Professional Documents
Culture Documents
PART 1 GENERAL
1.3 SUBMITTALS
B. Product Data:
1. Manufacturer's data sheets on each product to be used.
2. Preparation instructions and recommendations.
3. Storage and handling requirements and recommendations.
4. Typical installation methods.
C. Verification Samples: Two representative units of each type, size, pattern, and color.
D. Shop Drawings: Include details of materials, construction, and finish. Include relationship
with adjacent construction.
26 55 61 -1
C. Source Limitations: Provide each type of product from a single manufacturing source to
ensure uniformity.
A. Store and handle in strict compliance with manufacturer's written instructions and
recommendations.
B. Protect from damage due to weather, excessive temperature, and construction operations.
1.8 WARRANTY
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Electronic Theatre Controls (ETC), which is located at: 3031
Pleasant View Rd. P. O. Box 620979; Middleton, WI 53562-0979; Tel: 608-831-4116; Fax:
608-836-1736; Email:request info (mail@etcconnect.com); Web:http://www.etcconnect.com
26 55 61 -2
d. L70 rating: Greater than 54,000 hours.
5. Color:
a. Color temperature Range: Color mixing.
b. Calibrated Array: Yes.
c. Red Shift: No.
6. Optical:
a. Beam Angle Range: 13-44 degrees
1) Motorized zoom
b. Gate Size: N/A.
c. Aperture Size: 7"
d. Pattern Projection: No.
e. Pattern Size: N/A.
f. Camera Flicker Control/Hz Range: Default: 5kHz. RDM: 25,000 Hz.
7. Control:
a. Input Method: DMX-512 via 5-pin XLR connector. Protocols: DMX512, RDM,
City Theatrical Multiverse, NFC.
b. RDM Configuration: Yes.
c. NFC Configuration: Yes
d. User Interface Type: 7-segment 3 button, single encoder interface.
1) Encoder controls local motorized zoom
e. Local Control: Yes.
f. Onboard Presets: Yes, 12. Onboard Sequences: Yes, 5. Onboard Effects: No.
g. Fixture-to-Fixture Control: Yes.
h. 15-bit virtual dimming engine.
8. Electrical:
a. Voltage: 100 to 240 VAC, 50 to 60 Hz. Input Method: PowerCON True1 in and
thru.
b. Inrush First Half-Cycle:
c. Fixtures per Circuit:
1) 8 (20 A power thru connector).
2) 9 (R20 module or similar).
3) Wattage: 148.4 W at 120 V. 147 W at 240 V.
4) Current Draw: 1.28 A at 120 V. 0.70 A at 240 V.
9. Thermal: Operating Temperature: 32 to 104 degrees F.
a. Fan: Yes. Not controllable.
b. Droop Compensation: Yes.
10. Physical: IP Rating: IP-20.
a. Materials: Die-cast aluminum. Colors: Black, white, silver, or custom.
b. Mounting Options: Yoke or floor stand.
c. Included Accessories: Power cable and hanging yoke.
d. Seven-segment, three-button Interface.
PART 3 EXECUTION
3.1 EXAMINATION
A. Do not begin installation until substrates have been properly constructed and prepared.
3.2 PREPARATION
B. Prepare surfaces using the methods recommended by the manufacturer for achieving the
best result for the substrate under the project conditions.
26 55 61 -3
3.3 INSTALLATION
END OF SECTION
26 55 61 -4