Professional Documents
Culture Documents
Cal. 7T62A/7T92A/7T94A
[SPECIFICATIONS]
Cal. No.
7T62A 7T92A 7T94A
Item
Movement
Height 3.3 mm
Voltage 1.55 V
Battery life Approx. 3 years Approx. 3 years Approx. 5 years
Jewels Nil
REMARKS ON REPAIRING CAL. 7T62A/7T92A/7T94A
Unlike the other Cal. 7T Series watches, which have two crowns and three buttons, Cal. 7T62A, Cal. 7T92A and
Cal. 7T94A have one crown and two buttons. But their basic movement structure is similar in other respects,
and the knowledge and technique you have gained in handling the previous Cal. 7T Series watches will come
in handy when you repair Cal. 7T62A, 7T92A as well as 7T94A.
When repairing, however, you are requested to have the full knowledge of the features characteristic of these
watches and strictly observe the repairing and checking instructions provided in this guide so that the watches
will be repaired correctly.
FEATURES
As Cal. 7T62A/7T92A/7T94A has fewer crowns and buttons, the operating procedures for alarm setting (for Cal.
7T62A only), time setting and stopwatch hand position adjustment differ from those of the other Cal. 7T Series
watches.
As a result of this structure change, the battery life of Cal. 7T62A/7T92A/7T94A has increased as compared with
that of the other Cal. 7T series watches.
● Button operation
Standard Measurement A Start A Stop B Reset
CROWN Pull out to the B Press to set the CROWN Push back in to the
A 1st click. alarm time. normal position.
2/27
Cal. 7T62A/7T92A/7T94A
PARTS CATALOGUE
Disassembling procedures Figs. : 1 55
2 0808 580
Date dial guard
3 (0878 527) ★
Date dial page 10
★The type of the part
is determined based
on the case design.
4 0962 580
Remarks on removing the winding stem Intermediate wheel
for calendar correction
To remove the winding stem when taking
out the movement from the case or while 5 0737 580
disassembling the parts during repair Date corrector setting wheel
work, be sure to pull out the crown to the
first click, and then, remove the winding 6 0802 580
Date driving wheel
stem while pushing the setting lever.
7 0271 583
Hour wheel for alarm
3/27
Cal. 7T62A/7T92A/7T94A
PARTS CATALOGUE
The illustration refers only to 9 0022 230
Battery clamp screw
Cal. 7T62A.
0022 230
• Battery clamp screw (2 pcs.) 10 4225 511 page 14
Battery clamp
11 SR927W page 1
0022 459
Battery
• Circuit block cover screw (4 pcs.)
12 0022 459
Circuit block cover screw
(4589 801)
Piezoelectric element
13 4457 814 page 15
Circuit block cover
16 4246 700
Buzzer lead terminal
17 4270 710
Battery connection (–)
4/27
Cal. 7T62A/7T92A/7T94A
PARTS CATALOGUE
The illustration refers only to Cal. 7T62A.
33 4002 711
Coil block for alarm
34 4002 700
Coil block (A)
35 4002 700
Coil block for
chronograph second
36 4002 711
Coil block
for chronograph minute
50 4239 710
51 4239 711 Rotor stator
Rotor stator
for chronograph second
52 4239 712
Rotor stator for alarm
53 4239 713
Rotor stator for chronograph
54 4450 701
Switch lever (B)
5/27
Cal. 7T62A/7T92A/7T94A
PARTS CATALOGUE
The illustration refers only to 9 0022 230
Battery clamp screw
Cal. 7T92A.
0022 230
• Battery clamp screw (2 pcs.) 10 4225 512 page 14
Battery clamp
12 0022 459
Circuit block cover screw
17 4270 710
Battery connection (–)
6/27