Professional Documents
Culture Documents
Set Address Pages From VRV III System - Heatpump-R410A
Set Address Pages From VRV III System - Heatpump-R410A
16
Control 819
Control Functions ED34-645A
Notes:
1. Setting is carried out in the group mode. however, if the mode number inside the parentheses is selected, indoor
units can also be set individually.
2. The SECOND CODE number is set to “ ” when shipped from the factory.
3. Not displayed if the indoor unit is not equipped with that function.
4. When returning to the normal mode. “88” may be displayed in the LCD in order for the remote controller to initialize
itself.
5. ∗ : Setting the static pressure selection for FXD (Q)
SECOND CODE NO.
01 (Factory Setting) 02 (High Static Pressure Setting)
FXD 20 Pa 49 Pa
FXDQ 15 Pa 44 Pa
Note:
For simplified remote controller, see the following.
For setting group No. of HRV and wiring adaptor for other air conditioners, etc., refer to the instruction manual
attached.
NOTICE
Enter the group No. and installation place of the indoor unit into the attached installation table. Be sure to keep the
installation table with the operation manual for maintenance.
820 Control