CONG TY THU NGHIEM VA KIEM BINH QUOC TE
INTERNATIONAL rb
'STING AND INSPECTION SERVICE
cn IZ, Rach Dua Ward, Vn
x: (84)254,3 833 679 - Hot
2
Tau City
COMPANY
316 6868
Certificate No
‘Vung Tau Provinee, Vietnam
Address: Nguyen Huu Canh, Thang Nhat Ward, Vung Tau City, Ba Ria =
Inspection procedure
References peeten Bt
QTOI-ITIS / Lifting equipments inspection/testing procedure
Codes/standards
BS EN 13414 - 1; ASTM — E165; According to elient’s request
L A
Date of inspection test: 19/07/2022
Place: ITIS Workshop
Reason for issuing the certificate:
Oi
I certificate O Re-certificate
ClAfter repair other
cand report as follows
This is to certify that the undersigned In
spector and Surveyor did attend the inspection of the equipment mentioned
Working |
é, - dec Number imit ‘Test Load
Equipment Serial No. Description opened al a i | applied hes)
__KIMEA 347 |~Type: single wire rope sling.
-Dia and length of rope: 090
WIRE ROPE mm x 16 m, | "
SLING Construction: 7x(6x36HWRE)| | 85000 Ns
+. Galvanized, EEIPS, bolt end
la! _KIMEA 351__| soft eye. MBL 368,2MT a a
Inspection/Examination/Testing checklist
The equipment has been inspected as follow a
‘Type of Inspection Result
Ite, Description. Visual MPV DPI Before After Conclusion Remark
A load test | load test j
1 | Marking /ID s NA NA WA "|
2 | Leg rope and rope eyes Ss NA NA NWA |
3 | Dim of matched legs as: WA NA N/A
4 | Ferrule / Thimble eye Ss NA NWA | NA_ s
5 | Others: G S_ |_NA WA | NA Ss
Conelusion: At the time of inspection, The equipment with standard and safety for use 5
Recommended for next examination/test :
Visual: 01/2023
and thea the above particulars are cor?
We certify that the above particulars are correct, and that the examination and test was carried out by the competem |
person: found to be free from cracks, flaws or other defect
Inspector/Examiner
hs
oe
Cav Vin Lam
necessary is supervised in its proper use
Lay
The above equipment has been tested and examined and is for normal use by a person who has been instructed. waned and where
Remark: $= Satisfaction ~ N= Not Applicable ~_ RR = Repairs required ~ R= Reject