Professional Documents
Culture Documents
Nipple Plug Spreadsheets
Nipple Plug Spreadsheets
Landing nipple X XN R RN
Lock X XN R RN
Running tool X Line running tool R Line running tool
Pulling tool Otis GR pulling tool Otis GR pulling tool
Prong - 2 runs to set and pull Prong - 2 runs to set and pull
Melon - 1 run to set, 2 runs to pull Melon - 1 run to set, 2 runs to pull
Melon equ. Ass holes near top Melon equ. Ass holes near top
Prong equ. Ass holes in middle Prong equ. Ass holes in middle
Schlumberger Public
Top No Go Bottom No Go
Colin Ritchie Oct 2005
The Baker F top no go nipple has the no go shoulder above the seal The Baker R bottom no go nipple has the no go
bore, there are a number of different locks that can be installed in shoulder below the seal bore. They have either
this nipple. They have either internal (IFN) or external (EFN) fishing internal (IFN) or external (EFN) fishing necks and
necks and one lock is fully selective. there is not a selective lock that fits in this nipple
Landing nipple F R
Locks M, M1, G, F, F1, W, S Z, R, E, K
Locks M, M1, F, F1 (IFN) G, W (EFN) S - selective (EFN) E, K (IFN) R (EFN) Z (EFN)
Running tool GS C-1 C-1 GS C-1 C-1
E selective Baker Soft set
G selective
Pulling tool GS SB SB GS SB SB
Type G equalising assembly - Prong run with plug - one run to set, two runs to pull There are different attachments used
Type H equalising assembly - Prong run after plug body is set - 2 runs set and 2 runs to pull to run and pull Baker standard
devices. They are defined as Shanks
Type R equalising assembly - Melon for clean well conditions - 1 run to set and 1 run to pull to set, Probes to pull and Prongs to
equalise. See below
Type B bottom adapter - Gauge carrier attachment used to hang gauges from the lock
Type D bottom adapter - Wireline retrievable choke used to restrict flow
Plugs
Colin Ritchie Oct 2005
Not all combinations of lock and equalising assembly are possible, due to internal or external fishing neck on
the lock or the equalising assembly type, below are the most common.
Standing valves
There are two standing valves used with Standard Baker equipment. They are called FB and RB, top no go
and bottom no go respectively. They can be run on a C-1 running tool but the most common practice is to
use an Otis SB. It is possible to stay attached when doing pressure test depending on the operation.
80
Schlumberger Public
Schlumberger Public
Surset top No Go Surset bottom No Go
Colin Ritchie Oct 2005
To improve from the standard Baker lock and nipple system the Baker Surset system gives a pressure rating indication in the title of both the
nipple and lock used. The first letters A, H and V indicte the pressure ratings of < 10K, 10k to 15K and >15 K respectively. The second letters F and
R indicate top or bottom nogo respectively.
Landing nipple AF HF VF AR HR VR
Locks AF HF VF AR HR VR
Running tool Model A Model A Model A Model A Model A Model A
Attachment D Probe D Probe D Probe D Probe D Probe D Probe
Pulling tool GS GS GS GS GS GS
Equalising Assemblies Plug nomenclature
Colin Ritchie Oct 2005
Type H equalising assembly - Prong run after plug body is set - 2 runs set and 2 runs to pull AFH - <10K, top No Go, Prong
Type M equalising assembly - Melon for clean well conditions - 1 run to set and 1 run to pull HFH - 10K - 15K, top No Go, Prong
VFH - >15K, top No Go, Prong
Standing Valves ARH - <10K, bottom No Go, Prong
Baker Surset uses the letter 'T' to denote that the device is a standing valve. There nonenclature is as HRH - 10K - 15K, Bottom No Go, Prong
follows - AFT, HFT, VFT, ART, HRT and VRT. The first two letters in the title indicate the nipple the device
VRH - >15K, bottom No Go, Prong
will set into and its pressure rating.
Schlumberger Public
Camco DB Series Only used on 4" tubing and above DB-6 & DB-HP DB-6-E
Colin Ritchie Oct 2005
Schlumberger Public
"DB" SERIES TOP NO-GO LOCK O.D Vs LANDING NIPPLE POLISHED BORE S
HIGH PRESSURE LOCKS FOR LARGE SIZE TUBING
WCP, COMPLETIONS SYSTEMS - TOP NO-GO LOCKS & LANDING NIPPLE PROFILES USED IN 4"
Available Locks / 5,000 psi or Higher WP (Other locks with lower pressure capability from above are als
Landing Pressure Pressure
Nipple Next Upper Rating Rating
Polished Lock Part Lock No-Go L/N Polished From From
Bore/I.D Lock Type Number O.D Bore Size Above Below
DB-6-E 10391-000 3.360" 5,000 psi 5,000 psi
3.312" N/A
DB-6-HP 10318-000 3.412" 10,000 psi 10,000 psi
DB-6-E 10392-000 3.296" 5,000 psi 5,000 psi
3.250" DB-6-HP 10312-000 3.320" 3.312" 10,000 psi 10,000 psi
DB-6-E 10393-000 3.234" 5,000 psi 5,000 psi
3.187" 3.250"
DB-6-HP 10317-000 3.287" 10,000 psi 10,000 psi
DB-6N-HP 10836-000 3.120" 5,000 psi 10,000 psi
3.125" DB-6-E 10394-000 3.172" 3.187" 5,000 psi 5,000 psi
DB-6-HP 10314-000 3.190" 10,000 psi 10,000 psi
WCP, COMPLETIONS SYSTEMS - TOP NO-GO LOCKS & LANDING NIPPLE PROFILES USED IN 4-1/2
Available Locks / 5,000 psi or Higher WP (Other locks with lower pressure capability from above are als
Landing Pressure Pressure
Nipple Next Upper Rating Rating
Polished Lock Part Lock No-Go L/N Polished From From
Bore/I.D Lock Type Number O.D Bore Size Above Below
DB-6-E 10501-000 3.910" 5,000 psi 5,000 psi
3.875" N/A
DB-6-HP 19619-000 3.958" 7,500 psi 5,000 psi
DB-6-E 10366-000 3.843" 5,000 psi 5,000 psi
WCP, COMPLETIONS SYSTEMS - TOP NO-GO LOCKS & LANDING NIPPLE PROFILES USED IN 5"
Available Locks / 5,000 psi or Higher WP (Other locks with lower pressure capability from above are als
Landing Pressure Pressure
Nipple Next Upper Rating Rating
Polished Lock Part Lock No-Go L/N Polished From From
Bore/I.D Lock Type Number O.D Bore Size Above Below
DB-6-E 10375-000 4.172" 5,000 psi 5,000 psi
4.125" N/A
DB-6-HP 10337-000 4.255" 6,000 psi 10,000 psi
DB-6-E 10374-000 4.110" 4.125" 5,000 psi 5,000 psi
4.063"
DB-6-HP 5,000 psi or Higher Pressure From Above & Below
DB-6-E 10373-000 4.046" 4.063" 5,000 psi 5,000 psi
4.000"
DB-6-HP 5,000 psi or Higher Pressure From Above & Below
DB-6-5A 10832-000 3.980" 5,000 psi 5,000 psi
DB-6-E 10500-000 3.975" 5,000 psi 5,000 psi
3.937" 4.000"
DB-6-HP 10338-000 4.067" 10,000 psi 10,000 psi
DB-6-E 10501-000 3.910" 5,000 psi 5,000 psi
3.875" 3.937"
DB-6-HP 19619-000 3.958" 7,500 psi 5,000 psi
DB-6-E 10366-000 3.843" 5,000 psi 5,000 psi
3.562" 3.625"
DB-6-HP 10823-000 3.615" 4,700 psi 10,600 psi
3.562" DB-6-HP 10823-000 3.615" 3.625" 7,100 psi 15,900 psi
DB-6-HP 10334-000 3.662" 10,000 psi 10,000 psi
DB-6-HP 10831-000 3.662" 10,000 psi 10,000 psi
DB-6-E 10398-000 3.547" 3.562" 5,000 psi 5,000 psi
3.500"
DB-6-HP 5,000 psi or Higher Pressure From Above & Below
DB-6-E 10399-000 3.484" 5,000 psi 5,000 psi
3.437" 3.500"
DB-6-HP 10324-000 3.550" 10,000 psi 10,000 psi
DB-6-E 10391-000 3.360" 5,000 psi 5,000 psi
3.312" 3.437"
DB-6-HP 10318-000 3.412" 10,000 psi 10,000 psi
WCP, COMPLETIONS SYSTEMS - TOP NO-GO LOCKS & LANDING NIPPLE PROFILES USED IN 5-1/2
Available Locks / 5,000 psi or Higher WP (Other locks with lower pressure capability from above are als
Landing Pressure Pressure
Nipple Next Upper Rating Rating
Polished Lock Part Lock No-Go L/N Polished From From
Bore/I.D Lock Type Number O.D Bore Size Above Below
DB-6 10591-000 4.705" 5,000 psi 5,000 psi
4.750"
4.625" DB-6-MP QD075 4.677" 3,645 psi 7,500 psi
DB-6-HP 5,000 psi or Higher Pressure From Above & Below
DB-6-M 10516-000 4.610" 3,164 psi 5,000 psi
DB-6-E 10502-000 4.610" 5,000 psi 5,000 psi
DB-7E 10673-000 4.610" 3,164 psi 5,000 psi
4.562" DB-7E 10848-000 4.610" 4.625" 3,164 psi 5,000 psi
DB-7E-MP 10636-000 4.610" 7,500 psi 7,500 psi
DB-6-HP 10592-000 4.670" 7,500 psi 7,500 psi
DB-6-E 10378-000 4.545" 5,000 psi 5,000 psi
DB-7E-MP 10635-000 4.545" 7,500 psi 7,500 psi
4.500" DB-6-M 10833-000 4.600" 4.562" 7,500 psi 7,500 psi
WCP, COMPLETIONS SYSTEMS - TOP NO-GO LOCKS & LANDING NIPPLE PROFILES USED IN 6-5/8
Available Locks / 5,000 psi or Higher WP (Other locks with lower pressure capability from above are als
Landing Pressure Pressure
Nipple Next Upper Rating Rating
Polished Lock Part Lock No-Go L/N Polished From From
Bore/I.D Lock Type Number O.D Bore Size Above Below
DB-6-M 10575-000 5.865" 6,000 psi 6,000 psi
DB-6-M 10816-000 5.834" N/A 5,000 psi 6,000 psi
5.750"
DB-6E-M 10601-000 5.795" 5,000 psi 5,000 psi
DB-6-HP 5,000 psi or Higher Pressure From Above & Below
DB-6-M 10827-000 5.472" 5.687" 5,000 psi 5,000 psi
5.375"
DB-6-HP 5,000 psi or Higher Pressure From Above & Below
WCP, COMPLETIONS SYSTEMS - TOP NO-GO LOCKS & LANDING NIPPLE PROFILES USED IN 7"
Available Locks / 5,000 psi or Higher WP (Other locks with lower pressure capability from above are als
Landing Pressure Pressure
Nipple Next Upper Rating Rating
Polished Lock Part Lock No-Go L/N Polished From From
Bore/I.D Lock Type Number O.D Bore Size Above Below
DB-6-M 10845-000 6.090" 5,000 psi 6,000 psi
6.000" N/A
DB-6-M 10598-000 6.090" 5,000 psi 5,000 psi
DB-6-M 10466-000 5.982" 2,300 psi 5,000 psi
5.937 6.000"
DB-6-M 10497-000 5.982" 2,300 psi 7,500 psi
DB-6-M 10576-000 5.986" 6,000 psi 5,000 psi
5.875" 5.937"
DB-6E-M 10596-000 5.920" 5,000 psi 5,000 psi
DB-6-M 10844-000 5.919" 6,000 psi 5,000 psi
5.812" 5.875"
DB-6-M 10597-000 5.858" 5,000 psi 5,000 psi
DB-6-M 10575-000 5.865" 6,000 psi 6,000 psi
DB-6-M 10816-000 5.834" 5.812" 5,000 psi 6,000 psi
5.750" DB-6E-M 10601-000 5.795" 5,000 psi 5,000 psi
DB-6-HP 5,000 psi or Higher Pressure From Above & Below
DING NIPPLE POLISHED BORE SIZE
LARGE SIZE TUBING
Notes / Cautions
Notes / Cautions
Notes / Cautions
Present Lock
Proposed Lockwill not
will gogo
not through the
through 3.687"
the upper
3.687" profile
upper
profile
Working pressures apply when 80 MYS landing nipple
Working pressures apply when 120 MYS landing nipple
Present Lock will not go through the 3.625" upper profile
Present Lock will not go through the 3.625" upper profile
Notes / Cautions
Notes / Cautions
Landing nipple D DS
Locks C CC CS CSC
Running tool D or DT type D or DT type D or DT type D or DT type
Pulling tool PRS-2 or JDC PRS-2 or JDC PRS-2 or JDC PRS-2 or JDC
Equalising assemblies Note: of the four locks available, C and CS feature a ratchet locking
system, CC and CSC have a collet system to keep the lock close. CS and
A-Series Blanking plug CSC locks have a slightly larger OD than the C and CC locks, but all
utilise the same design. Fishing necks can be either internal or external
hence there are two options for pulling tools.
Plugs available
CA 1 run set 2 runs pull C series locks range
from 1.437" through to
CCA 1 run set 2 runs pull 2.875"
Schlumberger Public
Pressure Retention Capability
Camco ‘C’ Series Locks
Lock type Lock serial Packing Working Press.
number Pressure from
Above
O.D.
C 10200 1.437 10,395 5000
CC 10214 “ “ “
C 10206 1.562 9,556 5000
CC 10201 “ “ “
C 10204 1.812 9,352 5000
CC 10226 “ “ “
CS 10230 1.875 8,354 5000
CSC 10225 “ “ “
C 10208 2.25 6,436 5000
CC 10227 “ “ “
CS 10232 2.312 3,990 3500
CSC 10223 “ “ “
C 10210 2.75 5,113 5000
CC 10212 “ “ “
C 10236 2.812 4,856 4500
CSC 10229 “ “ “
CS 10234 2.875 2,927 2500
Schlumberger Public