LST
RETDEVICEDATA
WCDMA, BTS3900 MOD of the RET subunit, YES
RETDEVICEDATA
LTE RETDEVICEDATA which starts from 1.
BTS3900, BTS3900 MOD
DSP
RETDEVICEDATA Indicates the antenna
WCDMA, BTS3900 Indicates NO
MOD
RETDEVICEDATA azimuth. the base
LTE RETDEVICEDATA station ID. AISG1.1-
BTS3900, BTS3900 LST Indicates theantennas
model of
DSP
RETDEVICEDATA based RET
WCDMA, BTS3900 MOD the RET antenna
support a maximum NO
RETDEVICEDATA
LTE RETDEVICEDATA module.
length of 12 characters
BTS3900, BTS3900 LST
DSP
RETDEVICEDATA for the base station ID.
WCDMA, BTS3900 NO
RETDEVICEDATA If the input base
LTE
LST station ID has more
RETDEVICEDATA than 12 characters,
only the first 12
characters are saved
on the RET antenna.
Indicates the
beamwidth of band 1.
Beamwidth is used to
MOD Indicates the capability
BTS3900, BTS3900 describe the
RETDEVICEDATA beamwidth of band
WCDMA, BTS3900 of the antenna to 2. NO
LST Beamwidth
LTE MOD transmit RF issignals.
used toIt
BTS3900, BTS3900 RETDEVICEDATA Indicates
describe theto
the capability
RETDEVICEDATA is also used
WCDMA, BTS3900 beamwidth
of the of
antenna band
to 3.
measure the antenna NO
LST Beamwidth is used toIt
LTE MOD transmit
pattern. RF signals.
BTS3900, BTS3900 RETDEVICEDATA Indicates
describe the
the capability
RETDEVICEDATA is also used to
WCDMA, BTS3900 beamwidth
of theofantenna
the antenna
measure band
to 4. NO
LST Beamwidth
LTE MOD
RETDEVICEDATA pattern. RF issignals.
transmit used toIt
BTS3900, BTS3900 describe the to
is also used capability
RETDEVICEDATA
WCDMA, BTS3900 of the antenna
measure to
the antenna NO
LST
LTE MOD transmit
pattern. RF signals. It
BTS3900, BTS3900 RETDEVICEDATA
RETDEVICEDATA is also used
Indicates thetogain of
WCDMA, BTS3900 measure NO
LST band 1. the antenna
LTE MOD pattern.
BTS3900, BTS3900 RETDEVICEDATA
RETDEVICEDATA Indicates the gain of
WCDMA, BTS3900 NO
LST band 2.
LTE MOD
BTS3900, BTS3900 RETDEVICEDATA
RETDEVICEDATA Indicates the gain of
WCDMA, BTS3900 NO
LST band 3.
LTE MOD
BTS3900, BTS3900 RETDEVICEDATA
RETDEVICEDATA Indicates the gain of
WCDMA, BTS3900 MOD NO
LST band 4.
LTE RETDEVICEDATA
BTS3900, BTS3900 RETDEVICEDATA Indicates the date
DSP
WCDMA, BTS3900 MOD when the antenna is NO
RETDEVICEDATA
LTE RETDEVICEDATA installed.
BTS3900, BTS3900 LST Indicates the
DSP
RETDEVICEDATA
WCDMA, BTS3900 MOD mechanical tilt of the NO
RETDEVICEDATA
LTE RETDEVICEDATA installation.
Indicates the ID of the
BTS3900, BTS3900 LST
DSP
RETDEVICEDATA installation technician
WCDMA, BTS3900 NO
RETDEVICEDATA who installed the
LTE MOD
BTS3900, BTS3900 LST antenna.
Indicates band 1
RETDEVICEDATA
RETDEVICEDATA
WCDMA, BTS3900 supported by the NO
LST
LTE MOD antenna.
BTS3900, BTS3900 RETDEVICEDATA Indicates band 2
RETDEVICEDATA
WCDMA, BTS3900 supported by the NO
LST
LTE MOD antenna.
BTS3900, BTS3900 RETDEVICEDATA Indicates band 3
RETDEVICEDATA
WCDMA, BTS3900 supported by the NO
LST Indicates
LTE MOD antenna. the sector ID.
BTS3900, BTS3900 RETDEVICEDATA AISG1.1-based
Indicates band 4RET
RETDEVICEDATA antennas
WCDMA, BTS3900 MOD supportedsupport
by the a NO
LST maximum
LTE RETDEVICEDATA antenna. sector ID
BTS3900, BTS3900 RETDEVICEDATA length of 4 characters.
DSP
WCDMA, BTS3900 MOD If the input sector ID NO
RETDEVICEDATA
LTE RETDEVICEDATA has more than 4
BTS3900, BTS3900 LST Indicates theonly
serial
DSP characters, the
WCDMA, BTS3900 RETDEVICEDATA number of the RET NO
CLB RET
RETDEVICEDATA first 4 characters are
LTE DLD antenna
saved onmodule.
the RET
BTS3900, BTS3900 LST RETCFGDATA
DSP RETSUBUNIT
RETDEVICEDATA antenna.
Indicates the device
WCDMA, BTS3900 YES
LST RETSUBUNIT
CLB RET number of the RET.
LTE
BTS3900, BTS3900 MOD RETSUBUNIT
DLD RETCFGDATA Indicates the number
WCDMA, BTS3900 MOD RETTILT
DSP RETSUBUNIT of the RET subunit, YES
Indicates the antenna
LTE LST RETSUBUNIT which starts
tilt of the RET from 1.
subunit.
BTS3900, BTS3900 MOD
MOD RETSUBUNIT
RETSUBUNIT If this parameter
Indicates the name is set
of
WCDMA, BTS3900 MOD RETTILT NO
to
the32767, it is invalid
RET subunit.The
LTE LST RETSUBUNIT
BTS3900, BTS3900 MOD RETSUBUNIT and
name theofactual
the RET tilt is not
WCDMA, BTS3900 MOD RETTILT changed.
subunit
Indicatesis the
optional,
devicebut NO
LTE LST RETSUBUNIT the name
number ofconfigured
the VRET
BTS3900, BTS3900 for each RETdevice subunit
LST VRET antenna.The
WCDMA, BTS3900 must be unique. YES
MOD VRET number of the VRET
LTE
antenna must be
unique.
Indicates the device
name of the VRET
BTS3900, BTS3900 antenna.The device
MOD VRET
WCDMA, BTS3900 name is optional, but NO
LST VRET
LTE the devicethe
Indicates name cabinet
BTS3900, BTS3900 configured for each
number of the AARU
WCDMA, BTS3900 None ALD must be unique. NO
where
Indicates thethe VRET number
LTE
BTS3900, BTS3900 MOD VRETSUBUNIT subunit
of the first is located.
virtual
WCDMA, BTS3900 DSP VRETSUBUNIT antenna port to which NO
LTE LST VRETSUBUNIT Indicates
the VRETthe subunitnumber is
BTS3900, BTS3900 MOD VRETSUBUNIT ofconnected. virtual
the second
WCDMA, BTS3900 DSP VRETSUBUNIT Indicates
antenna port the to namewhich of NO
LTE LST VRETSUBUNIT the VRET
the VRET subunit is subunit.The
BTS3900, BTS3900 name
connected. of the theVRET
MOD VRETSUBUNIT Indicates device
WCDMA, BTS3900 subunit
number ofoptional,
is the VRET but NO
LST VRETSUBUNIT
LTE the namewhere
antenna configured the
BTS3900, BTS3900 DSP VRETSUBUNIT for each VRET subunit
VRET subunit is
WCDMA, BTS3900 LST VRETSUBUNIT must be unique. YES
contained.The device
LTE MOD VRETSUBUNIT Indicates the slot
BTS3900, BTS3900 number of the VRET
number
antenna of must the be AARU
WCDMA, BTS3900 None NO
where
unique.the VRET
LTE Indicates
BTS3900, BTS3900 subunit is the subrack
located.
number of the AARU
WCDMA, BTS3900 None NO
where the VRET
LTE
BTS3900, BTS3900 subunit is the
DSP VRETSUBUNIT Indicates located.
number
WCDMA, BTS3900 LST VRETSUBUNIT of the VRET subunit, YES
LTE MOD VRETSUBUNIT Indicates
which starts thefrom number 1.
BTS3900, BTS3900 MOD VRETSUBUNIT of the third virtual
WCDMA, BTS3900 DSP VRETSUBUNIT Indicates
antenna port the to downlink
which NO
LTE LST VRETSUBUNIT tilt
the ofVRET
the VRET subunit is
MOD RETTILT
BTS3900, BTS3900 subunit.
Indicates
connected. Ifthe
thistype of
MOD VRETSUBUNIT
WCDMA, BTS3900 parameter isprotocol,
set to tilt NO
DSP VRETSUBUNIT the IP clock
Indicates the uplink
LTE MOD RETTILT 32767,
which it
can is
of the VRET subunit. be invalid
PTP and
or If
BTS3900, BTS3900 LST VRETSUBUNIT
the
Huawei actual tilt
proprietary
MOD VRETSUBUNIT this parameter is set to is not
WCDMA, BTS3900 NO
DSP VRETSUBUNIT changed.
protocol.
32767,
Indicates it PTP
is
the
includes
invalid
number and
LTE IEEE1588 V2,is
BTS3900, BTS3900 LST VRETSUBUNIT
MOD VRETSUBUNIT ofthe actual
the fourth tilt not
G.8265.1 andvirtual
WCDMA, BTS3900 DSP VRETSUBUNIT changed.
antenna
1588V2_16.1.to which
port NO
LTE LST VRETSUBUNIT the VRETthe
Indicates
IEEE1588 subunit
V2,number is
defined
BTS3900, BTS3900 ADD IPCLKLINK connected.
of ports that can be
WCDMA, BTS3900 MOD VRETSUBUNIT by the IEEE, supports
DSP IPCLKLINK NO
added
both timeto a VRET
LTE DSP PRICLASS
BTS3900, BTS3900 subunit.
synchronization and
RMV IPCLKLINK Indicates
frequencythe number
WCDMA, BTS3900 YES
SET CLASSIDENTIFY of the IP clock link.
synchronization.
LTE
BTS3900, BTS3900 SET PRICLASS G.8265.1 supports
ADD IPCLKLINK
LST IPCLKLINK
WCDMA, BTS3900 frequency NO
LST
LST IPCLKLINK
PRICLASS
LTE synchronization
Indicates the number only.
BTS3900, BTS3900 1588 V2_16.1
ADD IPCLKLINK of the cabinet where
WCDMA, BTS3900 supports both time NO
LST IPCLKLINK the IP clock link is
LTE synchronization
Indicates the number and
BTS3900, BTS3900 configured.
ADD IPCLKLINK frequency
of the subrack where
WCDMA, BTS3900 synchronization. NO
LST IPCLKLINK the IP clock link is
LTE Huawei
BTS3900, BTS3900 Indicatesproprietary
configured. the number
ADD IPCLKLINK protocol,
WCDMA, BTS3900 of the slotwhich whereisthe theIP NO
LST IPCLKLINK Huawei-defined IP
LTE clock link is configured.
BTS3900, BTS3900 ADD IPCLKLINK clock
Indicates protocol,
the client applies
WCDMA, BTS3900 DSP IPCLKLINK to the interconnection
IPv4 address of the IP NO
LTE LST IPCLKLINK between
clock link.Huawei
BTS3900, BTS3900 equipmentthe
Indicates and server
ADD IPCLKLINK Indicates
supports the domain
frequency
WCDMA, BTS3900 IPv4 address of the IP NO
LST IPCLKLINK to which
LTE clock link.the IP clock
synchronization only.
BTS3900, BTS3900 link belongs. The
ADD IPCLKLINK
WCDMA, BTS3900 setting of this NO
LST IPCLKLINK
LTE parameter must be the
same as the setting of
the clock server.
Union (ITU) for
frequency
synchronization of an
IEEE
Indicates1588 theV2-
compliant
demodulationclock
IP modelink of
with the
Indicates networking
the
an uplink baseband
type of UNICAST.
networking
signaling type forAn
processing the
BTS3900, BTS3900 IP clock link in
ADD IPCLKLINK IP clock. The
equipment for UMTS. LTE
WCDMA, BTS3900 compliant with ITU-T NO
LST IPCLKLINK currently
For a newly does not
added
LTE G.8265.1 supports
BTS3900, BTS3900 supportbaseband
uplink L3 Multicast
ADD IPCLKLINK interconnection
function.
signaling processing with
WCDMA, BTS3900 NO
LST IPCLKLINK
ADD BASEBANDEQM servers from other
LTE board, the
BTS3900, BTS3900 LST BASEBANDEQM vendors.
Indicates An
theIP clock
number
demodulation mode
WCDMA, BTS3900 MOD link in
of thebe compliant
baseband with YES
must specified.
LTE ADD BASEBANDEQM
BASEBANDEQM IEEE 1588
equipment.
Different V2
sets of uplink
BTS3900, BTS3900 LST BASEBANDEQM
RMV BASEBANDEQM supports
baseband signaling
Indicates
interconnectionthe type of
with
WCDMA, BTS3900 MOD processing board can YES
baseband
servers from equipment.
other
LTE BASEBANDEQM have different
BTS3900, BTS3900 RMV BASEBANDEQM
BASEBANDEQM vendors only inmodes.
L2 or
ADD demodulation
WCDMA, BTS3900 L3 multicast NO
LST BASEBANDEQM This parameter is not
LTE networking.
Indicates theGSM
number
BTS3900, BTS3900 used for the
IEEE1588V2_16.1
mode, and thereforecan
of a cabinet that it
WCDMA, BTS3900 LST BASEBANDEQM also be used for that YES
houses a baseband
is recommended
LTE interconnection
Indicates the with
number
BTS3900, BTS3900 processing
this parameter unit.be set
servers
of from
to NULL for the GSMa
a slot that other
houses
WCDMA, BTS3900 LST BASEBANDEQM vendors when the YES
baseband
mode. This processing
LTE Indicates
other
unit. theparameter
vendors number
do not
BTS3900, BTS3900 cannot be setthatto NULL
of a subrack
support ITU-T
WCDMA, BTS3900 LST BASEBANDEQM for the UMTS mode. YES
ADD SECTOR houses
G.8265.1.Thea baseband
LTE This parameter is not
BTS3900, BTS3900 DSP SECTOR processing
contentS of unit.
used for
Indicates the LTE
the number
WCDMA, BTS3900 LST SECTOR IEEE1588V2_16.1
mode, and therefore it YES
of the
refers sector.
to the optional
LTE MOD SECTOR is recommended that
BTS3900, BTS3900 ADD
RMV SECTOR
SECTOR section 16.1 of be set
this parameter
Indicates the name of
user-
WCDMA, BTS3900 MOD SECTOR IEEE1588V2
to protocol. NO
theNULL
sector.
defined for the
information LTEof
LTE LST SECTOR mode.
BTS3900, BTS3900 ADD SECTOR a sector. The
Indicates value of
the location
WCDMA, BTS3900 MOD SECTOR this
name parameter
of the base consists NO
LTE LST SECTOR of xx::yy and common
station.
BTS3900, BTS3900 ADD SECTOR character strings,
WCDMA, BTS3900 MOD SECTOR which are separated NO
LTE LST SECTOR by percentage signs
BTS3900, BTS3900 Indicates the channel
(%), for example,
DSP SECTOR
WCDMA, BTS3900 number of a sector
%tel::88888888%owne YES
LST SECTOR
LTE antenna on
theancabinet
r::huawei%20130101.
Indicates RRU.
BTS3900, BTS3900 xx::yy indicates that to
DSP SECTOR number of the RRU
WCDMA, BTS3900 the value of xx is yy. YES
LST SECTOR which a sector
LTE Indicates
BTS3900, BTS3900 antenna isthe slot
connected.
DSP SECTOR number of the RRU to
WCDMA, BTS3900 YES
LST SECTOR which a sector
LTE Indicates
BTS3900, BTS3900 antenna isthe subrack
connected.
DSP SECTOR number of the RRU to
WCDMA, BTS3900 YES
LST
ADDSECTOR
SECTOREQM which a sector
LTE
BTS3900, BTS3900 LST SECTOREQM antenna isthe
Indicates connected.
number
WCDMA, BTS3900 MOD SECTOREQM of the sector YES
LTE RMV SECTOREQM equipment.
Indicates the number
BTS3900, BTS3900 LST
ADDSECTOR
SECTOREQM of the sector in which
WCDMA, BTS3900 NO
LST SECTOREQM the sector equipment
LTE Indicates
BTS3900, BTS3900 is located.the channel
number of a sector
WCDMA, BTS3900 LST SECTOREQM YES
equipment
Indicates the antenna
cabineton
LTE
BTS3900, BTS3900 an RRU.
number of the RRU to
WCDMA, BTS3900 LST SECTOREQM which a sector YES
LTE equipment antenna is
BTS3900, BTS3900 connected.
Indicates the RX/TX
WCDMA, BTS3900 LST SECTOREQM YES
mode
Indicates theantenna.
of the slot
LTE
BTS3900, BTS3900 number of the RRU to
WCDMA, BTS3900 LST SECTOREQM which a sector YES
LTE equipment antenna is
connected.
Indicates the subrack
BTS3900, BTS3900 number of the RRU to
WCDMA, BTS3900 LST SECTOREQM which a sector YES
LTE equipment antenna is
BTS3900, BTS3900 Indicates
connected.whether a TX
WCDMA, BTS3900 LST SECTOREQM antenna works in YES
LTE master or slave mode.
BTS3900, BTS3900 ADD LOCATION
Indicates the address
WCDMA, BTS3900 MOD LOCATION NO
of the base station.
LTE LST LOCATION
BTS3900, BTS3900 ADD LOCATION
Indicates the altitude
WCDMA, BTS3900 MOD LOCATION NO
of the base station.
LTE LST LOCATION
BTS3900, BTS3900 ADD LOCATION Indicates the city
WCDMA, BTS3900 MOD LOCATION where
Indicatesthethe
base station NO
LTE LST LOCATION is located. related to
addresses
BTS3900, BTS3900 ADD LOCATION
this base station or
WCDMA, BTS3900 MOD LOCATION NO
telephone numbers of
LTE LST LOCATION
BTS3900, BTS3900 ADD LOCATION the personnel
Indicates relatedof
the format
WCDMA, BTS3900 MOD LOCATION to this base
geographical station. NO
LTE LST LOCATION coordinates.
Indicates the latitude
BTS3900, BTS3900 ADD LOCATION
of the base station. A
WCDMA, BTS3900 MOD LOCATION NO
negative value
LTE LST LOCATION Indicates the south.
latitude
BTS3900, BTS3900 ADD LOCATION indicates the
of the base station in
WCDMA, BTS3900 MOD LOCATION NO
the WGS-84
LTE LST LOCATION
BTS3900, BTS3900 ADD LOCATION coordinate system.
Indicates the location
WCDMA, BTS3900 MOD LOCATION NO
ID of the base station.
LTE LST
ADDLOCATION
LOCATION
BTS3900, BTS3900 Indicates the location
LST LOCATION
WCDMA, BTS3900 name of the base YES
MOD LOCATION
LTE station.
Indicates the longitude
BTS3900, BTS3900 RMV LOCATION
ADD LOCATION
of the base station. A
WCDMA, BTS3900 MOD LOCATION NO
negative value
LTE LST LOCATION Indicates the west.
longitude
BTS3900, BTS3900 ADD LOCATION indicates the
of the base station in
WCDMA, BTS3900 MOD LOCATION NO
the WGS-84
LTE LST LOCATION
BTS3900, BTS3900 ADD LOCATION coordinate
Indicates the system.
site that
WCDMA, BTS3900 MOD LOCATION the base station NO
LTE LST LOCATION belongs to.
BTS3900, BTS3900 ADD LOCATION
Indicates the range of
WCDMA, BTS3900 MOD LOCATION NO
the base location.
LTE LST LOCATION
BTS3900, BTS3900 ADD LOCATION Indicates the block
WCDMA, BTS3900 MOD LOCATION where the base station NO
LTE LST LOCATION Indicates
is located.the
BTS3900, BTS3900 ADD LOCATION telephone number of
WCDMA, BTS3900 MOD LOCATION the maintenance NO
LTE LST LOCATION personnel of the base
BTS3900, BTS3900 ADD LOCATION Indicates
station. the user-
WCDMA, BTS3900 MOD LOCATION defined information of NO
LTE LST LOCATION the location.
Indicates the
BTS3900, BTS3900 ADD LOCATION
positioning accuracy of
WCDMA, BTS3900 MOD LOCATION NO
the the base station's
LTE LST LOCATION
BTS3900, BTS3900 geographical location.
SET NE Indicates the location
WCDMA, BTS3900 NO
LST NE of the base station.
LTE
BTS3900, BTS3900 Indicates the user-
SET NE
WCDMA, BTS3900 defined information of NO
LST NE
LTE the NE.
BTS3900, BTS3900 Indicates the product
WCDMA, BTS3900 LST NE software version of the NO
LTE base station.
Indicates the
deployment identifier
that specifies the site
BTS3900, BTS3900 of the NE. When
SET NE
WCDMA, BTS3900 multiple
IndicatesNEs
the are
site NO
LST NE
LTE deployed
name. When at the same
multiple
BTS3900, BTS3900 site, these NEs have
SET NE NEs are at the same
WCDMA, BTS3900 the NO
LST NE site,same
thesedeployment
NEs are
LTE identifier. with the
BTS3900, BTS3900 configured
SET NE Indicates
same sitethe NE
name.
WCDMA, BTS3900 NO
LST NE name.
LTE
BTS3900, BTS3900
Indicates the type of
WCDMA, BTS3900 LST NODE NO
an NE. the working
Indicates
LTE
BTS3900, BTS3900 mode
Indicates of athebase user-
WCDMA, BTS3900 LST NODE station. The
defined information value ofof NO
LTE this
a node.parameter
Indicates can
the priorities
BTS3900, BTS3900 only be
Indicates Non-
the
of E-UTRAN TDD and priorities
WCDMA, BTS3900 LST
LST NODE ConCurrent
of E-UTRAN
E-UTRAN FDD.when
TDD Tothe
and NO
LTE CNOPERATORHOCF product
prioritize E-UTRAN NE
E-UTRAN type FDD. of the
To
BTS3900, BTS3900 G is notor
prioritize
Indicates
TDD DBS3900,
E-UTRAN
the ID of the
E-UTRAN
MOD BTS3900,
TDD and BTS3900A,
E-UTRAN YES
LTE MOD operator.
FDD,
Indicates set this
theorbearer
CNOPERATORHOCF
CNOPERATORHOCF BTS3900L,
FDD,
parameter set this
to on
BTS3900, BTS3900 G policy
BTS3900AL.
parameter based to or
G
ADD EUTRAN_TDD
service handovers. NO
LTE MOD
LST EUTRAN_TDD or
CNOPERATORSPIDC EUTRAN_FDD.
If the If the
CNOPERATORHOCF
CNOPERATORHOCF EUTRAN_FDD. To
FG FirstRatPri parameter
ServiceBasedInterFreq
BTS3900, BTS3900 G
G treat E-UTRAN TDD
ADD
LST is set
HoSwitch, to EUTRAN, the NO
LTE LST Indicates
and E-UTRAN the FDD
CNOPERATORSPIDC
CNOPERATORSPIDC SecondRatPri
UtranServiceHoSwitch,
CNOPERATORHOCF dedicated
equally,
This setSPID
parameter this for an
BTS3900, BTS3900 FG
FG parameter must
GeranServiceHoSwitc be set
G operator.Operators
parameter
indicates
Indicates theto ID
whether to of the YES
LTE LST
MOD to
h, NULL, indicating
can
thatadefine
EUTRAN.
operator.
set the TDD
RAT/frequency
E-UTRAN
CNOPERATORSPIDC
CNOPERATORSPIDC
ADD CdmaHrpdServiceHoS
RatFreqPriorityGroupI
priority.
and If this FDD
E-UTRAN
BTS3900, BTS3900 FG
FG
CNOPERATORSPIDC witch,
d MO
parameter
are notcorresponding
is set to to
prioritized. YES
LTE MOD
RMV
FG Cdma1xRttServiceHoS
the
CFG,
Note dedicated
UEs
that SPID.
CNOPERATORSPIDC
ADD
CNOPERATORSPIDC
MOD witch,
Each or the value
operator can be
BTS3900, BTS3900 FG
CNOPERATORSPIDC
FG preferentially
EUTRAN will camp
ServiceReqInterFreqH be on
CNOPERATORSPIDC configured with a NO
LTE RMV
FG the
removed
oSwitchRAT or
in
check frequency.
later box is
FG maximum
Indicates of 256
the QoS
CNOPERATORSPIDC
MOD If this parameter
versions.
Indicates
selected, the
and ID
a UE is aset
of
BTS3900, BTS3900 LST dedicated
Class SPIDs.
Identifier (QCI)
FG
CNOPERATORSPIDC to NOT_CFG,
RAT/frequency
fails to be handed UEs do
priority
over NO
LTE CNOPERATORSPIDC
LST of an EPS bearer.
FG not
group.
to preferentially
the target eNodeB, camp
FG
CNOPERATORSTAN Different QCIs
LST on
the the RAT
source or
eNodeB
BTS3900, BTS3900 DARDQCI Indicates
represent
frequency. the index of
different
CNOPERATORSPIDC
LST reads the YES
LTE MOD the
QoS operator.
specifications
FG
CNOPERATORSTAN
CNOPERATORSTAN ServiceHoBearerPolicy
such
valueas of the
the packet
UE
BTS3900, BTS3900 DARDQCI
DARDQCI
MOD delay budget, packet YES
LTE MOD bearers with each QCI.
CNOPERATORSTAN error
If the loss
Indicatesvalue rate,
the is IDand of the
CNOPERATORSTAN
BTS3900, BTS3900 DARDQCI resource
service-based (whether
type
SERVICE_HO_QCI_B inter-
DARDQCI NO
LTE MOD
LST the
RATservice
handover
EAR_NOT_ALLOWED is a policy
GBR
CNOPERATORSTAN
CNOPERATORSTAN service
Indicates
,group. or not).
the
remove the bearer ID For
of the
BTS3900, BTS3900 DARDQCI
DARDQCI details, see
service-based Table
with the corresponding inter-
MOD 6.1.7 NO
LTE LST QCI. in 3GPP
frequency handoverTS
CNOPERATORSTAN
CNOPERATORSTAN 23.203.
policy
Indicates group.
whether
If the
BTS3900, BTS3900 DARDQCI
DARDQCI allocation/retention
MOD ServiceBasedInterFreq NO
LTE LST priorities
CSFALLBACKPOLICY HoSwitch,(ARPs) can
CNOPERATORSTAN be configured for
BTS3900, BTS3900 CFG UtranServiceHoSwitch,
DARDQCI CSFB services NO
LTE ADD
LST GeranServiceHoSwitc
INTERPLMNHOLIST triggered
h, by common
CSFALLBACKPOLICY
BTS3900, BTS3900 LST calls. For
Indicates the details
CdmaHrpdServiceHoS index about
of
CFG YES
LTE ADD
INTERPLMNHOLIST ARPs,
witch,
the see 3GPP TS
operator.
INTERPLMNHOLIST
RMV 23.401.
Cdma1xRttServiceHoS
Indicates the mobile
BTS3900, BTS3900 LST witch,
INTERPLMNHOLIST
ADD countryorcode of the YES
LTE INTERPLMNHOLIST ServiceReqInterFreqH
INTERPLMNHOLIST target PLMN.
RMV oSwitch
Indicatescheck the mobile box is
BTS3900, BTS3900 LST
INTERPLMNHOLIST selected,
network code ofUE
and a the YES
LTE INTERPLMNHOLIST hand-inPLMN.process is
target
RMV triggered, the target
INTERPLMNHOLIST eNodeB reads the
ServiceHoBearerPolicy
value of the UE
bearers with each QCI.
If this parameter is set
to
ADD
RATFREQPRIORITYG
ROUP
ADD
LST
RATFREQPRIORITYG
RATFREQPRIORITYG
ROUP Indicates the ID of the
BTS3900, BTS3900 ROUP Indicates the downlink
ADD
LST RAT/frequency priority YES
LTE MOD frequency. In
RATFREQPRIORITYG
RATFREQPRIORITYG group.
Indicates
RATFREQPRIORITYG
ROUP Indicates the
CDMA2000, the thispriority
Radio of
BTS3900, BTS3900 ROUP
ROUP the intra-RAT
parameter indicates
LST Access Technology YES
LTE MOD
RMV frequency
the bandclass. bandBefore or
RATFREQPRIORITYG (RAT).
ADD
RATFREQPRIORITYG frequency.
configuring The value 0
a priority
BTS3900, BTS3900 ROUP
ROUP
RATFREQPRIORITYG
ROUP indicates the lowest
for a frequency YES
LTE MOD
RMV
ROUP priority.
specifiedThe by value
this of
RATFREQPRIORITYG
ADD
RATFREQPRIORITYG
MOD this parameter mustthat be
BTS3900, BTS3900 parameter, ensure
ROUP
RATFREQPRIORITYG
ROUP
RATFREQPRIORITYG
ADD determined together NO
LTE an external or local cell
RMV
ROUP
ROUP with the priorities
SERVICEIFDLEARFC operating on this of
RATFREQPRIORITYG
MOD
LST
NGRP other frequencies
BTS3900, BTS3900 frequency
Indicates thehasGERAN been
ROUP
RATFREQPRIORITYG
ADD
RATFREQPRIORITYG
LST during the band.network NO
LTE configured.
frequency
ROUP
SERVICEIFDLEARFC
ROUP
SERVICEIFDLEARFC planning. Cell
BTS3900, BTS3900 LST
NGRP
NGRP reselection
Indicates the priorities
ID of the in
ADD
RATFREQPRIORITYG
LST different RATs cannot YES
LTE MOD operator.
SERVICEIFDLEARFC
ROUP
SERVICEIFDLEARFC
SERVICEIFDLEARFC Indicates
be the same. the ID of the
BTS3900, BTS3900 NGRP
NGRP
NGRP service-based
Indicates a DL inter-
LST YES
LTE MOD
RMV frequency
EARFCN
Indicates the handover
for service-
index of
SERVICEIFDLEARFC
SERVICEIFDLEARFC
ADD
SERVICEIFDLEARFC policy
based
Indicates group.
inter-frequency
the
a DL EARFCN in a DL
BTS3900, BTS3900 NGRP
NGRP
SERVICEIFDLEARFC
NGRP handover.
hysteresis Only
for service-the
ADD EARFCN group for YES
LTE MOD
RMV
NGRP value
based with
inter-frequency
SERVICEIFHOCFGG service-based inter-
SERVICEIFDLEARFC
SERVICEIFDLEARFC
MOD Indicates A4. the
DlEarfcnIndex
event service-
0 in the
BTS3900, BTS3900 ROUP frequency handover.
NGRP
NGRP
SERVICEIFDLEARFC
ADD based
DL EARFCN
When inter-frequency
the UEgroup detects is NO
LTE LST
RMV A4 measurement
NGRP
SERVICEIFHOCFGG
SERVICEIFHOCFGG valid
that for signal
the LTE FDD quality
SERVICEIFDLEARFC
LST report
cells.
in the Allwaiting
servingvalues timer.
cell of If
this
BTS3900, BTS3900 ROUP
ROUP
NGRP Indicates
the the ID
inter-frequency ofand the
SERVICEIFDLEARFC
LST Indicates
parameter
that in at leastthe mode
are one valid of YES
LTE MOD operator.
measurement is of
NGRP
SERVICEIFHOCFGG a
andservice-based
have the
inter-frequency
Indicates the ID same inter-
the
SERVICEIFHOCFGG
ADD triggered due to
BTS3900, BTS3900 ROUP RAT
priorityhandover
Indicates
neighboring for whether
service-based inter- LTE cell TDD
meet UEs
ROUP
SERVICEIFHOCFGG service- orhandover
service YES
LTE MOD measurement.
of an
cells.
the operator
entering
frequency inWhen
condition this
RMV
ROUP request-based
SERVICEIFHOCFGG
ADD
SERVICEIFHOCFGG
MOD
conditions
policy
for group
group.can
a service-
policy for orinter- be
BTS3900, BTS3900 ROUP frequency
delivering
handed request-based
service over handover,
both to the a
SERVICEIFHOCFGG
ROUP
SERVICEIFHOCFGG NO
LTE RMV the time for
service-based
specified
handover, it adoes
frequencyUE inter- not
ROUP
ROUP
ADD
SERVICEIFHOCFGG performing
frequency
during service-based
immediately inter-
handover
send a
MOD
LST
BTS3900, BTS3900 SERVICEIFHOCFGG
ROUP frequency
and service-based
inter-frequency
measurement report to
SERVICEIFHOCFGG
ADD
SERVICEIFHOCFGG NO
LTE ROUP measurement
inter-RAT
handovers.
the eNodeB. handover must be
Instead,
ROUP
SERVICEIRHOCFGG
ROUP
MOD restricted.
measurements
the UE sends a are This report
BTS3900, BTS3900 LST
ROUP
SERVICEIFHOCFGG
ADD prevents
met, the
the eNodeB
only when theUE signal from NO
LTE SERVICEIFHOCFGG
LST
ROUP
SERVICEIRHOCFGG performing
delivers
quality therepeated
meets the
SERVICEIRHOCFGG GAP measurements
configuration for
BTS3900, BTS3900 LST
ROUP entering
Indicates condition
the not index
ROUP
SERVICEIFHOCFGG
LST when
throughoutit does
service-based the inter-of YES
LTE MOD the operator.
receive
frequency measurement
handover
ROUP
SERVICEIRHOCFGG
SERVICEIRHOCFGG
ADD hysteresis.
Indicates the ID of the
BTS3900, BTS3900 ROUP reports
measurement in
This parameter
service-based a period,
ifinter-
the
helps
ROUP
SERVICEIRHOCFGG ensuring that
following data
requirements YES
LTE MOD
RMV
ROUP decrease
RAT the
handover policy
Indicates number
SERVICEIRHOCFGG are
of met: whether
transmission
occasionally
group.
will not
ADD
MOD service-based
be affected. This inter-
BTS3900, BTS3900 ROUP InterRatHoState
triggered event are of at
SERVICEIRHOCFGG
ROUP
SERVICEIRHOCFGG RAT handovers
parameter is dedicated NO
LTE RMV least
reports, one the bearer
average of the
ROUP
ROUP required,
to LTE TDD allowed,
cells. or
SERVICEIRHOCFGG UE
numberis set to
ofwhether
handovers,
MOD
LST Indicates
not allowed for a to
QCI.
BTS3900, BTS3900 ROUP MUST_HO.
and thepriority
numberforofthe
SERVICEIRHOCFGG
SERVICEIRHOCFGG set the NO
LTE ServiceIrMeasMode
incorrect handovers, is
ROUP
ROUP
ADD SPIDCFG intra-RAT frequency
set to
preventing
Indicates the
BTS3900, BTS3900 LST
LST SPIDCFG group. If this
SERVIC_IR_MEAS_
unnecessary
subscriber profile ID YES
SERVICEIRHOCFGG parameter is set
LTE MOD SPIDCFG ORDER.
handovers.
(SPID). After theto
ROUP
RMV SPIDCFG CFG(CFG), UEs select
ADD SPIDCFG service-based
This parameter inter-
is
BTS3900, BTS3900 the target
frequency to frequency
handover
MOD SPIDCFG dedicated NO
LTE based
Indicates
measurement theLTE
on whether priority
times
TDD
to
LST SPIDCFG cells.
ADD SPIDCFG setting.
enable
out, theor
Indicates IfeNodeB
this
disable
the ID ofinter- the
BTS3900, BTS3900 parameter
frequency is set to
load
MOD SPIDCFG intra-RAT
delivers the frequency NO
LTE NOT_CFG(NOT_CFG)
balancing for forthe
LST SPIDCFG priority
configurationgroup.
ADD SPIDCFG ,service-based
UEs do
SPID. Thenot select
values inter-the
BTS3900, BTS3900 target frequency
MOD SPIDCFG TRUE or FALSE based
RAT handover NO
LTE on the priority setting.
LST SPIDCFG indicate
measurement. that inter- If any of
frequency
the preceding load
balancing
requirements is allowed
are notor
prohibited
met, the eNodeB withfor UEs
the SPID,
delivers the respectively.
configuration for
service-based inter-
Indicates the operating
mode of ROHC. In
Unidirectional Mode
(U-Mode),
Indicates whether packetstoare
sent only
enable or disable from theinter-
compressor
RAT load sharing to thefor
decompressor,
the SPID. The values and a
ADD SPIDCFG
ADD feedback
Indicates channel
the is
BTS3900, BTS3900 TRUE or FALSE
MOD SPIDCFG
ENODEBFUNCTION not
compressionmandatory. profile NO
LTE indicate
Indicatesthat the inter-RAT
name is of
LST
MOD SPIDCFG Therefore,
supported U-Mode
by
loadeNodeB
an sharing isthe
function, allowed
BTS3900, BTS3900 ENODEBFUNCTION less
Indicates
eNodeB. reliable the than
eNodeB
or
which prohibited
uniquely for UEs YES
LTE ADD
RMV Bidirectional
ID
Under defined the in Optimistic
ROHC the
with
identifies the SPID,
the eNodeB
ENODEBFUNCTION Mode
service
framework,
respectively. (O-Mode)
protocol header and
BTS3900, BTS3900 MOD function.
Bidirectional
interface, which Reliable
LST compression NO
LTE ADD
ENODEBFUNCTION
ENODEBFUNCTION Mode
uniquely (R-Mode),
identifies but anits
algorithms vary with
ENODEBFUNCTION
LST feedback-induced
eNodeB
protocols. Profiles within a
BTS3900, BTS3900 MOD
ENODEBFUNCTION Indicates
overhead
PLMN.
define For
the user-defined
is minimum
details,
header see
Indicates whether to NO
LTE ENODEBFUNCTION remarks.
compared
3GPP
compression TS with
36.300. the
protocols
MOD
LST enable ROHC.
overhead in O-Mode
BTS3900, BTS3900 PDCPROHCPARA (such
Set this asparameter
RTP/UDP/IP to
ENODEBFUNCTION and
or R-Mode.
TCP/IP), whichIn O-are NO
LTE LST ON
Mode, if the eNodeB
the same ROHC is
MOD
PDCPROHCPARA under
expected the to support
decompressor
framework, can
forservices.
specific
BTS3900, BTS3900 PDCPROHCPARA VoIP or video
send
types of packet
Indicates feedback the CQI NO
LTE LST
MOD messages
streams.
thresholdEach forto the profile
PDCPROHCPARA
ADD
BTS3900, BTS3900 PDCPROHCPARA compressor
has a uniqueto
deactivating the indicate
identifier.
X2AUTOSETUPOPER Indicates NO
LTE LST
ATOR As definedthe
decompression
Indicates
secondary the bymobile
mobile
componentLTE failures
PDCPROHCPARA network
or
country successful
specifications,
carrier code
code
(SCC) for (MNC)
context
(MCC)
thea CA of
of
ADD
RMV
BTS3900, BTS3900 an
updates.
Indicates
an
eNodeB
UE operator
operator
basedsupports O-Mode
whether that
that
on the the the
the is
to
X2AUTOSETUPOPER
X2AUTOSETUPOPER YES
LTE target
more
enable
target
following
channel eNodeB
reliable
carrier
eNodeB profiles:
quality. than TM2 U-
ATOR
ATOR Indicates whether
supporting
Mode
management.
supporting
profile the
When and
0x0001 X2
requires
X2mode
channel self-
If this
self-
(usage: a
RMV
LST transmission is
BTS3900, BTS3900 setup
smaller
parameter
setup
Indicates
RTP/UDP/IP;
Indicates
quality belongs
amount
belongs the
forthe is set to.
fixed
type
aselected
CA to. of
to The
UEofis
X2AUTOSETUPOPER
X2AUTOSETUPOPER adaptively YES
LTE value
feedback
ON(On),
beamforming
reference:
adaptive
worse ofthan this
than
the
selection
RFC parameter
that orR-
eNodeB MIMO
3095
ATOR
ATOR between
Indicates beamforming
the local
is
Mode. a
deactivatesstring
transmission
between RFC In of
R-Mode, two
the mode orthe
BTS3900, BTS3900 LST
LST CAMGTCFG indicated
and
identity
three
reliability
secondary
configured
MIMO ofbeamforming
4815),
by
characters,
ofthewhenthiscell.
context
component
for a
profile
the
multi- It
each
X2AUTOSETUPOPER 0x0002
and
threshold
BfMIMO MIMO (usage:
in for
adaptive a
single- multi- YES
LTE MOD CAMGTCFG uniquely
of which
synchronization
carrier
antenna (SCC)identifies
must
eNodeB. is be
for a a aCA
This
ATOR UDP/IP;
antenna
codeword
switch
cell within reference:
eNodeB.
parameteran eNodeB. The set
digit
between
UE
parameter
RFC
values
transmission,in
when3095 the the
arethethe range
is
and valid
described
the RFC0
traffic of only
BTS3900, BTS3900 MOD CAMGTCFG to
Indicates minimum
to
volume
when
4815),
as
eNodeB 9.
compressor
follows: profile and
ofdeactivates
the CAthe
0x0003 UE NO
LTE LST CAMGTCFG MIMO_BF_ADAPTIVE
interval at which an
decompressor
is
(usage: small
BfMimoAdaptiveSwitch
.NO_ADAPTIVE:
the SCC
If this or
ESP/IP;the
for the CA
parameter is
channel
Ais
eNodeB
higher
quality
is set to ofattempts
than the thatSCC into any
is
BTS3900, BTS3900 MOD CAMGTCFG reference:
fixed
UE.
set
configuretobeamforming
ON a RFC
and secondarythe 3095 or
other
poor.
NO_ADAPTIVE.
and
MIMO RFC mode.
If this
transmission
4815), However,
parameter The
and NO
LTE LST CAMGTCFG If
BfMIMOthis
component parameter
adaptive
carrier the is set
because
is
values
profile
mode set to are ofdescribed
frequent
OFF(Off),
is0x0004
used.
to
switch
(SCC) 0, the
feedback,
SCC
as for eNodeB
parameter
is always
follows: a CAThat
R-Mode
(usage:
UE.
active
is is,
does set
BTS3900, BTS3900 MOD CAMGTCFG IP;
transition
not
to reference:
deactivate between RFC
the the
LST CAMGTCFG The
causes
after
TM2: actual
being the
Transmission interval
largest
activated, at NO
LTE 3843
beamforming
SCC and
for
MIMO_BF_ADAPTIVE RFC
aeNodeB
CA and
UE 4815).
CELLBFMIMOPARAC which
amount
Indicates
unless
mode an of
ais the
radiolink local
link cell
MIMO TM3 2
,based
attempts is to
always
transmission
on channel
initially
configure usedused
a
BTS3900, BTS3900 FG overhead.
ID.
failure
for
mode
quality
for It
UEs. uniquely
(RLF)
is of not
the
inter-cellcomponent is
supported.
SCC.
MOD secondary YES
LTE MOD identifies
detected
TM3:
This
handovers, a cell
on
Transmission
TxD_BF_ADAPTIVE:
parameter thewithin
and SCC.
CELLBFMIMOPARAC
CELLBFMIMOPARAC carrier
an eNodeB. (SCC) forthen a CA
mode
The
specifies
handover 3 is
transmission thealways
modes CQI are used
BTS3900, BTS3900 FG
FG UE must be larger
for
mode UEs.
threshold
adaptively changes forselected NO
LTE MOD
LST than this value.
TM7:
adaptively
deactivating
between Transmission
TM3 between
the and SCell
CELLBFMIMOPARAC
CELLBFMIMOPARAC mode
TM2
that the
TM7, and7 local
TM3 isTM7 always
and cellorTM8, used
acts or
BTS3900, BTS3900 FG
FG
MOD for
as, UEs.
between
TM3, and TM8, TM2
takes and and
effect
TM9 NO
LTE LST
CELLBFMIMOPARAC TM8:
TM8,
only when
based Transmission
depending
on the theprotocols on
CELLBFMIMOPARAC
BTS3900, BTS3900 FG mode
the 8 iscomply
protocol
CarrierMgtSwitch
that UEs always
release used
with.
FG NO
LTE LST for
with
If UEs.
parameter which
TM9 needs UEs
on to thebe
LST
CELLBFMIMOPARAC TM4:
Indicates
comply.
associated
adaptively
Indicates Transmission
the
the PCelllocal
selected,
switch isID set
for
BTS3900, BTS3900 CELLDLPCPDSCHPA
FG mode
of the 4
cell.
MIMO_BF_ADAPTIVE
to
the ON.TM9Switch
adjusting the PA is always
It uniquelycheck used
for UEs. YES
LTE MOD identifies
: The
box
through must abecell
transmission
power within a
selected.
control
MOD
CELLDLPCPDSCHPA TM9
BS.
mode
If this w/ochangesPMI: Open-
parameter
BTS3900, BTS3900 CELLDLPCPDSCHPA
on
loop
the
Indicates
adaptively
PDSCH.
transmissionthe betweenPAIfis tothisset
be
to OFF
Indicates
parameter
used when and whether
is the
PA set to DRX NO
LTE LST mode
TM2,
BfMIMO
active-time 9 is
TM3, always
and
adaptive TM7, used
MOD ON,
adjustmentthe PA is adjusted
for PDSCH
CELLDLPCPDSCHPA for
or
switch UEs.
between
measurement This
parameter TM2, is TM3,
is set
BTS3900, BTS3900 CELLDLPCPDSCHPA dynamically
power control when is the
parameter
and TM8,
to
supported
channel is the
depending
in
quality iscell NO
LTE LST disabled,
unavailable
on the DLinICIC
protocol this
releaseis
CELLDLPCPDSCHPA MIMO_BF_ADAPTIVE
that
extremely
Indicates
disabled, operates the
andgood in
local
the TDD
or bad.
ID
even
version.
with
,power
TM2
mode. whichisIf UEs
initially
this used
BTS3900, BTS3900 LST CELLDRXPARA of
TM9 the cell.
wdistribution It
PMI:is Close- uniquely is
comply.
for inter-cell
parameter setwithin to a YES
LTE MOD CELLDRXPARA identifies
used
loop for the
transmissiona cell PDSCH.
handovers,
ON,
BS. DRX active-time and then
BTS3900, BTS3900 MOD CELLDRXPARA mode
handover
measurement 9 is modes always is are used
for UEs.
adaptively in This selected NO
LTE LST CELLDRXPARA supported the cell
parameter
between
that operates TM2, is inTM3, TDD
unavailable
and
mode. TM7, If this TM2, in this TM3,
version.
and TM8, or
parameter is TM2,
set to
TM3, DRX
OFF, TM8, active-time
and TM9
based on the protocols
measurement is not
that UEs comply
supported in the cell with.
If
thatTM9 needs to
operates in TDDbe
Indicates the type of
set. The cqi-Mask
Indicates
DEFAULT(Default),
adaptive the MIMO
MIMO forIE a is
an optional
transmission
the DRX parameter
multi-antenna IE mode
eNodeB.
introduced
used
group
The during
with the
values in
are 3GPP
initial
shortest
Release
network
long DRXaccess.
described 9.cycle
as If the iscqi-
follows:
Mask
If IE
NO_ADAPTIVE: is
this is
parameter
preferentially set to
selected A set
Setup,
to
for TM2(TM2),
the
fixed MIMO the
UE. UE
If the can
the
send
MIMO
lengths CQI/PMI/RI/PTI
transmission transmission
of long mode DRXis
BTS3900, BTS3900 MOD CELLDRXPARA reports
mode
cycle for
used. used
Thatonmultiple
PUCCH
duringQCIs
is, NO
LTE LST CELLDRXPARA only
initial innetwork
Indicates
are the
transition the
same, onDuration
the
between access
fixed
the DRX
period
is
MIMOTM2.
parameter of
transmission
MIMO transmission group with
BTS3900, BTS3900 MOD CELLDRXPARA discontinuous
If this
mode parameter
configured is set
byQCI a
the highest-priority
modes is not NO
LTE LST CELLDRXPARA reception
to (DRX). If the
LST multi-antenna
is selected
supported.
Indicates for
theislocaleNodeB
the UE.
cell
cqi-Mask
ADAPTIVE(ADAPTIVE
for
The UEs.
QCI IE
This
priorities not are set,
BTS3900, BTS3900 CELLMIMOPARACFG OL_ADAPTIVE:
ID. It uniquely The
the
), theUEMIMO
parameter
defined
open-loop can
ina3GPPis send
valid
adaptive only YES
LTE MOD identifies
CQI/PMI/RI/PTI
transmission cellmode within
MOD
CELLMIMOPARACFG when
specifications.
MIMO
an eNodeB. transmission If this
BTS3900, BTS3900 CELLMIMOPARACFG reports
used
modeduring ison
MimoAdaptiveSwitch
parameter used. PUCCH
isinitial
set In to thisin is
the active
network
set period
access
to NO_ADAPTIVE.
QCIPRIORITY(QCI is of NO
LTE LST mode, UEs report
MOD
CELLMIMOPARACFG DRX.
determined
Indicates
There
priority),
RANK are
and thethe
fourby
CQIDRX the
values.
values
BTS3900, BTS3900 CELLMIMOPARACFG settings
frequency
TM2:
parameter
but of
Transmission
do not report the
selection
group PMI with
MimoAdaptiveSwitch
strategy NO
LTE LST mode
the
values 2toisofthe
highest-priority MLB
permanently
eNodeB. for QCI
MOD
CELLMIMOPARACFG and
UEs
applied
is FixedMimoMode
in idle
selected
CL_ADAPTIVE: to UEs. mode.
for the The The
UE.
BTS3900, BTS3900 CELLMIMOPARACFG parameters.
value
TM3:
If no DRX Transmission
closed-loop If the
parameter
adaptive NO
LTE LST MimoAdaptiveSwitch
RESELPRIOBASED
mode
group 3is
MIMO isconfigured
permanently
transmission for
CELLMIMOPARACFG Indicates
parameter
indicates
applied to
the highest-priority the
is set
that
UEs. local
the to ID
BTS3900, BTS3900 LST CELLMLBHO mode
of thethe is
cell, used. which forIn this
ADD NO_ADAPTIVE,
target
TM4:
QCI,
mode, frequency
Transmission
UEs eNodeB reportthe does YES
LTE MOD CELLMLBHO uniquely
initial
MLB
mode
not MIMO
is4
configure identifies
selected
is permanently
the for a
DRX
CELLPREALLOCGRO RANK,
Indicates
cell within CQI, whether
an and
eNodeB. PMI
UP transmission
Indicates
UEs
applied
parameter
values
smart totothewhether
inpreallocation
idle UEs.
groupmode
modeeNodeB. foris
to is
BTS3900, BTS3900 MOD CELLMLBHO determined
enable or by
disable the
ADD
LST based
TM6:
the UE.
OC_ADAPTIVE:
enabled on cell
Transmission
or disabled UEsfor NO
LTE LST CELLMLBHO setting
preallocation ofiswith
the for a IDof
CELLPREALLOCGRO
CELLPREALLOCGRO reselection
mode
switch
a bearer
Indicates 6between the priorities
permanently
a the
local
BTS3900, BTS3900 UP
UP FixedMimoMode
bearer
frequencies.
applied
open-loop
specified
of with
to UEs.
the cell.preallocation
anda specified
The value
closed-
It uniquely
LST parameter.
preallocation
MLBPRIOBASED
loop adaptive
parameter If the YES
LTE MOD identifies a group
cellMIMO ID
within
CELLPREALLOCGRO
CELLPREALLOCGRO MimoAdaptiveSwitch
parameter
indicates
Indicates
transmission
when
an eNodeB. group
that
the theofID.
ID
modes the If
ADD parameter is set to
BTS3900, BTS3900 UP
UP this
target parameter
parameter frequency
automatically.
PreAllocationSwitch group is set
for to
is
CELLPREALLOCGRO OL_ADAPTIVE or YES
LTE MOD
RMV ON(On),
MLB is
related on.
turned preallocation
selected
to If both for
UP OC_ADAPTIVE,
CELLPREALLOCGRO
ADD
CELLPREALLOCGRO is
UEs enabled
in idle for
preallocations.
PreAllocationSwitch mode thisthe
MOD initial MIMO
BTS3900, BTS3900 UP
CELLPREALLOCGRO
UP bearer.
based
and onIf this
MLB
CELLPREALLOCGRO transmission mode NO
LTE RMV
UP parameter
priorities ofis set
SmartPreAllocationSwi to is
UP TM3. If the
ADD
CELLPREALLOCGRO
MOD OFF(Off),
frequencies.
tch are turned on, andpreallocation
BTS3900, BTS3900 LST MimoAdaptiveSwitch
CELLPREALLOCGRO
UP
CELLPREALLOCGRO
ADD is disabled for this
SmartPreAllocationDur NO
LTE CELLPREALLOCGRO Indicates
parameter the GERAN
istoswitch
set to is a
UP
UP
GERANINTERFARFC bearer.
ation is This
set athe value
UP band to
CL_ADAPTIVE, which the
MOD
LST
N bearer-level
Indicates
greater than the switch
duration
0, uplink and
BTS3900, BTS3900 absolute
initial
takes MIMO
effect radio when the
CELLPREALLOCGRO
ADD
CELLPREALLOCGRO
LST of each
smart
frequency smart
preallocation
channel is NO
LTE Indicates
transmission
cell-level the
switch received
mode is
UP
GERANINTERFARFC
UP
GERANINTERFARFC preallocation.
enabled;
Indicates
number otherwise,
the
(ARFCN) thatlocal
LST signal
TM4. strength
PreAllocationSwitch in
BTS3900, BTS3900 N
N uplink
identity
the UE smart
of(RSSI)
needs the cell.to of Itthe
CELLPREALLOCGRO indicator
the CellAlgoSwitch MO YES
LTE LST
MOD preallocation
uniquely
measure identifies
belongs. is a
If
UP GERAN
is turned BCCH
on.
GERANINTERFARFC
GERANINTERFARFC
ADD disabled.
cell
the within
GERAN This
an switchisis
eNodeB.
ARFCN
ARFCN that a UE
BTS3900, BTS3900 N
N
GERANINTERFARFC a
in bearer-level
the range ofswitch
512toto
needs to measure YES
LTE MOD
RMV
N and takes
810, the value effect ofwhenthis
determine whether it is
GERANINTERFARFC
GERANINTERFARFC
MOD the cell-level
parameter is switch
used to
BTS3900, BTS3900 tolerant
Indicates of the
the QoSthe in
N
N
GERANINTERFARFC PreAllocationSwitch
indicate whether NO
LTE interference
class identifier from (QCI) the of
RMV
N the
GERAN CellAlgoSwitch
ARFCN isID MO
in
LST cells
Indicates
an working
evolved the on
local
packet this
GERANINTERFARFC
LST is
the turned
DCS on.
1800 MHz
BTS3900, BTS3900 CELLSTANDARDQCI frequency.
of the cell.
system It uniquely
LTE
N
GERANINTERFARFC
MOD band
Indicates
identifiesor(EPS)theathe PCS
cell
bearer.
QCI- 1900a
within
YES
N Different
MHz band. QCIs If the indicate
LST
CELLSTANDARDQCI specific
BS. priority for
different
GERAN QoS
ARFCN is the
in
BTS3900, BTS3900 CELLSTANDARDQCI selecting
Indicates atheDRX ID of
requirements,
neither band, such
this as YES
LTE MOD parameter
parameter group.A
group
MOD the packet
parameter delay
does not
CELLSTANDARDQCI larger
related value
to of this
BTS3900, BTS3900 CELLSTANDARDQCI budget,
take effect packet and errorbe
can
ADD parameter
preallocations.
loss rate, indicates
andvalue. The a
resource NO
LTE LST set
lower to either
priority. If the For
CAGROUPSCELLCF
MOD value
type. 255details,
For indicates see an
CELLSTANDARDQCI details,
bearers see
for a3GPP
UE TS
have
BTS3900, BTS3900 G
CELLSTANDARDQCI invalid
Table preallocation
6.1.7 in 3GPP
ADD 36.331.
multiple
parameter QCIs group. and the NO
LTE LST
LST TS 23.203.
CAGROUPSCELLCF
CAGROUPSCELLCF DrxPolicyMode
Indicates the local ID
CELLSTANDARDQCI
BTS3900, BTS3900 G
G parameter
of the cell, is whichset to
LST QCIPRIORITY(QCI YES
LTE MOD uniquely
Indicates identifiesID of athe
theeNodeB
CAGROUPSCELLCF
CAGROUPSCELLCF priority),
cell within the an eNodeB.
eNodeB
selects the to which
DRX the
BTS3900, BTS3900 G
G candidate
parameter secondary group for YES
LTE MOD
RMV serving
the UE based cell (SCell) on the
CAGROUPSCELLCF
CAGROUPSCELLCF belongs.
QCI-specific priorities.
G
G
RMV
CAGROUPSCELLCF
G
only when
SccBlindCfgSwitch
ADD option in the
CAGROUPSCELLCF CaAlgoSwitch
G parameter is set to
LST ON.
CAGROUPSCELLCF Indicates
If this parameter
Indicates the
the priority
local is cell
setof
ADD the candidate
BTS3900, BTS3900 G to TRUE(TRUE),
ID of the candidate the
CAGROUPSCELLCF secondary serving cell YES
LTE MOD eNodeB
secondary can configure
serving cell
G (SCell). A larger value
CAGROUPSCELLCF
ADD this candidate
(SCell). SCell as
MOD of
BTS3900, BTS3900 G
CAGROUPSCELLCF anthis
SCell parameter
for CA UEs in
CAGROUPSCELLCF indicates a higher NO
LTE RMV
G a blind manner,
G priority
CAGROUPSCELLCF
MOD without and resultsA4-
delivering in a
BTS3900, BTS3900 LST higher
G
CAGROUPSCELLCF relatedprobability
measurement of
NO
LTE CAGROUPSCELLCF being
Indicates configured
the offset asfor an
G configurations to CA
G Indicates
SCell
event for the
carrier local ID
LST UEs. IfA3. thisThis offset is
parameter
BTS3900, BTS3900 LST CELLMCPARA Indicates
of the
aggregation
the
is set cell,the
difference
to which time-to-
(CA) between
CAGROUPSCELLCF trigger foridentifies
reporting YES
LTE MOD CELLMCPARA uniquely
UEs.The
Indicates
the signal
FALSE(FALSE), value
the
quality type0 the aa
ofof
G event
cell A3
within
hysteresis oran
for A6. When
eNodeB.
reporting
indicates
the valuecannot
neighboring
eNodeB that
to be cellthisand cell
BTS3900, BTS3900 MOD CELLMCPARA detecting
event that theThis
cannot
that ofA3
included
configure bein
the or
this A6.
configured
the
serving cell. NO
LTE LST CELLMCPARA signal
parameter quality isfor inreport
used the
as
measurement
A an SCell
larger
candidate value
SCell CAastoan
serving
prevent
UEs.
after
SCellevent
indicates forcell
frequent
a A3
CA and
higher
UEs.orthatA6 in is
BTS3900, BTS3900 MOD CELLMCPARA at least one
entering
When theorwhich
triggered,
requirement leaving
eNodeBon canof NO
LTE LST CELLMCPARA neighboring cell meet
event
be setA3
neighboring
configures to oran A6
cell and
SCellqualityfor
the
for
CA entering
decision
SAME_AS_TRIG_QU
reporting
UEs, errors
the condition,
event
eNodeBdue to
A3.
BTS3900, BTS3900 MOD CELLMCPARA Indicates the maximum
the
radio UE
AN(Same
need todoes
signal not
asfluctuation.
deliver Trig A4-report NO
LTE LST CELLMCPARA number of cells to be
the
For
Quan) event
details,
related or to the
see
BOTH(Both).
measurement 3GPP
included
eNodeB
TS
The 36.331. in each
immediately.
valuethe number
BTS3900, BTS3900 MOD CELLMCPARA configurations
Indicates on the
measurement
Instead,
SAME_AS_TRIG_QU the UE report NO
LTE LST CELLMCPARA frequency
of periodic on which
after
reports
AN(Same event A3
theoperates.
as event or A6
Trig onlyis
the SCell
measurement
triggered. For reports
details,
BTS3900, BTS3900 MOD CELLMCPARA when
Quan) the the signal quality
that
see areindicates
Indicates
3GPP
continuously sent TS
that
interval
after
36.331.
meets the NO
LTE LST CELLMCPARA the type
between
Indicates of the
periodic
whether value to
event
entering A3condition
or A6 is
be
eventincluded
measurement
triggered. A3 or For in the
reports
A6details,
is
BTS3900, BTS3900 MOD CELLMCPARA during
that arethe
measurement
triggered
see 3GPP sent time-to-
based
TS report
after on is
36.331. NO
LTE LST CELLMCPARA trigger.
the same asA6 thatis
event
RSRP A3 or
or RSRQ
specified
triggered.
values. Theby
For the details,
measured
BTS3900, BTS3900 MOD CELLMCPARA
TriggerQuantity
see
RSRP 3GPP values TS 36.331.
are NO
LTE LST CELLMCPARA Indicates the offset for
parameter.
stable, slightly The value
varying
event
Indicates
BOTH(Both) A6. This
the offset
name ofis
BTS3900, BTS3900 MOD CELLMCPARA the the load,indicates
withdifference
operator. and
between
The
that both RSRP and NO
LTE LST CELLMCPARA therefore
the signal athere
quality is little
name
RSRQ
signal
isvalues string
fluctuation. areofof aa
The
neighboring
maximum
included of
in the cell
32 and
BTS3900, BTS3900 MOD CELLMCPARA measured
that of the RSRQ
characters.
measurement serving
The cell.
string
report. NO
LTE LST CELLMCPARA values vary with the
ADD CNOPERATOR A
Thelarger
cannot be
measured valueall null
RSRP
load and are
indicates likely to
BTS3900, BTS3900 LST CNOPERATOR characters
Indicates
values
reflect areathe
the
higher
or
stable,
signal
contain
index of
YES
LTE MOD CNOPERATOR requirement
any
the of the
operator.
slightly varying on
following with
quality
Indicates
neighboring
characters: of the
thedouble type
cell inofthe
cellquality
RMV CNOPERATOR
ADD CNOPERATOR load,
real and
time. marks therefore
BTS3900, BTS3900 the
for operator.
reporting
quotation
there is little signal The("),A6.
event
MOD CNOPERATOR operator NO
LTE
LST CNOPERATOR fluctuation. The the
commas can
(,), be
primary
semicolons
measured operator (;), equal
RSRQ or a
ADD CNOPERATOR
BTS3900, BTS3900 secondary
signs
values(=), vary operator.
single
with the
MOD CNOPERATOR NO
LTE For
loadeach
quotation
and are eNodeB,
marks likely only
('),to
LST CNOPERATOR
ADD CNOPERATOR one primary
Indicates
three
Indicates the
consecutive
reflect the signalthe operator
mobile
mobile plus
BTS3900, BTS3900 but more
network
signs (+++), than
code one
(MNC) of
LTE
MOD
ADD CNOPERATOR country
quality thetwo
ofcode (MCC)
cell orin of NO
LST CNOPERATOR
CNOPERATORIPPAT secondary
the
realoperator.
more
the consecutive
operator.
time. operator
For The details,
ADD
H CNOPERATOR can
see be
value
spaces, ofconfigured.
3GPP thisTSparameter
and two or
36.331.
BTS3900, BTS3900
MOD
LST CNOPERATOR is
morea string
consecutiveof two or NO
LTE
LST CNOPERATOR
CNOPERATORIPPAT three
percent characters,
signs (%).each
ADD of
BTS3900, BTS3900 H
CNOPERATORIPPAT Indicatesmust
which ID
the tracking beofathe
YES
LTE MOD digit
area ID, which from
IP in
path. the range
H 0 to 9. identifies an
CNOPERATORIPPAT
MOD uniquely
BTS3900, BTS3900 ADD
H Indicates the ID of the
CNOPERATORIPPAT entry of tracking area NO
LTE CNOPERATORTA
RMV operator.
H information. This
LST
CNOPERATORIPPAT
LST parameter is used only
BTS3900, BTS3900 CNOPERATORTA
H
CNOPERATORIPPAT
ADD within the eNodeB and YES
LTE MOD
H
CNOPERATORTA is not used during the
CNOPERATORTA
BTS3900, BTS3900 MOD information
Indicates theexchange index of
RMV NO
LTE CNOPERATORTA with the EPC. This is
the operator.
CNOPERATORTA
LST different from the TAI
CNOPERATORTA configured in the EPC
TAL.
area code (TAC),
ADD which is used by the
CNOPSHARINGGRO EPC to determine the
UP area within which
ADD paging messages are
SECONDARYOP2GR sent. One tracking
ADD
OUP area is comprised of
CNOPERATORTA
LST one or more cells. Two
BTS3900, BTS3900 MOD
CNOPSHARINGGRO Indicates the0x0000(0)
ID of a
TAC values NO
LTE CNOPERATORTA
UP carrier-sharing
and 0xFFFE(65534)
LST
ADD
LST operator group. This
BTS3900, BTS3900 are reserved
Indicates whether according the
CNOPERATORTA
CNOPSHARINGGRO
SECONDARYOP2GR parameter uniquely YES
LTE to the protocol
eNodeB automatically and will
UP
OUP specifies
not be used athe carrier-
inIDfuture
ADD Indicates
updates the of the
MOD
MOD sharing
versions. operator
Therefore,
BTS3900, BTS3900 SECONDARYOP2GR primary operator
configuration of in a
CNOPSHARINGGRO
CNOPSHARINGGRO group.
do not use 0cells or 65534 NO
LTE OUP carrier-sharing
neighboring
UP
UP Indicates
as a TAC the
value ID in of TACa
RMV operator
based ongroup. the
BTS3900, BTS3900 LST
RMV Indicates
secondary
planning or the eNodeB
operator in
SECONDARYOP2GR messages received YES
CNOPSHARINGGRO
MOD sharing
LTE CNOPSHARINGGRO
OUP
a
over
Indicates themode,
carrier-sharing
configuration. X2 whether which
interface. to
UP
ENODEBSHARINGM can
UP
LST set abe
operator
The independent
messages
logical group. channelinclude
BTS3900, BTS3900 ODE
RMV mode,
X2
group SETUP RAN
profile. sharing
REQUEST,
SECONDARYOP2GR
MOD Indicates the method NO
LTE LST
SECONDARYOP2GR with
X2 common
SETUP
Currently, carriers,
OUP
GLOBALPROCSWITC
ENODEBSHARINGM
OUP of
RAN X2 setuptwo
sharing bywith logical
SON,
RESPONSE,
channel
Indicates
that is, whether
group
the the method and
RRC profiles toof
ENB
BTS3900, BTS3900 H
ODE dedicated carriers,X2 or
MOD enable
CONFIGURATION
are
connection or
available:
automatically disable setting NO
LTE LST hybrid RAN sharing.
GLOBALPROCSWITC setup
UPDATE.
LCG_PROFILE_0by
reestablishment SON.
up X2 interfaces. The and
GLOBALPROCSWITC
BTS3900, BTS3900 H
H Turn
value
Indicates off
LCG_PROFILE_1.
protection the
X2_OVER_OSS switch
threshold.
whether toifIf
MOD Indicates
the eNodeB
LCG_PROFILE_0
UE manufacturers the switch is
may NO
LTE LST can be or
enable setdisableonly forRAN
GLOBALPROCSWITC used
used,
have to
configuration control
different
only one data theon a
logical
GLOBALPROCSWITC Huawei
information
Indicates eNodeBs,
whether and
BTS3900, BTS3900 H
H
data
network
channel forwarding
understanding
the value
management is
group to be is the
of
(RIM) for
MOD eNodeB
mechanism
modified by in
using S1- the NO
LTE LST assigned
protocols,
X2_OVER_S1
handovers toand non-GBR
within can an be
GLOBALPROCSWITC
GLOBALPROCSWITC simultaneously
based
interlocking
services.
therefore incoming
IfUE sends
set
RNC forpool.
Indicates
Uu messages eNodeBs An RNC
whether during oftoany
BTS3900, BTS3900 H
H handovers.
modification
LCG_PROFILE_1
compliance function
with is
MOD vendor.
pool
select
security can be
transport
mode used for NO
LTE LST If
on the
used,the
protocols switch
CME
two varies is
and
logical turned
and
GLOBALPROCSWITC load
network
activation
off, balancing
uplink layer and
datato (TNL)
GLOBALPROCSWITC modifications
channel
may be different
groups the
are
from
BTS3900, BTS3900 H between
parameters
reconfiguration.
forwarding RNCs. based
and IfAn on
this
H parameters
assigned
eNodeB of
compliance
to a
non-GBR NO
LTE MOD
LST RNC
the
switch
downlink can
primary is take
turned
data PLMN over on, ID athe
neighboring
services:
with
cell the was
that same eNodeB
onecontrolled
to high-
GLOBALPROCSWITC
GLOBALPROCSWITC or selected
eNodeB
forwarding PLMN
are on ID
will
by be updated
priority
protocols.
another non-GBR After
RNC ainUE the
the
BTS3900, BTS3900 H
H that contained
simultaneously
separately
Indicates the insends
determined.
UMTS the
MOD local
services
initiates
pool. eNodeB an
and RRC through
the other NO
LTE LST SON
Uu
Indicates
The
load configuration
messages.
target
transmissionwhether
eNodeB Ifthe this
toX2
GLOBALPROCSWITC messages
to low-priority
connection over non-
GLOBALPROCSWITC message.
switch
enable
can
channel.choose is
the The This
turned eNodeB
X2to send
eNodeB off, the
to
BTS3900, BTS3900 H interface.
GBR services.
reestablishment These
H parameter
eNodeB
remove
both
interface
sends the RAN-external
sends
uplink is
self-setup used Uu
and cellfor NO
LTE MOD
LST parameters
procedure due to include
X2
and self-setup
messages
downlink
function neighboring
INFORMATION-
eNodeBId, for one
destination
reconfigurationFailure the inby
CellId, RAN
cell
target one.
GLOBALPROCSWITC
GLOBALPROCSWITC sharing
configurations
addresses,
operator.
REQUEST
LocalCellId,
and the the scenarios. not
PDUs from
send to
BTS3900, BTS3900 H
H Indicates time
MOD Selecting
neighboring
the
UTRAN uplink
CnOperator,
reestablishment cellsTNL
and cell
to lists
is NO
LTE LST during which the X2on
GLOBALPROCSWITC parameters
(NCLs)
downlink
request
CnOperatorTa,
complete, and
multiple
the based
destination CellOp,
GLOBALPROCSWITC interface configuration
BTS3900, BTS3900 H the
reportsprimary
neighboring
addresses,
PhyCellId,
subsequent on thePLMN
or
and relation
RRC send
load ID
H is retained for a local NO
LTE MOD
LST applies
tables
only the
status
DlEarfcn.
connection to
(NRTs)
ofuplink X2
UTRAN
Thisa peer self-
based
or cells
GLOBALPROCSWITC eNodeB
setup
on the
downlink ENB and
between destination
GLOBALPROCSWITC only
prevents when
reconfiguration
eNodeB the
when the may
the two
BTS3900, BTS3900 H
H eNodeBs
CONFIGURATION
address
parameter
configuration to provided
the
is set
datasourceto by
from
fail again.
eNodeBs
Indicates As
do
whether a
not result,
have
to NO
LTE MOD
LST different
UPDATE
eNodeB.
BASED_ON_RIM.The
being lost suppliers.
message.
orrelationship
abnormal For If
the
a UE
neighbor
send initiates
E-UTRAN an
cell
GLOBALPROCSWITC
GLOBALPROCSWITC X2
this
If theself-setup
function
during parameter
switch
thespecified is between
automatic is
turned set
by to
RRC
with
load connection
each
information. other. Ifisthe
BTS3900, BTS3900 H
H Huawei
ON, this
on, parameter
the
update.uplink eNodeBs,
function
datavalue
MOD reestablishment
local
The eNodeB
RimUtranSwitch NO
LTE LST selecting
enabled.
forwarding
BASED_ON_ECO IfTNL this
and
GLOBALPROCSWITC This
procedure
determinesswitch must
again.
that If is
be this
GLOBALPROCSWITC option
parameters
parameter
downlink
temporarily
turned
repeatedly
Indicates
controls
on data
ifisthesetatothe
based
happens,
whether
on
BTS3900, BTS3900 H
H neighbor
whether
the
OFF, selected
forwarding this torelationship
send
function
are PLMN E-isID
MOD unavailable.
interlocking
the UE repeatedly
RRCConnectionRecon NO
LTE LST is
is not
UTRAN
used
disabled.
determined configured
cell
in load
preference.
Ifmessage
both
together. for
the
GLOBALPROCSWITC
GLOBALPROCSWITC modification
Indicates
initiates
figuration
the local RRC the
and function
UE
peer link
information
X2BasedUptENodeBC
The target through
eNodeB
BTS3900, BTS3900 H
H on
faultthe
connection
sent
eNodeBs,
RAN detection
from CME
information the
the is switch.
not
source
local
MOD fgSwitch
canthischoose
used
If and
switch
reestablishment.
eNodeB parameter
to the ato is send
eNodeB
UE turnedIf this NO
LTE LST Indicates
eNodeB
management the
starts value
the
(RIM) of
GLOBALPROCSWITC and
both
parameter
contains this
the
configuration
on, link parameter
uplink
fault
the is and
detection
data
set
power to on area
0,
GLOBALPROCSWITC the
timer IE
procedures andDefault removes
to paging
the the
BTS3900, BTS3900 H set
is
the to
downlink
network
enabled ON,
function
headroom is the
destination
to
forofbe eNodeB
RRC
H DRX
X2
UTRAN. contained
interface This optionin cell
the NO
LTE MOD
LST removes
addresses,
modified
synchronized
connection
configuration external
by not
using
UEs.
duringsend theIfthe
a
S1
and
the SETUP
configuration
applies only
neighboring
uplink and REQUEST
when
to LTE cell
GLOBALPROCSWITC
GLOBALPROCSWITC automatic
this switch
reestablishment
handover eNodeB
is
where turned the
and
timer
FDD. ENB
expires.
If
configurations
downlink the destination If
fromthis
BTS3900, BTS3900 H
H configuration
off, link fault
LTE MOD
LST
protection
eNodeB
CONFIGURATION
parameter
RimUtranSwitch
NCLs
addresses, and
works isordetection
is
NRTs
update
not
set asused.
send to the
option
ifthis0,
the NO
over
is
If not
this
target
UPDATE
the
is X2 the
enabled
selected, X2
parameter
eNodeB. interface.
messages
automatic the for If is set
GLOBALPROCSWITC
GLOBALPROCSWITC following
only
synchronized
to a value conditions
the downlink other UEs. than
BTS3900, BTS3900 H
H
parameter
that
removal
eNodeB
are the eNodeB
met:
destination (1)
is set
function
sends The
address cell is to0,
to
sends
ENB
MOD the
ON(On),
over eNodeB
disabled.
load the the
S1
information rejects
interface. the NO
LTE LST CONFIGURATION
the
RRC source
connection eNodeB.
GLOBALPROCSWITC RRCConnectionRecon
For
through details, RIM see 3GPP
GLOBALPROCSWITC UPDATE
The targetmessage
reestablishment eNodeB
BTS3900, BTS3900 H figuration
TS 36.413.
procedures message
toonly the the
H received
cannot
request sendover
due to the X2 NO
LTE LST must
UTRAN containand the
notifies
interface
uplink
power contains
destination
reconfigurationFailure
headroom the
GLOBALPROCSWITC the
IE UTRAN
"Served
address to of cell
Cells
the sourceTo load
H from a UEthrough
configuration.
changes when If this the
RIM
Delete"
eNodeB.
number
parameter (identified
of RRC is set to by
procedures.
the IE ID 27);
connection
OFF(Off),
The EcoSwitch the (2) power The
option
No Remove
reestablishment
headroom attribute
controls
for the neighborwhether to
requests
configuration
send cell initiated
load is by
relationship
the UE
optional served
in theis set by the to
information
permit removals. to the
BASED_ON_FAULT: If
based
this on which
option the
isisselected,
This
eNodeB switch selects only a
X2
valid automatic
when a UMPTremoval
mobility
based on management
X2 fault is
and
entityan(MME) LMPT area in
for UE
enabled.
one BBU, with thefrom
in cell reselection
BASED_ON_X2USAG
MOD UMPT
a GERAN as the or UTRANmain
GLOBALPROCSWITC E_WITH_NEGO:
Ndicates
control the
board length
and Ifthe
this
of
cell
option
the to an
Indicates
timer is E-UTRAN
the
selected,
for threshold X2
BTS3900, BTS3900 H LMPT
cell. as the bit extended
LTE MOD
LST of theIf number
automatic this
automatically
board.The removal
LMPT
isofset to
removingcan
NO
0, the eNodeB
incoming
based on handovers
X2 usage
GLOBALPROCSWITC
GLOBALPROCSWITC X2 interfaces
be configuredchooses based
with a on
preferentially
for
X2 automatically
through
usage. negotiation
If the
BTS3900, BTS3900 H
H Indicates
maximum the
of threshold
18 cells.
MOD the
between
number MMEofthe
removing which
X2 stores
interfaces
local
handovers and NO
LTE LST of
Thisthe
Indicates number
switch the of
length
should beof
GLOBALPROCSWITC the
based
peer
from UE oncontext.
eNodeBs
a peer X2 usage.
eNodeB isIf this Ifto
outgoing
the
off
bit iftimer
the
isnumber handovers
for
eNodeB
seteNodeB
to 1, the for
BTS3900, BTS3900 H
H the
enabled.This
a local
automatically
needs of option
within
removing
to preferentially
be configured
MOD eNodeB
handovers from a bypeer NO
LTE LST applies
the
X2
more time tospecified
interfaces
than the
18 based
cells. on
GLOBALPROCSWITC
GLOBALPROCSWITC chooses
eNodeB
scenarios
thisusage. the
to
timerIfisan a
wherelowly
local
less the
than
X2
loadedfault. MME. If the X2
BTS3900, BTS3900 H
H eNodeB
X2
the
numberinterface
interface within
of isThe
handovers
isthisfaulty the
normal NO
LTE MOD
LST setting
time
and of
specified
the peer bit
by
eNodeB only
the to
X2SonDeleteHoInNum
from
throughoutaeffect
localthe eNodeBtime
GLOBALPROCSWITC
GLOBALPROCSWITC takes
X2SonDeleteTimerforX
is a Huawei on
eNodeB.UEs
Thd
a peer
specifiedparameter
eNodeB
bythe this value
within
timer,
BTS3900, BTS3900 H
H that
2Usage report
BASED_ON_X2USAG parameter globally is
MOD andtime
the the number
eNodeB specified ofby NO
LTE LST unique
less than MME
E__WITHOUT_NEGO: this identifier
GLOBALPROCSWITC handovers
the
automatically from the
removes
GLOBALPROCSWITC (GUMMEI)
parameter
If this option information
value
isto the and
BTS3900, BTS3900 H local X2 eNodeB
X2SonDeleteTimerforX
the interface.
H
ADD within
the
selected, which
number X2 the
ofautomatic NO
LTE MOD
LST peer
2Usage eNodeBparameter within is
LICENSESHARINGPO highest
handovers
removal
the time bit
basedof
from
specified the on MME
the byX2
GLOBALPROCSWITC
GLOBALPROCSWITC less
group than this
identifier
BTS3900, BTS3900 LICY
H local
usage
this timer
parameter eNodeB
without
isvalue
also to the
less
and
H (MMEGI) is 0. NO
LTE LST
LST peer
thannumber
the
Indicates eNodeB
negotiation
the theof within
between
LICENSESHARINGPO
GLOBALPROCSWITC
ADD the time
local specified
handovers
proportion and
X2SonDeleteHoOutNu from
of peer
the the by
BTS3900, BTS3900 LICY
H
LICENSESHARINGPO the
eNodeBs
Indicates
mThd
peer
number is
the
parameter
eNodeBofthe UEstointheof
index
Indicates
X2SonDeleteTimerforX
enabled.This option YES
LTE MOD
LICY the
value,
local operator.
the
eNodeB
RRC_CONNECTED local within
LICENSESHARINGPO proportion
2Usage
applies
eNodeB to of users
parameter
the
automatically is
ADD
MOD the
mode time of specified
the operator by
BTS3900, BTS3900 LICY that
also the
scenarios
removes less operator
than
thewhere the
X2 is can
the
LICENSESHARINGPO
LICENSESHARINGPO the
when the eNodeB NO
LTE RMV share to other
X2SonDeleteHoOutNu
X2 interface
interface between is normal the
LICY
LICY X2SonDeleteTimerforX
shared among
LICENSESHARINGPO operators
mThd
and
eNodeBs.the parameter
peer when eNodeBthe
MOD 2Usage parameter
BTS3900, BTS3900 LST
LICY
operators.
eNodeB
value,
is notlessathe shared is
This
islocal
Huawei
LICENSESHARINGPO
LICENSESHARINGPO also
parameter thanmust the beThisset NO
LTE ADD among operators.
eNodeB automatically
LICY ECO
LICY eNodeB.
X2SonDeleteHoInNum
based on the
parameter must contract
be set
DSP
LST ECO removes
Thd
signed parametertheoperators.
with X2value,
BTS3900, BTS3900 Indicates
based
Indicates
interface on the
the ID
whether to
between of
contract the
the
LST ECO
LICENSESHARINGPO the local YES
LTE
MOD ECO
ECO
signed
configure
eNodeBs. MO. byeNodeB
operators.
the control-
LICY
ADD ECO automatically removes
RMV ECO This parameter
plane end point appliesgroup,
BTS3900, BTS3900 MOD ECO the X2
only to LTEendinterface FDD.
user-plane
between the eNodeBs. point NO
LTE DSP ECO
ADD ECO group,
Indicates or the
bothIDend of the
LST ECO
BTS3900, BTS3900 MOD ECO point groups for
control-plane endthe point
ECO NO
LTE DSP ECO groupMO. used by the
ADD ECO
LST ECO Indicates
ECO MO.the ID of the
BTS3900, BTS3900 MOD ECO user-plane end point
NO
LTE DSP ECO group used by the
ADD ENODEBPATH
LST ECO ECO MO.
BTS3900, BTS3900 LST ENODEBPATH Indicates the ID of the
YES
LTE MOD ENODEBPATH IP path.
RMV ENODEBPATH
ADD ENODEBPATH Indicates the
BTS3900, BTS3900 Indicates
MOD ENODEBPATH applicationthe type S1 of the NO
LTE interface
LST ENODEBPATH IP path. ID of the IP
ADD ENODEBPATH path. This parameter is
BTS3900, BTS3900
MOD ENODEBPATH unavilable in this NO
LTE
LST ENODEBPATH version, it is
ADD ENODEBPATH Indicates
recommended the X2 to be
BTS3900, BTS3900
MOD ENODEBPATH interface
set as 0. ID of the IP NO
LTE ADD S1
LST ENODEBPATH path.
DSP S1
BTS3900, BTS3900 Indicates the S1 object
LST S1 YES
LTE ID.
MOD S1
ADD
RMV S1
S1 Indicates the ID of the
BTS3900, BTS3900
MOD S1 operator that owns the NO
LTE
LST S1 S1 object.the ID of the
Indicates
ADD S1
BTS3900, BTS3900 control-plane end point
MOD S1 NO
LTE group used by the S1
LST S1 Indicates
ADD S1 object. the ID of the
BTS3900, BTS3900 user-plane end point
MOD S1 NO
LTE group used by the S1
LST S1
object.
Indicates the
compliance protocol
ADD S1 release of the MMEs
BTS3900, BTS3900
MOD S1 to which the eNodeB is NO
LTE
LST S1 connected through the
ADD S1 Indicates
S1 interfaces
Indicates the
the priorityof a of
under
ID
BTS3900, BTS3900
MOD S1 description
an
thisMME
S1 object.
carrier-sharingto of the S1
which the NO
LTE
LST S1 object.
eNodeB
Indicatesis
operator connected
whether
group thatto
ADD S1 through the S1
BTS3900, BTS3900 configure
shares the theS1 control-
MO. If
MOD S1 interface. A large NO
LTE plane or user-plane
the eNodeB works in
LST S1 parameter value
ADD S1 end
hybridpointRAN group.
sharing
BTS3900, BTS3900 indicates
mode, setathis high
MOD S1 NO
LTE priority.
parameter After to this
a value
LST S1
ADD S1 parameter
within the range is set from
for 1
BTS3900, BTS3900 ADD MMEs,
Indicates the the eNodeB
MOD S1INTERFACE
S1 to 5. If the eNodeB NO
LTE BLK S1INTERFACE can select
compliance aprotocol
high-
LST S1 works in independent
DSP S1INTERFACE priority RAN
release
mode, MME
of the for UEsto
MME
sharing
BTS3900, BTS3900 Indicatesthe the
attempting
which to ID
eNodeB of the
access is
MOD S1INTERFACE with common carriers YES
LTE S1
the interface.
network.
connected through the
RMV S1INTERFACE mode, or RAN sharing
ADD S1INTERFACE
RST S1INTERFACE Indicates
S1 interface. the
with dedicated carriers ID
The of the
BTS3900, BTS3900
MOD S1INTERFACE
UBL S1INTERFACE control
eNodeB port
mode, retain sends bearer
theS1 for NO
LTE
DSP S1INTERFACE the S1 interface.
messages
default value complying
255,
ADD S1INTERFACE Indicates
with the the ID
protocol of the
BTS3900, BTS3900 which is an invalid
MOD S1INTERFACE operator
release that owns
specified bythe NO
LTE value.
DSP S1INTERFACE S1
thisinterface.
parameter. The
ADD S1INTERFACE Indicates
Indicates whether
the prioritythe
BTS3900, BTS3900 Indicates
value
S1 of
interface the
this ID of a of
parameter
is
MOD S1INTERFACE an MME
carrier-sharingto which the NO
LTE must
blocked.be the same
Anconnected
S1 as
DSP S1INTERFACE eNodeB
operator is
group that
ADD S1INTERFACE the MME-complied
interface is blocked
BTS3900, BTS3900 through
shares the S1 If the
MOD S1INTERFACE after thethe
protocol
interface.
S1Interface
release.
execution
A large of NO
LTE MO. If the eNodeB
parameter value is
DSP S1INTERFACE BLK S1INTERFACE
Indicates
parameter whether
value the
ADD S1INTERFACE works
different
and isatin hybrid
from
unblocked RAN
the after
BTS3900, BTS3900 MME
indicates
sharing
MME-complied thea other
high
mode,ofset end
this
MOD S1INTERFACE thethe
of execution
S1Afterinterface UBL NO
LTE priority.
parameter
protocol to this
release, a value
the
DSP S1INTERFACE S1INTERFACE.
supports Huawei-
ADD S1INTERFACE parameter
within
way inthe which is set
range for
thefrom
MME1
BTS3900, BTS3900 proprietary
MMEs, the positioning
eNodeB
MOD S1INTERFACE to 5. If the
handles theseeNodeB NO
LTE procedures,
can select which
high- are
DSP
LST S1INTERFACE works
message isasubject
in independent to
included
priority
mode,
the MME MME
RANin for UEs
sharing
BTS3900, BTS3900 MMEFEATURECFG Indicates
minimization
attempting the ID
to of of
drive
access an
with common
implementation. carriers YES
LTE MOD S1
the interface.
tests (MDT).
network. The value
MOD
MMEFEATURECFG mode, or RAN sharing
DISABLE(disable)
with dedicated carriers
BTS3900, BTS3900 MMEFEATURECFG
indicates
mode, retain thatthe the MME NO
LTE LST
ADD X2 does
default not support
value 255,the
MMEFEATURECFG
DSP X2
BTS3900, BTS3900 procedures
Indicates
which is an and
theinvalid
X2 object
LST X2 therefore the eNodeB YES
LTE ID.
value.
MOD X2 cannot obtain UE
ADD
RMV X2
X2 Indicates the ID of the
location information
BTS3900, BTS3900
MOD X2 operator
from the MME to which the
through NO
LTE
LST X2 X2
the MO
Indicates belongs.
procedures.the ID of The the
ADD X2
BTS3900, BTS3900 control-plane
value end point
MOD X2 NO
LTE group used by the X2
ENABLE(enable)
LST X2 Indicates the opposite.
ID of the
ADD X2 object.
indicates the
Indicates
BTS3900, BTS3900 user-plane
compliance protocol end point
MOD X2 NO
LTE group used
release of the by the X2
LST X2
ADD X2 object.
neighboring
BTS3900, BTS3900 Indicates theeNodeBs ID of a
MOD X2 to which the local
carrier-sharing NO
LTE
LST X2 eNodeB
operator are
group connected
ADD X2 Indicates
through thetheX2 that
BTS3900, BTS3900 shares the X2 MO.X2If
MOD X2 description
interfaces of the
managed NO
LTE
LST X2 the eNodeB
object. works inby
the X2
Indicates
hybrid MO.
RAN whether
sharing to
ADD X2
BTS3900, BTS3900 configure
mode, setthe thiscontrol-
MOD X2 NO
LTE plane
parameteror user-plane
to a value
LST X2
ADD X2 end
within the group.
point range from 1
BTS3900, BTS3900
MOD X2 to 5. If the eNodeB NO
LTE
LST X2 works in independent
mode, RAN sharing
with common carriers
mode, or RAN sharing
with dedicated carriers
mode, retain the
default value 255,
Indicates the mobile
country
Indicatescode whether of thethe
ADD neighboring
X2 list is athe eNodeB
blacklist orto
X2BLACKWHITELIST Indicates
be added to mobile
the list.
whitelist.
network If a of the
code
BTS3900, BTS3900 RMV The value
neighboring ofeNodeB
this is
ADD neighboring eNodeB to YES
LTE X2BLACKWHITELIST parameter
added to the is a
X2 string of
X2BLACKWHITELIST
LST be
threeadded characters,to the list.
each
BTS3900, BTS3900 RMV blacklist,
The valuemust an ofX2 this
X2BLACKWHITELIST of which
interface between be athe YES
LTE ADD
X2BLACKWHITELIST parameter
digit in the is
range a string of 0 of
X2BLACKWHITELIST
LST local
two eNodeB and this
to 9.or three
Indicates the ID of the
BTS3900, BTS3900 RMV
X2BLACKWHITELIST neighboring
characters, eNodeB
each of to
neighboring
cannot be eNodeB YES
LTE X2BLACKWHITELIST which must be a digit
ADD be added to the list.
automatically
LST in the range ofset 0 to up9.or
BTS3900, BTS3900 X2BLACKWHITELIST
X2BLACKWHITELIST the X2 interface set up
NO
LTE LST
ADD X2INTERFACE between the local
X2BLACKWHITELIST
DSP X2INTERFACE eNodeB and this
BTS3900, BTS3900 Indicates
neighboring theeNodeB X2 is
MOD X2INTERFACE YES
LTE interface
abnormal. If a ID.
RMV X2INTERFACE
ADD X2INTERFACE
RST X2INTERFACE neighboring
Indicates theeNodeB ID of a theis
BTS3900, BTS3900 added
MOD X2INTERFACE control to
carrier-sharing port thebearer X2 for NO
LTE whitelist,
operator the X2that
group
DSP X2INTERFACE the X2 interface.
ADD X2INTERFACE Indicates
interface
shares the the X2ID of to
between the
the
BTS3900, BTS3900 Indicates whether
MOD X2INTERFACE operator
local eNodeB
Interface that
MO. owns
and
If the the
this NO
LTE enable the adaptive
DSP X2INTERFACE X2
eNodeBinterface.
neighboring
Indicates works
the eNodeB in
protocol
ADD X2INTERFACE configuration of
BTS3900, BTS3900 cannot
hybrid
release be
RANwithrelatedsharing
which the
MOD X2INTERFACE parameters
Indicates whether toto NO
LTE automatically
mode,
peer set
eNodeB this removed.
DSP X2INTERFACE Radio
enable Link
DRX. Control
The
parameter
complies.
(RLC). If to a value
BTS3900, BTS3900
ADD X2INTERFACE setting
within theofthisthis
range
MOD X2INTERFACE parameter
parameter is
has setnofromto 1 NO
LTE to 5.
ON(On), If the the eNodeBeNodeB
DSP X2INTERFACE effect on dynamic
works
adaptively in independent
configures
BTS3900, BTS3900 MOD DRX DRX. DRX
mode, RANapplies sharing to a
the lengths of the this NO
LTE LST DRX CA UE
with common
Indicates only whetherwhencarriers to
following
Indicates
parameter timers
theis set QoS toshort
ADD mode,
enable or
or RAN disable sharing
BTS3900, BTS3900 MOD DRX according
Class
ON(On) Identifier
on toboth the (QCI)
RLCPDCPPARAGRO with
DRX dedicated
cycles. Short carriers NO
LTE LST number oftoUEs in the
UP DRX of an cycles
eNodeBs
mode,
DRX EPSretain bearer.
which
the
reduce the
the
cell
PCell when
Different and new
QCIsSCell UEs of the
MOD default
traffic value
delay. 255,
BTS3900, BTS3900 access
represent
CA UEisbelong. thedifferent
cell:
RLCPDCPPARAGRO which an invalid NO
LTE (1)
QoS The polling
specifications PDU
UP value.
retransmission
such as the packet timer
BTS3900, BTS3900 LST STANDARDQCI
LST for
delaythe UE
budget, packet YES
LTE RLCPDCPPARAGRO
MOD STANDARDQCI Indicates the weight
whether to
(2)
error The loss polling
rate, PDU
and
UP factor
enable used
or in
disable the
retransmission
resource type timer
BTS3900, BTS3900 MOD STANDARDQCI calculation
adaptive
Indicates
for the CQI
eNodeB of (whether
whether to
Indicates
the service
Indicates the
the is aperiodic
a
weight
type GBR of NO
LTE LST STANDARDQCI connection
reporting.
enable
(3) The the If priorities
UE-specificthis
CQI
service
factor
adaptive
during reporting
usedorMIMO
uplink not).
in theFor
for a
parameter
optimization
timer forsee
configurations is
prohibiting set
onand to
CQIthe
BTS3900, BTS3900 MOD STANDARDQCI details,
calculation
multi-antenna
scheduling. of TableeNodeB.
ON, the
reporting
status CQIperiods period and NO
LTE LST STANDARDQCI trigger
6.1.7
connection
The inreporting
values
adaptively
condition
3GPP areTSof for
priorities
changes
from
MOD PUCCH
the receiver
aperiodic
23.203. resources
CQI
during
described
based
CQI downlink
on
reporting. as follows:
the airIf this
BTS3900, BTS3900 CQIADAPTIVECFG (4) The
reporting
scheduling. eNodeB-
during
NO_ADAPTIVE:
Indicates
interface
switch is the
load
turned fixed
of A CQI
the
on, the NO
LTE LST specific
handovers. timer When for this
fixed
period.
cell.
eNodeB If MIMO A
this fixed
parameter
configures CQI is
MOD
CQIADAPTIVECFG prohibiting
switch is statuson, the
turned
transmission
period
set
less to
UEs is
OFF, used
with the mode
awhen
CQI
short is
BTS3900, BTS3900 CQIADAPTIVECFG reporting from
aperiodic CQI the
used.
CQI
period
CQI That
period is theis,
reporting adaptation
specified
period, NO
LTE LST receiver
reporting
Indicates the fixed
MOD transition
is
by disabled.
the
decreasing between
This
PUCCH
CQIADAPTIVECFG configurations
MIMO
MIMO transmission
transmission are only
BTS3900, BTS3900 CQIADAPTIVECFG parameter
UserCqiPeriodCfg
resources is valid
tohandover
be used
included
mode
modes
for FDD is in
configured
not
cells. by a NO
LTE LST parameter.
and increasing
commands. This
If no
MOD multi-antenna
supported.
parameter is valid eNodeB only
CQIADAPTIVECFG available
periodic
for UEs. PUSCH
CQI
This reporting
BTS3900, BTS3900 CQIADAPTIVECFG OL_ADAPTIVE:
for FDD
resources. cells.If this The
MOD configurations
parameter
open-loop is valid
adaptive is only NO
LTE LST switch is turned off,
MIMOADAPTIVEPAR configured
when
MIMO transmissionfor a UE,the
CQIADAPTIVECFG eNodeB configures
BTS3900, BTS3900 ACFG an
mode aperiodic
MimoAdaptiveSwitch
Indicates is used. whether CQI In to is
this
MOD more
reporting
set to UEs is with
NO_ADAPTIVE. a short
triggered NO
LTE LST mode,
enable
CQI UEs
or disable
reporting report RI
SRS
MIMOADAPTIVEPAR
MIMOADAPTIVEPAR after
There
and
period the
CQI are UE four
values
adaptation. isperiod,
handed
values.
but Ifdo
BTS3900, BTS3900 ACFG increasing
over
TM2: and then
Transmission PUCCH has data
ACFG not
this report
parameter
resources PMI
toWhen values
is
be used set to NO
LTE LST to
mode
to
ON, transmit.
the the 2 is
eNodeB.
SRS permanently
period this
MOD and
switch decreasing
istoturned off,
MIMOADAPTIVEPAR applied
CL_ADAPTIVE:
adaptively
available
UEs.
changes
PUSCH Thethe
BTS3900, BTS3900 SRSADAPTIVECFG
ACFG aperiodic
TM3:
closed-loop CQI
Transmission adaptive
based on the SRS
resources. NO
LTE LST reporting
mode
MIMO 3transmissionis permanently
algorithm. If this
SRSADAPTIVECFG configurations
applied
mode isto used.UEs. are
In to not
this
parameter is set
included
TM4:
mode,the
OFF, UEs in
Transmission
SRS handover
report period RI,
commands
mode
CQI,
is theand 4 isPMI
specified butvalues
permanently are
by the
configured
applied
to the eNodeB.
UserSrsPeriodCfg to UEs. after the
UE
TM6: is
OC_ADAPTIVE:
parameter. handed
Transmission over. UEs
mode 6
switch between theis permanently
applied
open-loop to UEs.and closed-
Indicates
Indicates the the punishfixed
MOD time of handover
SRS period. A fixed
BTS3900, BTS3900 SRSADAPTIVECFG preparation
SRS period failures is used in NO
LTE LST optimized handovers,
when SRSthe
Indicates period
interval
SRSADAPTIVECFG Indicates the
BTS3900, BTS3900 MOD HOMEASCOMM
including
adaptation
at which periodic is triggering
frequency- disabled.
quantity
priority-based
measurement for thereports inter- NO
LTE LST HOMEASCOMM
MOD RAT measurement
handovers,
are sent to the service-
BTS3900, BTS3900 INTERRATHOCOMM event
based
Indicates
eNodeB A1 or
theA2
handovers,
after report.
interval
the and
The quantity
SPID-based
at which can be NO
LTE LST event for periodical
inter-RAT
MOD
INTERRATHOCOMM RSRP,
handovers
measurement
handover RSRQ, toback ortoboth
reports
GERAN theis
BTS3900, BTS3900 INTERRATHOCOMM Indicates
RSRP
HPLMN.
are and the
sent after the RSRQ.interval The
triggered.
between NO
LTE LST measured
event
For for periodic
details, the RSRP
seehandover
3GPP
MOD
INTERRATHOCOMM measurement
values
to UTRAN are stable,
is reports
triggered.
TS
that 36.331.
are little
sent after an
BTS3900, BTS3900 INTERRATHOCOMM Indicates
varying
For details, thesee quantity
with the
3GPP
intra-frequency
used in the evaluation NO
LTE LST load, and
TS 36.331. therefore
MOD
INTERRATHOCOMM handover
for
thereinter-frequency
is little is triggered.
signal
BTS3900, BTS3900 INTRARATHOCOMM Indicates
The
fluctuation.ofThe
value
Indicates
measurement the
whether interval
this
event all
at which periodical NO
LTE LST parameter
synchronization
A1 or A2.
measured RSRQ Theis also
quantityused
MOD
INTRARATHOCOMM measurement
as
can the
values beinterval
procedures RSRP,
vary reports
repeatedly
with RSRQ,
the
BTS3900, BTS3900 INTRARATHOCOMM are sent
between
initiated
or
loadboth.
andThe after
byA3-related
are UE inter-
an
a measured
likely to NO
LTE LST frequency
inter-frequency
having
RSRP
reflect handover
compatibility
values
the signal are
MOD
INTRARATHOCOMM Indicates
event isof the timer for
triggered.
measurement
problems
stable,
quality
the eNodeB cantocell
varying
the reports.
trigger
little
wait in for
BTS3900, BTS3900 INTRARATHOCOMM For
For
the details,
details,
RRC see
see
connection 3GPP
3GPP
with the
real time.
more load, and
For details,
measurement NO
LTE LST TS
TS 36.331.
36.331.
reconfiguration
MOD therefore
see 3GPP
Indicates
reports there
to the TSperiod
determine is little
36.331.
INTRARATHOCOMM procedure. If this
BTS3900, BTS3900 INTRARATHOCOMM signal
during
whether fluctuation.
to performThe
which a
parameter
measured
synchronization is set to
RSRQ NO
LTE LST coverage-based inter-
INTRARATHOCOMM CFG,
values
Indicates
procedures
frequency allvary the withlocal
repeatedly
handover theID
BTS3900, BTS3900 LST CELLACCESS synchronization
load
of and
thethe
initiated
after cell.
by are
eNodeB likely
UE to
Ita uniquely
procedures
reflect the repeatedly YES
LTE MOD CELLACCESS identifies
having
receives aasignal
cell
compatibility within a
initiated
quality
BS.
problems
measurement ofby the a
do not UE
cell
report.in
BTS3900, BTS3900 MOD CELLACCESS having
real time. compatibility
trigger the RRC For details, NO
LTE LST CELLACCESS problems
see 3GPPdo
connection TSnot 36.331.
Indicates
trigger the
reconfiguration theRRC local
BTS3900, BTS3900 MOD CELLOP
ADD CELLACCESS tracking
connection area identity
procedure. Multiple NO
LTE LST
DSP CELLACCESS of the cell,
reconfiguration which
synchronization
Indicates the local an ID
CELLBROADCASTCN uniquely
procedure.
procedures identifies
If this
BTS3900, BTS3900 of the cell.the
Indicates
operator's
parameter Itinitiated
uniquely
record
is set toof
by
OPERATOR a UE having YES
LTE identifies
percentage
tracking
NOT_CFG, a
areaof cell
all within a
LST CELLOP
ADD CELLOP compatibility problems
base
activatedstation.
information
synchronization UEs served
within a
BTS3900, BTS3900 MOD CELLOP
LST CELLOP within the period
ADD
RMV CELLOP by
cell.the
This
procedures operator
parameter
repeatedlyin a is YES
LTE MOD CELLOP specified
cell when byinter- this
CELLRESELCDMA20 used only
initiated by trigger
parameter in the
a UE only
RMV
ADD CELLOP
BTS3900, BTS3900 00 CELLOP frequency
eNodeB
having
one RRC and load
compatibility is
connection
MOD CELLOP
LST balancingfrom
different
problems andthe
trigger RAN the NO
LTE reconfiguration
LST CELLOP
CELLRESELCDMA20 sharing
tracking
RRC
Indicates are
area
connectionthe enabled.
identity
local ID
ADD procedure.
Modifications on this
BTS3900, BTS3900 00
CELLRESELCDMA20 configured
of the cell. Itinuniquely
reconfiguration the
parameter YES
LTE MOD
00 tracking
procedure.
identifies a affect
area cell the a
listwithin
on
CELLRESELCDMA20
ADD percentage
Indicates
the
BS. MME. of
whether to
MOD Indicates
activated the
UEssize served of
BTS3900, BTS3900 00
CELLRESELCDMA20 set the search window
CELLRESELCDMA20 the CDMA2000 NO
LTE RMV
00 by
size. For details,search
operators. see
00 window,
ADD
CELLRESELCDMA20
MOD 3GPP TSand 36.331. can be
BTS3900, BTS3900 LST Indicates
used to assist
Indicates whether
whether in to the
CELLRESELCDMA20
00
CELLRESELCDMA20
CELLRESELCDMA20 NO
LTE configure
searching
network the network
for the dual-
supports
00
00
00
ADD capability
neighboring
receiver enhanced of pilots.
dual- For
MOD
LST
BTS3900, BTS3900 CELLRESELCDMA20 receiver
details,switched
circuit enhanced
see 3GPP TS
CELLRESELCDMA20
CELLRESELCDMA20 NO
LTE 00 circuit
36.331.switched
fallback (CSFB) to
00
00
MOD fallback
CDMA2000 (CSFB). 1xRTT. ForIf
BTS3900, BTS3900 LST
CELLRESELCDMA20 details, see
this parameter is set 3GPP TSto NO
LTE CELLRESELCDMA20
00 36.331.
BOOLEAN_TRUE, the
00
LST Indicates the local ID
BTS3900, BTS3900 LST
CELLULPCCOMM network
of the cell. supportsIt uniquely dual-
CELLRESELCDMA20 receiver YES
LTE MOD identifiesenhanced
Indicates athe cell within a
00
MOD
CELLULPCCOMM CSFB
BS. to CDMA2000
compensation factor
BTS3900, BTS3900 CELLULPCCOMM 1xRTT.
for path For loss.details, It is used
see NO
LTE LST in UL3GPP powerTS 36.331.
control.
CELLULPCCOMM For details, see 3GPP
TS 36.213.
SION,
compression
ENHANCED_COMPR is used in
RRU
ESSION, cascading or NULL.
scenarios
The value to improve
the cascading
NO_COMPRESSION
Indicates the
Indicates
specifications
indicates the reference
that target
without
CPRI UE
signal
transmit powerpower for the
changing
compression
headroom the CPRI
is
for the by not
MOD PUCCH
data
used, rate.
the expected
Thisserving
value
BTS3900, BTS3900 CELLULPCCOMM sector
the device
eNodeBcan on be set
ADD parameter
NORMAL_COMPRES
the cell. This NO
LTE LST
EUCELLSECTOREQ Indicates
condition
to the
that nominal
normal
SION
parameter indicates takes that
MOD
CELLULPCCOMM
M P0 value
demodulation
NO_COMPRESSION,
normal CPRI
of the caneffect be
BTS3900, BTS3900 CELLULPCCOMM
ADD only
PUSCH. when the
IttheisFor used in
LST performed.
NORMAL_COMPRES
Indicates
compression details,
reference
is used, NO
LTE LST
EUCELLSECTOREQ MultiRruCellFlag
UL power control. For
EUCELLSECTOREQ see
SION,
signal 3GPPpower
ENHANCED_COMPR TS of 36.213.
the cell
CELLULPCCOMM
M parameter
Indicates
details, see theis3GPP
set
local tocell
TS
M ENHANCED_COMPR
sector
ESSION
BOOLEAN_TRUE device.
indicates The that
and
BTS3900, BTS3900 DSP identity.
36.213. It uniquely
MODEURTWP ESSION,
value
enhanced
Indicates 32767 orCPRI NULL.
indicates YES
LTE LST the athe
MultiRruCellMode
identifies cell IDwithin
of the
EUCELLSECTOREQ The
that
sector
parametervalue
this
compression reference
device is setisthatused,
to
ADD
EUCELLSECTOREQ an eNodeB.
BTS3900, BTS3900 M NO_COMPRESSION
signal
and
serves
SFN orpower
NULL the indicates
cell,it
EUCELLSECTOREQ
M
RMV indicates that CPRIaisIn YES
LTE parameter
that
uniquely this parameter
CELL_COMBINATION is invalid.
identifies
M
MOD
EUCELLSECTOREQ
ADD compression is not an
ADD
MOD
EUCELLSECTOREQ .this
invalid.
sector case, device the within
Enhanced
BTS3900, BTS3900 M
EUSECTOREQMGRO
EUCELLSECTOREQ used,
reference
CPRI the
this compression
eNodeB.
If value
parameter power
signal is setis
EUCELLSECTOREQ
M
DSP
UP EURTWP NORMAL_COMPRES NO
LTE M of
an the
to 0, cellreference
enhanced
the equals the
capability
M
RMV
ADD SION indicates
ADD
ADD
MOD
LST
value
of normal
signal of the
power CPRI that
BTS3900, BTS3900 EUCELLSECTOREQ
EUSECTOREQMGRO
EUSECTOREQMID2G
EUCELLSECTOREQ normal
PDSCHCfg
compression CPRI parameter.
and
EUCELLSECTOREQ
EUCELLSECTOREQ
M
UP headroom for the not NO
LTE ROUP
M compression
For details,
supported by see is
TDD used,
3GPP
M
M
ADD sector device serving
LST
MOD
LST ENHANCED_COMPR
TS
cells.36.213.This
the cell The CPRI to
is subject
BTS3900, BTS3900 EUSECTOREQMID2G ESSION
LTE
EUSECTOREQMGRO
EUCELLSECTOREQ
EUCELLSECTOREQ
ROUP the powerindicates
parameter
compression is valid
type must
headroom that
only NO
UP
M
M enhanced
when
be the a
configuredthesame CPRI
multi-RRU for
in local
the cell cell
LST Indicates
compression is used,
LST
LST works
sectors
PDSCHCFG in SFN
using MOor
the cell
BTS3900, BTS3900 EUSECTOREQMGRO identity.
Indicates
and NULL Ittheuniquelygroup
indicates ID
EUSECTOREQMID2G
EUCELLSECTOREQ
ACT CELL combination
same
rather RRU
than mode.
chain
the that YES
LTE UP identifies
of
thatthe sector
this a cell
parameter within
devices is
ROUP
M
ADD CELL is connected
parameter to LBBPd
setting.
ADD
LST
MOD
ADD CELLBAND
an
that eNodeB.
invalid.
boards, serve the
Enhanced
while cell,itIf
different
BTS3900, BTS3900 this parameter is set
EUSECTOREQMID2G
EUSECTOREQMID2G
EUSECTOREQMGRO
BLK CELL uniquely
CPRI
CPRI identifies
compression
compression aisto YES
LTE ROUP a non-zero value, the
ROUP
UP
DEA CELL group
an
types of sector
enhanced
can be ID capability
used for
ADD
RMV
MOD reference
Indicates
devices signal
the
within anof power the
BTS3900, BTS3900 RMV
DSP CELL of normal
sectors
headroom using CPRI
for the
the
EUSECTOREQMGRO
EUSECTOREQMID2G
EUSECTOREQMGRO sector
eNodeB. device and that not YES
LTE EUSECTOREQMGRO
DSP CELLPHYTOPO compression
same
sector RRU
device chain serving that
UP
ROUP
UP serves the cell.
UP
DSP supported
is connected
the cell is subject by to TDDto
MOD
LST
RMV Indicates whether the
BTS3900, BTS3900 RMV
CELLULCOMPCLUST cells.
UBBPd The
the parameter CPRIsetting
boards. When
EUSECTOREQMGRO
EUSECTOREQMID2G
EUSECTOREQMGRO cell is a closed NO
LTE EUSECTOREQMID2G
ER compression
the
rathervalue than ofthe type
thispower must
UP
ROUP
UP Indicates
subscriber thegroup local ID
ROUP
DSP PRIBBPADJUST be the
parameter
headroom same for
is changed,
configured
BTS3900, BTS3900 LST
RMV of the
(CSG) cell.
cell. ItA uniquely
CSG cell
LST CELL sectors
the
in the using
cellPDSCHCFG
corresponding the YES
LTE EUSECTOREQMGRO
EUSECTOREQMID2G identifies
has a
restrictions cell within
on UE a
LST CELLBAND same
to
MO. RRU
this sector are chain that
UP
ROUP BS.
access.
ADD
MOD CELL
CELL is connected to LBBPda
automatically It broadcasts
BTS3900, BTS3900 Indicates
specific
boards, CSG the name
while ID in the
different of
MOD CELL
RMV CELL reactivated. NO
LTE the
SIB cell.
LST
RMVCELL
CELLBAND Thisand
CPRI only those
compression
parameter is used
ADD
STR CELL UEs
types of
only when be
canthe groupusedcan for
BTS3900, BTS3900
MOD
ADD CELL
CELL
CELLRFLOOPBACK access
sectors
Indicates the
using
MultiRruCellMode the CSG the cell.
is NO
LTE
LST
STR CELL
ADD CELLBAND
CELLSELFTEST BOOLEAN_FALSE
same
set to RRU
frequency
Indicates SFNthe chain
or
band ULinthat
BTS3900, BTS3900 LST
STR CELLBAND
PRIBBPADJUST indicates
is thethat
connected
CELL_COMBINATION
which cell tothe cell
EARFCN of the cell. It NO
LTE MOD CELL
UBL CELL is not
UBBPd
, and
operates.
is a CSG
boards.
the value
optional, For cell,ofWhen
details
depending and
this
BOOLEAN_TRUE
the value
parameter of this
depends
RMV
DSP CELLBAND
ADD CELL about
on thethis
Indicates
indicates
setting parameter,
the
whether ULof the toon
BTS3900, BTS3900 LST CELL
PRIBBPRESINFO
MOD CELL UL 3GPPthat
parameter
the EARFCN
see sector.
bandwidth
configure the
is
When
TS
of
the
changed,
the36.104.
uplink
cell
this
cell, NO
LTE is
the a cell
CSG
parameter
configuration cell.
corresponding
istheset
indicatortothe
LST CELL which
EARFCN
Currently, is basedof
Huawei oncell.
ADD CELL to this
NULL,
Indicates sector
the
(UlEarfcnCfgInd). CPRI
the are
DL If the
BTS3900, BTS3900 number
eNodeBs ofdo resource
not
automatically
compression type
LTE
MOD CELL bandwidth
value
blocks
support
of this
(RBs).
CSG
of The of
the
parameter
cells.
cell, NO
reactivated.
carriers
which is depends
based on
LST CELL is not
value
Indicates
This the DLon
specified,
CELL_BW_N25
parameter
the
is used
the
ADD CELL the
numbervalue
default ULof ofresource
BTS3900, BTS3900 indicates
EARFCN
only when
aof the cell. is
EARFCN
cell
MOD CELL CPRICompression.
blocks
used,
bandwidth (RBs).
which is25The NO
LTE For details,ofsee
MultiRruCellMode
RBs.
the is is
LST CELL When
value
calculated
The this
CELL_BW_N25
value parameter
based on
ADD CELL 3GPP
set to TS
SFN 36.104.
or
BTS3900, BTS3900 set to
DLany
indicates
the
CELL_BW_N50 aother
EARFCN. cell value, For
MOD CELL CELL_COMBINATION
Indicates NO
LTE the sector
bandwidth
details,
indicates see athe
CPRI
of ID
25 of
3GPP
cell RBs. the
TS
LST CELL ,The
and
E-UTRAN the
compression
36.104. value
value of type cell. of
The this
of
ADD CELL bandwidth 50 RBs.
BTS3900, BTS3900 parameter
combination
carriers
CELL_BW_N50 dependsdepends
ofbetween
this on on
MOD CELL The mapping NO
the sector.aofand
parameter
the When thethis
LTE
LST CELL the value
indicates
parameter cellvalue
parameter
eNodeB
bandwidth IDof
SectorCpriCompressio is set
forms
50cell tothe
RBs.
ADD CELL and the actual
BTS3900, BTS3900 NULL,
E-UTRAN
n. mapping
The the CPRI
cell identity.
between
MOD CELL bandwidth (that is, the NO
LTE compression
The
the combination
parameter typeofofthe
LST CELL number of RBs)value can
ADD CELL carriers
E-UTRAN
and the depends
Indicates actualcell
the cellon
identity
physical
BTS3900, BTS3900 be deduced similarly.
the
and value
theFor PLMNof(that
LTE
MOD CELL bandwidth
cell
For ID.
details, seeidentity
details, is, the
3GPP see NO
LST CELL CPRICompression.
forms
number
3GPP the
TS of ECGI.
RBs)
36.331. For
can
TS 36.104.
When
details,
be deduced this
seeparameter
3GPP
similarly. TSis
set to
36.413. any other
For details, see 3GPP value,
the 36.104.
TS sector CPRI
compression type of
carriers depends on
the value of
SectorGroupCpriComp
Indicates the duplex
mode of the cell.
ADD CELL
BTS3900, BTS3900 CELL_FDD indicates
MOD CELL NO
LTE the FDD mode,
Indicates the ratio and of
LST CELL
ADD CELL CELL_TDD
UL subframes indicates
to DL
BTS3900, BTS3900 Indicates the
MOD CELL the TDD mode.
subframes
Indicates the in specific
a TDD
ratio NO
LTE
LST CELL frequency
cell. For offset
details, ofofthe
see
special
serving UL
cell. subframes
This
ADD CELL Indicates
3GPP TS the
36.211.first
BTS3900, BTS3900 to special
parameter DL
issequence,
contained
MOD CELL logical root NO
LTE subframes
in the measurement
Indicates in
the speeda TDD
LST CELL which is details,
used to see
ADD CELL cell.
control
flag For information
of the cell. Set and this
BTS3900, BTS3900 generate
3GPP TS to the preamble
36.211.
MOD CELL is related
parameter
sequence. Each to the NO
LTE
LST CELL handover
logical rootdifficulty
ULTRA_HIGH_SPEED sequence
ADD CELL between
if the cell the is usedserving
BTS3900, BTS3900 corresponds to a to
MOD CELL cell
provideand coverage
the for NO
LTE physical root
LST CELL neighboring cell.
ADD CELL
an ultra-high-speed
sequence. For theFor
BTS3900, BTS3900 details,
mappingsee
railway. Set
between3GPP
this TS
MOD CELL 36.331. NO
LTE parameter to
logical root sequences
LST CELL
ADD CELL HIGH_SPEED
Indicates
and physical whether root if theto
BTS3900, BTS3900 Indicates
cell is used
configure
sequences, the to radius
bandwidth
see provide
3GPP of
MOD CELL NO
LTE the cell.
coverage
customization
TS 36.211. for the for a high
LST CELL
ADD CELL way. Set this
cell. Bandwidth
Indicates the
BTS3900, BTS3900 parameter
LTE
MOD CELL customizedtoULiscell
customization NO
LST CELL LOW_SPEED
available
bandwidth. only in other
when
Bandwidth
ADD CELL scenarios.
the bandwidth
Indicates the is 5
BTS3900, BTS3900 customization is
MOD CELL MHz,
customized10 MHz, DL 15cell NO
LTE available only when
LST CELL MHz,
bandwidth.or 20 MHz.
Bandwidth
ADD CELL the bandwidth is 5
BTS3900, BTS3900 customization
MHz, 10 MHz, is 15
MOD CELL NO
LTE available
MHz, or 20 only MHz. when
LST CELL
ADD CELL the bandwidth
Indicates whether is 5 to
BTS3900, BTS3900 MHz, 10 MHz, 15 the
MOD CELL enable or disable NO
LTE MHz, or 20 MHz.
LST CELL multi-RRU cell feature.
ADD CELL
BTS3900, BTS3900 Indicates the type of
MOD CELL NO
LTE the multi-RRU cell.
LST CELL Indicates the
ADD CELL Indicates
compression the rationumber of
BTS3900, BTS3900
MOD CELL of sector devices
data transmitted on that the NO
LTE
LST CELL serve
Indicates
CPRI port an SFN theovercell.
ADD CELL
BTS3900, BTS3900 transmission
Ethernet for an and MPRU
MOD CELL NO
LTE reception mode
aggregation cell.ofData the
LST CELL
ADD CELL cell.
compression on the
BTS3900, BTS3900 Indicates
CPRI portthe
Indicates theover user
ID of the
MOD CELL NO
LTE label of the
Ethernet operator
eNodeB cell.
reduces the
LST CELL
ADD CELL bandwidth
group that sharesof LTE the data
BTS3900, BTS3900
MOD CELL on
cell.theThis
Indicates Ethernet
the cable
parameter NO
LTE
LST CELL between
must
frequencybe set the RHUB
to
band a invalue
ADD CELLBAND and MPRUs,
BTS3900, BTS3900 within
which the cellandof 0
range
LST CELLBAND therefore
and 5 if the the Ethernet
eNodeB YES
LTE operates.
Indicates For
the IDdetails
of the
RMV CELLBAND cable
works supports
in hybrid more
RAN
ADD about this
baseband equipment parameter,
BTS3900, BTS3900 ADD CELL carriers
sharing
see 3GPP
serving ofcell.
amode. different
TS 36.104.This
MOD CELL
SFNAUXRESBIND RATs. The parameter NO
LTE parameter
When
Indicates thisthe must
parameter
ID of bethe setis
LST
LST CELL values 2_TO_1
ADD
to
set 255
sectorto 255,
device,it the and
(indicating an
BTS3900, BTS3900 SFNAUXRESBIND 3_TO_1
invalid
baseband indicate
value) in ratios
equipment
SFNAUXRESBIND uniquely identifies a YES
LTE MOD of 2:1 and
independent
serving 3:1,
a cell is RAN not an
MOD sector device within
SFNAUXRESBIND respectively.
sharing
specified. mode,In this RAN
BTS3900, BTS3900 ADD
SFNAUXRESBIND eNodeB.
Indicates the ID of the
RMV sharing
scenario, withthe dedicated
LTE YES
LTE SFNAUXRESBIND
RMV
SFNAUXRESBIND Indicates
main eNodeB. the local cell
MOD carriers,
identity oforaprocessing
baseband RAN
cell of the
SFNAUXRESBIND sharing with common
BTS3900, BTS3900 SFNAUXRESBIND
LST units
main (LBBPs)
eNodeB,it serving
ADD carriers.
a cell areidentifies
selected a YES
LTE RMV
SFNAUXRESBIND uniquely
SFNAUXRESBIND
SFNAUXRESBIND among
cell within all theLBBPs mainin
BTS3900, BTS3900 MOD
LST the eNodeB,
eNodeB. and the
NO
LTE SFNAUXRESBIND
SFNAUXRESBIND LBBPs to which the
LST cell's serving RRU is
SFNAUXRESBIND connected are
preferentially selected.
When this parameter is
set to a value other
than 255, the cell is
served by LBBPs in
Indicates the local ID
ADD SFNCELLBIND
BTS3900, BTS3900 of the cell.the
Indicates It uniquely
number
LST SFNCELLBIND YES
LTE identifies
of high-band a cell within a
resource
RMV SFNCELLBIND
ADD SFNCELLBIND BS.
blocks (RBs) that the
BTS3900, BTS3900 Indicates
E-UTRANthe IDcan
cellnumber of the
RMV SFNCELLBIND YES
LTE DSP auxiliary
of
sharelow-band
with eNodeB. resource
GERAN
LST SFNCELLBIND Indicates the and localLTE ID
CELLCSPCSTATUS blocks
cells in (RBs)GSM that the
BTS3900, BTS3900 of the cell. cell
E-UTRAN It uniquely
can
LST CELLCSPCPARA dynamic spectrum YES
LTE identifies
share
sharing. with a GERAN
The cell gains within that
MOD
MOD an
cells eNodeB.
Indicates
an in GSM
E-UTRAN whether and
cell LTE to
can
BTS3900, BTS3900 CELLCSPCPARA
CELLCSPCPARA dynamic
enablehave
obtain CSPC spectrum in the
a positive NO
LTE sharing. The gains that
LST CELLCSPCPARA cell.
correlation
Indicates the local with theID
BTS3900, BTS3900 LST CELLDSS an
number
of E-UTRAN
the cell.of RBs It cell
uniquelythat can
Indicates
obtain
the have
E-UTRAN theaoffset positive
cell of YES
LTE MOD CELLDSS identifies
Indicates
a neighboring athe cell offsetwithin
cell's of
correlation
shares
an eNodeB. with with
GERAN the
a neighboring
signal
number level that
of RBs that cell's
BTS3900, BTS3900 MOD CELLDSS cells.
signal Currently,
level that GSM
triggers
the E-UTRAN event A3
cellused NO
LTE LST CELLDSS and
triggersLTE dynamic
event A6 used
in GSMwith
Indicates
shares
spectrum and the LTE
signal
GERAN
sharing to
BTS3900, BTS3900 MOD CELLDSS in GSM
dynamic
interference
cells. andspectrum
Currently, LTE
plus GSMnoise
supports
dynamic one third of
spectrum NO
LTE LST CELLDSS Indicates
sharing.
ratio
and
the (SINR)
LTE
E-UTRAN thethreshold
Measurement
dynamic signal
cell to
sharing.
interference
reports forMeasurement
thisplus noise
for determining
spectrum
bandwidth
reports for to beevent
sharing
this
that
event
BTS3900, BTS3900 MOD CELLDSS ratio
A3
UEs are
supports
shared (SINR)
reported
located
with oneGERAN threshold
at third of if
only
short
A6 are reported only NO
LTE LST CELLDSS for
the determining
signal
distances
the
cells. E-UTRAN
However, level
away that
of
cellfrom
to at if
Indicates
the
UEs
least
the signal
located
one
cell
bandwidth centerthe
quality
atsignal
neighboring
to be of
can use to
at
BTS3900, BTS3900 MOD CELLDSS mitigate
interference
least one the plus
neighboring noise
medium
cell
shared is
resource
interferencebetter
withdistances
blocks than
GERAN
from that
(RBs) NO
LTE LST CELLDSS ratio
cell
away
of
in is(SINR)
the
cells. better
from
local
shared
However, the threshold
than
cell cell
by
spectrum
to that
this
GERAN
for
of determining
the cells,
secondary it is
that
center
offset.
when
mitigate
recommendedGLcan
If this
the use
dynamicparameter
BTS3900, BTS3900 MOD CELLDSS UEs setlocated
serving
resource
is
spectrum
interference cell
ablocks
tobandwidth at that
(SCell)
larger
sharingfrom far(RBs)
the
isin
value, NO
LTE LST CELLDSS shared
distances
carrier
in
the the
enabled.
GERAN
should shared
probability
not Ifaway
aggregation
cells, thespectrum
exceed itoffrom
isUEs
SINR one of
the
(CA)
when cell
reporting
RBs by
GL
in the
recommended center
a quantity
dynamic
this
the E-UTRAN
shared can
thatof
event use
A3
the
BTS3900, BTS3900 MOD CELLDSS fifth
resource
this of
offset. blocks this (RBs)
LTE LST CELLDSS
spectrum
is lower.
spectrum
shared
cell isIfgreater
sharing
bandwidth
bandwidth. is NO
in the
parameter
enabled.
than or shared If
equal
should not exceed one is
the spectrum
set
to SINRto
the a of
Indicates
when
larger
RBs inGL thethe
value,
NearAreaSinrThd dynamic threshold
the
shared
BTS3900, BTS3900 MOD CELLDSS fifth of the E-UTRAN
LST for triggering
spectrum
probability
spectrum
parameter sharing dynamic
ofgreater
isvalue, UEsthe is NO
LTE LST CELLDSS cell bandwidth.
CELLDYNACBARALG access
enabled.
reporting
than
Indicates
RBs or
can beclass
If
equalthis
the the (AC)
to
localSINR
event
scheduled the A6
cell of
Indicates
barring
RBs
is in
lower.
Indicates in
the
MiddleAreaSinrThd the
the
thesharedthreshold
cell.
statistic This
BTS3900, BTS3900 OPARA ID.
by It
UEs uniquely
located at
for canceling
threshold
spectrum specifiesdynamic the YES
LTE MOD
MOD period
parameter
identifies
short
access distances
classais
of dynamic greater
value,
cell (AC)
the
within
away
CELLDYNACBARALG
CELLDYNACBARALG proportion
than
access
RBs
an
from or
can
eNodeB. equal
class
the cell of time
to
(AC)
be scheduled
center. the that
BTS3900, BTS3900 OPARA barring
the
barring
by UEs cell in
FarAreaSinrThd
Indicates is
in the
in the
a cell,
located
the cell.
switchat This
during for
OPARA threshold specifies NO
LTE MOD
LST congestion
parameter
which
medium
forcibly the state.the
value,
proportion
distances
entering If the
the theof
CELLDYNACBARALG
CELLDYNACBARALG proportion
proportion
RBs
time
away
low can
that
from
power be
the of
of
the time
time cellisthat
scheduled
cell that
in
BTS3900, BTS3900 OPARA
OPARA the
the
by
the cell
cell
UEs
center. is
is in
in the
located
congestion
consumption themode. at faris
state
MOD congestion state. NO
LTE LST congestion
distances
exported.
When both this switch awaystate isIf the
from
CELLDYNACBARALG
CELLDYNACBARALG proportion
greater
the cell
and than
the center. of time
or equal
functionality that
BTS3900, BTS3900 OPARA
OPARA the cell is
to this parameter
switch in
are set to ON,the value NO
LTE LST congestion
Indicates
within a enters the
statisticstate
switch islow
period for
LST the cell
Indicates the the
local ID
CELLDYNACBARALG less
the
power than
functionality
(specified orby
consumption equal
the of to
the
BTS3900, BTS3900 CELLLOWPOWER
OPARA of
this
low the cell.
parameter
power
DynAcBarStatPeriod It uniquelyvalue
mode as soon as the YES
LTE MOD identifies
within
consumption
parameter), a a cell
statistic mode. within
perioda
MOD
CELLLOWPOWER wait
BS. time for the entering
(specified
The cell can
conditions
the mode by the the
forenter
elapses,
BTS3900, BTS3900 CELLLOWPOWER DynAcBarStatPeriod
ADD low power
triggering
regardless of whether dynamic AC NO
LTE LST parameter), the
SERVICEAREAID2LIS
MOD consumption
barring are
it is within the low met.mode
CELLLOWPOWER conditions for
BTS3900, BTS3900 T
CELLLOWPOWER only
power whenconsumptionthis
canceling dynamic NO
LTE DSP
LST CELLMBMSCFG Indicates
parameter
period. When theis set theto AC
switch ON
LST CELLMBMSCFG
CELLLOWPOWER barring
that
and is
Indicates
functionality are
used
specific met.
to enable
conditions
theswitchlocal cell
is
BTS3900, BTS3900 LST and
are disable
met.
identity.
set to ON It but the
uniquelythis MBMS
function. YES
LTE SERVICEAREAID2LIS identifies
switch is set a cell to OFF, within
T
ADD If
an this switch
eNodeB.
the cell enters the low is set to
BTS3900, BTS3900 MOD
MOD CELLMBMSCFG
CELLMBMSCFG
SERVICEAREAID2LIS ON,
power theconsumption
MBMS
NO
LTE LST
RMVCELLMBMSCFG
T function
mode asissoon enabled, as the
SERVICEAREAID2LIS
LST and the
Indicates
wait time for cellthesupports
ID of
entering
BTS3900, BTS3900 the
LTE
T
SERVICEAREAID2LIS the MBMS
MBMS mode service service.
elapses, areaifIfto a YES
T this
mains input out ofto
which switch
a cell is set
belongs.
RMV OFF, the MBMS
range(Specific
SERVICEAREAID2LIS function
Problem:isAC disabled.
Failure)
T alarm is reported
within the low power
consumption period.
Indicates whether the
P0NominalPUCCH
parameter affects
closed-loop
Indicates the power
offset for
Indicates
control (CL the PC) SRS for the
reporting
power control the uplink
Indicates
PUCCH.
PUSCH the local cell
The
IoT-based
BTS3900, BTS3900 LST CELLPCALGO algorithm,
ID. It uniquely
PucchCloseLoopPcTy which can
power
Indicates
be SINR-basedcontrolthe threshold
SRS YES
LTE MOD CELLPCALGO identifies
pe parameter
measurement a cell within
applies
event.
of the
power
an eNodeB. distance
control
only
This
between to
offsetLTE aorisUEFDDthe and cells.
the
BTS3900, BTS3900 MOD CELLPCALGO algorithm
If this parameter the SRS
is set
difference
eNodeB for between the NO
LTE LST CELLPCALGO power control
to
signal
determining
algorithm quality based of aon the
whether a
NOT_USE_P0NOMIN
neighboring
contention-based cell and
BTS3900, BTS3900 MOD CELLPCALGO converged SINR and
ALPUCCH,
that
preamble of the theby the
serving
sent cell. NO
LTE LST CELLPCALGO RSRP. This parameter
P0NominalPUCCH
A
UE larger
is a value
PRACH false
is dedicated
parameter doesto LTE
BTS3900, BTS3900 MOD CELLPCALGO indicates
alarm.
TDD cells. that
If this a not
parameter
affect CL PC for the NO
LTE LST CELLPCALGO neighboring
is set to 0, the eNodeB cell must
PUCCH.
Indicates
have not
does better If this
thequality
consider local aID for
LST CELLRACHALGO parameter is set to A
BTS3900, BTS3900 of the
reporting
preamble
Indicates cell. the
asIt
the UE uniquely
aevent.
false
MOD USE_P0NOMINALPU YES
LTE identifies
smallerbased
alarm
numbers a cell
value
reserved on within
indicates
thefor
CELLRACHALGO Indicates
CCH, the the
referenceswitches
MOD an eNodeB.
that the
distance.
UEs event
initiating If thiscan be
BTS3900, BTS3900 related
signal towhen
receivedservice
CELLRACHALGO reported
parameter
emergency setapower
iscalls to a NO
LTE differentiation
(RSRP)
neighboring cannot cell aand
inexceed
has cell.
LST CELLRACHALGO non-zero
high-priority
Indicates value
the UEs.
localand the
Ifcell
CellConStaReportSwit
the
worse P0NominalPUCCH
quality. For
BTS3900, BTS3900 LST CELLRACTHD eNodeB
this
ID. parameter
ItIndicates
uniquelydetects that
is insetCL to
ch:
parameter
details, see value the
3GPP TS a YES
LTE MOD CELLRACTHD the
0, nodistance
identifies UE number
a cellis longer is
within
switch
PC for
36.331. used
theThis to
PUCCH. control
than
reserved
BS. this parameter
for cellUEs
whether
parameter the is dedicated
BTS3900, BTS3900 MOD CELLRACTHD value, theemergency
initiating preamble is
DSP congestion
to LTE TDD information
cells. NO
LTE LST CELLRACTHD considered
calls
Indicates and as
high-priority
whether a false to
CELLRFSHUTDOWN is reportedthe
Indicates using the
localvalue IDis
alarm.
UEs.
enable AThe non-zero
or distance
disable RF
BTS3900, BTS3900 LST extended
of the cell. GTP-U
It uniquely
calculated
of this parameter
channel intelligent based on YES
LTE CELLRFSHUTDOWN headers
identifies to the EPC.
the timingathe
represents
shutdown
Indicates cell
advance
the
for the within
switch cell. a
MOD
MOD The
BS. guideline can befor
(TA)
maximum
RF of
channel
Indicates
the remote the UEcontention-
number
intelligent
the weight of
BTS3900, BTS3900 CELLRFSHUTDOWN
CELLRFSHUTDOWN found in documents
based
reserved preamble bethat
LTE LST CELLRICDATA
shutdown
the queue,
interference
related tofor can
the UEs
which EPC is NO
GET the
used eNodeB
initiating
performed
cancellationin emergency
servicein received
the
algorithm. cell
CELLRFSHUTDOWN feature,
Indicates which
the is
local
LST CELLRICALGO for
calls
only the
Indicates and
when
differentiation
If this firsthigh-priority
switch the time
this isweightfromof
turned a
BTS3900, BTS3900 Wireless
identity of Optimization
the cell. It
MOD CELLRICALGO UE.
UEs.
the queue,
parameter
scheduling.
on, the on eNodeB which
isThe is
setPriority.
toaON
value YES
LTE Based
uniquely Flow
identifies
SND used
and inparameter
certain service
of
cellthis
performs
FPIGTPUSwitch:
within anconditions
remote eNodeB. is
BTS3900, BTS3900 CELLRICPCISEQ
MOD CELLRICALGO differentiation
are
used met.
interference
Indicates in calculating
whetherdetection tothe
LST scheduling.
priority of a The
UE value
during NO
LTE LST CELLRICALGO and records
enable the service in call
CELLSERVICEDIFFC of this parameter
Indicates
scheduling
history
differentiation the
record and local
(CHR)
featureiscell
BTS3900, BTS3900 FG used
identity.
therefore
logs if the
Indicates
using in calculating
It
anythe uniquely
determinesweightthe
interference
extended of
MOD priority of a UE during YES
LTE MOD identifies
scheduling
is detected.
the
GTP-U queue, a
header cell
If this
which within
is
CELLSERVICEDIFFC
CELLSERVICEDIFFC scheduling
an eNodeB.
probability
switch
used inisservice and
of
turned this UE.
off, the
containing the FPI
BTS3900, BTS3900 FG
FG therefore
Indicates determines
MOD value. The guideline of
The
eNodeB scheduling
differentiation the
does weight
not NO
LTE LST the scheduling
queue,
probability which
and is
CELLSERVICEDIFFC perform
scheduling.
can be found remote The inpriority
value
CELLSERVICEDIFFC probability
used
of services
interference
this inparameter
serviceof
in this
a queue
detection. UE.
is
BTS3900, BTS3900 FG documents related to
FG Indicates
The ascheduling
differentiation
has
used inpositivethe weight
calculating theof NO
LTE MOD
LST the EPC feature, which
the queue,
probability
scheduling.
correlation
priority
is Wireless which
andThe
with
of a UE during is
priority
value
the
CELLSERVICEDIFFC
CELLSERVICEDIFFC used in service
of services
this
value
scheduling
Optimization ofparameter
thisandinBaseda queue is on
BTS3900, BTS3900 FG
FG Indicates
differentiation the weightthe of
MOD has
used a
parameter.
therefore
Flow positive
in calculating
Priority. This
determines NO
LTE LST the queue, which is
CELLSERVICEDIFFC scheduling.
correlation
priority
parameter
the scheduling
DSCPRemarkSwitch:of aisUE The
with valid value
the
duringonly
CELLSERVICEDIFFC used
of thisin service
parameter is
BTS3900, BTS3900 FG value
scheduling
if
probability
Indicates of this and
of
whether this UE.
to
FG Indicates
differentiation the weightthe of NO
LTE MOD
LST used
parameter.
therefore in the
FPIGTPUSwitch(FPIG
The
enable calculating
scheduling This
determines
DSCP
the queue,
scheduling.
priority
parameter of a which
is The
UE valid is
value
duringonly
CELLSERVICEDIFFC
CELLSERVICEDIFFC the scheduling
TPUSwitch)
probability
Remark-based
used and or priority
service
BTS3900, BTS3900 FG of thisinparameter
scheduling
if
probability
DSCPRemarkSwitch(D
service and
of this is
UE.
FG of services
differentiation
differentiation
used in calculatingin a queue
feature. the NO
LTE MOD
LST therefore
FPIGTPUSwitch(FPIG
The
has
If ascheduling
SCPRemarkSwitch)
positive
DSCPRemarkSwitch determines is
CELLSERVICEDIFFC scheduling.
priority
the scheduling
TPUSwitch) of a The
UEor value
during
CELLSERVICEDIFFC probability
turned
correlation
is
of set to on.
this parameter On, and
When
with
the priority
the is
BTS3900, BTS3900 FG
FG scheduling
probability
DSCPRemarkSwitch(D
of services
DSCPRemarkSwitch and
of
in thisa queue UE.is
MOD value
eNodeB
used
therefore ofcalculating
in this
guarantees
determines the NO
LTE LST The
turned
parameter.scheduling
SCPRemarkSwitch)
has a
differentiatedpositive
on, this
This quality is
of
CELLSERVICEDIFFC
CELLSERVICEDIFFC priority
the
turnedscheduling
probability of
on. a UE
and
When during
priority
correlation
parameter
service
scheduling (QoS) with
indicates
is
and valid the
based only
BTS3900, BTS3900 FG
FG probability
of services
DSCPRemarkSwitch
value
the weight ofservice
this of
in this
of atype UE.is
queue
nonP2P
MOD if
on the
therefore determines NO
LTE LST The
has
turned a
parameter.
service scheduling
positive
on,
queue. this
This
CELLSERVICEDIFFC
CELLSERVICEDIFFC FPIGTPUSwitch(FPIG
specified
the scheduling
probability byand thepriority
DSCP
correlation
parameter
TPUSwitch)
field in the with
indicates
is
IP isvalid theonly
turned
packet
BTS3900, BTS3900 FG
FG probability
of
the services
value weight ofthe thisofof this
in P2P a queue UE.
if
on.
sent by PDN NO
LTE LST The
has
service scheduling
a positive
parameter. queue. This
LST
CELLSERVICEDIFFC FPIGTPUSwitch(FPIG
gateway
Indicates
probability tothe the
and local ID
priority
correlation
parameter
TPUSwitch) with
is isvalid theonly
turned
BTS3900, BTS3900 CELLSHUTDOWN
FG eNodeB.
of
of the
services
value cell. ThisIt
of thisin a queueuniquely
if
on. YES
LTE MOD parameter
identifies
has a
parameter. positivea iscell
Thisdedicated
within a
CELLSHUTDOWN FPIGTPUSwitch(FPIG
to
BS. LTE FDD cells.
correlation
parameter
TPUSwitch)isisvalid with theonly
turned
value
if
on. of this
parameter.
FPIGTPUSwitch(FPIG This
parameter
TPUSwitch)isisvalid turned only
if
on.
FPIGTPUSwitch(FPIG
TPUSwitch) is turned
intelligent
enhanced
applied when power-off
proportional
UEs are of
carriers
fair
out (EPF). in the
of synchronization Thesame MAX
coverage.
C/I
in the
policy uplink. Intelligent
schedules If the
power-off
UEs
switch in is of carriers
descending
turned on, the in
the same
order
eNodeB of average coverage
instructs signal
UEs
can
to use bethe
interferenceperformednon-plusonly
MOD when ratio
noise this parameter
contention-based (SINR). The is
BTS3900, BTS3900 CELLSHUTDOWN set policy
PF
randomto ON
Indicates and specific
whether
access
schedules mode to NO
LTE LST conditions
enable
UEs
upon are met.
delay-based
indownlink
ascending data For
LST
CELLSHUTDOWN Indicates
intelligent
dynamic
order
arrivals of in the
power-off
scheduling
ratiotheof local
type
case theof ID
ofof
BTS3900, BTS3900 CELLULSCHALGO of
the the cell.
inter-RAT
carriers
prioritization
data rate in to
out-of-synchronization.
Indicates It
the uniquely
for
the
whether co-
same VoIP
SINR. to
Indicates YES
LTE MOD identifies
coverage
coverage,
services.
The
If theRR
increase switch athe
cell
If
policy
the cell
each
this
smartwithin
isdurationbasic a
turned
MOD
CELLULSCHALGO preallocation
BS.
shutdown.
cell must
parameter
schedules
off, the
scheduling eNodeBhaveis
each set
request itsUEto in
BTS3900, BTS3900 CELLULSCHALGO for sparsethe
Indicates packets.
If this parameter
intelligent
Indicates
NO_DELAYSCH,
sequence,
instructs
indicator UEswhether
power-off
(SRI) and to istoset
use
false of NO
LTE LST The larger value
scheduling policy for
to
carriers
apply
delay-based
therefore
the upper switch
contention-based
detection each limit
threshold enabled
dynamic
UE has
for
MOD
CELLULSCHALGO between
the initial
Indicates this
PUSCH
the
BTS3900, BTS3900 CELLULSCHALGO
BY_UTRAN_WITHOU
and
control
UEs the
scheduling
an equal
random
parameterin the onUL ordownlink
service
opportunity
access and DL mode
the PRB
data to
transmission
load
T_LOAD,
usage
unit threshold
(SDU)
prioritization
be threshold
scheduled. the that
for of
eNodeB
The aisco-
set
VoIP to NO
LTE LST upon downlink
discontinuous
SmartPreAllocationDur data
detected
coverage
does
0.
services
EPF
arrivals notinis
segmentation
policy asneighboring
obtain
thedisabled.
schedulesatthe
case the ofIf
MOD
CELLULSCHALGO reception
ation
Indicates parameter
discontinuous (DRX)
the uplink state.
is
UTRAN
load
radio
this
UEs status
link
parameter cell
out-of-synchronization.
in offor
control
ascending theisthe co-
(RLC)
set E-to
BTS3900, BTS3900 CELLULSCHALGO If this
selected
load parameter
threshold
transmission as the of is
actual
a co-set
UTRAN
coverage
layer cell to(DTX)
neighboring enter NO
LTE LST to ON,in
VOIP_DELAYSCH,
order
MaksIdxSwitch:
smart
coverage
when
of the
the priority.
preallocation uplink
threshold
neighboring
PuschDtxSwitch
Infor
MOD inter-RAT
Indicates
UTRAN
VoIP
delay-based
EPF,
Indicates thecell,
services co-coverage
the
priority
the threshold
and
dynamic
switch ofshuts
an
CELLULSCHALGO increases
duration
UTRAN
of the for
cell
UlSchSwitchand sparse
for thethe SRI
E-
BTS3900, BTS3900 CELLULSCHALGO cell
of
down shutdown
consecutive
scheduled
scheduling
UE
used is the
to
calculated carrier
control in mode.
cyclic
non-TTI of
reuse
based the
false
packets.
UTRAN
parameter detection
cell is to on. enterIf the NO
LTE LST In inter-RAT
redundancy
E-UTRAN
bundling
prioritization
on
of dedicated
the following modecell cell
check
forbasedand
VoIPthe
probability
inter-RAT
PuschDtxSchStrategy decreases.
co-coverage
MOD
CELLULSCHALGO shutdown,
(CRC)
on only
maximum
services
factors:
preambles errors
the
theisSDU the
load ineNodeB
enabled.
between
data the
status
rate,
If this
cell parameter
shutdown
parameter is setmode. is set
to
BTS3900, BTS3900 CELLULSCHALGO hands
uplink
of the
segments
Scheduling
average
UEs. If over
above
E-UTRAN
the SINR,at orthe redirects
which
priorities
switch cell.
RLC the
LTE LST
to
In
UEs
OFF,
inter-RAT
NEW_TX,
eNodeB
If this
layer. in the
both
stops
parameter cell isisset
initial
E-UTRAN
the QoS- NO
are dynamically
satisfying
turned
threshold on,and data
the eNodeB
rate for
the
MOD
CELLULSCHALGO shutdown,
transmission
cell
to
If thistoservice,
scheduling the
a co-coverage
parameter the eNodeB
instead is setof
adjusted
each
enables
probability based
reuse remain and
of on
BTS3900, BTS3900 CELLULSCHALGO hands
retransmission
neighboring
abnormal over
BY_UTRAN_WITH_L
to 0, the UE.
upper orUTRAN redirects
is
The
limit
VoIP
service
dedicated
unchanged. packetdifferentiationdelays
preambles NO
LTE LST UEs
performed
cell
OAD,
control inthe
when
parameter the
on E-UTRAN
when
related
value
eNodeB
SDU theon
range
MOD during
requirements
among uplink
UEs dynamic
basedof the
CELLULSCHALGO cell
initial
is toPUSCH
conditions
from
obtains
segmentation a6theco-coverage
to are
120.
load met:
at status
the
BTS3900, BTS3900 CELLULSCHALGO scheduling,
UE.
the MaskIndex
The MAX therebyC/I, PF,
neighboring
transmission
The
of
RLC the inter-RAT
co-coverage
layer is UTRAN
is cell
disabled NO
LTE LST
LST increasing
and
parameter.
RR policiesthe
If themean are
cell when
detected
shutdown
Indicates
neighboring
in the uplink as related
the DTX.
switch forload
UTRAN VoIPisIf the
the
INTERRATCELLSHUT
CELLULSCHALGO opinion
basic
switch
Indicates ULis score
turned
scheduling
the (MOS)
local off,
conditions
PuschDtxSchStrategy
enabled,
threshold
cell,
servicesandof the
of
shuts are
scheduled met:
asupported
co-
down
BTS3900, BTS3900 DOWN and
policies
eNodeB
identity
The
system
inter-RAT and
allocates
the capacity
cell.
cell aItin
MOD parameter
ShutDownType
coverage
the
for
by carrier
non-TTI
VoIP
dedicated
the is set
neighboring
of
bundling
eNodeBservices
preamblethe by to
E-
when to YES
LTE MOD uniquely
shutdown
ADAPTIVE_RETX,
parameter identifies
switch
isbasedset isaon
to
INTERRATCELLSHUT
INTERRATCELLSHUT GERAN
UTRAN
mode.
the
only
cell cell
default,
Indicatesone
within iscell
cell heavily
whereas
UEthe
an for
atswitch
athe
eNodeB. the
time. E-
enabled,
adaptive
BY_UTRAN_WITH_L
UTRAN
the load theto enter
cell
status of
BTS3900, BTS3900 DOWN
DOWN If
EPFthis
loaded
used parameter
BackOffSwitch:
policy
to
ShutDownType
with
enable isVoIP orisboth
intended set
MOD retransmission
OAD
inter-RAT
the
to or
E-UTRAN
acommercial
non-zero
services. co-coverage is
cell
value andX, NO
LTE LST for
disable
Indicates
parameter inter-RAT
theis switch
set use.to joint for
INTERRATCELLSHUT
INTERRATCELLSHUT performed
BY_UTRAN_AND_GE
cell
the
upper shutdown
neighboring
shutdown.
backoff limit
control. when
control mode.
If the on
the
BTS3900, BTS3900 DOWN BY_UTRAN_WITH_L
initial PUSCH
RAN_WITH_LOAD,
In inter-RAT
UTRAN cellon, at
DOWN SDU
switch
OAD or iscell.
segmentation
turned NO
LTE MOD
LST transmission
the
If
the shutdown
shutdown,
this
RLC
backoff parameter
layer
control the isiseNodeB
isis set
INTERRATCELLSHUT
INTERRATCELLSHUT BY_UTRAN_AND_GE
detected
conditions
shuts
to
enabled down as
and DTX.This
including
the a carrier
enabled.
PucchSwitch:
RAN_WITH_LOAD, If the switch
BTS3900, BTS3900 DOWN
DOWN parameter
the
of specified
the E-UTRAN
BY_GERAN_WITH_L
maximum
is turned off, does
of Xinter-RAT
SDU
backoff not
cell
MOD Indicates
the
apply shutdown
to LTE whether TDD. to NO
LTE LST cell
when
OAD, shutdown
segments related
the eNodeB
that duration,
INTERRATCELLSHUT control
enable
conditions is PUCCHbe
disabled.
the including can
INTERRATCELLSHUT the number
conditions
obtains
divided the
for
UeRaInforInqSwitch: areof UEs
load
VoIP met: status
BTS3900, BTS3900 DOWN resource
the specified adjustment inter-RAT
DOWN served
The
of the
services
Indicates by
inter-RAT
co-coverage
in the
uplink
whether E-
cell the NO
LTE MOD
LST algorithm.
cell shutdown duration,
UTRAN
shutdown
neighboring
dynamic
query of cell, switch uplink
GERAN
scheduling
UE random is in
INTERRATCELLSHUT
INTERRATCELLSHUT If
thethis
numberoption of is UEs
and
enabled,
cell,
non-TTI
access downlink
and the
shuts
bundling
information RB down
BTS3900, BTS3900 DOWN
DOWN selected,
served
usages
ShutDownType
the
mode. carrier by PUCCH
inIfthe the
of E- E- is
E-
the NO
LTE LST
LST enabled.
resourcecell,
UTRAN this
adjustment uplink switchis
RRUJOINTCALPARA UTRAN
parameter
UTRAN
is turned
Indicates cell,
cell
on,
theisbasedset
the
local to
query on
ID
INTERRATCELLSHUT initiated
and downlink when the
RB
BTS3900, BTS3900 CFG allocation/retention
BY_GERAN_WITH_L
the
of UE load
the random
cell. status It of
access
uniquely both
DOWN PUCCH
usages resources are
LTE MOD
MOD
priorities
OAD
the
information
identifies or in(ARPs)
E-UTRAN
insufficient
the E- cell
is enabled,
awhether
cell
or
ofand
within
YES
Indicates
UTRAN
services
BY_UTRAN_AND_GE
the
Indicates
neighboring cell,
in the theswitch E-sends TX
RRUJOINTCALPARA
RRUJOINTCALPARA and
an the
eNodeB.
excessive. eNodeB
channel
RAN_WITH_LOAD,
GERAN
used calibration
allocation/retention
UTRAN cell are or is
met,
BTS3900, BTS3900 CFG
CFG If this to
the
enabled
priorities optionenable
cell. is not
in(ARPs)a cell with
ofthe NO
LTE LST and
the
disable uplink
shutdown
If this parameter
change
UEInformationRequest and inis set
selected,
combined
services in PUCCH
RRUs
the E- and
LST
RRUJOINTCALPARA downlink
Indicates
conditions
to
cell-specific
message load
the
to including
SRS
the ofUE
local the ID is
resource
four
UTRAN TXcell. adjustment
antennas.
cell
BTS3900, BTS3900 CELLALGOSWITCH
CFG neighboring
of
the the
specified
BY_UTRAN_AND_GE
subframe
complying
disabled. It are
withUTRAN
uniquely met,
inter-RAT
configuration 3GPP
and
cell uplink
are less and than YES
LTE MOD identifies
shutdown
RAN_WITH_LOAD,
(that
Release is, the aand
9load cell within a
duration
adjustment
MOD
CELLALGOSWITCH
PucchFlexCfgSwitch:
downlink
values
BS.
and
the
on theno
eNodeB of
UE
setting served oflater
obtains
of the
the by
Indicates
and requires
Indicates whether the switch
the UE to
BTS3900, BTS3900 CELLALGOSWITCH neighboring
UtranCellUlLoadThd
the E-UTRAN
SrsSubframeCfg
load status UTRAN cell
of are
co-
that
enable is used
reporting PUCCH random to enable flexible NO
LTE LST cell
and
met, are
coverage and
parameter). lessthe than
load
neighboring of a
MOD and
access disable
configuration. information. the ThisActive
CELLALGOSWITCH values
If the of
UtranCellDlLoadThd,
co-coverage
UTRAN switch and is
GERAN turned
BTS3900, BTS3900 CELLALGOSWITCH Queue
The
functioneNodeB Management
doesuses not take the
UtranCellUlLoadThd
respectively. After
LTE LST
neighboring
cells,
on,
(AQM) the
reported
effect and
if algorithm
shuts
algorithm.
an random GERAN
LBBPc downIfall
isthis NO
and
UEs
cell
the isinless
dynamically
carrier the E-UTRAN
than
of adjusts
the thisE-
MOD
CELLALGOSWITCH switch
access
used is set
information
or the cell to ON, the
for
UtranCellDlLoadThd,
cell
UTRAN
the are
parameter
SRS transferred
cell value.
subframe based to
BTS3900, BTS3900 CELLALGOSWITCH AQM
RACH
bandwidth function
resource is 1.4is or on 3
respectively.
the
the neighboring
configuration
load status After
basedof the allon NO
LTE LST enabled
adjustment.
MHz. When to preventIf
PUCCH this or
UEs
UTRAN
E-UTRAN
the in
usage thecell, E-UTRAN
of
cell, the
celloff, the
MOD
CELLALGOSWITCH control
switch
flexible iscongestion.
turned
configuration is
cell
eNodeB are transferred
neighboring
resources. shuts downto
BTS3900, BTS3900 CELLALGOSWITCH The
query
enabled,length
of UE ofUTRAN
frequency- the
random
the
the
cell,
If theneighboring
carrier
andswitch ofisthe
neighboring turned E- isis NO
LTE LST PDCP
access
domain packet
information
uplink queue
ICIC
UTRAN
UTRAN
GERAN
off, the cell,
cell.
algorithm
cell. the
CELLALGOSWITCH maintained
disabled.
and uplink Thefrequency a uses
at eNodeB
eNodeB
the initial shuts
configuration down
relatively
uses
hopping small value
the scheduling
self-collected
the
and carrier
does notof the
perform E-
to help
random
cannot achieve
beaccess used. an If this
UTRAN
dynamic cell.
switching.
appropriate
information
option is selected, trade-off
for RACH an
between
resource
equal number of RBs throughput
adjustment.
and time latency.
PRACHFalseAlarmDet
(specified by the If this
switch
Switch:isIndicates
PucchExtendedRBNu set to OFF,
used
used to enable or
switch
is
carrying
to
control
disable LTEtois
turned TDD
is
enable
load
turned
downlink
off,
applied theor
cells.
sharing
on, the
disable
eNodeB
optimized
control
PucchPcDtxSinrSwitch theprioritizes
information check
CQI cells. on
during
with
the
UEs CDMA2000
number
based semi-persistent onof PRBs
the
Indicates
(DCI)
:adjustment
Indicates
scheduling format the switch
algorithm
whether
on 0.the Thisthe
IntraFreqIdleMlbSwitch
used
MBRs
used by
to of GBR
UEs
enable services.
during
or the
cannot
switch
eNodeB
PDSCH,
:downlink
Ifthis
both takes
be enabled.
processes
ensuring effect
If
disable switch
TddMultiplexingCqiAdj
only
measured on FDD scheduling.
dynamic uplink is
cells. turnedpower
SINR If
communication
IntraFreqIdleMlbSwitch
on,
This theparameternumber quality
of
applies
adjustment.
OptSwitch:
an
in FDD
the
(indicated DTX cell by stateIf
Indicates
is this
IBLER) when
and
PRBs
only
switch toused LTE
is turned byTDD existing
on, cells. the
MOD established
the
of switch
PUCCH
VoIP
IntraFreqMlbSwitch services used on
DTX an to in is the
BTS3900, BTS3900 CELLALGOSWITCH GBR
power
control
LBBPc,
detected. services
UeAmbrDlSchSwitch: amplifier
whether
this If switch
this is (PA)
to
switch
Indicates
QPSK
are turned the
modulation on, intra-switch NO
checked
Indicates
working before
whether theaiswhen new
the
LTE LST enable
takes
is turned
related
scheme.
frequency tovoltage
effect
the off,
the
loadoptimized
only
MOD
CELLALGOSWITCH GBR
eNodeB
adjusted
CQI
the
eNodeB cell service
adjustment performs
usesbased
does can
less on
not than be the
frequency-priority-
PhichInnerLoopPcSwit
balancing
BTS3900, BTS3900 CELLALGOSWITCH admitted.
downlink
load
algorithm
four
process of
RX the Iffor
scheduling
antennas
the in this
eNodeB,
ACK
UEs
measured switch in
and
based
ch:
idle Indicates
mode inter-frequency
is enabled. the NO
LTE LST is
based
which turned
multiplexing
normal
uplink on
reduces off,
cyclic
SINR the the
mode.
in power
prefix
the If
DTX
handover.
switch
Otherwise, for PHICH intra-
MOD
CELLALGOSWITCH number
aggregate
consumption
this
(CP)
state switch
in
when of PRBs
the maximum
is
uplink,
the of the
turned usedandPA
FreqPriorIFHOSwitch:
inner-loop
frequency power
idle load
BTS3900, BTS3900 CELLALGOSWITCH by
bit
and
on,
the existing
rateimproves
SrsCfgInd (AMBR).
the optimized GBR energy If this
PUCCH
Indicates
control. DTX the is CQI NO
LTE LST balancing
services
switch
efficiency
adjustment
parameter isIfis the
for
turned
of not the
switch
UEs on,inthe is
MOD
CELLALGOSWITCH
detected.
frequency-priority-
turned
idle
checked
eNodeB
eNodeB.
off,
modeprioritizes is disabled.is
If
during
in
only
Dynamic
algorithm
this the switch
the
BTS3900, BTS3900 CELLALGOSWITCH enabled.
SRSCfg
is
based turned
initial transmit
UtranIdleMlbSwitch: MOIf
on,
inter-frequency this is
the set
switch
power to
admission
UEs
power
Indicates
is based
BOOLEAN_TRUE.
eNodeBturned adjustment
the
off, evaluation
processes onthe the the
switch NO
LTE LST handover
for theGBR
Indicates PHICH theservices. is set. If
switch
of
AMBRs
that the
applies
optimized
Note
measured isthat used during
only the
CQI
uplink to
to FDD
enable
LBBPc
MOD
CELLALGOSWITCH switch.Frequency-
the
used switch
DlLdcSwitch:
downlink
cells
or to
with
disable enable is
scheduling.
a the
turned
bandwidth orSINR
Indicates on,
BTS3900, BTS3900 CELLALGOSWITCH adjustment
does
even
priority-based
the
disable
IndicateseNodeBnot
when load support
switches algorithm
PUCCH inter-
controls
sharing
the
This
no switch
less
beamforming
cannot
PUSCH
DTX parameter
is than
be DTX
detected, used
enabled. 5detection
MHz. to
applies NO
LTE LST frequency
the
with
used physical
UTRAN
toLTE enable handover channel
forthe UEs isin
MOD control
only
algorithm.
Indicates
for UEs
generates to whether
with If
whether
power TDD
the
multi-user to cells.
switch to
CELLALGOSWITCH applicable
transmit
idle
multi-usermode. power when to the
BTS3900, BTS3900 CELLALGOSWITCH implement
EpfEnhancedSwitch:
is
enable
MIMO turned
control on,
(MU-MIMO)
or
commands load
disable UEs controlin
the
eNodeB
enable
MlbLoadInfoSwitch:
beamforming the provides receive dual NO
LTE LST in
the the
Indicates
adaptive
applied.
based cell downlink
on can
For whether
step
the beTDD SINR, of
served ato
cells,
coverage
SINR
Indicates
algorithm. to and
converge
the one
switch to
MOD cell.
enable
by the
adjustment
this If
switch thisenhanced
beamforming switch is
CELLALGOSWITCH and
frequency
the
whether delivers
target
MuBfSwitch: load istakes
SINR. algorithm.
the
preferred
Indicates
of an effect
power
BTS3900, BTS3900 CELLALGOSWITCH turned
proportional
algorithm.
AdaptiveStepVarySwit
only
control when on,
commands the
Ifsubframe
the system
fair switch (EPF) to If
for carrying
PdcchPcSwitch:
inter-RAT
whether to cell services.
enable is innon- NO
LTE LST checks
for
is
ch: downlink
turned
configuration
UEs. This for off,
check congestion
UEs
2 box
or 5 isis
this
Indicates switch the is set
switch to On,
MOD
CELLALGOSWITCH considered
TM9
in
the the
scheduling.
dedicated
adopted. cellmulti-user
downlink
PuschIoTCtrlSwitch: cannot
If to
when
this LTE bepairing
of
switch thefor
the
TDD
the
PDCCH
load
in frequency-priority-
theIfsharing
downlinkpower between control.
for the
BTS3900, BTS3900 CELLALGOSWITCH cell.
cells.If
is turned
Indicates the
AperiodicCqiTrigOptS
served byon,
this downlink
the check
whether the box
to is
based
If
the
cell.the E-UTRAN
If inter-frequency
switch
this option is turned
cell andand NO
LTE LST congested,
Indicates
witch:
beamforming
is
eNodeBselected, Indicates the
adjusts load switch
significant
MOD
CELLALGOSWITCH
enable
handover
off,
the
Indicates
control
used
whether
Indicates
power
inter-RAT
BfSwitch
algorithm. tois
interference
to
will
the
control istrigger
performed.
whether
The cellthe
be
allocated
option
switch is
to of
for
If
changes
aggregation
control
triggered
evenly
performed. in
to
BfAlgoSwitch in
even
PDCCH. the
closed-loop
In level signal
when
inter- of If
BTS3900, BTS3900 CELLALGOSWITCH the
this
whether
aperiodic
enable access
switch
beamforming to CQI
or disable barring
is
enable turned
algorithm or
RAN
quality
the
power
the PDCCH
serving
switch can
control be based
cell for the on NO
LTE LST RAT
parameter
algorithm.
off,
disable the
optimization.
sharing
is load
disabled
detected,
the PUSCH system
the
for Ifis
sharing
and
are turned
this
dynamic
admission
by DTX the does
Ifdefault.
this CQI
on,
MOD
CELLALGOSWITCH PUSCH
provides
power
based
selected, on ina
allocated dynamic
good
non-TM9
load of signal
to the
parameter
not
DRX
switch checkand isbe smart
for isisaset Iftoin
DRX
BTS3900, BTS3900 CELLALGOSWITCH
and
It must
adjustment
detection
scheduling
quality.
PDCCH
inter-RAT
multi-user
scheduling.
ACBAR_SWITCH_DY Ifison, enabled
result.
this
cell,mode.
adjusted
pairing
UE
switch
the
If this
a is
congestion
features.
performing
switch
manually
performed
TDD
SrsPcSwitch: cell is The
turned
isif in
initial
required.
at smart
the
established
aIf on,
large
this NO
LTE LST set
inter-RAT
the
NAMIC, to
dynamically. Off,
downlink the
cell
intelligent ismust be
downlink
DRX
access
step,
on
check anfeature
operators accelerating
LBBPc,
box ofshare
triggers isthe applies cell
PUSCH
selected, data theIf
MOD
CELLALGOSWITCH frequency-priority-
EDlMaxTXPwrSwitch:
a
enabled
UTRAN
access for
barring cell. the If cell.
is both
and
only
aperiodic
channel
IBLER
DTX
SRS the
to TDD
detection
power congestion
CQI
resources
convergence. networks,
control is notisfor If
BTS3900, BTS3900 CELLALGOSWITCH based
Indicates
the
this
enabled. inter-frequency
MlbLoadInfoSwitch
option the
In isthis switch
not
cannot
and
reporting
according
this
supported.
adjusted. thebe
check UE If relieved.
based
tobox must
this the is on
check NO
LTE LST handover
enhanced
Indicates
and
selected,
situation, UtranMlbSwitch is
themaximum
non-TM9
the disabled.
switch
access
MOD During
support
related
specified
cleared,
UlIblerAdjustSwitch:
box is thethe
triggering
the
cleared, calculation
mobility
percentages. CQI SRS
CELLALGOSWITCH The
TX
used inter-frequency
power to enable of the
BTS3900, BTS3900 CELLALGOSWITCH
options
multi-user
probability
of
speed the
conditions
Indicates
adjustment
Indicates
power QoS are
report.
control
pairing
factors
whether
the Ifisor
selected,
satisfaction
afteris switch thecell.
not
for If
in
to
handover
this
disable
the switch
UTRAN
downlink
mobile-originated can
distance-based
is only
turned
cell
is whose be
data NO
LTE LST rate
dynamic
DLMAC
apply
performed
used
adjusted. of to services
MRC/IRC DRX
instance
enable
This at a switchwith
fixed
or
check has is
triggered
off,
handovers.
load
disabled
and thestatus when
maximum
forthe
mobile-originated If
isthe this other
obtainedcell. TX
MOD
CELLALGOSWITCH different
turned
been
adaptation
step.
disable on, QCIs,
established to thedynamic
the for
box
conditions
power
switch
and is
TM9MuBfSwitch:
signaling
DRX
200 is
satisfaction
ms isuplink
dedicated
of
normal
feature and turned
the
are for cellinitial
or
estimation
applies
the on,to
is to
BTS3900, BTS3900 CELLALGOSWITCH PUCCH/PRACH.
DlCqiAdjDeltaOptSwitc
block
LTE
triggering TDD error cells.
inter-rate
determined
distance-based
medium
Indicates
dynamically
method
newly
eNodeB can
admitted
used whether
receives by bethe
adjusted UEs to to NO
LTE LST LBBPc
h:
(IBLER)
Indicates boards
adjustment whether do not
MOD
CELLALGOSWITCH
NearPointUePuschOpt
frequency
reference
handovers
selected
enable
Indicates
based
dedicatedly
reduce
MSG5.
support onTM9
the as
Consider
handovers
signal
whether
the
MRC/IRC
are the
multi-user
signaling
for cell VoIP(RS) to to
load.
that
enableand
algorithm.
Switch:
are
power
allowed. optimization
Indicates
If Ifthis
the thisswitch switch
scaling on
BTS3900, BTS3900 CELLALGOSWITCH candidate
pairing
enable
If this
services
overhead
aperiodic
adaptation the
inisthe
parameter or
CQIcellfunction downlink
ondecrease forisload
the of
set
downlink
is turned
whether
met.FreqPriorIFBlindH
factor
is turned indexestoon,
channel
off, apply IBLER
distance-
Pa and NO
LTE LST sharing
for
avoiding
to the
UE cell.
implemented
the
reporting
Indicates
PUCCH. with
interference
power is
the
The Iftriggered
UTRAN.
this
on
SFN
following If
MOD quality
convergence
optimized
OSwitch:
Pb.
based
Indicates
both
option Ifthe thisindicator
handovers
is closed-loop
Indicates
switch
the
selected target
switch (CQI)
is are
and is
the
CELLALGOSWITCH from
services
consumption.
by
uplink adjacent
ACBAR_SWITCH_ST
invalid
description with
scheduling CQI applies GERAN
the
If the
reports QCI to
BTS3900, BTS3900 CELLALGOSWITCH adjustment.
adjusted
power
frequency-priority-
turned
prohibited.
used to
MlbLoadInfoSwitch
TM9
cells. control
on,
multi-user
Ifstatic tothe
enable
the increase
If this
for or the
ATIC,
of
switch
the 1.cell
dynamic
in
mode. eight If
PrachIrcSwitch a
The
is service
DRX
consecutive
edgeoff, access
uplink the switch
in with
CQI is NO
LTE LST PUSCH
based
maximum
disable
and
beamforming
AvoidGeranInterfSwitc
Indicates to
inter-frequency
the TX
the UEs
UL power
is
SFN near
CoMP of
barring
the
turned
CQI QCI
scheduling
scenarios
adjustment
throughput.reporting is
off,of enabled.
1
the
wheremodes
is is not
dynamic
periods. the aIn
MOD
CELLALGOSWITCH the
blind
the cell
cell
algorithm. handover
UtranIdleMlbSwitch
enabled, center.
can be The
switch.
BTS3900, BTS3900 CELLALGOSWITCH
h
VoIP
DRX
If option
downlink
this
include
eNodeB
calculatedsituation,
cyclic service,
feature
UlEnhancedFssSwitch:
optimization
If this
increased switchtheisTM9
is
redundancy
to
selected,
scheduling
joint
equipped
based the
does
helps
is
multi-
improve set on not
UEs
to
options
user
GL
mode.
access
satisfaction
apply
check
scheduling
with pairing
bufferzone
LBBPcto Theare
probability
(CRC) newly selected,
in
downlink
rate
mode, on
boards the and NO
LTE LST the
Indicates
near
On,
the
the
downlink following
the
RB the
UTRAN
optimization usage the
cell
frequency-
is enabledformula:
cellswitch
center
isor in the
whose tofor
scheduling
factors
calculated
admitted
aperiodic
the
and and
auto-selection
uses UEs.
CQI
one modes
usingaverage The
reports this
two
MOD
CELLALGOSWITCH CQI
used
avoid
Indicates
load
the adjustment
priority-based
cell. This
cell. to
status enable
unnecessaryswitch
the
IfDRX this is switch or
inter-
obtained
option=
has no
is
enabled.
include
access
method
dynamic
fails,
mode
RX the
barring
aperiodicis
between
antennas. lower joint feature
IfCQI than
joint
the
BTS3900, BTS3900 CELLALGOSWITCH (Number
disable
power
frequency
impact
used
and
not to
selected,
is onuplink
loweringofthe
enable
normal blind ACKs load-
TDD
TM9
can due
or for
be to
Before
scheduling
durations
the
applies
reportingactual
scheduling
PrachIntrfRejSwitch selecting
toisor are mode,
value,
CA and
not UEs the and
which only NO
LTE LST initial
based
inter-RAT
handover
20M,
disable
selected
multi-user transmissions
TDD enhanced
theas is 15HMz
GL
pairing theabrupt
enabled. inand x If
MOD switch,
the
configured
affects
when
repeatedly
independent
parameter the pay
auto-selection
the dynamicinattention
cell
triggered
is the
set load to to
CELLALGOSWITCH CQI
frequency
this
10M
dynamic
candidate
the adjustment
interference.
switch
cell.
downlink
following: powerselection.
is
cell If
set
is this
for per
to
sharingload Off,
BTS3900, BTS3900 CELLALGOSWITCH mode
access
control.
DRX
when
scheduling.
OFF, between
switch
DRX barring
Therefore, is is joint
turned
enabled; if
ACK
This
switch
the
algorithm.
sharing
disabled
1. The +interference
switch
eNodeB Number
is
cell
withon,
for This applies
optimized
decides
bandwidth
the
UTRAN. of NO
LTE LST scheduling
information.
not
on
or for
all
aperiodic
rejection both
the is and
services
the
not If
CQI thisprimary
applied
NACKs
only
closed-loop
whether
algorithm to FDD
InterFreqBlindMlbSwitc
cell.This
must be for
to can
changed
parameter initial
cells.
power
perform be1to tothe
used isits
MOD
CELLALGOSWITCH independent
parameter
with
cell
reporting
to the and
the PRACH. QCI
theis istriggered
set
secondary
of When are
transmissions
UlIicsAlgoSwitch:Indic
control
frequency-priority-
when
h:
unavailable
next Indicates the
higher for GSM the standard
in
the xPUSCH
this CQI
and
switch
BTS3900, BTS3900 CELLALGOSWITCH scheduling.
ACBAR_SWITCH_DIS
VoIP
cell.
after
the Ifthe
services,
theswitch
eight smart
TTIs itusedDRX
whenisnearto
adjustment
ates
is
based
LTE
used applied
version.
bandwidth carriers enable to
tointer-frequency per
level. UEs
share or For the NO
LTE LST ABLE,
recommended
switch
DRX is
PrachIntrfRejSwitch
NACK)/(Number
enable access
is turned
disabled.
or disable barring
thaton, Ifthe
of this
the
this
MOD the
Indicates
handover
same
disable
example, cell power center.
the the
based
the inter- switch If
amplifier. onthis
CELLALGOSWITCH is
smart
switchdisabled.
parameter
NACKs
UL IICS DRX
be
is turned
off, isfeature
aset UE off.
to If
BTS3900, BTS3900 CELLALGOSWITCH switch
used
measurements.
This
frequency
bandwidth toisfor
improves algorithm.
control
off, initial
blind
of optimized
powerThis
aIndicates
15load MHz
UlLdcSwitch:
applies
performing
ON, the
transmissions
this switch
closed-loop
whether toPUCCH UEs isinitialturned
power + that are NO
LTE LST switch
usage
balancing.
cell must is
and valid
be service only
changed
the
newly
access
on,
control
resourcesswitch
PrachIrcSwitch
Number admitted
interferencetriggers
forofLTE used
areACKs
the and
PUSCHto
option
can for be
MOD
CELLALGOSWITCH when
quality
PrbValMlbSwitch:
to 20 of UEs
BTS3900, BTS3900 CELLALGOSWITCH is theMHz.
control
support
aperiodic
of
initial
reduced
allocated
not whether
applied
FreqPriorIFHOSwitch
adopting
the
IrcSwitch CQI
transmissions)
based
based
quadrature
mobility
to to
onUEs
on the
Indicates
(2) It isreport.
implement
speed
reporting
parameter recommended
the
based load
takes switch
The control
oneffect: NO
LTE LST If
accurate
near
UL
is
phase
used
that this
peak
set theswitch
to shift detection
cell
rate.
On. keyingis
center.
If on,this the
of
MOD
CELLALGOSWITCH
in
eNodeB
CQI
user
This
switch
(QPSK) ifthis
the
related
(1) to
theuplink
adjustment
attributes
switch
enable
option
configures
istriggering
asturned of and
applies
their
abe
orcell.
is
on,
not If
disable
selected
this
dynamic
conditionsswitch
PrachIrcSwitch theif
DRX the
isload
after turned the
option
BTS3900, BTS3900 CELLALGOSWITCH calculated
resource
only
resources
modulation
balancing
bandwidth to LTE scheduling
based
are
based
of FDD
scheme aflexibly
cell onisin
cells.
on
on,
parameters
DLMAC
is
the nottheselected,
coordination,
following system
instance basedformula:
therebychecks
MRC hason is NO
LTE LST PuschRsrpHighThdSwi
allocated
case
PRB
1.4, that
3,evaluation.
5,toor to
thespeeds PUCCH.
10GSM MHz. This and
CELLALGOSWITCH for
the
been
applied
CQI congestion
mobility
increasing
tch:
When established
adjustment
Indicates
there the the in
PRACH;
cell
iseffects
whether
only = a the
for
LTE
switch
(3)
uplink
reported
200 To busy
ms. avoid
takes
of by
the hours
Consider UEs.
cell. If the
that
(2)
Number
edge ifUEs,
closed-loop
few
appear the
throughput.
atof the ACKs
different power
PUCCH for
only
interference
uplink
smart
aperiodic on
PrachIrcSwitch DRX
is LTEcongested,
CQI from
TDD
switch option cells.
is
initial
UlEnhancedSrSchSwit
control
is
time
This allocated
adjacent transmissions
points
switch for the with
or PUSCH
that less the x
load
turned
reporting
is
CQI
ch:
limits
RBs. control
selected,
Indicates off,GERAN
adjustment
This
the the
maximum
will
ismaximizes iswhether
triggered
MRC/IRC be
smart per
cells
traffic
removed
to the
performed.
DRX
by invalid is
PUCCH,
feature unbalanced.
inCQI Iflater
does
this thenot
reports
adaptation
ACK
uplink
value
the
This +
number ofre-scheduling
Number
parameter RSRP. is of applied of
PUSCHIf thisis
versions.
PUCCH
switch
apply
in
to eight to
theavailable is flexible
the In
turned
consecutive
PRACH. this
newly off, the
NACKs
performed
switch
RBs
indicates
version,
configuration is for off,
thethe only
initialclosed-
settingto
switch wheneach for
of
system
admitted
CQI
the
loop
UE. Onreporting
transmissions
power doesUEs.
Duration not
control x The
periods.
CQI check
timer for
the GL
this switchby
(specified dynamic is still the power
Indicates
controls
Indicates
eIISwitch whether
whether
whether
options toofto
to
parameter
apply 2R is selected,
MRC/IRC
enable
this eNodeB
the parameter PDCCCH
dynamic performsare
adaptation
selective
spectrum
selected, on
transmission
sharing
the ULthe in
a load-based
PUSCH. The setting
in
the
CoMPan SFN
E-UTRAN
redirection function cell.
to an cell.
isintra- If of
MrcIrcAdaptivefor2R
If
the
Forthe
enabled services in a physical whose
RAT
takes inter-frequency
effect onlysites on in
SfnPdcchDcsSwitch
GLDynSpectrumShare
QoS
site or
neighboringclassphysical identifier
cell. on
Indicates
cells
check
Switch
(QCI) established
box
is option
not whether
under1: isWhen the to
MOD a BBU in
Otherwise,
enable or Cloud the BB
disable
LBBPd
SFN
selected,
this parameter
scenarios. boards.
Algorithm GSMnot Switch
is
and set to
BTS3900, BTS3900 CELLALGOSWITCH eNodeB
adaptive does
dedicated
LTE LST
In
LTE 2Rdynamic
parameter
ROUND_DOWN:
If the
perform
cells
the
established
is selected,
spectrum (1)cell If NO
reselection
Indicates
on LBBPc
sharing
the PDCCH
number is whether priority.
boards:
enabled.uses
of required toIfIf
MOD
CELLALGOSWITCH UlJointReceptionSwitc
redirection.
this parameter Thisischeck set
BTS3900, BTS3900 CELLALGOSWITCH suppress
MrcIrcAdptSwitch
selective
Parameters
resource
h option of interference
transmission
block this groups is to
box
ON,
on
on, theis
the
IRC is dedicated
eNodeB
PRACH.
applies to
This
to the NO
LTE LST in adaptive
HighFreqShareRbNum
(RBGs)
parameter isSFN/SDMA
less not than 1,
LTE
delivers
parameter
PUSCH. TDDthe Ifcells.
takesdedicated effect
MOD
CELLALGOSWITCH scenarios.
and
the actual
selected
If thereselection and If
number the the of
BTS3900, BTS3900 CELLALGOSWITCH cell
only on
arethe
MrcIrcAdptSwitch
SfnPdcchDcsSwitch
LowFreqShareRbNum
RBs allocated eNodeB priority
isto
UlJointReceptionPhas
InterRatMlbRedirect NO
LTE LST to
uses
must
UEs a UE
turned
check atthe
be when
off,
boxthe LBBPc
set MRC
under before
current theand the
eIISwitch
check
following box option
under of
this this
MOD
CELLALGOSWITCH one
applies
SFN
GSM or toconditions
two
Algorithm
transmission
parameter and the
LTEisRX timePUSCH.
Switch
selected,
BTS3900, BTS3900 CELLALGOSWITCH parameter
are met:
antennas.
In 2R cells (1) is
Ifis selected,
The
this
established UE
parameter
dynamic
interval
the
the UL
eNodeB CoMP spectrum
(TTI); (2)
function
performs If the NO
LTE LST requests
parameter
on LBBPd
deselected,
sharing is to is set set
boards:
enabled.the up toan
MOD
CELLALGOSWITCH
number
is
a
RRC
OFF,
The
invalid.
redirection of
connection
the
setting
required
offrom
interference anIn
with
PDCCH
GSM
RBGs andis
UlCompRollbackSwitc
E-UTRAN uses LTE
greater joint
cell toisbeing than
anot
BTS3900, BTS3900 CELLALGOSWITCH the
on cause
the
transmission
dynamic
N but PRACH
MrcIrcAdaptivefor2R
Indicates less thevalue
spectrum
than in N+1 (N
h:
UTRANIndicates or whether
GERAN a NO
LTE LST mo-Signalling.
suppressed.
takes
coverage-based
Indicates
adaptive
sharing,
is greater effect thewhether
SFN/SDMA
than If
only
idle (2)
this
or whenThe
inter-
to
MOD
CELLALGOSWITCH CoMP
cell.
Indicates
MME UE
Otherwise,
instructs is
whether not thethe to
parameter
MrcIrcAdptSwitch
frequency
enable
scenarios.
GERAN
equal toorspectrum
1), isRBs
handover
disable set tothe
iscan
BTS3900, BTS3900 CELLALGOSWITCH Indicates
selected
eNodeB
prioritize
eNodeB
ON,
on.
mode. the
If If
whether
any
does
frequencies
to
this release notofto
more N
in
the in
interference
SfnUll2SelectiveRcvS
be
RBGs
enable
UL used
CoMP are
or by randomize
allocated
the
disable
and E- to NO
LTE LST perform
a
S1 multi-frequency
bearer.
PrachIrcSwitch
Indicates
MrcIrcAdptSwitch
parameter the the is(3)thereby
set The
switchoption
toIfand of
MOD algorithm
witch
UTRAN
UEs
enhanced
becomes incontrols
thecell,based
a current
MIMO.
non-CoMP whetheron TTI the
the
CELLALGOSWITCH redirection.
network.
eNodeB
of
the the
DL fails
IrcSwitch
scheduling
MrcIrcAdaptivefor2R
HANDOVERIMMEDIA This to check
obtain
BTS3900, BTS3900 CELLALGOSWITCH eCoordinator
to
and
UE. enable
increasing
TM9Switch
Indicatesthe
If this other selective
the thecheck
switch or
required
typeto box
isIf
of
box
the
are UE
parameter
policy. is
TELY(Handover
on, dedicated
FixedMeasObjIDSwitccapability.
According
MRC/IRC takes effect.
to NO
LTE LST eNodeB.
data
bandwidth
RBs
is reception
are
selected,
turned
reference on, This
allocated
and
signal
the the at(RS)
eNodeB layer-
to
LTE
h:
this
If
thethe Max
adaptationTDD
Indicates
switch
Immediately), cells.
PrachIrcSwitch
C/I is whether
turned
scheduling
applies the to
MOD
CELLALGOSWITCH parameter
2 in
accessed
detects
power an
throughput
UEs in SFN
the
toeNodeB
signal UE is
next
of
be delivered dedicated
cell.the
can TTI.
qualitiesE-
If
the
thethe
off,
option
policy,
eNodeB eNodeB
theTM9
PUSCH. of
the the UE
immediately maps
IfIrcSwitch
with does
BTS3900, BTS3900 CELLALGOSWITCH to
If
enter
and
in LTE
the
UTRAN
Setting
system TDD
this
interferencecell. mode. cells.
parameter
information If the
InterRatMlbBlindHo
each
not
parameter
good-qualityneighboring
deliver
MrcIrcAdptSwitch
determines dedicated
is channels
cleared,
whether NO
LTE LST If
to this
TM9Switch
changes
block parameter
SfnUll2SelectiveRcvS
ROUND_DOWN
type of 2 check
the(SIB2). isis
serving boxseton
to
check
frequency
cell
interference
are
and
perform box
reselection
scheduled a under
to
coverage- a and
on thisIf
priority
the
MOD
CELLALGOSWITCH to
witch
is
and
the OFF,
ensures check
deselected,
AntRsPwrSwitch
coordinatingthe
full box
utilization
the under
cells
parameter
MeasObjectID
to
PRACH
hencea UE the
MrcIrcAdaptivefor2R
based even
is is selected,
spectral
suppressed
inter-frequency based
ifcannot
the
BTS3900, BTS3900 CELLALGOSWITCH interference
the
of
the
on a
eNodeB
SFN
RBs,
accessed
of
option CoMP
eNodeB
the is butAlgorithm
UE
selected,
frequency
fails UE randomize
increases
performsin
to obtain real theis NO
LTE LST based
efficiency
off,
handover
Switch IRC
algorithm
scheduling
enter
time.
RS power TM9on the
is
applies
parameter
If handover
the when very
disabled.
times
mode.
calculated
eNodeB to high.
is
and the
This If
MOD a
theblind
measurement
maximum
The
PUSCH. UE
receivingQoS capability
and
Ifa ratio fairness from
CELLALGOSWITCH this parameter
selected,
decreases
parameter
detects
based on that the
the downlink
is the is set to
eNodeB
BTS3900, BTS3900 CELLALGOSWITCH an E-UTRAN
priorities.
information.
combining
among
MrcIrcAdptSwitch
measurement users, If(MRC).
this cell
report. to
optionisIf aIf
ECO_BASED,
selectively
data
unavailablerate.
interference
AntOutputPwr receives
IfGERANthis
infrom the
this NO
LTE LST UTRAN
is
the selected,
however,
off,
this PrachIrcSwitch
MRC
parameter or cannot
applies the be cell
eCoordinator-based
layer-2
parameter
version.
Indicates
signals
parameter
for load data
of is
whether
UEs
balancing.value setis
using into isto
set
thetothe to
MOD
CELLALGOSWITCH eNodeB
option
ensured.
PUSCH.
BASEDONSIGNALST
interference
multiple of maps
the
The
working each
IrcSwitch
Max
randomize RRUs C/I
ROUND_UP
enable
coordinating
delivered
Otherwise, a specific
inthe and
SIB2.
cell If the
BTS3900, BTS3900 CELLALGOSWITCH neighboring
parameter
scheduling
In
RENGTH(Based
2R
algorithm cells is frequency
policy
selected,
established
ismitigated
enabled. can
on
LTE LST
to improve
number
scheduling
cannot
the
eNodeB
to a AntRsPwrSwitch
be of
corresponding does the
required
policy uplink
not in If NO
interference
be
on
Signal
this used
the
parameter
coverage.
RBGs
the
using
option uplink ULis
is to
Strength),
UBBP not If
greater
and
CoMP, verify
on
the the
boards:
isthan
selected, the
set toIf
the
the
MOD
CELLALGOSWITCH perform
MeasObjectID
Indicates
PRACH
maximum the
is the blind
capacity
suppressed based
MrcIrcAdptSwitch
eNodeB
ENB_BASED,
SfnUll2SelectiveRcvS
N butRSless
Indicates
downlink.
eNodeB
the waits
power
nothe than
This longer athe
N+1 isof(N
BTS3900, BTS3900 CELLALGOSWITCH handover.
on
based
the the
scheduling
system. frequency
on the policy
The RR used
on,
moment
witch
is MRC/IRC
eNodeB-based
Indicates
greater
percentage
parameter
selects
specified check the and
how
than of
byconsists
CoMP then
box
the to
or
freeUEunder
apply of NO
LTE LST measurement
when
scheduling CA is applied,
policy
rejection
MOD
CELLALGOSWITCH
adaptation
determines
interference
the
equal
shared
the
in SFN
policy toRBs
following
ReferenceSignalPwr
UL CoMP, 0), ofapplies
Algorithm whether
randomize
increasing
RBs
onswitches:
and theofis
the toto
priorities.
which
combining
the
perform
Switch
the fairest
PUSCH.
algorithm
number can ainA
parameter be higher-
scheduling
(IRC).
coverage-
is basicis
Ifdelivered
enabled.
of
BTS3900, BTS3900 CELLALGOSWITCH N+1
PDSCH
UE becomes
parameter
Indicates RBGs
AbnUeSchSwitch: the isare
schedulinga non-
weight of
priority
scheduling
policy.
MrcIrcAdptSwitch
based
deselected,
resource frequency
When
inter-frequency
blocks or the RR isis
(RBs)is NO
LTE LST allocated
based
Indicates
CoMP
in
the SIB2. on
UE.
point-to-point to
pay-free
whetherIfUEsthis in tothe
LST mapped
differentiated
adopted,
off,
handover
eNodeB MRC
Indicates
to lower to
the
theapplies
to
receives
the a smaller
system
the local toID the
CELLALGOSWITCH current
users
disable
switch
(P2P) andisTTI.
scheduling
service, pay
turned Setting users.
off,
which ofthe is
BTS3900, BTS3900 CELLDLSCHALGO MeasObjectID.
scheduling.
capacity
PUSCH.
strongest
layer-2
of
modulation
the data
cell. is the
It If
neighboring
andusingthe
uniquely Ifcoding
this
CA the
this
The
abnormal
eNodeB
used parameter
other
in RBs
UEs.
always
enhanced to
on
If the
this YES
LTE MOD option
basic
smallest.
In
cell 4R
target
identifies
scheme is
scheduling
indicated
cells
RRU. not
Therefore, selected,
a established
(MCS) cell bywithin policy
the
index.
ROUND_UP
PDSCH
switch
selects
proportional
the eNodeB istheare
on, CoMP wastes
allocated
abnormal
fair
does (EPF) UEaa
not
MOD
CELLDLSCHALGO is
RR
on adopted,
is
received
BS.
If the
this used
LBBPc,
parameter the
only
measurement to
LBBPd,
is
few
to
UEs payRBs,
are
in ULneighboring
Indicates
scheduling.
map
eNodeB
users.
CoMP, but
not
whether The When
andvalue toset
the
BTS3900, BTS3900 CELLDLSCHALGO verify
or
reports.
to UBBP
decreases
sufficient
scheduled.
UE will the Ifcalculates
never upper
boards:
this
scheduling
capacityIf this
become Ifisthe
bound
NO
perform
of this downlink
parameter rank
LTE LST frequencies
proportional
of the and
parameter scheduling
MrcIrcAdptSwitch
SINGLEUSER_STRAT
times
available,
switch
a non-CoMP isto fair
increases
the
iscalculating
off, set
abnormal
UE. tois
(PF) is
This
MOD
CELLDLSCHALGO optimization.
used
scheduling
fairness in
MeasObjectIDs in If
priority
the this
based
system. the
of
on,
BASEDONFREQPRIO
EGY,
UEs MRC/IRC
downlink
percentage
Indicates
switch are the policy
data
scheduled.
applies the ofset rate.
RBs
method
only is to
BTS3900, BTS3900 CELLDLSCHALGO parameter
priority
on
each
In the
terms of
frequency
component a is UE to
during
adaptation
RITY(Based
applied
When
occupied
for
cells
OFF, measuring
scheduling this toofeNodeB
established
the by the
applies
and
ontheontoan
aparameter
single
pay-free uses is NO
LTE LST measurement
carrier
scheduling
the
Frequency
PUSCH.
RRC_CONNECTED (CC) for
effect,
Priority),
If a CA the
MOD set
users
Doppler
LBBPc.
the to ADAPTIVE:
and
rank received
therefore that
frequency
determines (1)
from
CELLDLSCHALGO priorities.
UE
PF using
scheduling
MrcIrcAdptSwitch
the
UE eNodeB
whose the total
waits
capability policy adata
is is
is
BTS3900, BTS3900 CELLDLSCHALGO If
a
thethe
occupied
offset
UE amountnumber
that
to by
schedule is ofpay of
applied users
physical the to
rates
between
off,
moment
limitedMRC
required
will reach
frequency on both
the
and
(Maximumapplies
RBGs
theselective CCs
previous
then to
is less
preset of the NO
LTE LST UE.
resources
this
two If the
CA
policies. UE. baseband
to Inbethe thisin to
MOD PUSCH.
determines
number
than
values.
scheduling 1, the oftoDL-SCH
Changes whether
actual
on
CELLDLSCHALGO processing
allocated
way, CAof unit
the UEnon-
BTS3900, BTS3900 CELLDLSCHALGO Therefore,
perform
transport
number
this parameter
secondary aUEs PF
coverage-
block
RBs
component and
can
bits
are
affect be
determines
that
CA
used requests
UEs can
tointer-frequency
verify thatbe the
the theP2P NO
LTE LST based
received
allocated
the
carrierpercentage(SCC) within
to UEs in a
of TTI
at RBs
carrier the
received
service.
allocated
capacity, Therank
similar
coverage, P2P is
MOD
CELLDLSCHALGO handover
of the
current
for pay-free
aggregation UE TTI; to users
is a
less
(2)
(CA). cell
If than
theand
If
unsuitable
service
number priority
of forofUE has a
BTS3900, BTS3900 CELLDLSCHALGO and
whose
the
number
that
this fairness
maximum
for
parameter
scheduling,
positive of RBs.
frequency
pay required
correlation users.
the TBSthe
is Ifset the
has with to
CA
system.differentiated NO
LTE LST a
therelatively
RBGs total
Modifying
FROMSCC,
eNodeB
with the is Thenumber
greater
the
schedules
value
low EPF
the priority.
value
of of
than
this of
the
MOD
CELLDLSCHALGO scheduling
PRBs).
N but less The policy
than policy N+1 isan
is
this
Doppler
UE parameter
based
parameter.
adopted,
supports
frequency
the on This rank
eNodeB
for
features 1.(N If
BTS3900, BTS3900 CELLDLSCHALGO applied
is greater
active
offset cell
on to a
than
the will UESCC or
lead with istoato
this parameter
parameter
calculates
such as user is
the valid is
PF
QoS, set only NO
LTE LST single
equal
the re-setup
measured. service
to 1), IfRBs
of
this when
the of cell.
MOD ON,
when
scheduling
system the the eNodeB
service
capacity, priority and of
CELLDLSCHALGO the
N+1 following
parameter RBGs isare set to
BTS3900, BTS3900 CELLDLSCHALGO optimizes
differentiation
each
channel CC fortheareceived
frequency function
CA UE
conditions
allocated
FROMPCC,
rank
is and
enabled. to are
schedules UEs
the met in the NO
LTE LST using
selection.
within
current the
a data
The
measurement
TTI. Compared rate
basic
MOD Doppler
the UE frequency
based on the
CELLDLSCHALGO only
scheduling
period:
with onon
setting the
(1) primary
policy
thisthis is
BTS3900, BTS3900 CELLDLSCHALGO offset
optimized therank. primary If the
component
mainly
parameter
component used is carrier
for
set to
tocarrier the NO
LTE LST baseband
(PCC)
performance or processing
secondary test
SINGLEUSER_STRAT
ROUND_UP,
(PCC)
unit is measured
determines setting
thatno
CELLDLSCHALGO component
purpose. During carrier
EGY;
this
matter
the (2)
parameter
received whetherthe service
rank totheis is
(SCC)
common
the
SCC only
ADAPTIVE isof thisdoes
operation,
service
configured CAtoUE. not be the
with
unsuitable
In
EPF this way,
scheduling for CA UE UEs
policy
scheduled
waste
an uplink
scheduling, RBs inwhen
carrier, the the cell;
the
and
can
is
(3)
number
then theachieve
recommended.
theproportion
of betterof
required
Doppler
eNodeB
performance does thannot non-
the
RBGs transmission
frequency
optimize is lessthe offset than
received time
is 1.
CA
For
appliedUEs.
intervals
services (TTIs) whose in
rank andtoschedules frequency
Indicates
detection the when traffic
volume threshold
reporting rank 1. In ofthis a
bearer above
case, the UE performs which
the bearer is
single-codeword
Indicates whether
determined as a the
scheduling.
TDD special If the
bearer
Indicates with the large
DETECTRANK2ADJS
subframes
packets in the arethreshold used
PDCCH
MOD for
WITCH
for the
downlinknumber
check boxof is
BTS3900, BTS3900 CELLDLSCHALGO and
selected,PDSCH
synchronized the resource
UEUEs in a
scheduling.
allocation optimization NO
LTE LST cell
performsabove
If the parameter which
rank 2 the
is set
MOD
CELLDLSCHALGO mechanism
PDCCH
detection andwhen when
PDSCH
to SCH,
traffic
Indicates is TDD
heavy.
the special
threshold
If
BTS3900, BTS3900 CELLDLSCHALGO resource
reporting
subframes allocation
rankare 1.used Ifthisthe NO
LTE LST parameter
of the
optimization number
DETECTRANK1ADJS is set of to 0,
MOD for
none downlink
Indicates
synchronizedof thethe threshold
bearers
CELLDLSCHALGO mechanism
WITCH
scheduling. check is box isis
UEs for
BTS3900, BTS3900 CELLDLSCHALGO of the
determined
triggering PRB usage
inter-RAT
as for
activated
cleared,
If the parameterin large
the UEadoes is set NO
LTE LST triggering
bearer
load
Indicates
traffic sharing.
with
volume inter-
theranklarge Inter-
modulus
MOD notNSCH,
to perform TDD 1
special
CELLDLSCHALGO frequency
packets.
RAT
for load
calculating
scenarios. If load
sharing
this
Ifare this the is
BTS3900, BTS3900 CELLDLSCHALGO detection
subframes when not
balancing.
parameter
triggered ofwhen If the
is set
LTE LST
position
parameter
reporting
used for rankRBs
is
downlink set 2.the
toto
Inbe
to a
athis NO
MlbTriggerMode
value
PRB
scheduled
value usage
ranging
ranging in of from
the
eNodeB-
from cell
1
0 to
to
MOD
CELLDLSCHALGO case,
Indicates
scheduling. the UE
the performs
threshold
parameter
1000000
is greater
based
10000 is
(indicating
than
interference
(indicating set or to a a
BTS3900, BTS3900 CELLDLSCHALGO dual-codeword
of consecutive
Indicates the threshold
PRB_ONLY(PrbMode)
threshold
equal to the from
LTE LST
randomization.
threshold
scheduling.
discontinuous
of the PRB from Ifsum
usage the1
0Thisbit
of the
UE for
toto NO
or
1,000,000
InterRatMlbThd
parameter
10,000 UEs), bits),
is added the and
a to
MOD
CELLDLSCHALGO DETECTRANK1ADJS
transmissions
triggering inter-RAT (DTXs)
PRB_OR_UE_NUMBE
bearer
LoadOffset
support
mechanism whose parameter
interference
is traffic to
BTS3900, BTS3900 CELLDLSCHALGO WITCH
in
loadthe check
downlink
sharing. boxabove
Inter- is
R(PrbOrUeNumMode),
be
values scheduled
randomization
activated and when the is number
and is NO
LTE LST selected,
which
RAT loadthe the eNodeB
sharing UEtheis
MOD inter-frequency
greater
of synchronized
dedicated
Indicates
number than
of to or
the LTE
code load
equal
UEs TDD rate in
CELLDLSCHALGO performs
stops
triggered rank
scheduling
if the 1number the
BTS3900, BTS3900 CELLDLSCHALGO balancing
to
the this
cells.
for cell
Random
synchronized parameter
is is
greater triggered
Access
UEs value
than
in
detection
abnormal
of synchronized when
UE. The UEs
LTE LST when
is
or
Response
the cell the
determined
equal isto number
theas
messages
greater sum ofofin
athan NO
reporting
parameter
the cell is rankvalue
greater 2. range
than
CELLDLSCHALGO synchronized
bearer
the
Indicates
and
or paging
equal with the large UEs ID
local
messages. in
is
or
the from
equal
cell 6isto
to
to this
120.
the
greater sum than of
BTS3900, BTS3900 LST CELLMLB packets.
InterRatMlbUeNumThd
of the
Indicates
parameter cell. the It
value.uniquely
threshold
the
or
and equal to the sum ofa YES
LTE MOD CELLMLB identifies
of the number a cellofwithin
InterRatMlbUeNumThd
Indicates
the
BS. the
MlbMinUeNumThd
InterRatMlbUeNumOff
synchronized mobility
UEs for
BTS3900, BTS3900 MOD CELLMLB Indicates
and
load
and balancing the target (MLB)
set parameter
triggering inter- values. NO
LTE LST CELLMLB frequency
InterRatMlbUeNumOff
triggering
MlbMinUeNumOffset selection
mode. The
Inter-RAT
frequency load sharing
policy
set applied
parameter
parameter for
values inter-
stops
balancing. if thevalue values
number
When and
the of
BTS3900, BTS3900 MOD CELLMLB frequency
and the PRB
PRB_ONLY(PrbMode)
the PRB load
usage usage of the of
synchronized
MlbTriggerMode
Indicates the UEs in NO
LTE LST CELLMLB balancing
the cell
indicates
cell is is
greater andthreshold
greater
that inter-
MLB
than thancan
or
the cell
parameter
of the is
minimum less
is set to than the
RAT
or
be
equalequalload
triggered
to thetosharing
the by the
sum of the
InterRatMlbUeNumThd
UE_NUMBER_ONLY(
number of
BTS3900, BTS3900 MOD CELLMLB when candidate
InterRatMlbThd
PRB usage.
InterFreqMlbThd The cells
andand
parameter
UeNumMode)
synchronized value or
UEs for or the NO
LTE LST CELLMLB work
LoadOffset
parameter
LoadOffset
Indicates at different
the parameter
value
parameter
MLB
PRB usage
PRB_OR_UE_NUMBE
triggering inter- of the cell
frequencies.
values.
UE_NUMBER_ONLY(
values.
mode Inter-RAT
Load Ifbalancing
thisload
BTS3900, BTS3900 MOD CELLMLB is lessfor than
R(PrbOrUeNumMode),
frequency downlink
loadthe
parameter
sharing
UeNumMode)
stops
data whenstops
transfer. is thesetif load
If to
the
PRB
this NO
LTE LST CELLMLB InterRatMlbThd
inter-frequency
balancing. When the
FAIRSTRATEGY(Fair
number
indicates
usage
parameter of
of thethatis MLB
cell
set or
to can
the
Indicates
balancing
MlbTriggerMode the
isvalue. inter-
triggered The
Strategy),
synchronized
be
number triggered
UeNumBased, of an by E-
UEs the
the in
BTS3900, BTS3900 MOD CELLMLB actual
frequency
if the
parameter threshold
number load
is set of of
to the the
UTRAN
the
number cell isof
synchronized frequency
less
UEs. than
UEs The NO
LTE LST CELLMLB downlink
number
balancing
synchronized
Indicates
PRB_ONLY(PrbMode)
among
ofdata
all mode
the UEs
offset
neighboring forfalls
transfer inof
InterRatMlbUeNumThd
parameter
below
MLB
synchronized
UEs in
cell the
algorithm
idle
is value
value
mode.
greater UEsis ofthan the
If
the
or
E-UTRAN minimum number
frequencies
BTS3900, BTS3900 MOD CELLMLB parameter
PRB_OR_UE_NUMBE
InterFreqMlbThd
enabled.
equals
the
or equal the
Proportion If value
this
percentage
towhether
the check
sum or the
of
of synchronized
Indicates
PRB_OR_UE_NUMBE
of candidate cells UEs the
is NO
LTE LST CELLMLB PRB
parameter
value
box
the usage
R(PrbOrUeNumMode)
multiplied
under or
is
this of the
set the to
by cell
value
for triggering
inter-RAT
R(PrbOrUeNumMode),
randomly load
selected inter-
is
of less
the than
indicates
NON_TRIGGERED,
1000.For
parameter
InterFreqMlbUeNumTh
frequency thatisthe
example,
load MLB as
selected, can
balancing
load
the balancing
target
InterRatMlbThd to UTRAN
frequency is is
in
BTS3900, BTS3900 MOD CELLMLB be
the
d and triggered
MlbMinUeNumThd
downlink
parameter
eNodeB
balancing. value
Ifthe by
data
transfers
the either
1 UEs
performed
triggered
inter-frequency if only on
PRB
load NO
LTE LST CELLMLB parameter
the PRBMLB
parameter,
transfer
indicates
normally usage
thatvalue. or UEs
algorithm
the the
MlbUeNumOffset
MlbTriggerMode
in hotspots.
usage
balancing,
number ofofreleased
the and
UEs.
This
cell allis
respectively.
is disabled.
threshold
to frequencies
parameter forvalues.
is the
set based
dedicated to
BTS3900, BTS3900 MOD CELLMLB greater
inter-RAT than or
neighboring equal
This
number
on theparameter
Inter-frequency
PRB_ONLY(PrbMode)
LTE
Indicates
to the ofthe
preset
TDD
sum of cells. is
load NO
LTE LST CELLMLB frequencies
dedicated to of LTE TDD
synchronized
proportions
balancing
or
frequency
InterFreqMlbThd stopsfor
selection UEs ifand is
the
candidate
cells. cells are
BTS3900, BTS3900 MOD CELLMLB 10 (1000
neighboring
number
PRB_OR_UE_NUMBE
policy
LoadOffset of
foras x 1%),
inter- parameter
selected
Indicates the the target
strategy NO
LTE LST CELLMLB parameter
frequencies
synchronized
R(PrbOrUeNumMode),
frequency
values andidle value
of
the the
UEs
MLB. 2 inIf
number
frequencies
for selecting inUEs inter- inso
indicates
serving
the cell is threshold
frequency
less than 20,
inter-frequency
this
of parameter
synchronized
RAT load sharing.
inter-RAT load isload
UEsset
sharing Ifthe to
in
BTS3900, BTS3900 MOD CELLMLB and
that parameter
load
InterFreqMlbUeNumTh
balancing
LOADINFOFREQ,
the cell
Indicates is balancing
is
greater
the value
triggered
PRB than for
load
this parameter
triggered bymode the isPRB set to NO
LTE LST CELLMLB 10
UEs
d
when indicates
inthe
parameter
frequencies
or equal
calculation idle
to number
the threshold
value.
capable
method sum is
ofofof
PRIORITYBASED(Prio
usage. If this
100.
achieved.
obtaining
the
when Note
synchronized
MlbMinUeNumThd
the that
This
load
Mobility if
UEs the in
Load
rityBased),
parameter isthe set to
BTS3900, BTS3900 MOD CELLMLB parameter
the
and cell
information
Balancing is value
is
greater
can
Trigger valid beisthan100
only
frequency
PRBRATIOHIGHMOD with the NO
LTE LST CELLMLB or
when
or
used 99,
equal asthe
the
MlbMinUeNumOffset
Mode to
the
parameterthreshold
Proportion
thetarget sum is set for
of
highest
E, the priority among
eNodeB
the
check
the numberbox
MlbMinUeNumThd
frequencies
parameter
to is of selected.
forwhose
values. inter-
BTS3900, BTS3900 MOD CELLMLB all PRB_ONLY
intra-RAT
transfers UEs or
synchronized
and
frequency
Load balancing
PRB_OR_UE_NUMBE MLB UEs in
stops is 1
idle NO
LTE LST CELLMLB neighboring
PRB usage is greater
or
when 2, respectively.
MlbMinUeNumOffset
mode. Ifparameter
the this
PRB
R. The
frequencies
than the andusage the
BTS3900, BTS3900 MOD CELLMLB parameter
of the PRB_USAGE
value
frequency cell or
MlbUeSelectPrbThd values
is the
with setthe toand
the
ALLFREQ,
number PRB
indicates
highest priority ofusage
that all the of
among the
PRB NO
LTE LST CELLMLB parameter value but
cell is
frequencies
synchronized
load greater can
than the half offalls
is
all inter-RAT
less calculated than
UEs be or
BTS3900, BTS3900 MOD CELLMLB equal
used
below
based
frequencies to
asthe
the LoadDiffThdon the value
the sum
target
are PRB of the the
InterFreqMlbThd
frequencies
InterFreqMlbThd for inter- and NO
LTE LST CELLMLB usage
selected
parameter in astraffic target
value. If this
LoadOffset
frequency
parameterThe
channels.
frequencies
parameter MLB parameter
orseparately
is the to
set in idle
value
values.
mode,
of the
parameter including
when inter-frequency
PRBRATIOLOWMOD value inter-
frequency
MlbMinUeNumThd
PRB_VALUATION_WI
load
E, thebalancing
eNodeB EARFCNs and
carrying
transfersor
parameter,
TH_CTRL
inter-RAT notwhose
indicates
load
UEs carrying
sharing
information.
respectively.
that
are the
PRBtriggered
usage PRBisload lessis
calculated
separately
than or equal based
or both to the on
the PRB evaluation
operator-level
InterRatMlbUeSelPrbT inter- in
adjustment on the
and
switch
number downlink
for ofdynamic
orthogonal
scheduling
adjustment
Indicates the
frequency and
ofthreshold
division the
controlling
number
of isolation for
multiplexing of information
OFDM (OFDM)deciding
is transmitted.
symbols
whether
symbols occupied
to
occupiedenable If the by
by
PDCCH
the
PDCCH PDCCH Symbol
selective
the physical downlink is turned
Number
off, this channel
transmission
control Adjust
parameter in Switch
LST Indicates
parameter
indicates
adaptive SFN/SDMA
(PDCCH). the Local
Ifis this
set
number to ID
BTS3900, BTS3900 CELLPDCCHALGO OFF,
of the
OFDM cell.
this
scenarios. For
parameter It
parameter
symbols
is setuniquely
antoUE, that YES
LTE MOD identifies
indicates
are always
if the ratio
OFF, the numbera
the cell number
occupied
between withinofthea
MOD
CELLPDCCHALGO BS.
of
by OFDM symbols
BTS3900, BTS3900 CELLPDCCHALGO OFDM symbols the
RSRP the PDCCH.
of strong If
occupied
switch
signals
occupied isand by
turned
bythat the
the on
of and NO
LTE LST Indicates
PDCCH
the bandwidth the
where adaptive
isthe 1.4
MOD Indicates
weak signals
PDCCH is the fixed switch
from and
CELLPDCCHALGO strategy
downlink
MHz or 3 of the
subframe
MHz, PDCCH
the
BTS3900, BTS3900 CELLPDCCHALGO used
multiple
cannot tobe enable
RRUs dynamically oran
in
aggregation
indicating
PDCCH
disable
SFN cellclosed-loop isIfthe
occupies level.
equal uplink to4Theor
or NO
LTE LST adjusted. this
STRATEGYBASEDON
and
3 OFDM downlink
adjustment
greater thansymbols,to the the value in
MOD
CELLPDCCHALGO parameter
COVERAGE is set
check to
BTS3900, BTS3900 CELLPDCCHALGO scheduling
this
PDCCH
of
ON, scenario,
this the parameter,
number and
aggregation thisofthe
box is
controlling
parameter
level.
powerIfof selected
thisweak information
cannot
switch for be
signals this
is NO
LTE LST OFDM
parameter symbols by default.
MOD
CELLPDCCHALGO is transmitted.
manually
turned on,by set..
is not transmitted.This
occupied PDCCH the For
If the
BTS3900, BTS3900 CELLPDCCHALGO In this case,
downlink
switch
aggregation
parameter subframes
is isturned takes a
level higher
on isand
effect
PDCCH
aggregation dynamically
level isthe NO
LTE LST indicating
the
only bandwidth
adjusted
adjusted for LTE both
based
based TDD uplink
is on 5
oncells. the
MOD
CELLPDCCHALGO applied,
and
MHz,
block downlink
10
error and
MHz, therefore
rate15 (BLER)
required
the cell number
that the Ifcontrol of
BTS3900, BTS3900 CELLPDCCHALGO scheduling
MHz,
of the
PDCCH
Indicates or
PDCCH.20
control
the and
MHz,number the
this
channel serves has NO
LTE LST controlling
eNodeB
switch
channel
of adjusts
isthat
RBscoverage. turnedinformation,
elements are off, the
MOD
CELLPDCCHALGO better
if the PDCCH
number
PDCCH of OFDM
aggregation Symbol
BTS3900, BTS3900 CELLPDCCHALGO (CCEs).
interfered
However, If bythis
the GERAN
number
Number
symbols
level
parameter
at each is notAdjust
in
endisof the
adjusted
set Switch
range
the to LTE NO
LTE LST of
of scheduling
parameter
1,
based 2, onand the is 3 UEs
set
when
BLER to of
LST
CELLPDCCHALGO ECFIADAPTIONON,
DL frequency
Indicates
carried by thethe band.
local
control If
ON,
this
the
the the
parameter
PDCCH.
number
numbers number of of is
OFDM of
such set to
BTS3900, BTS3900 GERANINTERFCFG identity
channel
OFDM of the
decreases. cell. It If
LTE MOD
the
symbols
RBs
uniquely
the aresymbols
default occupied
differentvalue 1,
identifies atby or
a 3
YES
MOD occupied
in
the
boththe
PDCCH range
ends,an by the the
of 2
iseNodeB. and
larger
GERANINTERFCFG cell
when within
STRATEGYBASEDON
PDCCH this isparameter
asadjusted
follows:
BTS3900, BTS3900 GERANINTERFCFG dynamically
number
CAPACITY is usedcheck asbox theis
On
set
based the
to 2 bandwidth
or 3. of 5 NO
LTE LST value
is ofonthis
selected, the a cell
lower
LST
GERANINTERFCFG MHz,
Indicates
downlink
parameter. the PDCCH
the local ID
throughput,
BTS3900, BTS3900 CELLCHPWRCFG aggregation
occupies
ofthis
the cell. 2 Itorlevel 3 OFDM
uniquely is
and
If
applied,the adjustment
parameter
and the is set YES
LTE MOD symbols.
identifies
performance
to 3, three (In
athe cell
RBs this
is case,
within
the
are a
Indicates
control
the channel
configuration offset of of
carries
MOD
CELLCHPWRCFG BS.
best among
interfered by the
GERAN three
the
more
this PCFICH
scheduling
parameter transmit
is UEs.
BTS3900, BTS3900 CELLCHPWRCFG methods.
at each end of to the LTE
power
This
invalid.) relative
parameterOn the isthe NO
LTE LST Indicates
DL frequency the offset
band of
MOD reference
dedicated
bandwidth signal
toof LTE 10six TDD
MHz,
CELLCHPWRCFG the
and PBCH
altogether transmit RBs
BTS3900, BTS3900 CELLCHPWRCFG power.
cells.
15
LTE LST areMHz,
Indicates
power or
relative
interfered. the 20offsetMHz,
to theof NO
the
the PDCCH
reference signal for
transmit occupies
power
MOD
CELLCHPWRCFG 1, 2,cellor 3 OFDM
the
power.
BTS3900, BTS3900 CELLCHPWRCFG symbols
Indicates when
the offset this of
synchronization NO
LTE LST parameter
the
MOD signals relative totothe
transmit is power
set for
1,
CELLCHPWRCFG and the PDCCH
broadcast information
BTS3900, BTS3900 CELLCHPWRCFG reference signal
Indicates
occupies
on the PDSCH
power. 2the oroffset
3 OFDM of NO
LTE LST the transmit power for
MOD symbols
channel relative
when this
to the
CELLCHPWRCFG the pagingthe information
BTS3900, BTS3900 CELLCHPWRCFG parameter
reference
Indicates signal
is set
offset to 2of
on
or 3.the
power.
the This
transmitPDSCH parameter
power foris NO
LTE LST
MOD channel
dedicated
the random relative
toaccessLTEtoTDD the
CELLCHPWRCFG
BTS3900, BTS3900 CELLCHPWRCFG reference
cells.
responses signal
on the
power. NO
LTE LST PDSCH channel
CELLCHPWRCFG Indicates
relative tothe thelocal ID
BTS3900, BTS3900 LST PDSCHCFG Indicates
of the cell.the
reference cell
It uniquely
signal
reference signal powera YES
LTE MOD PDSCHCFG identifies
power. athe
Indicates cell within
scaling
of
BS. each physical
factor index of the
BTS3900, BTS3900 MOD PDSCHCFG antenna.
Energy Per However,Resource the
NO
LTE LST PDSCHCFG cell reference
Element (EPRE) signal on
power
the PDSCH. delivered This in
BTS3900, BTS3900 MOD PDSCHCFG Indicates
SIB2 is that theof stepeach by
scaling
which thefactor TX is
power for NO
LTE LST PDSCHCFG logical antenna.
determined
Indicatesaccess
random thebycell the
BTS3900, BTS3900 MOD PDSCHCFG value
reference
preambles of this isparameter
signal increasedpower
and the antenna NO
LTE LST PDSCHCFG headroom
each time after of each a port.
For details,
Indicates
physical
RACH thesee
antenna.
access local 3GPP
failure. ID
DSP RACHCFG TS 36.213.
BTS3900, BTS3900 of the cell.
If multiple attempts to It uniquely
LST RACHCFG YES
LTE identifies
access the a cell PRACH within a
MOD RACHCFG
BS.
fail, the UE increases
BTS3900, BTS3900 MOD RACHCFG
the TX power for NO
LTE LST RACHCFG
random access
preambles by a step
specified by this
parameter each time
after an access failure
to ensure successful
access.
Indicates the target UE
transmit power for the
PRACH expected by
the eNodeB when
Indicates
PRACH preamble the threshold
BTS3900, BTS3900 MOD RACHCFG for determining
format 0 is applied the on
size of Msg3 when a NO
LTE LST RACHCFG condition that
UE selects
requirements for a preamble
BTS3900, BTS3900 MOD RACHCFG from
preamblerandom access
detection NO
LTE LST RACHCFG preamble
performance
Indicates group
the are Amet.
allocation
offset to
during
For starting
mode
the a sounding
details,
of random see 3GPP
position of
BTS3900, BTS3900 MOD RACHCFG access
TS 36.321.
reference procedure.
signal (SRS)
each PRACH in the NO
LTE LST RACHCFG For details,
Indicates
resources. the see
This period3GPP
frequency
Indicates
Indicates domain
the
whether PRACH of
to
TS
that
the 36.321.
a
parameter
FDD UE
configuration waits
cell.must indexfor
be set
of
BTS3900, BTS3900 MOD RACHCFG configure
message the
4 PRACH
(Msg4)
when
the the SrsCfgInd
cell. If cells are of NO
LTE LST RACHCFG configuration
during a random index
parameter
established
the cell.(RA) ison setanto
BTS3900, BTS3900 MOD RACHCFG access
BOOLEAN_TRUE.
LBBPc in a 4T4R If
procedure.
this parameter
Indicates the This istimer
maximum set to NO
LTE LST RACHCFG scenario, the PRACH
starts
number when
DEFAULTMODE, of
configuration indexes a
preamble UE SRS
BTS3900, BTS3900 MOD RACHCFG initially
resource
transmission sendsallocation
of different cells must or
times. is
resends
activated message
by default 3 NO
LTE LST RACHCFG For details
be separated in the about this
(Msg3).
after a cell
parameter,
time domain. If the issee UE 3GPP
BTS3900, BTS3900 MOD RACHCFG receives
established,
TS 36.321. and Msg4 orSRS the
Indicates the NO
LTE LST RACHCFG NACK to Msg3
resources aremaximum before
Indicates
number
the timerofexpires,
allocated the
toHARQUEsPHICH the
that
BTS3900, BTS3900 MOD RACHCFG duration
retransmissions
timer stops.
access type. If this
If the
the network. ofUE the If
parameter is set to NO
LTE LST RACHCFG message
does not 3.
receive
this parameter is set to For details
either
NORMAL,
about
message thisuntil
ADAPTIVEMODE, the the
parameter,number
BTS3900, BTS3900 MOD SRSCFG of
see OFDM
3GPP
timer resource symbols
TS
expires, the RA 36.321.
SRS NO
LTE LST SRSCFG occupied
fails, and by
the the
UE
allocation
Indicates can
the be must
local ID
PDCCH
reinitiate
adaptively is
an RA
activated or
BTS3900, BTS3900 LST PHICHCFG of the cell.
automatically It uniquely
adjusted.
procedure.
Indicates
deactivated a For details
coefficient
based on YES
LTE MOD PHICHCFG identifies
If this a cell within is seta
about
that
cell
BS. isparameter
load.this
used parameter,
After to this
to EXTENDED,
see 3GPPthe
calculate
parameter TSset
is the
36.321.
to
BTS3900, BTS3900 MOD PHICHCFG
number
Indicates
resources
ADAPTIVEMODE, ofthe OFDM
used interval
by the NO
LTE LST PHICHCFG
symbols
between
PHICH
parameters foroccupied
cyclic
the cell. shifts byIt
BTS3900, BTS3900 MOD PHICHCFG the
used PDCCH
for
corresponds
SrsAlgoSwitch, the is fixed.
PUCCH.
to the Ng
Specifically,
The intervalinbetween this NO
LTE LST PHICHCFG parameter
SrsSubframeCfg, the
number
cyclic
Indicates
protocol. is
shifts
SrsPeriodAdaptive, fixed
used
the local tofor 3IDor
BTS3900, BTS3900 LST PCCHCFG 4
the
of
Forfor
the 1.4
PUCCH
and detailscell. MHz on the and
It
UserSrsPeriodCfg can cells
uniquely be
3 for
acquired cells with
based other
onThe thea YES
LTE MOD PCCHCFG identifies
usage
do not of
Indicates take a
the
the cellNg
effect. within
maximum
bandwidths.
average
BS.
parameter,
parameter
number delay
of UEs For
see that
value the
spread
3GPP
BTS3900, BTS3900 MOD PCCHCFG mapping
in the between the
TS
can becell,
36.211.
ADAPTIVEMODE includedwhereinthe is
a NO
LTE LST PCCHCFG type
average and
recommended the
delay duration,
spread
in
paging
Indicates message
the local on ID
DSP PUCCHCFG see
is 3GPP
acquired
scenarios TS
based 36.211. on
BTS3900, BTS3900 each
of
the the cell.where
paging
networking
occasion.
It uniquely there
LST PUCCHCFG is a large anumber of a YES
LTE identifies
environment. cellThe within
MOD PUCCHCFG UEs in the cell and the
BS.
Indicates
parameter thevalue number
BTS3900, BTS3900 MOD PUCCHCFG traffic volume is large.
of resource indexes is
DS1_DELTA_SHIFT NO
LTE LST PUCCHCFG allocated to SRI
not supported byand the
semi-persistent
Indicates
LBBPc. If the a cell mobileACK
is at
BTS3900, BTS3900 MOD PUCCHCFG
the RRC
country
established layer
codeonofan forthe the NO
LTE LST PUCCHCFG
FDD
external
LBBPc
Indicatescell. If this
cell.
but the thisnumber
ADD Indicates
Indicates
parameter the
theis eNodeB
mobile
BTS3900, BTS3900 MOD PUCCHCFG
EUTRANEXTERNALC
A
of PLMN
parameter
RBs allocatedID isisset
set to
to 0,
to the
identity
network
UEs may
comprised of
DS1_DELTA_SHIFT,codethe
fail
of to
anexternal
of the
access
MCC NO
LTE LST PUCCHCFG
ELLPLMN CQI
E-UTRANat the RRC layer
ADD
LST
external
the
and
theFDD
of cell.
an MNC.
value cell.ofcell.
cell. thisIt
BTS3900, BTS3900 uniquely
A PLMN
Indicates
The identifies
ID
MCC consists
parameter theis cell an
is of
EUTRANEXTERNALC
EUTRANEXTERNALC eNodeB within a MCC YES
LTE comprised
identity
three of
digits.
automatically of an
the external
changed
ELLPLMN
ELLPLMN PLMN. The 28-bit
ADD
LST
and
E-UTRAN
The an
MNC MNC.
to DS2_DELTA_SHIFT cell.
consists It E- of
RMV UTRAN cell identity
BTS3900, BTS3900 EUTRANEXTERNALC
EUTRANEXTERNALC
The
when MCC
uniquely
two to three
this digits. aofis
consists
identifies
parameter YES
LTE EUTRANEXTERNALC comprised
three
cell digits.
within ofFor
an the
eNodeB. cell
ELLPLMN
ELLPLMN For
takes example,
effect. if the
ELLPLMN
ADD identity
The MNC
28-bit and the
consists
E-UTRAN of
LST
RMV MCC
details, is see
123 3GPP and the TS
BTS3900, BTS3900 EUTRANEXTERNALC eNodeB
two
cell
MNC to
identity
36.211. is identity
three
45, digits.
is
then the
EUTRANEXTERNALC
EUTRANEXTERNALC YES
LTE ELLPLMN (represented
For example,
comprised
PLMN ID isof12345. by
if the
the the
cell
ELLPLMN
ELLPLMN
LST most significant
MCC is (represented
identity 123 and the 20
BTS3900, BTS3900 RMV
EUTRANEXTERNALC bits).
by theThe
MNC 45,cell
isleast then global
significantthe YES
LTE EUTRANEXTERNALC
ELLPLMN identity
PLMNbits)
eight ID(CGI)isand ofthe
12345. an E-
ELLPLMN
RMV UTRAN
eNodeB cell identity.is The
EUTRANEXTERNALC comprised
cell global identity of the E-
ELLPLMN UTRAN cell
(CGI) of an E-UTRAN identity
and
cell isthe PLMN ID.ofFor
comprised the
details, seecell
E-UTRAN 3GPP identity TS
36.413.
and the PLMN ID. For
Indicates the mobile
country code of the
external E-UTRAN cell
Indicates
that is shared the mobileamong
ADD network code of the
multiple operators.
EUTRANEXTERNALC external
A PLMN E-UTRAN ID is cell
ELLPLMN that is shared among
ADD comprised of an MCC
LST multiple operators.
BTS3900, BTS3900 EUTRANEXTERNALC and an MNC.
EUTRANEXTERNALC A YES
LTE ELLPLMN The MCCIDconsists
PLMN is of
ELLPLMN comprised
ADD
LST three digits. an MCCof
BTS3900, BTS3900 RMV and
GERANEXTERNALCE
EUTRANEXTERNALC The an MNC MNC. consists of YES
LTE EUTRANEXTERNALC The MCC consists of of
LLPLMN
ELLPLMN two to
Indicates threethe digits.
identity
ELLPLMN
ADD three digits. GERAN
LST
RMV For
the example,
external
Indicates the mobile if the
BTS3900, BTS3900 GERANEXTERNALCE The
MCCMNC consists theof
GERANEXTERNALCE
EUTRANEXTERNALC cell.
country Itisuniquely
123
codeand of the YES
LTE LLPLMN two to
MNC is 45, three digits.
then the
LLPLMN
ELLPLMN identifies
external a GERAN
cell.
ADD
LST
RMV For
PLMN example,
Indicates
cell IDID
within isa is
the if theof
LAC
12345.
mobile
PLMN.
BTS3900, BTS3900 A PLMN
GERANEXTERNALCE
GERANEXTERNALCE
GERANEXTERNALCE MCC
the
network is 123
externalcode and
GERAN the
of the YES
LTE comprised of an MCC
LLPLMN
LLPLMN
LLPLMN MNC
Indicates
cell.
external is 45,the
cell. then
mobile the
ADD and an MNC.
LST
RMV PLMN
country
A PLMN IDcode
isconsists
ID 12345.
is of theof
BTS3900, BTS3900 GERANEXTERNALCE The MCC
GERANEXTERNALCE
GERANEXTERNALCE external
comprised GERANof an MCC cell YES
LTE LLPLMN three
Indicates digits.the mobile
LLPLMN
LLPLMN that
and is
an shared
MNC. among
ADD
LST The
network MNCcode consistsof theof
BTS3900, BTS3900 RMV multiple
The MCC operators.
consists of
GERANEXTERNALCE
GERANEXTERNALCE two to
external three
GERAN digits. cell YES
LTE GERANEXTERNALCE A PLMN
three ID
digits. is
LLPLMN
LLPLMN For
that example,
is shared ifamong
the
LLPLMN comprised
The MNC ofand an
consists MCC
ADD
LST
RMV MCC
Indicates
multiple is 123the
operators.mobile theof
BTS3900, BTS3900 GERANEXTERNALCE and
two
MNC an
to is MNC.
three
45, digits.
then the
GERANEXTERNALCE
GERANEXTERNALCE country
A PLMN code isof
IDconsists theof YES
LTE LLPLMN The
For
PLMN MCC
example,
IDUTRAN if the
isof12345.
LLPLMN
LLPLMN external
comprised an cell.
MCC
ADD
LST three
MCC
Indicates digits.
is 123theis and
mobile the
BTS3900, BTS3900 RMV A
andPLMN an ID
MNC.
UTRANEXTERNALCE
GERANEXTERNALCE The
MNC MNC
Indicates
network is 45, consists
the
code then
RNC of
theID
of the YES
LTE GERANEXTERNALCE comprised
The MCC of an
consists MCC of
LLPLMN
LLPLMN two
PLMN
of theto
external three
ID is
external
UTRAN digits.
12345. UTRAN
cell.
LLPLMN
ADD Indicates
and
three andigits.the RNC
MNC. cell
LST
RMV For
cell.
A PLMNexample,
The 28-bit
ID if
is UTRANthe
BTS3900, BTS3900 UTRANEXTERNALCE ID
The
The
MCC ofMCCan
MNC external
consists
consists
iscomprises
123 and the of
of
UTRANEXTERNALCE
GERANEXTERNALCE cell ID
comprised
UTRAN cell.of Itan MCC the YES
LTE LLPLMN three
two
MNC to digits.
three
is MNC.
45, digits.
then the
LLPLMN
LLPLMN RNC
and
uniquelyan
Indicates cell ID
the and
value
identifies the for
ADD
LST
RMV
The
For
PLMN
RNC
MNC
example,
IDID is
that if theaof
consists
12345.
are
BTS3900, BTS3900 UTRANEXTERNALCE The
two
MCC MCC
SectorID104
cell within
to three consists
an
is 123 and of
RNC.the
digits. the of
UTRANEXTERNALCE
UTRANEXTERNALCE represented by the YES
LTE LLPLMN three
external
The
For
MNC digits.
28-bit
example,
Indicates is CDMA2000
45,theUTRAN
thenif the
mobile the cell
LLPLMN
LLPLMN least
Indicates significant
the value 16 bits
for
ADD
LST The
high
ID
MCC
PLMN is
country MNC
rate
comprised
isID123is
code consists
packetand
12345.
ofthe data
of
the
the of
the
BTS3900, BTS3900 RMV and the
SectorID24 most of
UTRANEXTERNALCE
UTRANEXTERNALCE two
(HRPD)
RNC to
MNC cell
external three
cell.
is 45, IDthen
UTRAN digits.
The
and the value
cell YES
LTE UTRANEXTERNALCE significant
LLPLMN
LLPLMN
LLPLMN
external
For
begins
RNC
PLMN example,
Indicates
that is withis12
CDMA2000
IDshared
ID that
the 0x bits,
ifamong
are
12345. the
mobile
ADD
LST respectively.
high
MCC
followed rate
is 123
represented
network packet
by
code The
aand
by ofthedata
the
the
BTS3900, BTS3900 RMV multiple operators.
UTRANEXTERNALCE
UTRANEXTERNALCE formula
(HRPD)
MNC
maximum
least
external is for
cell.
45, of
significant
UTRAN calculating
The
then
26 value
the
16 bits
cell YES
LTE UTRANEXTERNALCE A PLMN ID is
LLPLMN
LLPLMN the
begins
PLMN UTRAN
hexadecimal
and
that the
is with
ID is
most
shared cell
0x
12345. ID
among is
LLPLMN comprised of
ADD
LST
RMV as follows:
followed
characters
significant
multiple by12 a an
UTRAN
(0
operators. to
bits,
MCC
9, andcell
BTS3900, BTS3900 UTRANEXTERNALCE and
ID = an
RNC MNC. ID x 65536 +
UTRANEXTERNALCE
ADD
UTRANEXTERNALCE maximum
A to F),
respectively.
A PLMN for of six
example,
The
IDconsists
is YES
LTE LLPLMN The
RNC MCC
cell ID. For of
LLPLMN
CDMA2000HRPDEXT
LLPLMN hexadecimal
0x123A.
formula
comprised The
for calculating
of an MCC
LST three
details,
charactersdigits.
see(03GPP to ID9, TSand
BTS3900, BTS3900 RMV
CELL hexadecimal
the
and UTRAN
an MNC. character
cell is
UTRANEXTERNALCE
ADD The
25.401.
A to MNC
F), for consists
example, of YES
LTE UTRANEXTERNALCE
LST string
as
The MCCcannot
follows: UTRANbegin
consists cell
of
LLPLMN
CDMA2000HRPDEXT two
0x123A.to three digits.
CDMA2000HRPDEXT with
ID
three
For 0,
RNC forThe
=example,
digits. example,
ID xif65536
the +
BTS3900, BTS3900 RMV
CELL
CELL hexadecimal
the
RNC value
cell cannot
ID. character
For be
ADD The
MCC MNC
is 123 consists
and theof YES
LTE UTRANEXTERNALCE
LST
MOD string
0x0123A.
details, cannot
see 3GPPbegin TS
CDMA2000HRPDEXT two
MNC tois three
45, digits.
then the
LLPLMN
CDMA2000HRPDEXT
CDMA2000HRPDEXT with 0, for example,
SECTORID128
25.401.
CELL For
PLMN example,
Indicates ID the
is if
12345.
band the
BTS3900, BTS3900 CELL
CELL the value
uniquely cannot mobile
identifies be
an
ADD
LST MCC
class is 123
on which andthe the YES
LTE MOD
RMV country
0x0123A.
EV-DO code
sector
MNC is 45, then (MCC)
in the of
CDMA2000HRPDEXT
CDMA2000HRPDEXT
CDMA2000HRPDEXT external
the external
SECTORID128 CDMA2000
Indicates
global
PLMN scopethe
ID packet and
is 12345. is
BTS3900, BTS3900 CELL Indicates
high
CDMA2000 rate the mobile data
CELL
CELL
LST
uniquely
frequency
comprised ofhigh
identifies
on which rate
an YES
LTE MOD
RMV network
(HRPD)
packet
EV-DO
the code
cell
data
sector
external
SECTORID104 (MNC)
(HRPD)
in and of
operates.the
CDMA2000HRPDEXT
CDMA2000HRPDEXT
ADD
CDMA2000HRPDEXT the
For
cell.
global external
details
scope about
and this
is
CDMA2000
SECTORID24. rate high
BTS3900, BTS3900 CELL
CELL
CDMA2000HRPDEXT
CELL CDMA2000
parameter,
A publicdata
comprised land high
see rate
3GPP
mobile
of(HRPD)
packet
SECTORID104 YES
LTE MOD
RMV
CELL packet
TS 36.331.
network
SECTORID104 data
(PLMN) (HRPD) IDais
and
cell operates.
uniquely identifies For
CDMA2000HRPDEXT
ADD
CDMA2000HRPDEXT
MOD cell.
comprised
SECTORID24. of an MCC
BTS3900, BTS3900 details
subnetwork aboutinthis the
CELL
CDMA2000HRPDEXT
CELL
CDMA2000HRPDEXT A
andpublic land
a mobile
SECTORID104 mobile
network NO
LTE parameter,
global scope seeand 3GPP
RMV
CELL
CELL network
code
uniquely
Indicates (PLMN)
(MNC).identifies
the pseudo IDais
ADD TS 36.331.
SECTORID24 uniquely
CDMA2000HRPDEXT
MOD
LST comprised
The
noise MCC
subnetwork (PN)an of a
consists
in mobile
the of
sequence
BTS3900, BTS3900 CDMA2000HRPDEXT
CELL identifies EV-DO
CDMA2000HRPDEXT
CDMA2000HRPDEXT country
three incode
sectordigits.
global
number scope
ofthe theand(MCC)
external NO
LTE CELL
CELL
CELL and
The an
MNC
SECTORID24
CDMA2000
subnetwork. MNC. consists
high of
uniquely
rate
ADD
MOD
LST The MCC consists
BTS3900, BTS3900 CDMA2000HRPDEXT two
packet or
identifies three
dataan EV-DOof
digits.
(HRPD)
CDMA2000HRPDEXT
CDMA2000HRPDEXT three
For
sector digits.
example,
in the if theis NO
LTE CELL cell. This number
CELL
CELL The
MCC MNC
Indicates is 123
subnetwork. consists
the name
and theofof
MOD used as the physical
BTS3900, BTS3900 LST two
the
MNC or three
external
is 45, digits.
the PLMN
CDMA2000HRPDEXT cell ID of the cell. For NO
LTE CDMA2000HRPDEXT For isexample,
CDMA2000
ID 12345. if the
HRPD
CELL details, see C.S0005
CELL MCC
cell. is 123 and the
LST PILOT_PN.
MNC is 45, the PLMN
CDMA2000HRPDEXT ID is 12345.
CELL
Indicates the cell ID of
the external
ADD CDMA2000 1xRTT
CDMA20001XRTTEXT cell. The cell ID and
CELL sector ID together
ADD
LST Indicates
uniquely identify the sector a ID
CDMA20001XRTTEXT
CDMA20001XRTTEXT Indicates
of the external
CDMA2000 thecell ID in of the
the
BTS3900, BTS3900 CELL
CELL network
CDMA2000
mobile switchingto which
1xRTT the
ADD
LST external
cell. The CDMA2000
cell IDInand YES
LTE MOD center (MSC). the
CDMA20001XRTTEXT
CDMA20001XRTTEXT
CDMA20001XRTTEXT 1xRTT
sector
CDMA2000 IDcell belongs.
together
1xRTT A
Indicates
base station the band
is a
BTS3900, BTS3900 CELL
CELL
CELL uniquely
network, identify
a cell ID a
ADD class
cellular onsystem
which the YES
LTE LST
MOD
RMV CDMA2000
uniquely CDMA2000
external celland
identifies in a a
the
CDMA20001XRTTEXT
CDMA20001XRTTEXT member
mobile of the
switching
CDMA20001XRTTEXT cellradio
1x withintransmission
the mobile
BTS3900, BTS3900 CELL
CELL network.
center Athe
(MSC). network A is
CELL
ADD Indicates
switching
technology
Indicates center
the (1xRTT)
system YES
LTE LST
MOD
RMV a subset
sector ID of
is a system
unique in a
CDMA20001XRTTEXT frequency
(MSC).
cell
ID ofoperates. on
Aexternal
cell which
ID
For
CDMA20001XRTTEXT
CDMA20001XRTTEXT
CDMA20001XRTTEXT that
CDMA2000
the istheidentified
external
consists of 12 cell by a
and
bits.
BTS3900, BTS3900 CELL
CELL details
CDMA2000
system about
ID. A this
1xRTT
network
CELL
CELL consists ofthefour
LTE ADD
LST
MOD
RMV
Indicates
CDMA2000
parameter,
cell.
in A
a system system see
is(MCC)IDbits.
mobile
1xRTT is cell
3GPP YES
CDMA20001XRTTEXT
CDMA20001XRTTEXT country
operates.
TS 36.331.
assigned by codeFor
to each details localof
CDMA20001XRTTEXT
CDMA20001XRTTEXT identified
the external a network
BTS3900, BTS3900 CELL
CELL about
mobile this parameter,
network and is
CELL
CELL ID. A3GPP
Indicates
CDMA2000 system the ID
mobile
1xRTT and a YES
LTE LST
MOD see
used TS
to determine 36.331.
RMV network
cell. ID
code together
(MNC) of
CDMA20001XRTTEXT
CDMA20001XRTTEXT
ADD
CDMA20001XRTTEXT whether aidentify
UE is in the
uniquely
the
A external
public land mobile a
BTS3900, BTS3900 CELL
CELL
CDMA20001XRTTEXT
CELL roaming state. ForID 0
network.
CDMA2000
network System
(PLMN) 1xRTT ID is YES
LTE MOD
RMV
CELL details about this
and
cell. network
comprised of IDan3GPP0MCC
CDMA20001XRTTEXT
ADD
CDMA20001XRTTEXT
MOD parameter, see
BTS3900, BTS3900 indicate
A
andpublic
a mobileall
land base mobile
network
CELL
CDMA20001XRTTEXT
CELL
CDMA20001XRTTEXT TS 36.331. NO
LTE stations
network
code (MNC).
Indicates outside
(PLMN)
the pseudo aID is
RMV
CELL
CELL
ADD specified
comprised
The MCC
noise network
of
(PN)consists a
sequence mobile and
of
CDMA20001XRTTEXT
MOD
LST
BTS3900, BTS3900 CDMA20001XRTTEXT are
countryreserved
three digits.
number code values.
(MCC)
of the external
CELL
CDMA20001XRTTEXT
CDMA20001XRTTEXT NO
LTE CELL Network
and
The
CDMA2000an
MNC IDconsists
MNC. 65535
1xRTTis of
CELL
CELL also reserved; thisisID
ADD
MOD The
two or
cell. MCC
This three consists
numberdigits. of
BTS3900, BTS3900 LST indicates thatphysical
CDMA20001XRTTEXT
CDMA20001XRTTEXT
ADD
CDMA20001XRTTEXT
three
used digits.
For example,
as the ifthethe NO
LTE CELL roaming
The
MCCID MNC status
isof123 consists
and ofthe UEsof
CELL
CDMA20001XRTTNC
CELL cell
Indicates the
the cell.
name
cell For
ID of
of
MOD
LST is
two
MNCnon-roaming
or
details, three
is see
45, the digits.
the PLMN in the
BTS3900, BTS3900 ELL the
whole external
neighboring
system no
CDMA20001XRTTEXT
ADD
CDMA20001XRTTEXT
LST For
ID isexample,
12345.of if the
description NO
LTE CDMA2000
matter
MCC iswhat
123 1xRTT
the
CELL
CDMA20001XRTTNC
CELL
CDMA20001XRTTNC PILOT_PN
Indicates
cell. The the
cell inand3GPP2
ID
ID
thethe
of
and
LST
ELL network
MNC
C.S0005. is ID
45, is.
the For
PLMN
BTS3900, BTS3900 ELL Local
sector
details, cell.
IDsee It the
uniquely
together
ADD
CDMA20001XRTTEXT
LST ID is 12345. YES
LTE MOD identifies
Indicates a
description ofsector
uniquely thecell
identify NIDwithin
a inID
CDMA20001XRTTNC
CELL
CDMA20001XRTTNC
CDMA20001XRTTNC an eNodeB.
of the neighboring
CDMA2000
3GPP2 C.S0005. cell in the
BTS3900, BTS3900 ELL
ELL
ELL
ADD CDMA2000
entire network. 1xRTT In the YES
LTE LST
MOD
RMV
CDMA20001XRTTNC cell. The
CDMA2000 1xRTT cell ID and
CDMA20001XRTTNC
CDMA20001XRTTNC
CDMA20001XRTTNC
ELL sector
network, ID atogether
cell ID
BTS3900, BTS3900 ELL
ELL
ELL Indicates the band
ADD
LST uniquely
uniquely identify identifies aa YES
LTE MOD
RMV class on which the
CDMA20001XRTTNC
CDMA20001XRTTNC CDMA2000
cell within the cell within
mobile
CDMA20001XRTTNC
CDMA20001XRTTNC neighboring
BTS3900, BTS3900 ELL
ELL the MSC. center
switching A sector ID
ELL
ELL Indicates
CDMA2000 the
LTE ADD
LST
MOD Indicates
is unique
(MSC). the
in
A cell a1xRTT
system
ID cell YES
RMV frequency
operates. oncell
For which
CDMA20001XRTTNC
CDMA20001XRTTNC
CDMA20001XRTTNC
CDMA20001XRTTNC
ID of the of
CDMA2000
consists 12 details
neighboring and
bits.
ELL the
about neighboring
CDMA2000
consists thisofparameter,
41xRTT
bits.
BTS3900, BTS3900 ELL
ELL
ELL
ADD
LST CDMA2000
see 3GPP
cell. A system TS 1xRTT ID is cell
36.331. YES
LTE MOD
RMV
CDMA20001XRTTNC
CDMA20001XRTTNC operates.
assigned to For eachdetails local
CDMA20001XRTTNC
CDMA20001XRTTNC
BTS3900, BTS3900 ELL
ELL about
mobilethis parameter,
network and is
ELL
ELL YES
LTE LST
MOD see
used3GPP
Indicates TSnetwork
the
to determine 36.331.
RMV
CDMA20001XRTTNC
CDMA20001XRTTNC
ADD ID of the neighboring
whether a UE is in the
BTS3900, BTS3900 ELL
ELL
CDMA20001XRTTNC
ELL CDMA2000
roaming state. 1xRTT For YES
LTE MOD
RMV
ELL cell.
details For details
about
Indicates whether this aboutto
CDMA20001XRTTNC
ADD
CDMA20001XRTTNC
MOD this parameter,
parameter,
permit see see
or prohibit 3GPP
BTS3900, BTS3900 ELL
CDMA20001XRTTNC
ELL 3GPP
TS 36.331. TS 36.331.
CDMA20001XRTTNC handovers from the NO
LTE RMV
ELL Indicates whether to
ELL local cell to the
CDMA20001XRTTNC
MOD
LST permit or
neighboring cell. prohibit
BTS3900, BTS3900 ELL
CDMA20001XRTTNC
CDMA20001XRTTNC removal of the NO
LTE
ELL
ELL neighboring
Indicates whether ANR
ADD
LST
LST relationship by ANR.
BTS3900, BTS3900 CDMA20001XRTTNC with CDMA2000
CDMA20001XRTTNC
CDMA20001XRTTNC NO
LTE ELL 1xRTT cells is
ELL
ELL
ADD
MOD enabled.
BTS3900, BTS3900 CDMA20001XRTTNC Indicates the name of
CDMA20001XRTTNC NO
LTE ELL the local cell.
ELL Indicates the name of
MOD
LST
BTS3900, BTS3900 the neighboring
CDMA20001XRTTNC
CDMA20001XRTTNC NO
LTE CDMA2000 1xRTT
ELL
ELL cell.
LST
CDMA20001XRTTNC
ELL
ADD
CDMA2000BANDCLA
SS
ADD
LST Indicates the
CDMA2000BANDCLA
CDMA2000BANDCLA Indicates the cell ID of
neighboring
BTS3900, BTS3900 SS
SS the local cell. It
CDMA2000 band YES
LTE LST
MOD uniquely identifies a
class. Signals
Indicates on ato
CDMA2000BANDCLA
CDMA2000BANDCLA
ADD cell withinwhether
Indicates
frequency the
an
within absolute
eNodeB.the
BTS3900, BTS3900 SS
SS configure
priority of thecell
CDMA2000BANDCLA band class can be YES
LTE MOD
RMV reselection
CDMA2000 priorities
1xRTT
SS obtained by UEs. For
CDMA2000BANDCLA
ADD
CDMA2000BANDCLA for
band CDMA2000
class to be1xRTT
used
MOD details, see the
BTS3900, BTS3900 SS
CDMA2000BANDCLA
SS band
during class. If this
cell reselection.
CDMA2000BANDCLA BandclassCDMA2000 NO
LTE RMV
SS parameter
Indicates
The value the
0isindicates
set
RX to signal
SS Indicates
IE definedwhether
Indicates theinthe3GPP
absolute to
ADD
CDMA2000BANDCLA
MOD NOT_CFG,
level
the required
lowest for
priority. cell
a cell
BTS3900, BTS3900 LST configure
36.331.
priority of thecell
CDMA2000BANDCLA
SS
CDMA2000BANDCLA reselection
on a frequency
Frequencies priorities
used in thefor NO
LTE CDMA2000BANDCLA reselection
CDMA2000 priorities
HRPD
SS
SS are not
lower-priority
different delivered
RATs must in the
be
SS
ADD for
band CDMA2000
class toHRPDbeHRPDused
MOD
LST system
CDMA2000
assigned information.
different cell
BTS3900, BTS3900 CDMA2000BANDCLA band
during class. If
cell reselection.this
CDMA2000BANDCLA
CDMA2000BANDCLA band
reselectionclass to become
priorities. NO
LTE SS parameter
The value 0isforset
indicatesto
SS
SS a
Thecandidate
information cell
is
ADD
MOD NOT_CFG,
the lowest in the
priority. cell
BTS3900, BTS3900 LST reselection.
contained
Indicates the SIB8.
mobile For
CDMA2000BANDCLA
CDMA2000BANDCLA
ADD reselection
Frequencies priorities
used for NO
LTE CDMA2000BANDCLA After
details,
country measurements
see
code 3GPPof the TS
SS
SS
GERANEXTERNALCE are not delivered
different RATs must in the
be
SS are started
36.331.
external cell. for cells on
MOD
LST
LL system
assigned information.
different cell
BTS3900, BTS3900 a frequency
Indicates
The PLMNthe inmobile
consiststhe of
CDMA2000BANDCLA
ADD
CDMA2000BANDCLA
LST reselection priorities. NO
LTE band
network
the MCC class,
code a
and theis cell
of theon
SS
GERANEXTERNALCE
SS
GERANEXTERNALCE The information
the frequency
external
MNC. cell. can
BTS3900, BTS3900 LST
LL
LL contained in SIB8. For
ADD become
The
The PLMN
MCC a consists
candidate
consists ofof YES
LTE CDMA2000BANDCLA
LST
MOD details, see 3GPP TS
GERANEXTERNALCE for
Indicates the cell IDifof
the
threereselection
MCC digits.and only
the
SS
GERANEXTERNALCE
GERANEXTERNALCE 36.331.
LL the
TheRX
MNC.
the MNC
externalsignalconsists level of
GERAN of
BTS3900, BTS3900 LL
LL the cell is lower than
ADD
LST The
two to
cell. MCC consists
three digits.
It uniquely of YES
LTE MOD
RMV the
GERANEXTERNALCE
GERANEXTERNALCE
GERANEXTERNALCE For value
three digits.
example,
identifies aspecified
GERAN MCC by =
GERANEXTERNALCE
LL this
The parameter
MNC consists for aof
BTS3900, BTS3900 LL
LL 123,
cell MNC
within =
the 45,area PLMN
LL
LST Indicates
time-to-trigger.
two to three thedigits.
GERANFor YES
LTE MOD
RMV = 12345.
specified
Indicates by
the the
LAC of
GERANEXTERNALCE band
details,
For indicator.
see
example, 3GPP MCCIf theTS
=
GERANEXTERNALCE
ADD
GERANEXTERNALCE location
Indicates
the
GERAN external area
whether
ARFCN identity
GERAN to
is a
BTS3900, BTS3900 LL
LL 36.304
123,
(LAI). MNCAn5.2.4.5.
LAI = 45, PLMN
consists
GERANEXTERNALCE
LL set
cell.
value the
It inrouting
uniquely
the range areaof YES
LTE MOD
RMV
LL =
of 12345.
codethe MCC, MNC, and
GERANEXTERNALCE 512 to(RAC)
identifies 810, of
a location
the the
value
ADD
GERANEXTERNALCE
MOD LAC.
external
within GERAN cell.
BTS3900, BTS3900 LL of this aparameter
PLMN. is
GERANEXTERNALCE
LL
GERANEXTERNALCE This
LTE RMV usedparameter
to indicateis NO
LL
LL required if the external
ADD
GERANEXTERNALCE whether the GERAN
MOD
LST GERAN cell supports
BTS3900, BTS3900 GERANEXTERNALCE
LL ARFCN is
Indicates the networkin the 1800
GERANEXTERNALCE
GERANEXTERNALCE packet switched (PS) NO
LTE LL MHz band
color codethe or
(NCC) the 1900
of
LL
LL Indicates
services.
Indicates the base
GERAN
ADD
MOD MHz
GERAN.
station band.
colorIt If
is the
operator-
code
BTS3900, BTS3900 LST BCCH ARFCN. For
GERANEXTERNALCE
GERANEXTERNALCE GERAN
specific
(BCC) ARFCN
and
ofseean 3GPP identifies
external is not NO
LTE GERANEXTERNALCE details, TS
LL
LL in
a either
network
GERAN band,
within
cell. This this
the
ADD
MOD 45.005.
parameter
whole does
country.The not
BTS3900, BTS3900 LST parameter is used the to
GERANEXTERNALCE Indicates
take
baseeffect whether
transceiver and can be NO
LTE GERANEXTERNALCE discriminate
cell supports external
the dual
LL set to either
LL
LL
ADD
station
GERAN
transmission cellsvalue.
identity codeFor
working
mode. If
MOD
LST details,
(BSIC) see
consists 3GPP TS
of the
BTS3900, BTS3900 GERANEXTERNALCE at
the the
cell same
supports the
GERANEXTERNALCE
GERANEXTERNALCE 36.331.
NCC and the base NO
LTE LL frequency.The
dual transmission base
LL
LL station colorstation code
ADD
MOD transceiver
mode, both CS and PS
LST (BCC). For details,
BTS3900, BTS3900 GERANEXTERNALCE
GERANEXTERNALCE identity
services code
can (BSIC)see
be NO
LTE GERANEXTERNALCE 3GPP TSof23.003.
LL
LL consists
handed over the toBCCthe cell
LL
MOD
LST and the
Indicates network
at the same time. the name
mobile color of
BTS3900, BTS3900 code (NCC). For
GERANEXTERNALCE
GERANEXTERNALCE the external
country
Otherwise, onlycode GERAN
of the CS NO
LTE ADD
LL GERANNCELL
LL details,
cell.
neighboring
service
Indicates see
or the
the 3GPP PS IDTS
GERAN
cell of
DSP
LST GERANRIMINFO 23.003.
Indicates
cell.
service can the bemobile
BTS3900, BTS3900 the Local cell. Ithanded
LST GERANNCELL
GERANEXTERNALCE network
The
over PLMN code of the
consists YES
LTE ADD uniquely to the cell.
identifies a of
LL GERANNCELL
MOD GERANNCELL neighboring
the
cell MCC
withinand GERAN
the
an eNodeB.
LST
RMVGERANNCELL
GERANNCELL cell.
BTS3900, BTS3900 MNC.
MOD GERANNCELL The YES
LTE ADD The PLMNMCC consists consistsofof
RMV GERANNCELL
GERANNCELL the MCC and the
LST three digits.
BTS3900, BTS3900 DSP GERANNCELL
GERANRIMINFO MNC.
MOD GERANNCELL The MNC consists of YES
LTE Indicates
The
two to MCC three the
consistsLAC of
digits. of
ADD
RMV GERANNCELL
GERANNCELL the
three GERANdigits.
For example, MCC =
LST
DSP GERANNCELL
GERANRIMINFO
BTS3900, BTS3900 neighboring
The
123, MNC MNC consists = cell.
45, PLMN It of
MOD GERANNCELL YES
LTE uniquely
two to three digits. a
= 12345. identifies
RMV GERANNCELL
location
For example, withinMCC a =
DSP GERANRIMINFO
PLMN.
123, MNC = 45, PLMN
= 12345.
Indicates the cell ID of
the GERAN
neighboring cell. It
ADD GERANNCELL
uniquely identifies a
LST GERANNCELL
BTS3900, BTS3900 GERAN cell within the
MOD GERANNCELL YES
LTE area
Indicatesspecified
whether by the to
RMV GERANNCELL Indicates whether the
ADD GERANNCELL locationorarea
permit prohibitidentity
BTS3900, BTS3900 DSP GERANRIMINFO neighboring GERAN
MOD GERANNCELL (LAI). An
removal of the LAI consists NO
LTE cell
of theoverlaps
MCC, MNC, the E-and
LST GERANNCELL neighboring
Indicates whether
ADD GERANNCELL UTRAN
LAC.
relationship cell. The
BTS3900, BTS3900 handovers
default value ofbyis
UEsANR.
NO. to
MOD GERANNCELL
ADD NO
LTE the neighboring
The parameter value cell
LST GERANNCELL
GERANNFREQGROU
ADD GERANNCELL are
YESprohibited.
indicates that the
BTS3900, BTS3900 P
MOD
LST GERANNCELL
ADD neighboring
Indicates GERAN
a GERAN NO
LTE
LST GERANNCELL
GERANNFREQGROU
GERANNFREQGROU cell
Indicates the the
carrieroverlaps
frequency cell E- ID of
BTS3900, BTS3900 P
P UTRAN
group.
the local Incell.
the The
cell. cell
It
LST parameter
reselection value
procedure, NO YES
LTE MOD uniquely identifies a
GERANNFREQGROU
GERANNFREQGROU
ADD indicates
the GERAN that
cell within an eNodeB. the
carrier
BTS3900, BTS3900 P
P
GERANNFREQGROU neighboring are
frequencies GERAN
Indicates
cell does not the overlap
GERAN YES
LTE MOD
RMV
P organized
band in
indicator. groupsIf the
GERANNFREQGROU Indicates
Indicates
the E-UTRAN
and the cell the
the first
standard
cell.
reselection
ADD
GERANNFREQGROU
MOD GERAN ARFCN is
BTS3900, BTS3900 P ARFCN
that in the
is supported
parameters are GERAN by
GERANNFREQGROU
P
GERANNFREQGROU between 512 and 810, NO
LTE RMV carrier
the
provided frequency
current percarrier
group of
P
P this parameter
ADD
GERANNFREQGROU group.
frequency
GERAN If the GERAN
group.
carrier
MOD
LST indicates
BTS3900, BTS3900 GERANNFREQGROU
P ARFCN
frequencies. iswhether
not between the
GERANNFREQGROU
GERANNFREQGROU GERAN NO
LTE P 512 and 810, one in
ARFCN is
P
P the 1800can MHz band
ADD
MOD ARFCN only in or
BTS3900, BTS3900 LST the
GERANNFREQGROU
GERANNFREQGROU one1900frequency MHz band. band. If NO
LTE GERANNFREQGROU the
PARFCN
P For GERAN
details, see ARFCN 3GPP is
P
ADD Indicates
not in either theband,
cell IDthis of
LST
LST TS 45.005.
BTS3900, BTS3900 GERANNFREQGROU the local cell.
parameter does It not
GERANNFREQGROU
GERANNFREQGROU Indicates the index YES
LTE PARFCN
PARFCN
uniquely
take effect
Specifies
identifies
and
the canaof
ARFCN be
P
ADD the
cell BCCH
within carrier
an eNodeB.
LST
RMV set
of to either
the GERAN value BCCH. and
BTS3900, BTS3900 GERANNFREQGROU frequency
one group. It
LTE
GERANNFREQGROU
GERANNFREQGROU If theARFCN
identifiesGERAN a
can
BCCH ARFCNonly YES
PARFCN
PARFCN
PARFCN in oneisfrequency band.
value
carrier not between
frequency
LST
RMV
ADD For details, see 3GPP
BTS3900, BTS3900 512 and 810, one
group.
GERANNFREQGROU
GERANNFREQGROU
INTRAFREQBLKCELL TS 45.005. YES
LTE ARFCN can only in
PARFCN
PARFCN
LST Indicates the cell ID of
one frequency band.
BTS3900, BTS3900 RMV
ADD
INTRAFREQBLKCELL the
For local
details cell.
about It this
YES
LTE GERANNFREQGROU
INTRAFREQBLKCELL
MOD Indicates
uniquely the starting
identifies a
parameter, see 3GPP
PARFCN
LST
INTRAFREQBLKCELL physical
cell within cell
an ID of
eNodeB. the
TS 45.005.
BTS3900, BTS3900 INTRAFREQBLKCELL
RMV intra-frequency
ADD YES
LTE MOD
INTRAFREQBLKCELL blacklisted cell. For
INTRAFREQBLKCELL
INTRAFREQBLKCELL details, see
Indicates the3GPPnameTS of
BTS3900, BTS3900 MOD
RMV 36.331.
ADD
ADD the intra-frequency
Indicates the physical NO
LTE INTRAFREQBLKCELL
INTRAFREQBLKCELL
EUTRANINTRAFREQ
INTRAFREQBLKCELL blacklisted
cell ID range cell.of the
LST Indicates the mobile
BTS3900, BTS3900 NCELL
MOD
INTRAFREQBLKCELL intra-frequency
ADD
LST country code of For
the E- NO
LTE INTRAFREQBLKCELL blacklisted cell.
EUTRANINTRAFREQ
EUTRANINTRAFREQ
LST UTRAN
Indicates
details, neighboring
see the cell IDTS of
BTS3900, BTS3900 NCELL Indicates
Indicates
cell.
the local cell.the3GPP
the eNodeB
mobile
It
INTRAFREQBLKCELL 36.331.
identity of the intra- YES
LTE ADD
LST
MOD network
The
uniquelyPLMN code of
consists
identifies the E-
a of
EUTRANINTRAFREQ
EUTRANINTRAFREQ frequency
UTRAN
the MCC neighboring
neighboring
and the
EUTRANINTRAFREQ cell
cell. within an
It uniquely eNodeB.
BTS3900, BTS3900 NCELL
NCELL
NCELL cell.
Indicates
MNC. the local
ADD
LST identifies
The
identityPLMN ofan eNodeB
consists
the intra-ofof YES
LTE MOD
RMV The MCC consists
EUTRANINTRAFREQ
EUTRANINTRAFREQ
EUTRANINTRAFREQ within
the
three MCC
frequency a PLMN.
digits.and the
neighboring The
EUTRANINTRAFREQ
NCELL 28-bit E-UTRAN cell
BTS3900, BTS3900 NCELL
NCELL
NCELL MNC.
cell.
The MNC It uniquely
consists of
ADD
LST identity is comprised YES
LTE MOD
RMV The MCC
identifies
two to three consists
a cell
digits.within of of
EUTRANINTRAFREQ
EUTRANINTRAFREQ the cell identity and
EUTRANINTRAFREQ
EUTRANINTRAFREQ
NCELL
Indicates
three
an
ForeNodeB.digits.the
example,The cell
MCC =the
28-bit
BTS3900, BTS3900 NCELL
NCELL
NCELL eNodeB
individual
The
E-UTRAN MNC identity
offset
consists
123, MNC = 45, PLMNcell for
identity the
of
LST YES
LTE MOD
RMV (represented
intra-frequency
two
is to three digits.
comprised
= 12345. bythe
of thecell
EUTRANINTRAFREQ
EUTRANINTRAFREQ
ADD
EUTRANINTRAFREQ most significant
neighboring
For example, cell,
MCC 20which
=
identity (represented
BTS3900, BTS3900 NCELL
NCELL
EUTRANINTRAFREQ
NCELL bits).
is
123,used The
MNC in cell global
evaluation
= 45, PLMN
by the least significant YES
LTE MOD
RMV identity (CGI)
NCELL for
= handovers.
12345.
eight bits) andofthe It an E-
EUTRANINTRAFREQ
EUTRANINTRAFREQ
MOD UTRANthe
affects cell is The
probability
BTS3900, BTS3900 eNodeB identity.
NCELL
NCELL
EUTRANINTRAFREQ comprised
of ofintra-
the E-
LTE celltriggering
global identity NO
RMV
NCELL UTRAN
frequency cell identity
(CGI) of an E-UTRAN
EUTRANINTRAFREQ
LST and the
measurement PLMNreports. ID.ofFor
cell is comprised the
NCELL
EUTRANINTRAFREQ details,
A larger see
value 3GPP of TS
this
E-UTRAN cell identity
NCELL 36.413.
parameter
and the PLMN indicatesID. For a
higher
details,probability.
see 3GPP For TS
details,
36.413. see 3GPP TS
36.331.
neighboring cell, which
is used in evaluation
for cell reselections. A
larger value of this
ADD parameter results in a
EUTRANINTRAFREQ lower probability of cell
NCELL reselections. If this
ADD
MOD parameter is not set to
BTS3900, BTS3900 EUTRANINTRAFREQ
EUTRANINTRAFREQ dB0, it is delivered in NO
LTE NCELL
NCELL SIB4.
Indicates For whether
details, see
ADD
MOD
LST 3GPP
BTS3900, BTS3900 EUTRANINTRAFREQ handovers36.331.
TS of UEs Ifto
EUTRANINTRAFREQ
EUTRANINTRAFREQ this parameter iscellset to NO
LTE NCELL the neighboring
Indicates whether to
NCELL
NCELL dB0,prohibited.
it is not delivered
ADD
MOD are
permit or prohibit
BTS3900, BTS3900 LST in SIB4. In this
EUTRANINTRAFREQ
EUTRANINTRAFREQ removal
LTE EUTRANINTRAFREQ
NCELL situation,ofUEs the use 0 NO
NCELL
NCELL neighboring
dB as the offset for cell
ADD
MOD
LST relationship
BTS3900, BTS3900 EUTRANINTRAFREQ Indicates theby
reselections. name
For ANR.of
EUTRANINTRAFREQ
ADD
EUTRANINTRAFREQ Indicates the3GPP presetTS NO
LTE NCELL the localsee
details, cell.
NCELL
EUTRANINTERNFRE
NCELL Indicates
MOD
LST 36.304. the
proportion of UEs nameinof
BTS3900, BTS3900 Q the
idle intra-frequency
mode in a
EUTRANINTRAFREQ
ADD
EUTRANINTRAFREQ
LST NO
LTE neighboring
frequency. This E-UTRAN
NCELL
EUTRANINTERNFRE
NCELL
EUTRANINTERNFRE Indicates the cell effectID of
cell.
parameter takes
BTS3900, BTS3900 LST
Q
Q the local cell. It
EUTRANINTRAFREQ Indicates
when the the DL YES
LTE LST
MOD uniquely identifies
NCELL EARFCN
Indicates of the a
InterFreqIdleMlbSwitch
the
EUTRANINTERNFRE
EUTRANINTERNFRE
ADD Indicates
cell within the
ancell uplink
eNodeB. E-
neighboring
option
measurement of the on the
BTS3900, BTS3900 Q
Q
EUTRANINTERNFRE UTRA
Indicates absolute
whether radio to
neighboring
MlbAlgoSwitch
bandwidth ofE-UTRAN
the inter- YES
LTE MOD
RMV
Q frequency
Indicates
configure channel
the
the RX
uplink level E-
frequency.
parameter
frequency in
For the
neighboring details,
EUTRANINTERNFRE
ADD
EUTRANINTERNFRE
MOD number
required
UTRA (EARFCN)
for
absolute a radio of
BTS3900, BTS3900 see
CellAlgoSwitch
the
Indicates
cell 3GPPthe
on the channel TS MO
minimum
frequency.
Q
EUTRANINTERNFRE
Q
EUTRANINTERNFRE the inter-frequency
neighboring
frequency cell onforthe NO
LTE 36.104.
and
RX
The the
level
setting Proportion
requiredof thisIf the a
RMV
Q
Q neighboring
frequency
number to
(EARFCN) cell.
become fora
ADD option
neighboring
parameter of the cell
depends on the
on
EUTRANINTERNFRE
MOD value of this
BTS3900, BTS3900 LST
EUTRANINTERNFRE
Q
candidate
the
InterFreqIdleMlbMode
frequency
the bandwidth to parameter
for
inter-frequency
Indicates the RX level
become a
EUTRANINTERNFRE
EUTRANINTERNFRE is not specified,
reselection
neighboring
required
parameter
candidate forfor
inifacell.
the
the the NO
LTE Q configuration of the
Q
Q default
priority
neighboring
CellMlb
reselection uplink
ofMO the cell
ifare EARFCN
the on the
ADD
MOD
LST cell.
is In E-UTRAN,
used,
Indicates which
whether is a a
to
BTS3900, BTS3900 frequency
selected.
priority of is
The
the higher
to become eNodeB
EUTRANINTERNFRE
EUTRANINTERNFRE
EUTRANINTERNFRE cell bandwidth
calculated
enable orcell based
disable is also
on NO
LTE than
suitable
transfers
frequencythat of the
normally
is for
lower serving
Q
Q
Q expressed
the downlink
measurement in units
EARFCN.
for of
ADD frequency.
selection.
released
than that UEs It After
is included
of thetoserving
MOD
LST resource
For details blocks
frequency-priority- about (RBs).
this
BTS3900, BTS3900 EUTRANINTERNFRE measurements
in criteria SAfter
frequencies
frequency. and
based are
used on
EUTRANINTERNFRE
EUTRANINTERNFRE Cell bandwidths
parameter,
based see are
inter-frequency 1.4
3GPP NO
LTE Q started
in
the the for proportions
neighboring
evaluation
preset
measurements for
Q
Q MHz,
TS 3 MHz,
36.104.
handovers 5During
tofrequency,MHz,
ADD
MOD cells
cell
among
started on theneighboring
selection.
frequencies,
for so
BTS3900, BTS3900 LST 10 MHz,
Indicates
neighboring 15 MHz,
thefrequency,
offset and to
EUTRANINTERNFRE
EUTRANINTERNFRE the
that
cells UE
load
on reselects
evaluation balancing
the fortocell a
for NO
LTE EUTRANINTERNFRE 20
the MHz
RSRP
frequencies. correspond
threshold
In UE to
Q
Q neighboring
reselection,
UEs
the UEin idle
reselects cell
the
mode ontois thea
Q
ADD 6
forRBs,
events 15
frequency-priority- RBs,
A4 and 25 A5
MOD
LST frequency
performs
achieved.
neighboring theonly
The ifon
following
cell sum thethe of
BTS3900, BTS3900 EUTRANINTERNFRE RBs,
that
based
RX 50
trigger
level RBs,
handovers,
ofonly the 75
coverage- cell RBs,if=is
EUTRANINTERNFRE
EUTRANINTERNFRE calculation:
proportions
frequency Srxlev
for load
if the NO
LTE Q and
based
the
better 100
eNodeB
than RBs,
inter-frequency
thedelivers
value
Q
Q Measured
balancing
RX level RSRP
ofamongthe servingvalue
all
ADD
MOD
LST respectively.
handovers.
frequencies
specified
of a by
neighboring In
to
this be cell
BTS3900, BTS3900 frequencies
cell is lower than cannot a
EUTRANINTERNFRE
EUTRANINTERNFRE
EUTRANINTERNFRE coverage-based
measured
parameter
on the frequency based
for a time- -on NO
LTE exceed
specified 100%.
threshold
Q
Q handovers,
frequency
to-trigger.
Value of of For
this thedetails,
ADD Proportion
and that for
the load
cell is
MOD
LST eNodeB
configuration,
see 3GPP
parameter delivers
-TS the
36.331. the
BTS3900, BTS3900 EUTRANINTERNFRE balancing
higher than at thethe value
EUTRANINTERNFRE RSRP
frequencies
Indicates
Compensated threshold
the with power.for
the NO
LTE Q serving
specifiedfrequency
by this =
Q event A4 orfor aA5cell
Q
ADD
MOD
LST
FreqPriBasedHoMeas
frequency
If Srxlev
100%
parameter for
– (proportion a to time- UEs,
is at
BTS3900, BTS3900 which
Flag
measurement
better
frequency
to-trigger.is
than equal
parameter toset theto
priority.
1a+threshold
For details,
EUTRANINTERNFRE
EUTRANINTERNFRE
EUTRANINTERNFRE NO
LTE sum
ENABLE
A
for
see of
larger
a3GPP the can
value TSbe
time-to-trigger,
proportion at 36.331.
Q
Q
Q InterFreqHoA4ThdRsr
measured,
indicates
reselection
frequency a2and higher
to+ the…the +cell
MOD
LST
ADD
BTS3900, BTS3900 p
is and
frequencies
priority.
started. For
proportion atwith the
details,
EUTRANINTERNFRE
EUTRANINTERNFRE
INTERFREQBLKCELL NO
LTE IfHoThdRsrpOffset
FreqPriBasedHoMeas
see 3GPP n).
frequency TS 36.304.
Q
Q
LST Indicates the cellset IDIftoof
parameter
Flag
If the parameter values.
BTS3900, BTS3900 LST
ADD
INTERFREQBLKCELL the local cell. It be
the RSRP
DISABLE
INTER_FREQ_IDLE_ threshold
cannot YES
LTE EUTRANINTERNFRE
INTERFREQBLKCELL
MOD uniquely
for event identifies
measured.
Indicates
MLB_SWITCH A4
theor A5 ais
DLoption
Q
LST
INTERFREQBLKCELL cell within anthe eNodeB.
ADD less
EARFCN than the
of
of the MlbAlgoSwitch minimuminter-
BTS3900, BTS3900 INTERFREQBLKCELL
RMV RSRP value, the
INTERFREQBLKCELL frequency
parameterthe
Indicates blacklisted
in the starting YES
LTE MOD
INTERFREQBLKCELL minimum value issee
LST cell.
physicalFor details,
ENodeBAlgoSwitchcell ID of the
INTERFREQBLKCELL delivered instead.
BTS3900, BTS3900 INTERFREQBLKCELL 3GPP
MO and TSthe
inter-frequency 36.104. If
RMV the RSRP threshold YES
LTE ADD
MOD
INTERFREQBLKCELL ADAPTIVE_PROPOR
blacklisted cell. For
INTERFREQBLKCELL for
TION eventoption A43GPP or the A5 is
INTERFREQBLKCELL details,
Indicates
greater
see
thantheof nameTS
the of
BTS3900, BTS3900 MOD
RMV InterFreqIdleMlbMode
36.331.
ADD the inter-frequency
maximum
Indicates RSRP
the physical NO
LTE INTERFREQBLKCELL
INTERFREQBLKCELL parameter in the
INTERFREQBLKCELL blacklisted
value,
cell ID therange cell.
maximum of the
LST eNodeBMlb MO are
BTS3900, BTS3900 MOD
INTERFREQBLKCELL value is delivered
inter-frequency
selected, the eNodeB
instead. NO
LTE INTERFREQBLKCELL blacklisted
adaptively adjusts cell. Forthe
LST details,
proportions ofsee 3GPP UEsTS in
INTERFREQBLKCELL 36.331.
idle mode among
frequencies based on
UE distribution in the
network, ensuring that
the proportions of UEs
in idle mode among
ADD
EUTRANINTERFREQ
NCELL Indicates the mobile
ADD
LST country code of the E-
EUTRANINTERFREQ
EUTRANINTERFREQ UTRAN
Indicates neighboring
the cell ID of
NCELL Indicates
Indicates
cell. the
the eNodeB
mobile
BTS3900, BTS3900 NCELL the local
identity ofcell.
the Itinter-
ADD
LST network
The PLMN code of the
consists E- YES
LTE MOD uniquely
frequency identifies
neighboring a of
EUTRANINTERFREQ
EUTRANINTERFREQ
EUTRANINTERFREQ UTRAN
the
cell MCC neighboring
and
within an eNodeB. the
BTS3900, BTS3900 NCELL
NCELL cell.
MNC.It uniquely
cell.
Indicates the local
NCELL
ADD identifies YES
LTE LST
MOD
RMV The
The PLMN
identity
MCC ofanthe eNodeB
consists
consistsinter-ofof
EUTRANINTERFREQ
EUTRANINTERFREQ within
the MCC
frequency
three a PLMN.
digits.and the
neighboring The
EUTRANINTERFREQ
BTS3900, BTS3900 NCELL
NCELL 28-bit
MNC.
cell.
The MNC E-UTRAN
It uniquely
consists cell
of
NCELL
ADD
LST identity is comprised YES
LTE MOD
RMV The MCC
identifies
two to three consists
a cell
digits. withinof of
EUTRANINTERFREQ
EUTRANINTERFREQ the cell identity and
EUTRANINTERFREQ
EUTRANINTERFREQ
NCELL
three
an digits.
ForeNodeB.
example,The MCC =the
28-bit
BTS3900, BTS3900 NCELL
NCELL
NCELL eNodeB
The
E-UTRANMNC identity
consists
cell
123, MNC = 45, PLMN identityof
LST YES
LTE MOD
RMV (represented
two
is to three digits.
comprised
= 12345. bythe
of thecell
ADD
EUTRANINTERFREQ
EUTRANINTERFREQ
ADD
EUTRANINTERFREQ most significant
For example, 20
MCC =
EUTRANEXTERNALC identity (represented
BTS3900, BTS3900 NCELL
NCELL
EUTRANINTERFREQ
NCELL bits).
123, The cell global
ELL by theMNC least = significant
45, PLMN YES
LTE MOD
RMV identity (CGI)
NCELL
ADD
ADD
= 12345. and the E-
eight bits)whether
Indicates
of an
EUTRANINTERFREQ
ADD
EUTRANINTERFREQ
MOD UTRAN cell
Indicates the is The
BTS3900, BTS3900 EUTRANEXTERNALC
EUTRANEXTERNALC
NCELL
EUTRANINTERFREQ
NCELL
eNodeB
handovers
comprised of mobile
identity.
of UEsE-to
the
EUTRANINTERFREQ
ELL country
cell global code of the
identity NO
LTE ELLBAND
RMV
NCELL the neighboring
Indicates
UTRAN whether cellto
NCELL
ADD
ADD
LST
external
(CGI)
are of cell
E-UTRAN
an
prohibited.
identity
E-UTRAN
EUTRANINTERFREQ
MOD Indicates
permit
and or the
prohibiteNodeB
BTS3900, BTS3900 LST
EUTRANEXTERNALC
EUTRANEXTERNALC
EUTRANEXTERNALC cell is comprised ofFor
cell. the
Indicates PLMN
the ID.
mobile the
NCELL
EUTRANINTERFREQ
EUTRANINTERFREQ identity
removal
details,
network
The PLMN of
ofthe
see
code the
3GPPexternal
of
consists theTS of NO
LTE ELL
ELLBAND
ELL E-UTRAN cell identity
NCELL
NCELL
ADD E-UTRAN
neighboring
36.413.
external
the
and MCC
the PLMN cell.the
E-UTRAN
and It For
ID.
ADD
LST
LST
BTS3900, BTS3900 LST
EUTRANEXTERNALC uniquely
relationship
cell.
Indicates
MNC.
details, see identifies
bycell
the3GPP ANR. an
TS
EUTRANEXTERNALC
EUTRANEXTERNALC
EUTRANEXTERNALC YES
LTE EUTRANINTERFREQ
ELL eNodeB
The PLMN
identity
The
36.413.MCC within
consists
of consists a
the external ofof
ELLBAND
ELL
ELLBAND
NCELL
ADD PLMN.
the MCC
E-UTRAN The
three digits. and 28-bit
cell. theIt E-
LST
LST
MOD
BTS3900, BTS3900 EUTRANEXTERNALC UTRAN
MNC.
uniquely
The MNC cell identityaofis
identifies
consists
EUTRANEXTERNALC
EUTRANEXTERNALC
EUTRANEXTERNALC YES
LTE ELLBAND comprised
The
cell MCC
two within
to three of the cell
consists
andigits.
eNodeB. of
ELL
ELLBAND
ELL
LST identity
three
The 28-bit
For example, and the
digits.E-UTRAN MCC =
LST
MOD
RMV
BTS3900, BTS3900 EUTRANEXTERNALC eNodeB
The
cell MNC
123,identity
MNC identity
consists
=is45, PLMN of
EUTRANEXTERNALC
EUTRANEXTERNALC
EUTRANEXTERNALC YES
LTE ELL (represented
two to
comprised
= 12345. three of by
digits.
the thecell
ELLBAND
ELL
ELL
ADD
LST most significant
For example,
identity (representedMCC 20 =
BTS3900, BTS3900 MOD
RMV
RMV
EUTRANEXTERNALC
EUTRANEXTERNALC bits).
123,
by The
theMNC cell global
least= significant
45, PLMN YES
LTE EUTRANEXTERNALC
EUTRANEXTERNALC
EUTRANEXTERNALC
ELL
ELLBAND identity
Indicates
= 12345.
eight bits)(CGI)
the
and ofthe
DL an E-
ELL
ELL
ELLBAND
ADD Indicates the uplink E-
MOD
MOD UTRAN
EARFCN
eNodeB cell
of is
the
identity.radio The
BTS3900, BTS3900 RMV
RMV
EUTRANEXTERNALC UTRA
Indicates absolute
whether to
EUTRANEXTERNALC
EUTRANEXTERNALC comprised
external
cell global of the E-
E-UTRAN
identity NO
LTE EUTRANEXTERNALC
EUTRANEXTERNALC
ELL frequency
configure channel
the uplink
ELL
ELL
ELL
UTRAN
cell.
(CGI) Forof cell identity
details,
an E-UTRAN see E-
ELLBAND
ADD
MOD
LST number
UTRA
and
3GPP the (EARFCN)
absolute
TS 36.104.ofFor
PLMN radio
ID. of
BTS3900, BTS3900 RMV
RMV
EUTRANEXTERNALC cell
the is comprised
external E-UTRAN the
EUTRANEXTERNALC
EUTRANEXTERNALC
EUTRANEXTERNALC frequency
details,
E-UTRAN seechannel
3GPP
cell identityTS NO
LTE EUTRANEXTERNALC
ELL cell. If the value of this
ELL
ELL
ELL number
36.413.
and (EARFCN)
the PLMN ID. For for
ELLBAND
ADD
MOD
LST parameter
Indicates
the external theisE-UTRAN
not
tracking
BTS3900, BTS3900 RMV
EUTRANEXTERNALC details, see 3GPP TS
EUTRANEXTERNALC
EUTRANEXTERNALC specified,
area
cell. code the (TAC) default of the NO
LTE EUTRANEXTERNALC
ELL 36.413.
Indicates the physical
ELL uplink
external EARFCN
E-UTRAN is
ELLBAND
ADD
MOD cell
BTS3900, BTS3900 LST cell.ID
used, Two of the
which TAC isexternal
values
EUTRANEXTERNALC E-UTRAN
calculated cell.
LTE EUTRANEXTERNALC 0x0000(0) and Foron
based NO
ELL
ELL details, see 3GPP
ELL
ADD the downlink
0xFFFE(65534) areTS
EARFCN.
MOD
LST 36.331.
For detailsaccording
about this
BTS3900, BTS3900 EUTRANEXTERNALC reserved to
EUTRANEXTERNALC
EUTRANEXTERNALC parameter, NO
LTE ELL the protocolsee and3GPP will
ELL
ELL TS
ADD
MOD not 36.104.
be used
Indicates theinname futureof
BTS3900, BTS3900 LST
EUTRANEXTERNALC
EUTRANEXTERNALC versions.
the external Therefore,
E-UTRAN NO
ADD
EUTRANEXTERNALC Indicates
LTE ELLBAND
ELL
EUTRANNFREQRAN do not usethe
cell. 0 or 65534
ELL frequency band in in TAC
LST
LST
SHARE as a TAC value
BTS3900, BTS3900 which the
planning or
Indicates cell
the mobile
EUTRANEXTERNALC
ADD
EUTRANEXTERNALC
LST YES
LTE operates.
configuration.
country codeFor (MCC)
details of
ELLBAND
EUTRANNFREQRAN
ELL
EUTRANNFREQRAN Indicates the ID of the
about
the this
operator parameter,
that
BTS3900, BTS3900 RMV
SHARE
SHARE local cell. the
It uniquely
ADD see
shares 3GPP
Indicates thea TS DL 36.104.
mobile
neighboring YES
LTE EUTRANEXTERNALC
LST
MOD identifies cell within of
EUTRANNFREQRAN
ELLBAND EARFCN
network code
E-UTRAN of the (MNC)
frequency.
EUTRANNFREQRAN
EUTRANNFREQRAN an eNodeB.
SHARE operator
the operator
A public thatthat
land shares
mobile
BTS3900, BTS3900 SHARE
SHARE
ADD
LST the
network (PLMN)E-
neighboring
shares the neighboring ID is YES
LTE MOD
RMV
EUTRANNFREQRAN
EUTRANNFREQRAN UTRAN
E-UTRAN
comprised frequency.
frequency.
of an MCC For
EUTRANNFREQRAN
EUTRANNFREQRAN
BTS3900, BTS3900 SHARE
SHARE details,
A
andpublic see
landthe
a mobile 3GPP
mobile
network
SHARE
SHARE YES
LTE LST
MOD TS
code 36.104.
network (MNC).(PLMN) ID is
RMV
EUTRANNFREQRAN
EUTRANNFREQRAN
EUTRANNFREQRAN comprised
The MCC consists of a mobile of
BTS3900, BTS3900 SHARE
SHARE
SHARE network
three digits. (MCC)
code
YES
LTE MOD
RMV and
The an MNC MNC. consists of
EUTRANNFREQRAN
EUTRANNFREQRAN The
two to MCC three consists
digits. of
SHARE
SHARE three digits. if the
For example,
RMV The
MCCMNC is 123 consists
and theof
EUTRANNFREQRAN two to three
MNC is 45, the digits. PLMN
SHARE For
ID is 12345. if the
example,
MCC is 123 and the
MNC is 45, the PLMN
configuration is
specified, the cell
reselection priority
ADD specified in
Indicates thethe DLSPID
EUTRANNFREQRAN configuration
UARFCN of the is used.
SHARE If no related cell
neighboring SPID
ADD
MOD configuration
operating
Indicates whether on the is to
BTS3900, BTS3900 EUTRANNFREQRAN specified but
EUTRANNFREQRAN UTRAN
configurefrequency.the this cell NO
LTE SHARE Indicates
parameter
The UARFCN the cell
ispriority.
set,range the in
SHARE reselection
MOD
LST
ADD reselection
eNodeB
each FDD prioritythe
delivers
frequency of
BTS3900, BTS3900 Indicates the mobile
EUTRANNFREQRAN
EUTRANNFREQRAN
GERANRANSHARE the
cell
band operator
reselection
is shown that as NO
LTE country
Indicates
shares code
the the (MCC) of
cell
neighboring
SHARE
SHARE
LST priorities
follows:
the operator of allthat PLMNs
LST
ADD identity
GERAN
supported
Band
Indicates 1: ofcarrier
the
theby a local
UE by
mobile
BTS3900, BTS3900 GERANRANSHARE shares thegroup.
neighboring
EUTRANNFREQRAN
GERANRANSHARE cell.
Normal It the
frequency
using
Indicates
network uniquely
IE
UARFCNs:
the
code index
(MNC) The ofof YES
LTE MOD GERAN carrier
SHARE
LST identifies
value 0 a
idleModeMobilityContr
[10562-10838]
the GERAN
operator cell
indicatescarrier
that within
the
GERANRANSHARE frequency group.
BTS3900, BTS3900 ADD
GERANRANSHARE an eNodeB.
lowest
olInfo
Special
frequency
shares inpriority.
an
UARFCNs:
the RRC
group. If the
neighboring It
RMV A public land mobile YES
LTE GERANRANSHARE
MOD
GERANRANSHARE related
Connection
none
uniquely
GERAN SPID Release
carrier IDais
identifies
network
configuration (PLMN) is UE. If
LST message
Band 2: carrier
togroup.
GERANRANSHARE
ADD
GERAN
frequency
comprised
specified, ofthe
set an
thisMCC
BTS3900, BTS3900 GERANRANSHARE
RMV no
Normal
related
frequency
A public UARFCNs:
land SPID
group. mobile
GERANRANSHARE and a
priority mobile
to(PLMN)
the is network
oneID is YES
LTE MOD
GERANRANSHARE configuration
[9662-9938]
network
LST code (MNC). in the SPID
GERANRANSHARE specified
Special
comprised UARFCNs:
andof athis mobile
BTS3900, BTS3900 GERANRANSHARE The MCC consists
configuration. If no of
RMV parameter
(412,
Indicates
country 437, 462,
is
whether
code (MCC) not 487,
set,
to a YES
LTE ADD
MOD three
related digits.
SPID
GERANRANSHARE UE
512, uses
configure
and an537, the
MNC. 562,
the cell
cell587,of
GERANRANSHARE
GERANRANSHARE The MNC
configuration consistsis687)of
612,
The
two 637,
reselection
MCC
to three 662,priority
consists of
BTS3900, BTS3900 MOD
RMV specified
the
Band
three neighboring
3:
operator
digits. butdigits.
thisE-
that NO
LTE ADD
GERANRANSHARE
GERANRANSHARE For example, if the
parameter
UTRAN
Normal
shares
The MNC is
UARFCNs:
frequency,
the set,
neighboring
consists theof
GERANRANSHARE
LST MCC is 123 and the
ADD UTRANNCELL eNodeB
which
Indicates
[1162-1513]
GERAN
two is
toisthree delivers
broadcast
the
carrier mobile
digits. the in
BTS3900, BTS3900 MOD
GERANRANSHARE MNC 45, then the
DSP UTRANRIMINFO cell
the reselection
country
Special
system
frequency
For example, UARFCNs:
code group. of
if the
the NO
LTE GERANRANSHARE PLMN IDof is all12345.
DSP priorities
information.
neighboring
none
Indicates
MCC is 123 the UTRAN
and PLMNs
cell ID of
the
LST Indicates the mobile
BTS3900, BTS3900 ADD UTRANNCELL
UTRANRIMLOADINF supported
cell.
Band
the
MNC local4:
is by
cell.
45, then a
It UEthe by
GERANRANSHARE Indicates
network the
code RNC
of the IDof YES
LTE LST
O UTRANNCELL using
The
Normal
uniquely
PLMN the
PLMN IE
UARFCNs:
consists
IDidentifies
is 12345.a
of the
neighboringneighboring
MOD UTRANNCELL
LST UTRANNCELL Indicates
the
[1537-1738]
cell
UTRAN
MCC
within anUTRAN
idleModeMobilityContr
the
and
cell.
RNC
the cell
eNodeB.
The 28-bit
BTS3900, BTS3900 ADD
MOD UTRANNCELL
RMV UTRANNCELL
UTRANNCELL cell.
olInfo
ID
MNC. in an
of an UARFCNs:
Special RRC
external
LST UTRAN cell ID is YES
LTE RMVUTRANNCELL
DSP UTRANRIMINFO
UTRANNCELL The
The MCC
(1887, PLMN
Connection
UTRAN
comprised
cell.
1912, consists
It
consists1937,ofof
Release
MOD
DSP UTRANNCELL the MCC
message
uniquely
three
1962, digits.
1987, toofthe
and
identifies the
2012,theUE. RNC
a If
BTS3900, BTS3900 ADD
RMV UTRANNCELL
UTRANNCELL
UTRANRIMLOADINF cell
MNC. ID
no related
cell
The
2037, within
MNC and
2062, the
SPID
an
consistsRNC.ofID
2087) RNC
LST UTRANNCELL that are represented YES
LTE DSP
O UTRANRIMINFO The
two
Band MCC
configuration
28-bit
to 5:three consists
UTRAN is
digits. of
cell
MOD
DSP UTRANNCELL by
three
ID the
specified
Forisexample,
Normal least
digits.
comprisedand
UARFCNs: significant
this
MCC of the =
BTS3900, BTS3900 ADD
RMV UTRANNCELL
UTRANNCELL
UTRANRIMLOADINF 16
The bits
MNC
parameter
Indicates and isthe notmost
consists
whether set,of a
the
RNC
123, cell
[4357-4458]
MNC ID = and
45, the
PLMN YES
LTE LST
DSP
O UTRANNCELL
UTRANRIMINFO significant
two
UE toIDthree
neighboring
uses the 12digits.
UTRANbits,
cell
RNC
=
Special
12345. that
UARFCNs: are
MOD
DSP UTRANNCELL respectively.
For example,
reselection
cell is manually The
MCC
priority =
represented
(1007, 1012, by 1032,the of
BTS3900, BTS3900 RMV UTRANNCELL
UTRANRIMLOADINF formula
123, MNC foras =calculating
45, PLMN
the
identified
least
1037, neighboring
Indicates significant
1062, a
1087)
whether 16 bits YES
LTE DSP
O UTRANRIMINFO the
=
and UTRAN
12345.
GERAN
neighboring
Band the carrier
6: most cell
cellof IDto is
DSP allow
as handover
follows: UTRAN UEscell
ADD UTRANNCELL frequency
overlapping
significant
Normal group,
12 the
UARFCNs:cell bits,E-
BTS3900, BTS3900 UTRANRIMLOADINF to
ID the
= RNC neighboring
ID The x 65536 +
MOD UTRANNCELL which
UTRAN is
respectively.
[4387-4413] broadcast
cell. in NO
LTE O UTRANNCELL that iscell
Indicates
RNC determined
whether
ID. For by
to
LST the system
default
formula
Special value is NO.
for calculating
UARFCNs:
ADD UTRANNCELL the
permitneighboring
details, orseeprohibit
3GPP
BTS3900, BTS3900 information.
The
the
(1037, parameter
UTRAN
relation. 1062) cell ID TS
value is
MOD UTRANNCELL removal
25.401.
YES of
indicates the NO
LTE as follows:
Band 7: UTRAN the that cell
LST UTRANNCELL neighboring
neighboring
ID = RNC
Normal IDUTRAN
UARFCNs: xcell65536 +
ADD UTRANNCELL
ADD Indicates
relationship the by ANR.
BTS3900, BTS3900 cell
RNC iscell
[2237-2563]
reselectionmanually
ID.priority
For of
MOD UTRANNCELL
UTRANRANSHARE Indicates the mobile NO
LTE identified
details,
Special
Indicates
the operator seeas3GPP
UARFCNs:
the athat
cell TS
LST
LST UTRANNCELL country code (MCC)
ADD
neighboring
25.401.
(2587,
shares 2612,
identity of
the the cell local of
2637,
neighboring
BTS3900, BTS3900 UTRANRANSHARE the neighboring
overlapping
2662, the E-
UTRANRANSHARE cell.
UTRAN It 2687,
Indicates uniquely 2712,
frequency.
the mobile YES
LTE MOD UTRAN
2737, 2762,cell. The
2787,
LST identifies
The
network value a0cell
code indicateswithin of
(MNC)
UTRANRANSHARE A public
parameter
2812, 2837,land value mobile
2862, NO
BTS3900, BTS3900 ADD
UTRANRANSHARE an
the
the eNodeB.
lowest
neighboring priority. If
RMV network
indicates
2887, 2912)(PLMN)
that the ID is YES
LTE UTRANRANSHARE
MOD
UTRANRANSHARE the
UTRAN related cell. SPID
comprised
neighboring
Band 8:
configuration of an
UTRAN
is MCC
LST
UTRANRANSHARE A public land mobile
ADD and
cell
Normal a not
is
specified, mobile set network
manually
UARFCNs: this
BTS3900, BTS3900 UTRANRANSHARE
RMV network (PLMN)
LTE UTRANRANSHARE
MOD
code
identified(MNC).
[2937-3088]
priority to as
the aoneID is YES
UTRANRANSHARE comprised
The MCC ofcell a mobile
LST
UTRANRANSHARE neighboring
Special
specified
country inconsists
UARFCNs:
code the (MCC)SPID of
BTS3900, BTS3900 UTRANRANSHARE three
none digits.
overlapping
configuration. the E-
If no
RMV and an MNC. YES
LTE ADD
MOD The
UTRAN MNC
Indicates
Band
related 9:SPID consiststo
cell.
whether of
UTRANRANSHARE The MCC consists
UTRANRANSHARE
UTRANRANSHARE two to
configure three
Normal UARFCNs:
configuration the is cell of
digits.
BTS3900, BTS3900 MOD three
For digits.
example,
reselection
[9237-9387] if the of
priority
RMV specified but this NO
ADD The
MCC MNC
is 123 consists
and of
LTE UTRANRANSHARE
UTRANRANSHARE the operator
Special
parameter
two to
UARFCNs:
three set,the
that
isdigits. the
UTRANRANSHARE
LST MNC
shares
none isthe45, then the
neighboring
eNodeB
For example, delivers ifrange
thethe
BTS3900, BTS3900 MOD
UTRANRANSHARE PLMN
UTRAN
The ID
UARFCN is 12345.
frequency. in
cell
MCC reselection
is 123frequency
and the NO
LTE UTRANRANSHARE each TDD
priorities
MNC of
is shown all
45, thenasthe PLMNs
LST band is
supported
PLMN ID isby12345.a UE by
UTRANRANSHARE follows:
using the IE
Band 1:
idleModeMobilityContr
Normal
olInfo inUARFCNs:
an RRC
[9500-9600]Release
Connection and
[10050-10125]
message to the UE. If
Special UARFCNs:
Special
Special
Special UARFCNs:
UARFCNs:
UARFCNs:
the
UARFCN
Special
(782, neighboring
787, is807,
UARFCNs: calculated 812,
(412,437,462,487,512,
(1037,
UTRAN 1062)
frequency.
as
none
837, follows
862) if the DL
537,562,587,612,637,
Band
The 7:
value 0
frequency
Band
Band 2:
6: UARFCNs:is indicates
a normal
662,687)
Normal
the lowest priority.
one:
Normal
Normal Band UARFCNs: 1: UL The
Band
[2237-2563]
UE 3: UARFCNs:
decides whether to
UARFCN
[9262-9538]
[4162-4188] = DL
Normal
Special
reselect UARFCNs:
UARFCNs:
a neighboring
UARFCN
Special
Special -
UARFCNs:
UARFCNs: 950; Band
ADD UTRANNFREQ [1162-1513]
(2587,
Indicates 2612,the 2637,
cell112,
cell
2:
(12,UL
(812, on
37, the
UARFCN
837) 62, UTRAN
87, = ID DLof
BTS3900, BTS3900 LST UTRANNFREQ Special
2662,
the local
frequency UARFCNs:
2687, cell.
based 2712,
It on
UARFCN
137,
Band 162,
7: - 400;
187, 212, Band YES
LTE MOD UTRANNFREQ none
2737,
uniquely
the value 2762, identifies
of 2787,
this a
3:
237,UL
Normal UARFCN
262, 287)
UARFCNs: = DL
ADD
RMV UTRANNFREQ
UTRANNFREQ Band
2812,
cell 4:
2837,
within
parameter an and 2862,
eNodeB.
the
UARFCN
Band
[2012-2338] 3: - 475; Band
BTS3900, BTS3900 LST UTRANNFREQ Normal
2887,
Indicates
absolute UARFCNs:
2912) whether
priority tothe
4: UL UARFCN
Normal
Special UARFCNs:
UARFCNs: =ofDL YES
LTE MOD UTRANNFREQ [1537-1738]
Band
set
servingthe 8: UL
cell. UARFCN
UARFCN
[937-1288]
(2362, 2387, - 2000;2412, Band
RMV UTRANNFREQ Special
Normal
for
If thethevalue UARFCNs:
external of2487, this
ADD UTRANNFREQ 5: UL
Special
2437, UARFCN
UARFCNs:
2462, = DL
BTS3900, BTS3900 (1887,
UTRAN1912,
[2937-3088] cell. 1937,
Iflarger
the
MOD UTRANNFREQ parameter
UARFCN
none
2512, 2537, - is225;
2562, Band NO
LTE 1962,
Special
value
than 1987,
of
the UARFCNs:
this
absolute 2012,
parameter
LST
ADDUTRANNFREQ 6:
BandUL
2587, UARFCN
4:
2612, 2087) 2637,DL =
ADD UTRANNFREQ 2037,
none
is 2062,
not specified,
priority the
BTS3900, BTS3900 UTRANEXTERNALCE UARFCN
Normal
2662,
Band
Band 2687) serving
5:
9:
of the
-
UARFCNs: 225; Band
MOD
LL UTRANNFREQ default
cell,
7: UL the
[1312-1513] DLUE
UARFCN UARFCN
starts = DL is NO
LTE Band
Normal
Indicates
Normal 8: UARFCNs:
whether
UARFCNs: to
LST
ADD
ADD UTRANNFREQ used.
measurements
UARFCN
Special For -an
UARFCNs: 600;UTRAN on Band
ADD UTRANNFREQ Normal
[4357-4458]
set the UARFCNs:
priority of a
BTS3900, BTS3900 UTRANEXTERNALCE
UTRANEXTERNALCE
[9237-9387]
FDD ULcell,
neighboring
8:
(1662,
Indicates UARFCN
1687, thecells
the way
1712,
mobile = on tocell
DL
MOD UTRANNFREQ [2712-2863]
Special
assigned
Special UARFCNs:
with
UARFCNs: the NO
LTE LL
LLBAND calculate
the
UARFCN
1737,
countryUTRAN 1762,
codethe
- 225; default
frequency;
1787,
of in Band
the
LST UTRANNFREQ Special
(1007,
UARFCN
none UARFCNs:
1012, used 1032, cell
ADD
ADD
LST UL
then
9: UL
1812, UARFCN
external if the
UARFCN
1837,
UTRAN signal varies
1862) = DL
cell.
ADD UTRANNFREQ none
1037,
reselection
The 1062,
UARFCN to 1087)UTRAN.
range in
BTS3900, BTS3900 UTRANEXTERNALCE
UTRANEXTERNALCE
UTRANEXTERNALCE depending
quality
UARFCN
Indicates
Band
The 5:
PLMN of some
-
the on
475; whether
mobile
consists The of
MOD UTRANNFREQ Band
Indicates
Band
each 9: the
6:frequency
TDD frequency RNCisIDa NO
LTE LL
LLBAND
LL the
default
network
Normal
the DL
neighboring
MCC ULcode
UARFCNs:
and cells
UARFCN of
the the is
LST
ADD UTRANNFREQ Normal
of
bandthe
Normal
Indicates UARFCNs:
isexternal
UARFCNs:
shown
the RNC UTRAN
ascell. cellif
ADD
LST
LST normal
meets
calculated
external
[4132-4233]
MNC. or
theUTRANspecial
related
as follows one.
BTS3900, BTS3900 UTRANEXTERNALCE [8762-8912]
cell.
follows:
ID ofDLThe
[4387-4413] 28-bit
anfrequency
external UTRAN
UTRANEXTERNALCE
UTRANEXTERNALCE
UTRANEXTERNALCE The
the
The
Special
The default
conditions,
PLMN
MCC UARFCNs: UL UE
the
consists
consists isofaof YES
LTE LL Special
cell
Special
Band
UTRAN ID 1:isUARFCNs:
comprised
UARFCNs:
cell. Itthe of
LLBAND
LL
LLBAND UARFCN
starts
special
the
(782,
three MCC cell
787,one:
digits. is
and 807,calculated
reselection.
Band 812, 2:
ADD none
the
(1037,
Normal RNC
Indicates
uniquely cell
1062)the
UARFCNs:
identifies ID and
operating a
LST
LST
MOD as
If
UL
MNC.
837,
The follows
the value
UARFCN
862)
MNC ifof the
consists =thisDLDL
BTS3900, BTS3900 UTRANEXTERNALCE the
Band
mode UARFCN
RNC
[9500-9600]
cell 7:
of
within
frequency ID
baseband
an
is that
and
a
range
RNC.
normalareofin
UTRANEXTERNALCE
UTRANEXTERNALCE parameter
UARFCN
The MCC - is400;
consists smaller Band
LTE UTRANEXTERNALCE
LLBAND
LL
Band
two
each to
represented
Normal
processing 6:
TDD
[10050-10125]
The
one:
than
three
28-bit
the UARFCNs: digits.
frequency
by the
units
UTRAN
absolute forof
cell
YES
LLBAND
LL 4:
For
bandUL
three
Normal
least UARFCN
digits.
example,UARFCNs:
is shown
significant MCCas =
16 DL =
bits
LST
LST [2237-2563]
LTE
Special
ID
Band is
priority FDD
comprised
1: UL
ofmostin
UARFCNs:
the the
UARFCNservingof the
BTS3900, BTS3900 MOD
RMV UARFCN
The
123,
follows:
and MNC
[4162-4188]
MNC
the -consists
= 300;
45, Band
PLMN of
UTRANEXTERNALCE
UTRANEXTERNALCE Special
eNodeB.
none
RNC
= DL
cell, cell UARFCNs:
UARFCN
the UE ID startsand -=the
950;
the YES
LTE UTRANEXTERNALCE
UTRANEXTERNALCE 5:
two
= UL
Special to
12345.
Band
significant UARFCN
1:three
UARFCNs:
12 digits.
bits, DL
LL
LLBAND (2587,
If
RNCthis
Band parameter
ID
measurements2: 2612,
that
UL 2637,
are
UARFCN only is set
LL
LL UARFCN
For
(812,
Normal example,
837)
respectively. -
UARFCNs: 225;The MCC = Band
ADD
LST
MOD 2662,
to
= NORMAL,
Normal
represented
DL
when 2687,
UARFCNs:
UARFCN
the signal 2712,
by cell -the400;
BTS3900, BTS3900 RMV
RMV 6:
123,
BandULMNC
[9500-9600]
formula UARFCN
7: for = 45,
and
calculating =quality
DL
PLMN
UTRANEXTERNALCE
UTRANEXTERNALCE
UTRANEXTERNALCE 2737,
capacities,
[9250-9550]
least
Band
of the 2762,
significant
3: UL
serving the2787,
and
UARFCN number
cell 16 bits
isis YES
LTE UTRANEXTERNALCE
UTRANEXTERNALCE UARFCN
= 12345.
Normal
[10050-10125]
the UTRAN -
UARFCNs: 225;
cell Band
ID
LL
LLBAND
LL 2812,
of
= cells,
[9650-9950]
andDL
poor; the 2837,
UARFCN
then and
most 2862,
supported
ifUTRAN -
the =signal 475;
LL
LLBAND
ADD 7: UL
[2012-2338]
Special
as UARFCN
follows: UARFCNs: DL
MOD
MOD
RMV 2887,
features
Special
significant
Band
quality 2912)
4: insome
UARFCNs:
ofUL 12 the
UARFCN cells cell
bits,
BTS3900, BTS3900 RMV
UTRANEXTERNALCE UARFCN
Special
none
ID = RNC -
UARFCNs: 225; For a+
UTRANEXTERNALCE
UTRANEXTERNALCE
UTRANEXTERNALCE Band
established
none 8: IDon
respectively.
= DL
neighboringUARFCN x 65536
The
cells - 2000; NO
LTE UTRANEXTERNALCE
LL TDD
(2362,
Band
RNC cell UTRAN
2: 2387,ID. cell,
2412,
For the
LL
LL
LL Normal
baseband
Band
formula
meets 3:
5: UARFCNs:
for
theUL processing
calculating
UARFCN
related
LLBAND
ADD
MOD UL
2437,
NormalUARFCN
details, 2462,
UARFCNs:
see is theTS
2487,
3GPP
BTS3900, BTS3900 LST
RMV
RMV [2937-3088]
units
Normal
the
= remain
UTRAN
DL UARFCN
conditions, UARFCNs: cell
the -ID
UE 225; is
UTRANEXTERNALCE
UTRANEXTERNALCE same
2512,
[9250-9550]
25.401. as
2537, the DL
2562,
and NO
LTE UTRANEXTERNALCE
UTRANEXTERNALCE
UTRANEXTERNALCE Special
unchanged.
[9550-9650]
as
Band follows:
starts 6: UARFCNs:
cellUL The
UTRAN
UARFCN
reselection. cell
LL
LL UARFCN.
2587,
[9650-9950] 2612, For 2637, details,
LL
LL none
parameter
Special
ID = RNC UARFCNs:
ID value
LLBAND
ADD
MOD
LST
= DL
Frequencies
see
2662,
Special
UARFCN
3GPP 2687)
UARFCNs: TS 25.104 +
x
used 65536
- 225;for
BTS3900, BTS3900 RMV
UTRANEXTERNALCE Band
LBBP_LARGE_CAPA
none
RNC
Band
different 9:
cell
7: UL ID.
RATs For
UARFCN must be
UTRANEXTERNALCE
UTRANEXTERNALCE and
Band
none 25.105.
8: UARFCNs: NO
LTE UTRANEXTERNALCE
LL Normal
CITY
Band
details,
= DL
assigned applies
4: see
UARFCN 3GPP
different only - 600; to
TS
cell
LL
LL Normal
Band
[9237-9387]
LBBPd3 3: UARFCNs:
boards.
LLBAND
ADD
MOD
LST Normal
25.401.
Band 8: UL
reselection
Indicates
[2712-2863] UARFCNs:
the UARFCN
priorities.
duplex
BTS3900, BTS3900 Normal
Special
Compared UARFCNs:
UARFCNs: with
UTRANEXTERNALCE
UTRANEXTERNALCE
UTRANEXTERNALCE
[12850-13100]
=
ForDLdetails,
mode
Special UARFCN
of the
UARFCNs: see
UTRAN -the225;
3GPP NO
LTE LL [9550-9650]
none
parameter
Special
Indicates UARFCNs:
the value primary
LL Band
TS
cell.
none 9:
36.331. UL UARFCN
Special
The UARFCN UARFCNs: range
ADD
MOD
LST NORMAL,
(2112,
DL
= DL
Band scrambles2137,
UARFCN
9:
the2162, of the in
- 475;
BTS3900, BTS3900 UTRANEXTERNALCE none
each
parameter
2187, TDD
2212, frequency
value2237,
UTRANEXTERNALCE external
The
Indicates
Normal default UTRAN
theUL
UARFCNs: operating cell. NO
LTE LL Band
band 4:
is
LBBP_LARGE_CAPA
2262, shown
2287, 2312, as
LL
LL For
UARFCN
mode details,
[8762-8912] of is see
single calculated 3GPP
ADD
MOD
LST Normal
follows:
CITY
Indicates
2337)
TS 25.331. UARFCNs:
enables the anDLof
LAC
BTS3900, BTS3900 as
frequency
follows
Special ifnetwork
UARFCNs: the
UTRANEXTERNALCE
UTRANEXTERNALCE
UTRANEXTERNALCE [12850-13100]
Band
LBBPd3
the
Band 1:
external
5: to support
UTRAN NO
LTE frequency
(SFN)
none cells. is Thisa special
LL
LL
LL Special
Normal
more
cell.
Normal 2T4R UARFCNs:
UARFCNs:
UARFCNs: cells with a
ADD one:
eNodeB-level
The UARFCN range in
MOD (2112,
Indicates 2137,the 2162,
name
BTS3900, BTS3900 LST
UTRANEXTERNALCE
[9500-9600]
bandwidth
[11500-12000]
Band
parameter
each 2: UL
TDD
and
ofUARFCN
applies
frequency
20 MHz toof
UTRANEXTERNALCE 2187,
the 2212,
external
[10050-10125]
per 2237,
UTRAN NO
LTE UTRANEXTERNALCE
LLBAND = DLcell
Special
Indicates
LTE
band FDD
UARFCNbut
UARFCNs:
is2287, the
showneNodeBs fewer - 400;
as
LL
LL 2262,
cell.
Special
features
none
frequency UARFCNs:
for band 2312,
the cells.
in
LST Band
equipped
follows: 4: UL with UARFCN LBBPd
BTS3900, BTS3900 LST 2337)
none
Before
Band
which 6: setting
the cell this
UTRANEXTERNALCE =
or DL
Band UBBPd UARFCN
1: boards. - 300; YES
LTE UTRANEXTERNALCE Band
Band
parameter
Normal
operates. 5:
2: UARFCNs:
For toUARFCN details
LLBAND Band
If this
Normal 5:
parameter
UL
UARFCNs: is set
LL Normal
Normal
LBBP_LARGE_CAPA
[9400-9600]
about UARFCNs:
UARFCNs:
this parameter,
RMV =
to DL
NORMAL,
[9500-9600]UARFCN and an - SFN
225;
BTS3900, BTS3900 MOD FDDRESMODE [11500-12000]
[9250-9550]
CITY,
Special
see 3GPP disable
UARFCNs: TS and the
36.104.
UTRANEXTERNALCE Band
cell with6:
[10050-10125] UL
a bandwidthUARFCN NO
LTE LST FDDRESMODE Special
[9650-9950]
following
none UARFCNs:
features:
LLBAND =
of DL
10
Special UARFCN
MHz UARFCNs: supports - 225;a
none
Special
ultra-high
For details,UARFCNs:
speed see 3GPP
Band
maximum
none 7: UL of UARFCN
400 UEs,
BTS3900, BTS3900 MOD FDDRESMODE Band
none
mobility,
TS 25.1046: extended and 3GPP CP,
=
andDL
Indicates
Band anUARFCN
2: SFN the cell -
priority with
225; a NO
LTE LST
ADDFDDRESMODE
PCCFREQCFG Normal
Band
intra-subframe
Indicates
TS 3:
25.105. UARFCNs:
the downlink
For
bandwidth
with
Normal a TDD
which UARFCNs: of
UTRAN
the 5 MHz
[9400-9600]
Normal
frequency
BTS3900, BTS3900
DSP PCCSCELLLIST cell, the UARFCNs:
E-UTRA
supports
candidate
[9250-9550] UL hopping,
absolute
aPCC maximum
UARFCN
andis and
UL
radio
LST PCCFREQCFG Special
[9550-9650]
CoMP,
frequency UARFCNs:
MU-MIMO,
channel YES
LTE is
of the
200
selected
[9650-9950] same
UEs. as
as the PCC. the DL
MOD PCCFREQCFG none
Special
PUCCH-based
number UARFCNs:
(EARFCN) uplink ofa
UARFCN.
If
Thethispriority
Special parameter For
UARFCNs: level details,
is
has set
ADD
RMV PCCFREQCFG
PCCFREQCFG For candidate
none
timing.
the details,
All cells see PCC. 3GPP
BTS3900, BTS3900 see
to
positive
none 3GPP TS
correlation 25.104
MOD PCCFREQCFG TS
Band 25.104
established 4: parameter andon25.105. 3GPP
the NO
LTE and
LARGECAPABILITY,
with
Band 3GPP
the3: TS
LST PCCFREQCFG TS
Normal
LBBPd325.105. UARFCNs:
areparameter
an
value.
NormalSFNThis cell
UARFCNs: with a
[12850-13100]
reactivated
bandwidth
takes effect only of after 10 MHz this
when
[9550-9650]
Special
parameter UARFCNs: is set to
supports
PccAnchorSwitch
Special a maximum
UARFCNs: of
(2112,
LBBP_LARGE_CAPA
of
the 1200 2137,
UEs,
CaAlgoSwitch 2162,
and an
none
2187,
CITY. 2212,
If UL
SFN
parameter
Band cell
4: with isCoMP,
2237,
on. a
2262,
MU-MIMO,
bandwidth 2287, of2312,
and 5 MHz
Normal
2337)
PUCCH-based UARFCNs: uplink
supports
[12850-13100] a maximum
reading
switch
handovers isfor turnedintra-off,
to and
to construct and
inter-RAT
inter-PLMN
CDMA2000 event-
handovers
optimize inter-RAT are HRPD
triggered
are disabled.
enabled. ANR
If this and switch
neighbor relationships
proactive
UtranFlashCsfbSwitch:
is turned PCI
off, non- conflict
with CDMA2000 cells
detection.
This
optimized switchhandoversIf takes
this
by performing periodic
parameter
effect
to CDMA2000 only is when set HRPD to
inter-RAT
Indicates the downlink
CA_UE_CAP(CA
UtranCsfbSwitch UE
ADD SCCFREQCFG Indicates
are disabled.
measurements
E-UTRA
the
absolute onisradio
policy
BTS3900, BTS3900 LST SCCFREQCFG Capability),
turned
based on.
on which
CdmaHrpdOptimisedH If the intra-
CDMA2000
frequency networks.
channel YES
LTE MOD SCCFREQCFG eNodeB
UtranFlashCsfbSwitch
RAT event-triggered
oSwitch: does
If this not
switch
UtranAutoNrtDeleteSw
number
Indicates (EARFCN)
the priority of
ADD
RMV SCCFREQCFG select
is turned the CA UEs to
SCCFREQCFG ANR
is
itch:turned
Indicates
the
with PCC.which thison,
Ifadds on,
theswitch
the
flash
a neighbor
optimized
downlink is
BTS3900, BTS3900 LST SCCFREQCFG perform
CSFB to CGI reading
relationship
handovers
turned
EARFCN
candidate on,UTRAN
of toto
SCC thean
is
works
NRT. YES
LTE MOD SCCFREQCFG when
enabled
If this
CDMA2000 theand
parameter carrier the
HRPD is set
are
UtranEventAnrSwitch
candidate
as an SCC SCC.
for that
RMV SCCFREQCFG
ADD SCCFREQCFG aggregation
eNodeB
to BASED_NCL,
enabled. sends
If band
this system
intra-
switch
BTS3900, BTS3900 is
PCC. turned A smalleron, Novalue
MOD SCCFREQCFG combinations
information
RAT
is turned event-triggered ofoptimized
off,flag NO
LTE Remove
of this (a
parameter in the
LST SCCFREQCFG supported
candidate
ANR can
handovers torelation by
target
add the
a
neighboring
indicates a lower
eNodeB
UTRAN
neighbor involve
cells to UEs theare
BTS3900, BTS3900 MOD ANR CDMA2000
table)
priority, ofand arelationship
HRPD
neighboring
a larger
frequency
during
to an
disabled. NRT bands
redirection.
based of
on If NO
LTE LST ANR UTRAN
value cell is set
indicates a to
which such
UtranFlashCsfbSwitch
the NCL.
GeranNaccSwitch: CA UEs
False,
higher and
priority.
support
is turned
If this
Indicates
This switch aggregation.
parameteroff,
thedoes flash
ID of is
not set
the If
BTS3900, BTS3900 MOD ANR Optimization Mode is
this
CSFB
to
take parameter
to
NOT_BASED_NCL,
baseband UTRAN
equipment is set
is to NO
LTE LST ANR set toeffectFREE, if
CA_UE_CARRIER_N
disabled.
intra-RAT
used
GeranCcoSwitchby the event-clustering isof
automatic removal
UM(CA
GeranFlashCsfbSwitch
triggered UE Carrier
BTS3900, BTS3900 MOD EUCOSCHCFG the inter-RAT adds
node.
disabled. If thisANR
If parameter
this switch a
NO
LTE LST EUCOSCHCFG :Number),
isThis
neighbor
set
turned switch
to 255, thetakes
relationship
on, eNodeB
no
the
neighboring
Indicates the relation
identity
ADD CAGROUP selects
effect
to an
baseband
GERAN only
NRT CA UEs
when
based
equipment
supports toon of
with
the CA UTRAN group. cells
It is
BTS3900, BTS3900 LST CAGROUP perform
GeranCsfbSwitch
the
is CGI
specified
network CGI
reported
assisted for reading
the is
from
cell
allowed.
uniquely If
identifies a YES
LTE MOD CAGROUP based
turned
the UE
clustering
change on
on.
but theIf
not
node.
(NACC). number
basedIf this
UtranAutoNrtDeleteSw
CA group within an
RMV CAGROUP
ADD CAGROUP of serving
GeranFlashCsfbSwitch
on the
switch
Indicates NCL.
is carriers
turned
the off, type of
off,ofthe
BTS3900, BTS3900 itch
eNodeB. is turned
MOD CAGROUP CA
is
GERAN
the UEs,
turned
carrier and
on,
does does
flash
not
aggregation not NO
LTE automatic removal of
LST CAGROUP select
CSFB
support
(CA)inter-RAT the
to
group. CA
GERAN
NACC. UEs is that
the
ADD CAGROUP have
enabled twoand
GeranCcoSwitch: or more the If
BTS3900, BTS3900 neighboring
Indicates therelation
type
MOD CAGROUP serving
eNodeB
this switch carriers.
sends is cells If of
system
turned this NO
LTE with
the CA UTRAN group. is
ADD CAGROUPCELL
LST CAGROUP parameter
Indicates
information
on, the GERAN theisof set
identityto of
not allowed.
DSP CAGROUPCELL ANR_UE_CAP(ANR
the
candidate
CA group.
supports target
cell It
change
BTS3900, BTS3900 GeranAutoNrtDeleteS
LST CAGROUPCELL UE Capability),
uniquely
GERAN
order (CCO). cells
identifies to the
UEs
If this ais YES
LTE ADD witch: If this switch
MOD CAGROUPCELL
CAGROUPCELL eNodeB
CA
duringgroup
Indicates
switch
turned is determines
redirection.
within
on,turned
the local an Ifthe
off,cell
LST
RMVCAGROUPCELL
CAGROUPCELL whether
eNodeB.
GeranFlashCsfbSwitch to select CA
BTS3900, BTS3900 identity. Itdoes
GERAN
GeranEventAnrSwitch uniquely not
MOD CAGROUPCELL UEs
is to perform CGI YES
LTE ADD
RMV CAGROUPCELL
CAGROUPCELL is turned
identifies
support
turnedCCO. off,
a cell
on, flash
Nowithin
reading
CSFB
Indicates
an to
UtranSrvccSwitch:
eNodeB. based
GERAN
the on
switch the
is Iffor
LST
DSP CAGROUPCELL
CAGROUPCELL Remove
Indicates (athe flag ID in
ofofthethe
BTS3900, BTS3900 ANR
Indicates
disabled.
the
this capabilities
algorithm
switch theis primary
for
turned
MOD CAGROUPCELL neighboring
eNodeB serving relation the YES
LTE UEs.
serving The cell
ServiceBasedInterFreq
periodically
on, the eNodeB
(PCell)
updating
RMV CAGROUPCELL table)
cell. ofUTRAN
a neighboring
does
priority
HoSwitch:
Indicates not ofIfsingle
select
the
theIf this cell.the The
switch CA
ADD CAGROUPCELL
DSP CAGROUPCELL cell
GERAN IDs.
supports cell this istime radio
set at
to
BTS3900, BTS3900 UEs
greater
is turned
which
parameter
voice thatthe
callthe do
on, is not
parameter
service-
algorithm
set
continuity to for
MOD CAGROUPCELL False, and NO
LTE support
value,
based
periodically
BOOLEAN_TRUE,
(SRVCC). theCGI more
inter-frequency
If reading.
updating
this switch cell
LST CAGROUPCELL Optimization Mode is
probable
handovers
cell
IDs
is IDs
areFREE,
turned forare
begins
periodically
off, CA toUEs
theenabled take
BTS3900, BTS3900 MOD CELLIDPRDUPT set to
to
and treat
effect. UEs
updated,does
UTRAN Ifthe using
the cell
insertedswitch as
a
not into their
for NO
LTE LST CELLIDPRDUPT automatic removal of
PCell.
specific
the
the algorithm
system
support type
SRVCC. ofis turned
the inter-RAT
services
on, cell IDs
information,
GeranSrvccSwitch:
neighboring canare be
and
relation If
BTS3900, BTS3900 MOD CELLIDPRDUPT handed over to inter-
periodically
broadcast
this switch
with GERAN cells is to
is updated,
the
turned NO
LTE LST CELLIDPRDUPT frequency
inserted
associated
on, the GERAN
allowed. If cells.
into UEs the If once this
BTS3900, BTS3900 MOD CELLIDPRDUPT switch
system
the time at
supports
Indicates is
GeranAutoNrtDeleteS turned
information,
which
SRVCC.
the period off,
theIf of
service-based
and
algorithm
this broadcast
switch begins
is inter-
to
turned the
to NO
LTE LST CELLIDPRDUPT updating
witch
Indicates is cell
turned
whether IDs.off, to
MOD frequency
associated
take
off, the
automatic effectGERAN handovers
UEs
is
removal once
reached.
does of
enable
are
the disabled. CSPC in cells
BTS3900, BTS3900 CSPCALGOPARA the time
not
under support
inter-RATthe
specifiedSRVCC.
centralized
by
NO
LTE MOD
LST UlQualityInterFreqHoS
this parameter
Cdma1xRttSrvccSwitc is
neighboring
Indicates
control node relation
theswitch DLCloud
in ICIC
ENODEBALGOSWITC
CSPCALGOPARA witch:
reached.
h:
with If
Ifscenarios.
this
GERAN this
switch cellsis isis
BTS3900, BTS3900 H algorithm
BB
turned on, switch.
UL-quality-
Indicates
turned
not
There allowed. on,the
are theswitch
four states. NO
LTE MOD
LST based
used to inter-frequency
enable or
CDMA2000
CdmaAutoNrtDeleteS
DlIcicSwitch_OFF_EN 1xRTT
ENODEBALGOSWITC
ENODEBALGOSWITC handovers
disable the are enabled
redirection
supports
witch:
UM:Indicates SRVCC.
If this switch that DL Ifis
BTS3900, BTS3900 H
H and
algorithm.UEs canThis be switch
MOD this
turned
ICIC switch on,
is disabled. is turned NO
LTE LST handed
does over
notCDMA2000
control to inter-
ENODEBALGOSWITC off, the
CdmaEventAnrSwitch
DlIcicDynamicSwitch_
ENODEBALGOSWITC frequency
redirection cells
or fast to
BTS3900, BTS3900 H 1xRTT
is turned
ON_ENUM:Indicatesdoes on, not No
H ensure
redirection service for CSFB. NO
LTE MOD
LST support
Remove
that dynamic SRVCC.
(a flag DLin ICICthe
ENODEBALGOSWITC continuity
GeranFlashRedirectS
UtranRedirectSwitch:
neighboring when relation the ULIf
ENODEBALGOSWITC is enabled.
signal quality is poor. If
BTS3900, BTS3900 H
H witch:
this
table) switchIf this
of
DlIcicStaticSwitch_ON isswitch
a neighboringturnedand
MOD this switch
GeranRedirectSwitch
on, redirection is turned
to that NO
LTE LST UTRAN
_ENUM:Indicates cell is set to
ENODEBALGOSWITC
ENODEBALGOSWITC off,
are
UTRAN
False,UL-quality-based
turned and is on,
enabled. fast If
static DL ICIC is
inter-frequency
BTS3900, BTS3900 H
H redirection
this switch is
Optimization
enabled. to ModeGERAN
turned is
handovers are to NO
LTE LST can
off,
set beFREE,
redirection
to performed.
DlIcicReuse3Switch_O
ENODEBALGOSWITC disabled.
UranFlashRedirectSwit
UTRAN
automatic is removal
disabled.
N_ENUM:
CsfbAdaptiveBlindHoS None. of
H ch: Ifinter-RAT
this switch and
GeranRedirectSwitch:
the
witch:
If this switch
neighboring This switch
UtranRedirectSwitch is turned
relation
takes
are
on, turned effect
redirection
with CDMA2000 on,only fast when
to cells
BlindHoSwitch
redirection
GERAN
is allowed. If is to
enabled. is
UTRAN If
enabled.
can be performed.
this switch
CdmaAutoNrtDeleteS If is turned
CsfbAdaptiveBlindHoS
LoadBasedSwitch:
off, redirection
witch is turned to off, If
decrease
eNodeB
option
disable will
theask
ishandover
not number
selected, the
applied
of
U2000
the ping-pong
eNodeB to uplink
for the actual
configures data
signaling
Indicates
from UEs optimization.
the
in theswitch case
handovers,
cell
a global identifier
secondary
ReduceInvalidA1A2Rp thereby
used
of uplink
Indicates
increasing
(CGI) toand enable
congestion.
thePLMN
the switch orlist for
UEs' In
component
Indicates
tSigSwitch: the carrier
collective
Indicates
disable
this
the
handover
for a case,
TCPcell UL Proxy ICIC
uplink
broadcasting
success in the
(SCC)
switch
whether for the
todomain.
optimize UE
RAN If using
frequency
congestion
Enhancer
rate.
PLMNs If this in (TPE)an may
switch RR occur
MOD the default
information
the sequence value inTPE ofisthe
this
in the switch
algorithm.
turned
manner eNodeB,
off,after is
The
the set
the but to
UE
ENODEBALGOSWITC IE
management
delivering A1/A2 (RIM)
OFF,
fairness
algorithm
adjustment
reports ULthe ICIC
and uses CGI
is not inACKofthe the
BTS3900, BTS3900 H supportedBandwidthC
function.
measurement
frequency
differentiation
splitting
performed.
cell during domain
to increase
ANR for isthe NO
LTE MOD
LST ombinationSet
UTRAN_RIM_SWITC
configurations defined
during
disabled
combined
data rate of TCP
IntraFreqReselOptSwit
measurements. in the
services Ifswitch
bothare
ENODEBALGOSWITC
ENODEBALGOSWITC in
H: 3GPP
Indicates
coverage- or the
eNodeB
ensured.
services
ch: If this cells.
at the
checkIfor If this
initial
box
BTS3900, BTS3900 H
H
NBSLTEPLMNRoundS
specifications.
used toisenable
frequency-priority- this is
switch
A UE and
stage.
selected,
witch isIf set
considered
this
the to
switch
eNodeB to
is NO
LTE MOD
LST option
disable
based
Indicates is theselected,
handovers.
the RIM location the
If
STATIC,
have
turned
dynamically combined
on,
NBSLTERANSharingS static
the adjusts UL
TPE ICIC
ENODEBALGOSWITC eNodeB
procedure
Indicates
this
services option does
the
(LCS) that
isenabled not
selected:
switchswitch.
in the
services
algorithm frequency
intra-frequency
witch are ifevent-driven
is the
turned UE on, has
BTS3900, BTS3900 H
H configure
requests
used
(1) In
OtdoaSwitch:to an
coverage-based
enable SCCIf or
the for
MOD domain
two
and
This or
applies
parameter
reselection
NBSLTEPLMNRoundS is
more enabledflow-
only to in NO
LTE LST the
multiple
disable UE.
handovers,
switch is reports
theturned eNodeB-
the from
on,
ENODEBALGOSWITC the
includeseNodeB
controllable
UEs that
parameters,
witch overrides newly
the cells.
non-GBR
following
which access If
ENODEBALGOSWITC PccAnchorSwitch:
UTRAN
level
eNodeB
observed energy cells.
delivers
time If this A2
BTS3900, BTS3900 H this
bearers.
or
three switch
reaccess
reduces switches:
NBSLTERANSharingS isthe
Fairness
unnecessary set to and
H Indicates
switch
conservation
measurement
difference is whether
turned
of arrival- on,
function. tothe NO
LTE MOD
LST DYNAMIC,
differentiation
network.
UtranFreqLayerMeasS
handovers
witch.
Indicates If
the dynamic
this
and for
switchswitch for
enable
eNodeB
eNodeB-level
configurations
based the can
(OTDOA-based)anchor send
energy
to TPE UEs
ENODEBALGOSWITC
ENODEBALGOSWITC UL
witch, ICIC
combined
is turned
ensures
NBSLTERANSharingS
reporting inoff,
steady
the thethe
services PCI of a
function
RAN-INFORMATION-
conservation
first, and
positioning ofthen the can primary
delivers
isdisabled.
enabled. be
BTS3900, BTS3900 H
H frequency
UE
handover
witch:
conflictareIfensured
algorithm
UtranFreqLayerBlindSthis
alarm. isdomain
success switch if the
Ifturned
this isis
MOD component
REQUEST
implemented
A1
If the measurement
switch carrier
protocol
isbased on NO
LTE LST enabled
uplink
witch,
rate.
turned
switch If isthis
on, in
scheduling
and turned the
some
check eNodeB
on, box
ENODEBALGOSWITC (PCC).
data
symbol units
configurations
off, This
power
OTDOA-based (PDUs) switchsaving.
to UEsto isan
ENODEBALGOSWITC cells,Dynamic
algorithm
Indicates
UtranSrvccSwitch.
is
neighboring
deselected, the
allocates ICIC
switch
BTS3900, BTS3900 H
alarm
not
UTRAN
symbol
after
positioning ispower
subject
receiving reported
cells toeNodeBs
is to the
the
saving
event
disabled. in
H and static
bandwidths
used to
UtranSrvccSwitch
eNodeB
provide
case of enable
cells
PCIdoes ICIC to thatnot
collision will
these
orevent-
work not or NO
LTE MOD
LST settings
request
applies
A2 reports, of
multiple
only reducing
to LTE-
take
disable
takes
adjust
in
PCI RAN effect
flow-controllable when
the preemption
effect
intra-frequency
confusionsharing only to the
non-
when
mode.
notify
ENODEBALGOSWITC
ENODEBALGOSWITC FreqCfgSwitch
driven
only
signaling base reports.overheads
stations. Ifof the
this If in
UL
GBR
based adaptive
bearers
on
UtranFreqLayerMeasS
reselection
In this
users. situation,
If thistheICIC number
based
switch if is on
BTS3900, BTS3900 H
H CaAlgoSwitch
switch
this
reporting is
function
UlJointReceptionOver turned
unnecessaryis off, the
switch
weighting
of users.
witch
parameters. is of the
turned
IntraRatEventAnrSwitc
turned off, factors
alarms cell on. is
for If NO
LTE MOD
LST parameter.
eNodeB
enabled,
event
BBUsSwitch: A1. cannot
the(2) In send
eNodeB
turned
uplink on.
IntraOpUeNumPreemp
scheduling
UtranFreqLayerMeasS
UtranUnnecHoOptSwit
h or
related to PCI conflict
ENODEBALGOSWITC
ENODEBALGOSWITC SccBlindCfgSwitch:
RAN-INFORMATION-
shuts
frequency-priority-
Indicates down whether PAs onto the
BTS3900, BTS3900 H priorities
tSwitch:
witch
ch:
are
REQUEST not
Indicates is
IntraRatFastAnrSwitch
If this This
turned
check
reported.
whetherPDUs on,box the
aunit
to is
H corresponding
based
enable handovers,
the
(UlschPriorityFactor).
parameter
UTRAN BBU-based
indicates
hierarchy- RF the If NO
LTE MOD
LST selected,
is turned
secondary
UTRAN
when
eNodeB on
the
cells
itmeasurement
detects
delivers for
serving eNodeB
to thatthe A1cell
ENODEBALGOSWITC coordination
this
the
based switch
switch
dynamically
local eNodeB, used
is algorithm
turned
adjuststhe to local
ENODEBALGOSWITC (SCell)
request
OFDM
measurement
switch. can be
multiple within
symbols
When blindly
event-
BTS3900, BTS3900 H
H on,
enable thereports.
algorithm
parameters
eNodeB
configured.
driven or
scheduling
willdisable
takes about
ask
This thethe
effect
switch
MOD the
configurations
subframes
UlJointReceptionOver
algorithm
intra-operator
for measurements is notifiedto
do UEs
not to NO
LTE LST Indicates
handovers
U2000
takes
first, and for
effect
GERAN_RIM_SWITC
contain any the
thenthe
fromonlyswitch
PLMN
downlink E-
deliverswhen
ENODEBALGOSWITC
ENODEBALGOSWITC BBUsSwitch
limit
preemption
related
controls
UTRAN
list forthe to numbercoverage-
whether under
based of
to this
on
the
H:
data
A2 toaand
measurement
parameter
resource
the number
to
FreqCfgSwitch
Indicates cellUTRAN.
transmit. is
blocks
after
the switch
ofturned
users.
the
This
(RBs)
BTS3900, BTS3900 H
H based
enable
This
UE
option
used
reduces reports
to
configurations the
adjustment
of the
enable
static
CSFB-
eNodeB
the CGI
or
power
to UEs toIf
of NO
LTE MOD
LST on, the
Indicates
allocated
this
triggeredswitch
periodically
reduces
the cell uplinkthe
to is
handovers
during
unnecessary the switch
turned
select ANR UE UEs in
CaAlgoSwitch
disable
ENODEBALGOSWITC
ENODEBALGOSWITC consumption
after
coordinated
used
the
on,
from case
when
performing
handovers to the
receiving
EUTRAN
measurements. enable
ofathat
RIM
user and
uplink
voice
from
event
multi-point
toor
IfE-the
parameter
procedure
hence
A1
(UL report,
CoMP) conserves is
reducing not
function
BTS3900, BTS3900 H
H
MOD
disable
congestion.
cannot
UTRAN.
services
UTRAN
UE
requests
energy has
selected.
signaling
the
access
If
and
reported
forto This
eNodeB-
According
UTRAN,
event-driven
overheads
the
the
evaluate
switch the is in NO
LTE LST enabled
level
to
network
increases
PLMNlist, commercial
the quality between
related
UtranFreqLayerBlindS
voice because
theto based
local cells
of on
ENODEBALGOSWITC applies
multiple
eNodeB.
reporting
established only
reports
unnecessary
on LTEfrom
LBBPs
ENODEBALGOSWITC mobile
specifications,
the
witch user alert
is turnednumber system
BTS3900, BTS3900 H
H
the
eNodeB
FDD
GERAN
event
in
voice
probabilitycells.
different
(CMAS). A2. quality
will
cells. that not
IfBBUs.
this Ifon,
UEsaskthe
this
however,
restriction,
UTRAN
monitoring
camp
the
switch U2000 inis LTE
on,the the
hierarchy-
(VQM)
for user
networks,
the
turned on, the the NO
LTE MOD
LST MultiQciHoExecOptSw
When
scheduling
can
based
and
PLMN
eNodeB preempt
algorithm.
improves
list. Italgorithm
blind-handover
configures
can resources
issend
the user a
ENODEBALGOSWITC
ENODEBALGOSWITC itch: Indicates
UlJointReceptionOver whether
cannot
of other
algorithm
recommended
experience.
NBSUTRANRANShari
candidate
RAN-INFORMATION- decide
lower-priority
takes
SCell If how effect
that
this as this
an
BTS3900, BTS3900 H
H the handover
BBUsSwitch decision
under this
MOD many
users
for
check
ngSwitch:
SCell
REQUEST RBs
served
coverage-based
parameter boxaIfis
for to
be
CA this
PDUs be
byset
UE the
to
switch
to NO
LTE LST is triggered
parameter is based
turned on
ENODEBALGOSWITC allocated
same
and
is turned
without
CERAN operator.
CSFB-triggered
VQM_ALGO_SWITCH
deselected, A4 to each
on,
cells thesome If this
toresult
ENODEBALGOSWITC the
off, admission
Indicates
the UL whether
CoMP to of
is of
BTS3900, BTS3900 H bearer.
switch
blind
_ON
eNodeB
neighboring
measurements.
request is The
handovers
when turned
does
multiple number
voice
NodeBsnot off,
Iffrom
this
event-
H all QCIs
enable
disabled in
eNodeB-level
betweenSPID-based cells NO
LTE MOD
LST RBs
preemption
EUTRAN
services
perform
provide
switch
driven that the
iscellseach
areto is
off,
reports. not
UTRAN.
that
the non-
encodedIfLBBPswork
this If
handovers
mobility
established
GBR
allowed. bearer
UtranSrvccSwitch load toon canHPLMN useis is
ENODEBALGOSWITC
ENODEBALGOSWITC based
adjustment.
in UTRAN
eNodeB
switch on adaptive
is delivers
turned In the
sharing A4the
off,
and
in frequency-priority-
balancing.
different
determined
InterOpUeNumPreemp
turned on, BBUs.
the based UTRAN on
BTS3900, BTS3900 H
H multirate
current
mode.
measurement
eNodeB In (AMR).
version,
this
cannot this
situation,
send
MOD based
INTER_FREQ_IDLE_
the
tSwitch: handovers.
FreqCfgCaOverBBUsS
Indicates
prioritized the
This switch
bit If
rates NO
LTE LST SRVCC
parameter
if hierarchy-
UtranEventAnrSwitch
configurations
RAN-INFORMATION- only for
ENODEBALGOSWITC this
(PBRs)
parameter
based option
MLB_SWITCH:
witch:
used tomeasurement
enable
and ispriorities
selected,
indicates or
ENODEBALGOSWITC reduces
or UtranFastAnrSwitch
measuring
REQUEST unnecessary
the
PDUs to
BTS3900, BTS3900 H the
disable
of
the the handover
Indicates
switch
algorithm
Indicates whether
neighboring
associated used
whether
takes decision
to
effectto
the
H handovers
is turned
frequency
GERAN on
cells offrom for
atothe LTE NO
LTE MOD
LST is triggered
Indicates
enable
GERAN
logical
enable
for
RAN eNodeB-level
SRVCC-triggeredor
channels
or
information whether
inter-BBU only
UTRAN
disable whenthe
rather
the cell
TDD
local
candidate
request
all QCIs networks
eNodeB,
inter-frequency SCellthe
multiple
are toload
beforelocal
event-
ENODEBALGOSWITC
ENODEBALGOSWITC eNodeB
carrier
optimization
than
inter-operator
handovers
management based acting
aggregation on
from for(RIM) as
blind the
UTRAN
eNodeB
Indicates
configuring
driven and
will
whether ask
theapplies the to
BTS3900, BTS3900 H
H balancing
cluster
(CA)
handovers.
EUTRAN
procedure
only
U2000 inreports.
successfully
to
partition
scenarios
UlschPriorityFactor.
preemption LTE
for tofor
isbased
the
admitted.
UEs
UTRAN.
TDDinitiated
PLMN
node in
on
cells. As NO
LTE MOD
LST enable
candidate
If this
idle
groups mode. network
option
cells SCell
If is
the
into not as an
where
a
the
by result,
list number
the
for aCA if is
this
eCoordinator.
GeranUnnecHoOptSwi cell of
after switch
users. the IfIf
is
ENODEBALGOSWITC
ENODEBALGOSWITC performance
SCell
selected, for
INTER_FREQ_IDLE_
clusters forthe
the CSPC CA
handover UE. inand
configured
turned
this
tch:
UE switch
reports on,
parameter
If thisischeck based
fairness
isthe turned
is
CGI on
set
box to
ofis
BTS3900, BTS3900 H
H optimization
FreqCfgSwitch:
decision
MLB_SWITCH
Cloud BB when
triggered
scenarios. option the
frequencies.
differentiation
on,
Indicates
ON, the
selected,
the the
cell inter-operator
RIM whether
during
the This
for
eNodeB
ANR to NO
LTE MOD
LST network
Indicates
when
of thisany is
parameter heavily
whether
of the QCIsto
and
switch
combined
preemption
enable
procedure
dynamically
measurements. applies
optimization
services
isbased only
initiated
adjusts If the to
on
ofona
ENODEBALGOSWITC
ENODEBALGOSWITC loaded.
configure
is
the successfully This frequencies
LTE
UE
the FDD
handover-related
may
number be cells.affected.
of This
BTS3900, BTS3900 H
H
by the
parameters
UE has
parameter
or CA groups
admitted.
ADAPTIVE_PROPOR
switch
eCoordinator.
reported
takes
about
includes for CA.is
users
effect
the the If
MOD allowed.
common
this
handovers
PLMNlist,
followingparameter Ifswitch:
this
the
from switch
isE-
local set to NO
LTE LST This
TION
only switch
ReduceInvalidFreqPri
whenoption applies
of the
ENODEBALGOSWITC
ENODEBALGOSWITC is
configurations
OFF,turned
UTRAN
eNodeB tothe
SPECSIGRETRANSO
only LTEto off,
RIM
will GERAN. the
not
FDD and inter-
askcells.
HoSwitch:
InterFreqIdleMlbMode
FreqCfgSwitch
operator
algorithms.
procedure Indicates
preemption
is This of
initiated the
BTS3900, BTS3900 H
H This
the
If this
whether U2000
PTSWITCH: adjustment
switch to for
avoid is the
Indicates
on, CA
MOD parameter
CaAlgoSwitch
based
parameter
by the on
core theare
includes number
network. the NO
LTE LST reduces
PLMN
whether
can
repeated be list.unnecessary
to
configured optimize
switches
ENODEBALGOSWITC selected,
parameter
of
following
users is the in
switches:
not eNodeB
the allowed.
ENODEBALGOSWITC handovers
NBSGERANRANShari
special
based
between signaling
onthe from
frequencies. E-
BTS3900, BTS3900 H timely adjusts
ENodeBAlgoSwitch
BasedSriGapOptSwitc the
H UTRAN
ngSwitch:
retransmission.
If this switch
frequency-priority- to IfGERAN, this
isUEs Ifswitch
off, this
CA NO
LTE MOD
LST proportions
MO
h: is
Indicates on. of
whether toto
increases
is
can turned
switch
based
be be
released is on,
configuredthe
intra-eNodeB some
the
among
ENODEBALGOSWITC
ENODEBALGOSWITC consider
probability
neighboring transmission
ofbased
BTSs
UEs
eNodeB
based
handover
frequencies onadaptively
CA
algorithm groups. on
BTS3900, BTS3900 H
H of scheduling
camping
provide cells
in request
E-UTRAN,
that work
configures
SccA2RmvSwitch:
and
the the
current the
load-based proportions NO
LTE LST indicators
and
in GERANimproves (SRIs)
sharing thewhen user
maximum
Indicates
intra-eNodeB
of UEs in whethernumber
connected of
to
ENODEBALGOSWITC configuring
experience.
mode. In this If situation,
this
special
deliver
handover
mode signaling
A2
among algorithm. If
H measurement
check
if box is gaps for
retransmissions
measurement
this option
frequencies is andselected, that
the
a UEbe
deselected, not
GeranEventAnrSwitch
can
configurations in the
initiated the for by of the
the
preset eNodeB
discontinuous proportions evaluates
eNodeB
or
RLC
measuring
whether layer does
to(DRX)based
a
perform not on a
UEs
reception in idle modestate.
perform
GeranFastAnrSwitch
the number
secondary
frequency-priority-
among the
frequencies, of UEs in is
component
adjustment.
turned
the
carrier
based
ensuring on
cell.intra-eNodeB
Ifthat
(SCC) for
this Inthe thelocal
switch
after
the theis
current version,
eNodeB, the local this
mode.ADAPTIVE_PR
cyclic shift (CS) is
OPORTION:
used in preamble Indicates
whether
generation
LOADNOTBALANCES the in eNodeB
high-
adjusts
speed the
mobility
CHSWITCH:Indicates proportions
of UEs intoidle
scenarios.
whether Ifenablemode
this
MOD among
parameter frequencies
MAC scheduling is set to
ENODEBALGOSWITC during
ON, CSeNodeB-level
optimization is used in
for cells
BTS3900, BTS3900 H inter-frequency
preamble
with unbalanced generation load
inter-in
MOD balancing
high-speed for UEs
mobility in NO
LTE LST cell or intra-cell (uplink
ENODEBALGOSWITC
ENODEBALGOSWITC idle mode.If
scenarios,
and downlink) loads in andthe the
BTS3900, BTS3900 H
H ADAPTIVE_PROPOR
number
heavy traffic of root scenarios.
ADD TION optionrequired of this NO
LTE LST sequences
The optimization is in
LICRATIOSHAREPOL
ENODEBALGOSWITC parameter
the cell is and
relatively the this
enabled
Indicates only
the when
BTS3900, BTS3900 ICY
MOD
H ENODEBMLB INTER_FREQ_IDLE_
small.
LST switch Ifisthis
proportion on. parameter
of traffic NO
LTE LST ENODEBMLB MLB_SWITCH
is set to OFF, CS optionis
LICRATIOSHAREPOL used
of the by the operator
MlbAlgoSwitch
ADD not used in preamble
BTS3900, BTS3900 ICY when
Indicates the the eNodeB of is
LICRATIOSHAREPOL parameter
generation
shared among in ID
are high- the
YES
LTE MOD
ICY operator.
selected,
speed mobilitythe eNodeB
LICRATIOSHAREPOL operators.
timely adjusts Thisthe
MOD scenarios, and the
BTS3900, BTS3900 ICY parameter
Indicates
proportions the must
of switch
UEs be to set
for
LICRATIOSHAREPOL number
Indicates of theroot
whether time to NO
LTE RMV based
forcibly
be on
released the
activating contract
among a
ICY
MOD sequences
delay
prohibit ofby the
the required
frame start
eNodeB in
LICRATIOSHAREPOL signed
TDD cell.
frequencies operators.
Ifrelatively
this
based onIf
BTS3900, BTS3900 LST
TDDFRAMEOFFSET the
time
from cell
for is
all
settingis TDD up E-
ICY
LICRATIOSHAREPOL
this
the
large.
parameter
parameter
current setisato
proportions cell to
set NO
LTE LST UTRAN
or
0,
ON, sector
services
a TDD cells
(that under
except
cell is not
can the
be
ICY
MOD
TDDFRAMEOFFSET of UEs among
eNodeB to the time of
bound
emergency
activated
frequencies to baseband
when calls
and no of
the this
BTS3900, BTS3900 TDDRESMODESW the reference
equipment)
operator areon notclock.
the
clock
preset resource
proportions is NO
LTE LST Indicates
baseband
admitted.
available. the
If switchoffor
equipment
this
MOD
TDDRESMODESW UEs
RF among
module
BTS3900, BTS3900 TDDRESMODESW
that has been
parameter
frequencies, isregular
setbound
ensuring to to
time
another
OFF, sleep.
a cell
TDD Cells
orcell are
sector. NO
LTE MOD
LST that the proportions of
unavailable
If this
cannot
Indicates parameter
bethe after
activated
strategy the
is set
ENODEBAUTOPOWE
TDDRESMODESW UEs in idle mode
eNodeB
to
when
for ON and
no
allocating enters
clock theresource RF
BTS3900, BTS3900 ROFF among frequencies
MOD module
baseband
resource
blocks regular equipment
(RBs)available.
is time NO
LTE LST approaches
sleep. After tointhe
the
the
ENODEBAUTOPOWE
ENODEBAUTOPOWE is bound
uplink
preset of to acell.
the
proportions. cell If orthis
Indicates
eNodeB
sector, a exitthe
cell RFtime
or sector for
BTS3900, BTS3900 ROFF
ROFF parameter is set to
MOD enter
module
that RF
is not module
regular boundtime to the NO
LTE LST FS_NONFS_ADAPTIV
ENODEBAUTOPOWE regular
sleep,
baseband ittime
is in sleep.
the
equipment
ENODEBAUTOPOWE E, this strategy
Indicates the time for
BTS3900, BTS3900 ROFF normal
cannot state.
ROFF exit RF be
adaptively module set
switches upregular
on it. NO
LTE LST between frequency
MOD time sleep.
ENODEBAUTOPOWE selective scheduling
BTS3900, BTS3900 CELLULSCHALGO
ROFF and non-frequency NO
LTE
DBS3900 LST
selective scheduling. If
LTE/BTS3900 CELLULSCHALGO Indicates the number
this parameter is set to
LTE/BTS3900A None of the baseband
FS_INRANDOM_ADA YES
DBS3900
LTE/BTS3900L ADD equipment.
PTIVE, this strategy
LTE/BTS3900
LTE/BTS3900AL LTE EUTRANEXTERNALC adaptivelythe
Indicates switchescell
type of
LTE/BTS3900A None
ELL betweenoffrequency
identity the external YES
DBS3900 baseband equipment.
LTE/BTS3900L ADD
ADD selective
E-UTRAN scheduling
cell. It
LTE/BTS3900
LTE/BTS3900AL LTE Indicates the eNodeB
EUTRANEXTERNALC
EUTRANEXTERNALC The
and name
interference-
uniquely of the cell
LTE/BTS3900A None identity ofidentifies
the external a NO
DBS3900 ELL
ELLBAND template.
randomization-based
cell within an eNodeB.
LTE/BTS3900L ADD E-UTRAN cell. It
LTE/BTS3900
LTE/BTS3900AL LTE LST scheduling.
The 28-bitidentifies
uniquely E-UTRAN an
EUTRANEXTERNALC
EUTRANEXTERNALC
EUTRANEXTERNALC The
cell name ofisthe radio
identity
LTE/BTS3900A None
ELL eNodeB within a NO
DBS3900 ELLBAND
ELL template.
comprised
LTE/BTS3900L ADD
ADD PLMN. Theof28-bit the cell E-
LTE/BTS3900 LST
LST identity
LTE/BTS3900AL LTE EUTRANEXTERNALC
EUTRANEXTERNALC UTRAN(represented
Indicates celltheidentitymobile is
LTE/BTS3900A EUTRANEXTERNALC
EUTRANEXTERNALC by the least
ELL
ELLBAND
country
comprised code ofsignificant
of the
the cell YES
DBS3900
LTE/BTS3900L ELL
ELLBAND eight
ADD
LST identity and thethe
external bits) and
E-UTRAN
LTE/BTS3900
LTE/BTS3900AL LTE LST
MOD Indicates
eNodeB the mobile
ACT CELL
EUTRANEXTERNALC
EUTRANEXTERNALC eNodeB identity.
cell. identity The
LTE/BTS3900A EUTRANEXTERNALC
EUTRANEXTERNALC network
cell
The global code identity of the YES
DBS3900 ADD
ELL CELL
ELLBAND (represented by the of
PLMN consists
LTE/BTS3900L ELLBAND
ELL external
(CGI)
the of an E-UTRAN E-UTRAN
LTE/BTS3900 ADD
LST
LST CELLBAND mostMCC and
significant the20
LTE/BTS3900AL LTE MOD
RMV
BLK CELL cell.
cell
MNC. is comprised of the
LTE/BTS3900A EUTRANEXTERNALC
EUTRANEXTERNALC bits). The cell global YES
EUTRANEXTERNALC
EUTRANEXTERNALC The
E-UTRAN
The PLMN consists
cell identity of
DBS3900
LTE/BTS3900L DEA
ELL CELL
ELLBAND identity (CGI) of an of
MCC consists E-
ELL
ELL
DSP CELL the
and
three MCC
the and
PLMN
digits. the
ID. For
LTE/BTS3900
LTE/BTS3900AL LTE LST
MOD UTRAN cell is
RMV
RMV MNC.
details, see
LTE/BTS3900A DSP
EUTRANEXTERNALC
EUTRANEXTERNALC
The MNC
comprised of3GPP
consists the E-TS of YES
DBS3900 EUTRANEXTERNALC
EUTRANEXTERNALC
CELLULCOMPCLUST The
36.413.
two MCC
to three consists
digits. of
LTE/BTS3900L ELLBAND
ELL UTRAN
Indicates cell identity
the local ID
LTE/BTS3900 ELL
ELLBAND
ER three
For digits.
example, MCC =
LTE/BTS3900AL LTE MOD
RMV and
of thethe PLMN
cell. It 45, ID. For
uniquely
LTE/BTS3900A RMV
DSP PRIBBPADJUST The
123, MNC
MNC consists
= PLMN of YES
EUTRANEXTERNALC
EUTRANEXTERNALC details,
identifies see a cell 3GPP within aTS
DBS3900
LTE/BTS3900L EUTRANEXTERNALC
LST CELL two
= to three
12345. digits.
ELL
ELL 36.413.
BS.
LTE/BTS3900
LTE/BTS3900AL LTE ELLBAND
LST CELLBAND For example, MCC =
RMV The
LTE/BTS3900A RMV
None
MOD CELL 123, name
MNC = of45, thePLMN site
NO
EUTRANEXTERNALC
EUTRANEXTERNALC template.
LTE/BTS3900L RMV CELL = 12345.
ELL
ELLBAND
LTE/BTS3900AL LTE RMV
RMV CELLBAND
STR
EUTRANEXTERNALC
CELLRFLOOPBACK
ELLBAND
STR CELLSELFTEST
UBL CELL
DBS3900
Indicates the ID of the
LTE/BTS3900
end point group to
LTE/BTS3900A None YES
DBS3900 which an end point
LTE/BTS3900L Indicates
LTE/BTS3900 ADD belongs. the ID of the
LTE/BTS3900AL LTE end point group to
LTE/BTS3900A SECONDARYOP2GR
None YES
DBS3900 OUP which an end point
LTE/BTS3900L ADD Indicates
LTE/BTS3900 RMV belongs. the ID of a
LTE/BTS3900AL LTE EUSECTOREQMGRO secondary operator in
LTE/BTS3900A SECONDARYOP2GR
UP YES
DBS3900 a carrier-sharing
LTE/BTS3900L OUP
ADD
ADD
LTE/BTS3900 ADD SECTOR operator group.
LTE/BTS3900AL LTE LST
EUSECTOREQMGRO
EUSECTOREQMID2G Indicates the number
LTE/BTS3900A MOD SECTOR
SECONDARYOP2GR
UP YES
DBS3900 ROUP of the sector.
LTE/BTS3900L RMV
OUP
ADD SECTOR
LTE/BTS3900
LTE/BTS3900AL LTE LST
ADD SECTOREQM Indicates the number
LTE/BTS3900A EUSECTOREQMID2G
EUSECTOREQMGRO
MOD SECTOREQM of the sector YES
DBS3900
LTE/BTS3900L ROUP
UP
RMV SECTOREQM equipment.
LST Indicates the local cell
LTE/BTS3900
LTE/BTS3900AL LTE LST
EUSECTOREQMGRO identity. It uniquely
LTE/BTS3900A EUSECTOREQMID2G
ADD YES
DBS3900 UP identifies a cell within
LTE/BTS3900L ROUP
SERVICEAREAID2LIS
LTE/BTS3900 LST an eNodeB.
Indicates the group ID
LTE/BTS3900AL LTE MOD
T
LTE/BTS3900A EUSECTOREQMID2G
EUSECTOREQMGRO
DSP CELLMBMSCFG of the sector devices YES
DBS3900
LTE/BTS3900L ROUP
UP CELLMBMSCFG
ADD that servethe
Indicates theRNC cell. cell
cell
LST local
LTE/BTS3900
LTE/BTS3900AL LTE MOD
RMV
UTRANEXTERNALCE ID of an Itexternal
LST identity. uniquely
LTE/BTS3900A EUSECTOREQMGRO
EUSECTOREQMGRO
LL UTRAN YES
DBS3900 SERVICEAREAID2LIS identifiescell. It within
a cell
LTE/BTS3900L UP
ADD
UP
ADD Indicates
uniquely the ID of athe
identifies
LTE/BTS3900 T an eNodeB.
LTE/BTS3900AL LTE RMV
UTRANEXTERNALCE
RMV
UTRANEXTERNALCE end within
cell point group
an RNC. to
LTE/BTS3900A MOD
None CELLMBMSCFG YES
DBS3900 EUSECTOREQMGRO
LL
EUSECTOREQMID2G
LLBAND
RMV which
The an end
28-bit UTRANpoint cell
LTE/BTS3900L ADD
UP
ADD Indicates the ID of of the
the
LTE/BTS3900 ROUP
LST
SERVICEAREAID2LIS belongs.
ID is comprised
LTE/BTS3900AL LTE UTRANEXTERNALCE
RMV
UTRANEXTERNALCE end point
Indicates group
the to
mobile
LTE/BTS3900A UTRANEXTERNALCE
T
None RNC cell ID and the YES
DBS3900 LL
EUSECTOREQMID2G
LLBAND
LL whichID
country
RNC ancode
endare
that point
of the
LTE/BTS3900L ADD
ADD
LTE/BTS3900 ROUP
LST
LST belongs.
external
represented UTRAN by the cell.
LTE/BTS3900AL LTE UTRANEXTERNALCE
UTRANEXTERNALCE Indicates the mobile
LTE/BTS3900A UTRANEXTERNALCE
UTRANEXTERNALCE The
leastPLMN
Indicates theconsists
significant RNC 16 ID of
bits YES
DBS3900 LL
LLBAND
LL network
the MCC code
and theofUTRAN
the
LTE/BTS3900L LLBAND of
andthe external
the most
ADD
LST external
LTE/BTS3900
LTE/BTS3900AL LTE LST
MOD MNC.
cell. The UTRAN
significant 28-bit cell.
UTRAN
12 bits,
LTE/BTS3900A UTRANEXTERNALCE
UTRANEXTERNALCE
UTRANEXTERNALCE The
The PLMN
MCC consists
consists of
UTRANEXTERNALCE
LLBAND
cell ID The ofof
is comprised
respectively. YES
DBS3900
LTE/BTS3900L LL
LLBAND
LL the
three
the MCC
RNC
formula and
digits.
cell
for the
ID and
calculating
LTE/BTS3900
LTE/BTS3900AL LTE LST
LST
MOD MNC.
TheRNC MNCID consists of
RMV the UTRAN that
cell IDareis
LTE/BTS3900A UTRANEXTERNALCE
UTRANEXTERNALCE The MCC consists
UTRANEXTERNALCE
UTRANEXTERNALCE two to three
represented
as follows: by the of
digits.
UTRAN cell YES
DBS3900
LTE/BTS3900L LL
LLBAND
LL three
For digits.
LTE/BTS3900 LL
LST ID =example,
least RNC ID xMCC
significant = +
16 bits
65536
LTE/BTS3900AL LTE MOD
RMV
RMV The
123,
and
RNCthe MNC
MNC consists
cellmost= 45,
ID. For PLMN of
LTE/BTS3900A UTRANEXTERNALCE
UTRANEXTERNALCE
UTRANEXTERNALCE two
= to three
12345.see123GPPdigits. YES
significant
details, bits, TS
LTE/BTS3900L LLBAND
LL
LL For example,The MCC =
LLBAND respectively.
25.401.
LTE/BTS3900AL LTE MOD
RMV
RMV 123, MNC = 45, PLMN
formula for calculating
UTRANEXTERNALCE
UTRANEXTERNALCE
UTRANEXTERNALCE = 12345.
the UTRAN cell ID is
LL
LL
LLBAND as follows: UTRAN cell
RMV
RMV ID = RNC ID x 65536 +
UTRANEXTERNALCE
UTRANEXTERNALCE RNC cell ID. For
LL
LLBAND details, see 3GPP TS
RMV
25.401.
UTRANEXTERNALCE
LLBAND
Mandatory Dynamic Attribute Feature ID Feature Name
LOFD-002001 /
Automatic Neighbour
TDLOFD-002001
NO NO Relation (ANR),
LOFD-002002 /
Inter-RAT ANR
TDLOFD-002002
LOFD-002001 / Automatic Neighbour
NO NO
TDLOFD-002001 Relation (ANR)
FD-002002 / TDLOFD-
NO NO Inter-RAT ANR
002002
NO NO None None
LOFD-002002 /
NO NO Inter-RAT ANR
TDLOFD-002002
LBFD-00300201 /
NO NO DiffServ QoS Support
TDLBFD-00300201
LBFD-00300201 /
NO NO DiffServ QoS Support
TDLBFD-00300201
LBFD-00300201 /
NO NO DiffServ QoS Support
TDLBFD-00300201
LBFD-00300201 /
NO NO DiffServ QoS Support
TDLBFD-00300201
NO NO None None
LBFD-00300201 /
YES NO DiffServ QoS Support
TDLBFD-00300201
Ethernet Link
LOFD-003008 /
YES NO Aggregation(IEEE
TDLOFD-003008
802.3ad)
Ethernet Link
LOFD-003008 /
NO NO Aggregation(IEEE
TDLOFD-003008
802.3ad)
Ethernet Link
LOFD-003008 /
NO NO Aggregation(IEEE
TDLOFD-003008
802.3ad)
YES NO None None
Ethernet Link
LOFD-003008 /
NO NO Aggregation(IEEE
TDLOFD-003008
802.3ad)
Enhanced
LOFD-003011 /
NO NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
NO NO Transmission QoS
TDLOFD-003011
Management
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LOFD-003014 /
YES NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
YES NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
NO NO Integrated Firewall
TDLOFD-003014
Compression &
LBFD-003004 /
NO NO Multiplexing over
TDLBFD-003004
LBFD-003004 / E1/T1
Compression &
TDLBFD-003004 Multiplexing over
NO NO
LBFD-00300402 / E1/T1
LBFD-003004 /
TDLBFD-00300402 Compression
PPP MUX &
TDLBFD-003004 Multiplexing over
NO NO
LBFD-00300402 / E1/T1
LBFD-003004 /
TDLBFD-00300402 Compression
PPP MUX &
TDLBFD-003004 Multiplexing over
NO NO
LBFD-00300402 / E1/T1
TDLBFD-00300402 PPP MUX
LBFD-003004 / Compression &
TDLBFD-003004 Multiplexing over
NO NO
LBFD-00300402 / E1/T1
TDLBFD-00300402 PPP MUX
Compression &
LBFD-003004 /
NO NO Multiplexing over
TDLBFD-003004
E1/T1
Compression &
LBFD-003004 /
NO NO Multiplexing over
TDLBFD-003004
E1/T1
Compression &
LBFD-003004 /
NO NO Multiplexing over
TDLBFD-003004
E1/T1
Compression &
LBFD-003004 /
NO NO Multiplexing over
TDLBFD-003004
E1/T1
Compression &
LBFD-003004 /
NO NO Multiplexing over
TDLBFD-003004
E1/T1
Compression &
LBFD-003004 /
NO NO Multiplexing over
TDLBFD-003004
E1/T1
NO NO None None
Transport
LOFD-00301102 /
NO NO Differentiated Flow
TDLOFD-00301102
Control
LOFD-00301202 / Transport Dynamic
NO NO
TDLOFD-00301202 Flow Control
LBFD-00202103 /
NO NO SCTP Multi-homing
TDLBFD-00202103
LBFD-00202103 /
NO NO SCTP Multi-homing
TDLBFD-00202103
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
LOFD-00301101 /
TDLOFD-00301101 Transport Overbooking
NO NO
LBFD-002028 / Emergency Call
TDLBFD-002028
LOFD-00301103 / Transport Resource
NO NO
TDLOFD-00301103 Overload Control
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LOFD-001059 / UL Pre-allocation
NO NO
TDLOFD-001059 Based on SPID
LBFD-002004 /
NO NO Integrity Protection
TDLBFD-002004
LBFD-002004 /
NO NO Integrity Protection
TDLBFD-002004
LBFD-002004 /
NO NO LOFD-00101001 Integrity Protection
TDLBFD-002004 /
TDLOFD-00101001
Encryption: AES
LOFD-00101002 /
NO NO LOFD-00101001 / Encryption: SNOW 3G
TDLOFD-00101002
TDLOFD-00101001 Encryption: ZUC
LOFD-00101003 / Encryption: AES
LOFD-00101002 /
TDLOFD-00101003
NO NO LOFD-00101001 / Encryption: SNOW 3G
TDLOFD-00101002
TDLOFD-00101001 Encryption: ZUC
LOFD-00101003 / Encryption: AES
LOFD-00101002 /
TDLOFD-00101003
NO NO LOFD-00101001 / Encryption: SNOW 3G
TDLOFD-00101002
TDLOFD-00101001 Encryption: ZUC
LOFD-00101003 / Encryption: AES
LOFD-00101002 /
TDLOFD-00101003
NO NO Encryption: SNOW 3G
TDLOFD-00101002
Encryption: ZUC
LOFD-00101003 /
NO NO TDLOFD-00101003
None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
LBFD-002004 /
NO NO Integrity Protection
TDLBFD-002004
LBFD-002004 /
NO NO Integrity Protection
TDLBFD-002004
LBFD-002004 /
NO NO Integrity Protection
TDLBFD-002004
LBFD-002004 /
NO NO Integrity Protection
TDLBFD-002004
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
Intra-Band Carrier
Aggregation for
Downlink 2CC in
Intra-Band
20MHz Carrier
Aggregation for
Inter-Band Carrier
NO NO None Downlink
Aggregation forin
None 2CC
LAOFD-00100101 Intra-Band
20MHz
Downlink 2CC Carrier
in
LAOFD-00100102 Aggregation
Inter-Band
20MHz for
Carrier
NO NO None
LAOFD-00100201 / Downlink
None
Aggregation
Carrier 2CC forin
Aggregation for
LAOFD-00100101 Intra-Band
20MHz
Downlink Carrier
2CC in
TDLAOFD-00100201 Downlink
Aggregation2CC forin
LAOFD-00100102
LAOFD-00100202 / Inter-Band
20MHz
40MHz Carrier
NO NO LAOFD-00100201 / Downlink
Aggregation
Carrier 2CC forin
Aggregation for
TDLAOFD-00100202 Support
Intra-Band
20MHz of UE
Carrier
LAOFD-00100101
TDLAOFD-00100201
LAOFD-070201 / Downlink
Downlink
Category 2CC
2CC
6 in
in
LAOFD-00100102 Aggregation
Inter-Band
20MHz for
Carrier
LAOFD-00100202
TDLAOFD-070201 / 40MHz
CA for Downlink
NO NO LAOFD-00100201
TDLAOFD-00100202/ Downlink
Aggregation
Carrier
Support
2CC forin 2CCfor
Aggregation
of UE
LAOFD-070202
LAOFD-00100101 From
20MHz Multiple
Intra-Band
Downlink Carriers
Carrier
2CC in
TDLAOFD-00100201
LAOFD-070201 /
TDLAOFD-00100111 Downlink
Category
Carrier 2CC in
6 Carrier
Aggregation
Aggregation for for
LAOFD-00100102
LAOFD-00100202 Inter-Band
20MHz
NO NO TDLAOFD-070201 / 40MHz
CA
2CC for
DownlinkDownlink
based
Aggregation2CCon
forin 2CC
LAOFD-00100201
TDLAOFD-00100202
LAOFD-070202 / Carrier
Support
From Aggregation
of UE
Multiple for
Carriers
LAOFD-00100101
TDLAOFD-00100201 Coordinated
20MHz
Downlink
Downlink 2CC
2CC BBUin
in
LAOFD-070201 /
TDLAOFD-00100111 Category
Carrier 6
Aggregation
Intra-band
Inter-Band Carrier for
Carrier
LAOFD-00100102
LAOFD-00100202
TDLAOFD-070201 / 20MHz
40MHz
CA for Downlink
NO NO LAOFD-00100201
TDLAOFD-00100202/ 2CC based
Aggregation
Carrier
Support for 2CCfor
on
Aggregation
of UE
LAOFD-070202
LAOFD-00100101 From Multiple
Coordinated
Downlink 2CC Carriers
BBUin
TDLAOFD-00100201
LAOFD-070201 /
TDLAOFD-00100111 Downlink
Category
Carrier 2CC in
6Carrier
Aggregation for
LAOFD-00100102
LAOFD-00100202 Intra-band
30MHz
20MHz
NO NO TDLAOFD-070201 / 40MHz
CA
2CC for Downlink
based
Aggregation on
for 2CC
LAOFD-00100201
LAOFD-070202 /
TDLAOFD-00100202 Carrier
Support
From Aggregation
of UE
Multiple for
Carriers
TDLAOFD-00100201 Coordinated
Downlink
Downlink 2CC
2CC BBUin
in
LAOFD-070201 /
TDLAOFD-00100111 Category
Carrier 6Carrier for
Aggregation
Intra-band
LAOFD-00100202
TDLAOFD-070201 / 30MHz
40MHz
CA for Downlink
NO NO
TDLAOFD-00100202
2CC based
Aggregation
Support of UEfor 2CC
on
LAOFD-070202 From Multiple
Coordinated
Downlink 2CC Carriers
BBUin
LAOFD-070201 /
TDLAOFD-00100111 Category
Carrier 6
Aggregation
Intra-band Carrier for
TDLAOFD-070201 30MHz
CA for Downlink
YES NO None DL
2CC
NoneCoMP
based
Aggregation for 2CC
Introduction
on
LAOFD-070202 From
PackageMultiple
Coordinated
Downlink 2CC Carriers
BBUin
TDLAOFD-00100111
TDLOFD-001136 Carrier Aggregation
Intra-eNodeB
Intra-band
30MHz Carrier for
DL
NO NO TDLAOFD-003001 2CC
CoMP based
in DCS
Aggregation on
forMode
TDLAOFD-003002 Coordinated
Intra-eNodeB
Downlink 2CC BBU
DLin
LBFD-002017 / Intra-band
CoMP Carrier
30MHzin Adaptive
NO NO DRX
Aggregation
Mode for
TDLBFD-002017
Downlink 2CC in
LBFD-002017 / 30MHz
NO NO DRX
TDLBFD-002017
NO NO TDLBFD-002017 DRX
NO NO TDLBFD-002017 DRX
NO NO TDLBFD-002017 DRX
NO NO TDLBFD-002017 DRX
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002026 /
NO NO Uplink Power Control
TDLBFD-002026
LBFD-002026 /
NO NO Uplink Power Control
TDLBFD-002026
LBFD-002026 /
NO NO Uplink Power Control
TDLBFD-002026
LBFD-002026 /
NO NO Uplink Power Control
TDLBFD-002026
Distance based Inter-
YES NO None
LOFD-001072 / None
RAT handover to
TDLOFD-001072 UTRAN
LOFD-001073 / Distance
Distance Based Inter-
based Inter-
NO NO LBFD-00201804
TDLOFD-001073/ frequency Handover
RAT handover to
TDLBFD-00201804
LBFD-00201804 / Distance
GERAN based Inter-
LOFD-001072 /
TDLBFD-00201804 RAT handover
Distance BasedtoInter-
NO NO
TDLOFD-001072 UTRAN
frequency Handover
LOFD-001073 / Distance based Inter-
YES NO TDLOFD-001073
None RAT
Nonehandover to
GERAN
LBFD-002017 /
YES NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
NO NO None None
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
Intra-LTE Load
NO NO TDLOFD-001032
Balancing
PS Inter-RAT Mobility
LOFD-001021 /
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
NO NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
NO NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
NO NO between E-UTRAN
TDLOFD-001021
and CDMA2000
LOFD-001035 / CS Fallback to
NO NO
TDLOFD-001035 CDMA2000 1xRTT
NO NO None None
NO NO None None
NO NO None None
NO NO None None
LBFD-002028 /
NO NO Emergency Call
TDLBFD-002028
LBFD-002028 /
NO NO Emergency Call
TDLBFD-002028
LBFD-002028 /
NO NO Emergency Call
TDLBFD-002028
NO NO None None
PS Inter-RAT Mobility
NO NO LOFD-001019 between E-UTRAN
and UTRAN
Intra-LTE Load
YES NO TDLOFD-001032
Balancing
Intra-LTE Load
NO NO TDLOFD-001032
Balancing
Intra-LTE Load
NO NO TDLOFD-001032
Balancing
NO NO None None
NO NO None
LBFD-00300101 / None
TDLBFD-00300101
Star Topology
LBFD-00300102 /
NO NO LBFD-00300101 / Chain Topology
TDLBFD-00300102
TDLBFD-00300101 Tree Topology
LBFD-00300103 / Star Topology
LBFD-00300102 /
TDLBFD-00300103
NO NO Chain Topology
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
LBFD-002017 /
TDLBFD-00300103
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002032
Extended-QCI
YES NO LOFD-00101502 /
Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502 / Dynamic Scheduling
TDLOFD-00101502 Transport
NO NO
LOFD-00301102 / Differentiated Flow
TDLOFD-00301102 Control
LOFD-00101502 / Dynamic
NO NO LOFD-00101502 / Dynamic Scheduling
Scheduling
TDLOFD-00101502 Transport Overbooking
TDLOFD-00101502
LOFD-00101502 Transport
LOFD-00301101 / Dynamic Scheduling
NO NO TDLOFD-00101502 Differentiated Flow
LOFD-00301102 / Transport
LOFD-00301101 / Control Overbooking
TDLOFD-00301102 Transport Resource
TDLOFD-00301101 Transport
PS Resource
Inter-RAT Mobility
NO NO LOFD-00301103 Overload Control
LOFD-00301103 / Overload
between Control
E-UTRAN
Different Transport
TDLOFD-00301103
LOFD-001019 /
TDLOFD-001015 and UTRAN
Paths based
Enhanced on QoS
Scheduling
NO NO LOFD-003016 / /
TDLOFD-001019
LOFD-00101502 PS Inter-RAT Mobility
Grade
Dynamic Scheduling
TDLOFD-003016
LOFD-001020 /
TDLOFD-00101502 between E-UTRAN
TDLOFD-001020 and GERAN
NO NO LOFD-001021 / PS Inter-RAT Mobility
TDLOFD-001021 between E-UTRAN
LOFD-00101502
TDLOFD-001022 / and CDMA2000
Dynamic Scheduling
NO NO TDLOFD-00101502
TDLOFD-001023 SRVCC to Scheduling
UTRAN
Enhanced
TDLOFD-001015
TDLOFD-001035 SRVCC to GERAN
LOFD-00101502 / CS Fallback to
Dynamic Scheduling
NO NO TDLOFD-00101502 CDMA2000Scheduling
1xRTT
Enhanced
TDLOFD-001015
LBFD-002008 / Radio Bearer
NO NO
TDLBFD-002008 Management
Transport Overbooking
LOFD-00301101
TDLOFD-001015 / Enhanced
NO NO Transport Scheduling
TDLOFD-00301101
TDLOFD-00101502 Dynamic
SRVCC toScheduling
UTRAN
LOFD-001022 / / Differentiated Flow
LOFD-00301102 SRVCC
TDLOFD-001022 Control to GERAN
TDLOFD-00301102 PS Inter-RAT Mobility
NO NO LOFD-001023 / / Transport Resource
LOFD-00301103 between
TDLOFD-001023 OverloadE-UTRAN
Control
TDLOFD-00301103 and UTRAN
LOFD-001019 Different Transport
YES NO LOFD-003016 // PS Inter-RAT Mobility
TDLOFD-001019 Paths based on QoS
TDLOFD-003016 between E-UTRAN
LOFD-001022
LOFD-001020 // Grade
SRVCC to UTRAN
TDLOFD-001022 and GERAN Mobility
PS Inter-RAT
NO NO TDLOFD-001020
LOFD-001019 PS Inter-RAT Mobility
LOFD-001021 // between E-UTRAN
LOFD-001023
TDLOFD-001019/ between
SRVCC
and UTRAN E-UTRAN
to GERAN
TDLOFD-001021
TDLOFD-001023 andInter-RAT
PS CDMA2000 Mobility
NO NO
LOFD-001020 / between E-UTRAN
TDLOFD-001020 SRVCC
and GERANto GERAN
TDLOFD-001023
PS Inter-RAT Mobility
NO NO LOFD-001020 /
between E-UTRAN
TDLOFD-001020
and GERAN
PS Inter-RAT Mobility
between E-UTRAN
NO NO None None
and UTRAN
LOFD-001019 /
PS Inter-RAT Mobility
TDLOFD-001019 PS Inter-RAT Mobility
LOFD-001021 between E-UTRAN
NO NO LOFD-001020 // between E-UTRAN
TDLOFD-001021 and GERAN
TDLOFD-001020 and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
between E-UTRAN
NO NO TDLOFD-001021
and CDMA2000
TDLBFD-00201801
Coverage Based Intra-
TDLOFD-001022
NO NO None frequency
None Handover
TDLOFD-001023
SRVCC to UTRAN
TDLOFD-001033
SRVCC to GERAN
TDLOFD-001034
NO NO None CS
NoneFallback to UTRAN
CS Fallback to
GERAN
NO NO None None
NO NO None None
LOFD-001033 /
NO NO CS Fallback to UTRAN
TDLOFD-001033
LOFD-001033 /
NO NO CS Fallback to UTRAN
TDLOFD-001033
LBFD-002028 /
NO NO Emergency Call
TDLBFD-002028
NO NO None None
YES NO None None
NO NO None None
NO NO None None
Intra-Band Carrier
Aggregation for
Downlink 2CC
Inter-Band Carrier
Aggregation for
Downlink 2CC
LAOFD-00100101
Carrier Aggregation for
LAOFD-00100102
Downlink 2CC in
LAOFD-00100201
NO NO 40MHz
LAOFD-00100202
Support of UE
TDLAOFD-001003
Category 6
NO NO TDLAOFD-001002
None None
Aggregation for
Downlink 2CC in
30MHz
NO NO TDLOFD-001076 CPRI
CarrierCompression
Aggregation for
Downlink 2CC in
YES NO None 40MHz
None
Single Streaming
TDLOFD-001049 Beamforming
NO NO
TDLOFD-001061 Dual Streaming
Beamforming
YES NO None None
Downlink Static Inter-
Cell Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Downlink
Downlink Static
DynamicInter-
LOFD-00101401 Cell Interference
LBFD-00202201 / Inter-Cell Interference
Coordination
Coordination
NO NO TDLBFD-00202201 Downlink
Downlink Static
DynamicInter-
LOFD-00101401 Cell Interference
LBFD-00202201 / Inter-Cell Interference
Coordination
Coordination
NO NO TDLBFD-00202201 Downlink
Downlink Static
DynamicInter-
LOFD-00101401 Cell Interference
LBFD-00202201 / Inter-Cell Interference
Coordination
Coordination
NO NO TDLBFD-00202201 Downlink
Downlink Static
DynamicInter-
LOFD-00101401 Cell Interference
LBFD-00202201 / Inter-Cell Interference
Coordination
Coordination
NO NO TDLBFD-00202201 Downlink
Downlink Static
DynamicInter-
LOFD-00101401 Cell Interference
LBFD-00202201 / Inter-Cell Interference
Coordination
Coordination
NO NO TDLBFD-00202201 Downlink
Downlink Static
DynamicInter-
LOFD-00101401 Cell Interference
LBFD-00202201 / Inter-Cell Interference
Coordination
Coordination
NO NO TDLBFD-00202201 Downlink
Downlink Static
DynamicInter-
LOFD-00101401 Cell Interference
LBFD-00202201 / Inter-Cell Interference
Coordination
Coordination
NO NO TDLBFD-00202201 Downlink
Downlink Static
DynamicInter-
LOFD-00101401 Cell Interference
LBFD-00202201 / Inter-Cell Interference
Coordination
Coordination
NO NO TDLBFD-00202201
Downlink Dynamic
LOFD-00101401
Inter-Cell Interference
LOFD-001040 / Low Power
Coordination
NO NO
TDLOFD-001040 Consumption Mode
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
LBFD-002024 /
NO NO Congestion Control
TDLBFD-002024
LBFD-002024 /
NO NO Congestion Control
TDLBFD-002024
LBFD-002024 /
NO NO Congestion Control
TDLBFD-002024
LBFD-002024 /
NO NO Congestion Control
TDLBFD-002024
LBFD-002024 /
NO NO Congestion Control
TDLBFD-002024
LBFD-002024 /
NO NO Congestion Control
TDLBFD-002024
LBFD-002024 /
NO NO Congestion Control
TDLBFD-002024
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
LBFD-002024 /
NO NO Congestion Control
TDLBFD-002024
LBFD-002024 /
NO NO Congestion Control
TDLBFD-002024
LOFD-00102901 / Radio/transport
NO NO
TDLOFD-00102901 resource pre-emption
LBFD-002023 /
TDLBFD-002023 Admission Control
NO NO
LBFD-002024 / Congestion Control
LBFD-002023 /
TDLBFD-002024
TDLBFD-002023 Admission Control
NO NO
LBFD-002024 / Congestion Control
LBFD-002023 /
TDLBFD-002024
TDLBFD-002023 Admission Control
NO NO
LBFD-002024 / Congestion Control
LBFD-002023 /
TDLBFD-002024
TDLBFD-002023 Admission Control
NO NO
LBFD-002024 / Congestion Control
TDLBFD-002024
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
Basic uplink-downlink
LOFD-001039 / RF Channel
subframe Intelligent
configuration
NO NO
TDLOFD-001039 Shutdown
uplink-downlink
Basic
subframeuplink-downlink
configuration
LOFD-001039 / RF Channel
subframe Intelligent
configuration
NO NO type1&2
TDLOFD-001039 Shutdown
uplink-downlink
uplink-downlink special
LOFD-001039 / subframe
subframe
RF Channel configuration
configuration
Intelligent
NO NO TDLBFD-001007 type1&2
TDLOFD-001039 type 7
Shutdown
TDLBFD-00100701 uplink-downlink
Optional uplink- special
TDLBFD-00100702 subframe configuration
TDLBFD-001007 downlink subframe
NO NO TDLOFD-001026 type 7
TDLBFD-00100701 configuration
TDLOFD-00102601 Optional uplink-
TDLBFD-00100702 uplink-downlink
TDLOFD-00102602 downlink
NO NO TDLOFD-001026 subframesubframe
configuration
TDLOFD-00102603 configuration
TDLOFD-00102601 type 0
uplink-downlink
uplink-downlink special
Intelligent Power-Off of
TDLOFD-00102602
LOFD-001042 /
NO NO subframe
subframe configuration
configuration
Carriers in the Same
TDLOFD-00102603
TDLOFD-001042 type
type 04
Coverage
uplink-downlink
Intelligent special
Power-Off
uplink-downlink of
special
LOFD-001042 / subframeinconfiguration
NO NO Carriers the Same
TDLOFD-001042 type
type 4
Coverage
5
Intelligent Power-Off
uplink-downlink of
special
LOFD-001042 /
NO NO Carriers
subframeinconfiguration
the Same
TDLOFD-001042
Coverage
type 5
Intelligent Power-Off of
LOFD-001042 /
NO NO Carriers in the Same
TDLOFD-001042
Coverage
Intelligent Power-Off of
LOFD-001042 /
NO NO Carriers in the Same
TDLOFD-001042
Coverage
Intelligent Power-Off of
LOFD-001042 /
NO NO Carriers in the Same
TDLOFD-001042
Coverage
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LBFD-002025 /
TDLBFD-002025 Basic Scheduling
NO NO
LOFD-001015 / Enhanced Scheduling
TDLOFD-001015
TDLBFD-002023 Admission Control
NO NO
TDLBFD-002024 Congestion Control
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502 /
Dynamic Scheduling
NO NO TDLOFD-00101502
Enhanced Scheduling
TDLOFD-001015
LOFD-00101502 / Intelligent Power-Off of
NO NO Dynamic Scheduling
TDLOFD-00101502 Carriers in the Same
Coverage of UMTS
LOFD-001074 Intelligent
NO NO Network Power-Off of
MRFD-231901 Carriers in Carrier
the Same
Multi-RAT Joint
Coverage
Intelligent UMTS
of
LOFD-001074
NO NO Network
Shutdown(eNodeB)
MRFD-231901
Multi-RAT Carrier Joint
Intelligent Power-Off of
Intelligentin the Same
Carriers
NO NO LOFD-001074 Shutdown(eNodeB)
Coverage of UMTS
Intelligent
Network Power-Off of
Carriers in the Same
NO NO LOFD-001074
Coverage of UMTS
Network
Intelligent Power-Off of
Carriers in the Same
NO NO LOFD-001074
Coverage of UMTS
Network
NO NO None None
LOFD-001012 / UL Interference
NO NO
TDLOFD-001012 Rejection Combining
High-Mobility-
LOFD-001106 Triggered Idle Mode
NO NO
TDLOFD-00110502 High-Mobility-
Triggered Idle Mode
NO NO LAOFD-002001 Static TDM eICIC
NO NO None None
NO NO None
LOFD-001001 / None
TDLOFD-001001
DL 2x2 MIMO
LOFD-001003 /
NO NO DL 4x2 MIMO
TDLOFD-001003
DL 4X4 MIMO
LOFD-001060 /
LOFD-00101502
TDLOFD-001060 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502/
NO NO Dynamic Scheduling
TDLOFD-00101502
LBFD-002025/
TDLBFD-002025 Basic Scheduling
NO NO
LOFD-00101502/ Dynamic Scheduling
LBFD-002025/
TDLOFD-00101502
TDLBFD-002025 Basic Scheduling
NO NO
LOFD-00101502/ Dynamic Scheduling
TDLOFD-00101502
NO NO None None
Sleeping Cell
NO NO LOFD-002010
Detection
Sleeping Cell
NO NO LOFD-002010
Detection
Sleeping Cell
NO NO LOFD-002010
Detection
YES NO None None
Uplink Static Inter-Cell
Interference
LBFD-00202202 /
Coordination
NO NO TDLBFD-00202202
Uplink Dynamic Inter-
LOFD-00101402
Cell Interference
YES NO None Coordination
None
NO NO None None
NO NO None None
Physical Channel
NO NO TDLBFD-002003
Management
LBFD-002009 /
Broadcast of system
TDLBFD-002009
NO NO information
LBFD-002011 /
LBFD-002009 / Paging
TDLBFD-002011 Broadcast of system
TDLBFD-002009
NO NO information
LBFD-002011 /
Paging
TDLBFD-002011
LBFD-002011 /
NO NO Paging
TDLBFD-002011
LOFD-001006 /
NO NO UL 64QAM
TDLOFD-001006
Physical Channel
LBFD-002003 /
Management
NO NO TDLBFD-002003
PUCCH Flexible
LOFD-001093
Configuration
YES NO None None
CS Fallback to
LOFD-001035 /
CDMA2000 1xRTT
YES NO TDLOFD-001035
Enhanced CS Fallback
TDLOFD-001090 CS Fallback to 1xRTT
LOFD-001035 / to CDMA2000
CDMA2000 1xRTT
YES NO TDLOFD-001035
Enhanced CS Fallback
TDLOFD-001090 CS Fallback to 1xRTT
LOFD-001035 / to CDMA2000
CDMA2000 1xRTT
YES NO TDLOFD-001035
Enhanced CS Fallback
TDLOFD-001090 CS Fallback to 1xRTT
LOFD-001035 / to CDMA2000
CDMA2000 1xRTT
YES NO TDLOFD-001035
Enhanced CS Fallback
TDLOFD-001090 CS Fallback to 1xRTT
LOFD-001035 / to CDMA2000
CDMA2000 1xRTT
YES NO TDLOFD-001035
Enhanced CS Fallback
TDLOFD-001090 CS Fallback to 1xRTT
LOFD-001035 / to CDMA2000
CDMA2000 1xRTT
YES NO TDLOFD-001035
Enhanced CS Fallback
TDLOFD-001090 CS Fallback to 1xRTT
LOFD-001035 / to CDMA2000
CDMA2000 1xRTT
NO NO TDLOFD-001035
Enhanced CS Fallback
TDLOFD-001090 CS Fallback to 1xRTT
LOFD-001035 / to CDMA2000
CDMA2000 1xRTT
NO NO TDLOFD-001035
Enhanced CS Fallback
TDLOFD-001090
to CDMA2000 1xRTT
YES NO None None
PS Inter-RAT Mobility
LOFD-001021 /
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
NO NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
between E-UTRAN
NO NO TDLOFD-001021
and CDMA2000
LOFD-002002 PS Inter-RAT
LOFD-001021 / Inter-RAT ANRMobility
between E-UTRAN
NO NO TDLOFD-001021
and CDMA2000
LOFD-002002
Inter-RAT ANRMobility
PS Inter-RAT
LOFD-001021 /
NO NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
NO NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
NO NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021 /
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
PS Inter-RAT Mobility
LOFD-001021/
YES NO between E-UTRAN
TDLOFD-001021
and CDMA2000
YES NO None CS
NoneFallback to
LOFD-001035 / CDMA2000 1xRTT
TDLOFD-001035 PS Inter-RAT Mobility
YES NO LOFD-001021 / CS Fallback
between to
E-UTRAN
LOFD-001035 /
TDLOFD-001021 CDMA2000
and CDMA2000 1xRTT
TDLOFD-001035
TDLOFD-001090 PS Inter-RAT
Enhanced CS Mobility
Fallback
YES NO LOFD-001021 / CS Fallback
between to 1xRTT
E-UTRAN
to CDMA2000
LOFD-001035 /
TDLOFD-001021 CDMA2000
and CDMA2000 1xRTT
TDLOFD-001035
TDLOFD-001090 PS Inter-RAT
Enhanced CS Mobility
Fallback
NO NO LOFD-001021 / CS Fallback
between to 1xRTT
E-UTRAN
to CDMA2000
LOFD-001035 /
TDLOFD-001021 CDMA2000
and CDMA2000 1xRTT
TDLOFD-001035
TDLOFD-001090 PS Inter-RAT
Enhanced CS Mobility
Fallback
NO NO LOFD-001021 / CS Fallback
between to 1xRTT
E-UTRAN
to CDMA2000
LOFD-001035 /
TDLOFD-001021 CDMA2000
and CDMA2000 1xRTT
TDLOFD-001035
TDLOFD-001090 PS Inter-RAT
Enhanced CS Mobility
Fallback
NO NO LOFD-001021 / CS Fallback
between to 1xRTT
E-UTRAN
to CDMA2000
LOFD-001034 / LOFD-
TDLOFD-001021 GERAN
and CDMA2000
001034
TDLOFD-001090 Flash CS Fallback
Enhanced to
CS Fallback
NO NO LOFD-001053 GERAN
to CDMA2000 1xRTT
LOFD-001020 / PS Inter-RAT Mobility
TDLOFD-001020
LOFD-001023 / between E-UTRAN
NO NO SRVCC
and GERANto GERAN
TDLOFD-001023
LBFD-00201803 / PS
CellInter-RAT
Selection Mobility
and
NO NO between E-UTRAN
TDLBFD-00201803
LOFD-001020 / Reselection
Cell Selection and Re-
and GERAN
selection
TDLOFD-001020
SRVCC to GERAN
PS Inter-RAT Mobility
NO NO TDLOFD-001023
LBFD-00201803 / CS Fallback
between to
E-UTRAN
TDLOFD-001034
TDLBFD-00201803 GERAN
and GERAN Mobility
TDLOFD-001053
LOFD-001020 / PS Inter-RAT
NO NO Flash
ServiceCSbased
Fallback to
Inter-
TDLOFD-001020 between
GERAN E-UTRAN
LOFD-001020 / RAT handover to
TDLOFD-001046 and GERAN
TDLOFD-001020 GERAN to GERAN
TDLOFD-001073 SRVCC
NO NO TDLOFD-001023 Distance based
CS Fallback to Inter-
TDLOFD-001034 RAT handover to
GERAN
TDLOFD-001053 GERAN
Automatic Neighbour
NO NO LOFD-002001 Flash CS Fallback to
Relation
GERAN (ANR)
LBFD-00201804 / Distance Based Inter-
NO NO
TDLBFD-00201804 frequency Handover
Automatic Neighbour
NO NO LOFD-002001
LBFD-00201802 / Coverage Based Inter-
Relation (ANR)
TDLBFD-00201802 frequency
LBFD-00201804 / Distance Based Inter-
NO NO
TDLBFD-00201804 frequency Handover
LBFD-00201805 / Service Based Inter-
LBFD-00201803 /
TDLBFD-00201805 Cell Selection
frequency and Re-
Handover
NO NO Coverage
TDLBFD-00201803
LBFD-00201802 / selection Based Inter-
frequency Handover
TDLBFD-00201802
Distance Based Inter-
NO NO LBFD-00201804 /
frequency Handover
TDLBFD-00201804
Mobility between LTE
TDLOFD-001050 Automatic Neighbour
NO NO LOFD-002001 TDD and LTE FDD
Relation (ANR)
LBFD-00201802 / Coverage Based Inter-
TDLBFD-00201802 frequency Handover
NO NO
LOFD-002001 / Automatic Neighbor
LBFD-00201802
TDLOFD-002001/ Coverage Based Inter-
Relation (ANR)
TDLBFD-00201802 frequency Handover
NO NO
LOFD-002001 / Automatic Neighbour
TDLOFD-002001 Relation (ANR)
Automatic Neighbour
NO NO LOFD-002001
Relation (ANR)
LOFD-002002 /
NO NO Inter-RAT ANR
TDLOFD-002002
LOFD-002002 /
NO NO Inter-RAT ANR
TDLOFD-002002
LOFD-002002 /
NO NO Inter-RAT ANR
TDLOFD-002002
LOFD-002002 /
NO NO Inter-RAT ANR
TDLOFD-002002
LOFD-002002 /
NO NO Inter-RAT ANR
TDLOFD-002002
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
LOFD-003007 / Bidirectional
YES NO
TDLOFD-003007 Forwarding Detection
NO NO None None
LOFD-003007 / Bidirectional
YES NO
TDLOFD-003007 Forwarding Detection
LOFD-003007 / Bidirectional
YES NO
TDLOFD-003007 Forwarding Detection
LOFD-003007 / Bidirectional
YES NO
TDLOFD-003007 Forwarding Detection
LOFD-003007 / Bidirectional
NO NO
TDLOFD-003007 Forwarding Detection
LOFD-003007 / Bidirectional
NO NO
TDLOFD-003007 Forwarding Detection
LOFD-003007 / Bidirectional
NO NO
TDLOFD-003007 Forwarding Detection
LOFD-003007 / Bidirectional
NO NO
TDLOFD-003007 Forwarding Detection
LOFD-003007 / Bidirectional
NO NO
TDLOFD-003007 Forwarding Detection
LOFD-003007 / Bidirectional
NO NO
TDLOFD-003007 Forwarding Detection
NO NO None None
NO NO None None
NO NO None None
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
NO NO None None
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
LOFD-003014 /
YES NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
NO NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
YES NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
NO NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
YES NO Integrated Firewall
TDLOFD-003014
LOFD-00301101 /
NO NO Transport Overbooking
TDLOFD-00301101
NO NO None None
NO NO None None
NO NO None None
LOFD-003009 /
YES NO IPsec
TDLOFD-003009
LOFD-003009 /
YES NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
YES NO IPsec
TDLOFD-003009
LOFD-003009 /
YES NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
NO NO None None
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
YES NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
NO NO None None
NO NO None None
NO NO None None
IP-Based Multi-mode
MRFD-231501 Co-Transmission on
NO NO LOFD-003002 / BS side(eNodeB)
TDLOFD-003002 2G/3G and LTE Co-
transmission
NO NO None None
IP-Based Multi-mode
MRFD-231501 Co-Transmission on
YES NO LOFD-003002 / BS side(eNodeB)
TDLOFD-003002 IP-Based
2G/3G and Multi-mode
LTE Co-
MRFD-231501 Co-Transmission
transmission on
YES NO LOFD-003002 / BS side(eNodeB)
TDLOFD-003002 2G/3G and LTE Co-
LOFD-003014 / transmission
NO NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
NO NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
NO NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
NO NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
NO NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
NO NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
NO NO Integrated Firewall
TDLOFD-003014
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
LOFD-00301201 / IP Performance
YES NO
TDLOFD-00301201 Monitoring
LOFD-00301201 / IP Performance
YES NO
TDLOFD-00301201 Monitoring
LOFD-00301201 / IP Performance
YES NO
TDLOFD-00301201 Monitoring
LOFD-00301201 / IP Performance
YES NO
TDLOFD-00301201 Monitoring
LOFD-00301201 / IP Performance
NO NO
TDLOFD-00301201 Monitoring
LOFD-00301201 / IP Performance
NO NO
TDLOFD-00301201 Monitoring
LOFD-00301201 / IP Performance
NO NO
TDLOFD-00301201 Monitoring
LOFD-00301201 / IP Performance
YES NO
TDLOFD-00301201 Monitoring
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
LOFD-003009 /
YES NO IPsec
TDLOFD-003009
LOFD-003009 /
YES NO IPsec
TDLOFD-003009
LOFD-003009 /
YES NO IPsec
TDLOFD-003009
LOFD-003009 /
YES NO IPsec
TDLOFD-003009
LOFD-003009 /
YES NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LOFD-003009 /
NO NO IPsec
TDLOFD-003009
LBFD-00300403 /
YES NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
YES NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
YES NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
ML-PPP/MC-PPP
TDLBFD-00300403
NO NO IP Header
LBFD-00300401 /
LBFD-00300403 / Compression
TDLBFD-00300401 ML-PPP/MC-PPP
TDLBFD-00300403
NO NO IP Header
LBFD-00300401 /
Compression
TDLBFD-00300401
YES NO None None
LBFD-00300403 /
YES NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
YES NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
NO NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
YES NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
YES NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-00300403 /
YES NO ML-PPP/MC-PPP
TDLBFD-00300403
LBFD-004002 / Centralized U2000
YES NO TDLBFD-004002 Management
LOFD-003005 OM Channel Backup
LBFD-004002 / Centralized U2000
YES NO TDLBFD-004002 Management
LOFD-003005 OM Channel Backup
LBFD-004002 / Centralized U2000
YES NO TDLBFD-004002 Management
LOFD-003005 OM Channel Backup
LBFD-004002 / Centralized U2000
YES NO TDLBFD-004002 Management
LOFD-003005 OM Channel Backup
LBFD-004002 / Centralized U2000
YES NO TDLBFD-004002 Management
LOFD-003005 OM Channel Backup
LBFD-004002 / Centralized U2000
NO NO TDLBFD-004002 Management
LOFD-003005 OM Channel Backup
LBFD-004002 / Centralized U2000
NO NO TDLBFD-004002 Management
LOFD-003005 OM Channel Backup
NO NO None None
NO NO None None
LOFD-003014 /
YES NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
NO NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
YES NO Integrated Firewall
TDLOFD-003014
LOFD-003014 /
NO NO Integrated Firewall
TDLOFD-003014
NO NO None None
Compression &
LBFD-003004 /
YES NO Multiplexing over
TDLBFD-003004
E1/T1
NO NO None None
Compression &
LBFD-003004 /
YES NO Multiplexing over
TDLBFD-003004
E1/T1
Compression &
LBFD-003004 /
YES NO Multiplexing over
TDLBFD-003004
E1/T1
Compression &
LBFD-003004 /
YES NO Multiplexing over
TDLBFD-003004
E1/T1
Compression &
LBFD-003004 /
NO NO Multiplexing over
TDLBFD-003004
E1/T1
Compression &
LBFD-003004 /
NO NO Multiplexing over
TDLBFD-003004
E1/T1
Compression &
LBFD-003004 /
NO NO Multiplexing over
TDLBFD-003004 Compression &
LBFD-003004 / E1/T1
Multiplexing over
TDLBFD-003004
NO NO E1/T1
LBFD-00300401 / Compression &
LBFD-003004 / IP Header
TDLBFD-00300401 Multiplexing
TDLBFD-003004 Compressionover
NO NO E1/T1
LBFD-00300401 /
IP Header
TDLBFD-00300401
Compression
YES NO None None
Enhanced
LOFD-003011 /
YES NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
NO NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
YES NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
YES NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
NO NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
NO NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
NO NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
YES NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
YES NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
YES NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
YES NO Transmission QoS
TDLOFD-003011
Management
Enhanced
LOFD-003011 /
YES NO Transmission QoS
TDLOFD-003011
Management
NO NO None None
NO NO None None
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
TDLOFD-003009
LOFD-002004 /
NO NO Self-configuration
TDLOFD-002004
LOFD-002004 /
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
TDLOFD-003009
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
NO NO Self-configuration
TDLOFD-002004
LBFD-00202103 /
YES NO SCTP Multi-homing
TDLBFD-00202103
NO NO None None
NO NO None None
LBFD-00202103 /
YES NO SCTP Multi-homing
TDLBFD-00202103
LBFD-00202103 /
NO NO SCTP Multi-homing
TDLBFD-00202103
LBFD-00202103 /
YES NO SCTP Multi-homing
TDLBFD-00202103
LBFD-00202103 /
YES NO SCTP Multi-homing
TDLBFD-00202103
LBFD-00202103 /
NO NO SCTP Multi-homing
TDLBFD-00202103
LBFD-00202103 /
YES NO SCTP Multi-homing
TDLBFD-00202103
LBFD-00202103 /
NO NO SCTP Multi-homing
TDLBFD-00202103
LBFD-00202103 /
NO NO SCTP Multi-homing
TDLBFD-00202103
LBFD-00202103 /
NO NO SCTP Multi-homing
TDLBFD-00202103
NO NO None None
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
NO NO None None
LOFD-002004 /
NO NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
TDLOFD-003009
LOFD-002004 /
NO NO Self-configuration
TDLOFD-002004
LOFD-002004 /
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
TDLOFD-003009
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LOFD-002004 /
NO NO Self-configuration
TDLOFD-002004
LOFD-002004 /
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
TDLOFD-003009
LOFD-002004 /
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
TDLOFD-003009
LBFD-003003 / VLAN Support (IEEE
YES NO
TDLBFD-003003 802.1p/q)
LBFD-003003 / VLAN Support (IEEE
YES NO
TDLBFD-003003 802.1p/q)
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
NO NO None None
LOFD-002004 /
NO NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LBFD-003006 /
TDLBFD-003006 IPv4/IPv6 Dual Stack
YES NO
LOFD-002004 / Self-configuration
LOFD-002004 /
TDLOFD-002004
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
TDLOFD-003009
LOFD-002004 /
NO NO Self-configuration
TDLOFD-002004
NO NO None None
LOFD-002004 /
NO NO Self-configuration
TDLOFD-002004
LOFD-002004 /
YES NO Self-configuration
TDLOFD-002004
LBFD-003006 /
TDLBFD-003006 IPv4/IPv6 Dual Stack
YES NO
LOFD-002004 / Self-configuration
LOFD-002004 /
TDLOFD-002004
TDLOFD-002004 Self-configuration
NO NO
LOFD-003009 / Ipsec
LOFD-002004 /
TDLOFD-003009
TDLOFD-002004 Self-configuration
YES NO
LOFD-003009 / Ipsec
TDLOFD-003009
LOFD-002004 /
NO NO Self-configuration
TDLOFD-002004
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
Synchronization with
NO NO None Ethernet
None (ITU-T
G.8261)
LOFD-00301301 Synchronization with
IEEE1588 V2 Clock
LOFD-00301302 Ethernet (ITU-T
YES NO Synchronization
LOFD-00301303 G.8261)
LOFD-00301301 Clock over IP (Huawei
LOFD-003023 IEEE1588
LOFD-00301302 proprietary)V2 Clock
NO NO Synchronization
IEEE 1588v2 over
LOFD-00301303
Clock
IPv6 over IP (Huawei
LOFD-003023
proprietary)
NO NO None None
IEEE 1588v2 over
IPv6
NO NO None None
Synchronization with
NO NO None Ethernet
None (ITU-T
G.8261)
LOFD-00301301 Synchronization with
IEEE1588 V2 Clock
LOFD-00301302 Ethernet (ITU-T
NO NO Synchronization
LOFD-00301303 G.8261)
LOFD-00301301 Clock over IP (Huawei
LOFD-003023 Synchronization
IEEE1588 with
LOFD-00301302 proprietary)V2 Clock
NO NO Ethernet (ITU-T
Synchronization
IEEE 1588v2 over
LOFD-00301303 G.8261)
LOFD-00301301 Clock
IPv6 over IP (Huawei
LOFD-003023 IEEE1588
LOFD-00301302 proprietary)V2 Clock
NO NO Synchronization
IEEE 1588v2 over
LOFD-00301303
Clock
IPv6 over IP (Huawei
LOFD-003023
proprietary)
IEEE 1588v2 over
IPv6
Synchronization with
Ethernet (ITU-T
G.8261)
LOFD-00301301 Synchronization with
IEEE1588 V2 Clock
LOFD-00301302 Ethernet (ITU-T
NO NO Synchronization
LOFD-00301303 G.8261)
LOFD-00301301 Clock over IP (Huawei
LOFD-003023 IEEE1588
LOFD-00301302 proprietary)V2 Clock
NO NO Synchronization
IEEE 1588v2 over
LOFD-00301303
Clock
IPv6 over IP (Huawei
LOFD-003023
proprietary)
YES NO None None
IEEE 1588v2 over
IPv6
YES NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
Intra-LTE User
NO NO TDLOFD-070215 Number Load
Balancing
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
RAN Sharing with
NO NO None Common
None Carrier
LOFD-001036 RAN Sharing with
LOFD-001037 RAN Sharing
Dedicated with
Carrier
LOFD-001036 /
YES NO LOFD-001086 Common Carrier
RAN Sharing by More
TDLOFD-001036
TDLOFD-001112 RAN Sharing with
Operators
LOFD-001037 / RAN Sharing with
LOFD-070206
LOFD-001036 / Dedicated
MOCN Carrier
Flexible Priority
TDLOFD-001037 Common Carrier
YES NO TDLOFD-001036 RAN
BasedSharing
Campingby More
LOFD-001086 / RAN Sharing with
LOFD-001037 / Operators
Hybrid RAN Sharing
TDLOFD-001086 RAN Sharing
Dedicated with
Carrier
LOFD-001036
TDLOFD-001037/ MOCN Flexible Priority
YES NO TDLOFD-001112 Common
RAN Carrier
Sharing by More
TDLOFD-001036
LOFD-001086 Based Camping
LOFD-070206 / RAN Sharing
Operators with
LOFD-001037
TDLOFD-001086/ Hybrid
RAN RAN Sharing
Sharing with
LOFD-001036 / Dedicated
MOCN Carrier
Flexible Priority
TDLOFD-001037
TDLOFD-001112 Common Carrier
YES NO TDLOFD-001036 RAN Sharing
Based Camping by More
LOFD-001086
LOFD-070206 / RAN
LOFD-001037
TDLOFD-001086/ HybridSharing
Operators with
RAN Sharing
Dedicated Carrier
MOCN Flexible Priority
TDLOFD-001037
TDLOFD-001112
YES NO RAN
BasedSharing
Campingby More
LOFD-001086
LOFD-070206 / Operators
Hybrid RAN Sharing
TDLOFD-001086
MOCN Flexible Priority
YES NO TDLOFD-001112
None None
Based Camping
LOFD-070206
LOFD-001036 / Hybrid RAN Sharing
RAN Sharing with
TDLOFD-001036 Common Carrier
YES NO
LOFD-001037
LOFD-001036 // RAN
RAN Sharing
Sharing with
with
TDLOFD-001037
TDLOFD-001036 Dedicated Carrier
Common Carrier
YES NO LOFD-001037 / RAN Sharing with
LOFD-001036
TDLOFD-001037/ RAN Sharing
Dedicated with
Carrier
TDLOFD-001036
LOFD-070206 Common Carrier
Hybrid RAN Sharing
YES NO LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier
LOFD-070206 Hybrid RAN Sharing
LOFD-001036 / RAN Sharing with
TDLOFD-001036 Common Carrier
YES NO LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier
LOFD-070206 Hybrid RAN Sharing
YES NO LOFD-070206 Hybrid RAN Sharing
NO NO None None
LBFD-002025 /
TDLBFD-002025 Basic Scheduling
NO NO
LOFD-00101502 / Dynamic Scheduling
TDLOFD-00101502
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
LBFD-002011 /
NO NO Paging
TDLBFD-002011
LOFD-001018 /
NO NO S1-Flex
TLOFD-001018
NO NO None None
LBFD-00300101 /
YES NO None
TDLBFD-00300101 None
LBFD-00300102 / Star Topology
LBFD-00300101 /
TDLBFD-00300102 Chain Topology
YES NO TDLBFD-00300101
LBFD-00300103 / Tree Topology
LBFD-00300102 /
TDLBFD-00300103 Star Topology
S1-flex
LBFD-00300101
LOFD-001018 / /
TDLBFD-00300102 Chain Topology
YES NO TDLBFD-00300101
LBFD-00300103
TDLOFD-001018/ Tree Topology
LBFD-00300102 /
TDLBFD-00300103 Star Topology
S1-flex
LBFD-00300101
LOFD-001018 / /
TDLBFD-00300102 Chain Topology
YES NO TDLBFD-00300101
LBFD-00300103
TDLOFD-001018/ Tree Topology
LBFD-00300102 /
TDLBFD-00300103 Star Topology
S1-flex
LBFD-00300101
LOFD-001018 / /
TDLBFD-00300102 Chain Topology
YES NO TDLBFD-00300101
LBFD-00300103
TDLOFD-001018/ Tree Topology
LBFD-00300102 /
TDLBFD-00300103 Star Topology
S1-flex
LBFD-00300101
LOFD-001018 / /
TDLBFD-00300102 Chain Topology
YES NO TDLBFD-00300101
LBFD-00300103
TDLOFD-001018/ Tree Topology
LBFD-00300102 /
TDLBFD-00300103 Star Topology
S1-flex
LBFD-00300101
LOFD-001018 / /
TDLBFD-00300102 Chain Topology
YES NO TDLBFD-00300101
LBFD-00300103
TDLOFD-001018/ Tree Topology
LBFD-00300102 /
TDLBFD-00300103 Star Topology
S1-flex
LBFD-00300101
LOFD-001018 / /
TDLBFD-00300102 Chain Topology
YES NO TDLBFD-00300101
LBFD-00300103
TDLOFD-001018/ Tree Topology
LBFD-00300102 /
TDLBFD-00300103 Star Topology
S1-flex
TDLBFD-00300102
LOFD-001018 / Chain Topology
YES NO
LBFD-00300103
TDLOFD-001018/ Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018
LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
NO NO LBFD-00300101 / Chain Topology
TDLBFD-00300102
TDLBFD-00300101 Tree Topology
LBFD-00300103 / Star Topology
LBFD-00300101
LBFD-00300102
TDLBFD-00300103//
NO NO TDLBFD-00300101 Chain Topology
TDLBFD-00300102
LBFD-00300102 Tree Topology
LBFD-00300103 / Star Topology
LBFD-00300101
TDLBFD-00300102
TDLBFD-00300103 / Chain Topology
NO NO TDLBFD-00300101
LBFD-00300103 / Tree Topology
LBFD-00300102
TDLBFD-00300103 / Star Topology
S1-flex
TDLBFD-00300102
LOFD-001018 / Chain Topology
NO NO
LBFD-00300103
TDLOFD-001018/ Tree Topology
TDLBFD-00300103 S1-flex
LBFD-00300101
LOFD-001018 / /
NO NO LOFD-070206
TDLBFD-00300101 Hybrid RAN Sharing
TDLOFD-001018
LBFD-00300102 / Star Topology
LBFD-00300101
TDLBFD-00300102 / Chain Topology
YES NO TDLBFD-00300101
LBFD-00300103 / Tree Topology
LBFD-00300102
TDLBFD-00300103
LBFD-00300101 // Star Topology
S1-flex
TDLBFD-00300102
LOFD-001018 /
TDLBFD-00300101 Chain Topology
YES NO
LBFD-00300103
LBFD-00300102 //
TDLOFD-001018 Tree Topology
Star Topology
TDLBFD-00300103
TDLBFD-00300102 S1-flex
Chain Topology
YES NO LOFD-001018 / /
LBFD-00300103 Tree Topology
LBFD-00300101
TDLOFD-001018 /
TDLBFD-00300103
TDLBFD-00300101 S1-flex
LOFD-001018 / //
LBFD-00300101 Star Topology
Hybrid RAN Sharing
LBFD-00300102
NO NO TDLOFD-001018
TDLBFD-00300101 Chain Topology
TDLBFD-00300102
LOFD-070206
LBFD-00300102 Tree Topology
LBFD-00300103 // Star Topology
LBFD-00300101
TDLBFD-00300102
TDLBFD-00300103 / Chain Topology
NO NO TDLBFD-00300101
LBFD-00300103 / Tree Topology
LBFD-00300102
TDLBFD-00300103 / Star Topology
S1-flex
TDLBFD-00300102
LOFD-001018 / Chain Topology
NO NO
LBFD-00300103
TDLOFD-001018/ Tree Topology
TDLBFD-00300103 S1-flex
NO NO LOFD-001018
LOFD-070206 / Hybrid RAN Sharing
TDLOFD-001018
NO NO None
LBFD-00300101 / None
TDLBFD-00300101
Star Topology
LBFD-00300102 /
YES NO LBFD-00300101 / Chain Topology
TDLBFD-00300102
TDLBFD-00300101 Tree Topology
LBFD-00300103 / Star Topology
LBFD-00300102 /
TDLBFD-00300103
YES NO LBFD-00300101 / Chain Topology
TDLBFD-00300102
TDLBFD-00300101 Tree Topology
LBFD-00300103 / Star Topology
LBFD-00300102 /
TDLBFD-00300103
YES NO LBFD-00300101 / Chain Topology
TDLBFD-00300102
TDLBFD-00300101 Tree Topology
LBFD-00300103 / Star Topology
LBFD-00300102 /
TDLBFD-00300103
YES NO LBFD-00300101 / Chain Topology
TDLBFD-00300102
TDLBFD-00300101 Tree Topology
LBFD-00300103 / Star Topology
LBFD-00300102 /
TDLBFD-00300103
NO NO Chain Topology
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
NO NO TDLBFD-00300103
None None
LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
NO NO Chain Topology
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
NO NO TDLBFD-00300103
LOFD-070206 Hybrid RAN Sharing
YES NO None None
NO NO None
LBFD-00300101 / None
TDLBFD-00300101
Star Topology
LBFD-00300102 /
YES NO LBFD-00300101 / Chain Topology
TDLBFD-00300102
TDLBFD-00300101 Tree Topology
LBFD-00300103 / Star Topology
LBFD-00300102
TDLBFD-00300103
LBFD-00300101 //
YES NO Chain Topology
TDLBFD-00300102
TDLBFD-00300101 Tree Topology
Star Topology
LBFD-00300103
LBFD-00300102 //
TDLBFD-00300103 Chain Topology
YES NO TDLBFD-00300102
LBFD-00300101 / Tree Topology
LBFD-00300103
TDLBFD-00300101 /
Hybrid RAN Sharing
Star Topology
TDLBFD-00300103
LBFD-00300102 /
NO NO LOFD-070206 Chain Topology
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
NO NO TDLBFD-00300103
LOFD-070206 Hybrid RAN Sharing
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LBFD-002017 /
NO NO DRX
TDLBFD-002017
LOFD-001105 /
NO NO Dynamic DRX
TDLOFD-001105
LOFD-001105 /
NO NO Dynamic DRX
TDLOFD-001105
NO NO None None
NO NO None None
SFN
NO NO LOFD-003029
LOFD-001051 / Compact Bandwidth
Adaptive SFN/SDMA
TDLOFD-001075
Inter-BBP
SFN SFN
TDLOFD-002008
LOFD-003029 / Inter-BBU SFN
Adaptive SFN/SDMA
NO NO TDLOFD-001098
TDLOFD-001075 Inter-BBP
Inter-BBP Adaptive
SFN
TDLOFD-001080
TDLOFD-001075 SFN/SDMA
Inter-BBP SFN
TDLOFD-001081
TDLOFD-002008
NO NO Inter-BBU
Inter-BBU Adaptive
SFN
TDLOFD-001082
TDLOFD-001098 SFN/SDMA
Inter-BBP Adaptive
TDLOFD-001080
SFN/SDMA
NO NO TDLOFD-001081
None None
Inter-BBU Adaptive
TDLOFD-001082
SFN/SDMA
YES NO None None
NO NO None None
NO NO None None
Inter-BBU SFN
TDLOFD-001080
YES NO Inter-BBU Adaptive
TDLOFD-001082
SFN/SDMA
Inter-BBU SFN
TDLOFD-001080
NO NO Inter-BBU Adaptive
TDLOFD-001082
SFN/SDMA
YES NO None None
eMBMS Phase 1
LOFD-070220 /
NO NO based on Centralized
TDLOFD-070220
MCE Architecture
NO NO None None
LBFD-002023 /
NO NO Admission Control
TDLBFD-002023
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
NO NO None None
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502 /
TDLOFD-00101502 Enhanced Scheduling
NO NO
LBFD-002025 / Basic Scheduling
TDLBFD-002025
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-002015 /
NO NO RACH Optimization
TDLOFD-002015
Adaptive Power
NO NO LOFD-001025
LBFD-002023 / Consumption
Admission Control
TDLBFD-002023
LOFD-001032 Congestion Control
NO NO LBFD-002024 // Intra-LTE
TDLOFD-001032 Radio/transport
TDLBFD-002024 Load Balancing
LOFD-001044 / resource pre-emption
LOFD-00102901 Inter-RAT Load
NO NO TDLOFD-001044
LBFD-002003 / Physical Channel
Sharing to UTRAN
LOFD-001045
TDLBFD-002003 / Management
Inter-RAT Load
TDLOFD-001045
LBFD-002009 / Broadcast
NO NO Sharing to of system
GERAN
LOFD-001057
TDLBFD-002009 information
LOFD-001016
LBFD-002009 ///
LBFD-002016
TDLOFD-001016 Dynamic
Broadcast
VoIP Downlink
of system
Semi-persistent
TDLBFD-002009
TDLBFD-002016 Power Allocation
NO NO LOFD-00101502 information
LBFD-002026 / / Scheduling
TDLOFD-00101502 Uplink
Single Power
Dynamic Control
Scheduling
Streaming
TDLBFD-002026
LOFD-001109
TDLOFD-001049 / DL Non-GBR Packet
Beamforming
NO NO TDLOFD-001109 Bundling
TDLOFD-001061 Dual Streaming
LOFD-001070 VoIP Semi-persistent
LOFD-001016 // Symbol Power Saving
Beamforming
TDLOFD-001070 Scheduling
Scheduling Based on
NO NO TDLOFD-001016
TDLOFD-070224 TTI
MaxBundling
Bit Rate
LOFD-001048 /
LBFD-002025 / Dynamic Scheduling
Basic Scheduling
TDLOFD-001048
TDLBFD-002025 Basic
Paging
NO NO LOFD-00101502 /
TDLBFD-002011 SchedulingTDLOFD-
Support of aperiodic
RAN Sharing with
TDLOFD-00101502
LOFD-001036
LBFD-002031
TDLBFD-002025// 070224:Scheduling
CQI reports
Common Carrier
TDLOFD-001036
TDLBFD-002031 Based
MBR>GBR on Max Bit Rate
NO NO LBFD-070102 / MOCN Flexible Priority
TDLOFD-001112
LBFD-070102 / MBR>GBR
Configuration
TDLBFD-070102 Based Camping
LOFD-070206
TDLBFD-070102 Configuration
Hybrid RAN Sharing
NO NO None None
MU-Beamforming
Distance Based Inter-
TDLOFD-001077
NO NO LBFD-00201804 3GPP R8 Handover
TDLBFD-001001 / frequency
TDLBFD-00201804 Specifications
Distance based Inter-
LOFD-001072 / RAT handover to
NO NO
TDLOFD-001072 UTRAN
LBFD-002009
LOFD-001073 // Distance
Broadcastbased Inter-
of system
TDLBFD-002009
TDLOFD-001073 RAT handover to
NO NO information
LOFD-0700206 / GERAN AC Barring
Dynamic
TLOFD-0700206
LOFD-001066 / Intra-eNodeB UL
NO NO
TDLOFD-001066 CoMP
NO NO None None
NO NO None None
LOFD-001094 /
NO NO Control Channel IRC
TDLOFD-001094 DRX, LOFD-
00110501/TDLOFD-
LBFD-002017/
NO NO 00110501:Dynamic
TDLBFD-002017
DRX, TDLBFD-
GSM and LTE DRX
070112:Smart Buffer
NO NO MRFD-231808 Zone
Optimization(LTE)
GSM and LTE
NO NO MRFD-231806 Dynamic Power
Sharing(LTE)
NO NO None None
LOFD-001032 / Intra-LTE Load
TDLOFD-001032 Balancing
LOFD-001044 / TD Inter-RAT Load
NO NO
LOFD-001044 Sharing to UTRAN
LOFD-001045 // Intra-eNodeB
Inter-RAT LoadUL
LOFD-001066
TDLOFD-001045 CoMP
Sharing to GERAN
NO NO TDLOFD-001066
Intra-eNodeB UL
LOFD-070222
CoMP
GSM andPhase
LTEIIFDD
NO NO MRFD-090202 Dynamic Spectrum
Sharing(LTE FDD)
LOFD-001012 / UL Interference
NO NO
TDLOFD-001012 Rejection Combining
Control Channel
LOFD-001094/
NO NO IRC/Control Channel
TDLOFD-001094
IRC
NO NO None None
NO NO None None
Dynamic Downlink
NO NO LBFD-002016
LBFD-00201802 / Coverage Based Inter-
Power Allocation
TDLBFD-00201802 frequency Handover
LBFD-00201804 / Distance Based Inter-
NO NO
TDLBFD-00201804 frequency Handover
LBFD-00201805 / Service Based Inter-
LBFD-00201802
TDLBFD-00201805 / Coverage
frequency Based Inter-
Handover
NO NO
TDLBFD-00201802 frequency Handover
LOFD-00101502 /
TDLOFD-00101502 Enhanced Scheduling
NO NO
LBFD-002025 / Basic Scheduling
TDLBFD-002025
Intra-Band Carrier
YES NO None None
Aggregation for
LBFD-002025 / Downlink 2CC in
Basic
20MHzScheduling
TDLBFD-002025
NO NO Enhanced Scheduling
TDLOFD-001015 Inter-Band Carrier
LAOFD-00100101 Dynamic Scheduling
TDLOFD-00101502 Aggregation for
LAOFD-00100102
NO NO None Downlink
None 2CC in
LAOFD-00100201 /
20MHz
TDLAOFD-00100201
Carrier Aggregation for
LAOFD-00100202 /
NO NO None Downlink
None 2CC in
TDLAOFD-00100102
Intra-Band
40MHz Carrier
LAOFD-070201 / Aggregation for
Support of UE
TDLAOFD-070201 Downlink
NO NO Category 2CC
6 in
LAOFD-070202 20MHz
LBFD-002025/ CA for Downlink 2CC
TDLAOFD-00100111 Inter-Band Carrier
LBFD-002025
TDLBFD-002025// From
Basic Multiple Carriers
Scheduling
NO NO LOFD-001015
LAOFD-00100101 / Aggregation for
TDLBFD-002025
LOFD-00101502/ Carrier Aggregation
Dynamic Scheduling for
TDLOFD-001015
TDLAOFD-00100101 Downlink 2CC
LOFD-00101502
TDLOFD-00101502 // 2CC
Basicbased on in
Scheduling
LOFD-00101501
LAOFD-00100102 / 20MHz
TDLOFD-00101502 Coordinated BBU
Dynamic Scheduling
NO NO TDLOFD-00101501
TDLAOFD-00100102 Carrier
LOFD-001060
LOFD-00101502 / DL 4X4Aggregation
Intra-band Carrier for
MIMO
LAOFD-00100201/ /
TDLOFD-001060 Downlink 2CC
Aggregation
DL 2X2 MIMO forin
TDLOFD-00101502
TDLAOFD-00100201 40MHz
NO NO LOFD-001001 / Downlink 2CC in
LAOFD-00100202
TDLOFD-001001 / Support
30MHz of UE
LOFD-00101501
TDLAOFD-00100102 / Category
Enhanced6Scheduling
TDLOFD-00101501
LAOFD-070201 / CQI
CA Adjustment
CQIfor Downlink 2CC
Adjustment
NO NO
LOFD-00101502
TDLAOFD-070201 / Dynamic
From Scheduling
Multiple
Dynamic Carriers
Scheduling
TDLOFD-00101502
LAOFD-070202 Carrier Aggregation for
TDLAOFD-00100111 2CC based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
NO NO TDLOFD-001001 DL 2X2 MIMO
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
NO NO None None
LOFD-00101502 /
TDLOFD-00101502 Enhanced Scheduling
NO NO
LBFD-002025 / Basic Scheduling
LBFD-002011/
TDLBFD-002025
TDLBFD-002011 Paging Random
NO NO
LBFD-002010/TDLBF Access Procedure
D-002010
YES NO None None
Inter-RAT Load
NO NO TDLOFD-001044
Sharing to UTRAN
Physical Channel
NO NO TDLBFD-002003
Management
YES NO None
LBFD-002009 / None
Broadcast of system
TDLBFD-002009
information
LBFD-002010 /
NO NO Random Access
TDLBFD-002010
Procedure
LBFD-002026 /
Uplink Power Control
TDLBFD-002026
LBFD-002009 /
Broadcast of system
TDLBFD-002009
information
LBFD-002010 /
NO NO Random Access
TDLBFD-002010
LBFD-002009 Procedure
LBFD-002026 // Broadcast of system
TDLBFD-002009 Uplink Power Control
information
NO NO TDLBFD-002026
LBFD-002010 / Random Access
LBFD-002009
TDLBFD-002010/ Broadcast
Procedure of system
TDLBFD-002009 information
NO NO
LBFD-002010 / Random Access
LBFD-002009
TDLBFD-002010/ Procedure
Broadcast of system
TDLBFD-002009
NO NO LBFD-002009 information
LOFD-002015 // Broadcast of system
TDLBFD-002009 RACH Optimization
TDLOFD-002015 information
LBFD-002010 /
NO NO Random Access
TDLBFD-002010
LBFD-002009 Procedure of system
LOFD-002015 // Broadcast
TDLBFD-002009 RACH Optimization
information
NO NO TDLOFD-002015
LBFD-002010 / Random Access
LBFD-002009
TDLBFD-002010/ Broadcast
Procedure of system
TDLBFD-002009 information
NO NO
LBFD-002010 / Random Access
LBFD-002009
TDLBFD-002010/ Broadcast
Procedure of system
TDLBFD-002009 information
NO NO
LBFD-002010 / Random Access
TDLBFD-002010 Procedure
Physical Channel
NO NO LBFD-002003
Management
LBFD-002011 /
NO NO Paging
TDLBFD-002011
PS Inter-RAT Mobility
LOFD-001020 /
YES NO between E-UTRAN
TDLOFD-001020
and GERAN
PS Inter-RAT
SRVCC Mobility
to GERAN
LOFD-001020 /
YES NO LOFD-001023 / between E-UTRAN
Flash CS Fallback to
TDLOFD-001020
TDLOFD-001023 and GERAN
GERAN
LOFD-001053 CS Fallback with LAI
YES NO
LOFD-001069 to GERAN
LOFD-001020/ PS Inter-RAT Mobility
TDLOFD-001020 between E-UTRAN
and GERAN
PS Inter-RAT Mobility
LOFD-001020 /
YES NO between E-UTRAN
TDLOFD-001020
and GERAN
PS Inter-RAT Mobility
LOFD-001020 /
NO NO between E-UTRAN
TDLOFD-001020
and GERAN
Multi-RAT Carrier Joint
NO NO MRFD-231901 Intelligent
Shutdown(eNodeB)
Automatic Neighbour
NO NO LOFD-002001
Relation (ANR)
LBFD-00201801 / Coverage Based Intra-
TDLBFD-00201801 frequency Handover
NO NO
LOFD-002001 / Automatic Neighbour
LBFD-00201801
TDLOFD-002001/ Coverage Based Intra-
Relation (ANR)
TDLBFD-00201801 frequency Handover
NO NO
LOFD-002001 / Automatic Neighbour
TDLOFD-002001/ Coverage Based Inter-
Relation (ANR)
LBFD-00201802
frequency Handover
YES NO TDLBFD-00201802
None None
Cell Selection and Re-
LBFD-00201803 / Coverage
LBFD-00201802 / selection Based Inter-
TDLBFD-00201803 frequency Handover
TDLBFD-00201802 Distance Based Inter-
YES NO LBFD-00201804 / Cell Selection and Re-
LBFD-00201803 / frequency Handover
TDLBFD-00201804 Coverage
selection Based Inter-
LBFD-00201802 Service Based Inter-
LBFD-00201805 //
TDLBFD-00201803 frequency
Distance Handover
Based Inter-
NO NO TDLBFD-00201802
LBFD-00201804 / frequency Handover
TDLBFD-00201805 Cell Selection
frequency andLTE
Handover Re-
LBFD-00201803 Mobility between
TDLOFD-001050/
TDLBFD-00201804 selection
Service
TDLBFD-00201803
LBFD-00201805 / TDD andBased Inter-
LTE FDD
Distance
frequencyBased Inter-
Handover
NO NO LBFD-00201804
TDLBFD-00201805
LBFD-00201802 // Coverage Based Inter-
frequency Handover
Mobility between LTE
TDLBFD-00201804
TDLOFD-001050
TDLBFD-00201802 frequency Handover
Service
TDD andBased Inter-
LTE FDD
LBFD-00201805
LBFD-00201804 // Distance
YES NO frequencyBased Inter-
Handover
TDLBFD-00201805
TDLBFD-00201804 frequency Handover
Mobility between LTE
TDLOFD-001050/
LBFD-00201805 Service
TDD andBased Inter-
LTE FDD
LBFD-00201803
TDLBFD-00201805 / Cell Selection
frequency and
Handover
NO NO
TDLBFD-00201803 Reselection
NO NO None None
LBFD-00201802 / Coverage
Coverage Based
Based Inter-
Inter-
YES NO LBFD-00201802
TDLBFD-00201802 frequency
frequency Handover
Handover
LBFD-00201804 / Distance
RAN SharingBased
withInter-
TDLBFD-00201804 frequency Handover
Common Carrier
NO NO
LBFD-00201805 / Service
RAN Basedwith
Sharing Inter-
LOFD-002001 /
TDLBFD-00201805 Automatic
RAN
frequency
Dedicated Neighbour
Sharing with
Handover
Carrier
LOFD-001036
TDLOFD-002001
LOFD-002012 / Relation
Common (ANR)
Cell OutageCarrier
Detection
NO NO Coverage Based Intra-
LOFD-001037
LOFD-002012 /
TDLOFD-002012 Cell
RAN
and Outage
SharingDetection
with
Compensation
LOFD-001036 / frequency Handover
TDLBFD-00201801
TDLOFD-002012 and Compensation
Dedicated CarrierInter-
TDLOFD-001036 Coverage Based
TDLBFD-00201802 Coverage
YES NO LOFD-001037 / frequency Based
HandoverIntra-
TDLBFD-00201804 frequency Handover
TDLOFD-001037 Distance Based Inter-
TDLBFD-00201805 Coverage
TDLBFD-00201801 frequency Based
HandoverInter-
YES NO TDLOFD-001050 frequency Handover
TDLBFD-00201802 Service Based Inter-
LOFD-070206 Distance Based Inter-
TDLBFD-00201804 frequency
RAN Handover
Sharing with
frequency
Mobility
Common Handover
between
Carrier LTE
YES NO TDLBFD-00201805
None None
Service
TDD andBased
LTE
RAN Sharing with Inter-
FDD
TDLOFD-001050
LOFD-001036 / /
LBFD-00201801 frequency
Coverage Handover
Dedicated CarrierIntra-
Hybrid RAN Based
Sharing
LOFD-070206
TDLOFD-001036
TDLBFD-00201801 Mobility
frequency
Coverage between
Handover
Based LTE
Intra-
YES NO LOFD-001037 / / TDD and LTE FDD
LBFD-00201802 Coverage Based
frequency Handover Inter-
TDLOFD-001037
TDLBFD-00201802 Hybrid
RAN RAN
Sharing
frequency Sharing
with
Handover
Coverage Based Inter-
TDLBFD-00201801 Common
YES NO frequencyCarrier
Handover
TDLBFD-00201802 RAN Sharing with
LOFD-001036 / /
LBFD-00201801 Distance Based
Coverage Based Inter-
Intra-
TDLBFD-00201804 Dedicated Carrier
TDLOFD-001036
TDLBFD-00201801 frequency Handover
frequency Handover
NO NO TDLBFD-00201805 Coverage Based Intra-
LOFD-001037 / /
LBFD-00201802 Service
Coverage Based
BasedInter-
Inter-
TDLOFD-001050 frequency Handover
TDLOFD-001037
TDLBFD-00201802 frequency
frequency Handover
Handover
LOFD-070206 Coverage Based LTE
Inter-
TDLBFD-00201801 Mobility between
NO NO frequency
Coverage
TDD Handover
Based
and LTE FDD Intra-
TDLBFD-00201802
Distance
frequency
Hybrid RAN Based Inter-
Handover
Sharing
TDLBFD-00201804
LBFD-00201801 frequency Handover
Coverage Based Inter-
YES NO TDLBFD-00201805
LBFD-00201802 Service Based Inter-
frequency Handover
TDLOFD-001050
LBFD-00201803
LBFD-00201801 frequency Handover
LOFD-070206 / Coverage Based
Cell Selection andIntra-
TDLBFD-00201801 Mobility
frequencybetween
Reselection HandoverLTE
YES NO TDD and LTE FDD
LBFD-00201802 / Coverage Based Inter-
LBFD-00201801 /
TDLBFD-00201802 Coverage
Hybrid RAN
frequency Based
Sharing
HandoverIntra-
TDLBFD-00201801 frequency Handover
NO NO
LBFD-00201802 / Coverage Based Inter-
TDLBFD-00201802 frequency Handover
YES NO None None
NO NO None None
PS Inter-RAT Mobility
LOFD-001019 /
NO NO between E-UTRAN
TDLOFD-001019
and UTRAN
PS Inter-RAT Mobility
LOFD-001019 /
YES NO between E-UTRAN
TDLOFD-001019
LOFD-001022 / SRVCC to UTRAN
and UTRAN
TDLOFD-001022 CS Fallback with LAI
YES NO LOFD-001068 / to UTRAN
TDLOFD-001068 E-UTRAN to UTRAN
TDLOFD-001078 PS Inter-RAT
CS/PS Mobility
steering
LOFD-001019 /
NO NO between E-UTRAN
TDLOFD-001019
and UTRAN
LOFD-001070 /
NO NO LOFD-001034 / Symbol
CS Power
Fallback to Saving
TDLOFD-001070
TDLOFD-001034
LOFD-002001 / GERAN
LOFD-001052 / Automatic Neighbour
Flash CS Fallback to
NO NO TDLOFD-002001
TDLOFD-001052 Relation
UTRAN (ANR)
LOFD-002002 / SRVCC
LOFD-001053 /
TDLOFD-002002 Flash CSFlexible
Inter-RAT ANR
Fallback to
TDLOFD-001053 Steering
RAN
GERAN to UTRAN
Sharing with
NO NO LOFD-001087
LOFD-001036 / E-UTRAN
Common Carrierto UTRAN
LOFD-001078 /
TDLOFD-001036 CS/PS Steering
RAN Sharing with
TDLOFD-001078
LOFD-001037 / SRVCC
Dedicated
UL CoMP tobased
UTRAN
Carrier on
NO NO TDLOFD-001022
TDLOFD-001037 CS Fallback
Hybrid to
RAN Sharing
Coordinated BBU UTRAN
TDLOFD-001033
LOFD-070206 Flash CS Fallback
Intra-Band Carrier to
TDLOFD-001052
LOFD-001092 /
NO NO UTRAN
Aggregation
CMAS Support for
TDLOFD-001088
TDLOFD-001092 CS Fallback
Downlink 2CC Steering
in
to UTRAN
20MHz
NO NO None None
Inter-Band Carrier
LOFD-070223
Aggregation for
LAOFD-00100101
LOFD-00102901 Downlink 2CC in
NO NO LAOFD-00100102/ Radio/transport
TDLOFD-00102901 20MHz
resource pre-emption
LAOFD-00100201 /
Carrier Aggregation for
TDLAOFD-00100201 Coverage Based
Downlink 2CC in Inter-
NO NO LAOFD-00100202
LBFD-00201802 / / frequency Handover
40MHz
TDLAOFD-00100202
TDLBFD-00201802 PS Inter-RAT
Support of UEMobility
LAOFD-070201
LOFD-001019 / / between
NO NO CategoryE-UTRAN
6
TDLAOFD-070201
TDLOFD-001019 and UTRAN
CA for Downlink
Intra-Band
eCoordinator Carrier
based2CC
LAOFD-070202
LOFD-001020 / PS Inter-RAT Mobility
From Multiple
Aggregation
RIM process Carriers
for
TDLAOFD-00100111
TDLOFD-001020 between E-UTRAN
NO NO None Carrier
Downlink
None Aggregation
optimization2CC in for
and
2CC
20MHz
FlashGERAN
based on
CS Fallback to
MRFD-090211 Coordinated
Coordinated
Inter-Band
SchedulingCarrier
UTRAN BBU
based
NO NO LOFD-001052/
LOFD-070208 Intra-band
Aggregation Carrier
for
PS Inter-RAT
Power Control(CloudMobility
TDLOFD-001052
LAOFD-00100101 Aggregation
Downlink
Distance 2CC
BasedforinInter-
between
BB) E-UTRAN
LOFD-001019/
LAOFD-00100102 Downlink
20MHz
frequency 2CC in
Handover
LBFD-00201802 / / and UTRAN
NO NO TDLOFD-001019
LAOFD-00100201 30MHz
Carrier
TDLBFD-00201802 Inter-RAT LoadInter-for
Service Aggregation
Based
LOFD-001044/
TDLAOFD-00100201 Downlink
LBFD-00201804 / /
frequency
Sharing to2CC
PS Inter-RAT in
Handover
Mobility
TDLOFD-001044
LAOFD-00100202 40MHz
CS Fallback to UTRAN
NO NO TDLBFD-00201804 UTRAN(based
between E-UTRAN on
LOFD-001033/
TDLAOFD-00100102 Support
PS of
Inter-RAT UE Mobility
LBFD-00201805 UMTS
and UTRANcell load
LAOFD-070201 / /
TDLOFD-001033 Category
between 6 Mobility
E-UTRAN
information)
PS Inter-RAT
TDLBFD-00201805
LOFD-001032
LOFD-001019 /
TDLAOFD-070201 Intra-LTE
CA for Load
Downlink 2CC
NO NO and GERAN
CS Fallback
between to UTRAN
E-UTRAN
LOFD-001019
LAOFD-070202/
TDLOFD-001032
TDLOFD-001019 Balancing
From Multiple Carriers
Service
(based
and GERAN based
on UMTS inter-
cell
TDLOFD-001019
LOFD-001020 /
TDLAOFD-00100111 Carrier
LOFD-001020 / Service based Inter- for
RAT
load Aggregation
handover
information) to
TDLOFD-001020 2CC
NO NO
TDLOFD-001020 RAT based
UTRAN handover on to
LOFD-001043 / Coordinated
Service based BBUinter-
LOFD-001043 / UTRAN
TDLOFD-001043 Intra-band
RAT handoverCarrierto
TDLOFD-001043 Service based Inter-
NO NO LOFD-001046 / Aggregation
GERAN for
LOFD-001046 / RAT handover to
TDLOFD-001046 Downlink
Distance 2CC ininter-
TDLOFD-001046 GERAN based
LOFD-001072 / 30MHz
RAT
LOFD-001072 / Distance basedtoInter-
handover
TDLOFD-001072 UTRAN
TDLOFD-001072 RAT handover to
LOFD-001073 / Distance
LOFD-001073 / UTRAN based inter-
TDLOFD-001073 RAT handover
TDLOFD-001073 Distance basedtoInter-
LOFD-001078 GERAN
RAT handover to
Mobility
GERAN Management
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
LOFD-001007 /
NO NO High Speed Mobility
TDLOFD-001007
Basic uplink-downlink
Intra-LTE User
LOFD-070215 /
NO NO subframe
Number Load configuration
TDLOFD-070215
LOFD-001036 / RAN Sharing with
uplink-downlink
Balancing
TDLOFD-001036 Common Carrier
subframe configuration
YES NO LOFD-001037 / RAN Sharing with
type1&2
LOFD-001036 /
TDLOFD-001037 RAN Sharing
Dedicated with
Carrier
uplink-downlink special
TDLOFD-001036
LOFD-070206 Common
Hybrid RAN
subframe Carrier
Sharing
configuration
NO NO TDLBFD-001007
LOFD-001037 / RAN
type 7Sharing with
TDLBFD-00100701
TDLOFD-001037 Dedicateduplink-
Carrier
Optional
TDLBFD-00100702
LOFD-070206 Hybrid RAN Sharing
downlink subframe
NO NO TDLOFD-001026
configuration
TDLOFD-00102601
uplink-downlink
TDLOFD-00102602
LBFD-002008 / Radio Bearer
NO NO subframe configuration
TDLOFD-00102603
TDLBFD-002008 Management
type 0
uplink-downlink special
NO NO None subframe
None configuration
type 4
LOFD-001025 / uplink-downlink
Adaptive Power special
NO NO subframe configuration
TDLOFD-001025 Consumption
type 5
LOFD-001025 / Adaptive Power
NO NO
TDLOFD-001025 Consumption
LOFD-00101502 /
NO NO Dynamic Scheduling
TDLOFD-00101502
NO NO None None
NO NO None None
LBFD-00201801 / Coverage Based Intra-
TDLBFD-00201801 frequency Handover
YES No
LBFD-00201802 / Coverage Based Inter-
LBFD-00201801 /
TDLBFD-00201802 Coverage
frequency Based Intra-
Handover
TDLBFD-00201801 frequency Handover
YES No
LBFD-00201802 / Coverage Based Inter-
LBFD-00201801 /
TDLBFD-00201802 Coverage
frequency Based Intra-
Handover
TDLBFD-00201801 frequency Handover
YES No
LBFD-00201802 / Coverage Based Inter-
LBFD-00201801 /
TDLBFD-00201802 Coverage
frequency Based Intra-
Handover
TDLBFD-00201801 frequency Handover
YES No
LBFD-00201802 / Coverage Based Inter-
TDLBFD-00201802 frequency Handover
YES No None None
NO No None None
YES NO None None
PS Inter-RAT Mobility
LOFD-001019 /
YES No between E-UTRAN
TDLOFD-001019
and UTRAN
PS Inter-RAT Mobility
LOFD-001019 /
YES No between E-UTRAN
TDLOFD-001019
and UTRAN
PS Inter-RAT Mobility
LOFD-001019 /
YES No between E-UTRAN
TDLOFD-001019
and UTRAN
PS Inter-RAT Mobility
LOFD-001019 /
YES No between E-UTRAN
TDLOFD-001019
and UTRAN
DANCENCELL(Remov
e Redundant E-
UTRAN Neighbor
Relationship),
UTRAN_DELREDUND
ANCENCELL(Remove
EUTRAN_DELREDUN
Redundant UTRAN
DANCENCELL~0,
Enumeration
Value Type Neighbor
GUI Value Range Unit
UTRAN_DELREDUND
Number/Bit
Relationship),
ANCENCELL~1,
GERAN_DELREDUN
GERAN_DELREDUN
Bit Field Type DANCENCELL(Remov None
DANCENCELL~2,
e Redundant GERAN
NOT_ALLOWED(NOT UTRAN_DELERRORN
Neighbor
_ALLOWED), NOT_ALLOWED~0,
Enumeration Type CELL~3, None
Relationship),
ALLOWED(ALLOWED ALLOWED~1
GERAN_DELERROR
UTRAN_DELERRORN
NOT_ALLOWED(NOT
MAX_SYNC_USER_1
) NCELL~4
CELL(Remove
_ALLOWED), Error
200(MAX_SYNC_USE NOT_ALLOWED~0,
Enumeration Type UTRAN Neighbor None
ALLOWED(ALLOWED
R_1200), ALLOWED~1
NOT_ALLOWED(NOT
Relationship),
) MAX_SYNC_USER_1
MAX_SYNC_USER_1
_ALLOWED),
GERAN_DELERROR 200~0,
NOT_ALLOWED~0,
Enumeration Type 800(MAX_SYNC_USE None
ALLOWED(ALLOWED
NCELL(Remove Error MAX_SYNC_USER_1
ALLOWED~1
R_1800),
)GERAN Neighbor 800~1,
MAX_SYNC_USER_2
Relationship) MAX_SYNC_USER_2
Enumeration Type 400(MAX_SYNC_USE None
400~2,
R_2400),
NOT_ALLOWED(NOT MAX_SYNC_USER_3
MAX_SYNC_USER_3
_ALLOWED), NOT_ALLOWED~0,
Enumeration Type 000~3, None
000(MAX_SYNC_USE
ALLOWED(ALLOWED ALLOWED~1
MAX_SYNC_USER_3
)R_3000), 600~4
MAX_SYNC_USER_3
ESN(ESN),
Enumeration Type 600(MAX_SYNC_USE ESN~0, MAC~1, IP~2 None
MAC(MAC), IP(IP)
R_3600)
String Type 0~32 characters N/A None
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
Interval Type 1~15 N/A day
PROXY(Proxy),
PROXY~0, CMP~1,
Enumeration Type CMP(CMP), None
MANUAL~2
MANUAL(Manual)
DEFAULT(Default),
DEFAULT~0,
Enumeration Type SPECIFIC(Specific), None
SPECIFIC~1, NULL~2
NULL(NULL)
IPPRECEDENCE(IP
IPPRECEDENCE~0,
Enumeration Type Precedence), None
DSCP~1
DSCP(DSCP)
MAIN(Main Mode),
MAIN~2,
Enumeration Type AGGRESSIVE(Aggres None
AGGRESSIVE~4
sive Mode)
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
BASE_BOARD(Base
Interval Type 0~7
Board), N/A None
BASE_BOARD~0,
E1_COVERBOARD(E
E1_COVERBOARD~3
1 Cover Board),
Enumeration Type , BACK_BOARD~4, None
BACK_BOARD(Back
ETH_COVERBOARD~
Board),
ETH(Ethernet Port), 5
Enumeration Type ETH_COVERBOARD( ETH~0, E1T1~1 None
E1T1(E1/T1 Port)
Ethernet Cover Board)
DISABLE(Disable), DISABLE~0,
Enumeration Type NONAUTH(No None
ENABLE(Enable) ENABLE~1
Authentication),
PAP(PAP NONAUTH~0, PAP~1,
Enumeration Type None
Authentication), CHAP~2
CHAP(CHAP
DISABLE(Disable),
Authentication) DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
Interval Type 1~254 N/A None
USERDATA(User
Interval Type 0~3
Data), SIG(Signaling N/A None
Data), OTHER(Other USERDATA~0, SIG~1,
Data), OM_HIGH(High OTHER~3,
Enumeration Type None
Level Maintenance OM_HIGH~4,
Data), OM_LOW(Low OM_LOW~5
Interval Type Level
0~63 Maintenance N/A None
Data)
1/2(1/2), 1.0(1.0),
1/2~3, 1.0~4, 2.0~5,
Enumeration Type 2.0(2.0), 4.0(4.0), Hz
4.0~6, 8.0~7, 16.0~8
8.0(8.0), 16.0(16.0)
FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
TRUE(TRUE)
FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
TRUE(TRUE)
FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
TRUE(TRUE)
IPv4(IPv4 Address),
Enumeration Type IPv4~0, IPv6~1 None
IPv6(IPv6 Address)
IP Address Type Valid IP address N/A None
NOT_CFG(NOT_CFG)
Enumeration Type NOT_CFG~0, CFG~1 None
, CFG(CFG)
PrivateCoding, PrivateCoding~0,
Enumeration Type None
StandardCoding StandardCoding~1
T_CRMAX_30S(30s),
Enumeration Type NOT_CFG, CFG
T_CRMAX_60S(60s), NOT_CFG~0, CFG~1 None
T_CRMAXHYST_30S( T_CRMAX_30S~0,
T_CRMAXHYST_30S
T_CRMAX_120S(120s
30s), T_CRMAX_60S~1,
~0,
),
Enumeration Type T_CRMAXHYST_60S( T_CRMAX_120S~2,
T_CRMAXHYST_60S s
T_CRMAX_180S(180s
60s), T_CRMAX_180S~3,
~1,
),
T_CRMAXHYST_120 T_CRMAX_240S~4
T_CRMAXHYST_120
Enumeration Type T_CRMAX_240S(240s s
S(120s),
) S~2,
T_CRMAXHYST_180 T_CRMAXHYST_180
Interval Type S(180s),
1~16 S~3,
N/A None
T_CRMAXHYST_240 T_CRMAXHYST_240
S(240s)
TTT_SF_MEDIUM_0D S~4
TTT_SF_MEDIUM_0D
Interval Type 1~16
OT25(0.25), N/A
OT25~0, None
TTT_SF_MEDIUM_0D TTT_SF_MEDIUM_0D
TTT_SF_HIGH_0DOT
OT50(0.5), TTT_SF_HIGH_0DOT
OT50~1,
Enumeration Type 25(0.25), 25~0, None
TTT_SF_MEDIUM_0D TTT_SF_MEDIUM_0D
TTT_SF_HIGH_0DOT
OT75(0.75), TTT_SF_HIGH_0DOT
OT75~2,
50(0.5),
TTT_SF_MEDIUM_LD FC0~0,
50~1, FC1~1,
TTT_SF_MEDIUM_LD
Enumeration Type FC2~2, None
TTT_SF_HIGH_0DOT
OT0(1)
FC0, FC1, FC2, FC3, OT0~3 FC3~3,
TTT_SF_HIGH_0DOT
75(0.75), FC4~4,
75~2, FC5~5,
FC4, FC5, FC6, FC7, FC0~0, FC1~1,
TTT_SF_HIGH_LDOT FC6~6, FC7~7,
TTT_SF_HIGH_LDOT
Enumeration Type FC8, FC9, FC11, FC2~2, FC3~3, None
0(1)
FC0, FC8~8,
0~3 FC9~9,
FC13,FC1, FC2,
FC15, FC3,
FC17, FC4~4, FC5~5,
FC4, FC11~10, FC13~11,
FC19FC5, FC6, FC7, FC6~6, FC7~7,
Enumeration Type FC8, FC9, FC11, FC15~12, FC17~13, None
FC8~8,
FC19~14 FC9~9,
FC13, FC15, FC17,
FC11~10, FC13~11,
FC19
Interval Type 1~8 FC15~12,
N/A FC17~13, None
FC19~14
r1(1), r2(2), r4(4), r1~0, r2~1, r4~2, r8~3,
Enumeration Type r8(8), r16(16), r32(32), r16~4, r32~5, r64~6, None
r64(64), Infinity(Infinity) Infinity~7
RSCP~0, ECN0~1,
Enumeration Type RSCP, ECN0, BOTH None
BOTH~2
PILOT_STRENGTH~0
PILOT_STRENGTH,
,120ms~0, 240ms~1,
Enumeration Type PILOT_PN_PHASE_A
120ms, 240ms, None
PILOT_PN_PHASE_A
480ms~2, 640ms~3,
ND_STRENGTH
480ms, 640ms, ND_STRENGTH~1
1024ms~4, 2048ms~5,
1024ms, 2048ms,
Enumeration Type 5120ms~6, None
5120ms, 10240ms,
10240ms~7, 1min~8,
1min, 6min, 12min,
6min~9, 12min~10,
Enumeration Type 30min, 60min
PILOT_STRENGTH 120ms~0, 240ms~1,
PILOT_STRENGTH~0 None
120ms, 240ms, 30min~11, 60min~12
480ms~2, 640ms~3,
480ms, 640ms,
1024ms~4, 2048ms~5,
1024ms, 2048ms,
Enumeration Type 5120ms~6, None
5120ms, 10240ms,
10240ms~7, 1min~8,
1min, 6min, 12min,
EventB1(EventB1), 6min~9, 12min~10,
EventB1~0,
Enumeration Type 30min, 60min None
EventB2(EventB2) 30min~11,
EventB2~1 60min~12
Interval Type 1~16 N/A None
SAME_AS_TRIG_QU
SAME_AS_TRIG_QU
Enumeration Type AN(Same as Trig None
AN~0, BOTH~1
Quan), BOTH
SAME_AS_TRIG_QU
SAME_AS_TRIG_QU
Enumeration Type AN(Same as Trig None
AN~0, BOTH~1
Quan), BOTH
RSRP~0, RSRQ~1,
Enumeration Type RSRP, RSRQ, BOTH None
BOTH~2
RSRP~0, RSRQ~1,
Enumeration Type RSRP, RSRQ, BOTH None
BOTH~2
0ms~0, 40ms~1,
64ms~2, 80ms~3,
Interval Type 0ms,
0~25540ms, 64ms, N/A None
100ms~4, 128ms~5,
80ms, 100ms, 128ms, 0ms~0, 40ms~1,
160ms~6, 256ms~7,
160ms, 256ms, 64ms~2,
0ms, 40ms, 64ms, 320ms~8,80ms~3,
480ms~9,
Enumeration Type 320ms, 480ms, 100ms~4, 128ms~5, ms
80ms, 512ms~10, 640ms~11,
512ms,100ms,
640ms,128ms, 0ms~0, 40ms~1,
160ms~6, 256ms~7,
160ms, 1024ms~12,
1024ms,256ms,
1280ms, 64ms~2,
320ms~8,80ms~3,
480ms~9,
Enumeration Type 0ms, 40ms,
320ms, 64ms,
480ms, 1280ms~13, ms
2560ms, 5120ms 100ms~4,
512ms~10,128ms~5,
640ms~11,
80ms, 640ms,128ms, 2560ms~14,
512ms,100ms, 160ms~6, 256ms~7,
160ms, 1024ms~12,
5120ms~15
1024ms,256ms,
1280ms, 320ms~8, 480ms~9,
Enumeration Type 320ms, 1280ms~13,
2560ms,480ms,
5120ms 512ms~10, 640ms~11,
ms
512ms, 640ms, 2560ms~14,
1024ms~12,
5120ms~15
1024ms, 1280ms,
Interval Type -120~-25 1280ms~13,
N/A dBm
2560ms, 5120ms
2560ms~14,
5120ms~15
Interval Type -48~0 N/A 0.5dB
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
T_RESEL_SF_0DOT2 T_RESEL_SF_0DOT2
Enumeration Type configure),
5(0.25), NOT_CFG~0,
5~0, CFG~1 None
CFG(Configure)
T_RESEL_SF_0DOT5 T_RESEL_SF_0DOT5
T_RESEL_SF_0DOT2
(0.5), T_RESEL_SF_0DOT2
~1,
Enumeration Type 5(0.25), 5~0, None
T_RESEL_SF_0DOT7 T_RESEL_SF_0DOT7
T_RESEL_SF_0DOT5
5(0.75), T_RESEL_SF_0DOT5
5~2,
(0.5),
T_RESEL_SF_1DOT0 ~1,
T_RESEL_SF_1DOT0
Enumeration Type None
T_RESEL_SF_0DOT7
(1.0) T_RESEL_SF_0DOT7
~3
BitString00(00),
5(0.75), BitString00~0,
5~2,
BitString01(01),
T_RESEL_SF_1DOT0 BitString01~1,
T_RESEL_SF_1DOT0
Enumeration Type None
BitString10(10),
(1.0) BitString10~2,
~3
BOOLEAN_FALSE(Fal
BitString11(11) BitString11~3
se), BOOLEAN_FALSE~0,
Enumeration Type None
BOOLEAN_TRUE(Tru BOOLEAN_TRUE~1
e)
Interval Type 0~31 N/A dB
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
BOOLEAN_FALSE(Fal
se), BOOLEAN_FALSE~0,
Enumeration Type None
BOOLEAN_TRUE(Tru BOOLEAN_TRUE~1
e)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
T_RESEL_SF_0DOT2 T_RESEL_SF_0DOT2
Enumeration Type configure),
5(0.25), NOT_CFG~0,
5~0, CFG~1 None
CFG(Configure)
T_RESEL_SF_0DOT5 T_RESEL_SF_0DOT5
T_RESEL_SF_0DOT2
(0.5), T_RESEL_SF_0DOT2
~1,
Enumeration Type 5(0.25), 5~0, None
T_RESEL_SF_0DOT7 T_RESEL_SF_0DOT7
T_RESEL_SF_0DOT5
5(0.75), T_RESEL_SF_0DOT5
5~2,
(0.5),
T_RESEL_SF_1DOT0 ~1,
T_RESEL_SF_1DOT0
Enumeration Type None
T_RESEL_SF_0DOT7
(1.0) T_RESEL_SF_0DOT7
~3
5(0.75),
NOT_CFG(Not 5~2,
Enumeration Type T_RESEL_SF_1DOT0
configure), T_RESEL_SF_1DOT0
NOT_CFG~0, CFG~1 None
(1.0)
CFG(Configure) ~3
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
T_RESEL_SF_0DOT2 T_RESEL_SF_0DOT2
Enumeration Type configure),
5(0.25), NOT_CFG~0,
5~0, CFG~1 None
CFG(Configure)
T_RESEL_SF_0DOT5 T_RESEL_SF_0DOT5
T_RESEL_SF_0DOT2
(0.5), T_RESEL_SF_0DOT2
~1,
Enumeration Type 5(0.25), 5~0, None
T_RESEL_SF_0DOT7 T_RESEL_SF_0DOT7
T_RESEL_SF_0DOT5
5(0.75), T_RESEL_SF_0DOT5
5~2,
(0.5),
T_RESEL_SF_1DOT0 ~1,
T_RESEL_SF_1DOT0
Enumeration Type None
T_RESEL_SF_0DOT7
(1.0) T_RESEL_SF_0DOT7
~3
5(0.75), 5~2,
Interval Type T_RESEL_SF_1DOT0
0~255 T_RESEL_SF_1DOT0
N/A None
(1.0) ~3
NOT_CFG(Not
T_RESEL_SF_0DOT2 T_RESEL_SF_0DOT2
Enumeration Type configure),
5(0.25), NOT_CFG~0,
5~0, CFG~1 None
CFG(Configure)
T_RESEL_SF_0DOT5 T_RESEL_SF_0DOT5
T_RESEL_SF_0DOT2
(0.5), T_RESEL_SF_0DOT2
~1,
Enumeration Type 5(0.25), 5~0, None
T_RESEL_SF_0DOT7 T_RESEL_SF_0DOT7
T_RESEL_SF_0DOT5
5(0.75), T_RESEL_SF_0DOT5
5~2,
(0.5),
T_RESEL_SF_1DOT0 ~1,
T_RESEL_SF_1DOT0
Enumeration Type None
T_RESEL_SF_0DOT7
(1.0) T_RESEL_SF_0DOT7
~3
5(0.75), 5~2,
Interval Type T_RESEL_SF_1DOT0
0~255 T_RESEL_SF_1DOT0
N/A None
(1.0) ~3
NOT_CFG(Not
T_RESEL_SF_0DOT2 T_RESEL_SF_0DOT2
Enumeration Type configure),
5(0.25), NOT_CFG~0,
5~0, CFG~1 None
CFG(Configure)
T_RESEL_SF_0DOT5 T_RESEL_SF_0DOT5
T_RESEL_SF_0DOT2
(0.5), T_RESEL_SF_0DOT2
~1,
Enumeration Type 5(0.25), 5~0, None
T_RESEL_SF_0DOT7 T_RESEL_SF_0DOT7
T_RESEL_SF_0DOT5
5(0.75), T_RESEL_SF_0DOT5
5~2,
(0.5),
T_RESEL_SF_1DOT0 ~1,
T_RESEL_SF_1DOT0
Enumeration Type None
T_RESEL_SF_0DOT7
(1.0) T_RESEL_SF_0DOT7
~3
5(0.75), 5~2,
Interval Type T_RESEL_SF_1DOT0
0~255 T_RESEL_SF_1DOT0
N/A None
(1.0) ~3
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
MERGE~0,
Enumeration Type MERGE, DISCARD None
DISCARD~1
DELTAF_2(-2dB), DELTAF_2~0,
Enumeration Type DELTAF0(0dB), DELTAF0~1, dB
DELTAF2(2dB) DELTAF2~2
DELTAF1(1dB), DELTAF1~0,
Enumeration Type DELTAF3(3dB), DELTAF3~1, dB
DELTAF5(5dB)
DELTAF_2(-2dB), DELTAF5~2
DELTAF_2~0,
DELTAF0(0dB), DELTAF0~1,
Enumeration Type dB
DELTAF1(1dB), DELTAF1~2,
DELTAF2(2dB)
DELTAF_2(-2dB), DELTAF2~3
DELTAF_2~0,
Enumeration Type DELTAF0(0dB), DELTAF0~1, dB
DELTAF2(2dB) DELTAF2~2
DELTAF_2(-2dB), DELTAF_2~0,
Enumeration Type DELTAF0(0dB), DELTAF0~1, dB
DELTAF2(2dB) DELTAF2~2
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DlCompSwitch(DlCom
Bit Field Type DlCompSwitch~0 None
pSwitch)
MumimoPuschPsicSwi
MumimoPuschPsicSwi
Bit Field Type tch(MumimoPuschPsic None
tch~0
Switch)
MODE1(DL band
Interval Type 0~255
division scheme No.1), N/A None
MODE2(DL band
MODE1~0, MODE2~1,
division scheme No.2),
Enumeration Type MODE3~2, None
MODE3(DL band
INVALID~255
division scheme No.3),
Interval Type INVALID(Invalid
-5~15 DL N/A dB
band division scheme)
CONGREG_LV4, CONGREG_LV4~2,
Enumeration Type None
CONGREG_LV8 CONGREG_LV8~3
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
0~46589,54436~6553
Interval Type N/A None
5
UTRAN_FDD, UTRAN_FDD~0,
Enumeration Type None
UTRAN_TDD UTRAN_TDD~1
FREE(FREE),
FREE~0,
Enumeration Type CONTROLLED(CONT None
CONTROLLED~1
ROLLED)
SHA1(SHA1),
DEFAULT_MODE(DE
Enumeration Type SHA1~0, SHA256~2 None
SHA256(SHA256)
FAULT_MODE),
DEFAULT_MODE~0,
CFG_UPD_SIP(CFG_
CFG_UPD_SIP~1,
Enumeration Type UPD_SIP), None
CFG_INIT_UPD_ADD
CFG_INIT_UPD_ADD
R~2
R(CFG_INIT_UPD_AD
IP Address Type Valid
DR) IP address N/A None
FTP(FTP),
Enumeration Type FTP~0, LDAP~1 None
LDAP(LDAP)
PLAINTEXT(Plaintext),
Enumeration Type PLAINTEXT~0, SSL~1 None
SSL(SSL)
NOVERIFY(No
DISABLE(Disable), DISABLE~0,
Enumeration Type Verifying), None
ENABLE(Enable) ENABLE~1
ALARM(Send an
NOVERIFY~0,
Alarm If Verifying CRL
Enumeration Type ALARM~1, None
Failed),
DISCONNECT~2
DISCONNECT(Discon
Interval Type nect If Verifying CRL
3000~4999 N/A None
Failed)
DENY(Deny),
Enumeration Type DENY~0, PERMIT~1 None
PERMIT(Permit)
IP(IP), ICMP(ICMP),
TCP(TCP), IP~0, ICMP~1, TCP~6,
Enumeration Type None
UDP(UDP), UDP~17, SCTP~132
SCTP(SCTP)
IP Address Type Valid IP address N/A None
DRAFT4(DRAFT4),
DRAFT4~0,
Enumeration Type STANDARD(STANDA None
STANDARD~1
RD)
MASTER(Master),
Enumeration Type MASTER~0, SLAVE~1 None
SLAVE(Slave)
SAAL(SAALLNK),
SAAL~0, SCTP~1,
Enumeration Type SCTP(SCTPLNK), None
SCTP6~2
SCTP6(SCTPLNK6)
BASE_BOARD(Base
Interval Type 0~7
Board), N/A None
BASE_BOARD~0,
E1_COVERBOARD(E
PPP(PPP Link), E1_COVERBOARD~3
1 Cover Board), PPP
MPGRP(Multi-link
Enumeration Type , BACK_BOARD~4, None
BACK_BOARD(Back
Group), ETH(Ethernet ETH_COVERBOARD~
Board),
Port), PPP~0, MPGRP~2,
5
Enumeration Type ETH_COVERBOARD(
ETHTRK(Ethernet ETH~3, ETHTRK~4, None
Ethernet
Trunk), Cover Board) LOOPINT~6, SUBIF~9
LOOPINT(Loopback
Interval Type 0~63
Interface), SUBIF(Sub- N/A None
interface)
Interval Type 0~7 N/A None
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
ALLPORT(All Ports),
E1_DOUBLE_FRAME( ALLPORT~0,
Enumeration Type SINGLEPORT(Single None
E1 Double Frames), SINGLEPORT~1
Port)
E1_UNBA(E1 E1_DOUBLE_FRAME
E1_CRC4_MULTI_FR
Unbalance), ~0,
E1_UNBA~0,
Enumeration Type AME(E1 CRC4 None
E1_BA(E1 Balance), E1_CRC4_MULTI_FR
E1_BA~1, T1~2
Multiple Frames),
T1(T1) AME~1,
T1_SUPER_FRAME(T
T1_SUPER_FRAME~
Enumeration Type 1 Super Frames), None
2,
T1_EXTENDED_SUP
HDB3(E1 HDB3 T1_EXTENDED_SUP
ER_FRAME(T1
Code), AMI(E1/T1 AMI HDB3~0, AMI~1,
Enumeration Type ER_FRAME~3, None
Extended Super B8ZS
Code), B8ZS(T1 B8ZS~2
E1_HYBRID_FRAME~
Frames),
Code) 5
E1_HYBRID_FRAME(
Interval Type 0~7
BASE_BOARD(Base
E1 Hybrid Frames) N/A None
Board),
BASE_BOARD~0,
E1_COVERBOARD(E
Enumeration Type E1_COVERBOARD~3 None
1 Cover Board),
ENDPOINT_GROUP( , BACK_BOARD~4
BACK_BOARD(Back ENDPOINT_GROUP~
EndPoint
Board) Group),
Enumeration Type 0, None
ENDPOINT_NODE(En
ENDPOINT_NODE~1
dPoint Node)
Interval Type 0~65535 N/A None
BASE_BOARD(Base
Interval Type 0~7
Board), N/A None
BASE_BOARD~0,
E1_COVERBOARD(E
E1_COVERBOARD~3
1 Cover Board),
PPP(PPP Link),
Enumeration Type , BACK_BOARD~4, None
BACK_BOARD(Back
MPGRP(Multi-link PPP ETH_COVERBOARD~
Board), ETH(Ethernet
Group), PPP~0, MPGRP~2,
5
Enumeration Type ETH_COVERBOARD(
Port), ETH~3, ETHTRK~4, None
Ethernet Cover Board)
ETHTRK(Ethernet TUNNEL~8
Trunk),
Interval Type 0~15
TUNNEL(Tunnel) N/A None
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
IKE_V1(IKE V1),
Enumeration Type IKE_V1~1, IKE_V2~2 None
IKE_V2(IKE V2)
IP(IP Identify),
Enumeration Type IP~1, FQDN~2 None
FQDN(Name Identify)
DISABLE(Disable), DISABLE~0,
Enumeration Type None
PERIODIC(Periodic) PERIODIC~2
BASE_BOARD(Base
Enumeration Type IP(IP)
Board), IP~1 None
BASE_BOARD~0,
E1_COVERBOARD(E
E1_COVERBOARD~3
1 Cover Board),
PPP(PPP Link),
Enumeration Type , BACK_BOARD~4, None
BACK_BOARD(Back
MPGRP(Multi-link PPP ETH_COVERBOARD~
Board), ETH(Ethernet
Group), PPP~0, MPGRP~2,
5
Enumeration Type ETH_COVERBOARD(
Port), ETH~3, ETHTRK~4, None
Ethernet Cover Board)
ETHTRK(Ethernet TUNNEL~8
Trunk),
Interval Type 0~15
TUNNEL(Tunnel) N/A None
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
HQ(High Quality),
Enumeration Type HQ~0, LQ~1 None
LQ(Low Quality)
BASE_BOARD(Base
String Type 0~47 characters
Board), N/A None
BASE_BOARD~0,
E1_COVERBOARD(E
E1_COVERBOARD~3
1 Cover Board),
Enumeration Type , BACK_BOARD~4, None
BACK_BOARD(Back
ETH_COVERBOARD~
Board),
5
Interval Type ETH_COVERBOARD(
0~7 N/A None
Ethernet Cover Board)
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
UP(Uplink),
Enumeration Type UP~1, BIDIR~2 None
BIDIR(Bidirection)
FOUR_TUPLE(FOUR
_TUPLE), FOUR_TUPLE~0,
Enumeration Type None
THREE_TUPLE(THRE THREE_TUPLE~2
E_TUPLE)
Enumeration Type NO(No), YES(Yes) NO~0, YES~1 None
Interval Type 0~65535 N/A None
NEXTHOP(Next Hop),
Enumeration Type NEXTHOP~0, IF~1 None
IF(Exit Interface)
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
BASE_BOARD(Base
Interval Type 0~1000000
Board), N/A Kbit
BASE_BOARD~0,
E1_COVERBOARD(E
E1_COVERBOARD~3
1 Cover Board),
Enumeration Type , BACK_BOARD~4, None
BACK_BOARD(Back
ETH_COVERBOARD~
Board),
5
Interval Type ETH_COVERBOARD(
32~1000000 N/A Kbit/s
Ethernet Cover Board)
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
LONG(Long),
Enumeration Type LONG~0, SHORT~1 None
SHORT(Short)
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
BASE_BOARD(Base
Board), BASE_BOARD~0,
Enumeration Type None
E1_COVERBOARD(E E1_COVERBOARD~3
1 Cover Board)
Interval Type 0~7 N/A None
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
SEGW_CONFIG_ON_
HOST(SeGW Config SEGW_CONFIG_ON_
on Host), HOST~0,
Enumeration Type None
SEGW_CONFIG_ON_ SEGW_CONFIG_ON_
PEER(SeGW Config PEER~1
Enumeration Type on Peer) IPv6(IPv6)
IPv4(IPv4), IPv4~0, IPv6~1 None
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
IKE_V1(IKE V1),
Enumeration Type IKE_V1~1, IKE_V2~2 None
IKE_V2(IKE V2)
MAIN(Main Mode),
MAIN~2,
Enumeration Type AGGRESSIVE(Aggres None
AGGRESSIVE~4
sive Mode)
FIXED(FIXED),
Enumeration Type FIXED~0, RANDOM~1 None
RANDOM(RANDOM)
FIXED(FIXED),
Enumeration Type FIXED~0, RANDOM~1 None
RANDOM(RANDOM)
IPPRECEDENCE(IP
IPPRECEDENCE~0,
Enumeration Type Precedence), None
DSCP~1
DSCP(DSCP)
HQ(High Quality),
Enumeration Type HQ~0, LQ~1 None
LQ(Low Quality)
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
Interval Type 0~7 N/A None
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
SINGLE_RET(SINGLE
_RET), SINGLE_RET~1,
Enumeration Type None
MULTI_RET(MULTI_R MULTI_RET~17
ET)
REGULAR(REGULAR
SINGLE(SINGLE),
),
Enumeration Type SINGLE~1, DUAL~2 None
DUAL(DUAL)
DAISY_CHAIN(DAISY REGULAR~1,
_CHAIN), DAISY_CHAIN~2,
Enumeration Type SECTOR_SPLITTING( SECTOR_SPLITTING None
SECTOR_SPLITTING) ~3,
, 2G_EXTENSION~4
Interval Type 1~8
2G_EXTENSION(2G_ N/A None
EXTENSION)
Interval Type 0~125 N/A None
MASTER(Master),
Enumeration Type MASTER~0, SLAVE~1 None
SLAVE(Slave)
Degree(Degree),
Enumeration Type Degree~0, Second~1 None
Second(Second)
-
Interval Type 180000000~18000000 N/A 1e-6 degree
0
1~100000(metric m(metric
Interval Type system);3~328080(imp N/A system);ft(imperial
erial system) system)
0~1000(metric m(metric
Interval Type system);0~3281(imperi N/A system);ft(imperial
al system) system)
EUTRAN_TDD, EUTRAN_TDD~1,
Enumeration Type EUTRAN_FDD, EUTRAN_FDD~2, None
EUTRAN EUTRAN~3
EUTRAN_TDD, EUTRAN_TDD~1,
Enumeration Type EUTRAN_FDD, EUTRAN_FDD~2, None
EUTRAN, NULL EUTRAN~3, NULL~4
NOT_CFG(NOT_CFG)
Enumeration Type NOT_CFG~0, CFG~1 None
, CFG(CFG)
GSM_dcs1800, GSM_dcs1800~0,
Enumeration Type None
GSM_pcs1900 GSM_pcs1900~1
0~46589,54436~6553
Interval Type N/A None
5
NOT_CFG(NOT_CFG)
Enumeration Type NOT_CFG~0, CFG~1 None
, CFG(CFG)
FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
TRUE(TRUE)
FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
TRUE(TRUE)
DEFAULT(Default),
DEFAULT~0,
Enumeration Type QCIPRIORITY(QCI None
QCIPRIORITY~1
priority)
NO_ADAPTIVE(NO_A
Interval Type 0~255
DAPTIVE), N/A None
OL_ADAPTIVE(OL_A NO_ADAPTIVE~0,
DAPTIVE), OL_ADAPTIVE~1,
Enumeration Type None
CL_ADAPTIVE(CL_A CL_ADAPTIVE~2,
DAPTIVE), OC_ADAPTIVE~3
TM2(TM2), TM3(TM3),
OC_ADAPTIVE(OC_A TM2~0, TM3~1,
Enumeration Type None
TM4(TM4),
DAPTIVE) TM6(TM6) TM4~2, TM6~3
TM2(TM2),
Enumeration Type ADAPTIVE(ADAPTIVE TM2~0, ADAPTIVE~1 None
)
GSM_dcs1800, GSM_dcs1800~0,
Enumeration Type None
GSM_pcs1900 GSM_pcs1900~1
QCI1(QCI 1),
Interval Type QCI2(QCI
0~255 2), N/A None
QCI3(QCI 3), QCI1~1, QCI2~2,
QCI4(QCI 4), QCI3~3, QCI4~4,
Enumeration Type QCI5(QCI 5), QCI5~5, QCI6~6, None
QCI6(QCI 6), QCI7~7, QCI8~8,
QCI7(QCI 7), QCI9~9
Interval Type 0~9,255
QCI8(QCI 8), N/A None
QCI9(QCI 9)
Interval Type 1~9 N/A None
FALSE(FALSE),
Enumeration Type FALSE~0, TRUE~1 None
TRUE(TRUE)
SELECTED_PLMNID~
SELECTED_PLMNID,
Enumeration Type 1, None
PRIMARY_PLMNID
PRIMARY_PLMNID~2
NULL, NULL~0,
Enumeration Type BASED_ON_RIM, BASED_ON_RIM~1, None
BASED_ON_ECO BASED_ON_ECO~2
v32(v32), v64(v64),
v32~0, v64~1, v128~2,
Enumeration Type v128(v128), None
v256~3
v256(v256)
RimUtranSwitch(RimUt
RimUtranSwitch~0,
Bit Field Type ranSwitch), None
EcoSwitch~1
EcoSwitch(EcoSwitch)
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
BASED_ON_X2FAUL
MMESELECTALGOS
T(Based on X2 Fault),
WITCHFORGUUE(MM MMESELECTALGOS
Bit Field Type BASED_ON_X2FAUL None
BASED_ON_X2USAG
ESELECTALGOSWIT WITCHFORGUUE~0
T~0,
E_WITH_NEGO(Base
CHFORGUUE) BASED_ON_X2USAG
d on X2 Usage with
Bit Field Type E_WITH_NEGO~1, None
Negotiation),
BASED_ON_X2USAG
BASED_ON_X2USAG
E_WITHOUT_NEGO~
Interval Type E_WITHOUT_NEGO(
1~50400 N/A min
2
Based on X2 Usage
Without Negotiation)
Interval Type 1~50400 N/A min
DISABLE(disable), DISABLE~0,
Enumeration Type None
ENABLE(enable) ENABLE~1
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
BOOLEAN_FALSE(Fal
se), BOOLEAN_FALSE~0,
Enumeration Type None
BOOLEAN_TRUE(Tru BOOLEAN_TRUE~1
e)
Interval Type 0~255 N/A None
AL0(0), AL04(0.4), AL0~0, AL04~1,
AL05(0.5), AL06(0.6), AL05~2, AL06~3,
Enumeration Type None
AL07(0.7), AL08(0.8), AL07~4, AL08~5,
AL09(0.9), AL1(1) AL09~6, AL1~7
Interval Type -127~-96 N/A dBm
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
18000~46589,54436~
Interval Type N/A None
65535
0~46589,54436~6553
Interval Type CELL_BW_N6(1.4M), N/A
CELL_BW_N6~0, None
5
CELL_BW_N15(3M), CELL_BW_N15~1,
CELL_BW_N25(5M), CELL_BW_N25~2,
Enumeration Type CELL_BW_N6(1.4M), CELL_BW_N6~0, None
CELL_BW_N50(10M), CELL_BW_N50~3,
CELL_BW_N15(3M),
CELL_BW_N75(15M), CELL_BW_N15~1,
CELL_BW_N75~4,
CELL_BW_N25(5M),
CELL_BW_N100(20M) CELL_BW_N25~2,
CELL_BW_N100~5
Enumeration Type None
CELL_BW_N50(10M), CELL_BW_N50~3,
CELL_BW_N75(15M), CELL_BW_N75~4,
Interval Type CELL_BW_N100(20M)
0~255 CELL_BW_N100~5
N/A None
48~50,96~100,146~15
Interval Type SFN(SFN), N/A 0.1MHz
0,183~200
CELL_COMBINATION
BOOLEAN_FALSE(Fal SFN~0,
(Cell
se), Combination), BOOLEAN_FALSE~0,
Enumeration Type CELL_COMBINATION None
TWO_RRU_COMBINA
BOOLEAN_TRUE(Tru BOOLEAN_TRUE~1
~1,
TION(TWO
e) RRU
TWO_RRU_COMBINA
Combination),
Enumeration Type TION~2, None
DIGITAL_COMBINATI
DIGITAL_COMBINATI
ON(Cell Digital
ON~3,
Interval Type Combination),
2~7 N/A None
MPRU_AGGREGATIO
MPRU_AGGREGATIO
N~5
1T1R~0, 1T2R~1,
N(MPRU_AGGREGAT
1T1R, 1T2R, 2T2R,
ION) 2T2R~2, 2T4R~3,
Enumeration Type 2T4R, 4T4R, 8T8R, None
4T4R~4, 8T8R~5,
2T8R, 4T8R
2T8R~6, 4T8R~7
String Type 0~256 characters N/A None
2_TO_1(2:1
Compression),
Enumeration Type 2_TO_1~0, 3_TO_1~1 None
3_TO_1(3:1
Compression)
Interval Type 1~64 N/A None
MBMSSwitch(MBMSS
Bit Field Type MBMSSwitch~0 None
witch)
ULSCH_STRATEGY_ ULSCH_STRATEGY_
Interval Type 0~255
EPF(EPF), N/A
EPF~0, None
ULSCH_STRATEGY_ ULSCH_STRATEGY_
MAX_CI(MAX_CI), MAX_CI~1,
Enumeration Type None
ULSCH_STRATEGY_ ULSCH_STRATEGY_
PF(PF), PF~2,
Interval Type ULSCH_STRATEGY_
0~2000 ULSCH_STRATEGY_
N/A ms
RR(RR) RR~3
NEW_TX(NEW_TX),
NEW_TX~0,
Enumeration Type ADAPTIVE_RETX(AD None
ADAPTIVE_RETX~1
APTIVE_RETX)
TM9Switch(TM9Switch
Bit Field Type TM9Switch~0 None
)OFF(OFF),
ECO_BASED(ECO_B OFF~0,
Enumeration Type ASED), ECO_BASED~1, None
ENB_BASED(ENB_BA ENB_BASED~2
SED)
AntRsPwrSwitch(AntR
Bit Field Type AntRsPwrSwitch~0 None
sPwrSwitch)
HANDOVERIMMEDIA
FixedMeasObjIDSwitc
TELY(HANDOVERIM FixedMeasObjIDSwitc
Bit Field Type h(FixedMeasObjIDSwit HANDOVERIMMEDIA None
MEDIATELY), h~0
ch) TELY~0,
BASEDONSIGNALST
BASEDONSIGNALST
Enumeration Type RENGTH(BASEDONS None
RENGTH~1,
IGNALSTRENGTH),
BASEDONFREQPRIO
BASEDONFREQPRIO
AbnUeSchSwitch(Abn
Bit Field Type RITY~2
AbnUeSchSwitch~0 None
RITY(BASEDONFREQ
UeSchSwitch)
PRIORITY)
DLSCH_PRI_TYPE_E DLSCH_PRI_TYPE_E
Interval Type 0~255
PF(EPF), N/A
PF~0, None
DLSCH_PRI_TYPE_P DLSCH_PRI_TYPE_P
F(PF), F~1,
Enumeration Type None
DLSCH_PRI_TYPE_M DLSCH_PRI_TYPE_M
AX_CI(MAX C/I), AX_CI~2,
Interval Type DLSCH_PRI_TYPE_R
0~100 DLSCH_PRI_TYPE_R
N/A %
R(RR) R~3
STRATEGYBASEDON
Enumeration Type 1(1), 2(2), 3(3)
COVERAGE(Coverag 1~1, 2~2, 3~3 None
e-based Selection STRATEGYBASEDON
Strategy), COVERAGE~1,
Enumeration Type None
STRATEGYBASEDON STRATEGYBASEDON
CAPACITY(Capacity- CAPACITY~2
Interval Type based
0~255 Selection N/A None
Strategy)
DB0_PWR_RAMPING DB0_PWR_RAMPING
Interval Type 0~255
_STEP(0dB), N/A
_STEP~0, None
DB2_PWR_RAMPING DB2_PWR_RAMPING
_STEP(2dB), _STEP~1,
Enumeration Type dB
DB4_PWR_RAMPING DB4_PWR_RAMPING
_STEP(4dB), _STEP~2,
DB6_PWR_RAMPING DB6_PWR_RAMPING
_STEP(6dB) _STEP~3
DBM_120(-120dBm), DBM_120~0,
DBM_118(-118dBm), DBM_118~1,
DBM_116(-116dBm), DBM_116~2,
DBM_114(-114dBm), DBM_114~3,
DBM_112(-112dBm), DBM_112~4,
DBM_110(-110dBm), DBM_110~5,
DBM_108(-108dBm), DBM_108~6,
B56_MSG_SIZE_GRO
DBM_106(-106dBm), B56_MSG_SIZE_GRO
DBM_106~7,
Enumeration Type UPA(56bits), UPA~0, dBm
DBM_104(-104dBm), DBM_104~8,
B144_MSG_SIZE_GR
DBM_102(-102dBm), B144_MSG_SIZE_GR
DBM_102~9,
OUPA(144bits),
DBM_100(-100dBm), OUPA~1,
DBM_100~10,
Enumeration Type bit
B208_MSG_SIZE_GR
DBM_98(-98dBm),
N3_PREMB_TRANS_ B208_MSG_SIZE_GR
DBM_98~11,
N3_PREMB_TRANS_
OUPA(208bits),
DBM_96(-96dBm),
MAX(3times), OUPA~2,
DBM_96~12,
MAX~0,
Interval Type B256_MSG_SIZE_GR
DBM_94(-94dBm),
N4_PREMB_TRANS_
0~94 B256_MSG_SIZE_GR
DBM_94~13,
N4_PREMB_TRANS_
N/A None
OUPA(256bits)
DBM_92(-92dBm),
MAX(4times), OUPA~3
DBM_92~14,
MAX~1,
NOT_CFG(Not
DBM_90(-90dBm)
N5_PREMB_TRANS_ DBM_90~15
N5_PREMB_TRANS_
Enumeration Type configure),
MAX(5times), NOT_CFG~0, CFG~1
MAX~2, None
CFG(Configure)
N6_PREMB_TRANS_ N6_PREMB_TRANS_
MAX(6times), MAX~3,
Interval Type 0~63
N7_PREMB_TRANS_ N/A
N7_PREMB_TRANS_ None
MAX(7times), MAX~4,
SF40_MAC_RESOLU
N8_PREMB_TRANS_ SF40_MAC_RESOLU
N8_PREMB_TRANS_
Enumeration Type TION_TIMER(40), TION_TIMER~4, None
MAX(8times), MAX~5,
SF48_MAC_RESOLU
N10_PREMB_TRANS SF48_MAC_RESOLU
N10_PREMB_TRANS
TION_TIMER(48),
_MAX(10times), TION_TIMER~5,
_MAX~6,
Enumeration Type subframe
SF56_MAC_RESOLU
N20_PREMB_TRANS SF56_MAC_RESOLU
N20_PREMB_TRANS
TION_TIMER(56),
_MAX(20times), TION_TIMER~6,
_MAX~7,
Interval Type SF64_MAC_RESOLU
N50_PREMB_TRANS
1~8 SF64_MAC_RESOLU
N50_PREMB_TRANS
N/A None
TION_TIMER(64)
_MAX(50times), TION_TIMER~7
_MAX~8,
DEFAULTMODE(Defa
N100_PREMB_TRAN
ult Mode), N100_PREMB_TRAN
DEFAULTMODE~0,
Enumeration Type S_MAX(100times), S_MAX~9, None
ADAPTIVEMODE(Ada ADAPTIVEMODE~1
N200_PREMB_TRAN
ptive Mode) N200_PREMB_TRAN
S_MAX(200times) S_MAX~10
Interval Type 0~255 N/A None
NORMAL~0,
Enumeration Type NORMAL, EXTENDED None
EXTENDED~1
ONE_SIXTH~0,
ONE_SIXTH, HALF,
Enumeration Type HALF~1, ONE~2, None
ONE, TWO
TWO~3
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
GSM_dcs1800, GSM_dcs1800~0,
Enumeration Type None
GSM_pcs1900 GSM_pcs1900~1
DTM_AVAILABLE, DTM_AVAILABLE~0,
Enumeration Type DTM_NOT_AVAILABL DTM_NOT_AVAILABL None
E E~1
GSM~0, GPRS~1,
Enumeration Type GSM, GPRS, EDGE None
EDGE~2
GSM_dcs1800, GSM_dcs1800~0,
Enumeration Type None
GSM_pcs1900 GSM_pcs1900~1
0~46589,54436~6553
Interval Type N/A None
5
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
18000~46589,54436~
Interval Type MBW6(1.4M), N/A None
65535
MBW15(3M), MBW6~0, MBW15~1,
MBW25(5M), MBW25~2, MBW50~3,
Enumeration Type None
MBW50(10M), MBW75~4,
MBW75(15M), MBW100~5
Interval Type MBW100(20M)
0~31 N/A 2dB
DISABLE(Disable), DISABLE~0,
Enumeration Type None
ENABLE(Enable) ENABLE~1
0~46589,54436~6553
Interval Type N/A None
5
0~46589,54436~6553
Interval Type N/A None
5
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
18000~46589,54436~
Interval Type N/A None
65535
0~46589,54436~6553
Interval Type N/A None
5
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
NOT_CFG(Not
Enumeration Type configure), NOT_CFG~0, CFG~1 None
CFG(Configure)
UTRAN_FDD, UTRAN_FDD~0,
Enumeration Type None
UTRAN_TDD UTRAN_TDD~1
0~46589,54436~6553
Interval Type N/A None
5
SymbolShutdownSwitc
SymbolShutdownSwitc
Bit Field Type h(Symbol shutdown
NBSLTEPLMNRoundS None
UTRAN_RIM_SWITC h~0
switch)
witch(NBSLTEPLMNR UTRAN_RIM_SWITC
H(UTRAN RIM
oundSwitch), NBSLTEPLMNRoundS
H~0,
Bit Field Type Switch),
NBSLTERANSharingS witch~0, None
GERAN_RIM_SWITC
GERAN_RIM_SWITC
witch(NBSLTERANSh NBSLTERANSharingS
UtranFreqLayerMeasS H~1
H(GERAN RIM Switch)
aringSwitch), witch~1,
Bit Field Type witch(UtranFreqLayer None
NBSUTRANRANShari UtranFreqLayerMeasS
NBSUTRANRANShari
MeasSwitch),
ngSwitch(NBSUTRAN witch~0,
ngSwitch~2,
UtranFreqLayerBlindS
RANSharingSwitch), UtranFreqLayerBlindS
NBSGERANRANShari
Bit Field Type witch(UtranFreqLayerB None
NBSGERANRANShari witch~1,
ngSwitch~3
lindSwitch),
ngSwitch(NBSGERAN UtranSrvccSteeringSwi
UtranSrvccSteeringSwi
Enumeration Type RANSharingSwitch)
OFF(Off), ON(On) tch~2
OFF~0, ON~1 None
tch(UtranSrvccSteerin
gSwitch)
VQM_ALGO_SWITCH VQM_ALGO_SWITCH
_OFF(Disable), _OFF~0,
Enumeration Type IntraOpUeNumPreemp None
VQM_ALGO_SWITCH VQM_ALGO_SWITCH
tSwitch(IntraOpUeNum
_ON(Enable) IntraOpUeNumPreemp
_ON~1
PreemptSwitch),
UlJointReceptionOver tSwitch~0,
Bit Field Type None
InterOpUeNumPreemp
BBUsSwitch(UlJointRe InterOpUeNumPreemp
ReduceInvalidA1A2Rp
tSwitch(InterOpUeNum UlJointReceptionOver
tSwitch~1
ceptionOverBBUsSwit
tSigSwitch(ReduceInv
PreemptSwitch) BBUsSwitch~0,
Bit Field Type ch),
alidA1A2RptSigSwitch) ReduceInvalidA1A2Rp None
FreqCfgCaOverBBUsS
FreqCfgCaOverBBUsS
, tSigSwitch~0,
witch~1
witch(FreqCfgCaOver
MultiQciHoExecOptSw MultiQciHoExecOptSw
Bit Field Type BBUsSwitch) None
itch(MultiQciHoExecO
PdcchOverlapSrchSpc itch~1,
GeranBlindNcellOptSw
ptSwitch),
Switch(PdcchOverlapS GeranBlindNcellOptSw
ReduceInvalidFreqPri
itch,
ReduceInvalidFreqPri
rchSpcSwitch), itch~0,
HoSwitch~2
Bit Field Type None
UtranBlindNcellOptSwi
HoSwitch(ReduceInval
CaCapbFiltSwitch(CaC UtranBlindNcellOptSwi
tch
idFreqPriHoSwitch)
apbFiltSwitch), tch~1
PdcchOverlapSrchSpc
Enumeration Type OFF(Off), ON(On)
PccAnchorSwitch(Pcc OFF~0, ON~1
Switch~0, None
AnchorSwitch), CaCapbFiltSwitch~1,
SccBlindCfgSwitch(Sc PccAnchorSwitch~2,
Enumeration Type OFF(Off), ON(On)
cBlindCfgSwitch), OFF~0, ON~1
SccBlindCfgSwitch~3, None
FreqCfgSwitch(FreqCf FreqCfgSwitch~4,
gSwitch), SccA2RmvSwitch~5,
Bit Field Type None
SccA2RmvSwitch(Scc CaTrafficTriggerSwitch
INTER_FREQ_IDLE_
A2RmvSwitch), ~6,
MLB_SWITCH(INTER
CaTrafficTriggerSwitch INTER_FREQ_IDLE_
HoWithSccCfgSwitch~
Bit Field Type None
_FREQ_IDLE_MLB_S
(CaTrafficTriggerSwitc MLB_SWITCH~0
7,
WITCH)
h),
BasedSriGapOptSwitc SccModA6Switch~8,
HoWithSccCfgSwitch( BasedSriGapOptSwitc
GbrAmbrJudgeSwitch
Bit Field Type h(BasedSriGapOptSwi None
HoWithSccCfgSwitch), h~0
~9
tch)
SPECSIGRETRANSO
SccModA6Switch(Scc
PTSWITCH(SPECSIG SPECSIGRETRANSO
Bit Field Type ModA6Switch), None
RETRANSOPTSWITC PTSWITCH~0
GbrAmbrJudgeSwitch(
H)
GbrAmbrJudgeSwitch)
LOADNOTBALANCES
CHSWITCH(LOADNO LOADNOTBALANCES
Bit Field Type None
TBALANCESCHSWIT CHSWITCH~0
CH)
Enumeration Type OFF(Off), ON(On) OFF~0, ON~1 None
ADAPTIVE_PROPOR
ADAPTIVE_PROPOR
Bit Field Type TION(ADAPTIVE_PR None
TION~0
OPORTION)
0~261120,275943~30
Interval Type N/A Ts
7200
UL(UL), DL(DL),
Enumeration Type ULDL(Combined UL UL~0, DL~1, ULDL~2 None
and DL)
8~240 24 24 CRLTSK
7~180 30 30 CERTCHKTSK
PROXY, CMP,
CMP(CMP) CMP(CMP) CERTCHKTSK
MANUAL
DEFAULT, SPECIFIC,
DEFAULT(Default) None CERTDEPLOY
NULL
IPPRECEDENCE,
DSCP(DSCP) DSCP(DSCP) DIFPRI
DSCP
0~63 48 48 DIFPRI
0~63 46 46 DIFPRI
0~63 18 18 DIFPRI
0~63 46 46 DIFPRI
0~7 0 0 DSCPMAP
0~7 0 0 ETHTRK
0~1 0 0 ETHTRK
0~2 0 0 ETHTRK
ENABLE(Enable ENABLE(Enable
DISABLE, ENABLE ETHTRK
LACP) LACP)
SINGLE_RATE, SINGLE_RATE(Single
None GTRANSPARA
DUAL_RATE Rate)
0,20~28800 0 0 IKECFG
0,60~28800 0 0 IKECFG
1~20 1 1 IPPATH
DISABLE,
PFS_GROUP1, DISABLE(Disable) DISABLE(Disable) IPSECPOLICY
PFS_GROUP2
LOCAL(Local LOCAL(Local
GLOBAL, LOCAL IPSECPOLICY
Configuration) Configuration)
0,1843200~42949672
WND_DISABLE, 69120000 69120000 IPSECPOLICY
95
WND_32, WND_64,
WND_128, WND_256,
WND_512, WND_DISABLE(0) None IPSECPOLICY
WND_1024,
WND_2048,
TUNNEL,
WND_4096 TUNNEL(Tunnel) TUNNEL(Tunnel) IPSECPROPOSAL
TRANSPORT
1~1000 10 10 MPGRP
0~1000 50 50 MPGRP
0~7 0 0 PORTSECURITY
0~1 0 0 PORTSECURITY
1~1000 10 10 PPPLNK
1~1000 6 6 PPPLNK
0~5 0 0 RSCGRP
0~1000 1 1 RSCGRPALG
0~10000 50 50 RSCGRPALG
0~6 3 3 RSCGRPALG
0~500 50 50 RSCGRPALG
0~500 25 25 RSCGRPALG
0~100 90 90 TACALG
0~100 90 90 TACALG
0~100 85 85 TACALG
0~100 85 85 TACALG
0~100 85 85 TACALG
0~100 85 85 TACALG
0~100 85 85 TACALG
0~100 85 85 TACALG
0~100 95 95 TOLCALG
0~100 90 90 TOLCALG
0~100 5 5 TOLCALG
0~100 95 95 TOLCALG
0~100 90 90 TOLCALG
USERDATA, SIG,
OTHER, OM_HIGH, None None
It is recommended that VLANCLASS
OM_LOW the value of this
parameter be
0~63 0 VLANCLASS
consistent with the
implementation of the
1~4094 1 differentiated
None service. VLANCLASS
0~7 0 0 VLANCLASS
0~255 6 6 IPCLKLNK
0~255 13 13 IPCLKLNK
0~255 7 7 IPCLKLNK
0~255 14 14 IPCLKLNK
-100000~100000 0 0 IPCLKLNK
1~4 4 4 IPCLKLNK
CnOperatorExtendedQ
0~5 None None
ci
CnOperatorExtendedQ
10~254 None None
ci
CnOperatorExtendedQ
0~9 0 None
ci
CnOperatorExtendedQ
0~9 0 None
ci
-100,-20~20 0 0 CnOperatorHoCfg
-100,-20~20 0 0 CnOperatorHoCfg
-100,-20~20 0 0 CnOperatorHoCfg
UTRAN, GERAN,
UTRAN UTRAN CSFallBackBlindHoCfg
CDMA2000
UTRAN, GERAN,
GERAN GERAN CSFallBackBlindHoCfg
CDMA2000, NULL
UTRAN, GERAN,
CDMA2000 CDMA2000 CSFallBackBlindHoCfg
CDMA2000, NULL
UTRAN, GERAN,
UTRAN UTRAN CSFallBackBlindHoCfg
CDMA2000
UTRAN, GERAN,
GERAN GERAN CSFallBackBlindHoCfg
CDMA2000, NULL
UTRAN, GERAN,
CDMA2000 CDMA2000 CSFallBackBlindHoCfg
CDMA2000, NULL
REDIRECTION:On,
REDIRECTION, REDIRECTION:On,CC
CCO_HO:On, CSFallBackPolicyCfg
CCO_HO, PS_HO O_HO:On,PS_HO:On
PS_HO:On
REDIRECTION:On,
REDIRECTION, REDIRECTION:On,CC
CCO_HO:On, CSFallBackPolicyCfg
CCO_HO, PS_HO O_HO:On,PS_HO:On
PS_HO:On
0~46589,54436~6553
0 0 ServiceIfHoCfgGroup
5
0,10~600 0 0 CounterCheckPara
0,128~4294967295 0 0 CounterCheckPara
ENodeBConnStateTim
1~200 20 20
er
ENodeBConnStateTim
1~200 20 20
er
ENodeBConnStateTim
1~200 35 35
er
ENodeBConnStateTim
3~15 15 15
er
ENodeBConnStateTim
1~200 35 35
er
ENodeBConnStateTim
1~200 35 35
er
ENodeBConnStateTim
0~1000 50 50
er
ENodeBConnStateTim
0~1000 35 35
er
1~16 4 4 RrcConnStateTimer
0~3600 20 20 RrcConnStateTimer
0~5 2 2 RrcConnStateTimer
5~3600 20 20 RrcConnStateTimer
0~30 9 9 CaMgtCfg
1~10 3 3 CaMgtCfg
0~300 50 50 CaMgtCfg
40~6000
SF10, SF20, SF32, 30 30 CellDrxPara
SF40, SF64, SF80,
SF128, SF160,
PSF1, PSF2, SF256,
PSF3, SF1280(1280 SF1280(1280
CellDrxPara
SF320,PSF5,
PSF4, SF512, SF640,
PSF6, subframes) subframes)
SF1024, SF1280,
PSF8, PSF10, PSF20,
SF2048, SF2560 PSF5(5 PDCCH PSF5(5 PDCCH
PSF30, PSF40, CellDrxPara
subframes) subframes)
PSF50,
PSF200,PSF60,
PSF300,
PSF80,
PSF500,PSF100,
PSF750, PSF200(200 PDCCH PSF200(200 PDCCH
PSF200 CellDrxPara
PSF1280, PSF1920, subframes) subframes)
PSF2560
0~255 None None CellHoParaCfg
0ms, InterRatHoCommGrou
0~15 40ms, 64ms, 2 2
80ms, 100ms, 128ms, p
160ms, 256ms,
InterRatHoCommGrou
320ms, 480ms, 640ms 640ms
p
512ms, 640ms,
1024ms, 1280ms, InterRatHoCommGrou
-141~-43 5120ms
2560ms, -111 -111
p
InterRatHoCommGrou
-20~-3 -20 -20
p
InterRatHoCommGrou
-141~-43 -115 -115
p
InterRatHoCommGrou
-20~-3 -24 -24
p
InterRatHoCommGrou
0~15 6 6
p
InterRatHoCdma1xRtt
0~255 None None
Group
InterRatHoCdma1xRtt
0~9 None None
Group
InterRatHoCdma1xRtt
0~15 2 2
Group
InterRatHoCdmaHrpd
0~255 None None
Group
InterRatHoCdmaHrpd
0~9 None None
Group
InterRatHoCdmaHrpd
0~15 2 2
Group
InterRatHoGeranGrou
0~255 None None
p
InterRatHoGeranGrou
0~9 None None
p
InterRatHoGeranGrou
0~15 2 2
p
0ms,
0~15 40ms, 64ms, 0 0 InterRatHoUtranGroup
80ms, 100ms, 128ms,
160ms, 256ms,
320ms, 480ms, 320ms 320ms(320ms) InterRatHoUtranGroup
512ms, 640ms,
1024ms, 1280ms,
-24~0
2560ms, 5120ms -18 -18 InterRatHoUtranGroup
0ms,
0~15 40ms, 64ms, 2 2 InterFreqHoGroup
80ms, 100ms, 128ms,
160ms, 256ms,
320ms, 480ms, 640ms 640ms InterFreqHoGroup
512ms, 640ms,
1024ms, 1280ms,
-141~-43 5120ms
2560ms, -105 -105 InterFreqHoGroup
0~15 2 2 InterFreqHoGroup
0ms,
-20~-340ms, 64ms, -20 -20 InterFreqHoGroup
80ms, 100ms, 128ms,
160ms, 256ms,
320ms, 480ms, 640ms 640ms InterFreqHoGroup
512ms, 640ms,
1024ms, 1280ms,
-141~-43 5120ms
2560ms, -103 -103 InterFreqHoGroup
-15~15 2 2 InterFreqHoGroup
0~15 2 2 IntraFreqHoGroup
1~15 1 1 Emc
1~15 1 1 Emc
PrivateCoding,
PrivateCoding None GlobalProcSwitch
StandardCoding
1~300 1 PSF5(5
None PDCCH S1ReestTimer
subframes) for FDD
PSF2(2 PDCCH
1~300 300 PSF10(10
subframes)
None PDCCH
for TDD in S1ReestTimer
subframes) for FDD
subframe configuration
PSF3(3
0 PDCCH
FORBID_AUTO_RMV, FORBID_AUTO_RMV( subframes)
FORBID_AUTO_RMV(
PSF2(2 PDCCHfor TDD in X2Interface
PERMIT_AUTO_RMV Forbid Auto Remove) subframe
Forbid Auto Remove)
configuration
subframes) for TDD in
0
subframe configuration
MANUAL_MODE, PSF3(3
SF10, SF20, SF32, MANUAL_MODE None PDCCH
1 X2Interface
AUTO_MODE subframes) for TDD in
SF40, SF64, SF80, PSF3(3 PDCCH
SF128,PSF2,
SF160, SF256, subframe configuration
subframes) for TDD in
PSF1, PSF3, SF10(10 subframes) SF10(10
SF320, SF512, SF640, subframesubframes)
1 configuration Drx
PSF4,
PSF1, PSF5,
PSF2, PSF6,
PSF3, PSF4(4 PDCCH
SF1024, SF1280, 2
PSF8,
PSF4, PSF10,
PSF5, PSF20,
PSF6, subframes) for TDD in
SF2048, SF2560 PSF5(5 PDCCH PSF2(2 PDCCH
PSF30, PSF40,
PSF8, PSF10, PSF20, subframe configuration Drx
subframes) subframes) for TDD in
PSF50, PSF40,
PSF30, PSF60, 2
subframe configuration
PSF80,
PSF50, PSF100,
PSF60, PSF10(10 PDCCH PSF3(3 PDCCH
3 Drx
PSF200
PSF80, PSF100, subframes) subframes) for TDD in
PSF3(3 PDCCH
PSF200, PSF300, subframe configuration
subframes) for TDD in
PSF500, PSF750, 3
subframe configuration
PSF1280, PSF1920, PSF4(4
4 PDCCH
PSF2560 subframes)
PSF3(3 PDCCHfor TDD in
subframe configuration
subframes) for TDD in
4
subframe configuration
PSF4(4
5 PDCCH
UU_DISABLE,
UU_DISABLE(Disable) UU_DISABLE(Disable) Drx
UU_ENABLE
SF2, SF5, SF8, SF10,
SF16, SF20, SF32,
SF40, SF64, SF80, SF10(10 subframes) SF10(10 subframes) Drx
SF128, SF160, SF256,
SF320, SF512, SF640
1~16 1 LTE->UTRAN: 1 Drx
SF128, SF160, SF256, SF1280(1280
SF320, SF512, SF640, subframes)
SF320(320 subframes) SF320(320
LTE->GERAN: subframes) Drx
SF1024, SF1280,
SF128,
SF2048,SF160,
SF2560SF256, SF2560(2560
SF320, SF512, SF640, SF1280(1280 subframes)
Drx
SF1024, SF1280, subframes) LTE->CDMA2000
IMS signaling:
SF2048, SF2560 1xRTT: SF1280(1280
IMSSignalling(IMS
10~254 None subframes)
Signalling)
None ExtendedQci
LTE->CDMA2000
Low-delay service:
IMSSignalling, TCPorBuffStreaming(T HRPD: SF1280(1280
LowDelay(Low Delay)
LowDelay, CP Based or Buffered subframes)
TCP signaling:
IMS service or1000
non- ExtendedQci
TCPorBuffStreaming Streaming) real-time
Low-delaystreaming
services:
service:
900
0.001~1, step:0.001 700 IMS
TCPorBuffStreaming(T
signaling: ExtendedQci
MinGbrRate_0_KB, TCP-based and1000
MinGbrRate_1_KB, CP Based
Low-delay or Buffered
services:
buffered streaming
MinGbrRate_2_KB, Streaming)
900
services: 700
0.001~1, step:0.001 700 ExtendedQci
MinGbrRate_0_KB,
MinGbrRate_4_KB, TCP-based and
MinGbrRate_1_KB,
MinGbrRate_8_KB, buffered streaming
MinGbrRate_2_KB, MinGbrRate_1_KB(1k MinGbrRate_1_KB(1k
services: 700
MinGbrRate_16_KB, ExtendedQci
MinGbrRate_4_KB, B/s) B/s)
MinGbrRate_32_KB,
MinGbrRate_8_KB,
MinGbrRate_64_KB, MinGbrRate_1_KB(1k MinGbrRate_1_KB(1k
MinGbrRate_16_KB,
MinGbrRate_128_KB, B/s) ExtendedQci
B/s)
MinGbrRate_32_KB,
MinGbrRate_256_KB,
MinGbrRate_64_KB,
MinGbrRate_512_KB
0~1, step:0.1
MinGbrRate_128_KB, 10 10 ExtendedQci
MinGbrRate_256_KB,
PBR_0_KBps,
MinGbrRate_512_KB
0~39
PBR_8_KBps, 0 None ExtendedQci
PBR_16_KBps,
PBR_32_KBps,
PBR_8_KBps(8kB/s) PBR_8_KBps(8kB/s) ExtendedQci
PBR_64_KBps,
PBR_128_KBps,
PBR_256_KBps,
9~16 11 11 ExtendedQci
PBR_INFINITY
FLOW_CTRL, FLOW_CTRL(Flow
None ExtendedQci
NON_FLOW_CTRL Control)
InterRatPolicyCfgGrou
0~39 None None
p
PS_HO:On,
PS_HO, SRVCC, InterRatPolicyCfgGrou
SRVCC:Off, None
REDIRECTION p
REDIRECTION:Off
InterRatPolicyCfgGrou
SRVCC SRVCC:On None
PS_HO:On, p
PS_HO, NACC_HO, NACC_HO:Off,
InterRatPolicyCfgGrou
CCO_HO, SRVCC, CCO_HO:Off, None
p
REDIRECTION SRVCC:Off,
REDIRECTION:Off
InterRatPolicyCfgGrou
SRVCC SRVCC:On None
p
CLASS_0, CLASS_1,
TPeriodBSRTimer_sf5, CLASS_1(CLASS_1) CLASS_1(CLASS_1) AlgoDefaultPara
CLASS_2
TPeriodBSRTimer_sf1
NO_ADAPTIVE,
0, MIMO_BF_ADAPTIVE MIMO_BF_ADAPTIVE
BfMimoAdaptiveParaC
TxD_BF_ADAPTIVE,
TPeriodBSRTimer_sf1 (MIMO_BF_ADAPTIV (MIMO_BF_ADAPTIV
fg
MIMO_BF_ADAPTIVE
6, E) E)
TM2, TM3, TM7, TM8,
TPeriodBSRTimer_sf2 BfMimoAdaptiveParaC
TM4,
0, TM9w/oPMI, TM3(TM3) TM3(TM3)
fg
TM9wPMI
TPeriodBSRTimer_sf3
2, ADAPTIVE(ADAPTIVE ADAPTIVE(ADAPTIVE
TM2, ADAPTIVE MimoAdaptiveParaCfg
TPeriodBSRTimer_sf4 ) )
0,
QCI1, QCI2, QCI3,
TPeriodBSRTimer_sf6
QCI4, QCI5, QCI6, None None TypDrbBsr
4,
QCI7, QCI8, QCI9
TPeriodBSRTimer_sf8
TPeriodBSRTimer_sf1
0, None TypDrbBsr
0(10 subframes)
TPeriodBSRTimer_sf1
sf320,
28, sf640, sf1280,
sf2560, sf5120,
TPeriodBSRTimer_sf1 sf320(sf320) None TypDrbBsr
sf10240
60,
GAP_PATTERN_TYP
TPeriodBSRTimer_sf3
E_1, GAP_PATTERN_TYP GAP_PATTERN_TYP
20, HoMeasComm
GAP_PATTERN_TYP E_1 E_1
TPeriodBSRTimer_sf6
E_2
40,
TPeriodBSRTimer_sf1
280,
TPeriodBSRTimer_sf2
560,
TPeriodBSRTimer_infi
FC0, FC1, FC2, FC3,
FC4, FC5, FC6, FC7,
FC8, FC9, FC11, FC6 FC6 HoMeasComm
FC0,
FC13,FC1, FC2,
FC15, FC3,
FC17,
FC4,
FC19FC5, FC6, FC7,
FC8, FC9, FC11, FC6 FC6 HoMeasComm
FC0,
FC13,FC1, FC2,
FC15, FC3,
FC17,
FC4,
FC19 FC5, FC6, FC7,
FC8, FC9, FC11, FC6 FC6 HoMeasComm
FC13, FC15, FC17,
FC19
NOT_CFG, CFG NOT_CFG NOT_CFG HoMeasComm
PILOT_STRENGTH,
PILOT_PN_PHASE_A
120ms, 240ms, PILOT_STRENGTH PILOT_STRENGTH InterRatHoComm
ND_STRENGTH
480ms, 640ms,
1024ms, 2048ms,
480ms 480ms InterRatHoComm
5120ms, 10240ms,
1min, 6min, 12min,
30min, 60min
PILOT_STRENGTH PILOT_STRENGTH PILOT_STRENGTH InterRatHoComm
120ms, 240ms,
480ms, 640ms,
1024ms, 2048ms,
480ms 480ms InterRatHoComm
5120ms, 10240ms,
1min, 6min, 12min,
30min, 60min
EventB1, EventB2 EventB1(EventB1) EventB1(EventB1) InterRatHoComm
1~16 8 8 InterRatHoComm
1~32 8 8 InterRatHoComm
0~32 0 0 InterRatHoComm
0~16 0 0 InterRatHoComm
1~8 4 4 IntraRatHoComm
SAME_AS_TRIG_QU SAME_AS_TRIG_QU
SAME_AS_TRIG_QU
AN(Same as Trig AN(Same as Trig IntraRatHoComm
AN, BOTH
Quan) Quan)
SAME_AS_TRIG_QU SAME_AS_TRIG_QU
SAME_AS_TRIG_QU
AN(Same as Trig AN(Same as Trig IntraRatHoComm
AN, BOTH
Quan) Quan)
0ms,
0~25540ms, 64ms, None None CSFallBackHo
80ms, 100ms, 128ms,
160ms, 256ms,
0ms, 40ms,
320ms, 64ms,
480ms, 40ms 40ms CSFallBackHo
80ms,
512ms, 640ms,128ms,
100ms,
160ms,
1024ms,256ms,
1280ms,
0ms, 40ms,
320ms,
2560ms, 64ms,
480ms,
5120ms 40ms 40ms CSFallBackHo
80ms,
512ms,100ms,
640ms,128ms,
160ms,
1024ms,256ms,
1280ms,
320ms,
2560ms,480ms,
5120ms 40ms 40ms CSFallBackHo
512ms, 640ms,
1024ms, 1280ms,
-120~-25
2560ms, 5120ms -106 -106 CSFallBackHo
1~10 4 4 CSFallBackHo
0~62 9 9 CellResel
0~62 7 7 CellResel
0~7 7 7 CellResel
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG CellResel
configure) configure)
-30~33 23 23 CellResel
0~62 29 29 CellResel
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG CellResel
configure) configure)
MBW6, MBW15,
MBW25, MBW50, MBW6(1.4M) MBW6(1.4M) CellResel
MBW75, MBW100
0~7 1 1 CellResel
T_RESEL_SF_0DOT2
NOT_CFG, CFG CFG(Configure) CFG(Configure) CellResel
5,
T_RESEL_SF_0DOT5
T_RESEL_SF_0DOT2 T_RESEL_SF_1DOT0 T_RESEL_SF_1DOT0
, CellResel
5, (1.0) (1.0)
T_RESEL_SF_0DOT7
T_RESEL_SF_0DOT5
5, T_RESEL_SF_0DOT7 T_RESEL_SF_0DOT7
,T_RESEL_SF_1DOT0 CellResel
5(0.75) 5(0.75)
T_RESEL_SF_0DOT7
BitString00,
5,
BitString01,
T_RESEL_SF_1DOT0 BitString01(01) BitString01(01) CellResel
BitString10,
BitString11
BOOLEAN_FALSE, BOOLEAN_FALSE(Fal BOOLEAN_FALSE(Fal
CellResel
BOOLEAN_TRUE se) se)
0~31 5 5 CellResel
0~31 4 4 CellResel
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG CellResel
configure) configure)
0~31 0 0 CellResel
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG CellReselCdma2000
configure) configure)
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG CellReselCdma2000
configure) configure)
0~7 1 1 CellReselCdma2000
0~7 1 1 CellReselCdma2000
0~7 1 1 CellReselGeran
0~7 1 1 CellReselUtran
0~16 0 0 CellSel
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG CellSel
configure) configure)
1~300 6 6 CellSiMap
If the
TimingAdvCmdOptSwi
MERGE, DISCARD DISCARD DISCARD
tch parameter is set to CellSiMap
OFF, it is
recommended that the
MERGE, DISCARD DISCARD DISCARD
TimeAlignmentTimer CellSiMap
parameter be set to
DELTAF_2, DELTAF0, SF1920 for non-ultra-
DELTAF0(0dB) DELTAF0(0dB) CellUlpcComm
DELTAF2 high-speed mobility
scenarios and SF500
DELTAF1, DELTAF3, for ultra-high-speed
DELTAF3(3dB) DELTAF3(3dB) CellUlpcComm
DELTAF5 mobility scenarios. If
the
DELTAF_2, DELTAF0, TimingAdvCmdOptSwi
DELTAF1(1dB) DELTAF1(1dB) CellUlpcComm
DELTAF1, DELTAF2 tch parameter is set to
DELTAF_2, DELTAF0, ON, it is recommended
DELTAF2(2dB) DELTAF2(2dB)
that the CellUlpcComm
DELTAF2
TimeAlignmentTimer
DELTAF_2, DELTAF0, parameter be set to
DELTAF2(2dB) DELTAF2(2dB)
SF10240. CellUlpcComm
DELTAF2
If the
TimingAdvCmdOptSwi
-2~12 4 tch parameter is set to4 CellUlpcComm
OFF, the value of the
-60~50,32767 32767 TimeAlignmentTimer
None EuSectorEqmGroup
parameter affects the
actual value of the
0~255 None LongDrxCycle
None TimeAlignmentTimer
parameter. To ensure
SF500, SF750,
that the value of the
SF1280, SF1920, SF1920(1920
LongDrxCycle TimeAlignmentTimer
SF2560, SF5120, subframes)
parameter is greater
SF10240, INFINITY
than or equal to SF80,
it is recommended that
the
TimeAlignmentTimer
parameter be set to
SF10240. If the
MS100_T300,
0~255
MS200_T300, None None UeTimerConst
MS300_T300, FDD:MS200_T300(20
MS100_T301,
MS400_T300, 0ms)
MS200_T301, MS200_T300(200ms) UeTimerConst
MS600_T300, TDD:MS1000_T300(1
MS300_T301,
MS1000_T300, 000ms)
MS400_T301,
MS1500_T300,
MS0_T310, MS200_T301(200ms) MS200_T301(200ms) UeTimerConst
MS600_T301,
MS2000_T300
MS50_T310,
MS1000_T301,
MS100_T310,
MS1500_T301,
MS1000_T311, MS1000_T310(1000m MS1000_T310(1000m
MS200_T310, UeTimerConst
MS2000_T301
MS3000_T311, s) s)
MS500_T310,
MS5000_T311,
MS1000_T310, MS10000_T311(10000 MS10000_T311(10000
MS10000_T311,
MS2000_T310 UeTimerConst
ms) ms)
MS15000_T311,
MS20000_T311,
n1, n2, n3, n4, n5, n6,
MS30000_T311 n1(1) n1(1) UeTimerConst
n8, n10
NORMAL_CP,
NORMAL_CP(Normal) NORMAL_CP(Normal) Cell
EXTENDED_CP
NORMAL_CP,
NORMAL_CP(Normal) NORMAL_CP(Normal) Cell
EXTENDED_CP
1~32 1 1 Cell
0~255
120ms, 240ms, None None CellDLIcicMcPara
480ms, 640ms,
1024ms, 2048ms,
5120ms 5120ms CellDLIcicMcPara
5120ms, 10240ms,
1min, 6min, 12min,
30min,
1~8 60min 8 8 CellDLIcicMcPara
0ms,
0~15 40ms, 64ms, 4 4 CellDLIcicMcPara
80ms, 100ms, 128ms,
160ms, 256ms,
320ms, 480ms, 640ms 640ms CellDLIcicMcPara
512ms, 640ms,
1024ms, 1280ms,
-15~15 5120ms
2560ms, -13 -13 CellDLIcicMcPara
10~100 50 50 CellLowPower
-10~0 -1 -1 CellLowPower
1~1440 5 5 CellLowPower
10~99 90 90 CellRacThd
10~99 90 90 CellRacThd
10~99 90 90 CellRacThd
10~99 90 90 CellRacThd
0~90 5 5 CellRacThd
0~90 5 5 CellRacThd
0~90 5 5 CellRacThd
0~99 65 65 CellRacThd
0~99 65 65 CellRacThd
0~99 65 65 CellRacThd
0~99 65 65 CellRacThd
1~100 90 90 CellRacThd
1~100 90 90 CellRacThd
1~100 90 90 CellRacThd
0~100 95 95 CellRacThd
0~100 90 90 CellRacThd
1~15 10 10 CellRacThd
Set the parameter
based on actual
0~50 20 service requirements.20 CellRacThd
The recommended
values are described
1~15 5 as follows: 5 CellRacThd
FDD:
For a cell with a 1.4
10~100 95 MHz bandwidth, a 95 CellRacThd
value in the range of 0
to 560 is
10~100 95 recommended; 95 CellRacThd
For a cell with a 3 MHz
10~100 90 bandwidth, a value in90 CellRacThd
the range of 0 to 1800
is recommended;
10~100 90 For a cell with a 5 MHz 90 CellRacThd
bandwidth, a value in
the range of 0 to 3000
0~9000 3000 is recommended; CellRacThd
For a cell with a 10
MHz bandwidth, a
00:00:00~23:59:59 0:00:00 value in the range 0:00:00
of 0 CellRfShutdown
to 3000 is
recommended;
00:00:00~23:59:59 6:00:00 For a cell with a6:00:00
15 CellRfShutdown
MHz bandwidth, a
The
valuevalue
in the0 range
is of 0
0~7 3 recommended if there3 CellRfShutdown
to 6000 is
is no remote
recommended;
interference
For a cell with to athe
20cell.
0~2 0 CellRicAlgo
The value 1
MHz bandwidth, ais
recommended
value in the range if there
of 0
OFF, ON OFF(Off) is
to remote
6000
OFF(Off) is interference CellRicAlgo
to the cell.
recommended;
TDD: For a TDD cell, a
00:00:00~23:59:59 0:00:00 value in the range 0:00:00
of 0 CellShutdown
to 6000 is
recommended.
00:00:00~23:59:59 6:00:00 6:00:00 CellShutdown
0~100 20 20 CellShutdown
0~100 20 20 CellShutdown
0~100 20 20 CellShutdown
0~100 20 20 CellShutdown
0~255
120ms, 240ms, None None CellULIcicMcPara
480ms, 640ms,
1024ms, 2048ms,
5120ms 5120ms CellULIcicMcPara
5120ms, 10240ms,
1min, 6min, 12min,
30min, 60min
1~8 8 8 CellULIcicMcPara
0ms,
0~15 40ms, 64ms, 4 4 CellULIcicMcPara
80ms, 100ms, 128ms,
160ms, 256ms,
320ms, 480ms, 640ms 640ms CellULIcicMcPara
512ms, 640ms,
1024ms, 1280ms,
-15~15 5120ms
2560ms,
ADAPTIVE_HARQ_S -10 -10 CellULIcicMcPara
W_ON,
ADAPTIVE_HARQ_S ADAPTIVE_HARQ_S ADAPTIVE_HARQ_S
CellUlschAlgo
W_OFF, W_SEMI_ON(SemiOn) W_SEMI_ON(SemiOn)
ADAPTIVE_HARQ_S In cells with the
W_SEMI_ON bandwidth of 1.4 MHz,
0.01~0.99, step:0.01 10 it is recommended that10 CellUlschAlgo
this parameter be set
to 50 for preallocation
0~100 25 CellUlschAlgo
UEs within each TTI.
In cells with other
1~40 5 bandwidths, the 5 CellUlschAlgo
recommended value is
25.
45~1500 80 CellUlschAlgo 80
HOPPING_OFF,
HOPPING_TYPE1,
HOPPING_OFF(Hoppi HOPPING_OFF(Hoppi
HOPPING_TYPE2, CellUlschAlgo
ng off) ng off)
HOPPING_TYPE2_RA
NDOM
0~100 0 0 CellUlschAlgo
Scenario A: The
16~15000 600 recommended value600 is CellUlschAlgo
3 if the cell serves a
large number of cell
2~3
EPF_CAPC_FACTOR 2 center users (CCUs). CellUlschAlgo
_1, Scenario B: The
EPF_CAPC_FACTOR recommended value is
0~2000
_0DOT01, 0 FDD: 50; TDD: 0
2 in commercial CellUlschAlgo
EPF_CAPC_FACTOR networks.
_0DOT5, EPF_CAPC_FACTOR EPF_CAPC_FACTOR
CellUlschAlgo
EPF_CAPC_FACTOR _1(1) _1(1)
_2,
EPF_CAPC_FACTOR
00:00:00~23:59:59 3:00:00 3:00:00 InterRatCellShutdown
_3,
EPF_CAPC_FACTOR
_4
00:00:00~23:59:59 5:00:00 5:00:00 InterRatCellShutdown
0~5000 20 20 InterRatCellShutdown
0~100 10 10 InterRatCellShutdown
0~100 10 10 InterRatCellShutdown
0~7 0 0 PUSCHCfg
2~48 1 1 PUCCHCfg
Cdma20001XrttPreRe
0~255 None None
g
Cdma20001XrttPreRe
000~999 None None
g
Cdma20001XrttPreRe
00~99,000~999 None None
g
Cdma20001XrttPreRe
1~4095 None None
g
Cdma20001XrttPreRe
0~15 None None
g
Cdma20001XrttPreRe
0~32767 None None
g
Cdma20001XrttPreRe
0~65535 None None
g
Cdma2000HrpdPreRe
0~255 None None
g
Cdma2000HrpdPreRe
000~999 None None
g
Cdma2000HrpdPreRe
00~99,000~999 None None
g
Cdma2000HrpdPreRe
0~255 0 0
g
Cdma2000HrpdRefCel
0~255 None None
l
Cdma2000HrpdRefCel
000~999 None None
l
Cdma2000HrpdRefCel
00~99,000~999 None None
l
Cdma2000HrpdRefCel
3~28 characters None None
l
Cdma2000HrpdRefCel
3~8 characters None None
l
Cdma2000HrpdRefCel
0~50 None None
l
bc0,
0~255bc1, bc2, bc3, None None Cdma2000Nfreq
bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc11,
bc12, bc13, bc14, None None Cdma2000Nfreq
bc15, bc16, bc17,
bc18, bc19, bc20,
0~2047
bc21 None None Cdma2000Nfreq
-15~15 0 0 Cdma2000Nfreq
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Cdma2000Nfreq
configure) configure)
0~15 8 8 Cdma2000Nfreq
0~32 0 0 GeranNcell
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG GeranNfreqGroup
configure) configure)
0~7 1 1 GeranNfreqGroup
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG GeranNfreqGroup
configure) configure)
-115~-25 0 0 GeranNfreqGroup
0~62 7 7 GeranNfreqGroup
0~62 7 7 GeranNfreqGroup
-15~15 0 0 GeranNfreqGroup
0~8 0 0 GeranNfreqGroup
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG EutranInterNFreq
configure) configure)
0~7 1 1 EutranInterNFreq
0~7 1 1 EutranInterNFreq
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG EutranInterNFreq
configure) configure)
0DOT25_ENUM,
0DOT5_ENUM,
1DOT0_ENUM(1.0) None EutranInterNFreq
0DOT75_ENUM,
dB-24, dB-22, dB-20,
0DOT25_ENUM,
1DOT0_ENUM
dB-18, dB-16, dB-14,
0DOT5_ENUM,
dB-12, dB-10, dB-8, 0DOT75_ENUM(0.75) None EutranInterNFreq
0DOT75_ENUM,
dB-6, dB-5, dB-4, dB-
1DOT0_ENUM
3, dB-2, dB-1, dB0,
dB0(0dB) dB0(0dB) EutranInterNFreq
dB1, dB2, dB3, dB4,
dB5, dB6, dB8, dB10,
dB12, dB14, dB16,
dB18, dB20, dB22,
dB24
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG EutranInterNFreq
configure) configure)
-30~33 23 23 EutranInterNFreq
BitString00,
BitString01, If the neighboring E-
BitString01(01) BitString01(01)
UTRAN frequency and EutranInterNFreq
BitString10,
BitString11 the serving frequency
BOOLEAN_FALSE, BOOLEAN_FALSE(Fal are in the same
BOOLEAN_FALSE(Fal
frequency band, the EutranInterNFreq
BOOLEAN_TRUE se) se)
value EventA3 is
EventA3, EventA4, recommended.
EventA4(EventA4) EutranInterNFreq
EventA5 If the neighboring E-
UTRAN frequency and
0~31 0 the serving frequency 0 EutranInterNFreq
are in different
frequency bands, the
0~31 0 value EventA4 is 0 EutranInterNFreq
recommended.
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG EutranInterNFreq
configure) configure)
0~8 0 0 EutranInterNFreq
bc0,
0~255bc1, bc2, bc3, None None Cdma2000BcSCellOp
bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc11,
bc12, bc13, bc14, None None Cdma2000BcSCellOp
bc15, bc16, bc17,
bc18, bc19, bc20,
bc21
0~5 None None Cdma2000BcSCellOp
0~46589,54436~6553
None None EutranNFreqSCellOp
5
GeranNFGroupSCellO
0~255 None None
p
GeranNFGroupSCellO
0~31 None None
p
GeranNFGroupSCellO
0~5 None None
p
0~32 0 0 UtranNCell
UTRAN_FDD,
UTRAN_FDD UTRAN_FDD UtranNFreq
UTRAN_TDD
-50~33 24 24 UtranNFreq
-15~15 0 0 UtranNFreq
0~62 6 6 UtranNFreq
0~62 6 6 UtranNFreq
0~31 0 0 UtranNFreq
Priority_0, Priority_1,
Priority_2, Priority_3,
Priority_4,
0~31 Priority_5, 0 0 UtranNFreq
Priority_0,
Priority_6, Priority_1,
Priority_7,
Priority_2,
Priority_8, Priority_3,
Priority_9,
Priority_4,
Priority_10,Priority_5, Priority_2(Priority 2) Priority_2(Priority 2) UtranNFreq
Priority_6,
Priority_11,Priority_7,
Priority_8,
Priority_12,Priority_9,
Priority_10,
Priority_13, Priority_2(Priority 2) Priority_2(Priority 2) UtranNFreq
Priority_0,
Priority_11,Priority_1,
Priority_14,
Priority_2, Priority_3,
Priority_12,
Priority_15, Priority_16
Priority_4,
0~8
Priority_13,Priority_5, 0 0 UtranNFreq
Priority_6,
Priority_14,Priority_7,
Priority_8,
Priority_15,Priority_9,
Priority_16
Priority_10, Priority_2(Priority 2) Priority_2(Priority 2) UtranNFreq
Priority_11,
Priority_12, NOT_CFG(Not NOT_CFG(Not
NOT_CFG,
Priority_13, CFG UtranExternalCell
configure) configure)
Priority_14,
Priority_15, Priority_16
0~255 0 None UtranExternalCell
0~100 80 80 ANR
0~100 0 0 ANR
1~200 5 5 ANR
1~200 5 5 ANR
1~10000 20 20 ANR
1~10000 20 20 ANR
0~100 99 99 MRO
1~60 1 1 MRO
0~100 5 5 MRO
0~100 60 60 MRO
1~7 5 5 MRO
0~9 None None SimuLoad
0~100 50 50 SimuLoad
0~100 50 50 SimuLoad
0~4294967295 0 0 TcpAckCtrlAlgo
1~255 1 1 TcpAckCtrlAlgo
0~20 3 3 TpeAlgo
0~65535 20 20 TpeAlgo
0~65535 80 80 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~65535 0 0 TpeAlgo
0~7 0 0 ACL
OP_LT, OP_GT,
OP_EQ, OP_NEQ, None None ACLRULE
OP_RANGE
OP_LT, OP_GT,
OP_EQ, OP_NEQ, None None ACLRULE
OP_RANGE
OP_EQ, OP_RANGE,
None None ACLRULE
OP_NOVLAN
0~7 0 0 BFDSESSION
0~1 0 0 BFDSESSION
0~7 0 0 BFDSESSION
3~10 3 3 BFDSESSION
0~63 48 48 BFDSESSION
0~7 0 0 DEVIP
0~1 0 0 DEVIP
0~7 0 0 DEVIP
0~1 0 0 E1T1
ALLPORT,
ALLPORT(All Ports) ALLPORT(All Ports) E1T1
SINGLEPORT
BASE_BOARD,
E1_COVERBOARD, None None E1T1
BACK_BOARD
ENDPOINT_GROUP, ENDPOINT_GROUP( ENDPOINT_GROUP(
EP2RSCGRP
ENDPOINT_NODE EndPoint Group) EndPoint Group)
0~7 0 0 EP2RSCGRP
0~1 0 0 EP2RSCGRP
0~15 0 0 EP2RSCGRP
0~7 0 0 ETHPORT
0~1 0 0 ETHPORT
BASE_BOARD,
None None ETHPORT
ETH_COVERBOARD
If an optical fiber is
0~5 None None
used for transmission, ETHPORT
set this parameter to
COPPER, FIBER, FIBER.
None ETHPORT
AUTO If an electrical cable is
used for transmission,
46~1800 1500 set this parameter 1500
to ETHPORT
COPPER.
10M, 100M, 1000M, AUTO(Automatic AUTO(Automatic
ETHPORT
AUTO Negotiation) Negotiation)
10~3600 10 10 IKEPEER
3~30 5 5 IKEPEER
3~10 5 5 IKEPEER
MD5, SHA1,
SHA1(SHA1) SHA1(SHA1) IKEPROPOSAL
AES_XCBC_96
0~7 0 0 IP2RSCGRP
0~1 0 0 IP2RSCGRP
0~15 0 0 IP2RSCGRP
0~15 0 0 IP2RSCGRP
0~7 0 0 IP2RSCGRP
0~1 0 0 IPPATH
0~7 0 0 IPRT
0~1 0 0 IPRT
0~7
BASE_BOARD, None None IPRT
UNCHANNELLED_CO
VERBOARD,
None None IPRT
E1_COVERBOARD,
BACK_BOARD,
PPP, MPGRP,
ETH_COVERBOARD PPP(PPP Link) None IPRT
TUNNEL, IPOA
0~15 0 0 IPRT
0~7 0 0 IPRT
1~255 60 60 IPRT
0~7 0 0 IPSECBIND
0~1 0 0 IPSECBIND
BASE_BOARD,
None None IPSECBIND
ETH_COVERBOARD
0~7 0 0 LR
0~1 0 0 LR
MPGRP, ETH,
None None LR
ETHTRK, TUNNEL
BASE_BOARD,
None None MPGRP
E1_COVERBOARD
0~7 0 0 MPLNK
0~1 0 0 MPLNK
0~15 0 0 MPLNK
0~3 0 0 MPLNK
0~1 0 0 MPLNK
0~7 0 0 MPLNK
TS1, TS2, TS3, TS4,
TS5, TS6, TS7, TS8,
TS9, TS10, TS11,
TS12, TS13, TS14,
TS15, TS16, TS17,
None None MPLNK
TS18, TS19, TS20, If SBT is set to
TS21, TS22, TS23,
BASE_BOARD, BASE_BOARD or
TS24, TS25, TS26,
E1_COVERBOARD, None BACK_BOARD,
None you MPLNK
TS27, TS28, TS29,
BACK_BOARD are advised to set
TS30, TS31 MPGRPSBT to
BASE_BOARD,
None BASE_BOARD. MPLNK
E1_COVERBOARD
If SBT is set to
BASE_BOARD, E1_COVERBOARD,
E1_COVERBOARD, None Noneare advised to set
you MPLNK
BACK_BOARD to MPGRPSBT to
E1_COVERBOARD.
MASTER, SLAVE None None OMCH
NONE, UDPSESSION,
NONE(NONE) None OMCH
UDPSESSIONGRP
0~7 0 0 PACKETFILTER
0~1 0 0 PACKETFILTER
ETH, ETHTRK,
None None PACKETFILTER
TUNNEL, SUBIF
BASE_BOARD,
BACK_BOARD, None None PACKETFILTER
ETH_COVERBOARD
0~7 0 0 PPPLNK
0~1 0 0 PPPLNK
BASE_BOARD,
E1_COVERBOARD, None None PPPLNK
BACK_BOARD
0~7 0 0 RSCGRP
0~1 0 0 RSCGRP
0, 1, 2, 3, 4, 5, 6, 7, 8,
9, 10, 11, 12, 13, 14, None None RSCGRP
15, DEFAULTPORT
The recommended
64~1000000 64 value is 1.5 to 2 times RSCGRP
of the TX bandwidth.
The recommended
64~1000000 1000000 value is twice the TX RSCGRP
bandwidth.
0~7 0 0 RSCGRPALG
0~1 0 0 RSCGRPALG
0~7
BASE_BOARD, None None RSCGRPALG
UNCHANNELLED_CO
VERBOARD,
None None RSCGRPALG
E1_COVERBOARD,
BACK_BOARD,
ETH_COVERBOARD
ATM, IP IP(IP) None RSCGRPALG
IMA, UNI, STM1,
FRAATM, PPP,
None None RSCGRPALG
MPGRP, ETH,
ETHTRK, TUNNEL
0~15 0 0 RSCGRPALG
0, 1, 2, 3, 4, 5, 6, 7, 8,
9, 10, 11, 12, 13, 14, None None RSCGRPALG
15, DEFAULTPORT
0~1000000 0 0 RSCGRPALG
0~1000000 0 0 RSCGRPALG
0~7 0 0 SCTPLNK
0~1 0 0 SCTPLNK
2~254 10 10 SCTPLNK
1~253 5 5 SCTPLNK
0~7 0 0 SCTPLNK
SECURITYTEMPLAT
0~65535 None None
E
SECURITYTEMPLAT
DISABLE, ENABLE DISABLE(Disable) None
E
SECURITYTEMPLAT
1~99 None None
E
SECURITYTEMPLAT
1~15 characters None None
E
SECURITYTEMPLAT
IKE_V1, IKE_V2 IKE_V2(IKE V2) IKE_V2(IKE V2)
E
SECURITYTEMPLAT
MAIN, AGGRESSIVE MAIN(Main Mode) MAIN(Main Mode)
E
SECURITYTEMPLAT
0~127 characters None None
E
0~63 46 46 TWAMPCLIENT
0~63 46 0 TWAMPRESPONDER
0~7 0 0 UDPSESSION
0~1 0 0 UDPSESSION
IPPRECEDENCE,
DSCP(DSCP) DSCP(DSCP) UDTPARAGRP
DSCP
0~7 0 0 VLANMAP
SINGLEVLAN,
None None VLANMAP
VLANGROUP
0~7 0 0 VLANMAP
3~6 3 3 GTPU
0~63 63 63 GTPU
SINGLE_RET,
None None RET
MULTI_RET
0~5 characters
UNUSED, BandI, NULL(empty string) None RETDEVICEDATA
BandII, BandIII,
BandIV, BandV,
UNUSED, BandI, UNUSED(UNUSED) None RETDEVICEDATA
BandVI, BandVII,
BandII, BandIII,
BandVIII, BandIX,
BandIV,
BandX BandV,
UNUSED, BandI, UNUSED(UNUSED) None RETDEVICEDATA
BandVI, BandVII,
BandII, BandIII,
BandVIII, BandIX,
BandIV,
BandX BandV,
UNUSED, BandI, UNUSED(UNUSED) None RETDEVICEDATA
BandVI, BandVII,
BandII, BandIII,
BandVIII, BandIX,
BandIV,
BandX BandV, UNUSED(UNUSED) None RETDEVICEDATA
BandVI, BandVII,
BandVIII, BandIX,
BandX
0~32 characters NULL(empty string) None RETDEVICEDATA
-10~30,3276.7,
32767 None RETSUBUNIT
step:0.1
0~7 0 0 IPCLKLNK
0~1 0 0 IPCLKLNK
0~255 0 0 IPCLKLNK
UNICAST,
L3_MULTICAST, UNICAST(Unicast) UNICAST(Unicast) IPCLKLNK
L2_MULTICAST
1588V2, G.8265.1,
1588V2(1588V2) None IPCLKLNK
1588V2_16.1
NULL, DEM_4_CHAN,
DEM_ECON_4_CHAN None None BASEBANDEQM
, DEM_2_CHAN
1~100000(metric 1(metric
system);3~328080(imp system);3(imperial None LOCATION
erial system) system)
0~1000(metric 0(metric
system);0~3281(imperi system);0(imperial None LOCATION
al system) system)
1~64 characters
DBS3900_LTE, 0 None NE
BTS3900_LTE,
BTS3900A_LTE, DBS3900_LTE(DBS39
None NODE
BTS3900L_LTE, 00 LTE)
BTS3900AL_LTE,
DBS3900A_LTE
0~256 characters NULL(empty string) None NODE
NON-
NON-CONCURRENT CONCURRENT(Non- None NODE
ConCurrent)
EUTRAN_TDD,
EUTRAN_FDD, EUTRAN EUTRAN CnOperatorHoCfg
EUTRAN
EUTRAN_TDD,
EUTRAN_FDD, NULL NULL CnOperatorHoCfg
EUTRAN, NULL
CnOperatorStandardQ
0~5 None None
ci
QCI1, QCI2, QCI3,
CnOperatorStandardQ
QCI4, QCI5, QCI6, None None
ci
QCI7, QCI8, QCI9
CnOperatorStandardQ
0~9 0 None
ci
CnOperatorStandardQ
0~9 0 None
ci
SERVICE_HO_QCI_B
SERVICE_HO_QCI_B
EAR_ALLOWED, SERVICE_HO_QCI_B CnOperatorStandardQ
EAR_ALLOWED(QCI
SERVICE_HO_QCI_B EAR_ALLOWED ci
Bear Allowed)
EAR_NOT_ALLOWED
OFF, ON OFF(Off) OFF CSFallBackPolicyCfg
GSM_dcs1800,
GSM_dcs1800 None RatFreqPriorityGroup
GSM_pcs1900
0~46589,54436~6553
0 None ServiceIfDlEarfcnGrp
5
NO_HO, PERMIT_HO,
NO_HO NO_HO ServiceIrHoCfgGroup
MUST_HO
SERVIC_IR_MEAS_N
O_ORDER, SERVIC_IR_MEAS_N SERVIC_IR_MEAS_N
ServiceIrHoCfgGroup
SERVICE_IR_MEAS_ O_ORDER O_ORDER
ORDER
1~256 None None SpidCfg
O_MODE(Bi- O_MODE(Bi-
U_MODE, O_MODE,
directional Optimistic directional Optimistic PdcpRohcPara
R_MODE
Profile0x0001, Mode)
Profile0x0001:on, Mode)
Profile0x0001: On,
Profile0x0002, Profile0x0002:on, Profile0x0002: On,
PdcpRohcPara
Profile0x0003, Profile0x0003:on, Profile0x0003: On,
Profile0x0004 Profile0x0004:on Profile0x0004: On
000~999 None None X2AutoSetupOperator
0~15 0 5 CaMgtCfg
OFF, ON
DB_6_P_A, OFF(Off) OFF(Off) CellDlpcPdschPa
Dual-antenna or four-
DB_4DOT77_P_A,
antenna: DB_3_P_A(-
DB_3_P_A,
DB_3_P_A(-3 dB) 3 dB) CellDlpcPdschPa
DB_1DOT77_P_A,
Single-antenna:
DB0_P_A, DB1_P_A,
DB0_P_A(0 dB)
DB2_P_A,
0~255 DB3_P_A None None CellDrxPara
DEFAULT,
DEFAULT(Default) DEFAULT(Default) CellDrxPara
QCIPRIORITY
ADAPTIVE(ADAPTIVE ADAPTIVE(ADAPTIVE
TM2, ADAPTIVE CellMimoParaCfg
) )
RESELBASED, RESELBASED(RESEL
None CellMlbHo
MLBPRIOBASED PRIOBASED)
0~2000 0 0 CellPreallocGroup
GSM_dcs1800,
GSM_dcs1800 None GeranInterfArfcn
GSM_pcs1900
0ms,
0~15 40ms, 64ms, 4 4 CellMcPara
80ms, 100ms, 128ms,
160ms, 256ms,
320ms, 480ms, 640ms 640ms CellMcPara
512ms, 640ms,
1024ms, 1280ms,
1~8
2560ms, 5120ms 8 8 CellMcPara
X2_OVER_OSS(X2So
X2_OVER_OSS,
nLink is set up over None GlobalProcSwitch
X2_OVER_S1
OSS)
LCG_PROFILE_0,
LCG_PROFILE_0 LCG_PROFILE_0 GlobalProcSwitch
LCG_PROFILE_1 The value OFF(Off) is
recommended if the
OFF, ON OFF(Off) OFF(Off)
eNodeB configuration GlobalProcSwitch
data on a network is to
be modified by using
OFF, ON ON(On) ON(On)
the interlocking GlobalProcSwitch
modification function
on the CME.
OFF, ON OFF(Off) GlobalProcSwitch
The value ON(On) is
recommended if the
OFF, ON OFF(Off) eNodeB
OFF(Off)configuration GlobalProcSwitch
data on a network is to
be modified by using
SELECTED_PLMNID, the automatic eNodeB
SELECTED_PLMNID None GlobalProcSwitch
PRIMARY_PLMNID configuration update
NULL, over the X2 interface.
BASED_ON_RIM, NULL None GlobalProcSwitch
BASED_ON_ECO
RimUtranSwitch, RimUtranSwitch:off,
None GlobalProcSwitch
EcoSwitch EcoSwitch:off
OFF, ON ON(On) OFF GlobalProcSwitch
MMESELECTALGOS MMESELECTALGOS
BASED_ON_X2FAUL None
BASED_ON_X2FAUL GlobalProcSwitch
WITCHFORGUUE WITCHFORGUUE:off
T:off,
T,
BASED_ON_X2USAG
BASED_ON_X2USAG
E_WITH_NEGO:off, None GlobalProcSwitch
E_WITH_NEGO,
BASED_ON_X2USAG
BASED_ON_X2USAG
E_WITHOUT_NEGO:o
E_WITHOUT_NEGO
1~50400 10080 None GlobalProcSwitch
ff
Release_R8,
Release_R8(Release
Release_R9, None S1Interface
8)
Release_R10
Release_R8,
Release_R10(Release
Release_R9, None X2
10)
Release_R10
Release_R8,
Release_R10(Release If the eNodeB works in
Release_R9, None
hybrid RAN sharing X2Interface
10)
Release_R10 mode, the
recommended value is
0~5,255 255 X2Interface
ranging from 0 to 5;
otherwise, set this
OFF, ON OFF(Off) parameter
OFF(Off) to the Drx
invalid value 255.
0~600
120ms, 240ms, 0 0 HoMeasComm
480ms, 640ms,
1024ms, 2048ms,
120ms, 480ms 480ms InterRatHoComm
5120ms,240ms,
10240ms,
480ms, 640ms,
1min, 6min, 12min,
1024ms, 2048ms,
30min, 60min 480ms 480ms InterRatHoComm
5120ms, 10240ms,
1min, 6min, 12min,
30min,
RSRP, 60min BOTH
120ms, RSRQ,
240ms, RSRP RSRP InterRatHoComm
480ms, 640ms,
1024ms, 2048ms,
120ms, 240ms 240ms IntraRatHoComm
5120ms,240ms,
10240ms,
480ms, 640ms,
1min, 6min, 12min,
1024ms, 2048ms,
30min, 60min 240ms 240ms IntraRatHoComm
5120ms, 10240ms,
1min, 6min, 12min,
30min,
RSRP, 60min
RSRQ, BOTH RSRP RSRP IntraRatHoComm
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG CellAccess
configure) configure)
1~100 16 16 CellOp
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG CellReselCdma2000
configure) configure)
0~15 8 8 CellReselCdma2000
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG CellReselCdma2000
configure) configure)
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Cell
configure) configure)
18000~46589,54436~
18000 None Cell
65535
0~46589,54436~6553
CELL_BW_N6, None None Cell
5
CELL_BW_N15,
CELL_BW_N25,
CELL_BW_N6, None None Cell
CELL_BW_N50,
CELL_BW_N15,
CELL_BW_N75,
CELL_BW_N25,
CELL_BW_N100 None None Cell
CELL_BW_N50,
CELL_BW_N75,
CELL_BW_N100
0~255 None None Cell
2_TO_1(2:1 2_TO_1(2:1
2_TO_1, 3_TO_1 Cell
Compression) Compression)
If a valid operator must
1~64 None None
be configured, set this Cell
parameter to a value
within the range of 0 to
0~5,255 255 Cell
5. If an invalid operator
must be configured,
0~65535 None set
None this parameter to SfnAuxResBind
255.
CellDynAcBarAlgoPar
0~255 None None
a
CellDynAcBarAlgoPar
20~60 20 20
a
CellDynAcBarAlgoPar
0~100 100 100
a
CellDynAcBarAlgoPar
0~100 80 80
a
0~30 0 0 CellRacThd
0~100 25 25 InterRatCellShutdown
TM9Switch(TM9Switch
TM9Switch TM9Switch:Off CellAlgoSwitch
):Off
OFF, ECO_BASED,
OFF(OFF) OFF(OFF) CellAlgoSwitch
ENB_BASED
FixedMeasObjIDSwitc FixedMeasObjIDSwitc
HANDOVERIMMEDIA None CellAlgoSwitch
h h:Off
TELY,
HANDOVERIMMEDIA
BASEDONSIGNALST
TELY(HANDOVERIM None CellAlgoSwitch
RENGTH,
MEDIATELY)
BASEDONFREQPRIO
RITY
AbnUeSchSwitch AbnUeSchSwitch:Off AbnUeSchSwitch:Off CellAlgoSwitch
DLSCH_PRI_TYPE_E
0~255
PF, None None CellDlschAlgo
DLSCH_PRI_TYPE_P
F, DLSCH_PRI_TYPE_E DLSCH_PRI_TYPE_E
CellDlschAlgo
DLSCH_PRI_TYPE_M PF(EPF) PF(EPF)
AX_CI,
DLSCH_PRI_TYPE_R
0~100 0 0 CellDlschAlgo
R
1~100 15 15 CellMLB
PRB_ONLY, For a network with
It
MLBis recommended
deployed not for that
UE_NUMBER_ONLY, DlDataMlbMode
PRB_OR_UE_NUMBE
PRB_ONLY(PrbMode) the first time, the set
PRB_ONLY(PrbMode) be CellMLB
to
For NON_TRIGGERED
a network
default value ofwith this
R when
parametercell
MLB the
deployed is 0load
not is
after for
a
1~10000 100 light
the andupgrade
first
version UEs the
time, areif this
100 CellMLB
evenly
default
parameter distributed
value is of this in
different cells in an
NON_TRIGGERED, NON_TRIGGERED(N parameter
unavailableisin0the after a
early
version
source stage
upgrade
version. of network
if this
The CellMLB
UENUMBASED ON_TRIGGERED)
deployment.
upgrade does not cell
parameter is If the
load is closeintothe
unavailable the full
OFF, ON OFF(Off) affect
OFF the MLB effects CellMLB
load
source and
on the live UEs
version. are
network. ThenotIn
evenly
upgrade distributed
this case,does you arenot
between
affect
advised thetocells,
MLB
set set this
effects
Proportion Proportion:Off Proportion:
parameter tooff this CellMLB
on
parameter to 10 afterIn
the live network.
UeNumBased.
this case, youIfare
the upgrade. this
0~50 0 advised
parameter to issetavailable
this CellMLB
parameter
in the source to 5version,
after
the
you upgrade.
are advised If this
to
0~50 0 parameter is available
inherit the parameter CellMLB
in the after
value source theversion,
FAIRSTRATEGY, you are
upgrade. advised
FAIRSTRATEGY(Fair FAIRSTRATEGY(FairFor a to
inherit
network thewithparameter
MLB CellMLB
PRIORITYBASED Strategy) Strategy)
value
deployed afterfor the
the first
LOADINFOFREQ, LOADINFOFREQ(LOA time, you are a
upgrade. For advised
LOADINFOFREQ
network with MLB CellMLB
ALLFREQ DINFOFREQ) to set this parameter to
PRBRATIOHIGHMOD deployed
10 so that for
the the first
number
PRBRATIOHIGHMOD PRBRATIOHIGHMOD
E,
E(PRBRATIOHIGHMO time,
of you are advised
unnecessary
E(PRBRATIOHIGHMO CellMLB
PRBRATIOLOWMOD to
DE) DE) this parameter
set
handovers for load to
E
PRB_USAGE, 5
balancing cannumber
so that the be
PRB_USAGE(PRB_U PRB_USAGE(Prb
of unnecessary
reduced to achieve
PRB_VALUATION_WI CellMLB
SAGE) Usage)
handovers
better balancingfor load
TH_CTRL
balancing
performance. can be
reduced to achieve
better balancing
performance.
If
of
to the cell
you bandwidth
PaPcOff. is
this-6,
1.4, parameter
3,SchPwr
are advised
or 5 MHz, is you
When
to set
invalid PaPcOff
for the tois - set
are
to advised
-6,
1200. you are toadvised
set this
bandwidths
parameter toofthe 1.4valueMHz
to
When PcfichPwr
set3 RaRspPwr
PaPcOff to
to
istheset--
and
of MHz,
PaPcOff. and
1200.
to -4.77, you are
recommended
When PaPcOff value
is set
set
When
advised
for-6, PaPcOff
theyou to set SchPwr
bandwidths is
to
to -4.77,
-954. youare advised
are
larger
to than 5 MHz
set PchPwr tois-setis 1.
advised
When
If the to set
PaPcOff
switch for
0~255 None 1200.
None
PcfichPwr
RaRspPwr
to to
-3, youadjustment
areto-954.
-954.
advised CellPdcchAlgo
dynamic
When PaPcOff
When
to set PaPcOfftois
SchPwr is set
set
on
to the number
-4.77, you are of-600.
to
When-3, you
OFDMPaPcOff are
symbols advised
is set
1~50 40 advised
to set to
PcfichPwr
RaRspPwr
-1.77, you setare PchPwrto--40
to CellPdcchAlgo
In
to non-ultra-high-
occupied
-954. by the
600.
advised
speed
PDCCH to
scenariosset SchPwr
is turned off,
When
When
to -354. PaPcOff
PaPcOff is
is set
set
1~4 1 where
set
to this
-3, youthe eNodeB
parameter
areare advised to 4 CellPdcchAlgo
to
When-1.77,
operates you
PaPcOffin FDD is set
for
to the
setyou bandwidth
PchPwr of
to -600.
advised
to
1.40,MHz
mode, thetoare
and setadvised
parameter
to is3 set
for
OFF, ON, When
PcfichPwr
RaRspPwr
to set PaPcOff
SchPwr toto -354.
-354.
to 0.
ON(On) value
other
to bandwidths.
-1.77, you are In CellPdcchAlgo
ECFIADAPTIONON If the PDCCH
When PaPcOff Symbol
is setis
ECFIADAPTIONON
addition, if this switch
advised
to 1, youto
Number
0, Adjust
are setadvised
PchPwr
Switch
recommended.
is turned off for In
ato
OFF, ON ON(On) to
to -354.
parameter
set
ON(On) PcfichPwr
RaRspPwr is
SchPwr to the set to0.
200. 0. CellPdcchAlgo
other
Whenyou scenarios,
small-bandwidth
PaPcOff iscell,
set
OFF,
When
parameter PaPcOff are
value advised
is set
OFF
PDCCH
to
to 0, thisresources
setyou are advised
parameter to
to
is
may 1,
2, you
recommended.
be are
insufficientadvised due
1, 2, 3 3(3) to
The set PchPwr
setting
3. set RaRspPwr
to PcfichPwr
SchPwr of to
this
to 0.
to
to
400. CellPdcchAlgo
to
WhenthePDCCH
smaller
PaPcOff is number is
STRATEGYBASEDON STRATEGYBASEDON parameter
If
of
the
200.
When PaPcOff
occupied OFDM is set
Symbol set
to
When
to 1,
3, you
recommended
Number you are
Adjust
PaPcOff
are advised
to
is be
Switch
advised set
COVERAGE, COVERAGE(Coverag STRATEGYBASEDON
symbols, and
to
the set
parameter
to 2, PchPwr
same
you
set SchPwr as
are is the
setto
advised 200.
to
to 600. CellPdcchAlgo
STRATEGYBASEDON e-based Selection COVERAGE
accordingly UEs
When
setting
ON,
to
If setyou
the PaPcOff
ofare
PcfichPwr
RaRspPwr
cell PaPcOff. isto
advised
bandwidth setisto
to
CAPACITY Strategy) cannot access the cell.
to 2,
PbchPwr
set this
400.
10, you
15, are
can
parameter
or advised
20ofMHz,be set to as
you1.
0~255 None The
In
None
to setsetting
this
follows: scenario,
PchPwr this
to set
400. GeranInterfCfg
When
are
parameter
this PaPcOff
advised
parameter to
is to is
set set
this
3setfor
When
Set
to 3,thisPaPcOff
you
parameter parameter
are to advised
the isvalue
recommended
the
to 3,bandwidth
-6,
based youonare
you areadvised
the to
of
advised
number be
1.4
2~20 1 to
of
the set PcfichPwr
RaRspPwr
PaPcOff
same asplus 3to
todB. GeranInterfCfg
MHz
to
of set
RBs and
PchPwr
PbchPwr to
interfered 2thefor
tois the
to600.
by-
600.
When
setting
bandwidthsPaPcOff
of PaPcOff.
of 3 set
MHz,
If
the
In
If
to the
1200.
the
-6, cell
GERAN
LTE TDD,
cell
you bandwidth
cell.
if
bandwidth
are the
advised is
cell
is
DbchPwr
5
10,MHz,
When 15, and
or
PaPcOff can
20 10 be
MHz,MHz.
is set
setyou
0~255 None bandwidth
10,
to
None
as 15,
set or
SchPwr
follows: is
20 10,
MHz,
to 15,
-600. or
you CellChPwrCfg
are
to
20
are
When advised
-4.77,
MHz,
advised you
you
PaPcOff to
toare
areset
set
is this
this
set
When
parameter
advised PaPcOff
to to
set theisvalue
set
value
advised
parameter
to -6,
to -4.77,
you to
you setare
to
are the
advised
-15.875~15.875 -600 of PaPcOff
PbchPwr
PcfichPwr
of PaPcOff
advised tototo plus
-954.
plus
set the 3 dB.
3value
SchPwr dB. CellChPwrCfg
to
Whenset DbchPwr
PaPcOff to
is -
set
of
When
to PaPcOff
-354.
1200. PaPcOff plus is3 dB.
set
to
to
When-6,
-3,
-6, you
you
PaPcOff are
are advised
advised
is set
-15.875~15.875 -600 When
to set PaPcOff
PchPwr
PbchPwr tois set
to-600.
to
to -6,
set
-3, you
RaRspPwr
-4.77, youare advised
are to- - CellChPwrCfg
When
600.
to
600. PaPcOfftoisto
set PcfichPwr
SchPwr set-
advised
to
When-4.77, to
you
PaPcOff setareis0. set
600.
When
DbchPwr PaPcOff toset-954. is set
-15.875~15.875 0 advised
to
When-1.77, to
you
PaPcOff arePchPwr
is CellChPwrCfg
to
When
to
-4.77,
-1.77,
-354.
advised
you
PaPcOff
to set
are is set
set
to
to -4.77,
advised
-3, you you
to set
are areSchPwr
advised
When
PbchPwr
advised
RaRspPwr
to 246. PaPcOff
totosetto-354. is set
-354.
-15.875~15.875 -600 to
to
Whenset DbchPwr
-3, you
PaPcOff are toset
advised
is - CellChPwrCfg
PcfichPwr
When PaPcOff to -354. is set
600.
to set
0, PchPwr
you are to
advised 0.
When
to
When-3,
0, youPaPcOff
you
PaPcOff areadvised
are is
advised
is set
set
When
to
to set
-3,
set PaPcOff
PbchPwr
you
RaRspPwr
SchPwr are is
advised
to set
to600.
to0.0.
-15.875~15.875 0 to -1.77, you are CellChPwrCfg
to
When
to
When-1.77, you
PaPcOff
set PcfichPwr
PaPcOff are is set
istoset 0.
advised
advised
to 1, you to
toare set
setare PchPwr
advised
When
to -1.77,
1,
DbchPwr PaPcOff
you you
are is
advised
to -354. set
-15.875~15.875 0 to
to 246.
set
set PbchPwr
-1.77,
advised you
to
SchPwr setare to800.
tois 200. CellChPwrCfg
When
When PaPcOff
PaPcOff is set
set
advised
RaRspPwr
When
to 0, to
PaPcOff
you are set
to 246.
is
advised set
to
When
to 0,
2,
2, you
PcfichPwr are
PaPcOff
you are advised
to 246. is
advised set
0~255 None to
to
Noneset
set DbchPwr
PchPwr
PbchPwr to to600.
to 0.
400. PDSCHCfg
When
to
When0,
set PaPcOff
you
SchPwr are
PaPcOff is
advised
tois set
1000.
set
When
to
When0,
set PaPcOff
you are
RaRspPwr
PaPcOff is
advised
is toset
set
to
to 1,
1,
3, you
you are
are advised
advised
to
600.
to set
set PcfichPwr
3, you
DbchPwrare advised toto 200.
-60~50 182 None
to
600.
When
to set
set PchPwr
PbchPwr
PaPcOff
SchPwr to to800.
tois 600.
set
1200. PDSCHCfg
When
When PaPcOff
PaPcOff is
is set
When
to
In
to 1,
peak
2, PaPcOff
you
you are
rate
are tests is set
advised
advised set
to
to 2,
set
under you
Single-antenna:
1, you are
are
RaRspPwr
all cell advised
advised0;to
0~3 1 to
to set
set DbchPwrtoto1000. 400. PDSCHCfg
to
800.set PchPwr
double-antenna:
PcfichPwr
bandwidths,
When PaPcOff youisto 1set
are
When
800.
When
advised PaPcOff
PaPcOff
toare setadvisedis set
is
this set
to
to 3,
3, you
you are advised
0~6 0 When
to 2,
parameter
None
to PaPcOff
you
set DbchPwr are to the is
advised set
value PDSCHCfg
to
of set
to 2,
set PchPwr
you are advised
RaRspPwr
PaPcOff. toto1200.
to
600.
In
to peak
1000.
When rate tests
set PcfichPwr
PaPcOff istoset
DB0_PWR_RAMPING under all cell
0~255
_STEP, None 1000.
When
None
to PaPcOff
-6, you are advised is set RACHCfg
bandwidths,
When
to 3,
setyou
SchPwr are you
PaPcOff toisare
advised -set
DB2_PWR_RAMPING advised toare setadvised
thisto
_STEP, DB2_PWR_RAMPING to 3,
set
1200. you
RaRspPwr
DB2_PWR_RAMPING
parameter
to
Whenset PcfichPwr
1200. PaPcOff to theisto value
set RACHCfg
DB4_PWR_RAMPING _STEP(2dB) _STEP(2dB)
of PaPcOff.
_STEP, 1200.
In
to peak
-4.77,rate youtests are
When
If
under
advised PaPcOff
the call
all bandwidth
tocellset SchPwris setis
DB6_PWR_RAMPING to -6, you are advised
_STEP 1.4, 3,
bandwidths,
to -954. or 5 MHz,
you you
are
to
areset
advised
When PchPwr
advised to set
PaPcOff to to is-set
set
this
1200.
PcfichPwr
parameter
to -3, you are to
to thethe value
advisedvalue
When
of PaPcOff
PaPcOff,
PaPcOff.
to set SchPwr whichtois-600.
set
is
to
same-4.77,
as you
that
When PaPcOff is set are
in LTE
advised to set PchPwr
the range of 32 to 37.
If a cell is configured
with HighSpeedFlag
other than
DBM_120, DBM_118, LOW_SPEED and
DBM_116, DBM_114, preamble format of 3,
DBM_112, DBM_110, this parameter can be
B56_MSG_SIZE_GRO
DBM_108, DBM_106, set to 63 or a value in
UPA, DBM_104(-104dBm) DBM_104(-104dBm)
the range of 48 to 53. RACHCfg
DBM_104, DBM_102,
B144_MSG_SIZE_GR
DBM_100, DBM_98, For TDD cells
OUPA,
DBM_96, DBM_94, B56_MSG_SIZE_GRO established
B56_MSG_SIZE_GROon an
LBBPd or UBBP: RACHCfg
B208_MSG_SIZE_GR
DBM_92, DBM_90
N3_PREMB_TRANS_ UPA(56bits) UPA(56bits)
OUPA,
MAX, If a cell is configured
B256_MSG_SIZE_GR
N4_PREMB_TRANS_
0~94 6 with HighSpeedFlag of6 RACHCfg
OUPA
MAX, LOW_SPEED and
N5_PREMB_TRANS_ preamble format of 0:
NOT_CFG(Not NOT_CFG(Not
Subframe assignment
NOT_CFG, CFG
MAX, RACHCfg
configure) configure)
of 0, this parameter
N6_PREMB_TRANS_
MAX, can be set to a value
0~63
N7_PREMB_TRANS_ 3 in the range of 0 to 8. RACHCfg
MAX, Subframe assignment
SF40_MAC_RESOLU
N8_PREMB_TRANS_ N10_PREMB_TRANS of 1, this parameter
N10_PREMB_TRANS
TION_TIMER, can be set to a value RACHCfg
MAX, _MAX(10times) _MAX(10times)
SF48_MAC_RESOLU
N10_PREMB_TRANS in the range of 0 to 7.
TION_TIMER,
_MAX, SF64_MAC_RESOLU Subframe assignment
SF64_MAC_RESOLU
of 2, this parameter RACHCfg
SF56_MAC_RESOLU
N20_PREMB_TRANS TION_TIMER(64) TION_TIMER(64)
TION_TIMER,
_MAX, can be set to 6 or a
SF64_MAC_RESOLU
N50_PREMB_TRANS
1~8 5 value in the range of 05 RACHCfg
TION_TIMER
_MAX, to 4.
N100_PREMB_TRAN Subframe assignment
DEFAULTMODE, DEFAULTMODE(Defa DEFAULTMODE(Defa
of 5, this parameter
S_MAX, SRSCfg
ADAPTIVEMODE ult Mode) ult
canMode)
be set to 3, 0, or 1.
N200_PREMB_TRAN
S_MAX If a cell is configured
0~255 None with
NoneHighSpeedFlag of PHICHCfg
LOW_SPEED and
preamble format of 1:
NORMAL, EXTENDED NORMAL NORMAL
For a cell established
Subframe assignment PHICHCfg
on
of 0,anthis
LBBPc and
parameter
ONE_SIXTH, HALF, configured
can be set to with the
a value
ONE ONE
normal cyclicofprefix
in the range 20 to PHICHCfg
ONE, TWO
(CP),
25. the parameter
value
Subframe assignment
0~255 None None
(1) PCCHCfg
of 1,20this
MHz
DS2_DELTA_SHIFT or 15 MHzis
parameter
channel
recommended.
can be set bandwidth:
to a value16
(2)
For 10
in the MHz
a cell
range or
of520 MHz
establishedto
1~16 16 PCCHCfg
channel
on
25. an bandwidth:
LBBPc and 8
(3)
If a 3cell
MHz
configured or 1.4the
with MHz
is configured
0~255 None channel
extended
with bandwidth:
CP, the 4of
NoneHighSpeedFlag PUCCHCfg
parameter
LOW_SPEED value and
DS1_DELTA_SHIFT, DS3_DELTA_SHIFT
preamble format of 2:is
DS1_DELTA_SHIFT(d
DS2_DELTA_SHIFT, recommended.
Subframe assignment PUCCHCfg
s1)
DS3_DELTA_SHIFT For
of 0,athis
cellparameter
established
on
canan beLBBPd
set to aorvalue
UBBP
0~1000 6 and
in theconfigured
range of 30 to 6
with PUCCHCfg
the
34. normal CP, the
parameter value
Subframe assignment
0~20 1 of 1, this parameter is1
DS1_DELTA_SHIFT PUCCHCfg
recommended.
can be set to a value
For
in a cell
the rangeestablished
of 30 to EutranExternalCellPlm
000~999 None None
on
34.an LBBPd or UBBP n
and configured
If a cell with
is configured
extended
with CP,
HighSpeedFlagthe of EutranExternalCellPlm
00~99,000~999 None None
parameter
LOW_SPEED value and n
DS3_DELTA_SHIFT
preamble format of 3:is
recommended. EutranExternalCellPlm
0~1048575 None None
Subframe assignment
n
of 0, this parameter
can be set to a value EutranExternalCellPlm
0~255 None None
in the range of 40 to n
44.
If a cell is configured
with HighSpeedFlag of
LOW_SPEED and
preamble format of 4:
Subframe assignment
of 0, this parameter
EutranExternalCellPlm
000~999 None None
n
EutranExternalCellPlm
00~99,000~999 None None
n
GeranExternalCellPlm
0~65535 None None
n
GeranExternalCellPlm
1~65533,65535 None None
n
GeranExternalCellPlm
000~999 None None
n
GeranExternalCellPlm
00~99,000~999 None None
n
GeranExternalCellPlm
000~999 None None
n
GeranExternalCellPlm
00~99,000~999 None None
n
bc0,
0~15bc1, bc2, bc3, None None Cdma20001XrttExtCell
bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc11,
bc12, bc13, bc14, None None Cdma20001XrttExtCell
bc15, bc16, bc17,
bc18, bc19, bc20,
0~2047
bc21 None None Cdma20001XrttExtCell
bc0,
0~15bc1, bc2, bc3, None None Cdma20001XrttNCell
bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc11,
bc12, bc13, bc14, None None Cdma20001XrttNCell
bc15, bc16, bc17,
bc18, bc19, bc20,
0~2047
bc21 None None Cdma20001XrttNCell
0~7 2 2 Cdma2000BandClass
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG Cdma2000BandClass
configure) configure)
0~7 2 2 Cdma2000BandClass
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG GeranExternalCell
configure) configure)
GSM_dcs1800,
None None GeranExternalCell
GSM_pcs1900
DTM_AVAILABLE,
DTM_NOT_AVAILABL DTM_NOT_AVAILABL
DTM_NOT_AVAILABL GeranExternalCell
E E
E
PERMIT_RMV_ENUM
PERMIT_RMV_ENUM PERMIT_RMV_ENUM
, GeranNcell
(Permit ANR Remove) (Permit ANR Remove)
FORBID_RMV_ENUM
PERMIT_HO_ENUM, PERMIT_HO_ENUM( PERMIT_HO_ENUM(
GeranNcell
FORBID_HO_ENUM Permit Ho) Permit Ho)
GSM_dcs1800,
None None GeranNfreqGroup
GSM_pcs1900
GeranNfreqGroupArfc
0~255 None None
n
GeranNfreqGroupArfc
0~31 None None
n
GeranNfreqGroupArfc
0~1023 None None
n
0~46589,54436~6553
None None EutranInterNFreq
5
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG EutranInterNFreq
configure) configure)
18000~46589,54436~
18000 None EutranInterNFreq
65535
MBW6, MBW15,
MBW25, MBW50, None None EutranInterNFreq
MBW75, MBW100
0~62 11 11 EutranInterNFreq
0~46589,54436~6553
None None EutranExternalCell
5
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG EutranExternalCell
configure) configure)
18000~46589,54436~
18000 None EutranExternalCell
65535
0~46589,54436~6553
None None EutranNFreqRanShare
5
0~7 0 0 EutranNFreqRanShare
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG GeranRanShare
configure) configure)
0~7 0 0 GeranRanShare
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG UtranRanShare
configure) configure)
0~7 0 0 UtranRanShare
0~255 None None UtranNFreq
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG UtranNFreq
configure) configure)
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG UtranNFreq
configure) configure)
0~7 1 1 UtranNFreq
NOT_CFG(Not NOT_CFG(Not
NOT_CFG, CFG UtranExternalCell
configure) configure)
UTRAN_FDD,
UTRAN_FDD UTRAN_FDD UtranExternalCell
UTRAN_TDD
NORMAL,
NORMAL(Normal NORMAL(Normal
LBBP_LARGE_CAPA FddResMode
Mode) Mode)
CITY
NORMAL, NORMAL(Normal
NORMAL(NORMAL) FddResMode
LARGECAPABILITY Mode)
0~46589,54436~6553
None None PccFreqCfg
5
0~46589,54436~6553
None None SccFreqCfg
5
BASED_NCL, BASED_NCL(BASED_
BASED_NCL ANR
NOT_BASED_NCL NCL)
CA_UE_CAP,
CA_UE_CAP(CA UE
CA_UE_CARRIER_N None ANR
Capability)
UM, ANR_UE_CAP
0~261120,275943~30
0 You are advised to set0 TddFrameOffset
7200 this parameter to ON
in either of the
OFF, ON OFF(Off) following
OFF(Off) scenarios: TddResModeSwitch
Only some cells
served by the eNodeB
OFF, ON OFF(Off) are bound to TddResModeSwitch
baseband processing
units.
OFF, ON OFF(Off) None
The UBBPd is installed eNodeBAutoPowerOff
in the eNodeB, and
cell combination must
22:00:00~05:00:00 0:00:00 None
be enabled. eNodeBAutoPowerOff
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None
USERADDINFO Read & Write N/A
COUNTRY in a in a the UE in idle mode)
CERTREQ
CERTREQ MO MO must
must
contain only
contain only theprintable No (And no impact on
Read & Write N/A
ASCII characters
following printable(the the UE in idle mode)
ASCII value
ASCII characters: withinA~Z
the
range of 32 to 127). No (And no impact on
a~z
ORG' (in) + , - . / 0~9 :
a CERTREQ Read & Write N/A
the UE in idle mode)
= ?.
MO must contain only
The stringASCII
printable length of No (And no impact on
COUNTRY
ORGUNIT inaa ASCII Read & Write N/A
characters in (the the UE in idle mode)
CERTREQ
value within the must
MO range
be 0 or
contain
of 32 to 2.
only
127).printable
STATEPROVINCENA No (And no impact on
Read & Write N/A
ASCII
ME in acharacters
CERTREQ (the the UE in idle mode)
ASCII value within
MO must contain only the
range of 32 to 127). No (And no impact on
printable ASCII
LOCALITY in a Read & Write N/A
the UE in idle mode)
characters
CERTREQ (the MO ASCII
must
value
contain only the
within range
printable No (And no impact on
of 32 to 127). Read & Write N/A
ASCII characters (the the UE in idle mode)
ASCII value within the
range No (And no impact on
None of 32 to 127). Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None
LOCALNAME in a Read & Write N/A
the UE in idle mode)
CERTREQ
LOCALIP inMO a must
contain
CERTREQ onlyMO printable
must No (And no impact on
Read & Write N/A
ASCII characters
be a valid IP address (the the UE in idle mode)
ASCII
of class A, B, or C. the
value within In
range of 32 to 127). No (And no impact on
addition, it cannot be Read & Write N/A
the UE in idle mode)
set to the reserved IP
addresses 127.x.x.x or
None but can be set
0.x.x.x Read Only N/A N/A
to 0.0.0.0.
None Read Only N/A N/A
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In a CERTCHKTSK
No (And no impact on
MO, PERIOD must be Read & Write N/A
the UE in idle mode)
smaller than ALMRNG.
In a CERTCHKTSK
No (And no impact on
MO,
In anPERIOD
ACLRULE must
MO,be Read & Write N/A
the UE in idle mode)
smallerand
MFRG thanSMPT
ALMRNG.
must not be both set to No (And no impact on
None
YES. Read & Write N/A
the UE in idle mode)
In an ACLRULE MO,
MFRG and DMPT
Read Only N/A N/A
must not be both set to
YES.
In the ACLRULE MO, No (And no impact on
None Read & Write N/A
this parameter is valid the UE in idle mode)
only when PT is set to
a valid value. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In a
In the DIFPRI
DIFPRI MO,MO, the
value
OMLOWPRI range of this be
must No (And no impact on
None
parameter is from 0 to Read & Write N/A
smaller than or equal the UE in idle mode)
63
In aif PRIRULE
DIFPRI
to OMHIGHPRI. MO, is set to
DSCP.
OMLOWPRI
In the DIFPRI MO, ifmust be Read & Write Yes BS
In the DIFPRI
smaller
PRIRULE than orMO,
is set to the
equal
value
to range
OMHIGHPRI.
DSCP, of this
the value range
parameter
In
In the
of the DIFPRI
this DIFPRI is from
parameter MO,is0ififto
MO, Read & Write Yes BS
7 if PRIRULE
PRIRULE
from
PRIRULE is
is set
0 to 63. is set
set to to
to
IPPRECEDENCE.
DSCP, the
In the DIFPRI
DSCP, value
MO,
this parameter range
if
of
can be set to any is
this
PRIRULE parameter
is set to Read & Write Yes BS
from
value0intothe
IPPRECEDENCE, 63.range of the0
In the range
value
to 63. DIFPRI ofMO,
this if
PRIRULE
parameter isis set
from to 0ifto Read & Write Yes BS
In the DIFPRI MO,
IPPRECEDENCE,
7.
PRIRULE is set to the
value range
IPPRECEDENCE, of this this
None
parameter is from Read Only N/A N/A
parameter can be 0 set to
7.
to any value in the
range
None of 0 to 7. Read Only N/A N/A
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
Interface S1 and
None Read & Write Yes
services in the cell
In the IPPATH MO,
this parameter is valid
In anwhen
IPPATH MO, if Read & Write Yes BS
only
In the IPPATH PATHTYPE
MO,set
IPMUXSWITCH
is to FIXED.isisvalid
setparameter
this
to ENABLE, the
only
In anwhen
IPPATH
difference MO, if
between Read & Write Yes BS
IPMUXSWITCH
FRAMELEN andis set
to ENABLE.
ENABLE, the must
SUBFRAMELEN
difference between Read & Write Yes BS
be larger than 4.
FRAMELEN
In the IPPATH andMO,
SUBFRAMELEN
this parameter is validmust
Read & Write Yes BS
be
onlylarger
whenthan 4.
In the IPPATH MO,
IPMUXSWITCH is set
this
to
None parameter is valid
ENABLE. Read & Write Yes BS
only when
IPMUXSWITCH is set
to ENABLE.
None Read & Write Yes BS
In the IPSECPOLICY
MO, this parameter is
valid only when Read & Write Yes BS
In the IPSECPOLICY
LTCFG is set to
MO,
LOCAL. this parameter is
valid only when Read & Write Yes BS
LTCFG is set to
LOCAL. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In
Nonethe Read Only N/A N/A
PORTSECURITY MO,
this
In a parameter
PORTSECURITY can be
set
MO, this parameteris
None to 0 or 1 if SBT Read Only N/A N/A
set
can to BASE_BOARD
In
and a be set to
PORTSECURITY
PT is set to ETH.or
E1_COVERBOARD
MO,
In
Nonethethis parameter
ETH_COVERBOARD Read Only N/A N/A
can be set to ETH MO,
PORTSECURITY or
ifE1T1
SN isif set
SBT toisaset
value
to
this
withinparameter
the rangecan of 0beto
BASE_BOARD.
set to a value within Read Only N/A N/A
5.
In arange
PORTSECURITY
the
In from 0 to 3 if
a PORTSECURITY
MO,
SBT this
is setparameter
to
MO, this
must parameter
be set to E1T1 if Read Only N/A N/A
BASE_BOARD
can be to and
set to
SBT
PT is set
is set to E1T1.
BASE_BOARD
E1_COVERBOARD. or
In the
ETH_COVERBOARD
In a PORTSECURITY Read Only N/A N/A
PORTSECURITY
ifMO,
SNthis
is set to 6 or MO,
7.
parameter
this parameter can be
must
set to a value within if
be set to ETH No (And no impact on
None
SBT is setfrom
to 0 to 7 if Read & Write N/A
the range the UE in idle mode)
ETH_COVERBOARD.
SBT is set to
E1_COVERBOARD
None Read & Write Yes BS
and
In thePTPPPLNK
is set to MO,E1T1.
In the PPPLNK
MAXMFLEN must be MO,
None
PORTSECURITY
larger than must MO,
MAXMFLEN be Read & Write Yes BS
this
MAXSFLEN and thebe
largerparameter
than can
set to a value
MAXSFLEN
minimum andwithin
difference theis
the Read & Write Yes BS
2. range difference
minimum from 0 to 5isif
SBT
In theisPPPLNK
2. set to MO,
ETH_COVERBOARD
In
this parameter isMO,
the PPPLNK valid
and Read & Write Yes BS
only PT
MRU is set
must
when beto
MUXCP ETH.
greateris
than
set toorENABLE.
equal to
MAXMFLEN.
In the PPPLNK MO,
this parameter is valid
only when MUXCP is
set to ENABLE.
In the PPPLNK MO,
this parameter is valid
Read & Write Yes BS
only when MUXCP is
In
setthe PPPLNK MO,
to ENABLE.
MRU must be greater
Read & Write Yes BS
than or equal to
MAXMFLEN.
None Read & Write Yes BS
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the PPPLNK MO,
FFDPHOLD must be No (And no impact on
Read & Write N/A
smaller than the UE in idle mode)
In the PPPLNK MO,
FFAPHOLD.
FFDPHOLD must be No (And no impact on
Read & Write N/A
smaller than the UE in idle mode)
In the RSCGRP MO,
FFAPHOLD.
this parameter is valid
Read Only N/A N/A
only when BEAR is set
to IP.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In an RSCGRPALG
No (And no impact on
MO, CCTTH must be Read & Write N/A
the UE in idle mode)
smaller than CTTH.
In an RSCGRPALG
No (And no impact on
MO, CCTTH must be Read & Write N/A
the UE in idle mode)
smaller than CTTH.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the SCTPLNK MO,
this parameter is valid
No (And no impact on
only when Read & Write N/A
the UE in idle mode)
AUTOSWITCH is set
to ENABLE. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
In a TACALG MO, the UE in idle mode)
TRMULHOCACTH
No (And no impact on
must be greater than Read & Write N/A
In the UE in idle mode)
or a
In a TACALG
TACALG
equal to MO,
MO,
TRMULHOCACTH
TRMDLHOCACTH
TRMULGOLDCACTH.
must No (And no impact on
must be
be greater
greater than
than Read & Write N/A
In
or a TACALG MO, the UE in idle mode)
or equal to
equal to
TRMDLHOCACTH
TRMULGOLDCACTH.
TRMDLGOLDCACTH.
must be greater than No (And no impact on
In a TACALG MO, Read & Write N/A
or equal to the UE in idle mode)
TRMULGOLDCACTH
TRMDLGOLDCACTH.
must be greater than No (And no impact on
In
or a TACALG
equal to MO, Read & Write N/A
the UE in idle mode)
TRMDLGOLDCACTH
TRMULSILVERCACT
must
H. be greater than No (And no impact on
or equal to Read & Write N/A
In a TACALG MO, the UE in idle mode)
TRMDLSILVERCACT
TRMULSILVERCACT
H.
H must be greater than No (And no impact on
In Read & Write N/A
or a
In a TACALG
TACALG
equal to MO,
MO, the UE in idle mode)
TRMULSILVERCACT
TRMDLSILVERCACT
TRMULBRONZECAC
H
H
TH.must
must be
be greater
greater than
than No (And no impact on
In Read & Write N/A
or a
or TACALG
equal
equal to
to MO, the UE in idle mode)
TRMDLSILVERCACT
TRMULBRONZECAC
TRMDLBRONZECAC
H
TH.
TH.must be greater than No (And no impact on
Read & Write N/A
or equal to the UE in idle mode)
TRMDLBRONZECAC
TH. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None
In the Read & Write N/A
the UE in idle mode)
CSFallBackBlindHoCfg
MO,
None
In the
InterRatHighestPri Read Only N/A N/A
CSFallBackBlindHoCfg
must be different from
MO,
InterRatLowestPri. No (And no impact on
InterRatHighestPri Read & Write N/A
In the the UE in idle mode)
must be different from
CSFallBackBlindHoCfg
InterRatSecondPri.
MO, No (And no impact on
Read & Write N/A
In the
InterRatHighestPri the UE in idle mode)
CSFallBackBlindHoCfg
must be different from
MO, InterRatLowestPri
InterRatSecondPri.
must be set to NULL if
InterRatSecondPri is
set to NULL.
MO,
InterRatHighestPri
must be different from
InterRatLowestPri.
In the
CSFallBackBlindHoCfg
MO, InterRatLowestPri
must be set to NULL if No (And no impact on
Read & Write N/A
InterRatSecondPri is the UE in idle mode)
set to NULL.
In the No (And no impact on
None Read & Write N/A
CSFallBackBlindHoCfg the UE in idle mode)
MO,
In the
InterRatSecondPri No (And no impact on
CSFallBackBlindHoCfg
None
In the Read & Write N/A
must be different from
MO, the UE in idle mode)
CSFallBackBlindHoCfg
In the
InterRatLowestPri
IdleCsfbHighestPri
MO, if
CSFallBackBlindHoCfg No (And no impact on
None
InterRatSecondPri
IdleCsfbHighestPri is
must be different from Read & Write N/A
MO, the UE in idle mode)
not
mustsetbetodifferent
NULL. from
IdleCsfbSecondPri.
IdleCsfbHighestPri
In the
IdleCsfbLowestPri. No (And no impact on
must Read & Write N/A
In thebe different from
CSFallBackBlindHoCfg the UE in idle mode)
IdleCsfbLowestPri.
MO, IdleCsfbLowestPri
CSFallBackBlindHoCfg
In the
must
MO, be set to NULL if No (And no impact on
CSFallBackBlindHoCfg Read & Write N/A
IdleCsfbSecondPri
IdleCsfbHighestPri is the UE in idle mode)
MO,
set
musttoIdleCsfbLowestPri
NULL.
be different from
must
In thebe set to NULL if
IdleCsfbSecondPri. No (And no impact on
Read & Write N/A
IdleCsfbSecondPri
CSFallBackBlindHoCfg is the UE in idle mode)
set
MO,to NULL.
In the
IdleCsfbSecondPri No (And no impact on
None Read & Write N/A
CSFallBackBlindHoCfg
must be different from the UE in idle mode)
MO,
IdleCsfbLowestPri if
IdleCsfbSecondPri No (And no impact on
None
IdleCsfbSecondPri is Read & Write N/A
must betodifferent the UE in idle mode)
not set NULL. from
IdleCsfbLowestPri if No (And no impact on
None
IdleCsfbSecondPri is Read & Write N/A
the UE in idle mode)
not set to NULL.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the
ENodeBCipherCap No (And no impact on
None Read & Write N/A
MO, the the UE in idle mode)
In the
PrimaryCipherAlgo,
ENodeBCipherCap No (And no impact on
SecondCipherAlgo, Read & Write N/A
MO, the the UE in idle mode)
ThirdCipherAlgo,and
In the
PrimaryCipherAlgo,
FourthCipherAlgo
ENodeBCipherCap No (And no impact on
SecondCipherAlgo,
parameters must be Read & Write N/A
MO, the UE in idle mode)
In tothe
ThirdCipherAlgo,and
setthe different values.
PrimaryCipherAlgo,
FourthCipherAlgo
ENodeBCipherCap No (And no impact on
SecondCipherAlgo,
parameters must be Read & Write N/A
MO, the UE in idle mode)
set tothe
ThirdCipherAlgo,and
different values.
PrimaryCipherAlgo,
FourthCipherAlgo No (And no impact on
SecondCipherAlgo,
parameters must be Read & Write N/A
the UE in idle mode)
ThirdCipherAlgo,and
set to different values.
FourthCipherAlgo No (And no impact on
None
parameters must be Read & Write N/A
the UE in idle mode)
set to different values.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the No (And no impact on
None
ENodeBIntegrityCap Read & Write N/A
the UE in idle mode)
MO, the
In the
PrimaryIntegrityAlgo, No (And no impact on
ENodeBIntegrityCap Read & Write N/A
SecondIntegrityAlgo, the UE in idle mode)
MO, the
and ThirdIntegrityAlgo
In the
PrimaryIntegrityAlgo,
parameters must be No (And no impact on
ENodeBIntegrityCap Read & Write N/A
SecondIntegrityAlgo,
set to different values. the UE in idle mode)
MO, the
and ThirdIntegrityAlgo
PrimaryIntegrityAlgo,
parameters must be No (And no impact on
Read & Write N/A
SecondIntegrityAlgo,
set to different values. the UE in idle mode)
and ThirdIntegrityAlgo
parameters must be No (And no impact on
None Read & Write N/A
set to different values. the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
OndurationTimerUnsy
nc must be smaller
than
Whenthe thevalue
IPMODEof
LongDrxCycleUnsync.
parameter is set to
For LTE TDD
IPV4(IPv4), cells, the
the
unit
When for
TceIpV4Addr the
the value
IPMODE of the
OndurationTimerUnsy
parameter
parameter must be is set to
nc No (And no impact on
set.parameter
IPV6(IPv6),
When the is PSF
the Read & Write N/A
while that
TceIpV6Addr for the value the UE in idle mode)
IPMODE parameter is
of the
parameter must
set to IPV6(IPv6), the be
LongDrxCycleUnsync No (And no impact on
set. When
TceIpV4Addr
In the CaMgtCfgthe MO, Read & Write N/A
parameter is SF. the UE in idle mode)
IPMODEvalue ofdoes not is
parameter
the parameter
Before
set
need to to comparing
IPV4(IPv4),
be set. the the
CarrAggrA4ThdRsrp No (And no impact on
periods
TceIpV6Addr specified by Read & Write N/A
must be greater than the UE in idle mode)
these
parameter parameters and
the value ofdoes not
whether
need to these
be set. No (And no impact on
CarrAggrA2ThdRsrp
None Read & Write N/A
parameters are the UE in idle mode)
effective, unify the
value units. No (And no impact on
None
If the value of the Read & Write N/A
the UE in idle mode)
FddTddInd parameter
in the Cell MO is No (And no impact on
None Read & Write N/A
CELL_TDD, the the UE in idle mode)
relationship between
the values of No (And no impact on
None Read & Write N/A
OndurationTimerUnsy the UE in idle mode)
nc and
LongDrxCycleUnsync No (And no impact on
None Read & Write N/A
must meet the the UE in idle mode)
following requirements;
This
In theparameter
None following is valid Read Only N/A N/A
only when
formula, the
x indicates
DlCompSwitch
the value of the No (And no impact on
parameter
In a CellDrxPara
LongDrxCycleUnsyncin the MO, Read & Write N/A
the UE in idle mode)
CellAlgoSwitch
the value ofdivided
parameter MOby of
the
10 corresponding
FddEnterDrxThd
and rounded down, cell
must No (And no impact on
is selected.
In abeCellDrxPara MO, Read & Write N/A
not
and y indicates
greater than the the the UE in idle mode)
the
value value
remainder of ofof the value
FddEnterDrxThd
FddExitDrxThd.
of the must No (And no impact on
In abeCellDrxPara MO, Read & Write N/A
not greater than
LongDrxCycleUnsync the the UE in idle mode)
the
value value
of of
parameter divided by
TddEnterDrxThdUl
FddExitDrxThd.
10. No (And no impact on
In a CellDrxPara MO, Read & Write N/A
must
If SA0 beis less
used, than
thethe the UE in idle mode)
the
value
In a value
of of
CellDrxPara MO,
value of
TddEnterDrxThdUl No (And no impact on
TddExitDrxThdUl.
the value of
LongDrxCycleUnsync Read & Write N/A
In
musta CellDrxPara
be less thanMO,
OndurationTimerUnsy the the UE in idle mode)
equals
the
value value
ofto x*4
of +
nc must where:
temp(y) be smaller if y = 0,
TddEnterDrxThdDl
TddExitDrxThdUl.
than the value oftemp No (And no impact on
temp
In a = 0; y
CellDrxPara = 2, Read & Write N/A
must be less thanMO,
LongDrxCycleUnsync. the the UE in idle mode)
=
the2;
value y = 4,oftemp = 2; y
value
of
For
= 5, LTE
tempTDD
TddEnterDrxThdDl= 2; cells,
y = 6,the No (And no impact on
TddExitDrxThdDl.
unit for the value ofthe
the Read & Write N/A
temp
must be = 3;less
y = than
8, temp the UE in idle mode)
OndurationTimerUnsy
= 4.
value of
nc
If parameter
SA1 is used,isthe
TddExitDrxThdDl. PSF No (And no impact on
None
while that for the value Read & Write N/A
value of the UE in idle mode)
of the
LongDrxCycleUnsync
LongDrxCycleUnsync
equals to x*6 + No (And no impact on
Read & Write N/A
parameter
temp(y) is SF.if y = 0,
where: the UE in idle mode)
Before
temp = comparing
0; y = 2, temp the
periods specified by No (And no impact on
= 2; y = 4, temp = 2; y Read & Write N/A
these parameters the UE in idle mode)
= 5, temp = 3; y = and 6,
whether these
temp = 4; y = 8, temp
parameters are No (And no impact on
None
= 5. Read & Write N/A
effective, unify the the UE in idle mode)
If SA2 is used, the
value
value units.
of For
None
details, see
LongDrxCycleUnsync Read Only N/A N/A
"Parameter
equals to x*8 +
Relationship"
temp(y) where: about
if y = 0, No (And no impact on
None
OndurationTimerUnsy Read & Write N/A
temp = 0; y = 2, temp the UE in idle mode)
nc.
= 2; y = 4, temp = 3; y
= 5, temp = 4; y = 6,
temp = 5; y = 8, temp
= 6.
If SA3 is used, the
value of
LongDrxCycleUnsync
effective, unify the
value units.
If the value of the
FddTddInd parameter
in the Cell MO is
CELL_TDD, the
relationship between
the values of No (And no impact on
None
OnDurationTimer and Read & Write N/A
the UE in idle mode)
LongDrxCycle
This parametermust is valid
meet
only
Nonewhen the following
the UL Read Only N/A N/A
requirements;
CoMP functionIf the
value
specified of the
by the
FddTddInd parameter No (And no impact on
UplinkCompSwitch Read & Write N/A
in the Cell MO is the UE in idle mode)
parameter in the
CELL_TDD,
CellAlgoSwitch MO and thefor
value
None
the of
corresponding cell Read Only N/A N/A
SupportShortDrx
is enabled. is
UU_ENABLE, the No (And no impact on
None
relationship between Read & Write N/A
the UE in idle mode)
the values of
OnDurationTimer and No (And no impact on
None
ShortDrxCycle also Read & Write N/A
the UE in idle mode)
must meet the
following requirements: No (And no impact on
None Read & Write N/A
In the following the UE in idle mode)
formula, x indicates
the value of the No (And no impact on
None Read & Write N/A
LongDrxCycle or the UE in idle mode)
ShortDrxCycle
parameter
None divided by Read Only N/A N/A
10 and rounded down,
and y indicates the No (And no impact on
None
remainder of the value Read & Write N/A
the UE in idle mode)
of the LongDrxCycle or
ShortDrxCycle
10(metric system); No (And no impact on
parameter Read & Write N/A
33(imperialdivided system)by the UE in idle mode)
10.
If SA0 is used, the
None
value of LongDrxCycle Read Only N/A N/A
or ShortDrxCycle
equals
None to x*4 + Read Only N/A N/A
This
temp(y) parameter
where: ifisy = 0,
invalid
temp =when 0; y = 2, temp
EnterDrxSwitch
=
If 2; y = 4, temp is
SupportShortDrx = 2;set
isy No (And no impact on
None Read & Write N/A
to
= 5,
set OFF.
totemp = 2; y = 6,
UU_ENABLE, the UE in idle mode)
In
temp
the avalue
DrxParaGroup
= 3; ofy = 8, temp
MO, No (And no impact on
= 4. the value of
LongDrxCycle must be Read & Write N/A
OnDurationTimer the UE in idle mode)
If
an SA1
This integeris used,
parametermultiple is must
the of
not
value be greater
of
ShortDrxCycle.
invalid when than
LongDrxCycle the No (And no impact on
value
or
This of
ShortDrxCycle
parameter is Read & Write N/A
EnterDrxSwitch is set the UE in idle mode)
LongDrxCycle.
equals
invalid
This
to OFF. to x*6 + For
when
parameter is
LTE
temp(y) TDD
EnterDrxSwitch
invalid when cells, ifthe
where: =unit
isyset 0, No (And no impact on
for
temp
to the
OFF. = value
0; y =of2, the
temp Read & Write N/A
EnterDrxSwitch is set the UE in idle mode)
OnDurationTimer
= 2;
In
to a
OFF.y = 4, temp = 2; y
DrxParaGroup
parameter
= 5, temp
MO, =is3;PSF
the value yof= 6, No (And no impact on
Read & Write N/A
while
temp = that
4; yfor= the
OnDurationTimer 8, tempvalue
must the UE in idle mode)
This
of
= 5.
not the
be parameter
LongDrxCycle
greater than is the
invalid
parameter
If SA2ofis
value when is SF.
used, the
ShortDrxCycle No (And no impact on
Read & Write N/A
EnterDrxSwitch
ifBefore
value ofcomparing
LongDrxCycle
SupportShortDrx is set
the
is the UE in idle mode)
to
set OFF.
periods specified by
or ShortDrxCycle
to UU_ENABLE.
these
equals parameters
x*8 +cells,and
toTDD No (And no impact on
For LTE the Read & Write N/A
whether
temp(y) these
where: if y = 0, the UE in idle mode)
unit
This parameter is the
for the value of
parameters
temp =when
0; y =
OnDurationTimer
invalid are2, temp No (And no impact on
effective,
= 2; y = 4,unify temp the
= 3; Read & Write N/A
parameter
EnterDrxSwitch is PSF is sety the UE in idle mode)
value
= 5,
while
to OFF. units.
temp
that =
forFor
4; y
the = 6,
value
details,
temp
of see
the=ShortDrxCycle
5; y = 8, temp
None
"Parameter
= 6.
parameter is SF. Read Only N/A N/A
Relationship" used,about
If SA3 iscomparing
Before the the
OnDurationTimer.
value of specified
periods LongDrxCycle by
or ShortDrxCycle
these parameters and
equals tothese
whether x*7 +
temp(y) where:
parameters are if y = 0,
temp
effective,= 0; unify
y = 2,the temp
= 2; y units.
value = 4, tempFor = 2; y
None Read Only N/A N/A
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In an No (And no impact on
None Read & Write N/A
InterRatHoCommGrou the UE in idle mode)
p MO, the value of
In an No (And no impact on
InterRatHoA1ThdRsrp Read & Write N/A
InterRatHoCommGrou the UE in idle mode)
must be greater than
p
orMO, thetovalue
equal of of
the value
In an No (And no impact on
InterRatHoA1ThdRsrq
InterRatHoA2ThdRsrp. Read & Write N/A
InterRatHoCommGrou the UE in idle mode)
must be greater than
p
orMO, thetovalue
equal of of
the value
In an No (And no impact on
InterRatHoA1ThdRsrp
InterRatHoA2ThdRsrq. Read & Write N/A
InterRatHoCommGrou the UE in idle mode)
must be greater than
p
orMO, thetovalue
equal of of
the value No (And no impact on
InterRatHoA1ThdRsrq
InterRatHoA2ThdRsrp. Read & Write N/A
the UE in idle mode)
must be greater than
or equal to the value of No (And no impact on
None
InterRatHoA2ThdRsrq. Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
This parameter is valid
only when No (And no impact on
Read & Write N/A
RlfTimerConstCfgInd the UE in idle mode)
is set to CFG.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None
This parameter is valid Read & Write N/A
the UE in idle mode)
only when the
SriAdaptiveSwitch No (And no impact on
Read & Write N/A
parameter in the the UE in idle mode)
GlobalProcSwitch MO
is set to OFF. No (And no impact on
None Read & Write N/A
the UE in idle mode)
This parameter is valid
only when No (And no impact on
Read & Write N/A
RlfTimerConstCfgInd the UE in idle mode)
is set to CFG.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In an No (And no impact on
None
InterFreqHoGroup MO, Read & Write N/A
the UE in idle mode)
the value of
1.
In The
an value of
InterFreqHoA1ThdRsr No (And no impact on
InterFreqHoA2ThdRsr
InterFreqHoGroup MO, Read & Write N/A
p must be greater than the UE in idle mode)
p
the
or must betoof
value
equal smaller
the than
value of
1. The
that of value of
InterFreqHoA1ThdRsr No (And no impact on
InterFreqHoA2ThdRsr
InterFreqHoA2ThdRsr Read & Write N/A
InterFreqHoA1ThdRsr
q
p. must be greater than the UE in idle mode)
q
ormust
p. equalbetosmaller than
the value of
that
2. In of
an
InterFreqHoA2ThdRsr No (And no impact on
InterFreqHoA1ThdRsr Read & Write N/A
InterFreqHoGroup
q. MO, the UE in idle mode)
q.
the value of
2. In an
InterFreqHoA1ThdRsr No (And no impact on
Read & Write N/A
InterFreqHoGroup
p must be larger than MO, the UE in idle mode)
the valuetoof
or equal
InterFreqHoA1ThdRsr
InterFreqHoA2ThdRsr No (And no impact on
None Read & Write N/A
q
p.must be larger than the UE in idle mode)
or equal to
InterFreqHoA2ThdRsr No (And no impact on
None Read & Write N/A
q. the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In an
InterFreqHoGroup MO, No (And no impact on
None Read & Write N/A
the value of the UE in idle mode)
In an
A3InterFreqHoA1ThdR
InterFreqHoGroup No (And no impact on
srp must be greaterMO, Read & Write N/A
the the UE in idle mode)
thanvalue of to the
or equal
A3InterFreqHoA1ThdR
value of No (And no impact on
srp must be greater
A3InterFreqHoA2ThdR Read & Write N/A
the UE in idle mode)
than
srp. or equal to the
value of No (And no impact on
None
A3InterFreqHoA2ThdR Read & Write N/A
the UE in idle mode)
srp.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_UM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_UM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_UM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_UM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_UM.
This parameter is valid
No (And no impact on
when RlcMode is set Read & Write N/A
the UE in idle mode)
to RlcMode_AM.
This parameter is valid No (And no impact on
Read & Write N/A
only for QCIs 6 to 9. the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
The sum of the UE in idle mode)
OpUlRbUsedRatio in
No (And no impact on
all CellOp MOs of the Read & Write N/A
The the UE in idle mode)
samesum cellof
cannot
OpDlRbUsedRatio
exceed 100. in
No (And no impact on
all CellOp MOs of the Read & Write N/A
the UE in idle mode)
same cell cannot
exceed 100.
None Read Only N/A N/A
This parameter is No (Modifications on
optional, depending on this parameter would
None
the setting of the Read & Write affect cell reselection N/A
SpeedDepReselCfgInd No (Modifications
of the UE in idle on
This parameter is this parameter would
parameter.
optional, depending on mode.)
None
If
In the
the CellResel MO, if Read & Write affect cell reselection N/A
the setting of No (Modifications
of the UE in idle on
SpeedDepReselCfgInd
SpeedDepReselCfgInd this
mode.)parameter would
parameter
is
. set to CFG, is set to
In the CellResel MO, if Read & Write affect cell reselection N/A
CFG, this
NCellChangeHigh
If parameter No (Modifications
SpeedDepReselCfgInd of the UE in idle on
must set.
be greater
SpeedDepReselCfgInd than this parameter would
is set mode.)
If
is theset to
to CFG,
NCellChangeMedium.
CFG, Read & Write affect cell reselection N/A
NCellChangeHigh
SpeedDepReselCfgInd
If
THystNormal must be No (Modifications
of the UE in idle on
This
must
parameterparameter
is setisthan
be greater
SpeedDepReselCfgInd to this parameter would
set.
optional, depending on mode.)
NCellChangeMedium.
NOT_CFG,
is
If set to CFG, this Read & Write affect cell reselection N/A
the
If setting
parameter
NCellChangeMediumof
does not No (Modifications
of the UE in idle on
SpeedDepReselCfgInd
This parameter
need
must
is set to
be
to be
set.set. is
SpeedDepReselCfgInd
SpeedDepReselCfgInd
NOT_CFG, this
mode.)parameter would
optional,
.is depending
set to CFG,does not on Read & Write affect cell reselection N/A
If
THystNormal
the setting of
If
NCellChangeHigh
SpeedDepReselCfgInd No (Modifications
of the UE in idle on
need to be set.
SpeedDepReselCfgInd
SpeedDepReselCfgInd this parameter would
must
is set be set.
to NOT_CFG, mode.)
.is
If set to CFG, Read & Write affect cell reselection N/A
NCellChangeMedium
If No (Modifications
QHystSfMedium
not need toismust
SpeedDepReselCfgInd
does
This parameter be of the UE in idle on
SpeedDepReselCfgInd
be
is set.
set to NOT_CFG, this
mode.)parameter would
set.
optional,
is depending
set to CFG, on Read & Write affect cell reselection N/A
If
NCellChangeHigh
the setting of
QHystSfHigh No (Modifications
UE in idle on
does not needmust
SpeedDepReselCfgInd
SNonIntraSearchCfgIn to bebe of the
this parameter will
set.
is
set.set to NOT_CFG, mode.)
d.
None
If Read & Write affect cell reselection N/A
QHystSfMedium
If does No (Modifications
SpeedDepReselCfgInd
not need to be set. of the UE in idle on
SNonIntraSearchCfgIn
is set to NOT_CFG, this
mode.)parameter would
d is set to CFG,
QHystSfHigh does not Read & Write affect cell reselection N/A
SNonIntraSearch No (Modifications
of the UE in idle on
need to be set. this parameter would
needs to be set. mode.)
None
If Read & Write affect cell reselection N/A
SNonIntraSearchCfgIn No (Modifications
of the UE in idle on
d is set to NOT_CFG, this
mode.)parameter will
None
SNonIntraSearch does Read & Write affect cell reselection N/A
No (Modifications
of the UE in idle on
not need to be set. this parameter would
mode.)
None Read & Write affect cell reselection N/A
This parameter is No (Modifications
of the UE in idle on
optional, depending on this
mode.)parameter would
the
None setting of Read & Write affect cell reselection N/A
PMaxCfgInd. No (Modifications
of the UE in idle on
If PMaxCfgInd is set to this
mode.)parameter would
CFG,parameter
This PMax must is be Read & Write affect cell reselection N/A
set.
optional, depending on No (Modifications
of the UE in idle on
If PMaxCfgInd
the setting of is set to this
mode.)parameter would
None
NOT_CFG, PMax
SIntraSearchCfgInd. Read & Write affect cell reselection N/A
does not need to be No (Modifications
of the UE in idle on
If SIntraSearchCfgInd
set. this
mode.)parameter would
is set to CFG,
Read & Write affect cell reselection N/A
SIntraSearch needs to
of the UE in idle
be set.
mode.)
If SIntraSearchCfgInd
is set to NOT_CFG,
SIntraSearch does not
need to be set.
This parameter is
optional, depending on
the setting of No (Modifications on
MeasBandWidthCfgIn this parameter would
d.
None Read & Write affect cell reselection N/A
If No (Modifications
of the UE in idle on
MeasBandWidthCfgIn this
mode.)parameter would
d is set to CFG, Read & Write affect cell reselection N/A
MeasBandWidth must No (Modifications
of the UE in idle on
be set. this
mode.)parameter would
This
None parameter is Read & Write affect cell reselection N/A
If
optional, depending on
MeasBandWidthCfgIn No (Modifications
of the UE in idle on
the setting
This of is
parameter this
mode.)parameter would
d is set to NOT_CFG,
SpeedStateSfCfgInd.
None
optional,
MeasBandWidthdepending on
does Read & Write affect cell reselection N/A
If
theSpeedStateSfCfgInd
setting of the No (Modifications
of the UE in idle on
not
is need
set to be set.
to CFG, this parameter would
SpeedStateSfCfgInd mode.)
TReselEutranSfMediu
parameter. Read & Write affect cell reselection N/A
mSpeedStateSfCfgInd
must be set. No (Modifications
of the UE in idle on
If
If this parameter would
is SpeedStateSfCfgInd
set to CFG, mode.)
is set to NOT_CFG, Read & Write affect cell reselection N/A
TReselEutranSfHigh No (Modifications
TReselEutranSfMediu of the UE in idle on
must be set. this parameter would
m does not need to be mode.)
If SpeedStateSfCfgInd
None Read & Write affect cell reselection N/A
set.
is set to NOT_CFG, No (Modifications
of the UE in idle on
TReselEutranSfHigh this
mode.)parameter would
does
None not need to be Read & Write affect cell reselection N/A
set. No (Modifications
of the UE in idle on
this
mode.)parameter would
None Read & Write affect cell reselection N/A
If QQualMinCfgInd is No (Modifications
of the UE in idle on
This
set toparameter
CFG, the is this parameter would
optional, depending on mode.)
following
None cell Read & Write affect cell reselection N/A
the setting of
reselection parameters No (Modifications
of the UE in idle on
ThrshServLowQCfgInd
in compliance with this
mode.)parameter would
.None Release 9 in
3GPP Read & Write affect cell reselection N/A
If
SIB3 will be No (Modifications
of the UE in idle on
ThrshServLowQCfgInd
set:SIntraSearchQ,SN this
mode.)parameter would
is
Thissetparameter
to CFG, this
onIntraSearchQ,SIntra is Read & Write affect cell reselection N/A
parameter
optional, must
depending be on No (Modifications
of the UE in idle on
Search,SNonIntraSear
set.and
the setting of this
mode.)parameter would
ch
1. QQualMin.
This parameter is
If
QQualMinCfgInd. Read & Write affect cell reselection N/A
If QQualMinCfgInd
dependingis No (Modifications
optional,
ThrshServLowQCfgInd
If QQualMinCfgInd ison of the UE in idle on
set
the to NOT_CFG,
setting of the this parameter would
is
set set
to to NOT_CFG,
CFG, mode.)
following cellthis is
HrpdCellReselectPara
This parameter Read & Write affect cell reselection N/A
this parameter
parameter
reselection must does
be
parameters No (Modifications
mCfgInd.
optional,
not need depending set. on
to bewith of the UE in idle on
set.
in compliance this parameter would
If
the setting of mode.)
This
If
3GPP
None parameter
Release 9isin is
QQualMinCfgInd Read & Write affect cell reselection N/A
HrpdCellReselectPara
SysTimeCfgInd.
This parameter
optional,
set to depending
NOT_CFG, is this on
SIB3 will is
notsetbeto No (Modifications
of the UE in idle on
mCfgInd
If
theSysTimeCfgInd
optional,
setting
parameter depending
of
does CFG,
is set
not on
set:SIntraSearchQ,SN
SpeedStateSfCfgInd this
mode.)parameter would
to
the CFG,
setting
HrpdParaCfgInd.
need to be of the
set.
onIntraSearchQ,SIntra
must be set. Read & Write affect cell reselection N/A
CdmaEutraSyn
HrpdCellReselectPara
If HrpdParaCfgInd must is No (Modifications
Search,SNonIntraSear
If of the UE in idle on
be set.
mCfgInd
set to CFG,parameter. this parameter would
ch and QQualMin.
HrpdCellReselectPara mode.)
If SysTimeCfgInd
the
HrpdCellReselectPara is set Read & Write affect cell reselection N/A
mCfgInd
to NOT_CFG, is set
HrpdCellReselectPara
mCfgInd must be set. to No (Modifications
of the UE in idle on
NOT_CFG,
CdmaEutraSyn
mCfgInd
If parameter
HrpdParaCfgInd doesis this parameter would
This
set toparameter
SpeedStateSfCfgInd
not need
CFG, to be
this is is
set. Read & Write
mode.)
affect cell reselection N/A
set to NOT_CFG,
optional,
does not depending
parameter need
musttobe
HrpdCellReselectPara be on No (Modifications
of the UE in idle on
the
set.
set. setting of this
mode.)parameter would
mCfgInd
This does not
2
If If parameter
SpeedStateSfCfgInd.
the
need to be set.
is Read & Write affect cell reselection N/A
optional,
If
This parameter is on
depending
SpeedStateSfCfgInd
SpeedStateSfCfgInd is No (Modifications
of the UE in idle on
HrpdCellReselectPara
the setting ofthe
is
set set
to to
optional,
mCfgInd CFG,
CFG,depending
parameter on
is this
mode.)parameter would
SpeedStateSfCfgInd.
TReselCdmaHprdSfHi
the setting
following of
parameters Read & Write affect cell reselection N/A
set
If to NOT_CFG,
SpeedStateSfCfgInd this No (Modifications
gh must be set. not
Cdma1XrttParaCfgInd.
must be
parameter set:does of the UE in idle on
is
If set to CFG,
SpeedStateSfCfgInd
TReselCdmaHrpdSfM this
mode.)parameter would
need to be set.
TReselCdmaHrpdSfM Read & Write affect cell reselection N/A
is set toand
NOT_CFG,
Cdma1XrttParaCfgInd
edium
edium must
TReselCdmaHprdSfHibe set. No (Modifications
of the UE in idle on
is set to CFG,
TReselCdmaHrpdSfHi
If
gh SpeedStateSfCfgInd
does not need to be this
mode.)parameter would
Cdma1XrttLongCodeS
gh.
is
set.set to NOT_CFG, Read & Write affect cell reselection N/A
tateCfgInd must be
If SpeedStateSfCfgInd
TReselCdmaHrpdSfM of the UE in idle
set.
is set to NOT_CFG,
edium does not need mode.)
If
the following
to be set.
Cdma1XrttParaCfgInd
parameters do not
is
needset to
to be
NOT_CFG,
set:
Cdma1XrttLongCodeS
TReselCdmaHrpdSfM
tateCfgInd
edium and does not
need to be set.
TReselCdmaHrpdSfHi
This parameter is
optional, depending on
the
Thissetting
parameterof is
Cdma1XrttParaCfgInd.
optional, depending on
If
the setting of theis
This parameter
Cdma1XrttParaCfgInd No (Modifications on
Cdma1XrttCellReselCf
optional, depending on
is setparameter.
gInd to CFG, this parameter would
the setting of
Cdma1XrttCellReselCf Read & Write affect cell reselection N/A
If theparameter is
This
Cdma1XrttCellReselCf
gInd mustdepending
be set. on No (Modifications
of the UE in idle on
Cdma1XrttCellReselCf
optional,
gInd.
If this
mode.)parameter would
gInd
the
If
This parameter
setting
parameterof is is set
Cdma1XrttParaCfgInd Read & Write affect cell reselection N/A
to CFG, this
Cdma1XrttSpeedStateparameter
Cdma1XrttCellReselCf No (Modifications
optional.
is set be Whether to
to NOT_CFG, of the UE in idle on
must
CfgInd.
gInd is setset.
to CFG,is this parameter would
set this parameter
Cdma1XrttCellReselCf mode.)
If the
Cdma1XrttSpeedState Read & Write affect cell reselection N/A
determined
gInd does not byneed
the to
Cdma1XrttCellReselCf
Cdma1XrttSpeedState
CfgInd
parameter must be set. No (Modifications
of the UE in idle on
be
gInd set.
CfgInd parameter is set
is set to CFG, this parameter would
If
Cdma1XrttSpeedState mode.)
to NOT_CFG,
Cdma1XrttSfMedium
Cdma1XrttCellReselCf
CfgInd. this Read & Write affect cell reselection N/A
parameter
must
gInd beset does
set. not No (Modifications
of the UE in idle on
Whenis to
need
If
NOT_CFG,to be set. this
mode.)parameter would
Cdma1XrttSpeedState
Cdma1XrttSpeedState
Cdma1XrttSpeedState Read & Write affect cell reselection N/A
CfgInd is set to CFG,
CfgInd
CfgInd is set not
does to need of the UE in idle
Cdma1XrttSfHigh
NOT_CFG,
to be set. mode.)
needs
None to be set. Read Only N/A N/A
Cdma1XrttSfMedium
When No (Modifications on
does not need to be
Cdma1XrttSpeedState this parameter would
set.
This
Noneparameter
CfgInd is set to is Read & Write affect cell reselection N/A
optional,
NOT_CFG, depending on No (Modifications
of the UE in idle on
the setting
Cdma1XrttSfHigh of does this
mode.)parameter would
This
None parameter
SpeedStateSfCfgInd.
not need to be set. is Read & Write affect cell reselection N/A
optional, depending on
If SpeedStateSfCfgInd No (Modifications
of the UE in idle on
the
is setsetting
to CFG, of this
mode.)parameter would
SpeedStateSfCfgInd.
TReselGeranSfMediu Read & Write affect cell reselection N/A
If
mSpeedStateSfCfgInd
must be set. No (Modifications
of the UE in idle on
is set to CFG,
If SpeedStateSfCfgInd this
mode.)parameter would
TReselGeranSfHigh
is set to NOT_CFG, Read & Write affect cell reselection N/A
must be set.
TReselGeranSfMediu of the UE in idle
If
mSpeedStateSfCfgInd
does not need to be mode.)
None
is
set.set to NOT_CFG, Read Only N/A N/A
TReselGeranSfHigh No (Modifications on
This
doesparameter
not need tois be this parameter would
None
optional,
set. depending on Read & Write affect cell reselection N/A
the setting of the No (Modifications
of the UE in idle on
This parameter is
SpeedStateSfCfgInd this
mode.)parameter would
None
optional,
parameter. depending on Read & Write affect cell reselection N/A
the setting of the No (Modifications
of the UE in idle on
If SpeedStateSfCfgInd
SpeedStateSfCfgInd this
mode.)parameter would
is set to CFG,
parameter. Read & Write affect cell reselection N/A
TReselUtranSfMedium No (Modifications
If SpeedStateSfCfgInd of the UE in idle on
must be set. this parameter would
is set to CFG, mode.)
If SpeedStateSfCfgInd Read & Write affect cell reselection N/A
TReselUtranSfHigh
is set to NOT_CFG, of the UE in idle
must be set.
TReselUtranSfMedium mode.)
If SpeedStateSfCfgInd
does
None not need to be Read Only N/A N/A
is
set.set to NOT_CFG, No (Modifications on
TReselUtranSfHigh this parameter would
does
None not need to be Read & Write affect cell reselection N/A
set. No (Modifications
of the UE in idle on
this
mode.)parameter would
None Read & Write affect cell reselection N/A
This parameter is of
Nothe UE in idle on
(Modifications
optional, depending on mode.)
this parameter would
None Read & Write N/A
the setting of affect cell selection of
QQualMinOffsetCfgInd No
the (Modifications on
UE in idle mode.)
.None this parameter would
Read & Write N/A
If affect cell selection of
No
the (Modifications on
UE in idle mode.)
QQualMinOffsetCfgInd
this parameter would
is set to CFG, this Read & Write N/A
affect cell selection of
parameter must be
the UE in idle mode.)
set.
None
If Read Only N/A N/A
QQualMinOffsetCfgInd
is set to NOT_CFG,
this parameter does
not need to be set.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None
If Read & Write N/A
the UE in idle mode)
TimingAdvCmdOptSwi
tch is set to ON,
None
TACmdSendPeriod Read Only N/A N/A
can be configured only
when the GUI value is No (And no impact on
Read & Write N/A
Invalid or less than or the UE in idle mode)
equal to the
enumerated value in
the following formula:
Floor(TimeAlignmentTi
mer/2-32).
both
or
rns 8T8R.
30~811;can setbe to set to
CrsPortNum
EXTENDED_CP, are set to
In a
SSP3, Cell MO,4T4R,
SSP4,
(3) 1500m(4921ft)
CELL_TDD, ifSSP5, < or
SpecialSubframePatte
FddTddInd,
SSP6;
CellRadius <=
and
rns CRS_PORT_1,
(3) Ifcan
CellActiveState, be set tothe is
UlCyclicPrefix
2000m(6562ft):
respectively,
SSP3, SSP4,ofSSP5,
MultiRruCellFlag, or
set
value to range
CrsPortMap
SSP6;
EXTENDED_CP must and be
MultiRruCellMode
and DlCyclicPrefix
RootSequenceIdx
set NOT_CFG. isis are
is
(3)
set Ifto UlCyclicPrefix
toCell
36~804; NORMAL_CP,
In
set a to MO, if
EXTENDED_CP
CELL_TDD,CELL_AC
SpecialSubframePatte
(4) 2000m(6562ft)
FddTddInd, <
None
and
TIVE,
rns DlCyclicPrefix
can
CellRadius be set<= to is Read Only N/A N/A
TxRxMode,
set to NORMAL_CP, and
BOOLEAN_TRUE,
SSP4,
2600m(8530ft):
CrsPortNum SSP5,are SSP6,
the
set to or
SpecialSubframePatte
and
SSP7;
value SFN,range respectively,
of No (And no impact on
CELL_TDD,
None
rns 8T8R, Read & Write N/A
(4) Ifcan
TxRxMode be setmust
UlCyclicPrefix
RootSequenceIdx
and CRS_PORT_1,
to beisis set the UE in idle mode)
SSP4,
to
set 4T4R.
to
42~797; SSP5,
NORMAL_CP SSP6, or
respectively,
SSP7;
In
and
(5) a2600m(8530ft)
Cell MO, if
DlCyclicPrefix <is No (And no impact on
CrsPortMap
None
(4) IftoUlCyclicPrefix must beis Read & Write N/A
CellActiveState,
set
CellRadius <= the UE in idle mode)
set
set to NOT_CFG.
to NORMAL_CP
MultiRruCellFlag,
EXTENDED_CP,
3500m(11483ft):
In a Cell MO, if the and
and DlCyclicPrefix
MultiRruCellMode
SpecialSubframePatte
value is
are No (And no impact on
None range of
FddTddInd, Read & Write N/A
set
rns to
can CELL_ACTIVE,
RootSequenceIdx be set to the UE in idle mode)
TxRxMode,
EXTENDED_CP, and is
BOOLEAN_TRUE,
SSP3,
52~786;
CrsPortNum SSP4,are SSP5, set to or
SpecialSubframePatte
and
SSP6. No (And no impact on
None
(6) 3500m(11483ft)
CELL_TDD, 4T4R, < Read & Write N/A
rns acan be set the UE in idle mode)
TWO_RRU_COMBINA
In Cell
CellRadius
and MO,
CRS_PORT_2, <=ifto
SSP3,
TION,
TxRxMode SSP4,
respectively,
4300m(14107ft): is set SSP5, to or
the
respectively,
SSP6. No (And no impact on
None
TxRxMode
2T8R,
value range ofboth must be set Read & Write N/A
CrsPortMap
In a Cell MO,must ifandbe the UE in idle mode)
to 2T2R.
UlCyclicPrefix
RootSequenceIdx
set to NOT_CFG, is
TxRxMode
In a Cell MO,
DlCyclicPrefix
64~779; is set
ifmust to be No (And no impact on
4T2P_0011,
None
2T8R, both Read & Write N/A
CellActiveState,
set to NORMAL_CP.
(7) 4300m(14107ft)
4T2P_0101, or < the UE in idle mode)
UlCyclicPrefix
MultiRruCellFlag,
In a Cell MO,
CellRadius <=ifandand
4T2P_0110.
DlCyclicPrefix must be
MultiRruCellMode
TxRxMode
5500m(18044ft):
In atoCell MO, is set
if the toare
set NORMAL_CP.
CELL_ACTIVE, Read & Write Yes Cell
4T8R,
value
FddTddInd, both of
range
In a Cell MO, ifand is
BOOLEAN_TRUE,
UlCyclicPrefix
RootSequenceIdx
TxRxMode,
TxRxMode and
76~765; isare
and
DlCyclicPrefix
CrsPortNum
set must to
set be to Read & Write Yes Cell
4T8R, to both
DIGITAL_COMBINATI
set NORMAL_CP.
(8) 5500m(18044ft) <
CELL_TDD,
UlCyclicPrefix 8T8R,
ON,
In the
CellRadius
and respectively,
Cell MO,
CRS_PORT_2, <= and if
No (And no impact on
DlCyclicPrefix
TxRxMode
FddTddInd
None
6800m(22309ft): must
is must thebe
be set Read & Write N/A
respectively,
set to NORMAL_CP. the UE in idle mode)
to 1T1R
CELL_TDD
When
value
CrsPortMap the
rangeor 2T2R.
and
FddTddInd
of
must be
In the
a Cell
DlBandWidth
is set Cell
to
RootSequenceIdx MO,MO,
CELL_FDD ifis if is
set to
FddTddInd NOT_CFG, is is
CellActiveState
CELL_BW_N25,
and
90~747; AirCellFlag
8T2P_00001111, in set
Cell Read & Write Yes Cell
CELL_TDD
to
MO CELL_ACTIVE
UlCyclicPrefix
is set
(9) 6800m(22309ft) to and and and
8T2P_00110011,
DlBandWidth ismust or<
TxRxMode
DlCyclicPrefix
BOOLEAN_TRUE,
CellRadius
8T2P_01010101. is set
<= to be
None
CELL_BW_N25,
8T8R,
set neither Read & Write Yes Cell
In
ThisaNORMAL_CP.
DlBandWidth
8600m(28215ft):
Cell MO, ifand
parameter the
needs
and
UlCyclicPrefix
If MultiRruCellFlag
UlBandWidth
value
FddTddInd, range ofmustnor in
bea
to beMO specified
DlCyclicPrefix
Cell is set onlybe
must
can
to be
set to a
RootSequenceIdx
TxRxMode, value and is of
in one No (And no impact on
when
set the middle-
NORMAL_CP.
to
BOOLEAN_TRUE and Read & Write N/A
the following
116~731;
CrsPortNum areissetintoa the UE in idle mode)
priority
If blocking
MultiRruCellFlag
EXTENDED_CP.
MultiRruCellMode in a<
combinations(DlBand
(10)
CELL_TDD, 8600m(28215ft) 4T4R,
performed.
Cell
In
Cella MO
Cell
MO is
MO,
is set
set if to
to No (And no impact on
Width/UlBandWidth):
CellRadius
None
and CRS_PORT_4,and<= Read & Write N/A
BOOLEAN_TRUE
CellActiveState
the Cell MO, ifis set
DIGITAL_COMBINATI
CELL_BW_N15/
10600m(34776ft):
In the the UE in idle mode)
EmergencyAreaId
respectively, is
MultiRruCellMode
to
ON, CELL_ACTIVE
value
FddTddInd DlCyclicPrefix
CELL_BW_N15; range isof in
and
and a
optional,
CrsPortMap depending
must be on
Cell
TxRxMode MO
UlCyclicPrefix
CELL_BW_N15/CELL
RootSequenceIdx is set
is set to
in to
Cell
CELL_TDD
the
set setting
to NOT_CFG, ofand is Read & Write Yes Cell
DIGITAL_COMBINATI
8T8R,
MO must HighSpeedFlag
be set
_BW_N25;
136~706;
DlBandWidth
EmergencyAreaIdCfgI
4T4P_0213, is to
ON,
must
When
NORMAL_CP.DlCyclicPrefix
be the
CELL_BW_N15/CELL
(11) set to
AirCellFlag
10600m(34776ft) and
CELL_BW_N25,
nd.
4T4P_0231, No (And no impact on
UlCyclicPrefix
LOW_SPEED
in
None
In Cell
a
_BW_N50; Cell
< CellRadius or
CPRICompressionMO MO, is if
<= in
or Cell Read & Write N/A
If
4T4P_0123, the UE in idle mode)
MO must
HIGH_SPEED.
BOOLEAN_TRUE,
CellActiveState
CELL_BW_N25/CELL
13200m(43307ft):
must be set be setistoset thethe
EmergencyAreaIdCfgI
4T4P_0132.
NORMAL_CP.
In
to a
range Cell of
CELL_ACTIVE
_BW_N15;
value range
NO_COMPRESSION. MO,
the if
ofif and
nd
In aisCellset to CFG,
MO, No (And no impact on
In a
TxRxMode Cell
CellActiveState
UePowerMax
CELL_BW_N25/CELL
RootSequenceIdx
In the Cell MO, ifisifis
is set
MO, - tois Read & Write N/A
EmergencyAreaId
FddTddInd, the UE in idle mode)
No (Modifications on
CellActiveState
CELL_ACTIVE,
27~36.
8T8R,
_BW_N25;
168~676;
FddTddInd neither is is set
must
TxRxMode, be set. and and this parameter would
to
WhenCELL_ACTIVE
FddTddInd
UlCyclicPrefixthe AirCellFlag
CELL_BW_N25/CELL
(12)
CELL_TDD isand
13200m(43307ft) set norsetto to
If
CrsPortNum
None are Read & Write affect cell reselection N/A
TxRxMode
CELL_FDD,
in Cell
DlCyclicPrefix
_BW_N50; MO
< CellRadius8T8R,
DlBandWidth is
is set
and
not
is be
<= can to
EmergencyAreaIdCfgI
CELL_TDD, No (Modifications
of the UE in idle on
8T8R,
BOOLEAN_TRUE,
set to neither
CPRICompression
CELL_BW_N50/CELL
17200m(56430ft):
CELL_BW_N50 orthe is
the
nd
and isCRS_PORT_4,
set to NOT_CFG, this
mode.)parameter would
UlCyclicPrefix
set
range to
EXTENDED_CP.
_BW_N15;
value
CELL_BW_N100, of
rangethe of nor
EmergencyAreaId
respectively, Read & Write affect cell reselection N/A
DlCyclicPrefix
NORMAL_COMPRES
UePowerMax ifiscan be
In a Cell not MO,
CELL_BW_N50/CELL
RootSequenceIdx
CPRICompression
does
CrsPortMap need must to- be is
be can of the UE in idle
set
SION
30~33.to
FddTddInd,
_BW_N25;
204~602;
be set or
to
set.
set to NOT_CFG, mode.)
EXTENDED_CP.
ENHANCED_COMPR
If UePowerMaxCfgInd
MultiRruCellFlag
CELL_BW_N50/CELL
(13) 17200m(56430ft)
NO_COMPRESSION and Read & Write Yes Cell
8T4P_00112233,
In a Cell MO, if or
ESSION,
is set to
MultiRruCellMode CFG,
< CellRadius <= are
_BW_N50;
or
8T4P_01230123. TxRxMode
FddTddInd,
must
UePowerMax be set
set atoCell
CELL_BW_N100/CEL
21500m(70537ft):
NORMAL_COMPRES
In
MultiRruCellFlag MO,toifmust
CELL_FDD, 1T1R,
and
thebe
1T2R,
set.
BOOLEAN_TRUE
L_BW_N25;
value
SION,
FddTddInd, 2T2R,
range
if of2T4R,
DlBandWidth and Read & Write Yes Cell
MultiRruCellMode
4T4R,
If
SFN,
is UePowerMaxCfgInd
other 2T8R,
respectively,
CELL_BW_N100/CEL
RootSequenceIdx values, or 4T8R. are
is
TxRxMode,
set to CELL_FDD, and
In
is set
a Cell
to
DlCyclicPrefix
L_BW_N50.
264~566;
CPRICompression
CrsPortNum NOT_CFG,
MO, if
are and set to
BOOLEAN_TRUE
CellActiveState,
UePowerMax
UlCyclicPrefix
In
(14)
musta Cell MO,4T4R,
21500m(70537ft)
be set mustand
ifdoes not
be Read & Write Yes Cell
CELL_FDD,
SFN, respectively,
MultiRruCellFlag,
need
set
AirCellFlag
< to be set.
toCRS_PORT_2,
NORMAL_CP.
CellRadius
NO_COMPRESSION.
and is <=
set to and
DlCyclicPrefix
MultiRruCellMode
In a Cell
BOOLEAN_TRUE,
27800m(91206ft):
In the Cell MO,MO, and
if are
the
respectively,
UlCyclicPrefix must be
set to CELL_ACTIVE,
SubframeAssignment
RootSequenceIdx
value rangeisof
FddTddInd
CrsPortMap must be
set
set
must to
BOOLEAN_TRUE,
to beNORMAL_CP.
SA2,
RootSequenceIdx
CELL_FDD set to
and is a value
set
In atoCell NOT_CFG,
MO,or
and
DlCyclicPrefixand
smaller
328~498;
DlBandWidth
4T2P_0011, than is equal
SubframeAssignment
CELL_COMBINATION
UlCyclicPrefix
to
(15)69.
CELL_BW_N6
4T2P_0101,27800m(91206ft) ormust or be
,set
When
< to SA2,
respectively,
set to NORMAL_CP
CellRadius
CELL_BW_N15,
4T2P_0110. the AirCellFlag
<=
DlCyclicPrefixand
FddTddInd and
WorkMode are set to
CELL_FDD and
DL_ONLY,
respectively,
DlBandWidth must be
set to CELL_BW_N25,
CELL_BW_N50,
CELL_BW_N75, or Read & Write Yes Cell
CELL_BW_N100.
In a Cell MO, No (And no impact on
None
WorkMode must be set Read & Write N/A
the UE in idle mode)
to UL_DL if FddTddInd
is set to CELL_TDD.
None
In a Cell MO, if Read & Write Yes Cell
FreqBand is set to 29,
WorkMode
None must be set Read Only N/A N/A
to DL_ONLY.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
If the LowPwrOrder
parameter is set to No (And no impact on
None the StartTime
OFF, Read & Write N/A
the UE in idle mode)
If
If the
the LowPwrOrder
parameter must be
parameter
set. is set to
BakPwrSavPolicy No (And no impact on
OFF, the StopTime Read & Write N/A
If the LowPwrOrder
parameter is set to the UE in idle mode)
parameter
parameter
CUSTOMIZED, must be
is setthe
to
If the
set. No (And no impact on
ON, the StartTime
CellUsedPwrReduceTi Read & Write N/A
BakPwrSavPolicy
If the LowPwrOrder the UE in idle mode)
parameter
meLen
parameter does
parameter
is set not
to
parameter
need
must
If the to
be be is
set. set
set. to
CUSTOMIZED,
ON, the StopTime the No (And no impact on
If the
BakPwrSavPolicy
RsPwrReduceTimeLen Read & Write N/A
parameter does not the UE in idle mode)
BakPwrSavPolicy
parameter
parameter is set be
must to
need
If the to
parameter be
CUSTOMIZED, set.
is not set to
the
set. No (And no impact on
BakPwrSavPolicy
CUSTOMIZED,
RfShutDownTimeLen the Read & Write N/A
If the the UE in idle mode)
parameter is set be
CellUsedPwrReduceTi
parameter must
BakPwrSavPolicy to
If the
CUSTOMIZED,
meLen
set. parameter the No (And no impact on
parameter is not set to
BakPwrSavPolicy Read & Write N/A
CellUsedPwrRatio
does
If the not need tothe
CUSTOMIZED, be the UE in idle mode)
parameter
parameter
set. is set be
must
BakPwrSavPolicy to
RsPwrReduceTimeLen
CUSTOMIZED,
set.
parameter
parameter is notthe
does set to
not Read & Write
No (And no impact on
N/A
RsPwrAdjOffset
If the
CUSTOMIZED, the the UE in idle mode)
need to
parameter be set.
must be
BakPwrSavPolicy
RfShutDownTimeLen
set.
parameter
parameter is not not
does set to No (And no impact on
Read & Write N/A
If the to be set. the
CUSTOMIZED,
need the UE in idle mode)
BakPwrSavPolicy
CellUsedPwrRatio
parameter
parameter is not not
does set to
CUSTOMIZED,
need to be set. the
RsPwrAdjOffset
parameter does not
need to be set.
If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
EnterTimeLen
parameter must be
set. No (And no impact on
Read & Write N/A
If the the UE in idle mode)
BakPwrSavPolicy
In the CellMro MO, if
parameter
None is not set
CioAdjLimitCfgInd is to Read Only N/A N/A
CUSTOMIZED,
set to CFG, the
EnterTimeLen
In the CellMro MO,must if
CioAdjLowerLimit No (And no impact on
parameter
be smaller does
None than notis
CioAdjLimitCfgInd Read & Write N/A
need the UE in idle mode)
set to to be set.
CFG,
CioAdjUpperLimit.
CioAdjLowerLimit
If CioAdjLimitCfgInd mustis No (And no impact on
be Read & Write N/A
set smaller
to CFG,than the UE in idle mode)
CioAdjUpperLimit.
CioAdjUpperLimit must
If
beCioAdjLimitCfgInd
set. is No (And no impact on
Read & Write N/A
set to CFG,
If CioAdjLimitCfgInd is the UE in idle mode)
In
setthe CellRacThd must
CioAdjLowerLimit
to NOT_CFG, MO,
GoldServiceArpThd
be set.CellRacThd does
CioAdjUpperLimit No (And no impact on
In the MO, Read & Write N/A
must
If
not be smaller
CioAdjLimitCfgInd
need to be set.than is the UE in idle mode)
the
In sum
the of
CellRacThd
SilverServiceArpThd. MO,
set to NOT_CFG,
NewCopperServiceOff
GoldServiceArpThd
CioAdjLowerLimit does No (And no impact on
In
set the
and CellRacThd
Qci1HoThd MO, Read & Write N/A
must
not be
need smaller
to be than
set. the UE in idle mode)
the
must sum
be of
smaller
SilverServiceArpThd. than
NewCopperServiceOff
or equal to 100. No (And no impact on
In Read & Write N/A
In the
set andCellRacThd
the Qci2HoThdMO,
CellRacThd MO, the UE in idle mode)
the
the sum of
must sum
be smaller than
of
NewCopperServiceOff
or
In equal
the to 100.
CellRacThd
Qci1CongThd and MO, No (And no impact on
In
set the
andCellRacThd
Qci3HoThd MO, Read & Write N/A
In the CellRacThd
NewSilverServiceOffse
CongRelOffset must MO, the UE in idle mode)
the
must
tthe sum
be
sum
must of
smaller
beofsmaller than
than
be smaller than
NewCopperServiceOff
or equal to
Qci2CongThd
or equal
Qci1HoThd. to 100. and No (And no impact on
set andCellRacThd
Qci4HoThd Read & Write N/A
In the
CongRelOffset
NewCopperServiceOff must MO, the UE in idle mode)
must
the be of
sum
be smaller
set. smaller
than than
or equal
Qci3CongThd
Qci2HoThd.
In the to 100.
CellRacThd and MO, No (And no impact on
In
In the
the CellRacThd
CellRacThd MO,
MO, Read & Write N/A
In the CellRacThd
CongRelOffset
the sum of must MO, the UE in idle mode)
NewGoldServiceOffset
NewGoldServiceOffset
the sum of
be smaller than than
NewCopperServiceOff
must be
must be smaller
Qci4CongThd
Qci3HoThd. smaller andthan No (And no impact on
set
or and
equal Qci1HoThd Read & Write N/A
or equal toto
CongRelOffset must the UE in idle mode)
must be smaller than
NewSilverServiceOffse
NewSilverServiceOffse
be
or smaller
equal to than
100.
t.
t.
Qci4HoThd. No (And no impact on
In the
the CellRacThd
CellRacThd MO, MO, Read & Write N/A
In the UE in idle mode)
the sum of
NewSilverServiceOffse
NewCopperServiceOff
In the CellRacThd
t must be smaller than MO, No (And no impact on
In Read & Write N/A
or the
set
the and
sum
equalCellRacThd
Qci2HoThd
of
to MO, the UE in idle mode)
the
must sum
be of
Qci2CongThd smaller
NewCopperServiceOff andthan
Qci1CongThd
In
set.the
or equalCellRacThd
to 100.
CongRelOffset and
must MO, No (And no impact on
Read & Write N/A
CongRelOffset
be smaller thanmust
the
In sum
the of
CellRacThd MO, the UE in idle mode)
be
the smaller
Qci3CongThd
sum
Qci2HoThd. of than and
In the No (And no impact on
the CellRacThd
Qci1HoThd.
CongRelOffset
NewCopperServiceOff
In CellRacThd must MO,
MO, Read & Write N/A
the
be sum
smallerof the UE in idle mode)
setthe
the
In and
sum of than MO,
Qci3HoThd
CellRacThd
Qci4CongThd
Qci3HoThd.
must be smaller
Qci2CongThd and
and
SilverGbrCongProporti than
CongRelOffset must No (And no impact on
In
or the
equalCellRacThd
to
CongRelOffset
on 100.
must be greater must MO, Read & Write N/A
be smaller than the UE in idle mode)
the
In
than sum
the of
CellRacThd
be smaller
or equalthanto MO,
Qci4HoThd.
Qci3CongThd
the sum of
CopperGbrCongPropo and No (And no impact on
In the
the CellRacThd
CongRelOffset
NewCopperServiceOff
In
rtion. CellRacThd must MO,
MO, Read & Write N/A
the UE in idle mode)
the
setthesum of
GoldGbrCongProportio
be smaller than
andCellRacThd
Qci4HoThdMO,
GoldGbrCongProportio
In
Qci4CongThd
n
n must
themustbebe
sum besmaller
of and
greater
CopperGbrCongPropo
must greater than
than
than No (And no impact on
CongRelOffset
or equal
rtion. to 100. must Read & Write N/A
or equal to
Qci2CongThd and the UE in idle mode)
be smaller thanmust
SilverGbrCongProporti
SilverGbrCongProporti
CongRelOffset
CopperGbrCongPropo
on.
on.smaller than
be No (And no impact on
rtion. Read & Write N/A
In the CellRacThd MO,
CopperGbrCongPropo the UE in idle mode)
SilverGbrCongProporti
rtion.
on must be greaterMO, No (And no impact on
In the CellRacThd Read & Write N/A
than the UE in idle mode)
the sum of to MO,
In theor equal
CellRacThd
CopperGbrCongPropo
GbrRbUsedHighThd
Qci3CongThd and
rtion. No (And no impact on
must be greatermust
CongRelOffset than Read & Write N/A
the UE in idle mode)
or
be equal
smallerto than
GbrRbUsedLowThd.
CopperGbrCongPropo
rtion.
In the CellRacThd MO,
the sum of
Qci4CongThd and
CongRelOffset must
CongRelOffset must
be smaller than
Qci2HoThd.
In the CellRacThd MO,
the sum of
Qci3CongThd and MO,
In the CellRacThd
CongRelOffset
GbrRbUsedHighThd must
be smaller than No (And no impact on
must be greater than Read & Write N/A
Qci3HoThd. the UE in idle mode)
or equal to
In the CellRacThd MO,
GbrRbUsedLowThd.
the sum of No (And no impact on
None Read & Write N/A
Qci4CongThd and the UE in idle mode)
CongRelOffset must
No (And no impact on
be smaller than Read & Write N/A
the UE in idle mode)
Qci4HoThd.
In the CellRacThd MO, No (And no impact on
None
the sum of Read & Write N/A
the UE in idle mode)
Qci2CongThd and MO,
In the CellRacThd
CongRelOffsetmust
UlRbHighThd mustbe No (And no impact on
be smaller than Read & Write N/A
greater than the UE in idle mode)
In the CellRacThd MO,
CopperGbrCongPropo
UlRbLowThd.
DlRbHighThd
rtion. must be No (And no impact on
Read & Write N/A
greater than
In the CellRacThd MO, the UE in idle mode)
In
thethe CellRacThd
DlRbLowThd.
sum of MO,
UlRbHighThd
Qci3CongThd and be
must No (And no impact on
Read & Write N/A
greater than must
CongRelOffset the UE in idle mode)
In
bethe CellRacThd
UlRbLowThd.
smaller than MO,
DlRbHighThd must be
CopperGbrCongPropo No (And no impact on
Read & Write N/A
greater
rtion. than the UE in idle mode)
DlRbLowThd.
In the CellRacThd MO, No (And no impact on
None
the sum of Read & Write N/A
the UE in idle mode)
Qci4CongThd and
CongRelOffset must No (And no impact on
None
be smaller than Read & Write N/A
the UE in idle mode)
CopperGbrCongPropo
rtion. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None
In the CellShutdown Read & Write N/A
the UE in idle mode)
MO, the sum of
DlPrbThd and No (And no impact on
In the CellShutdown Read & Write N/A
DlPrbOffset must be the UE in idle mode)
MO, thethan
smaller sumorof equal
DlPrbThd
to 100. and No (And no impact on
In the CellShutdown Read & Write N/A
DlPrbOffset must be the UE in idle mode)
MO, thethan
smaller sumorof equal
UlPrbThd
to 100. and No (And no impact on
In the CellShutdown Read & Write N/A
UlPrbOffset must be the UE in idle mode)
MO, thethan
smaller sumorof equal
UlPrbThd
to 100. and No (And no impact on
Read & Write N/A
UlPrbOffset must be the UE in idle mode)
smaller than or equal
to 100.
None Read Only N/A N/A
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None
In the CellDlschAlgo Read & Write N/A
the UE in idle mode)
MO,
OtherServiceWeight No (And no impact on
Read & Write N/A
must be greater than the UE in idle mode)
or equal to
BtServiceWeight. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
In
In the
the CellMLB
None CellMLB MO,
MO, Read & Write N/A
the the UE in idle mode)
the sum of
sum of
InterFreqMlbThd
IntraFreqMlbThd andand No (And no impact on
LoadOffset Read & Write N/A
LoadOffset must
must be
be the UE in idle mode)
smaller
smaller than
than or
or equal
equal
to
to 100.
100. No (And no impact on
None
In the CellMLB MO, Read & Write N/A
the UE in idle mode)
the sum of
InterRatMlbThd and No (And no impact on
Read & Write N/A
LoadOffset must be the UE in idle mode)
smaller than or equal
to 100. No (And no impact on
None Read & Write N/A
In the CellMLB MO, the UE in idle mode)
the sum of
InterRatLoadEvalPrd
IntraFreqMlbThd and No (And no impact on
must be greater than Read & Write N/A
LoadOffset the UE in idle mode)
or equal to must be
smaller than or equal
InitValidPeriod. No (And no impact on
In
to a
None CellMLB MO, the
100. Read & Write N/A
sum of the UE in idle mode)
InterFreqMlbUeNumTh
No (And no impact on
d and Read & Write N/A
the UE in idle mode)
MlbUeNumOffset must
be less than or equal No (And no impact on
None
to 10000. Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
None
If the SrsCfgInd Read & Write Yes Cell
parameter is set to
TRUE, the
None
TddSrsCfgMode Read & Write Yes Cell
parameter must be
set.
Read & Write Yes Cell
If the SrsCfgInd
parameter is not set to
TRUE,
None the Read & Write Yes Cell
TddSrsCfgMode
parameter does not
need
None to be set. Read & Write Yes Cell
No (And no impact on
None Read & Write N/A
the UE in idle mode)
None Read & Write Yes Cell
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None
If Read & Write N/A
the UE in idle mode)
SearchWindowSizeCfg
Ind is set to CFG, No (And no impact on
None
SearchWindowSize Read & Write N/A
the UE in idle mode)
must be set.
If
If RacCfgInd is set to No (And no impact on
Read & Write N/A
SearchWindowSizeCfg
CFG, this parameter the UE in idle mode)
Ind
mustis be
setset.
to
NOT_CFG, No (And no impact on
If RacCfgInd is set to Read & Write N/A
SearchWindowSize the UE in idle mode)
NOT_CFG, this
does not need
parameter doestonot
be
set. No (And no impact on
None
need to be set. Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (Modifications on
If
CellReselPriorityCfgIn this parameter would
None
d is set to CFG, Read & Write affect cell reselection N/A
No (Modifications
of the UE in idle on
CellReselPriority must
this
mode.)parameter will
be set.
Read & Write affect cell reselection N/A
If
of the UE in idle
CellReselPriorityCfgIn
If the mode.)
No (And no impact on
d is set to NOT_CFG,
None
SpeedDependSPCfgIn Read & Write N/A
CellReselPriority the (Modifications
UE in idle mode)
d parameter is setdoes to No on
not
If need
the
CFG, the to be set. this parameter would
None
SpeedDependSPCfgIn
TReselEutranSfMediu Read & Write affect cell reselection N/A
d No (Modifications
of the UE in idle on
mparameter
parameterismustset to
be
CFG, the this
mode.)parameter would
set.
TReselEutranSfHigh Read & Write affect cell reselection N/A
If the No (Modifications
parameter must be of the UE in idle on
SpeedDependSPCfgIn this parameter would
set. mode.)
d parameter is set to Read & Write affect cell reselection N/A
If the
NOT_CFG, the No (Modifications
of the UE in idle on
SpeedDependSPCfgIn
TReselEutranSfHigh this parameter would
mode.)
d parameter
parameter
None is set
does notto Read & Write affect cell reselection N/A
NOT_CFG,
need to be set.the of the UE in idle
TReselEutranSfHigh mode.)
parameter does not
need to be set.
No (Modifications on
this parameter would
If PmaxCfgInd is set to Read & Write
None affect cell reselection N/A
CFG, Pmax must be No (Modifications
of the UE in idle on
set. this
mode.)parameter would
If PmaxCfgInd is set to Read & Write affect cell reselection N/A
NOT_CFG, Pmax of the UE in idle
does not need to be mode.)
No (And no impact on
None
set. Read & Write N/A
the UE in idle mode)
No (Modifications on
this parameter would
None Read & Write affect cell reselection N/A
of the UE in idle
mode.)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (Modifications on
this parameter would
None Read & Write affect cell reselection N/A
No (Modifications
of the UE in idle on
this
mode.)parameter would
None Read & Write affect cell reselection N/A
No (Modifications
of the UE in idle on
If QqualMinCfgInd is this
mode.)parameter would
None
set to CFG, this Read & Write affect cell reselection N/A
No (Modifications
of the UE in idle on
parameter must be
this
mode.)parameter would
set.
Read & Write affect cell reselection N/A
If QqualMinCfgInd is
of the UE in idle
set to NOT_CFG, this
mode.)
No (And no impact on
parameter
None does not Read & Write N/A
need to be set. the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the
EutranInterFreqNCell No (And no impact on
None
MO, the value of Read & Write N/A
the UE in idle mode)
In the
LocalCellName is a
EutranInterFreqNCell
string of a maximum of No (And no impact on
None Read & Write N/A
MO, the value of
99 characters. The the UE in idle mode)
NeighbourCellName
string cannot be all null is
a string of aormaximum
characters
None contain Read Only N/A N/A
of
any 99ofcharacters.
the following The
string cannot be all null
characters:double
characters or contain No (And no impact on
quotation marks ("), Read & Write N/A
any of the(,),
following the UE in idle mode)
commas
characters:double
semicolons (;), equal No (And no impact on
quotation
signs (=), marks
single ("), Read & Write N/A
the UE in idle mode)
commas
quotation(,), marks ('),
semicolons
three consecutive(;), equal
plus No (And no impact on
None
signs
signs (=),
(+++),single
two or Read & Write N/A
the UE in idle mode)
quotation marks ('),
more consecutive
three
blanks, consecutive
and two orplus No (And no impact on
None
signs (+++), two or Read & Write N/A
more consecutive the UE in idle mode)
more consecutive
percentage signs (%).
blanks,
None and two or Read Only N/A N/A
more consecutive
percentage signs (%).
None Read Only N/A N/A
None Read Only N/A N/A
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
Qqualmin must be set
No (And no impact on
if UtranFddTddType is Read & Write N/A
the UE in idle mode)
set to UTRAN_FDD.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
ThreshXHighQ must
be set if No (And no impact on
Read & Write N/A
UtranFddTddType is the UE in idle mode)
ThreshXLowQ must be
set to UTRAN_FDD.
set if No (And no impact on
Read & Write N/A
UtranFddTddType is the UE in idle mode)
set to UTRAN_FDD.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the ANR MO,
AddCellThd must be No (And no impact on
Read & Write N/A
greater than or equal the UE in idle mode)
In
to the ANR MO,
DelCellThd.
AddCellThd must be No (And no impact on
Read & Write N/A
greater than or equal the UE in idle mode)
to DelCellThd.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
None Read Only N/A N/A
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the CA MO, if
MODE is set to No (And no impact on
None
CFG_INIT_UPD_ADD Read & Write N/A
the UE in idle mode)
R, INITREQURL in a
CA MO must begin No (And no impact on
None
with http or https, the Read & Write N/A
the UE in idle mode)
IP address must be a
valid No (And no impact on
NoneIP address, and Read & Write N/A
the port number must the UE in idle mode)
range from 1 to 65535.
In the CA MO, if No (And no impact on
None Read & Write N/A
MODE the UE in idle mode)
URL in is a CAnot MO set to must
DEFAULT_MODE,
begin with http or
UPDSIP
https, themust
None be a
IP address Read Only N/A N/A
valid IP address
must be a valid IP of
class
address, A, B,and or the
C. In port No (And no impact on
addition, it cannot be Read & Write N/A
number must range the UE in idle mode)
set
from 1 to 65535. IP
to the reserved
addresses
In the CA MO, 0.x.x.x URL or No (And no impact on
None
127.x.x.x, but can be Read & Write N/A
In the CA MO,
must be different from if the UE in idle mode)
set
MODE
SLVURL.to 0.0.0.0.
is not set to
In
The
In the
the CA
CA MO,
CERTMK MO, MO ifif with No (And no impact on
DEFAULT_MODE,
MODE
APPCERT is setsetto to Read & Write N/A
MODE
UPDSIP ismust
set tobe a the UE in idle mode)
CFG_INIT_UPD_ADD
appcert.pem
CFG_INIT_UPD_ADD defines a
valid
R, IP address
INITREQURL
certificate configured of
in a
R, INITREQSIP must No (And no impact on
class
CA
on aMO A, B,
must or C.
begin In Read & Write N/A
be a BS
addition,
In the validbefore
IP
itMO,
CAThere address
cannot if the be
the UE in idle mode)
with
delivery.
of classhttp A,or https,
B, orisC.only In
set
MODE
IP
one to
addressthe
is
suchitMO reserved
set to
must on be abe IP
BSa No (And no impact on
addition,
addresses
CFG_INIT_UPD_ADD cannot
0.x.x.x or Read & Write N/A
valid
and
set IP
this address,
MO
to the reserved cannot and IPbe the UE in idle mode)
127.x.x.x,
R,
the
addedINITREQSIP
port or but can
number
removed. must
mustbe
addresses
set
be atovalid
0.0.0.0. 0.x.x.x or
range
APPCERT
127.x.x.x. fromIP 1 address
in to
a 65535. Read & Write
No (And no impact on
N/A
of
In class
the
CERTMK CA A,MO,
MOB, or isifisC.onlyIn the UE in idle mode)
In
On the CAitthere
a BS,
addition, MO,
cannot bebe
INITREQURL
recommended
MODE is set to must
to enter
one
set toTRUSTCERT
different the reserved
from MO
IP
ASCII characters.
CFG_INIT_UPD_ADD
with CERTNAME The
set Read Only N/A N/A
addresses
SLVINITREQURL.
name must 0.x.x.x
not contain or
R
On
to anda BS,
caroot.pem.
127.x.x.x. there is only
spaces
APPCERT
SLVINITREQURL or
one activatedin
CERTNAME the
in anfollowing
devicea is
characters: Read Only N/A N/A
TRUSTCERT MO? is
APPCERT
not empty,
certificate \
MO
for / :
each *
is "<
> |.
recommended
SLVINITREQURL
application
recommended type. to enter
to enter
in a
When
ASCII
ASCII anmust
CA MOcharacters. CERTMK
characters. beginThe The No (And no impact on
MO Read & Write N/A
with is
name
name being
must
http
must added,
not
or https,
not contain
the
contain the UE in idle mode)
the
spaces
IP APPCERT
address or the
must
spaces or the following is case-
following
be a
insensitive;
characters:
valid IP but
characters: \ / : * ? " <
\
address, / : when
* ?and " < Read Only N/A N/A
an
>
the
> |.CERTMK
|. port number MOmust is
referenced,
range from
When an 1the to 65535.
APPCERT
TRUSTCERT is case-
MO is
sensitive.
being added, the
CERTNAME is case-
insensitive; but when
an TRUSTCERT MO
CERTNAME in a CRL
MO is recommended
to enter ASCII
characters. The name
must not contain
spaces or the following
IP in a CRLTSK
characters: \ / : * MO
?"<
must
> |. be set to a valid
IP address of class Read Only N/A N/A
When an CRL MO isA,
B,
being added, the It
or C. In addition,
cannot
CERTNAME be setistocase-
Read Only N/A N/A
127.x.x.x
insensitive; or but
0.x.x.x
when
(including
an CRL MO 0.0.0.0).
is
In
Each
Nonethe CRLTSK
CRLTSK
referenced, the MOMO, Read Only N/A N/A
SLVIP
CERTNAME
must must be
is case-
have a unique
different
sensitive.from IP. an
FILENAME.When
None
CRLTSK MO is being Read Only N/A N/A
This
added, parameter
the FILENAMEis valid
only when
is case-insensitive; but
CRLGETMETHOD
when an CRLTSK MO in Read Only N/A N/A
thereferenced,
is same CRLTSK the MO
is set to LDAP.
FILENAME is case-
Read Only N/A N/A
sensitive.
FILENAME in a
CRLTSK
None MO is Read Only N/A N/A
recommended to enter
ASCII characters. The
name
None must not contain Read Only N/A N/A
This
spaces parameter is valid
or the following
only
SIP whenbe\ a
characters:
must / :valid
* ? " IP
<
CRLGETMETHOD
> |.
address of class A, in B, Read Only N/A N/A
the
or C.same CRLTSK
In addition, it MO
is set to LDAP.
cannot be set to the
Read Only N/A N/A
reserved IP addresses
0.x.x.x or 127.x.x.x,
but
None can be set to Read Only N/A N/A
0.0.0.0.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the DEVIP MO, if
PT and VRFIDX are No (And no impact on
None Read & Write N/A
set to LOOPINT and 0, the UE in idle mode)
respectively, PN can
be set to any value in No (And no impact on
None Read & Write N/A
the range of 0 to 3. the UE in idle mode)
In the DEVIP MO, if
PT
None is set to LOOPINT, Read Only N/A N/A
and VRFIDX is not set
to 0, PN can be set to No (And no impact on
Nonevalue in the range
any Read & Write N/A
the UE in idle mode)
of 4(VRFIDX)+4 to
4(VRFIDX)+7.
In
In the
None the CPBEARER
DEVIP MO, this Read Only N/A N/A
MO,
parameter if BEARTYPE can be set is
set
to a to SAAL,
value withinthis
In
None the
parameter DEVIP can MO,the if Read Only N/A N/A
range
PT is of 0set
not to 15be
to
set
if SBT
SUBIF
to
is anytovalue in the
set
or
range LOOPINT, of 0 to 63. VRFIDX
BACK_BOARD
must
None be set to 0.and Read & Write Yes BS
In
PT theis CPBEARER
set to PPP.
In
MO, theif DEVIP
BEARTYPE MO, ifis
In
PT theand DEVIP
VRFIDX MO, this
are
set
parameterto SCTP, canthis beand set0,
set to LOOPINT Read & Write Yes BS
parameter
to a value within can bethe set
respectively,
to any value PNthe
in can
range
be set of to 0 to 15 if SBT
range
None
is set of
to 0any value
to 65535. in
Read Only N/A N/A
the
In range
the CPBEARER of 0 to 3.
BASE_BOARD
In theif DEVIP MO, or if
MO,
In aisDEVIP
E1_COVERBOARD BEARTYPE MO, thisis
PT
set toPT set
SCTP6, to LOOPINT,
this
None
parameter
and
and VRFIDX is can
set to
is bebe
notset
PPP. set Read Only N/A N/A
parameter
to
In E1_COVERBOARD
a DEVIP canMO, set
this
to
to 0, PN
any value can be
in be set
theset to
or
parameter
any value can
in the range
None
range orof
ETH_COVERBOARD
to 0 1 if0 SBTto 65535. istoset Read Only N/A N/A
of 4(VRFIDX)+4
iftoSN is
BASE_BOARD
4(VRFIDX)+7. set to a value and
within
PT
In the is setthetorange
DEVIP ETH.MO, of if0 to
Read Only N/A N/A
In
5.
SBT the isDEVIP
a DEVIP set toMO, MO, if
this
PT
In a
parameteris not
DEVIP
BASE_BOARD, this setcan to
MO, SUBIF
be this
set
or
to LOOPINT,
parameter
0
parameter or 1 if SBT canVRFIDX
can be set
is set
be set Read Only N/A N/A
must
to be
BASE_BOARD,
to BASE_BOARD
PPP, MPGRP, set to 0. and
In
IP
ETH, the
BACK_BOARD,
PT inisthe DEVIP
set to ETHTRK.
DEVIP
ETHTRK, MO, orif
MO
PT
must
LOOPINT, and
ETH_COVERBOARD
In a DEVIP VRFIDX MO,
be setortoSUBIF. are
a ifthis
PT
valid Read Only N/A N/A
set
ifInSN
is
IP not
parameterto
addressLOOPINT
the DEVIP MO, 7.
is
setset to to
can 6
LOOPINT,
of or
be
Class andset
if A, 0,
respectively,
in
to
B,
SBT the
0orto binary
C.
is 3set PN
8 value
oraddition,
In to to 35 caninto
ifit
be
which
SBT
cannot set
BACK_BOARD, to
beany
isMASK
set value
to cannot
127.x.x.x thisinor Read Only N/A N/A
the
be range
set
BASE_BOARD
0.x.x.x. to
parameter must be of
all 0
1. to and3. set
In
PT
In
to thetheis
PPP. DEVIP
binary
set to MO,
value
LOOPINT.
logical operation ifinto
PT
which
In a is set
MASK
DEVIP to LOOPINT,
MO,in the
this Read Only N/A N/A
result of
In the DEVIP MO, if IP and MASK
and
DEVIP
parameter
in
SBT VRFIDX
a DEVIP MOcan
is set tois
MO,is be notset set
to
to 0,
converted, PN
0 to 3the
neither
E1_COVERBOARD, can
if PT be
0network
isisnotset
set ID to
to No (And no impact on
any value in the range Read & Write N/A
allowed
MPGRP.
nor
this host parameterto precede
ID cancan be all 1.
be the UE in idle mode)
of
In
0
setor 4(VRFIDX)+4
the
atoDEVIP logical
1 PPP,
after being MO,
MPGRP, to
operation
this
4(VRFIDX)+7.
result
parameter
or of IP
LOOPINT. in a set
converted and
can
into a MASK
be binary No (And no impact on
None
DHCPSVRIP Read & Write N/A
in
to athe
value.
In DEVIP
value
DEVIP MO,
within MO,the if the UE in idle mode)
DHCPSVRIP
neither
range the
ofset0 to 5MO
network if SBTmust
ID
SBT
be is
ahost
valid to
nor
is set to IDIPcan
ETH_COVERBOARD,
addressbe all Read Only N/A N/A
of
0 class
or 1 after
ETH_COVERBOARD A, B, beingor C. In
this
addition, parameter it cannot canbe be
converted
and
set toPT ETH,is setinto toa ETH.
ETHTRK, binary
0.x.x.x
value.
In or 127.x.x.x.
or a DEVIP
LOOPINT. MO, this
parameter can be set
to a value within the
range of 0 to 2 if SBT
is set to
ETH_COVERBOARD
In an E1T1 MO, if PS
is set to ALLPORT and
WORKMODE is set to
E1_UNBA or E1_BA,
FRAME can be set to
E1_DOUBLE_FRAME,
E1_CRC4_MULTI_FR
When
None orbearer link is
AME Read Only N/A N/A
PPPLNK,
E1_HYBRID_FRAME. in the E1T1
MO,
In an E1T1 MO, if PSis
if WORKMODE
set
None
and toWORKMODE
E1_BA or are Read Only N/A N/A
E1_UNBA,
In
set an E1T1
to E1T1
ALLPORT TSN
MO, ifmust SBT
In
be
is an
set
set toto a MO, ifand
value PS
within
T1,
is setrespectively,
to ALLPORT
the
FRAME rangecan
BACK_BOARD, of TS1
beisset SNtoand
to Read Only N/A N/A
WORKMODE
TS31;
and DSTSNif WORKMODEcannot be set to
T1_SUPER_FRAME
E1_UNBA or E1_BA,
is set
the same.
or to T1, TSN must
LNCODE
None
be set to acan value be within
set to Read Only N/A N/A
T1_EXTENDED_SUP
AMI or HDB3.
the range of TS1 to
ER_FRAME.
In
TS24, an E1T1 OtherMO, timeslotsif PS
If
and WORKMODE
WORKMODE in an No (And no impact on
None
are
all-portnot E1T1used. MO isare set
Read & Write
the UE in idle mode)
N/A
set
When
In
When to ALLPORT
the configuring
EP2RSCGRP
bearer linkand isan
to
T1,
E1T1
MO, E1_UNBA
respectively,
ifMO,
SBT or
MPLNK,
E1_BA, in ensure
FRAME
is set
the E1T1 tothat
LNCODE
this
ETH_COVERBOARD
MO, parameter
if can be
WORKMODE is can
set to is
Read & Write Yes BS
be
AMI set
E1_COVERBOARD
and PT to
orE1_BA
B8ZS.
is set to if
set to
E1_DOUBLE_FRAME, or
If
SN WORKMODE
ETHTRK,
E1_UNBA,is set to 0 to in
this
TSN 5.
must an
E1_CRC4_MULTI_FR
all-port
When
parameter E1T1
configuring
can MO is
bewithinan
setset Read & Write Yes BS
be
AME set or to a value
to
E1T1
the E1_UNBA
any
rangeMO,
value or
ensure
of in thetothat
TS1
E1_HYBRID_FRAME
E1_BA,
this
range parameter
of LNCODE
0 to 2.is set canto
TS31;
in each if WORKMODE
single-port Read & Write Yes BS
be
In
is set
BASE_BOARD
In the
an E1T1
set toto AMI
EP2RSCGRP
T1,IfMO, or if
TSNifmust HDB3
SNSBT is
E1T1
in
set
MO, each
to if MO.
6SBTsingle-port
or 7.
is set to
is
be set to
set to a value
WORKMODE in an withinall-
E1T1
When
BACK_BOARD,
the rangeMO.
ETH_COVERBOARDadding If TS1
of an E1T1
SNto to Read Only N/A N/A
port
WORKMODE
MO to
and E1T1
PTOther MO
aisbackplane,
setcannotis
in
to ETH, set
an all-
and
TS24,
T1, DSTSN
FRAME timeslots
can be be
set
port
ensure
this
the
are E1T1
parameter
same.
not that
used. MOthis is
can set beto
to
T1, LNCODE
parameter
set to any value
is can
set in
to be
the Read Only N/A N/A
In the
T1_SUPER_FRAME
In the E1T1
EP2RSCGRP MO, this
set
range to AMI
BACK_BOARD.
parameter of 0 or to
is B8ZSonly
5.
valid in
or
MO,
each
When
In theifsingle-port
MT is set
EP2RSCGRP
querying anto
E1T1
when PS
T1_EXTENDED_SUP
ENDPOINT_GROUP is set to
None
MO.
E1T1If
MO,
ALLPORT. no all-port
ifMO,
SBT is set E1T1
ensure tothat,t Read Only N/A N/A
ER_FRAME
his
MOparameter
this is configured,
BACK_BOARD
parameter inisiseach
andsettheto
single-port
meaning
default
E1_COVERBOARD
PT is set valuetoE1T1 of MO.or
EPGROUPID
TUNNEL,
.If noparameter
WORKMODE all-port E1T1
BACK_BOARD
this incan
ifeachMO
SN beis Read Only N/A N/A
is
In configured,
the
single-port
set to any EP2RSCGRP
0 to valueE1T1
5. the in theis
MO
default
MO,
E1_UNBA,
When
range if ofvalue
MT 0 is
querying and
to of an
set
14. to
None
WORKMODE
ENDPOINT_NODE
LNCODE can in each
be set ,thi
to Read Only N/A N/A
E1T1
In
In the MO,
EP2RSCGRP
the EP2RSCGRP ensure that
ssingle-port
parameter
AMI
In
this
MO, the or EP2RSCGRP
HDB3.
parameter
if SBT
E1T1
isis setis
MO
set
to
is
to
MO,
E1_UNBA,
meaning if SBT is set to .
and
UPPEERID
MO, if SN is set or
BASE_BOARD
BACK_BOARD
BASE_BOARD,
None to
and
this a Read Only N/A N/A
FRAME
value
BACK_BOARD
PT is set can
in the tocanbe set
range
PPP, ofto0is
if this
SN
parameter
E1_DOUBLE_FRAME, be set
to
set5,tothis
parameter
to 6 orparameter
PPP,MPGRP,ETH 7.
can be set
E1_CRC4_MULTI_FR
can
to anybe set toin the
value
None
or ETHTRK. Read Only N/A N/A
AME orof 0 to 15.
ETH_COVERBOARD
range
In the EP2RSCGRP
E1_HYBRID_FRAME.
or theif EP2RSCGRP
In
MO, SBT is set to
E1_COVERBOARD.
MO, if SBT is setthis
BACK_BOARD, to Read Only N/A N/A
In the EP2RSCGRP
BASE_BOARD
parameter can be andset
MO,
PT isifset
to PPP SN isETHTRK,
set to 6 or
ortoTUNNEL.
7,
thisthis parameter
parameter cancan be Read Only N/A N/A
In the EP2RSCGRP
be set
set
MO, to value
toif any
SBT is setintothe
BASE_BOARD,BACK
range of 0 to 1.
E1_COVERBOARD,
_BOARD or can be Read Only N/A N/A
In
thisthe EP2RSCGRP
parameter
ETH_COVERBOARD.
MO, if SBT
set to PPP or is set
MPGRP. to
BASE_BOARD
In
Nonethe EP2RSCGRP and Read Only N/A N/A
PT
MO,isifset SBT to is
MPGRP,
set to
this parameter can be
ETH_COVERBOARD,
set
None
this to any valuecan
parameter in the be Read Only N/A N/A
range
set to ETH of 0 to or3.
In the EP2RSCGRP
ETHTRK. No (And no impact on
Noneif SBT is set to
MO, Read & Write N/A
the UE in idle mode)
BASE_BOARD and
PT is set to PPP, this
None
parameter can be set Read Only N/A N/A
to any value in the
range of 0 to 15.
In the EP2RSCGRP
MO, if SBT is set to
E1_COVERBOARD
and PT is set to
MPGRP, this
None Read & Write Yes BS
No (And no impact on
None Read & Write N/A
In the GTRANSPARA the UE in idle mode)
MO, this parameter is
No (And no impact on
valid only when Read & Write N/A
the UE in idle mode)
BYPASSSWITCH is
set
Whento ENABLE. No (And no impact on
None an IKEPEER Read & Write N/A
MO is being added, the UE in idle mode)
the PEERNAME is
case-insensitive;
None but Read & Write N/A N/A
when an IKEPEER
MO is referenced, the
PEERNAME is case- Read Only N/A N/A
sensitive.
The value of
If AUTHALG in
None
PEERNAME in an
an Read & Write Yes BS
IKEPROPOSAL
IKEPEER MO must MObe is
set to AES_XCBC_96,
comprised of ASCII
IKEVERSION
characters. in the Read & Write Yes BS
associated IKEPEER
MO cannot be set to
REMOTEIP
None
IKE_V1. in an Read & Write Yes BS
IKEPEER MO must be
a valid IP address of
class A, B, or C. In Read & Write Yes BS
addition, it cannot be
set to 0.x.x.x or
None
127.x.x.x. Read & Write Yes BS
If AUTHALG in an
None
IKEPROPOSAL MO is Read Only N/A N/A
set to AES_XCBC_96,
IKEVERSION in the No (And no impact on
None
associated IKEPEER Read & Write N/A
the UE in idle mode)
MO cannot be set to
IKE_V1. No (And no impact on
Read & Write N/A
If AUTHALG in an the UE in idle mode)
IKEPROPOSAL MO is
set to AES_XCBC_96, No (And no impact on
None Read & Write N/A
IKEVERSION in the the UE in idle mode)
associated IKEPEER6
MO cannot be set to
IKE_V1.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
None
In an IP2RSCGRP Read Only N/A N/A
MO, this parameter
can be set to a value
None
within the range of 0 to Read Only N/A N/A
15 if PT is set to PPP.
In
None an IP2RSCGRP Read Only N/A N/A
MO,
In thethis parameter
IP2RSCGRP
In
can an be IP2RSCGRP
MO, if SBTto set is aset
value
to
MO,
within thisthe
E1_COVERBOARD,
None parameter
range of 0 to Read Only N/A N/A
can
3
this be is
if PT setset
parameter to to can be
E1_COVERBOARD
MPGRP.
set to PPP or MPGRP. or
ETH_COVERBOARD
In
None
In an IP2RSCGRP
the IP2RSCGRP Read Only N/A N/A
ifMO,
MO, SNthis
ifisSBTset to a value
parameter
is set to
within
can bethe
E1_COVERBOARD, setrange of 0 to
to a value
5.
within the rangecan
this parameter of 0beto Read Only N/A N/A
In
setifan
5 to IP2RSCGRP
SBT ETH is set
or to
MO, this parameter
ETH_COVERBOARD
ETHTRK.
can
and be
PT set to to ETH.
is set Read Only N/A N/A
In the IP2RSCGRP
BASE_BOARD,
In an IP2RSCGRP
MO, if SBT is set to
BACK_BOARD
MO, this parameter
BASE_BOARD, or
this
ETH_COVERBOARD Read Only N/A N/A
can be set can
parameter to a bevalueset
iftoSN
DSTIP
within
PPP, istheset
in an to 6 or
range
MPGRP, 7.
ofETH
0 to
IP2RSCGRP
2
or
Noneif SBT
ETHTRK. is set MOto must Read Only N/A N/A
be a valid
ETH_COVERBOARD
In the IP address
IP2RSCGRP
In
of
and
MO, an ifIP2RSCGRP
class
PT A,set
is
SBT B,
is or
setC.
to toIn
MO,
Nonethe logic
addition,
ETHTRK.
BACK_BOARD, AND
it cannot be
this Read Only N/A N/A
result
set
In anto of DSTIP
0.x.x.x
IP2RSCGRP
parameter can be set or and
DSTMASK
127.x.x.x.
MO,
to PPP must be
thisorparameter
TUNNEL.
the
In same set toDSTIP.
cananbeIP2RSCGRP as 0 or 1 if Read Only N/A N/A
That
MO,
SBT the is,
is set DSTIP
logic
to AND must
be
BASE_BOARD andIP
result set ofto a network
DSTIP
address.
DSTMASK
PT is set to must ETH be or Read Only N/A N/A
In
the the
ETHTRK. same binary value into
as DSTIP.
which
That
In an is, DSTMASK
DSTIP must
IP2RSCGRP in an No (And no impact on
None
IP2RSCGRP
be MO is Read & Write N/A
MO,set this to parameter
a network IP the UE in idle mode)
converted,
This
address.
can be parameter
set to0 cannotis valid
a value
precede
only
withinwhen the1,range
but the of 0 to No (And no impact on
value can is beset to Read & Write N/A
ARPSPOOFCHKSW
14 if SBT is the UE in idle mode)
255.255.255.255.
set to ENABLE. and
BACK_BOARD
PT is set to TUNNEL. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
This parameter is valid
only when No (And no impact on
Read & Write N/A
INVALIDPKTCHKSW the UE in idle mode)
is set to ENABLE.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
This parameter is valid
only when No (And no impact on
Read & Write N/A
IPSECREPLAYCHKS the UE in idle mode)
W is set to ENABLE.
None Read Only N/A N/A
PT is set to LOOPINT,
In the IPPATH
JNRSCGRP MO, ifbe
cannot
SBT
set toisENABLE. set to
BASE_BOARD
In the IPPATH MO, or if
E1_COVERBOARD
PT and VRFIDX are
and
set toPT is set to PPP,
LOOPINT and 0,
the value
respectively, of thisPN can
parameter
be set to any rangesvaluefrom in
0
the
Nonetorange
15. of 0 to 3. Read & Write Yes BS
In
In the
the IPPATH
IPPATH MO, MO, ifif
SBT is set
PT is set to LOOPINT, to
BASE_BOARD
None
and VRFIDX is not or set Read & Write Yes BS
E1_COVERBOARD
to 0, PN can be set to
and
any valuePT is set in the to range
None
MPGRP,
of 4(VRFIDX)+4 the value to of Read & Write Yes BS
this parameter
4(VRFIDX)+7. ranges
from
In the0IPPATH to 3. MO, if
In theisIPPATH Read & Write Yes BS
SBT set to MO, if
SBT and PT are this
BASE_BOARD, set to
BASE_BOARD
parameter can be and set Read & Write Yes BS
ETH,
to PPP, respectively,
MPGRP, ETH, this
parameter
ETHTRK, in
LOCALIP can
or an be set
to 0 or 1.MO must be
LOOPINT.
None
IPPATH Read & Write Yes BS
In
In
an the
the IPPATH
IPPATH
IP address MO,
MO,
of class ifif
In
SBT the and IPPATH
PT are MO,set to
SBT
A,
this is
B,parameterset to
or C. In addition, isand
valid
BASE_BOARD
itBACK_BOARD,
cannot this Read & Write Yes BS
only
ETHTRK, whenbe set to
PATHTYPE
respectively,
parameter
127.x.x.x
is setparameter or
to FIXED. can0.x.x.xbe set
PEERIP
this
to PPP orin0.0.0.0). an IPPATH
TUNNEL. can be
(including
MO must
set
In
In anto
the orbe
0IPPATH
IPPATH 1. anMO, IP if
MO, Read & Write Yes BS
address
In
SBT the of
IPPATH
is setmust class
to be MO, A, B, if
LOCALIP
or C. In addition, it
SBT and
E1_COVERBOARD,
different PT
from are set
PEERIP. to
cannot
ETH_COVERBOARD
thisanparameter be set tocan ifbe Read & Write Yes BS
In
127.x.x.x IPPATH MO,
and
set
LOCALIPtoETH,PPPor is or0.x.x.x.
respectively,
set MPGRP.
to
In
the
In an
the IPPATH
value IPPATHofmust
this MO,
MO, if
0.0.0.0,
None
LOCALIP PTmust bebe Read & Write Yes BS
parameter
SBT
set is
to PPP set ranges
to
or PEERIP.
MPGRP. from
different
In
0 the
to 5.IPPATH
ETH_COVERBOARD, from MO,
this
In the
an parameter
IPPATH
IPPATH
this parameter can is
MO,
MO, validthis
beif Read & Write Yes BS
only
set towhen
SBT
parameter andETH, PT JNRSCGRP
can arebeset
ETHTRK, setto
is
or set to ENABLE.
ETH_COVERBOARD
to E1_COVERBOARD
LOOPINT.
In
None IPPATH MO, if
and
or the ETHTRK, Read & Write Yes BS
PT and VRFIDX
respectively,
ETH_COVERBOARD the are value
set
ifofSN toisLOOPINT
this parameter
set to a value and 0,
respectively,
rangesthe
within fromrange 0PN to ofcan
2. 0 to Read & Write Yes BS
be
In the IPPATH MO, in
5. set to any value if
the
SBT
In an range setof
isIPPATH to0 MO, to 3. this
In the IPPATH
BASE_BOARD
parameter can MO, beor set if Read & Write Yes BS
PT
In is IPPATH
set to LOOPINT,
ETH_COVERBOARD
to BASE_BOARD
an MO,or if
In
and
and an IPPMSESSION
isVRFIDX
ETH_COVERBOARD
PT PT setistoset istonot set
LOOPINT,
MO,
to 0,
ifLOOPINT,if
PN BINDPATH
SN is set the can be
tocannot set7.
6value
or isto of Read & Write Yes BS
JNRSCGRP be
set
any
this
set to NO,
value
parameter
to ENABLE. LOCALIP
in the range
ranges
In
must
of
from an IPPMSESSION
0be toa3.valid IP
4(VRFIDX)+4 to
None
MO,
address if
4(VRFIDX)+7. BINDPATH
of class A,isB, Read Only N/A N/A
In the IPPATH MO, if
set
or C.to InNO, PEERIP
addition,
SBT and PT are set it to
must
cannot
BACK_BOARD bebe a valid
set toIP and
address of class A, B, Read Only N/A N/A
0.x.x.x
TUNNEL, or 127.x.x.x
respectively,
or
theC.value
(including In addition, this it
0.0.0.0).
of
cannot
In an be set
IPPMSESSION
parameter ranges to from
Read Only N/A N/A
0.x.x.x
MO,
In the
0 to 14. if or 127.x.x.x
BINDPATH
IPPMSESSION is
(including
set tothis
MO, NO, 0.0.0.0).
LOCALIPis
parameter
In
must
validan onlyIPPMSESSION
be different
when from Read Only N/A N/A
MO,
PEERIP.
IPPMTYPE if BINDPATH is set to is
set to
FOUR_TUPLE. NO, LOCALIP
must
None be different from Read Only N/A N/A
PEERIP.
None
In the IPSECBIND Read Only N/A N/A
MO,
In anifIPSECBIND
SN is withinMO, the
range from 0 to
this parameter can be 5, this
None
parameter
set to 0 or 1must be is
if SBT set Read Only N/A N/A
to to BASE_BOARD
set
ETH_COVERBOARD.
and PT is set to ETH Read Only N/A N/A
In
or the
ETHTRK.IPSECBIND
In
MO,the if IPSECBIND
SN is set to MO,
In an IPSECBIND 6 or
MO,
7, this
this this parameter
parameter
parameter cancanis
be Read Only N/A N/A
validtoonly
be set
set when
atovalue SBT is
within
set to
BASE_BOARD
the rangeBASE_BOARD.
of 0 toor5 if
ETH_COVERBOARD.
SBT is set to Read Only N/A N/A
ETH_COVERBOARD
and PT is set to ETH.
None
In an IPSECBIND MO, Read Only N/A N/A
this parameter can be
set to a value within
the range of 0 to 2 if
SBT is set to
ETH_COVERBOARD
and PT is set to
ETHTRK.
When an
IPSECPOLICY is
being added, the
SPGN is case-
Read Only N/A N/A
insensitive. When an
IPSECPOLICY is
referenced,
None the SPGN Read Only N/A N/A
is case-sensitive.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
None
In the Read & Write Yes BS
SECURITYTEMPLAT
E MO, this parameter
In the only when Read & Write Yes BS
is valid
SECURITYTEMPLAT
SEGWSWITCH is set
E
to MO, this parameter
DISABLE.
In the only when Read & Write Yes BS
is valid
SECURITYTEMPLAT
SEGWSWITCH is set
In
E the
to MO, this parameter
DISABLE.
SECURITYTEMPLAT Read & Write Yes BS
is valid only when
E MO, this parameter
SEGWSWITCH is set
is
to valid only when
DISABLE.
In the Read & Write Yes BS
SEGWSWITCH is set
SECURITYTEMPLAT
to DISABLE and
E MO, this parameter
IKEVERSION
IP in the is set to Read & Write Yes BS
is
IKE_V1only
valid
SUBNETVLAN . when MO
SEGWSWITCH
must be a valid IP is set
to DISABLE.
address of class A, B, Read Only N/A N/A
or C. In addition, It
cannot be set to
127.x.x.x or 0.x.x.x.
MASK in the
SUBNETVLAN MO Read Only N/A N/A
must be all 1.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
When
TRMULOLCSWITCH No (And no impact on
None
in the TOLCALG MO is Read & Write N/A
the UE in idle mode)
set to ON, the QoS of
high-priority services No (And no impact on
None
can be ensured in the Read & Write N/A
the UE in idle mode)
case of transport
overload in the uplink. No (And no impact on
Read & Write N/A
When
Each TUNNEL MO the UE in idle mode)
TRMULOLCSWITCH
must have a unique
in the TOLCALG
combination MO is
of SCN, Read Only N/A N/A
set to TUNNEL
Each
DCN, OFF, the
SSRN, QoS of
MO
DSRN,
high-priority
must
SSN, have a services
and DSN. unique
cannot be ensured
combination of SCN, in Read Only N/A N/A
Each
DCN, TUNNEL
the case MO
of transport
SSRN, DSRN,
must have
overload
SSN, athe
andinDSN.unique
uplink.
combination of SCN, Read Only N/A N/A
DCN, SSRN, DSRN,
SSN, and DSN.
None Read Only N/A N/A
Each TUNNEL MO
must have a unique
combination of SCN, Read & Write Yes BS
Each
DCN, TUNNEL
SSRN, DSRN, MO
must have
SSN, and DSN.a unique
combination of SCN, Read & Write Yes BS
Each
DCN, TUNNEL
SSRN, DSRN, MO
must have
SSN, and DSN.a unique
combination of SCN, Read & Write Yes BS
DCN, SSRN, DSRN,
SSN, and DSN.
None Read & Write Yes BS
LOCALIP in a
TWAMPCLIENT MO
must
None be a valid IP Read Only N/A N/A
PEERIP
address ofin class
a A, B,
TWAMPCLIENT
or C. In addition, MOit
must bebea valid No (And no impact on
cannot set toIP Read & Write N/A
address the UE in idle mode)
0.x.x.x orof127.x.x.x.
class A, B,
or C. In addition,
LOCALIP must beit No (And no impact on
cannot
differentbe set PEERIP
from to Read & Write N/A
the UE in idle mode)
0.x.x.x or 127.x.x.x.
in a TWAMPCLIENT
LOCALIP
MO. must be No (And no impact on
None
different from PEERIP Read & Write N/A
the UE in idle mode)
in a TWAMPCLIENT
MO.
LOCALIP in a
None Read Only N/A N/A
TWAMPRESPONDER
MO must be a valid IP
No (And no impact on
address of class A, B, Read & Write N/A
the UE in idle mode)
or C. In addition, it
cannot be set to No (And no impact on
None or 127.x.x.x.
0.x.x.x Read & Write N/A
the UE in idle mode)
No (And no impact on
None
In the Read & Write N/A
the UE in idle mode)
TWAMPSENDER MO,
this parameter is valid No (And no impact on
Read & Write N/A
only when the UE in idle mode)
PKTSIZETYPE is set
to FIXED. No (And no impact on
None
In the Read & Write N/A
the UE in idle mode)
TWAMPSENDER MO,
this parameter is valid No (And no impact on
Read & Write N/A
only when the UE in idle mode)
PKTINTTYPE is set to
FIXED.
None Read Only N/A N/A
None
LOCALIP in an Read & Write Yes BS
UDPSESSION MO
must be a valid IP
None
PEERIP
address of in class
an A, B, Read & Write Yes BS
UDPSESSION
or C. In addition, MO
it
must
cannot be set toIP
be a valid No (And no impact on
address Read & Write N/A
0.x.x.x orof127.x.x.x
class A, B, the UE in idle mode)
or C. In addition,
(including it
0.0.0.0).
cannot
LOCALIP be must
set tobe No (And no impact on
Read & Write N/A
0.x.x.x
differentorfrom
127.x.x.x
PEERIP the UE in idle mode)
(including 0.0.0.0).
in an UDPSESSION
LOCALIP
MO.
None must be Read Only N/A N/A
different from PEERIP
in an UDPSESSION
MO. No (And no impact on
None Read & Write N/A
the UE in idle mode)
None
In the UDTPARAGRP Read Only N/A N/A
MO, if PRIRULE is set
to DSCP, this No (And no impact on
None
parameter can be set Read & Write N/A
the UE in idle mode)
to any value in the
range of 0 to 63. No (And no impact on
Read & Write N/A
In the UDTPARAGRP the UE in idle mode)
MO, if PRIRULE is set
to IPPRECEDENCE, No (And no impact on
None Read & Write N/A
this parameter can be the UE in idle mode)
set to any value in the
range No (And no impact on
None of 0 to 7. Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the No (And no impact on
None
USERPLANEHOST Read & Write N/A
the UE in idle mode)
MO, if VRFIDX is set
to any value in the
None
range of 1 to 7, Read Only N/A N/A
IPVERSION must not
be set to IPv6.
Read & Write Yes BS
In the
USERPLANEHOST
MO, if VRFIDX is set
to any value in the
range of 1 to 7,
IPSECSWITCH must
not be set to ENABLE.
In the
In the
USERPLANEHOST
USERPLANEHOST
MO, LOCIPV4 must be
MO,
a if VRFIDX
valid IP address is set
of
to any A,
Class value
B, orinC. theIn Read Only N/A N/A
In the of 1 to 7,
range
addition,
USERPLANEHOST it cannot be
IPVERSION
set to 127.x.x.x must or notbe
MO,
be LOCIPV6
set to IPv6. must Read & Write Yes BS
0.x.x.x.
set to a global unicast
In the
address.
USERPLANEHOST
In
In the
the Read & Write Yes BS
MO, this parameter is
USERPLANEHOST
USERPLANEHOST
valid
MO,
MO, ifthis only
VRFIDXwhen is setis
parameter
IPVERSION
to any
valid
In the value
only when is set
in the to Read & Write Yes BS
IPv4.
range
IPVERSION of
USERPLANEHOSTto 1 to 7,
is set
IPSECSWITCH
IPv6.this parameter
MO, must is
not Read & Write Yes BS
validbeonly set when
to ENABLE.
IPSECSWITCH
In the is set
to ENABLE. No (And no impact on
None
USERPLANEPEER Read & Write N/A
the UE in idle mode)
MO, if VRFIDX is set
to any value in the
None of 1 to 7,
range Read Only N/A N/A
IPVERSION must not
In
be the
set to IPv6.
In the
USERPLANEPEER Read & Write Yes BS
In the
USERPLANEPEER
MO, PEERIPV4 must
USERPLANEPEER
MO,
be a ififvalid
VRFIDXIP address is set
MO,
to any VRFIDX
value in is set
the Read Only N/A N/A
of
In
to Class
the
any A, B,inorthe
value C. In
range
addition, of 1it to 7, be
cannot
USERPLANEPEER
range
IPVERSION of 1 to must7, not
set
MO, toPEERIPV6
IPSECSWITCH 127.x.x.x ormust
be set to IPv6. must
0.x.x.x.
Read & Write Yes BS
be set to a
not be set to ENABLE.global
In the address.
unicast
USERPLANEPEER
In
In the
the Read & Write Yes BS
MO, this parameter is
USERPLANEPEER
USERPLANEPEER
valid
MO,
MO, ifthis only
VRFIDXwhen is setis
parameter
IPVERSION
to any
valid
In the value
only when is set
in the to Read & Write Yes BS
IPv4.
range
IPVERSION of
USERPLANEPEERto 1 to 7,
is set
IPSECSWITCH
IPv6.this parameter
MO, must is
not Read & Write Yes BS
validbeonly set when
to ENABLE.
IPSECSWITCH is set
to ENABLE. No (And no impact on
None
In the binary value into Read & Write N/A
the UE in idle mode)
In a VLANMAP
which MASK in a MO,
NEXTHOPIP
VLANMAP
In a VLANMAP MO isis set to
MO, Read Only N/A N/A
224.0.0.0,
converted,
NEXTHOPIP must be VRFIDX
0 cannot
must
a validbeIPset
precede Intoaddition,
1.address 0. of
MASK
class A,can B, C,be or Read Only N/A N/A
255.255.255.255,
224.0.0.0. In addition, but
In a VLANMAP
cannot
it cannot set MO,
bebe0.0.0.0. to
NEXTHOPIP
In a VLANMAP
0.x.x.x is MO,
or 127.x.x.x. set to Read Only N/A N/A
224.0.0.0,
the logical AND result
VLANMODE
of NEXTHOPIP must andbe
No (And no impact on
set
MASK to SINGLEVLAN.
cannot be 0. Read & Write N/A
In
In theparameter
the VLANMAP
VLANMAP MO,
MO, the UE in idle mode)
This
In a VLANMAP must
MO,
this
this
be parameter
parameter
set to a valid is
is valid
valid
value
NEXTHOPIP
only when is set to No (And no impact on
only
when when
224.0.0.0, the VLANMAP
MASK must Read & Write N/A
VLANMODE is the UE in idle mode)
VLANMODE
MO
be is being
set to is set
set to
modified. to
SINGLEVLAN.
SINGLEVLAN.
This parameter must
255.255.255.255. No (And no impact on
This
be set parameter
if the value is valid
of Read & Write N/A
the UE in idle mode)
when
VLANMODE is the VLANMAP
MO is being
changed from modified No (And no impact on
and SETPRIO to is Read & Write N/A
SINGLEVLAN
In the VLANMAP MO, the UE in idle mode)
changed
VLANGROUP from during
this parameter
DISABLE is
to ENABLE. valid
modification No (And no impact on
only when of the Read & Write N/A
VLANMAP MO. the UE in idle mode)
VLANMODE is set to
SINGLEVLAN.
None Read Only N/A N/A
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
NoneSCENARIO
The Read & Write N/A
the UE in idle mode)
should be configured
on the basis of actual No (And no impact on
None
physical connection Read & Write N/A
the UE in idle mode)
and meet the following
conditions: 1. When No (And no impact on
None Read & Write N/A
SCENARIO is set to the UE in idle mode)
REGULAR, one RRU
can No (And no impact on
Nonecontrol one RET; Read & Write N/A
2. When SCENARIO is the UE in idle mode)
set to DAISY_CHAIN
No (And no impact on
or Read & Write N/A
the UE in idle mode)
SECTOR_SPLITTING
The
or following
2G_EXTENSION,
If SCENARIO
parameters in a RET
cannot be No (And no impact on
None
The
one is
MO following
RRU set canto control Read & Write N/A
set to the same value: the UE in idle mode)
parameters
more than one
REGULAR, cannot
CTRLCN,RET.be
DEVICENO
set to the samein the RET
SCENARIO
If
MO,
SCENARIO
CTRLSRN,DEVICENO
VENDORCODE and value:
in the
in a RET
in
in a the Read Only N/A N/A
DEVICENAME
MO
CTRLSNis set in tothe in
corresponding RET theto
TMA
RET
RET
all MO,
MO
MO, be
RETSUBUNIT
REGULAR, and
must be
CTRLCN, a
MOs
MO
stringcannot
DEVICENO of 0 or in2inall the
the RAE
If SCENARIO
DEVICENAME
configured
CTRLSRN,
same as thoseon
and inaany
the
in RET
the No (And no impact on
MO.
characters.
MO is set to Read & Write N/A
TMA
same
CTRLSN
other MO,
ANTENNAPORT
RETinMO. the RET the UE in idle mode)
If SCENARIO
REGULAR,
DEVICENAME
MO must bebe
cannot setin
CTRLCN, athe
into
all RET
If
If
MO SCENARIO
SCENARIO
is not set in
in
to a
a RET
RET
CTRLSRN,
VRET MO,
SECTOR_SPLITTING.
same as those and
and in any No (And no impact on
MO
MO is
is
REGULAR, not
not set
set to
to Read & Write N/A
CTRLSN RETinMO.
DEVICENAME
other the RET
in the the UE in idle mode)
REGULAR,
REGULAR,
VENDORCODE CTRLCN, must
MO
RAE
If cannot
MO. be
SCENARIO
CTRLSRN, and alla
in the
RET
SERIALNO
be
same set.as those must inRETbe
any No (And no impact on
MO
CTRLSN
set. is not inset
thisto Read & Write N/A
When
other SCENARIO
RET MO. in a the UE in idle mode)
REGULAR,
MO
When cannot
SCENARIO CTRLCN,
be all the in a
RET
If MO
SCENARIO
CTRLSRN, is set
and to
ininaaRET
same
RET as those
MO is set to No (And no impact on
REGULAR,
MO
CTRLSNisMOnotwith
inset
thisto RET Read & Write N/A
RET
REGULAR,
VENDORCODE must the UE in idle mode)
REGULAR,
MO cannot
SCENARIO CTRLCN,
beset allto the
SERIALNO
be set if must
SERIALNO be
CTRLSRN,
same
REGULAR.
set as those
if VENDORCODE
and in a is No (And no impact on
set.
CTRLSN
RET MO in this RET
with Read & Write N/A
is set. the UE in idle mode)
The
MO following
cannot
SCENARIO besetalltothe
The
same following
parameters
as those must in have
a
REGULAR. No (And no impact on
parameters
a
RETunique must have
MO combination
with Read & Write N/A
the UE in idle mode)
a
of unique
values:combination
SCENARIO 1. set to
of values: 1.
VENDORCODE
REGULAR. and
None
VENDORCODE
SERIALNO in theand RET Read Only N/A N/A
SERIALNO
MO; 2. in the RET
MO; 2.
VENDORCODE and
None
VENDORCODE Read Only N/A N/A
SERIALNO in theand TMA
SERIALNO
MO; 3. in the TMA
MO; No (And no impact on
None3.
VENDORCODE and Read & Write N/A
VENDORCODE
SERIALNO in theand RAE the UE in idle mode)
SERIALNO
MO. in the RAE
MO. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
In a the UE in idle mode)
RETDEVICEDATA
MO, No (And no impact on
Nonewhen BAND4 is Read & Write N/A
In
notaset to UNUSED, the UE in idle mode)
RETDEVICEDATA
BAND3 cannot be set
MO,
to when BAND4
UNUSED. Whenis No (And no impact on
None Read & Write N/A
In
notaset to
BAND3 is UNUSED,
not set to the UE in idle mode)
RETDEVICEDATA
BAND3
UNUSED, cannot
BAND2be set
MO, when No (And no impact on
to
cannot
In a be set to is
UNUSED.
None BAND4
When Read & Write
the UE in idle mode)
N/A
not
BAND3set
UNUSED. tois UNUSED,
not set to
When
RETDEVICEDATA
BAND3
UNUSED, cannot
BAND2betoset
BAND2
MO, when is not set
BAND4 is No (And no impact on
to UNUSED.
None
cannot
UNUSED, be setWhen
to
BAND1 Read & Write N/A
not
BAND3set to UNUSED,
is not set the UE in idle mode)
UNUSED.
cannot
BAND3 be set
cannot tobetoset
When
UNUSED,
BAND2
UNUSED. is BAND2
not set to No (And no impact on
to UNUSED.
cannot
UNUSED, be set When
to
BAND1 Read & Write N/A
In a
BAND3 is not set the UE in idle mode)
UNUSED.
cannot be
RETDEVICEDATA set to to
When
UNUSED,
BAND2
UNUSED. is BAND2
not set to No (And no impact on
MO,
cannotwhen
be setBAND4
to is Read & Write N/A
UNUSED,
In
nota BAND1
set to UNUSED, the UE in idle mode)
UNUSED.
cannot be
RETDEVICEDATA When
set to
BAND4
BAND2 must
is not be
set tois
UNUSED.
MO, when
greater than BAND4
BAND3. No (And no impact on
UNUSED, BAND1 Read & Write N/A
In
nota
When setBAND3
to UNUSED,is not the UE in idle mode)
cannot be
RETDEVICEDATA
BAND4 set be
must to
set to
UNUSED.UNUSED, No (And no impact on
MO,
BAND3 when
greater than
mustBAND4
be is
BAND3. Read & Write N/A
In
notasetBAND3
When to UNUSED,
is not the UE in idle mode)
greater than BAND2.
RETDEVICEDATA
BAND4
set
When must be
to UNUSED,
BAND2 is not
MO, when BAND4 No (And no impact on
greater
None
BAND3 than
must
set to UNUSED, be is
BAND3. Read & Write
the UE in idle mode)
N/A
not
When setBAND3
greater to
thanUNUSED,
is not
BAND2.
BAND2
BAND4 must
must be
be
set
Whento
greaterUNUSED,
BAND2
than is not
BAND1. No (And no impact on
greater
None
BAND3 than
mustBAND3.
set to UNUSED, be Read & Write N/A
When the UE in idle mode)
BAND2BAND3
greater than is not
mustBAND2.
be
set
Whento UNUSED,
BAND2
greater than BAND1.is not
None
BAND3 must be
set to UNUSED, Read Only N/A N/A
greater
BAND2 than mustBAND2.
be
When
greaterBAND2 is not
than BAND1.
None
set to UNUSED, Read Only N/A N/A
BAND2 must be
greater than BAND1. No (And no impact on
None Read & Write N/A
the UE in idle mode)
The value of
SUBNAME must be No (And no impact on
Read & Write N/A
unique in the UE in idle mode)
RETSUBUNIT MOs.
None Read Only N/A N/A
The following
parameters cannot be
set to the same value:
DEVICENAME in the
RET MO,
No (And no impact on
DEVICENAME
If in the Read & Write N/A
the UE in idle mode)
TMA MO,
CONNPN1,CONNPN2
DEVICENAME
,CONNPN3 andin the
None
If
VRET MO,and
CONNPN4 in a Read Only N/A N/A
CONNPN1,CONNPN2
DEVICENAME inMO
VRETSUBUNIT the
,CONNPN3
RAE MO.
are not set toand
NULL, No (And no impact on
CONNPN4 in different.
a Read & Write N/A
they must be the UE in idle mode)
VRETSUBUNIT
Only one MO
are not set to NULL,
VRETSUBUNIT MO No (And no impact on
Read & Write N/A
they
can bemust be different.
connected to a the UE in idle mode)
The
Only value
one of
VANTENNAPORT
SUBNAME
VRETSUBUNIT
MO. mustMO be No (And no impact on
Read & Write N/A
unique in
can be connected to a the UE in idle mode)
VRETSUBUNIT
VANTENNAPORT MOs.
MO.
None Read Only N/A N/A
None
If Read Only N/A N/A
CONNPN1,CONNPN2
,CONNPN3 and
None
CONNPN4 in a Read Only N/A N/A
VRETSUBUNIT MO
are not set to NULL, No (And no impact on
Read & Write N/A
they must be different. the UE in idle mode)
Only one
VRETSUBUNIT MO No (And no impact on
None
If Read & Write N/A
can be connected to a the UE in idle mode)
CONNPN1,CONNPN2
VANTENNAPORT
,CONNPN3 and
MO. No (And no impact on
None
CONNPN4 in a Read & Write N/A
the UE in idle mode)
VRETSUBUNIT MO
are not set to NULL, No (And no impact on
Read & Write N/A
they must be different. the UE in idle mode)
Only one
In
In the
the IPCLKLNK
IPCLKLNKMO MO,
MO, No (And no impact on
VRETSUBUNIT
None
If PT in the DEVIP MO Read & Write N/A
SIP
CIP is
is valid
valid only
only when
when the UE in idle mode)
can be connected
corresponding to to a
an
CNM is not
CNM is not set to set to
VANTENNAPORT
IPCLKLNK MO isand set
L2_MULTICAST
L2_MULTICAST and
MO.
None
to LOOPINT, Read Only N/A N/A
IPMODE
IPMODE is setICPT
is set to in
to
When
the
IPV4.
IPV4. two IPCLKLNK
IPCLKLNK MO
MOs
cannot
In an are beconfigured
IPCLKLNK
When two IPCLKLNK set to MO,
and the values of ICPT Read Only N/A N/A
HW_DEFINED.
SIP
MOs cannot
are be set
configured, to
When
are
If twoboth
0.0.0.0, twosetIPCLKLNK
IPCLKLNK to PTP, MOs
the
MOs values
are of CIP
configured in
the
have combination
been
255.255.255.255, of CN,
configured,
the
and two
the MOs
values mustofDM, be
ICPT Read Only N/A N/A
SRN,
the two
127.x.x.x, SN,
MOs CNM,
or must
0.x.x.x,
the
When
are same
both two when
IPCLKLNK the
CMPST,
have
and the set
should
following
MOs are
and
same to one
be PTP,
conditions
configured ICPT of
the
value.
CLASS combination
DELAYTYPE A, CLASSmust of B,
CN,
be
are
and met:
the 1. ICPT
values of is set
ICPT Read Only N/A N/A
SRN,
the
CLASS same SN,C, CNM,
in the
when DM,
two
the
to
are PTP
CMPST,bothand set
and CNM
to PTP, is not
IPCLKLNK
following
set to MOs.
conditions
L2_MULTICAST
the combination
DELAYTYPE must of CN,
be
are
in met:
the two1.in CNM
MOs; is not
2. Read Only N/A N/A
SRN,
the same SN, CNM,
the DM,
two
set
IPMODE
CMPST,to is MOs.
and set to IPV4
IPCLKLNK
The
in theDM twoisMOs.
L2_MULTICAST;
DELAYTYPE
valid only 2.be
when
IPMODE
In the ICPT is
IPCLKLNK in must
set the
to MO,
Read Only N/A N/A
the same inMO
IPCLKLNK the istwo set
IPV4.
ifIPCLKLNK
CNM is not set
MOs. to
to
In PTP.
the IPCLKLNK
L2_MULTICAST and MO,
When two Read Only N/A N/A
SIP
IPMODE and isIPCLKLNK
CIP must
set to be
MOs
set to are configured
different
IPV4, CIP cannot be values
and
set tothe
when CNMvalues
0.0.0.0, is notof set
ICPT
Read Only N/A N/A
are
to both set
L2_MULTICAST
255.255.255.255, to PTP,
the
and combination
IPMODE
127.x.x.x, of CN,
is set
or 0.x.x.x, to
SRN,
IPV4. SN, CNM,
and should be one of DM,
CMPST,
When
CLASStwo A,and
IPCLKLNK
CLASS B,
DELAYTYPE
MOs
CLASS must be
areC.configured on
the
the
In thesame
same in
board,two
IPCLKLNK the the
MO,
IPCLKLNK
values
SIP andofCIP SIPMOs.in thebe
must
two MOs must
set to different values be
In the IPCLKLNK MO,
PROFILETYPE
The CNM is validisonly valid
only
whenwhenICPTCNM
in theis set
to UNICAST.
IPCLKLNK MO is set
If PROFILETYPE
to PTP. in
the
When IPCLKLNK MO is
two IPCLKLNK
set
MOstoareG.8265.1,
configured
CLKSYNCMODE
and the values of ICPTin
the Read Only N/A N/A
are both set to PTP, be
TASM MO must
set
the to FREQ.
combination of CN,
When
SRN, SN, two CNM,
IPCLKLNKDM, No (And no impact on
Read & Write N/A
MOs
CMPST, are and
configured, the UE in idle mode)
the values of must be
DELAYTYPE
PROFILETYPE
the
None same in the twoin the Read Only N/A N/A
two
IPCLKLNK MOs. the
MOs must be
same when the
following
None conditions
This parameter is valid Read Only N/A N/A
are
only when The values
met: 1.
of ICPT are both set to
BASEBANDEQMTYP
PTP; 2. The values of Read Only N/A N/A
E in the
CNM are both set MO
BASEBANDEQM to
UNICAST.
is set to UL or ULDL.
None Read Only N/A N/A
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None
LONGITUDEDEGFOR Read & Write N/A
the UE in idle mode)
MAT and
LATITUDEDEGFORM No (And no impact on
If
ATGCDF
None is set
are valid to when
only Read & Write N/A
Second, this is set to the UE in idle mode)
this parameter
LATITUDESECFORM
Degree. No (And no impact on
AT must be specified Read & Write N/A
LONGITUDESECFOR the UE in idle mode)
in
MATthe format of
and
This parameter
dd:mm:ss.ssss. is
ddvalid
LATITUDESECFORM No (And no impact on
only whenthe
indicates GCDF
degreeis set Read & Write N/A
AT are valid only when the UE in idle mode)
to Degree.
ranging from -90
this parameter is to
set to
+90, mm
Second. indicates the No (And no impact on
Read & Write N/A
minute ranging from 0 the UE in idle mode)
to 59, and ss.ssss
indicates
If GCDF isthesetsecond
to No (And no impact on
None Read & Write N/A
ranging
Second, this 0 to
from the UE in idle mode)
59.9999. The value
LONGITUDESECFOR
range
MAT of this
Nonemust be specified Read Only N/A N/A
parameter
in the formatis from
of -
This parameterto
90:00:00.0000
ddd:mm:ss.ssss. isddd
valid
No (And no impact on
only
indicates the degreeset
when GCDF
+90:00:00.0000. is Read & Write N/A
the UE in idle mode)
to Degree.
ranging from -180 to
+180, mm indicates No (And no impact on
Read & Write N/A
the minute ranging the UE in idle mode)
from 0 to 59, and
ss.ssss No (And no impact on
None indicates the Read & Write N/A
second ranging from 0 the UE in idle mode)
to 59.9999. The value
range No (And no impact on
None of this Read & Write N/A
parameter is from - the UE in idle mode)
180:00:00.0000 to No (And no impact on
None
+180:00:00.0000. Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the same
None
RAT/frequency priority Read Only N/A N/A
group specified by
RatFreqPriorityGroupI No (And no impact on
Read & Write N/A
d, frequencies used for the UE in idle mode)
different RATs must be
assigned different No (And no impact on
None Read & Write N/A
priorities. the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
signs (=), single
quotation marks ('),
three or more
consecutive plus signs
(+), two or more
consecutive spaces,
and two or more
consecutive No (And no impact on
None
percentage signs (%). Read & Write N/A
the UE in idle mode)
Due to the limitations
defined in the S1 No (And no impact on
Read & Write N/A
interface protocol (For the UE in idle mode)
details, see 3GPP TS
36.413),
None the value of Read & Write Yes eNodeB
eNodeBFunctionName
can contain only the
following valid No (And no impact on
None Read & Write N/A
characters: upper-case the UE in idle mode)
letters (A to Z), lower- No (And no impact on
Noneletters (a to z),
case Read & Write N/A
the UE in idle mode)
digits (0 to 9), single
blank ( ), apostrophe No (And no impact on
None
('), left brackets ((), Read & Write N/A
the UE in idle mode)
right brackets ()), one
or two plus sign (+), No (And no impact on
None
hyphens (-), full stops Read & Write N/A
the UE in idle mode)
Mcc in each
(.), and American
X2AutoSetupOperator
This
Standardparameter
Code is forvalid Read Only N/A N/A
MO
only consists
when theof digits
Information
Mnc
only. in each (ASCII)
BfMimoAdaptiveSwitch
Interchange
X2AutoSetupOperator
parameter is set to
codes. All invalid Read Only N/A N/A
MO consists
NO_ADAPTIVE.
characters containedof digits
only.
The
in thesetting
eNodeB of this
name
parameter
None
are replaced determines
with Read Only N/A N/A
the transmission
hyphens (-) whenmode an
that
eNodeB appliessendsto UEs No (And no impact on
None
served
messages by atomulti-
the NEs Read & Write N/A
the UE in idle mode)
antenna
in the EPC eNodeB.
throughThe S1
transmission
interfaces. modes No (And no impact on
None
vary with the Read & Write N/A
the UE in idle mode)
application scenarios:
1. TM2 applies to UEs No (And no impact on
None
with low SINR and a Read & Write N/A
the UE in idle mode)
high speed.
2.
This
NoneTM3 applies to
parameter is UEs
valid Read Only N/A N/A
with
only high
whenSINR the and a
high
BfSwitchspeed. check box is
3. No (And no impact on
selectedapplies
TM4 in the to UEs Read & Write N/A
with high SINR and a the UE in idle mode)
BfAlgoSwitch
low speed. under the
parameter No (And no impact on
4. TM7 applies to
CellAlgoSwitch
This parameter is UEs
MO.valid Read & Write N/A
the UE in idle mode)
with low
only when the SINR and a
low speed.
BfMimoAdaptiveSwitch No (And no impact on
5. TM8 applies Read & Write N/A
parameter is settotoUEs the UE in idle mode)
with high SINR and a
MIMO_BF_ADAPTIVE
low
.None speed.
6. Read Only N/A N/A
This parameterapplies
TM9w/oPMI must
to
beUEs
set forwith highaSINR
using fixed
and No (And no impact on
Nonea low
PDSCH speed.
power if Read & Write N/A
7. TM9wPMI applies to
PdschSpsPcSwitch the UE in idle mode)
UEs
underwith thehigh SINR
and a low speed. No (And no impact on
DlPcAlgoSwitch Read & Write N/A
The throughput and off the UE in idle mode)
parameter is turned
coverage achieve
and the DlIcicSwitch the
best
Noneperformance
parameter is set toonly Read Only N/A N/A
when the setting of this
DlIcicSwitch_OFF_EN
parameter
UM. match the No (And no impact on
None and speed
SINR Read & Write N/A
the UE in idle mode)
mobility of UEs.
Otherwise, the
performance is worse
than that with the
optimal transmission
mode.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
This
Noneparameter is valid Read Only N/A N/A
only when the
BfSwitch option of the
No (And no impact on
BfAlgoSwitch Read & Write N/A
This parameter the UE in idle mode)
parameter in theis valid
only when the
CellAlgoSwitch MO is No (And no impact on
MimoAdaptiveSwitch
cleared. Read & Write N/A
the UE in idle mode)
parameter is set to
OC_ADAPTIVE. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read Only N/A
the UE in idle mode)
No (And no impact on
None Read Only N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
none Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
None Read & Write Yes LMPT borad
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
The CpEpGroupId
value in each S1 MO Read & Write Yes Cell
must be unique.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in an
No (After idleS1
mode)
interface is blocked,
None Read & Write UEs in idle mode N/A
cannot access the
network.)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
The CpEpGroupId
value in each X2 MO Read & Write Yes eNodeB
must be unique.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
This parameter is valid the UE in idle mode)
only when the
No (And no impact on
CqiPeriodAdaptive Read & Write N/A
the UE in idle mode)
parameter is set to
OFF(Off).
None Read & Write Yes eNodeB
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
LOFD-001105 /
No (And no impact on
TDLOFD- Read & Write N/A
the UE in idle mode)
001105:Dynamic DRX
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None
In the Read & Write N/A
the UE in idle mode)
CellDynAcBarAlgoPar
a MO, No (And no impact on
In the Read & Write N/A
DynAcBarTriggerThd the UE in idle mode)
CellDynAcBarAlgoPar
must be greater than
a MO,
DynAcBarCancelThd. No (And no impact on
Read & Write N/A
DynAcBarTriggerThd the UE in idle mode)
must be greater than
DynAcBarCancelThd.
None Read Only N/A N/A
If the LowPwrSwitch
parameter is set to
ON, No (And no impact on
Nonethe LowPwrOrder Read & Write N/A
parameter must be the UE in idle mode)
set.
No (And no impact on
If the LowPwrSwitch Read & Write N/A
the UE in idle mode)
parameter is set to
OFF, the
None
LowPwrOrder Read Only N/A N/A
parameter does not
need to be set. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
PresenceAntennaPort
No (And no impact on
1 must be set as Read & Write N/A
the UE in idle mode)
required.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
When both of
DSCPRemarkSwitch(D
None
SCPRemarkSwitch) Read Only N/A N/A
and
FPIGTPUSwitch(FPIG No (And no impact on
Read & Write N/A
TPUSwitch) are turned the UE in idle mode)
on, only the former
ralated No (And no impact on
None feature is Read & Write N/A
enabled actually, but the UE in idle mode)
not the later.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the No (And no impact on
None
InterRatCellShutdown Read & Write N/A
the UE in idle mode)
MO, the sum of values
In
of the
UtranCellDlLoadThd No (And no impact on
InterRatCellShutdown Read & Write N/A
and the UE in idle mode)
MO, the sum of values
UtranCellDlLoadOffset
In
of the
UtranCellUlLoadThd
must be less than or No (And no impact on
InterRatCellShutdown Read & Write N/A
and
equal to 100. the UE in idle mode)
MO, the sum of values
UtranCellUlLoadOffset
of GeranCellLoadThd
must be less than or No (And no impact on
Read & Write N/A
and
equal to 100. the UE in idle mode)
GeranCellLoadOffset
must
None be less than or Read Only N/A N/A
equal to 100.
If No (And no impact on
None Read & Write N/A
PrachConfigIndexCfgI the UE in idle mode)
nd in the RACHCfg
MO
None is set to Read Only N/A N/A
NOT_CFG and the
RachAdjSwitch option
No (And no impact on
is selected, the RACH Read & Write N/A
the UE in idle mode)
resources in the cell
can be adaptively No (And no impact on
None
adjusted based on the Read & Write N/A
the UE in idle mode)
access type and the
number of access
None
attempts. Read & Write Yes Cell
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In a CellAlgoSwitch
MO, No (And no impact on
Nonethe Read & Write N/A
InterFreqIdleMlbSwitch the UE in idle mode)
and
No (And no impact on
UtranIdleMlbSwitch Read & Write N/A
the UE in idle mode)
under the
MlbAlgoSwitch
In cannot
the CellAlgoSwitch No (And no impact on
None
be
MO,turned
whenon the Read & Write N/A
the UE in idle mode)
simultaneously.
PucchPcDtxSinrSwitch
in UlPcAlgoSwitch is No (And no impact on
Read & Write N/A
ON, the the UE in idle mode)
InnerLoopPucchSwitch
in UlPcAlgoSwitch No (And no impact on
None Read & Write N/A
must be ON. the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
None
In the CellDlschAlgo Read & Write Yes Cell
MO,
OtherServiceWeight No (And no impact on
Read & Write N/A
must be greater than the UE in idle mode)
or equal to
BtServiceWeight. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
None
In the CellMLB MO, Read Only N/A N/A
the sum of
InterFreqMlbThd and No (And no impact on
In the CellMLB MO, Read & Write N/A
LoadOffset must be the UE in idle mode)
the sum of
smaller than or equal
InterRatMlbThd
to 100. and No (And no impact on
Read & Write N/A
LoadOffset must be the UE in idle mode)
smaller than or equal
to 100. No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
None Read Only N/A N/A
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
This parameter can be
manually configured
only when
PucchSwitch under the
PucchAlgoSwitch
parameter in the No (And no impact on
None Read & Write N/A
CellAlgoSwitch MO is the UE in idle mode)
set to Off.
This No (And no impact on
Noneparameter must Read & Write N/A
be properly set so that the UE in idle mode)
the PRACH RBs are
If RachAdjSwitch
strictly confined ininthe Read & Write Yes Cell
the
cell CellAlgoSwitch
bandwidth. MO
is turned on and
Otherwise, the cell this
parameter
cannot isofset
thisto
be activated.
The setting Read & Write Yes Cell
CFG,
This this parameter
parameter takesmust
parameter effect
takes
only precedence
be properly
when set so over
the that
RachAdjSwitch.
the PRACH RBs and Read & Write Yes Cell
PrachConfigIndexCfgI
PUCCH
nd RBs do
parameter not to
is set
overlap
CFG. in the No (And no impact on
None Read & Write N/A
frequency domain. the UE in idle mode)
Otherwise, the cell
cannot No (And no impact on
None be activated. Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
This parameter can be the UE in idle mode)
set only if
None
PucchAlgoSwitch in Read Only N/A N/A
This parameter canMO
the CellAlgoSwitch be
set only ifoff.
is turned
None
PucchAlgoSwitch
Otherwise, the in Read & Write Yes Cell
the CellAlgoSwitch
parameter MO
setting does
is
notturned off.
take effect.
Otherwise, Read & Write Yes Cell
This in
Mcc an the must
parameter
parameter
be properly setting
set so does
EutranExternalCellPlm that
not
the take
PRACH effect.
RBs and
n MO consists of digits Read & Write Yes Cell
This
In anparameter
PUCCH
only. RBs domust
not
be properly
overlap
In an set so that
EutranExternalCellPlm
in the
the
n PRACH
MO,
frequency RBs and
the combination
domain.
EutranExternalCellPlm Read Only N/A N/A
PUCCH
of Mnc RBs
and
Otherwise, docell
Mcc
the not
must
n MO, the combination
overlap
be
cannot in
different
be the
from that
activated.
of Mnc and Mcc must
frequency
of
be differentdomain.
ShareMnc andthat
from Read Only N/A N/A
Otherwise,
ShareMcc.
of ShareMnc theand
cell
cannot
Mnc be
in an
ShareMcc. activated.
None
EutranExternalCellPlm Read Only N/A N/A
n MO consists of digits
only.
None Read Only N/A N/A
In an
EutranExternalCellPlm
n MO, the combination
In
of an
Mnc and Mcc must
EutranExternalCellPlm
be different from that
n
ofMO, the combination
ShareMnc and Read Only N/A N/A
of Mnc and Mcc must
ShareMcc.
be differentinfrom
ShareMcc an that
of ShareMnc
EutranExternalCellPlmand Read Only N/A N/A
ShareMcc.
n MO consists of digits
ShareMnc
only. in an
None
EutranExternalCellPlm Read Only N/A N/A
In a
n MO consists of digits
GeranExternalCellPlm
only.
n MO, the combination
None Read Only N/A N/A
In Mnc
of a and Mcc must
GeranExternalCellPlm
be different from that
n
ofMO, the combination
ShareMnc and Read Only N/A N/A
In
of a
Mnc
ShareMcc. and Mcc must
GeranExternalCellPlm
be
Mccdifferent
in a from that
n
of MO, the combination
ShareMnc
GeranExternalCellPlm and Read Only N/A N/A
In
of a
Mncconsists
ShareMcc. and Mccofmust
n MO
GeranExternalCellPlm digits
be
Mnc different
only. in a from that
n
of MO, the combination
ShareMnc
GeranExternalCellPlm and Read Only N/A N/A
Mcc
of Mncin aand Mcc must
ShareMcc.
n MO consists
UtranExternalCellPlmn of digits
be differentinfrom
ShareMcc
only. a that
MO
of consists of
ShareMnc
GeranExternalCellPlm anddigits Read Only N/A N/A
In a
only.
ShareMcc.
n MO consists of digits
UtranExternalCellPlmn
In a
ShareMnc
only. in a
MO, the combination
UtranExternalCellPlmn
GeranExternalCellPlm Read Only N/A N/A
of
MO,Mnc
n MO the and Mccofmust
combination
consists digits
be
of different
Mnc
only. and Mccfrom must
that
of
beShareMnc
different from andthat Read Only N/A N/A
ShareMcc.
of ShareMnc and
Mnc in a
ShareMcc.
None
UtranExternalCellPlmn Read Only N/A N/A
In a
MO consists of digits
UtranExternalCellPlmn
only.
SectorId104
MO, in the
the combination
None
Cdma2000HrpdExtCell Read Only N/A N/A
In Mnc
of a and Mcc must
MO must befrom set to
UtranExternalCellPlmn
be different a
SectorId24
hexadecimal
MO, the thethat
innumber
combination
of ShareMnc and
Cdma2000HrpdExtCell Read Only N/A N/A
starting
of Mnc and
ShareMcc. withMcc0x andmust
MO
with
be must
a totalbe
different set to
length
from a
not
that
ShareMcc
hexadecimal in anumber
greater
of than
ShareMnc and 26
UtranExternalCellPlmn digits. Read Only N/A N/A
starting
A with 0x and
hexadecimal
MO consists of number
ShareMcc. digits
with
is a total
composed
ShareMnc length
in not
of upper-
a
only.
greater
case letters (A to F) A
than 6
UtranExternalCellPlmn digits. Read Only N/A N/A
hexadecimal
and digits
MO consists (0 to number
of 9). Theis
digits
composed
hexadecimal
only. of upper-
digit
case letters
following 0x (A cantobe F) 0 Read Only N/A N/A
and digits (0 to
only if the parameter 9). The is
hexadecimal digit
set to 0x0. That is, the
None
following
parameter0xvalue can belike0 Read Only N/A N/A
only
0x00ABif theis parameter is
set to 0x0. That
inappropriate butis,0x0
the
None
parameter value like Read Only N/A N/A
is acceptable.
Mcc
0x00ABin anis
Cdma2000HrpdExtCell
inappropriate
In the but 0x0 No (And no impact on
Read & Write N/A
MO
is consists
acceptable.
Cdma2000ExternalCellof digits the UE in idle mode)
Mnc
only. in an
MO, CellName is a
Cdma2000HrpdExtCell No (And no impact on
string of a maximum Read & Write N/A
MO consists of digits of the UE in idle mode)
99 characters.
only. The
string cannot be null No (And no impact on
None
characters or contain Read & Write N/A
the UE in idle mode)
any of the following
characters:double No (And no impact on
Read & Write N/A
quotation marks ("), the UE in idle mode)
commas (,),
semicolons (;), equal
signs (=), single
quotation marks ('),
three plus signs (+),
two or more blanks,
and two or more
None Read Only N/A N/A
No (And no impact on
None Read & Write N/A
the UE in idle mode)
None
If Read Only N/A N/A
Cdma20001XrttCellRe
selInd is set to CFG, No (And no impact on
None
Cdma20001XrttCellRe Read & Write N/A
the UE in idle mode)
selPri must be set.
If No (And no impact on
If Read & Write N/A
Cdma20001XrttCellRe the UE in idle mode)
Cdma2000HrpdCellRe
selInd is set to
selInd is set to CFG,
NOT_CFG, No (And no impact on
None
Cdma2000HrpdCellRe Read & Write N/A
Cdma20001XrttCellRe the UE in idle mode)
selPri
selPri must
does be
notset.
need to
If
be set. No (And no impact on
Read & Write N/A
Cdma2000HrpdCellRe the UE in idle mode)
selInd is set to
NOT_CFG, No (And no impact on
None Read & Write N/A
Cdma2000HrpdCellRe the UE in idle mode)
selPri
Mcc indoes
a not need to
be set.
GeranExternalCell MO Read Only N/A N/A
consists of digits only.
Mnc in a
GeranExternalCell MO Read Only N/A N/A
consists of digits only.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the
GeranExternalCell No (And no impact on
None Read & Write N/A
MO, the value of the UE in idle mode)
CellName is a string of
a maximum of 99 No (And no impact on
None Read & Write N/A
characters. The string the UE in idle mode)
cannot be all null
characters or contain No (And no impact on
None Read & Write N/A
any of the following the UE in idle mode)
characters:double
No (And no impact on
quotation marks ("), Read & Write N/A
the UE in idle mode)
commas (,),
semicolons (;), equal
None
signs (=), single Read Only N/A N/A
quotation marks ('),
Mcc
threeinconsecutive
a GeranNcellplus
MO consists of digits
signs (+++), two or Read Only N/A N/A
only.
more
Mnc inconsecutive
a GeranNcell
blanks, and two
MO consists or
of digits Read Only N/A N/A
more
only. consecutive
percentage signs (%).
None Read Only N/A N/A
None Read Only N/A N/A
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
In the
EutranIntraFreqNCell No (And no impact on
None Read & Write N/A
MO, the value of the UE in idle mode)
In the
LocalCellName is a
EutranIntraFreqNCell
string of a maximum of No (And no impact on
None
MO, the value of Read & Write N/A
99 characters. The the UE in idle mode)
NeighbourCellName
string cannot be all null is
a string
characters of a maximum
or contain No (And no impact on
None Read & Write N/A
of
any 99ofcharacters.
the following The the UE in idle mode)
string cannot be all null
characters:double
characters or contain No (And no impact on
quotation marks ("), Read & Write N/A
any of the following the UE in idle mode)
commas (,),
characters:
semicolons double (;), equal No (And no impact on
quotation
signs (=), marks
single ("), Read & Write N/A
the UE in idle mode)
commas
quotation (,),
DlEarfcn
semicolons inmarks
an ('),
(;), equal
three consecutive
EutranInterNFreq plus
MO
None
signs
signs (=),
(+++),single
two or Read Only N/A N/A
must be amarks
quotation valid
more consecutive('),
frequency.
three
blanks, consecutive
and two orplus
In
signsan EutranInterNFreq
(+++), two or Read Only N/A N/A
more
UlEarfcn consecutive
in an
In anifEutranInterNFreq
MO, DlEarfcn is
more consecutive
percentage
EutranInterNFreq
MO, if DlEarfcn signs is (%).
MO
specific
blanks, to
and band
two 29,or No (And no impact on
must
specificbe a
to
UlEarfcnCfgInd valid
band 29,
must Read & Write N/A
more consecutive
frequency. the UE in idle mode)
UlEarfcnCfgInd
be set to NOT_CFG. must
percentage
If
beUlEarfcnCfgInd signs is
set to NOT_CFG. (%).
set
No (And no impact on
to CFG, UlEarfcn must Read & Write N/A
the UE in idle mode)
No (Modifications on
be set.
If UlEarfcnCfgInd is set this parameter would
None
to NOT_CFG, UlEarfcn Read & Write affect cell reselection N/A
A
doeslarger
notvalue
need of to this
be No (Modifications
of the UE in idle on
parameter
set. leads to a this
mode.)parameter would
None probability of a
lower Read & Write affect cell reselection N/A
cell meeting criteria S No (Modifications
of the UE in idle on
and becoming a this
mode.)parameter would
None
suitable cell for cell Read & Write affect cell reselection N/A
No (Modifications
of the UE in idle on
selection. A smaller
this
mode.)parameter would
value of this parameter
Read & Write affect cell reselection N/A
leads to a higher No (Modifications
of the UE in idle on
probability. Set this this parameter will
mode.)
parameter
None properly so Read & Write affect cell reselection N/A
The sumselected
that the of cell No (Modifications
of the UE in idle on
IdleMlbUEReleaseRati
can provide signals this
mode.)parameter will
o in all
that meet the quality Read & Write affect cell reselection N/A
EutranInterNFreq
requirement of basic MOs
of the UE in idle
of the
services. same cell
mode.)
No (And no impact on
cannot
None exceed 100. Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
Mcc in an
EutranExternalCell MO Read Only N/A N/A
consists of digits only.
Mnc in an
EutranExternalCell MO Read Only N/A N/A
consists of digits only.
No (And no impact on
None Read & Write N/A
This parameter is the UE in idle mode)
optional, depending on
No (And no impact on
the setting of Read & Write N/A
the UE in idle mode)
CellReselPriorityCfgIn
d.
None Read Only N/A N/A
Mcc in a UtranNCell
MO consists of digits Read Only N/A N/A
only.
Mnc in a UtranNCell
MO consists of digits Read Only N/A N/A
only.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
This parameter is the UE in idle mode)
optional, depending on
No (And no impact on
the setting of Read & Write N/A
the UE in idle mode)
CellReselPriorityCfgIn
d.
None Read Only N/A N/A
1.
NoneIf Read Only N/A N/A
UtranUlArfcnCfgInd is
set to CFG,
UtranUlArfcn must be No (And no impact on
None Read & Write N/A
set. If the UE in idle mode)
UtranUlArfcnCfgInd is
No (And no impact on
set to NOT_CFG, Read & Write N/A
the UE in idle mode)
UtranUlArfcn does not
If
need to be set.
CellReselPriorityCfgIn No (And no impact on
None
2.
d isThesetDL UARFCN
to CFG, Read & Write N/A
the UE in idle mode)
and UL UARFCNmust
CellReselPriority must
in the same
be set. No (And no impact on
frequency band. Read & Write N/A
If the UE in idle mode)
CellReselPriorityCfgIn
Mcc in a
d is set to NOT_CFG,
UtranExternalCell MO Read Only N/A N/A
CellReselPriority does
consists of digits only.
not
Mncneed in a to be set.
UtranExternalCell MO Read Only N/A N/A
consists of digits only.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
When
UtranUlArfcnCfgInd is No (And no impact on
None Read & Write N/A
set to CFG, the UE in idle mode)
In a UtranExternalCell
UtranUlArfcn
MO, PScrambCode must be
No (And no impact on
set.
cannot exceed 127 if Read & Write N/A
the UE in idle mode)
If UtranUlArfcnCfgInd
In the
UtranFddTddType is
is
setset
to to NOT_CFG,
UtranExternalCell
UTRAN_TDD. MO, No (And no impact on
UtranUlArfcn
the does not Read & Write N/A
In
In avalue
a
need
of CellName
UtranExternalCell
UtranExternalCell
to be configured.
the UE in idle mode)
is
MO,
MO,a string of a
ifPScrambCode
maximum of 99127isif
UtranFddTddType No (And no impact on
cannot exceed Read & Write N/A
characters.
set The string
to UTRAN_TDD, the UE in idle mode)
UtranFddTddType is
cannot
MultiBand be all
is
set to UTRAN_TDD. null
forbidden.
characters or contain No (And no impact on
None Read & Write N/A
any of the following the UE in idle mode)
characters:double
No (And no impact on
quotation marks ("), Read & Write N/A
the UE in idle mode)
commas (,),
semicolons (;), equal
None
signs (=), single Read Only N/A N/A
quotation marks ('), This command affects
three consecutive plus all cells established on
None
signs (+++), two or Read & Write Yes
LBBPd3 boards in the
more consecutive eNodeB.
blanks, All SFN cells in the
None and two or Read & Write Yes
more consecutive eNodeB
percentage
PccDlEarfcnsigns in an(%).
PccFreqCfg MO must Read Only N/A N/A
be a valid frequency.
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
If the
None
ServiceReqInterFreqH Read Only N/A N/A
oSwitch checkbox
under the
None
HoAlgoSwitch Read Only N/A N/A
parameter in the
ENodeBAlgoSwitch
None is Read & Write N/A N/A
selected, the
ServiceBasedInterFreq
HoSwitch, No (And no impact on
None Read & Write N/A
UtranServiceHoSwitch, the UE in idle mode)
GeranServiceHoSwitc
h, No (And no impact on
None Read & Write N/A
CdmaHrpdServiceHoS the UE in idle mode)
witch, or No (And no impact on
None
Cdma1xRttServiceHoS Read & Write N/A
the UE in idle mode)
witch check box under
the HoAlgoSwitch No (And no impact on
None
parameter in the Read & Write N/A
the UE in idle mode)
ENodeBAlgoSwitch
cannot be selected. No (And no impact on
Read & Write N/A
If any of the the UE in idle mode)
ServiceBasedInterFreq
Cells with customized
HoSwitch,
bandwidths support No (And no impact on
None Read & Write N/A
UtranServiceHoSwitch,
only static ICIC. The the UE in idle mode)
GeranServiceHoSwitc
DlIcicDynamicSwitch_
h, No (And no impact on
ON_ENUM and Read & Write N/A
CdmaHrpdServiceHoS the UE in idle mode)
DlIcicReuse3Switch_O
witch,
N_ENUM or values do No (And no impact on
None
Cdma1xRttServiceHoS
not take effect for Read & Write N/A
the UE in idle mode)
witch checkbox
these cells. under
the HoAlgoSwitch No (And no impact on
None
parameter in the Read & Write N/A
the UE in idle mode)
ENodeBAlgoSwitch is
selected, the
ServiceReqInterFreqH
oSwitch check box
under the
HoAlgoSwitch
parameter in the
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
No (And no impact on
None Read & Write N/A
the UE in idle mode)
The sum of TrfRatio in
all
None LicRatioSharePolicy Read Only N/A N/A
MOs cannot exceed
100.
No (And no impact on
In the Read & Write N/A
the UE in idle mode)
LicRatioSharePolicy
MO, TrfSharingRatio
None exceed
cannot Read & Write Yes Cell
TrfRatio.
In the
eNodeBAutoPowerOff No (And no impact on
None
MO, PowerOffTime Read & Write N/A
the UE in idle mode)
In
mustthebe set to a time
eNodeBAutoPowerOff
in the range of
None
MO, PowerOnTime Read & Write Yes Cell
22:00:00 to 05:00:00
must
of thebe setday.
next to a time
in
In
Nonethe
the range of Read & Write Yes eNodeB
23:00:00 to 06:00:00
eNodeBAutoPowerOff
of
MO, thethe
next day.of
value
In the
PowerOnTime must be Read & Write Yes eNodeB
eNodeBAutoPowerOff
one hour later than
MO,
that ofthePowerOffTime.
value of
PowerOnTime must be
If AutoPowerOffSwitch Read & Write Yes eNodeB
one
is sethour later than
to ON,
that of PowerOffTime.
PowerOffTime must be No (And no impact on
None
If AutoPowerOffSwitch
set. Read & Write N/A
the UE in idle mode)
is set to ON,
If AutoPowerOffSwitch
PowerOnTime
is set to OFF, must be
N/A
set. Read Only N/A N/A
PowerOffTime does
If
notAutoPowerOffSwitch
need to be set.
is
N/A to OFF,
set Read Only N/A N/A
PowerOnTime does
not need to be set.
N/A Read Only N/A N/A