Professional Documents
Culture Documents
A. General
3. The fixture shall be CE compliant and UL 1573 listed for stage and studio use
5. The fixture shall be provided with the minimum warranty of 5 years full fixture
coverage and 10 years LED array coverage
1. The unit shall be constructed of rugged, die cast aluminium, free of burrs and
pits.
C. Optical
4. 19, 26, 36, and 50 degree units shall have optional lens tubes available for
precision, high-contrast imaging.
1. The fixture shall be CE compliant and ETL and cETL LISTED, and shall be so
labelled when delivered to the job site.
2. The fixture shall be ETL LISTED to the UL1573 standard for stage and studio
use
E. Thermal
1. Fixture shall be equipped with a cooling fan.
F. Electrical
1. The fixture shall be equipped with a 100V to 240V 50/60Hz internal power
supply
G. LED Emitters
1. The fixture shall contain a minimum of four different LED colours to provide
colour characteristics or two colour temperature white LEDs for the Pearl
products, as described in the Colour Section below
2. All LEDs used in the fixture shall be high brightness and proven quality from
established and reputable LED manufacturers.
a. Fixture shall utilize Luxeon® Rebel LED emitters
H. Calibration
I. Colour
J. Dimming
1. The LED system shall use 15-bit nonlinear scaling techniques for high-
resolution dimming.
3. Dimming curve shall be optimised for smooth dimming over longer timed
fades.
4. The LED system shall be digitally driven using high-speed pulse width
modulation (PWM)
2. The fixture shall be compatible with the ANSI RDM E1.20 standard
a. All fixture functions shall accessible via RDM protocol for modification
from suitably equipped control console
b. Temperature sensors within the luminaire shall be viewable in real time
via RDM
c. Fixtures not offering RDM compatibility, feature set access or
temperature monitoring via RDM shall not be compatible
6. The fixture shall offer stand-alone functionality eliminating the need for a
console
a. Fixture shall ship with 12 preset colours or colour temperatures
accessible as a stand-alone feature
b. Fixture shall ship with 5 sequences accessible as a stand-alone feature
c. Each colour and sequence can be modified by the end user via RDM
d. Fixtures can be linked together with standard DMX cables and
controlled from designated master fixture
1) Up to 32 fixtures may be linked
e. Fixtures in a stand-alone state shall restore to the settings present prior
to power cycling, eliminating the need for reprogramming
f. Fixtures without stand-alone operation features described above shall
not be acceptable.