Professional Documents
Culture Documents
1-3/8" Slat
Backer
Backer
Clip
plus capabilities
to do more
armstrongceilings.com/capabilities
See more photos at:
WoodWorks® Custom Installation – Grille Faceted Ceiling 2-1/4" panels in Grille Light Cherry with Backer armstrongceilings.com/photogallery
These warm, natural wood ceilings offer installation flexibility and a variety of design options.
KEY SELECTION ATTRIBUTES
new • Integrate linear lights seamlessly with • Install in the ceiling, on the wall, or
the Integrated Light Connection Clip create 90º angled or faceted
and lights from Backlight® srl and XAL® ceiling-to-wall transitions
• 13 pre-designed panels with new • Easy installation with dowel or backer,
hting
slat heights and widths or backer & dowel combination
• Custom slat sizes and finishes available • FSC and Rainforest Alliance Certified
Now, Ligion
®
Integraat sy
for every project wood options available
• Now, available in painted White finish
FINISH SELECTION
Due to printing limitations, shade may vary from actual product.
Grille White Grille Maple Grille Light Grille Dark Grille Walnut Custom Finishes
(GWH) (GMP) Cherry (GLC) Cherry (GDC) (GWN) Available
NOTE: Panel backers are black. Custom backer colors available. WoodWorks® Grille panels in Maple with 5-1/4" x 95"
linear light fixture. See page 243A for lighting
integration details.
LEED ®
WOODWORKS ® Grille
producer resp.
raw materials
low emitting/
management
construction
waste mgmt
sourcing of
recyclable/
(for wood)
ingredient
design for
acoustics
materials
materials
materials
flexibility
reporting
extended
biobased
Solid Wood Backer, Dowel, and Backer & Dowel Combination
recycled
material
regional
lighting
content
quality
energy
FSC
EPD
▲ ▲
LOCATION DEPENDENT WITH
INFILL
VISUAL SELECTION ACOUSTICAL INFORMATION PANEL
Acoustics
Item Number
No. ◆ Width Height Per Panel (Nominal) Nominal W x L x H * Area
Infill Panel
Total
Custom Slat Sizes Available Custom Panel Sizes Available
ACCESSORIES
Dimensions Dimensions
Item Description Nominal W x L Color Pcs/ Item Description Nominal W x L Color Pcs/
No. ◆ (Inches) Ctn Number ◆ (Inches) Ctn
Custom Sizes
Available .188
5672 _ _ _ Junction – 1-3/8" 1-1/2 x 96 x 2" All finishes Bulk 5688 Dowel Clip 3/8 x 7/8 x 7/8" N/A 250
.191
n .100
.200
1.015
.125
pcs/pail
5674 _ _ _ End Cap – 1-3/8" 3/4 x 96 x 2" All finishes Bulk 5671 _ _ _ Ledger 1 x 96 x 1/4" All finishes Bulk
WOODWORKS ®
.445
.020 e5
.883
5675 _ _ _ End Cap – 2-1/4" 3/4 x 96 x 2-3/4" All finishes Bulk 7891 12-Gauge Soft 144" Length N/A 140
115°
55° .087
.883 e4
e1 1.066
11° 2 .188
e
Hanger Wire
FLAT PATTERN
SCALE 1 : 1
R.275 e3
7170 _ _ _
.375
7172 _ _ _ End Cap – 5-1/4" 3/4 x 96 x 5-3/4" All finishes Bulk 7239 Adjustable Trim Clip – N/A 50
.191
n .100
◆ When specifying or ordering, include the 3-letter color suffix that coordinates with your
5687 .210
Backer Clip 3/8 x 11/16 x 7/8" N/A 250 WoodWorks ceiling: (e.g., 5671 G M P).
.897
.125
pcs/pail NOTE: For integration with Axiom® trim (Black recommended for use with Solid Wood).
.935
.020
R.010
Flat Pattern
.888 .375
e1
STANDARD SIZES
3 Slats Per Panel 4 Slats Per Panel 5 Slats Per Panel 6 Slats Per Panel 8 Slats Per Panel
1-3/8" SLAT HEIGHT
Backer Only* = BO
WOODWORKS ®
Item 7099_ _ _ _ _◆
Dowel Only or
Backer & Dowel
◆ When specifying or ordering please include the installation type and color suffixes (e.g., 7092 B D G L C – 6 slats 3-1/4" Backer & Dowel in Grille Light Cherry).
* Backer Only panels are compatible with Integrated Light Connection Clip. See page 243A for lighting integration details
Dowel
Backer
Backer
Clip
Screws
WOODWORKS ®
PHYSICAL DATA
Material or possibly delay or accelerate the activation of the Site Conditions
Dowel, Slats, Backers, and Tegular panels – solid sprinkler or fire detection systems by channeling heat from It is very important that panels are climatized prior
Poplar (yellow or hybrid). a fire either toward or away from the device. Consult a fire to installation. Relative humidity between 25% and
Surface Finish protection engineer, NFPA 13, and local codes for guidance 55%, and temperatures between 50˚F and 86˚F, must
Clear or tinted semi-gloss coating on all finishes where automatic fire detection and suppression systems be maintained.
except Grille White (GWH). Grille White (GWH) are present. Installation Consideration
has a lacquer finish. Application Considerations When junction accessory is not used, the result will be a
Fire Performance Variation among panels may occur due to the natural 1" gap between slat lengths.
Solid Poplar (yellow or hybrid) Hardwood Slats characteristics of the wood and grain. Seismic Restraint
and Backers – Class C ASTM E84 surface burning Design Considerations WoodWorks ® Grille panels have been engineered, tested, and
characteristics. Flame Spread Index 200 or less. Custom slat and panel sizes available. approved for application in all seismic areas when installed
Smoke Developed Index 450 or less. Backer & Dowel per Armstrong Ceilings installation instructions.
Fire performance will vary between wood species. For slat heights over 5", both Dowels and Backers are Warranty
Flame stop Class A coating available. required for stability. Backer height is 1/2". Panel backers Details at armstrongceilings.com
Class A intumescent treatment is available for all are black. Custom backer colors available. Weight
finishes except Grille White (GWH). Contact TechLine Infill Panel Use 7263 – 0.8 lbs/SF 7091 – 1.6 lbs/SF
at 1 877 276-7876 for details. If no infill panel is used, unfinished parts of the suspension 7264 – 1.1 lbs/SF 7092 – 1.9 lbs/SF
These panels, as with other architectural features system and Axiom ® trim will be visible from below. 7094 – 1.4 lbs/SF 7098 – 2.5 lbs/SF
located at the ceiling, may obstruct or skew the 7265 – 1.3 lbs/SF 7096 – 2.7 lbs/SF
planned fire sprinkler water distribution pattern, 7266 – 1.8 lbs/SF 7093 – 2.1 lbs/SF
7097 – 1.9 lbs/SF 7099 – 3.1 lbs/SF
7095 – 2.1 lbs/SF
243
LIGHTING SOLUTIONS
WOODWORKS ® Grille
Seamlessly integrate linear light fixtures from Backlight® srl and XAL®
with standard or made-to-order WoodWorks® Grille Backer Only panels
using Integrated Light Connection Clips that suspend lights directly from the
suspension system. This eliminates the need for independent support of the
fixture or modification of the suspension system.
VISUAL SELECTION
Clip Item No. Description Coordinating Panel Field Modification Compatible Partner Clips Required
WoodWorks ® Panel Required* Light Fixture Dimensions per Light Fixture
Item No. W x L (Inches)
INSTALLATION DETAILS
WOODWORKS ®
BP8171WGBOC01
243A
armstrongceilings.com//linearlighting of FSC Forest Stewardship Council®, A.C., license code FSC-C007626; all other
trademarks used herein are the property of AWI Licensing LLC and/or its affiliates
BPCS-5106-120 © 2020 AWI Licensing LLC Printed in the United States of America