Professional Documents
Culture Documents
User Manual
WL-520g Wireless Router User Manual
Index
1
WL-520g Wireless Router User Manual
1. Package Contents
Technical support
General support: +1-502-995-0883 Support (fax): +1-502-933-8713
Online support: http://vip.asus.com/eservice/techserv.aspx
Technical support
Components: +49-2102-95990 Online support: www.asuscom.de/support
Notebook: +49-2102-959910 Support (fax): +49-2102-959911
2
WL-520g Wireless Router User Manual
Modem
Power Phone
2
Wall power outlet
3
2) Status Indicators
Wall power outlet
Modem
ASUS Wireless Router
PWR (Power)
Off 4 No power
On System ready
Wall power outlet
Off No power
On Wireless system ready
Wall telephone outlet WAN
3
WL-520g Wireless Router User Manual
Bottom Side
11cm (4.33in)
4
WL-520g Wireless Router User Manual
The ASUS Wireless Router can be configured to meet various usage scenarios.
Some of the factory default settings may suit your usage; however, others may need
changing. Prior to using the ASUS Wireless Router, you must check the basic settings
to guarantee it will work in your environment. Configuring the ASUS Wireless Router
is done through a web browser. You need a Notebook PC or desktop PC connected
to the ASUS Wireless Router (either directly or through a hub) and running a web
browser as a configuration terminal. The connection can be wired or wireless. For
the wireless connection, you need an IEEE 802.11g/b compatible device, e.g. ASUS
WLAN Card, installed in your Notebook PC. You should also disable WEP and set
the SSID to “default” for your wireless LAN device. If you want to configure the ASUS
Wireless Router or want to access the Internet through the ASUS Wireless Router,
TCP/IP settings must be correct. Normally, the TCP/IP setting should be on the IP
subnet of the ASUS Wireless Router.
Note: Before rebooting your computer, the ASUS Wireless Router should be
switched ON and in ready state.
Wireless-Connection
Note: If configuration is done via wired connection, ignore this.
Refer to your wireless adapter userʼs manual on associating with the ASUS Wireless
Router. The default SSID of the ASUS Wireless Router is “default” (lower case),
encryption is disabled and open system
authentication is used.
5
WL-520g Wireless Router User Manual
Note: Before rebooting your PC, the ASUS Wireless Router should be switched
ON and in ready state.
Setting IP Manually
If you want to set your IP address manually,
the following default settings of the ASUS
Wireless Router should be known:
• IP address 192.168.1.1
• Subnet Mask 255.255.255.0.
If you set your computerʼs IP manually, it
needs to be on the same segment. For
example:
• IP address 192.168.1.xxx (xxx can be any
number between 2 and 254 that is not used
by another device)
• Subnet Mask 255.255.255.0 (same as the ASUS Wireless Router)
• Gateway 192.168.1.1 (this is the ASUS Wireless Router)
• DNS 192.168.1.1 (ASUS Wireless Router IP address or your own).
Defaults
User name: admin Password: admin
3
After logging in, you will see the ASUS Wireless Router home page.
The homepage displays quick links to configurate the main features of the router.
6
WL-520g Wireless Router User Manual
4) Quick Setup
To start quick setup, click Next to enter the “Quick Setup”
page. Follow the instructions to setup the ASUS Wireless
Router.
ASUS wireless router WL520g supports five types of ISP services— cable, ADSL
(PPPoE, PPTP, static IP address), and Telstra BigPond. Since each service has its
own protocols and standards, therefore, during the setup process, there are different
identity settings demanded by WL-520g. Select the correct connection type. Click
Next to continue.
Cable User
If you are receiving services from cable or other ISP assigning IP addresses
automatically, please select Cable Modem or other connection that gets IP
automatically. If you are using cable services, your ISP may have provided you with
hostname, MAC address, and heartbeat server, if true, please fill these information
into the boxes on the setting page; if not, click Next to skip this step.
7
WL-520g Wireless Router User Manual
PPPoE User
If you are PPPoE service user, pleae select the second line. You would be required
to input the username and password provided by your ISP.
PPTP User
If you are using PPTP services, you would be asked to input the username,
password, as well as IP address provided by your ISP.
herk036@adsl-comfort
Static IP User
If you are using ADSL or other connection type that uses static IP addresses, please
select the fourth line, then input the IP address, subnet mask, and default gateway
provided by your ISP. You could choose to specify certain DNS servers, or select to
get DNS automatically.
8
WL-520g Wireless Router User Manual
3 Also, if you want to protect transmitted data, select a middle or high Security Level.
Medium : only users with the same WEP key are to connect to this access point and
to transmit data using 64bits or 128bits WEP key encryption.
High: only users with the same WPA pre-shared key are to connect to this access
point and to transmit data using TKIP encryption.
Next we are to setup encrypted wireless connection for wireless router and wireless
5 client. If you have installed ASUS wireless adaptor as well as the utility, click Start
-> Programes -> ASUS Utility -> WLAN Card -> One Touch Wizard to open the
connection setup utility on the client end.
9
WL-520g Wireless Router User Manual
10
WL-520g Wireless Router User Manual
11
WL-520g Wireless Router User Manual
3 Click Finish.
12
WL-520g Wireless Router User Manual
4 Click Finish
Virtual DMZ allows you to expose one computer to Internet, so that all inbound
packets will be redirected to the computer you set. It is useful while runing some
applications which using uncertain incoming ports. Please use it carefully.
13
WL-520g Wireless Router User Manual
14
WL-520g Wireless Router User Manual
5) Setting up DDNS
Dynamic DNS (DDNS) allows user to export host name to Internet through DDNS
service provider. Each time the ASUS Wireless Router connect to Internet and get
an IP address from ISP, this function will update your IP address to DDNS service
provider automatically, so that any user on Internet can access the wireless network
or servers behind it through a predefined name registered in DDNS service provider.
15
WL-520g Wireless Router User Manual
13
Add Host.
15
16
WL-520g Wireless Router User Manual
15
Fill your DDNS account data
in the DDNS Setting page of
your router.
16 Click Finish.
6) Setting up WDS
Wireless bridge, also known as Wireless Distribution System or WDS, allows
connection to one or more access points. We now take an example to show how
to setup WDS for two APs. In this example, AP1, with MAC address of 00:0E:A6:
A1:3F:6E and IP address of 192.168.1.1, will operate in “Hybrid“ mode; AP2, with
MAC address of 00:0E:A6:A1:3F:87 and IP address of 192.168.1.2, will also be set
to “Hybrid“ mode, but it would not assign IP addresses to clients. Only one DHCP
server in the WDS system is allowed, that is AP1 in this example.
17
WL-520g Wireless Router User Manual
18
WL-520g Wireless Router User Manual
17 Repeat step 5-10. Then enter the MAC address of AP1, i.e., 000ea6a13f6e.
Repeat step 11-12. After reboot, WDS would work.
19
WL-520g Wireless Router User Manual
5. Trouble Shooting
1. Cannot access to web browser for router configuration
1. Open a web browser and open 2. Click on Delete Cookies and Delete
"Internet Options" dialog box. Files.
Authentication:
Can use a wire-connected computer to connect to router.
Check the wireless security setting,
Or can do a hard reset on the router.
20
WL-520g Wireless Router User Manual
4.1. When ADSL Modem "Link" light is on (not blinking), this means
Internet Access is Possible.
• Restart your computer.
• Reconfigurate the settings for ASUS Router and please refer to the Quick Setup
Guide of the WL-520g.
• Check whether the WAN LED on the router is on or not.
• Check wireless encryption settings
• Check whether the computer can get the IP address or not. (via both wired
network and wireless network)
• Check whether your Web browser is configurated to use the local LAN, and is
not configured to use a proxy server.
21
WL-520g Wireless Router User Manual
6. Additional Information:
Router and Client Wireless Connection Setup
22
WL-520g Wireless Router User Manual
2) EZSetup (Default)
Wireless LAN setup will complete in two easy steps.
1) If the setup button is pushed without running the EZsetup wizard utility,
the PWR indicator will flash and Internet connections will pause for a
short period but will then return to normal operation without change.
2) You must have ASUS wireless clients such as WL-100gE, WL-100g
Deluxe and WL-167g to use WL-520g EZSetup.
4
Choose the time zone where you are
located in.
23
WL-520g Wireless Router User Manual
5 6
7
Depending on the service level you applied for with your ISP, your IP may be random
(automatic) or fixed (enter manually).
24
WL-520g Wireless Router User Manual
3) EZSetup (Customized)
1
Only differences between the default
setup will be shown below. Select
the Customization check box for
advanced wireless LAN functions.
2
You can check for automatic or
uncheck for manual wireless network
naming.
You must enter a name if unchecked.
3
You can choose to use automatic or
manual security key.
If all your clients are using ASUS WPA
capable wireless network adapters,
you can select WPA for extra strength
security. (This selection will only be
available for ASUS WPA adapters.)
4
If you chose “Manually assign”, enter
a WEP (Wired Equivalent Privacy) key
following the guideline as shown.
25
WL-520g Wireless Router User Manual
5
If you chose “Manually assign” and
selected the WPA check box , enter
a WPA (Wi-Fi Protected Access) key
following the guideline as shown.
6
Security-enabled wireless LAN
environment is built now.You can print
your key and your other network settings
for your reference.
Wireless LAN setup is complete. Click
Next to make Internet connection
settings.
*For the following steps of Internet settings,
please refer to P14~P15 Step 4~8.
26
WL-520g Wireless Router User Manual
7. Appendix
FCC Warning Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the userʼs authority to operate the equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter
Safety Information
To maintain compliance with FCCʼs RF exposure guidelines, this equipment
should be installed and operated with minimum distance 20cm between the
radiator and your body. Use on the supplied antenna.
27
WL-520g Wireless Router User Manual
CE Mark Warning
This is a Class B product, in a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.
28
WL-520g Wireless Router User Manual
29
WL-520g Wireless Router User Manual
30