Professional Documents
Culture Documents
MASONRY MORTAR
VERSATILE & COST EFFECTIVE GENERAL PURPOSE MORTAR
PRODUCT DESCRIPTION
2021.12.09
TECHNICAL DATA
Mixing 1)
Pot Life 2)
@ 20°C > 120 min.
LIMITATIONS
The installation should be protected from
F12 Spatterdash
significant drying influences such as direct
Concrete Substrate sunlight, strong wind or high temperatures for at
least 48 hours.
MIXING
Avoid traffic or heavy use until sufficient
Masonry Mortar: strength has developed.
Pour 5.5 – 6.0 L potable water into a clean
vessel. Slowly add OPTIMIX F12 powder into HEALTH AND SAFETY
the mixing vessel. Mix the mixture with a forced OPTIMIX F12 is alkaline in nature and can
action mixer until all powder has been added. cause irritations to persons with sensitive skin.
Mix the mixture for about 5 minutes or until a Avoid inhalation of dust and contact with skin
homogeneous state is achieved. The material is and eyes. Wear suitable protective gloves and
ready to use. masks while handling the product. If contact
Screed Mortar: with eyes, rinse immediately with plenty of clean
As for Masonry Mortar, initial water addition water and seek medical advice. This product is
may be reduced to 5.0 L or even less if a dry non-toxic and is not flammable.
mix screed is required.
STORAGE ALTERNATIVE PRODUCTS
Store the products in a cool and dry place with Procrete
the original unopened bags on pallets with
plastic wrapping. Protect from direct sunlight,
rainfall and exposure to high humidity
conditions. Avoid excessive stacking of pallets.
Failure to comply with the recommended
storage conditions may result in premature
deterioration of the product or packaging and
reduce shelf life.
Important Note: The information contained herein is, the best of our knowledge, true and reliable and is supported by the present state of our knowledge. No warranty
is given or implied in connection with any recommendations or suggestions made by us or our representatives as the conditions of use and any labour involved are
beyond our control.