Professional Documents
Culture Documents
Amplifi Er and Data Converter Guide: TI Worldwide Technical Support
Amplifi Er and Data Converter Guide: TI Worldwide Technical Support
Amplifier and
ments generally can be identified by phrases such as TI or its manage-
Home Page Fax ment “believes,” “expects,” “anticipates,” “foresees,” “forecasts,” “esti-
support.ti.com International +81-3-3344-5317 mates” or other words or phrases of similar import. Similarly, such state-
ments herein that describe the company’s products, business strategy,
TI Semiconductor KnowledgeBase Home Page Domestic 0120-81-0036 outlook, objectives, plans, intentions or goals also are forward-looking
support.ti.com/sc/knowledgebase Internet statements. All such forward-looking statements are subject to certain
risks and uncertainties that could cause actual results to differ materially
International support.ti.com/sc/pic/japan.htm
Mexico Phone 0800-670-7544 Phone Important Notice: The products and services of Texas Instruments
International +91-80-41381665 Incorporated and its subsidiaries described herein are sold subject to
Fax +1(972)927-6377 Domestic Toll Free Number TI’s standard terms and conditions of sale. Customers are advised to
Internet support.ti.com/sc/pic/americas.htm Australia 1-800-999-084
obtain the most current and complete information about TI products and
services before placing orders. TI assumes no liability for applications
China 800-820-8682 assistance, customer’s applications or product designs, software
Europe, Middle East, and Africa Hong Kong 800-96-5941 performance, or infringement of patents. The publication of information
Phone India 1-800-425-7888
regarding any other company’s products or services does not constitute
TI’s approval, warranty or endorsement thereof.
European Free Call 00800-ASK-TEXAS Indonesia 001-803-8861-1006
The platform bar, PowerPAD, Difet, Excalibur, e-trim, MicroAmplifier, DaVinci,
(00800 275 83927) Korea 080-551-2804 PurePath Digital, MicroStar Junior, TMS320, FilterPro, MDACBUFFERPro, Code
International +49 (0) 8161 80 2121 Malaysia 1-800-80-3973 Composer Studio, C28x, C54x, C55x, C62x, C64x, C67x, C6000, C5000,
Ref Ref
PRSRT STD
U.S. POSTAGE
Amp ADC Processor DAC Amp
14950 F.A.A. Blvd. PAID
Fort Worth, Texas 76155 DALLAS, TEXAS
PERMIT NO.
2758
Address service requested
10110101001011010101 1011010100101101010101100100101010101101001001010101011010101001010110101
Texas Instruments
www.ti.com/amplifier
SLYB115C www.ti.com/dataconverters 1Q 2009
2 Amplifier and Data Converter Selection Guide Amplifiers and Data Converters 139
Amplifiers
Inputs Outputs
POWER MANAGEMENT
Amplifiers for Driving
Analog-to-Digital ADCs
REF REF
Pages 93-94 Pages 93-94
Converters 57-58
pages 57 58
Isolation
Iso Amplifierss
olation Amp Temp Sensors
Quick Reference pages 55-56
pag Pages 95-97
Selection Tables
INTERFACE
Design and
Evaluation Tools
Amplifier and Data Converter Selection Guide Texas Instruments 1Q 2009 Texas Instruments 1Q 2009 Amplifier and Data Converter Selection Guide
Amplifier and Data Converter Selection Guide 3
Signal Chain
➔
Amplifiers
Outputs
POWER MANAGEMENT
REF Analog-to-Digital
Pages 93-94
Converters
DAC Amp
Pages 79-88
Pages 111-116
Digital-to-Analog
Operational
p Amps
pg. 66-14
14 Converters
High-Speed Amps
pg. 15-25
Clocks &
Timers Video Amps pg. 16-18
Analog
Precision Power Monitoring and
Pages 79-86
Control
Voltage
High Speed
PWM References
Driver
Pages 87-88
PWM V Valve,
Solenoid Drivers
& Speaker Temperature
Drivers pg. 50
Analog
Sensors
Monitoring Page 59-62
and Control Audio DACs
Pages 89-92 Pages 117-119
Quick Reference
Selection Tables
INTERFACE
Design and
Evaluation Tools
Comparators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-30
Analog
Monitoring and Difference Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32
Control
Analog Current Shunt Monitors . . . . . . . . . . . . . . . . . . . . . 33-34
Instrumentation Amplifiers
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Voltage Single Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37
References Dual Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Logarithmic Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Quick Reference Integrating Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Selection Tables
Isolation Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56
Design and
Evaluation Tools
Table of Contents
➔
Quick Reference
Selection Tables
Design and
Evaluation Tools
Technology Primer These amps include low offset voltage amplifiers by eliminating the substrate
Understanding the relative advantages and temperature drift, high open-loop junction diode present in junction
of basic semiconductor technologies gain and common-mode rejection. isolated processes. This technique yields
will help in selecting the proper device Precision bipolar op amps are used very high-precision, low-noise op amps.
for a specific application. extensively in applications where the Difet processes also minimize parasitic
source impedance is low, such as a capacitance and output transistor
CMOS Amps—when low voltage thermocouple amplifier, and where saturation effects, resulting in improved
and/or low power consumption, voltage errors, offset voltage and drift, bandwidth and wider output swing.
excellent speed/power ratio, rail- are crucial to accuracy.
to-rail performance, low cost and Op Amp Rapid Selector
small packaging are primary design Low IB FET Amps—when input
The tables on the following
considerations, choose microPackaged impedance is very high, FET-input amps
pages have been subdivided into
CMOS amps boasting the highest provide better overall precision than
several categories to help quickly
precision in the industry. bipolar-input amps because of very
narrow the alternatives.
low input bias current. Using a bipolar
High-Speed Bipolar Amps—when the amp in applications with high source
Precision Offset Voltage
highest speed at the lowest power is impedance (e.g., 500MΩ pH probe),
(VOS < 500µV) Pg. 8
required, bipolar technology delivers the offset, drift and noise produced by
the best performance. Extremely good bias currents flowing through the source Low Power
power gain gives very high output would render the circuit virtually useless. (IQ < 500µA) Pg. 9
power and full power bandwidths on the When low current errors are required,
lowest quiescent power. Higher voltage FET amps provide extremely low input Low Noise
requirements are also only satisfied in bias current, low offset current and high (VN ≤ 10nV/√Hz Pg. 10
bipolar technologies. input impedance.
Low Input Bias Current
Precision Bipolar Amps—excel in Dielectrically Isolated FET (Difet™) (IB ≤ 10pA) Pg. 11
limiting errors relating to offset voltage. Amps—Difet processing enables the
design of extremely low input leakage Wide Bandwidth, Precision
GBW > 5MHz Pg. 12
Operational Amplifier Naming Conventions
Channels Amp Class Amp Class Wide Voltage Range
Single = No Character TLV = Low Supply Voltage THS = High Speed
Dual = 2 TLC = 5V CMOS (±5 ≤ VS ≤ ±20V) Pg. 13
Triple = 3 TLE = Wide Supply Voltage
Quad = 4
THS x y 01 Single Supply
TLV 278 x
OPA y 3 63 Amplifier Type (VS (min) ≤ 2.7V) Pg. 14
30 = Current Feedback
Channels and Shutdowon Options
Base Model 31 = Current Feedback
0 = Single with Shutdown
100 = FET 1 = Single 40 = Voltage Feedback
41 = Fully Differential
High Speed
200 = Bipolar 2 = Dual
300 = CMOS (5.5V) 3 = Dual with Shutdown 42 = Voltage Feedback BW ≥ 50MHz Pg. 23
400 = High Voltage (>40V) 43 = Fast Voltage Feedback
4 = Quad
500 = High Power (>200mA) 45 = Fully Differential
5 = Quad with Shutdown
600 = High-Speed (>50MHz) 46 = Transimpedance
700 = CMOS (12V) 60 = Line Receiver
800 = High Speed (>50MHz) 61 = Line Driver
73 = Programmable Filters
Low Input Bias Current, Low Offset Current, Industrial, Test Equipment, Optical Networking
VS ≤ +3V FET, Difet™ OPA1xx, OPA627
High Input Impedance (ONET), High-End Audio
VS ≤ +44V Low Voltage Offset, Low Drift Industrial, Test Equipment, ONET, High-End Audio Bipolar OPA2xx, TLExxxx
±5V to ±15V XDSL, Video, Professional Imaging, Difet, High-Speed OPA6xx*, OPA8xx*
High Speed on Dual Supplies
Dual Supply Data Converter Signal Conditioning Bipolar, BiCOM THSxxxx*
2.7V ≤ VS ≤ 5V High Speed on Single Supply Consumer Imaging, Data Converter Signal High-Speed CMOS OPA35x, OPA6xx*,
Single Supply Conditioning, Safety-Critical Automotive THSxxxx*, OPA8xx*
*See High-Speed section, Page 15-25
100nV/div
• Battery-powered instruments
• Temperature measurement
• Medical instrumentation
• Handheld test equipment
Time (1s/div)
Key Features The OPA369 family of operational amplifiers combines TI’s rail-to-rail input/output
• Ultra-low supply current: 1µA (max) zero-crossover input topology with ultra-low power to offer excellent precision
• RRIO zero-crossover input topology for single-supply applications. Designed with battery powered instrumentation in
• Excellent CMRR: 100dB mind, the OPA369 features 0.75mV offset voltage, 12kHz bandwidth, and linear
• Low offset voltage: 0.75mV (max) input offset over the entire input range of the 1.8V to 5.5V supply range.
• Excellent GBW for low power: 12kHz VCC
• Packaging: SC70-3, SOT23-3, MSOP +
1/2
Applications OPA2369 C2
–
• Battery-powered instruments C1
C
• Portable devices R1 S
REF RF
R1
Key Features The OPA245 family of operational amplifiers offers exceptional DC precision in
• Low offset voltage: 175µV (max) microPackages and the rail-to-rail output stage helps to maximize the dynamic
• Low drift: 1.5µV/°C (max) range for low supply voltage applications.
• Rail-to-rail output swing These amplifiers feature a unique combination of extremely low offset voltage, low
• High CMRR, PSRR: AOL ≥ 120dB
drift, low input bias current, low noise, and low power consumption. Additionally,
• Low bias current: 5nA (max)
these amplifiers do not exhibit phase inversion, and the amplifiers are stable with
• Low input voltage noise: 7nV/√Hz at 1kHz
capacitances as high as 1nF.
• Wide supply range: ±2.25V to ±18V
• Low supply current: 750µV/amplifier (max) OPA2145
OPA145
• Packaging: SOT23-5, DNF-8 (3x3mm),
Out A 1 8 V+
MSOP-8, TSSOP-14, QFN-16 (4x4mm) Out 1 5 V+ A
−In A 2 7 Out B
Applications
V− 2 B
• Transducer amplifiers +In A 3 6 −In B
• Bridge amplifiers +In 3 4 −In
V− 4 5 +In B
• Temperature measurement
SOT23-5
• Strain gage amplifiers SO-8, Mini MSOP-8
• Precision integrators
• Battery powered instruments OPA245 package options, SOT23-5 and DFN-8. Expected release date 1Q 2009.
• Test equipment
Key Features The OPA1611 (single) and OPA1612 (dual) bipolar-input operational amplifiers achieve
• Ultra-low distortion: very low 1nV/√Hz noise density with a supply current of only 3.6mA. A high output
0.000015% at 1kHz drive capability of ±30mA provides the ability to drive 600Ω loads effectively. The
• Ultra-low noise: 1nV/√Hz at 1kHz OPA1611 and OPA1612 also offer rail-to-rail output swing to within 600mV with 600Ω
• High slew rate: 27V/µs load, which increases headroom, thereby maximizing dynamic range.
• Wide gain bandwidth product: Audio DAC
820Ω
80MHz (G = 100)
2200pF
45MHz (G = 1)
+VA 0.1µF
• High open loop gain: 130dB IOUT +
L
(+15V) 330Ω
100
• Packaging: SOIC-8 820Ω
8200pF
OPA1611 Lch Out
-VA
2200pF
Applications (-15V)
0.1µF
+VA 0.1µF
• Professional audio equipment (+15V)
680Ω 620Ω
IOUT –
• Broadcast equipment L OPA1611 330Ω 2700pF
• Crossover networks
High-performance audio DAC output filter. Expected release date 1Q 2009.
Wide Voltage Range Operational Amplifiers (±5V < VS < ±20V) Selection Guide
IQ Per Slew VOS VOS VN at
VS VS Ch. GBW Rate (25°C) Drift IB CMRR 1kHz Single Rail-
(V) (V) (mA) (MHz) (V/µs) (mV) (µV/°C) (pA) (dB) (nV/√Hz) Sup- to-
Device Description Ch. (min) (max) (max) (typ) (typ) (max) (typ) (max) (min) (typ) ply Rail Package(s) Price*
TLE214x Widest Supply, Low 1, 2, 4 4 44 4.5 6 42 0.5 1.7 1500000 85 10.5 Y N TSSOP, PDIP, SOIC $0.55
Noise, High Speed
TLE202x Low Power, FET-Input 1, 2, 4 4 40 0.35 2 0.65 0.2 2 70000 100 15 Y N SOIC, TSSOP, PDIP $0.45
TLE2027 Excalibur™, Low Noise, 1 8 38 5.3 13 2.8 0.1 0.4 90000 100 2.5 N N SOIC, PDIP $0.90
Bipolar
TLE2037 Excalibur, Low Noise, 1 8 38 5.3 50 7.5 0.1 0.4 90000 100 2.5 N N SOIC, PDIP $0.90
G≥5, Bipolar
OPAy241 µPower, Precision, Bipolar 1, 2, 4 2.7 36 0.03 0.035 0.01 0.25 0.4 20000 80 45 Y Out SOIC, PDIP $1.15
OPAy251 µPower, Precision, 1, 2, 4 2.7 36 0.038 0.035 0.01 0.25 0.5 20000 100 45 Y Out PDIP, SOIC $1.15
Bipolar
OPAy244 µPower, Low Cost, 1, 2, 4 2.2 36 0.06 0.43 0.1 1.5 4 25000 84 22 Y Out SOT-23, SOIC, $0.55
Bipolar PDIP
OPAy137 Low Cost, FET-Input 1, 2, 4 4.5 36 0.27 1 3.5 3 15 100 76 45 Y N SOT23, SOIC, $0.60
MSOP, PDIP
OPAy234 Low Power, Precision, 1, 2, 4 2.7 36 0.35 0.35 0.2 0.25 0.5 25000 91 25 Y Out MSOP, SOIC $1.05
Bipolar
OPAy237 Low Cost, Low Power, 1, 2 2.7 36 0.475 1.5 0.5 0.95 2.5 40000 80 28 Y N SOT23, MSOP, $0.55
Bipolar SOIC
OPAy130 Low Power, FET-Input 1, 2, 4 4.5 36 0.65 1 2 1 2 20 90 16 N N SOIC $1.40
OPAy277 High Precision, Low 1, 2, 4 4 36 0.825 1 0.8 0.02 0.1 1000 130 8 N N SON, SOIC, PDIP $0.85
Power, Bipolar
OPAy131 General Purpose, FET- 1, 2, 4 9 36 1.75 4 10 0.75 2 50 80 15 N N SOIC, PDIP $0.75
Input
OPAy227 Precision, Low Noise, 1, 2, 4 5 36 3.8 8 2.3 0.075 0.1 10000 120 3 N N PDIP, SOIC $1.10
Bipolar
OPAy228 Precision, Low Noise, 1, 2, 4 5 36 3.8 33 11 0.075 0.1 10000 120 3 N N PDIP, SOIC $1.10
G = 5, Bipolar
OPAy132 Wide Bandwidth, FET- 1, 2, 4 5 36 4.8 8 20 0.5 2 50 96 8 N N PDIP, SOIC $1.45
Input
OPA124 Low Noise, Precision, 1 10 36 3.5 1.5 1.6 0.5 2 2 94 8 N N SOIC $3.95
Bipolar
OPA627 Ultra-Low THD+N, 1 9 36 7.5 16 55 0.25 0.8 5 106 5.2 N N PDIP, SOIC $12.25
Difet™
OPA637 Ultra-Low THD+N, 1 9 36 7.5 80 135 0.25 0.8 5 106 5.2 N N PDIP, SOIC $12.25
G = 5, Difet
OPAy211 Ultra-Low Noise, High- 1, 2 4.5 36 4.5 80 27 0.125 0.35 175000 114 1.1 N N MSOP, SOIC, SON $3.45
Precision
OPAy827 Ultra-Low THD+N, 1, 2 8 36 5.2 22 28 0.15 1 50 104 4 N N MSOP, SOIC $5.75
High-Precision
TLV240x 2.5V, 1µA, Bipolar 1, 2, 4 2.5 16 0.00095 0.005 0.0025 1.2 3 300 70 800 Y I/O SOT23, SOIC, PDIP $0.65
TLV238x Low Power, RRIO, Bipolar 1, 2 2.7 16 0.01 0.16 0.06 4.5 1.1 60 58 90 Y I/O SOT23, SOIC, PDIP $0.60
TLC220x Precision, Low Noise, 1, 2 4.6 16 1.5 1.9 2.7 0.5 0.5 100 90 8 Y Out SOIC, PDIP, SO $1.65
LinCMOS
TLC08x Low Noise, Wide 1, 2, 4 4.5 16 2.5 10 16 1.4 1.2 50 80 8.5 Y N MSOP, SOIC, PDIP $0.45
Bandwidth, Bipolar
TLV237x 550µA, 3MHz, SHDN 1, 2, 4 2.7 16 0.56 2.4 2 4.5 2 60 55 39 Y I/O SOT23, MSOP, $0.55
TSSOP, PDIP, SOIC
OPAy703/4 12V, Low Power, SHDN, 1, 2, 4 4 12 0.2 3 3 0.75 4 10 80 45 Y I/O MSOP, SOIC, PDIP $1.30
CMOS
OPAy734/5 12V, Auto-Zero 1, 2 2.7 12 0.75 1.6 1.5 0.005 0.01 200 115 135 Y Out SOT23, SOIC $1.25
Precision, SHDN
OPAy743 12V, 7MHz, CMOS 1, 2, 4 3.5 12 1.5 7 10 7 8 10 70 30 Y I/O MSOP, SOT23, $1.00
SOIC, PDIP
OPAy727/8 20MHz, e-trim™ 1, 2, 4 4 12 6.5 20 30 0.15 0.3 500 86 23 Y N MSOP, SON $0.95
Precision CMOS
OPAy725/6 Very Low Noise, SHDN 1, 2 4 12 5.5 20 30 3 4 200 94 23 Y Out SOT23, SOIC $0.90
OPAy145 Low Power-Precision 1, 2, 4 4.5 36 0.5 1.4 3.2 0.4 1 10 100 17 Y Out SOT23, MSOP $1.30
FET-Input
OPAy207 Precision, Low Noise, RRO 1, 2, 4 4 36 0.6 1 0.35 0.05 0.7 1000 126 7 N Out SOT23, SON $1.05
OPAy245 Precision, Low Noise, 1, 2, 4 4.5 36 0.75 1 0.35 0.175 1.5 5000 126 7 N Out SOIC, SOT23, $0.75
RRO SON, DFN, QFN
OPA1611 High Performance, 1, 2 4.5 36 4.5 80 27 0.5 — 175000 110 1 N N SOIC $1.75
Bipolar-Input, Audio Amp
*Suggested resale price in U.S. dollars in quantities of 1,000. . New products are listed in bold red. Preview products are listed in bold blue.
High-Speed Amplifiers
➔
TI develops high-speed signal has the primary benefit of reducing even Fixed and variable gain—these amps
conditioning products using state-of- order harmonics, thereby reducing total have either a fixed gain, or a variable
the-art processes that give leading- harmonic distortion. The FDA also rejects gain that can be set either digitally with
edge performance. Used in high-speed common-mode components in the signal a few control pins, or linearly with a
signal chains and analog-to-digital and provides a larger output swing to the control voltage. Fixed-gain amplifiers
drive circuits, high-speed amps are load relative to single-ended amplifiers. are fixed internally with gain setting
broadly defined as any amplifier having Fully differential amplifiers are well-suited resistors. Variable gain amplifiers can
at least 50MHz of bandwidth and at to driving analog-to-digital converters. A have different gain ranges, and can also
least 100V/µs slew rate. High-speed VCOM pin sets the output common-mode be differential input and/or output.
amps from TI come in several different voltage required by newer, single-
types and supply voltage options. supply, ADCs. Packaging—high-speed amplifiers
typically come in surface-mount
Design Considerations FET-Input (or CMOS) amplifiers—have packages, because parasitics of DIP
Voltage-feedback type—the most higher input impedance than typical bipolar packages can limit performance. Industry
commonly used amp and the basic building amps and are more useful to interfacing standard surface-mount packages
block of most analog signal chains such to high impedance sources, such as (SOIC, MSOP, TSSOP and QFN) handle
as gain blocks, filtering, level shifting, photodiodes in transimpedance circuits. the highest speed requirements. For
buffering, etc. Most voltage-feedback bandwidths approaching 1GHz and
amps are unity-gain stable, though some Video amplifiers—can be used in a higher, the QFN package decreases
are decompensated to provide wider number of different ways, but generally inductance and capacitance.
bandwidth, faster slew rate and lower noise. are in the signal path for amplifying,
buffering, filtering or driving video lines. Evaluation boards—high-speed amps have
Current-feedback type—most commonly The specifications of most interest are an associated fully populated evaluation
seen in video or DSL line driver differential gain and differential phase. module (EVM) or an unpopulated printed
applications, or designs where extremely Current-feedback amps are typically circuit board (PCB). These boards are a
fast slew rate is needed. used in video applications, because of very important part of high-speed amplifier
their combination of high slew rate evaluation, since layout is critical to design
Fully differential amplifier (FDA)—the fully and excellent output drive at low success. To make layout simple, Gerber
differential input and output topology quiescent power. files for the EVMs are available.
See page 121 for more information.
Very High-Speed > 500MHz (GBW Products) Rail-to-Rail Input or Output Voltage Limiting Output Very High-Speed > 500MHz
Video
➔
3-Channel HDTV Video Amplifier with 5th-Order Filters and 6dB Gain
THS7316
Get samples, datasheets, evaluation modules and application reports at: www.ti.com/sc/device/THS7316
Key Features The THS7316 is a low-power, single-supply 3V to 5V, 3-channel integrated video
• 5th-order 36MHz (–3dB) Butterworth buffer. It incorporates a 5th-order modified Butterworth filter and 6dB gain stage
filter which can be used as a DAC reconstruction filter or an ADC anti-aliasing filter,
• Flexible input configuration enabling significant space saving. The 36MHz filter is a perfect choice for HDTV
• Built-in 6dB gain video which includes G’B’R’(R’G’B’), and Y’P’BP’R 720p/1080i and VGA/SVGA/
• Total quiescent current: XGA signals.
18.3mA at 3.3V
3.3V Y’ / G’ Out
• Low differential gain/phase: 75Ω
0.1%/0.1°
• Rail-to-rail output DAC/
Y’ / G’ 75Ω
Encoder
THS7316
R
Applications HDTV 1 CH.1 IN CH.1 OUT 8
P’B / B’ Out
75Ω
• Set-top-box output video buffering 720p/1080i P’B / B’ 2 CH.2 IN CH.2 OUT 7
Y’P’BP’R
• PVR/DVDR output buffering G’B’R’ R 3 CH.3 IN CH.3 OUT 6 75Ω
• Portable/USB low-power video VGA 4 VS+ GND 5
P’R / R’ Out
buffering SVGA P’R / R’
75Ω
XGA
R
3.3V
75Ω
4-Channel, SDTV Video Amplifier with 6th-Order Filters and 6dB Gain
THS7374, THS7375
Get samples, datasheets, evaluation modules and application reports at: www.ti.com/sc/device/THS7374,
and www.ti.com/sc/device/THS7375
Key Features The THS7374 and THS7475 are low-power, single-supply +3V to +5V, 4-channel
• 6th-order 9.5MHz (-3dB) Butterworth integrated video buffers. The THS7374 features rail-to-rail output stage with 6dB
filter gain, which allows for both ac and dc line driving. The 15dB gain of the THS7375
• Filter bypass mode in THS7374 allows makes it compatible for use with DaVinci™ processors. Both devices incorporate
150MHz bandwidth a 6th-order, 9.5MHz Butterworth filter (with bypass mode in the THS7374) that
• Flexible input configuration can be used as a DAC reconstruction filter or an ADC anti-aliasing filter. The filters
• Built-in 6dB gain (THS7374), 15dB make them a perfect choice for SDTV video processing which includes Composite
gain (THS7375) (CVBS), S-Video and Y’U’V’, G’B’R’(R’G’B’), and Y’P’BP’R 480i/576i and SCART.
• Total quiescent current:16mA at 3.3V
• Low differential gain/phase: 0.5%/0.5° +3.3V CVBS / Sync
75Ω
• Rail-to-rail output
• Small TSSOP-14 package DAC/ CVBS 75Ω
THS7374
Applications Encoder R
Y’/ G’ Out
1 CH.1 IN CH.1 OUT 14
75Ω
• Set-top-box output video buffering Y’/ G’ 2 CH.2 IN CH.2 OUT 13
SDTV
• PVR/DVDR output buffering CVBS R 3 CH.3 IN CH.3 OUT 12
75Ω
Y’P’BP’R
• Portable/USB low-power video R’G’B’ P’B / R’
4 CH.4 IN CH.4 OUT 11
P’B / B’ Out
75Ω
buffering R
5 DISABLE VS+ 10
6 GND GND 9
75Ω
7 GND GND 8
P’R / R’
P’R / R’ Out
R
75Ω
To GPIO +3V to 5V
Controller 75Ω
or GND
Figure 1. 3.3V Single-Supply DC-Input/DC Output Coupled Video Line Driver
3.3V single-supply DC-Input/DC Output coupled video line driver.
Amplifiers for Line Driver or load stability (for ARB generators or a The OPA2673 is the first amplifier to
Applications high cap load driver). combine active off-line control with
Line driver is a generic term that covers a current-feedback amplifier. The
large subsets of applications that For wireline communications, the two active off-line control ensures that the
typically require high bandwidth, large latest introductions are the THS6204 for amplifier is maintained into the off-mode
slew rate, and high output current, the xDSL market and the OPA2673 for when a large signal is driven directly
combined with sufficient output voltage the PLC market. Although specified for on its output, a feature not offered by
swing. The load can be inductive, the VDSL market, THS6204 can be used standard current-feedback architecture.
resistive, or capacitive, and the circuit in any fully differential application that This feature of the OPA2673 allows
configuration can vary from single- requires a combination of high slew rate, simplification of the control circuitry for
ended to fully differential. Once the high bandwidth and high output current. TDMA and reduces both the complexity
minimum requirement to driving the It is intended to drive heavy loads and the cost of the system.
load to the adequate frequency with (25Ω) and yet maintain a large output
the adequate distortion is achieved, swing. Its large slew rate (2600V/μs)
each individual end-application will allows the bandwidth to be maintained
have its own important specifications. independently of the output voltage
These specifications generally include swing and the frequency. The OPA2673
differential gain and differential phase (for is a +12V high output current operational
a broadcast video line driver), quiescent amplifier with an active off-line control.
power and noise (for xDSL applications),
9.1Ω
CODEC
VIN–
–12V
Key Features The OPA2673 offers the low distortion and high output current required in
• Single +12V supply operation emerging xDSL and power-line modem driver applications. Operating from a single
• High output current: 700mA +12V supply, the OPA2673 consumes a low 15mA/channel quiescent current to
• Output voltage swing: 9.8Vpp deliver a very high 700mA output current. The output current can also drive up to
• Wide bandwidth: 350MHz (G= +4V/V) 10 parallel video loads (15Ω) with less than 0.1%/0.1° dG/dP nonlinearity. A flexible
• Low supply current: 15mA/channel power control feature with two logic control lines allows four quiescent power
• Flexible power control settings; full-power, power cutback for short loops, an idle state for no signal
+12V
• Active off-line for TDMA transmission, but line match maintenance, and offline with active offline control to
• Packaging: MSOP-10 PowerPAD™ provide a high impedance even with 1/2large signals present at the output pin.
OPA2673
or QFN-16
511Ω 5Ω 1:1.4
Applications
• Power line modems +6.0V 2kΩ 1F
• xDSL line drivers 2VPP 50Ω 8VPP
348Ω
• Cable modem drivers 2kΩ 511Ω 5Ω
• Matched I/Q channel amplifiers
• Broadband video line drivers 1/2
OPA2673
• ARB line drivers
• High cap load drivers
OPA2673, single-supply line driver.
Single-Supply Line Driver
Line Drivers Selection Guide
BW BW Slew VN VOUT Swing Power IQ/ IOUT Disable
Gain = 1 Gain = +2 Rate f > 1MHz (RLOADΩ) Supply Amplifier (mA) /Power
Device Description (MHz) (MHz) (V/µs) (nV/√Hz) (min) (V) Range (V) (mA) (max) (min) Control Package(s) Price*
THS6204 Dual Port, Differential — 114 3800 2.5 ±4.9(100) ±5 to ±14 21.5/port ±416 Y QFN, HTSSOP $1.40
VDSL2 Line Driver
OPA2691 Dual, Wideband, CFB Amp 280 225 2100 1.7 ±3.7 (100) +5 to ±6.0 5.3 ±190 Y SOIC $2.30
w/Disable
OPA2690 Dual, Wideband, VFB Amp 500 220 1800 5.5 ±3.7 (100) +5 to ±6.0 5.8 ±190 Y SOIC $2.15
w/Disable
THS6093 ADSL CPE Line Driver w/ 90 — 400 2.1 1.3 to 3.7 (100) ±2.25 to ±7 9.5 ±240 Y SOIC, HTSSOP $2.15
Shutdown
THS6092 ADSL CPE Line Driver 90 — 400 2.1 1.3 to 3.7 (100) ±2.25 to ±7 12 ±240 N SOIC, SOIC PowerPAD™ $2.15
THS6042 ADSL CPE Line Driver 120 95 600 2.2 ±4.1(25) ±5 to ±15 9.5 ±300 N SOIC, SOIC PowerPAD $2.65
THS6043 ADSL CPE Line Driver w/ 120 95 600 2.2 ±4.1(25) ±5 to ±15 9.5 ±300 Y SOIC, HTSSOP $2.70
Shutdown
OPA2614 Dual, High IO w/Current — 180 145 1.8 ±4.9 (100) +5 to ±6.3 6 ±350 N SOIC, SOIC PowerPAD $1.55
Limit
OPA2613 Dual, High IO w/Current 230 110 70 1.8 ±4.9 (100) +5 to ±6.3 6 ±350 N SOIC, SOIC PowerPAD $1.55
Limit
OPA2677 Dual, Wideband, High IO 220 200 2000 2 ±5.0 (100) +5 to ±6.3 12 ±380 N SOIC, SOIC PowerPAD, $1,40
QFN
OPA2674 Dual Wideband, High IO 250 225 2000 2 ±5.0 (100) +5 to ±6.3 9.3 ±380 Y SOIC $1.60
w/Current Limit
THS6184 Dual Port, Low Power Diff. 50 40 340 3 ±4.1(100) ±4 to ±12 4.2 ±400 Y QFN, HTSSOP $3.75
xDSL Line Driver
THS6132 High Efficiency Class-G 80 70 300 3.5 ±9.9 (30) ±3.0 to 3 ±400 Y SOIC, SOIC PowerPAD, $2.65
ADSL Line Driver ±16.5 QFN
THS6182 Low Power ADSL Line 100 80 450 3.2 3.7 (25) 4 to 16.5 12.5 ±450 Y SOIC, SOIC PowerPAD, $2.95
Driver QFN
OPA2673 Dual, High IO w/Active 600 450 3000 2.4 ±4.8 (100) 3.5 to 6.5 19 ±700 Y QFN, MSOP $1.65
Off-Line Control
OPA4684 Quad low Power CFB Amp 250 170 750 3.7 ±3.9 (1000) +5 to ±6.0 1.8 –100/+120 N SOIC, TSSOP $3.65
OPA2683 Dual Very Low Power 200 150 400 4.4 ±4.1(1000) +5 to ±6.0 2.06 –100/+120 Y SOIC, MSOP, SOT23-8 $1.85
CFB Amp
OPA2684 Dual Low Power CFB Amp 250 170 750 3.7 ±3.9 (1000) +5 to ±6.0 1.8 –100/+130 N SOIC, SOT23-8 $2.10
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
Amplifiers for Industrial Texas Instruments offers a broad wideband current-feedback (CFB) op
Applications portfolio of high-speed amplifiers that amps. The ±4.1V (VS = ±5V) output
are very well suited for a wide array of voltage swing minimizes distortion
Key segments in the industrial market
industrial applications requiring high when used as an ADC driver and the
requiring high-speed amplifiers
speed. The OPA695 family, which low 1.1mA/channel quiescent current
include, but are not limited to; test
includes the OPA695 (single), the new supports power sensitive applications.
and measurement, aerospace/
OPA2695 (dual) and OPA3695 (triple) are And for applications requiring a dual with
military, telecommunications and
good examples of high-speed amplifiers even lower power savings, the OPA2889
medical (particularly medical imaging).
that can be used for both filtering and features a very low quiescent current of
In these applications, high-speed
ADC driver applications. The OPA2695 only 460µA/channel.
amplifiers are typically used for filtering,
is an excellent choice for differential
transimpedance, voltage limiting and
applications requiring high input +VCC
as drivers for data converters. Each
impedance.
of these applications has its own key VCM
OPA2695
VCM
−VCC
Features: The THS4521(single),THS4522 (dual), and THS4524 (quad) are negative rail input,
• Power supply: +2.7V (±1.35) to rail-to-rail output, fully differential amplifiers operating from a single +2.7 to +5V
+5V (±2.5V) supply. The low 1mA/channel quiescent current and power down capability to 1µ
• Quiescent current: 1mA A make it a good choice for low power applications. The output common-mode
• Input voltage noise: 5nV/√Hz control with low offset and drift allows for dc-coupling in high accuracy
• Slew rate: 490 V/µs data acquisition systems.
• Negative rail-input and
499
rail-to-rail output
• Common mode control
• Bandwidth: 150MHz
• Packaging: SO-8 and MSOP-8 (single), 499
TSSOP-16 (dual) and TSSOP-38 (quad) + -
Differential Differential
Applications: ID OD
• ADC drivers - +
• Low-power data acquisition systems 499
• Portable instruments
499
Key Features The OPA2695 is a wide-bandwidth, current-feedback amplifier with disable that
• Gain = +2V/V bandwidth (850MHz) features an exceptional 2900V/µs slew rate and low 1.8nV/√Hz input voltage noise. The
• Gain = +8V/V bandwidth (450MHz) device has been optimized for high gain operation. The pin-out provides symmetrical
• Slew rate: 2900V/µs input and output paths making the OPA2695 well suited as a differential ADC driver.
• Output voltage swing: 4.1V The low 12.9mA/channel supply current is precisely trimmed at +25°C. This trim, along
• Low quiescent current: 12.9mA/ch with a low temperature drift, gives low system power over temperature.
• Low disable current: 200µA/ch
+5V
• Single (OPA695) and triple (OPA3695)
• Packaging: SO-8 (without disable)
or QFN-16 (with disable) 1/2
OPA2695
Applications
RF
• Very wideband ADC drivers I T G
RG 500
• Portable instruments 1:1
VI
• Active filters
• Low-cost precision IF amplifiers RL
RT VO
RF 800
RG 500
VO 500 1/2
= = GD OPA2695
VI RG
5V
OPA695 functional block diagram.
Features The OPA2889 is a dual, wideband, low-power amplifier with disable. The new
• Flexible supply range: internal architecture offers slew rate and full-power bandwidth previously only
+2.6V to +12V single supply found in wideband current-feedback amplifiers. These capabilities coupled with
±1.3V to ±6V dual supply a very low quiescent current of only 460µA per channel makes it very well-suited
• Slew rate: 250V/µs for portable instrumentation. Operating from ±5V supply, the OPA2889 can deliver
• Output voltage swing: ±4V a ±4V output swing with over 40mA drive current and 60MHz bandwidth, which
• Wideband ±5V operation: 60MHz make it ideal as an RGB line driver, single-supply ADC input driver or low-power,
(G = +2V/V) twisted-pair line receiver.
• Low quiescent current: 460µA/ch +6V +5V
1kΩ 50Ω
• Low disable current: 18µA Vi
0V 4V 1/2 16Ω
• Packaging: SO-8 or MSOP-10 500pF 200Ω OPA2889
-6V ADS8472
200Ω
Applications
16-Bit
• Video line drivers 750Ω 0.01 F 1MSPS
• xDSL line receivers 750Ω
• High-speed imaging channels
+6V
• ADC buffer 16Ω
1/2
• Portable instruments VREF /2
375Ω OPA2889
• Active filters
6V
Pole
High-Speed Amplifiers
➔
High-Speed Amplifiers
➔
Applications
• Medical imaging, ultrasound systems VCA8500 functional block diagram.
• Portable systems
• Low- and mid-range systems
Key Features The VCA820, VCA821, VCA822 and VCA824 are dc-coupled, wideband, variable
• Gain adjust range: >40dB gain amplifiers with linear gain adjustment control for >40dB gain range. These
• High gain accuracy: 20dB ±0.4dB amplifiers provide a differential input to single-ended conversion with a high-
• Small signal bandwidth (G=+2): impedance gain control input used to vary the gain where the VCA820/821 feature
710MHz (VCA821/824), 150MHz linear in dB gain control and the VCA822/824 linear in V/V gain control.
(VCA820/822)
• Slew rate: 2500V/µs (VCA821/824), RF
V IN1 +V IN
1700V/µs (VCA820/822)
RG+
• Output current; ±160mA (VCA820/822), RS
RL
R1 FB
±90mA (VCA821/824) RG V OUT
VCA822
• Voltage noise: 8.2nV/√Hz C1 CL
(VCA820/822), 6nV/√Hz (VCA821/824) RG–
• Packaging: MSOP-10 or SO-14 V IN2 –VIN 20Ω 9
Equalized Frequency
6
Response
RS
Applications 3
0
• Differential line receivers –3
Gain (dB)
• Differential equalizers (VCA822/824)
–6
–9 Initial Frequency Response
VCA822 as differential equalizer. of VCA822 with RC Load
• Voltage-tunable active filters –12
–15
• Pulse amplitude compensation –18
RL = 75
–21
• Variable attenuators –24
CF = 100pF
1M 10M 100M 1G
• AGC receivers with RSSI (VCA820/821) Frequency (Hz)
1.1
Design Considerations TLC3702, TLC3704 D, Q, 20µA/ch
Output topology
7
• Open collector—connects to the TLV3491, TLV3492 S, D, Q, 1.2µA/ch
Slower
Key Features The TLV3501 is a high-speed comparator in a small SOT23 package. Designed
• High speed: 4.5ns response at 20mV for a variety of applications, TLV3501 offers very fast response relative to power
overdrive consumption. It is specified over the extended temperature range of –40°C to
• Beyond-the-rail common-mode input +125°C.
PROPAGATION DELAY vs. OVERDRIVE VOLTAGE
range 9
• Rail-to-rail, push-pull output VCM = 1V
VS = 5V
8
• Single-supply operation: 2.7V to 5.5V CLOAD = 17pF
Propagation Delay (ns)
Rise
• Packaging: SOT23 7
6
Applications Fall
5
• Test and measurement
• Power supply monitoring 4
Comparators
➔
Key Features The TLV3011 is a low-power, open-drain output comparator; the TLV3012 is a
• Comparator and voltage reference: push-pull output comparator. The integrated 1.242V series voltage reference offers
TLV3011: open-drain output low 100ppm/°C (max) drift, is stable with up to 10nF capacitive load and can
TLV3012: push-pull output provide up to 0.5mA (typ) of output current.
• Integrated voltage reference: 1.2V,
V+
1% initial accuracy, 40ppm/°C drift
• Low quiescent current: 5µA max
• Wide input common-mode range:
200mV beyond rails R1
DI
• Propagation delay: 6µs 1MΩ RPULL-UP(1) MSP430
• Very-low voltage operation: 1.8V to 5.5V 10kΩ
• Packaging: SC-70 and SOT23 C1
RESET
10nF 1.242V TLV301x
Applications
• Battery voltage monitoring REF
• Power good function
• Low signal/voltage detection
• Relaxation oscillator TLV3011 or TLV3012 configured to power-up reset for MSP430.
Note: (1) Use RPULL-UP with the TLV3011 only.
Difference Amplifiers
➔
Current shunt monitors are a unique class Common-Mode Voltage Current Output vs.
of high common-mode voltage difference The common-mode voltage range Voltage Output
amplifiers that have the ability to operate is typically the first parameter to be Another broad category is the type
on single, low-voltage supplies. considered and this breaks down into of output. The current output families
two basic categories of current shunt enable the gain to be set by selecting
Current shunt monitors have a common- monitors: families that handle only the value of an external load resistor.
mode voltage range that is independent positive common-mode voltages above The fastest current shunt monitor is
of power supply (as opposed to classical +2.7V (with a choice of upper limits the INA139 or INA169. Current output
difference amplifiers where the common- up to +60V); and a family that handles INA170, and current output devices
mode voltage range is proportional to –16V to +80V. The ability to sense have a minimum common-mode
power supply voltage). Unlike most common-mode voltages at ground voltage of +2.7V, with a maximum
high common-mode voltage difference and below is required when the power up to +60V.
amplifiers, current sense shunt monitors supply that the current is being sensed
have gains for sensing low differential from could get shorted out, or if the Voltage output current shunt monitors
voltages (50 to 100mV). shunt resistor is in an inductive load have the advantage of a buffered
that could be exposed to inductive voltage output which eliminates the
Current sensing can be done on either kickback. In addition, a common-mode need for an additional op amp in
the low-side (ground) or high-side (power range to –16V allows the current shunt many applications. These devices are
supply). Low-side sensing is simple and monitor to be used to sense current in available in fixed gains of 14, 20, 50
requires no special components, but it –12V to –15V power supplies. Lastly, it and 100. The voltage output current
often cannot be used because it either easily withstands battery reversals in shunt monitors all have a common-
disturbs ground or requires additional 12V automotive applications. mode range of –16V to +80V.
wiring. Current shunt monitors are
intended to make it easy to implement
high-side current sensing. Discrete See Page 92 for a complete selection
solutions to high-side sensing are difficult of digital output current shunt monitors.
and costly to implement.
Key Features The INA21x devices are voltage-output, current shunt monitors that can sense
• Wide common-mode range: drops across shunts at common-mode voltages from –1V to +26V, independent
–0.3V to +26V of the supply voltage. Five gains are available: 50V/V, 100V/V, 200V/V, 500V/V or
• Offset voltage: ±35µV (max) (Enables 1000V/V. The low offset of the zero-drift architecture enables current sensing with
shunt drops of 10mV full-scale) maximum drops across the shunt as low as 10mV full-scale.
• Accurate:
Gain: ±1% (max)
Offset drift: 0.5µV/ºC (max)
Gain drift: 25ppm/ºC (max) REF 1 6 OUT
• Gain range: 50V/V to 1000V/V
• Supply voltage: +2.7V to +18V GND 2 5 IN–
• Quiescent current: 100µA (max)
V+ 3 4 IN+
• Package: SC70
Applications
• Notebook computers INA210 pin-out diagram.
• Cell phones
• Telecom equipment
• Automotive
• Battery chargers
• Welding equipment
–
OUT
Applications 33.3kΩ
• Welding equipment REF2
• Automotive GND
• Battery chargers
INA28x functional block diagram. Expected release date 1Q 2009.
Current Shunt Monitors Selection Guide
Offset IQ Per
Offset Drift CMRR BW Power Ch.
(µV) (µV/ºC) (dB) (MHz) Output Voltage Supply (mA)
Device Description Ch. Gain (max) (max) (typ) (typ) Swing (V) (min) (V) (max) Package(s) Price*
Voltage-Output, High-Side Current Shunt Monitors
INA19x –16V to +80V CMV 1 20, 50, 100 2000 2.5 120 0.5, 0.3, 0.2 V(+) –0.2 +2.7 to +18 0.9 SOT23-5 $0.80
INA20x Single/Dual Comparator, 1 20, 50, 100 2500 3.5 123 0.5, 0.3, 0.2 V(+) –0.25 +2.7 to +18 2.2 SO-14, $1.25
VREF TSSOP-14,
MSOP-10,
MSOP/SO/DFN-8
INA27x –16V to +18V CMV, 1 14, 20 2000 2.5 120 0.13 V(+) –0.2 +2.7 to +18 0.9 SO-8 $0.80
Filtering Provision
INA21x Zero Drift, Bi-Directional, 1 50, 100, 200, 35 0.5 140 0.014 V(+) –0.1 +2.7 to +26 0.1 SC-70 $0.65
–0.3V to +26V CMV 500, 1000
INA28x Zero Drift, Bi-Directional, 1 50, 200, 500, 10 0.05 100 0.014 V(+) –0.1 +2.7 to +18 0.9 SO-8, DFN-10 $0.95
–16V to +80V CMV 1000
Current-Output, High-Side Current Shunt Monitors
INA138 36V (max) 1 1 to 100 1000 1 120 0.8 0 to (V+) –0.8 +2.7 to +36 0.045 SOT23-5 $0.99
INA168 60V (max) 1 1 to 100 1000 1 120 0.8 0 to (V+) –0.8 +2.7 to +60 0.045 SOT23-5 $1.55
INA139 High Speed, 40V (max) 1 1 to 100 1000 1 115 0.44 0 to (V+) –1.2 +2.7 to +40 0.125 SOT23-5 $0.99
INA169 High Speed, 60V (max) 1 1 to 100 1000 1 120 0.44 0 to (V+) –1.2 +2.7 to +60 0.125 SOT23-5 $1.35
Bidirectional Current Shunt Monitors
INA170 60V (max) 1 1 to 100 1000 1 120 0.4 0 to V(+) –1.2 +2.7 to +40 0.125 MSOP-8 $1.45
INA209 Voltage Current, Power 1 — 100 0.1 120 — — 3 to 5.5 1.5 TSSOP-16 $3.50
Over I2C
INA219 Low Cost, Voltage 1 — 100 0.1 120 — — 3 to 5.5 1.5 SOT23-8 $1.85
Current, Power Over I2C
INA21x Zero Drift, Bi-Directional, 1 50, 100, 200, 35 0.5 140 0.014 V(+) –0.1 +2.7 to +26 0.1 SC-70 $0.65
–0.3V to +26V CMV 500, 1000
Zero Drift, Bi-Directional, 50, 200, 500,
INA28x 1 10 0.05 100 0.014 V(+) –0.1 +2.7 to +18 0.9 SO-8, DFN-10 $0.95
–16V to +80V CMV 1000
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red. Preview products are listed in bold blue.
Instrumentation Amplifiers
➔
Three-Op-Amp Version rail-to-rail instrumentation amps suitable input stage instrumentation amps and
The three-op-amp topology is the for a wide variety of applications have a 3dB rolloff at essentially the same
benchmark for instrumentation amplifier requiring maximum dynamic signal frequency in both G = 1 and G = 10
performance. These devices provide range. configurations.
a wide gain range (down to G = 1) and
generally offer the highest performance. Gain requirement—for high-gain Technical Information
Symmetrical inverting and non-inverting applications consider a low total noise IAs output the difference accurately
gain paths provide better common- device, because drift, input bias current between the input signals providing
mode rejection at high frequencies. and voltage offset all contribute to error. Common-Mode Rejection (CMR). It is
Some types use current-feedback-type the key parameter and main purpose
input op amps which maintain excellent Common-mode voltage range—the for using this type of device. CMR
bandwidth in high gain. voltage input range over which the measures the device’s ability to reject
amplifier can operate and the differential signals that are common to both inputs.
Two-Op-Amp Version pair behaves as a linear amplifier for
The two-op-amp topology can provide differential signals. IAs are often used to amplify the
wider common-mode voltage range, differential output of a bridge sensor,
especially in low-voltage, single-supply Input bias current—can be an important amplifying the tiny bridge output
applications. Their simpler internal factor in many applications, especially signals while rejecting the large
circuitry allows lower cost, lower those sensing a low current or where common-mode voltage. They provide
quiescent current and smaller package the sensor impedance is very high. The excellent accuracy and performance,
sizes. This topology, however, does INA116 requires only 3fA typical of input yet require minimal quiescent current.
not lend itself to gains less than four bias current. Gain is usually set with a single
(INA125) or five (all others). external resistor.
Offset voltage and drift—IAs are
Design Considerations generally used in high-gain applications, In some applications unwanted
Supply voltage—TI has developed a where any amp errors are amplified common-mode signals may be less
series of low-voltage, single-supply, by the circuit gain. These errors can conspicuous. Real-world ground
become significant unless VOS and interconnections are not perfect. What
RG V+
drift performance are considered in may, at first, seem to be a viable single-
the device selection. Bipolar input ended amplifier application can become
stage INAs generally have smaller error an accumulation of errors. Error voltages
100kΩ 25kΩ 25kΩ 100kΩ
contribution from offset and drift in low caused by currents flowing in ground
Ref
source inpedance applications. loops sum with the desired input signal
A1 and are amplified by a single-ended input
VIN A2 Current-feedback vs. voltage-feedback amp. Even very low impedance grounds
VO can have induced voltages from stray
input stage—appropriate for designers
VIN
needing higher bandwidth or a more magnetic fields. As accuracy requirements
consistent 3dB rolloff frequency over increase, it becomes more difficult to
VO = (VIN – VIN ) • G + VREF Single Dual
Supply
V–
Supply various gain settings. The INA128 and design accurate circuits with a single-
INA129 provide a significantly higher 3dB ended input amplifier. The differential input
Two-op-amp topology provides wider common-mode range in
low-voltage, single-supply applications. rolloff frequency than voltage-feedback instrumentation amplifier is the answer.
Key Features The INA333 is a low-power, precision instrumentation amplifier offering excellent
• Low offset voltage: 25µV (max) accuracy. A single external resistor sets any gain from 1 to 10,000 and provides
• Low drift: 0.1µVV/ºC as industry-standard equation (G = 1 + (100kΩ/RG)). With its 3-op-amp design, low
• Low input bias current: 200pA (max) quiescent current and operation with power supplies as low as +0.9V, it is ideal for
• Low noise: 50nV/√Hz a wide range of portable applications.
• Supply voltage: +1.8V to +5.5V V+
–
Applications
–
• Bridge amplifiers 50kΩ
A3
RG Vo
• Weigh scales G = 1 + (100kΩ/RG)
50kΩ +
• Data acquisition
Key Features The INA821 is a low-power, precision instrumentation amplifier offering excellent accuracy.
• Voltage offset : 25µV (max) with The versatile 3-op-amp design and small size make it ideal for a wide range of
0.3µV/°C drift applications. Current-feedback input circuitry provides wide bandwidth, even at
• Input bias current: 10nA (max) high gain (200kHz at G = 100).
• High CMR vs. frequency: 80dB
A single external resistor sets any gain from 1 to 10,000. The INA821 provides an industry-
at 10kHz
standard gain equation: G = 1 + (49.4kΩ/RG). It is laser trimmed for very low offset voltage
• ±40V input protection
(25µV) and high common-mode rejection (130dB at G = 100). It operates with supplies as
• Supply voltage: ±2.25V to ±18V
low as ±2.25V. Internal input protection can withstand up to ±40V without damage.
• Temperature range: –40°C to +125°C
• Packaging: MSOP, SO, and DFN The INA821 will be available in SO-8, MSOP-8, and 3x3mm DFN-8 and is specified for the
3x3mm –40°C to +125°C temperature range.
Applications
• Bridge amplifiers V+
– 10kΩ 10kΩ
Over-Voltage + VREF
V–OUT Protection
V–
Programmable gain instrumentation Secondary Fast settling time (3.5µs to 0.01%) allows
amplifiers (PGAs) are extremely versatile Gain error and drift—for higher gain, fast polling of many channels.
data acquisition input amplifiers that high-precision applications will require
provide digital control of gain for improved closer attention to drift and gain error. The PGA204 and PGA205 have precision
accuracy and extended dynamic range. bipolar input stages especially well
Many have inputs that are protected Input bias current— high source suited to low-level signals. The PGA205
to ±40V even with the power supply impedance applications often require FET- has gain steps of 1, 2, 4 and 8.
off. A single input amplifier type can be input amps to minimize bias current errors.
connected to a variety of sensors or Typical Applications
signals. Under processor control, the Technical Information • Data acquisition
switched gain extends the dynamic range The PGA206 provides binary gain steps • Auto-ranging circuits
of the system. • Remote instrumentation
of 1, 2, 4 and 8V/V, selected by CMOS-
or TTL-compatible inputs. The PGA207 • Test equipment
All PGA-series amps have TTL- or • Medical/physiological instrumentation
has gains of 1, 2, 5 and 10V/V, adding a
CMOS-compatible inputs for easy • General analog interface boards
full decade to the system dynamic range.
microprocessor interface. Inputs are
The low input bias current, FET-input
laser trimmed for low offset voltage and
stage assures that series resistance of
low drift to allow use without the need of
the multiplexer does not introduce errors.
external components.
V+IN
Design Considerations A1 A1
Primary AO PGA205 AO PGA205 VO
V–IN
Digitally-selected gain required—two pins
allow the selection of up to four different
gain states. A PGA202 and PGA203 can be GAIN A3 A2 A1 A0
put in series for greater gain selection. 1 0 0 0 0
2 0 1 0 0
4 1 0 0 0
8 1 1 0 0
Non-linearity (accuracy)—depends heavily 16 1 1 0 1
32 1 1 1 0
on what is being driven. A 16-bit converter 64 1 1 1 1
Key Features The PGA11x series offers 2-, 6- or 10-channel analog inputs, binary or scope
• Rail-to-rail input/output gains, and four internal calibration channels, respectively, tied to VREF, GND,
• Offset: 100µV w/0.35µV/°C 0.9VCAL and 0.1VCAL, where VCAL is an external voltage connected to Channel 0.
• Gain error: 0.05% (typ) The 6- and 10-channel versions offer SPI daisy-chain capability and a hardware
• Binary gains: 1, 2, 4, 8, 16, 32, 64, 128 shutdown pin.
(PGA112/16) +5V +3V
• Scope gains: 1, 2, 5, 10, 20, 50, 100, AVDD DVDD
Key Features The PGA308 is a programmable analog sensor signal conditioner. The analog signal
• Digital calibration for bridge sensors path amplifies the sensor signal and provides digital calibration for offset and gain.
• Offset select: coarse and fine Gain and offset calibration parameters are stored onboard in seven banks of one-time
• Gain select: coarse and fine programmable (OTP) memory.
• Bridge fault monitor
The all-analog signal path contains a 2x2 input multiplexer to allow electronic sensor
• Input MUX for lead swap
lead swapping, a coarse offset adjust, an auto-zero programmable gain instrumentation
• Over/under scale limits
amplifier, a fine gain adjust a fine offset adjust, and a programmable gain output amplifier.
• Seven banks OTP memory
• Supply voltage: +2.7V to +5.5V
• Packaging: MSOP-10, 3x4mm DFN-10 VEXC VS VREF DOUT/VCLAMP
Output VSJ
VIN1 Gain
Select
Output Scale
e
VOUT
Input Fault Auto-Zero 16-Bit Amp Limitt
Mux Monitor PGAA DAC
Ref (1)
VIN2 Fine Gain
Bridge
Sensor
3-Bit
DAC
Front-End
Gain Select
GND NOTE: (1) Ref = VREF or VS selectable.
Output Power per Channel Output Filter Design • Place decoupling capacitors and
output filters as close as possible to
• Maximum power is decided primarily • Most of TI’s Class-D amplifiers
the amplifier IC.
by power supply (output voltage and operate without a filter when speaker
current) and speaker impedance. wires are less than 10cm. • When using a ferrite bead filter place
the LC filter closest to the IC.
• Efficiency of Class-D amplifiers is • When speaker wires are long, place
typically between 80% and 90%, a second-order low-pass (LC) • Always connect the PowerPAD™
which reduces demands on the filter as close as possible to the connection to the power ground.
power supply design. amplifier’s output pins. • When the PowerPAD package
• The maximum input signal level • The filter must be designed serves as a central “star” ground for
dictates the required power amplifier specifically for the speaker amplifier systems, use only a single
gain to achieve the desired output impedance because the load point of connection for the analog
power. resistance affects the filter’s quality ground to the power ground.
factor, or “Q.”
• For best noise performance, the gain
should be as low as possible. • A ferrite bead may also eliminate
very high-frequency interference.
300 TAS5630
150 TAS5615
N
45 TAS5414A/TAS5424A (Quad)
40 TPA3106D1 (Mono) N
25 TPA3123D2 (Stereo)
TPA3100D2 (Stereo)
20
TPA3001D1 (Mono)
Output Power (W)
15 TPA3107D2 (Stereo)
N
TPA3122D2 (Stereo)
TPA3121D2/TPA3124D2 (Stereo)
12 TPA3004D2 (Stereo)
10 TPA3101D2 (Stereo)
TPA3008D2 (Stereo)
9 TPA3002D2 (Stereo)
TPA3009D2 (Stereo) N
3 TPA3003D2 (Stereo)
Vpeak
VO =
2
TPA2032/3/4D1 (Mono)
N
2.75 TPA2035D1 (Mono)
TPA2010D1 (Mono)
2.5
N
TPA2031D1 (Mono)
N
1.7 TPA2016D2 (Stereo)
N
1.5 TPA2014D1 (Mono)
N
TAS5705 TAS5706
N N
TAS5701 TAS5704
PurePath™
130
PWM-Input Class-D Power Stages
TAS5132 TAS5342/L
(30W) (100W)
TAS5122 TAS5112A TAS5111A
N (30W) (50W) (70W)
105 TAS5631
TAS5103 TAS5102 TAS5186A TAS5616
(30W Total) (40W Total) (210W Total) (150W) (300W)
Key
Mono
N Stereo
100
TAS5601/2 Multichannel
(40W) Pin-for-Pin
Compatible(DDV)
3 TPA6030A4 (Stereo)
2 TPA6021A4 (Stereo)
Output Power (W)
TPA6011A4 (Stereo)
TPA6010A4 (Stereo)
TPA6017A2 (Stereo)
TPA0172 (Stereo)
TPA02x2 (Stereo)
TPA02x3, TPA0211 (Mono)
1 TPA0253 (Mono)
2.5 4 4.5 5.5 7 9.5 10 15 18
Supply Voltage (V)
Audio Amplifiers
➔
Microphone Preamplifiers
Gain Range Noise (EIN), Half Power THD+N Power Supply
Device Description (dB) G = 30dB at 1kHz (%) (V) Package Price*
PGA2500 Digitally Controlled, Fully Differential, High Performance, Low Noise 0dB, and 10dB to –128dBu 0.0004 ±5 SSOP-28 $9.95
Wide Dynamic Range, On-Chip DC Servo Loop 65dB in 1dB steps
Slew Rate GBW Half Power THD+N Power Supply
Device Description (V/µs) (MHz) at 1kHz (%) (V) Package(s) Price*
INA163 Mono, Low Noise, Low Distortion, Current Feedback, Wide 15 8 0.0003 ±4.5 to ±18 SO-14 $2.90
Bandwidth, Wide Range of Gain
INA217 Mono, Low Noise, Low Distortion, Current Feedback, Wide 15 8 0.004 ±4.5 to ±18 PDIP-8, $2.50
Bandwidth, Wide Range of Gain SOIC-16
*Suggested resale price in U.S. dollars in quantities of 1,000.
Key Features The OPA454 is a next-generation OPA445 with high voltage of up to 100V and
• Single or dual supply: ±4V (8V) to relatively high current drive up to 25mA. It is unity-gain stable and has a gain
±50V (100V) bandwidth of 2.5MHz.
• Excellent output voltage swing:
It is internally protected against over-temperature and over-current conditions
1V to rails
and includes a thermal warning flag. Other features are its excellent accuracy and
• Enable/Disable pin
wide output swing that can reach 1V to the supply rails. The output can also be
• Thermal warning flag and internal
independently disabled using the Enable/Disable pin.
protection
• Low quiescent current: 5mA (max) Packaged in a small, exposed metal pad package, the OPA454 is easy to heat sink
• Offset voltage: 4mV with 1.6µV/°C drift over the specified extended industrial temperature range, –40°C to +85°C.
• Packaging: SO-8, HSOP-20 PowerPAD™
–12V
Key Features The OPA564 is a high-current operational amplifier ideal for driving up to
• Single or dual supply: ±3.5V (7V) to 1.5A in reactive loads and provides high reliability in demanding power-line
±13V (26V) communications and motor control applications. It operates from a single or dual
• Large output swing: 22VPP at 1.5A power supply of ±3.5V (7V) to ±13V (26V). In single-supply operation, the input
(24V supply)
common-mode range extends below ground. The OPA564 is easy to heat sink
• Thermal and over-current warning
• Adjustable current limit over the specified extended industrial temperature range, –40°C to +125°C.
• Output enable/disable control
• Slew rate: 20V/µs
Thermal Current Enable
• Packaging: HSOP-20 PowerPAD™ Flag Limit Shutdown
Flag
Applications
• Power-line communications
• Valve, actuator drivers
• Synchro, servo drivers –In
• Motor drivers OPA564
• Power supply output amplifiers
+In Current
• Test equipment
RSET Limit
• Transducer excitation Set
• General-purpose linear power boosters OPA564 PowerPAD™-down pinout.
*Expected release date 1Q 2009. V–
Power Amplifiers Selection Guide
IOUT VS Bandwidth Slew Rate IQ VOS VOS Drift IB
Device (A) (V) (MHz) (V/µs) (mA) (max) (mV) (max) (µV/°C) (max) (nA) (max) Package(s) Price*
OPA445 0.015 20 to 90 2 15 4.7 5 10 0.1 DIP-8, SO-8, SO-8 PowerPAD™ $4.75
OPA452 0.05 20 to 80 1.8 7.2 6.5 3 5 0.1 TO220-7, DDPak-7 $2.55
OPA453 0.05 20 to 80 7.5 23 6.5 3 5 0.1 TO220-7, DDPak-7 $2.55
OPA454 0.025 10 to 100 2.5 13 4 4 10 0.1 SO-8 and HSOP-20 PowerPAD $2.75
OPA541 10 20 to 70 1.6 10 25 10 40 0.05 TO220-11, TO3-8 $11.10
OPA544 2 20 to 70 1.4 8 15 5 10 0.1 TO220-5, DDPak-5 $7.90
OPA2544 2 20 to 70 1.4 8 15 5 10 0.1 TO220-11 $12.00
OPA547 0.5 8 to 60 1 6 15 5 25 500 TO220-7, DDPak-7 $5.00
OPA548 3 8 to 60 1 10 20 10 30 500 TO220-7, DDPak-7 $6.90
OPA549 8 8 to 60 0.9 9 35 5 20 500 ZIP-11, TO220-11 $12.00
OPA551 0.2 8 to 60 3 15 8.5 3 7 0.1 DIP-8, SO-8, DDPak-7 $1.90
OPA552 0.2 8 to 60 12 24 8.5 3 7 0.1 DIP-8, SO-8, DDPak-7 $1.75
OPA561 1.2 7 to 16 17 50 60 20 50 0.1 HTSSOP-20 $2.80
OPA564 1.5 7 to 28 4 20 35 20 10 0.1 HSOP-20 PowerPAD $2.75
OPA567 2 2.7 to 5.5 1.2 1.2 6 2 1.3 0.01 QFN-12 $1.85
OPA569 2 2.7 to 5.5 1.2 1.2 6 2 1.3 0.01 SO-20 PowerPAD $3.10
operation offers efficiencies as great as DRV103 low-side PWM driver block diagram.
90%, resulting in less power wasted as
heat and reduced demand on the power
supply. The DRV10x operates from +8V will also help determine the proper PWM PID controller) or from a DAC, while the
to +60V and has a single low-side or power driver solution. The maximum DRV592 accepts a PWM input signal.
high-side power switch. The devices output current required by the load should
in the DRV59x family may be analog be known. The maximum output voltage Output filter—in some applications, a low-
or digitally controlled and operate from capability of the driver may be calculated pass filter is placed between each output
0% to 100% duty cycles. The DRV59x as follows: of the PWM driver and the load to remove
operates on +2.8V to +5.5V and has VO (max) = VS – [ IO (max) • 2 • RDS(ON) ] the switching frequency components.
internal H-bridge output switches in A second-order filter consisting of an
series with the load, allowing for bi- Efficiency—a lower on-resistance (RON) inductor and capacitor is commonly used,
directional current flow from a single of the output power transistors will yield with the cut-off frequency of the filter
power supply. greater efficiency. Typically, RDS(ON) is typically chosen to be at least an order
specified per transistor. In an H-bridge of magnitude lower than the switching
Design Considerations output configuration, two output frequency. For example, a DRV593
Supply voltage—selection begins with transistors are in series with the load. To switching at 500kHz can have a 15.9kHz
the power supply voltages available in quickly estimate the efficiency, use the cut-off frequency. The component values
the system. TI’s families of PWM power following equation: are calculated using the following formula:
drivers operate from 2.8V to 5.5V for the Efficiency = RL / [ RL + ( 2 • RDS(ON) ) ] FC = 1 / [ 2 • π • (√(L • C) ) ]
DRV59x family and from 2.8V to 60V for
the DRV10x family. Analog or digital control—TI offers both The inductor value is typically chosen to
H-bridge and single-sided drivers. The be as large as possible, and is then used
Output current and output voltage—the DRV590, DRV591, DRV593 and DRV594 to calculate the required capacitor value
load to be connected to the power driver each accept a DC voltage input signal, for the desired cut-off frequency.
either from an analog control loop (i.e.,
PWM Power Drivers Selection Guide
Supply Voltage Output Current Saturation Voltage RON Frequency
Device Description (V) (A) (typ) (V) (Ω) (kHz) Package(s) Price*
Single Switch
DRV101 Low-Side with Internal Monitoring 9 to 60 2.3 1 0.8 24 TO-220, DDPAK $3.85
DRV102 High-Side with Internal Monitoring 8 to 60 2.7 2.2 0.95 24 TO-220, DDPAK $3.85
DRV103 Low-Side with Internal Monitoring 8 to 32 1.5/3 0.6 0.9 0.5 to 100 SOIC-8, SOIC-8 PowerPAD™ $2.00
DRV104 High-Side with Internal Monitoring 8 to 32 1.2 0.65 0.45 0.5 to 100 HTSSOP-14 PowerPAD $1.75
Bridge
SOIC-PowerPAD, 4x4mm
DRV590 1.2A, High-Efficiency PWM Power Driver 2.7 to 5.5 1.2 0.48 0.4 250/500 $12.00
MicroStar Junior™
DRV591 ±3A, High-Efficiency PWM Power Driver 2.8 to 5.5 3 0.195 0.065 100/500 9x9 PowerPAD QFP $11.00
DRV592 ±3A, High-Efficiency H-Bridge 2.8 to 5.5 3 0.195 0.065 1000 9x9 PowerPAD QFP $2.85
DRV593 ±3A, High-Efficiency PWM Power Driver 2.8 to 5.5 3 0.195 0.065 100/500 9x9 PowerPAD QFP $10.80
DRV594 ±3A, High-Efficiency PWM Power Driver 2.8 to 5.5 3 0.195 0.065 100/500 9x9 PowerPAD QFP $10.80
Sensor Signal Conditioning
DRV401 Signal Cond. for Magnetic Current Sensor 4.5 to 5.5 0.2 0.4 — 2000 QFN-20, SOIC-20 $2.05
*Suggested resale price in U.S. dollars in quantities of 1,000.
Temp
Key Features The XTR111 is a precision, voltage-to-current converter designed for standard
• Wide supply range: 7V to 44V 0-20mA or 4-20mA analog signals and can source up to 36mA. It is ideal for 3-wire
• Current or voltage output sensors and for the analog outputs of control systems like Programmable Logic
• Accuracy: 0.015% Controllers (PLCs). Sensor excitation and common voltage-to-current (source)
• Output error detection and disable applications will benefit from its high accuracy (0.015%).
• Adjustable 3V to 15V sub-regulator The device requires only one precision resistor to set the ratio between input
• Nonlinearity: 0.002% voltage and output current. The circuit can also be modified for voltage output.
• Offset drift: 1µV/°C Other features include an output error flag and output disable capability. The
• Low supply current: 550µA adjustable 3.0V to 15V sub-regulator output provides the supply voltage for
• Packaging: DFN-10, MSOP PowerPAD™ additional circuitry.
24V
Applications
• Universal voltage-controlled REGF
VSP OD Output Disable
Output Failure
EF
I- Mirror
current source Regulator
IS
• Current or voltage output for Out
REGS
Load
0mA to 20mA
Signal 4mA to 20mA
Input VIN
(± Load Ground)
GND SET
VVIN
RSET IOUT =(10)
RSET
IOUT = 10 • ISET
Key Features The XTR300 is a complete output driver for industrial and process control
• Pin select I or V output or input applications.The output can be selected as current or voltage by the digital I/V
• Pin select for output enable/disable (OE) select pin, error flags allow for convenient fault detection. Separate driver and
• Gain or transconductance set by receiver channels are provided for added flexibility. The integrated instrumentation
external resistors amplifier (INA) can be used for remote voltage sensing or as a high-voltage, high-
• Output voltage swing: impedance measurement channel. For additional protection, maximum output
±17.5V at VS = ±20V current limit and thermal protection is provided.
• Output current: ±24mA (linear range) VDD GND VSS
Gain
R2 G1 R1
INA G2
Logarithmic Amplifiers
➔
TI has achieved significant advance- TI log amplifiers are designed for Design Considerations
ment in log amp technology. The optical networking, photodiode signal Output scaling—amplifier output is
logarithmic amplifier is a versatile compression, analog signal compression 0.32V, 0.5V or 1.0V per decade and is the
integrated circuit that computes the and logarithmic computation for instru- equivalent of the gain setting in a voltage
logarithm of an input current relative to a mentation. Some log amps, such as the input amp.
reference current or the log of the ratio of LOG102, feature additional uncommitted
two input currents. Logarithmic amplifiers op amps for use in a variety of functions Quiescent current—lowest in LOG101 and
can compress an extremely wide input including gain scaling, inverting, filtering, LOG104.
dynamic range (up to 8 decades) into offsetting and level comparison to detect
an easily measured output voltage. loss of signal. The LOG2112 is a dual Conformity error—measured with 1nA to
Accurate matched bipolar transistors version of the LOG112 and includes 1mA input current converted to 5V output.
provide excellent logarithmic conformity two log amps, two uncommitted output More than 16-bits of dynamic range are
over a wide input current range. On-chip amps and a single shared internal voltage achievable.
compensation achieves accurate scaling reference.
over a wide operating temperature range. Auxiliary op amps—some log amps have
additional uncommitted op amps that can
be used to offset and scale the output
R1 R2 signal to suit application requirements.
VLOGOUT = (0.5V)LOG (I1/I2)
VO3 = K (0.5V)LOG (I1/I2), K = 1 + R2/R1 CC
+IN3 –IN3
LOG112 Key Features
V+ VLOGOUT
I1 • Easy-to-use complete function
Q1 Q2 • Output scaling amplifier
• On-chip 2.5V voltage reference
• High accuracy: 0.2% FSO over 5
A1 A2
I2 decades
RREF • Wide input dynamic range:
A3 VO3
7.5 decades, 100pA to 3.5mA
VREF
• Low quiescent current: 1.75mA
VREF • Wide supply range: ±4.5V to ±18V
VREF – GND VCM
GND
V–
• Packaging: SO-14 (narrow) and
SO-16
NOTE: Internal resistors are used to compensate gain change over temperature.
The VCM pin is internally connected to GND in the LOG2112.
The ACF2101 two-channel integrator Number of channels—IVC102 offers a (fs), which is usually dominated by the
offers extremely low bias current, low single integrator, while the ACF2101 is integration time. Input signals above the
noise, an extremely wide dynamic range a dual. Nyquist frequency (fs/2) create errors by
and excellent channel isolation. Included being aliased into the sampling frequency
on each of the two integrators are Integration direction—either into or out bandwidth.
precision 100pF integration capacitors, of the device. IVC102 is a bipolar input
hold and reset switches and output current integrator and will integrate both Technical Information
multiplexers. As a complete circuit positive and negative signals. ACF2101 Although these devices use relatively
on a chip, leakage current and noise is a unipolar current integrator, with the slow op amps, they may be used to
pickup errors are eliminated. An output output voltage integrating negatively. measure very fast current pulses. Photo-
capacitor can be used in addition to diode or sensor capacitance can store a
(or instead of) the internal capacitor Input bias (leakage) current—often sets pulse charge temporarily, the charge is
depending on design requirements. a lower limit to the minimum detectable then slowly integrated during the
signal input current. Leakage can be next cycle.
Design Considerations subtracted from measurements to achieve
Supply voltage—while single-supply extremely low-level current detection See the OPT101 data sheet for mono-
operation is feasible, bipolar-supply (<10fA). Circuit board leakage currents lithic photodiode and transimpedance
operation is most common and will offer can also degrade the minimum detectable amplifier. The OPT101 converts light
the best performance in terms of precision signal. directly into a voltage output, with
and dynamic range. low leakage current errors, minimal
Sampling rate and dynamic range—the noise pick-up and low gain peak-
switched integrator is a sampled system ing due to stray capacitance.
controlled by the sampling frequency
Isolation Amplifiers
➔
There are many applications where both. Common applications requiring must be protected from the very
it is desirable, even essential, that a isolation protection are those where high voltages (>7.5kV) applied by
sensor not have a direct (galvanic) sensors may accidentally encounter the defibrillator, and the technician
electrical connection with the system high voltages and the system it is handling the device must be protected
to which it is supplying data in order driving must be protected. Or a from unexpected feedback.
to avoid either dangerous voltages or sensor may need to be isolated from
currents from one half of the system accidental high voltages arising Applications for Isolation
from damaging the other half. Such downstream in order to protect its Amplifiers
a system is said to be “isolated”, and environment: examples include • Sensor is at a high potential relative
the area which passes a signal without prevention of explosive gas ignition to other circuitry (or may become so
galvanic connections is known as an caused by sparks at sensor locations under fault conditions)
“isolation barrier”. or protecting patients from electric • Sensor may not carry dangerous
shock by ECG, EEG and EMG test voltages, irrespective of faults in other
Isolation barrier protection works in and monitoring equipment. The ECG circuitry (e.g. patient monitoring and
both directions, and may be needed in application may require isolation intrinsically safe equipment for use
either half of the system, sometimes barriers in both directions: the patient with explosive gases)
• To break ground loops
Key Features The ISO7240, ISO7241 and ISO7242 are quad-channel digital isolators with
• Signaling rate options: 1, 25, 150MSPS multiple channel configurations and output enable functions. The logic input and
• Low channel-to-channel output skew: output buffers are separated by a silicon dioxide (SiO2) isolation barrier. When
1ns (max) used in conjunction with isolated power supplies, these devices block high
• Low pulse-width distortion: 2ns (max) voltage, isolate grounds and prevent noise currents from entering the local ground
• Typical 25-year life at rated working and interfering with or damaging sensitive circuitry. A periodic update pulse is sent
voltage across the barrier to ensure the output’s proper dc level.
• 4000VPEAK isolation, 560VPEAK, VIORM
• 4kV ESD protection
• Supply voltage: 3.3V or 5V
• Package: SOIC-16
1 16
Applications
• Industrial fieldbus 2 15
• Computer peripheral interface INA 14 OUTA
3
• Servo control interface
INB 4 13 OUTB
• Data acquisition
INC 5 12 OUTC
IND 6 11 OUTD
7 10
8 9
NOTE: 1The A and C option devices have TTL input thresholds and a noise-filter at the input that prevents transient pulses from being passed to the output of the device. The M option devices have CMOS
Vcc/2 input thresholds and do not have the input noise-filter or the additional propagation delay.
Amplitude (% of Fundamentals)
require an amplifier preceding the Amplifier Behavior
0.001
ADC to buffer the input signal. Most RL = 1kW
ADC
modern ADCs possess complex input Data
0.0001
during sampling and conversion. This Multiplexed data acquisition systems require excellent
behavior causes transient currents on the dynamic behavior from op amps.
0.000001
20 100 1k 10k 20k
Frequency
ADC’s input that can disturb or distort a
precision analog input signal. The input All these measures are made by applying
rate and the small signal settling period a pure sine wave (or combination of sine
amplifier serves to provide a stable,
determined primarily by the bandwidth of waves) and measuring the spectral content
accurate signal in the presence of these
the amplifier. Slewing time varies with the in the amplifier’s output that are not present
current transients. It can also provide
step size. Though generally specified for a in its input signal.
gain (or attenuation), level shifting,
specific step size, the settling time for other
filtering and other signal conditioning Technical Information
step sizes can be inferred from the slewing
functions.
portion of the step. The input amplifier is generally
Selecting the input op amp requires connected to the ADC through an
The small-signal portion of the settling
attention to many considerations. DC R-C network. Though often called a
waveform is affected by the gain of the
accuracy may narrow the possible filter, this network actually serves as a
input amplifier. If the amplifier is placed
choices of an amplifier. The amplifier “flywheel” in the presence of the current
in a higher gain, system bandwidth
must have sufficiently low offset voltage, pulses created by the ADC’s input
is reduced, proportionally increasing
offset voltage drift, input bias current, circuitry. The circuit values of this circuit
the small-signal portion of the settling
noise, and so forth, to meet the required depend on both the amplifier and the
waveform.
accuracy performance. It is often the ADC characteristics and often must be
dynamic performance characteristics, Settling Error Band optimized for a particular application.
however, that prove most troublesome in Time (% of Step)
The optimum capacitor value is generally
the selection process. The amplifier must in the range of 10 to 50 times the input
Small-signal
preserve the required dynamic signal capacitance of the ADC. The resistor is
Output Voltage
portion of
settling time
characteristics. Step Size (V)
chosen to meet the speed or bandwidth
Design Considerations V
requirement of the application.
Slewing portion
Time domain issues—some applications ms of settling time
full-scale extremes on two adjacent inputs. ADCs are used to digitize dynamic
waveforms such as audio. Rapid full-scale “Flywheel” conditioning network.
The amplifier and ADC must respond
signal steps are rarely, if ever, encountered The op amps shown in the following
to this sudden full-scale change in one
in these systems. For this reason, such table are among the most likely choices
sampling period.
systems generally specify spectral purity for the indicated conversion speeds
Settling time—an all-encompassing of the digitized signal. The amplifier must and ADC architectures. Depending
specification used to describe the ability of support this application with the required on specific application requirements,
an amplifier to respond to a large change distortion performance. Many amplifiers other amplifiers may provide improved
in input voltage. The settling time includes specify THD+N (total harmonic distortion performance. For a complete list of op
the large-signal period determined by slew + noise). Other measures are also used. amps, visit: amplifier.ti.com
Delta-sigma converters are capable wide bandwidth signal processing converter to an external event. Delta-
of very high resolution, and are ideal applications such as communications sigma converters are highly resistant
for converting signals over a very and medical imaging. to system clock jitter. The action of
wide range of frequencies from DC to oversampling effectively averages the
several megahertz. In a delta-sigma Most delta-sigma ADCs have jitter, reducing its impact on noise.
ADC, the input signal is oversampled inherently differential inputs. They
by a modulator, then filtered and measure the actual difference Many delta-sigma converters include
decimated by a digital filter producing between two voltages, instead of the input buffers and programmable
a high-resolution data stream at a difference between one voltage and gain amplifiers (PGA). An input buffer
lower sampling rate. ground. The differential input structure increases the input impedance to
of a delta-sigma makes it ideal for allow direct connection to high
The delta-sigma architecture approach measuring differential sources such as source impedance signals. A PGA
allows resolution to be traded for bridge sensors and thermocouples. increases the converter’s resolution
speed and both to be traded for Frequently, no input amplifiers are when measuring small signals. Bridge
power. This nearly continuous required for these applications. sensors are an example of a signal
relationship between data rate, source that can take advantage of the
resolution and power consumption Delta-sigma converters work differently PGA within the converter.
makes delta-sigma converters than SAR converters. A SAR takes
extraordinarily flexible. In many delta- a “snapshot” of an input voltage Every ADC requires a reference, and
sigma converters, this relationship and analyzes it to determine the for high-resolution converters, low-
is programmable, allowing a single corresponding digital code. A delta- noise, low-drift references are critical.
device to handle multiple measurement sigma measures the input signal for Most delta-sigma converters have
requirements. a certain period of time and outputs differential reference inputs.
a digital code corresponding to the
Because delta-sigma converters signal’s average over that time. It is The following pages provide a
oversample their inputs, they can important to remember the way delta- broad range of delta-sigma ADCs
perform most anti-aliasing filtering sigma converters operate, particularly available from TI for a wide range of
in the digital domain. Modern VLSI for designs incorporating multiplexing applications.
design techniques have brought the and synchronization.
cost of complex digital filters far below To help facilitate the selection process,
the cost of their analog equivalents. It is very easy to synchronize delta- an interactive online data converter
Formerly unusual functions, such as sigma converters together, so that they parametric search engine is available
simultaneous 50Hz and 60Hz notch sample at the same time but it’s more at dataconverter.ti.com with links to all
filtering, are now built into many delta- difficult to synchronize a delta-sigma data converter specifications.
sigma ADCs.
Key Features The DDC316 is a 16-bit, 16-channel, current-input ADC. It combines both current-to-
• Single-chip solution to measure 16 voltage and analog-to-digital conversion so that 16 separate low-level current output
low-level currents devices (such as photodiodes) can be directly connected to its inputs and digitized.
• Integrating I-to-V conversion front-end
• Programmable full-scale: 3pC to 12pC For each of the 16 inputs, the DDC316 provides a dual-switched integrator front-
• Adjustable speed: end. This configuration allows for continuous current integration: while one integrator
Data rate up to 100kSPS is being digitized by the on-chip ADC, the other is integrating the input current.
Integration time down to 10µs Adjustable integration times range from 10µs to 1ms.
• Analog supply: +5V VREF
AV DD DVDD
• Digital supply: +3.3V
DDC316
• Packaging: BGA-64 IN1
I to V
Applications CLK
IN2 CONV
• CT scanners I to V
Control
DIN_CFG
• DAS RESET
IN3
• Photodiode sensors I to V
DVALID
ADCs
• X-ray detection systems DIN
IN4
I to V DCLK
Serial
D OUT1
Interface
DOUT2
DOUT3
IN16
I to V DOUT4
AGND DGND
Key Features The ADS1274 (quad) and ADS1278 (octal) ADCs offer simultaneous sampling rates
• AC performance: up to 128kSPS (max) and offer a unique combination of excellent DC accuracy
Bandwidth: 62kHz and outstanding AC performance. The high-order, chopper-stabilized modulator
THD: –106dB achieves very low drift with low in-band noise. The onboard decimation filter
• DC accuracy: suppresses modulator and out-of-band noise.
Offset drift: 0.8µV/°C
Gain drift: 3ppm/°C VREFP VREFN AVDD DVDD IOVDD
• Selectable operating modes:
High speed: 128kSPS data rate Input1 DS SPI DRDY/FSYNC
High resolution: 110dB SNR and
Input2 DS SCLK
Low power: 7mW/channel ADS1274
Frame-
DOUT[8:1]
Sync
• Selectable SPI or FrameSync serial interface Input3 DS
Interface
DIN
• Modulator output option (digital filter bypass) Input4 DS Eight
• Analog supply: 5V ADS1278 Digital TEST[1:0]
Input5 DS Filters FORMAT[2:0]
• Digital supply: 1.8V to 3.3V
CLK
• Packaging: HTQFP-64 PowerPAD™ Input6 DS Control
SYNC
Logic
Applications Input7 DS PWDN[8:1]
• Vibration/modal analysis CLKDIV
Input8 DS
• Acoustics MODE[1:0]
TI’s wide bandwidth Delta-Sigma These ADCs employ a multi-stage The combination of speed and
(DS) ADCs are capable of very propriatary-modulator architecture, precision enable wide bandwidth
high resolution and are capable of which offer the advantage of inherent signal processing applications for
converting signals over a very wide stability, and higher SQNR with lower advanced scientific instrumentation for
range of frequencies from DC to oversampling ratio (OSR). Furthermore, biomedical, bench test and measure,
several megahertz. Systems using these high-speed, DS converters are and communications applications.
these ADCs benefit from high speed, highly resistant to system clock jitter.
precision performance, and wide The action of oversampling effectively
bandwidth (DC to 5MHz). averages the jitter, reducing the impact
on noise.
DVDD
AVDD
Applications
• Automated test equipment Data Ready
DGND
SAR
REF
SERIAL
Serial Interface
DCLO
CS/SH
CDAC
In a SAR ADC, the bits are decided by a single high-speed, high-accuracy comparator bit by bit, from the MSB down to the LSB.
This is done by comparing the analog input with a DAC whose output is updated by previously decided bits and successively
approximates the analog input.
SAR ADCs
➔
1MSPS
• Four individually configurable GPIOs
• Two programmable alarm levels per ch0
ch1
channel
ch2
• Package: TSSOP-30, TSSOP-38 ADC SDO
Applications
Compare
• Industrial process and control
• Battery-powered systems Alarm-Setting
Key Features The ADS8515 and ADS8519 are state-of-the-art CMOS ADCs complete with
• Input ranges: 0V to 8.192V, ±5V and sample and hold, reference, clock and a serial data interface. The devices’
±10V innovative design allows operation from a single 5V supply with power dissipation
• SNR: 90dB with 20kHz input under 100mW. Data can be output using the internal clock or synchronized to an
• INL: ±2 LSB (max) external data clock. An output synchronization pulse for ease of use with standard
• DNL: ±1 LSB, no missing codes DSPs is also provided.
• SPI-compatible serial output with
daisy-chain (TAG) feature and 3-state
bus R/C
Clock Successive Approximation Register and Control Logic CS
• Internal or external reference BYTE
BUSY
• Simple DSP interface
• Power dissipation: 100mW at 250kSPS
• Analog supply: 5V CDAC
Output
• I/O supply: 5.25V ~ 1.65V ±10V Input
7kΩ
Latches
and
Three
State
Parallel
Three
• Package: QFN-32, SSOP-28 2kΩ 25.67kΩ
Comparator
State
Drivers
Data
Bus
Applications CAP
Key Features The ADS8254, ADS8255, ADS8284 and ADS8285 are 16-/18-bit, pseudo-bipolar
• Sample rate: 1MHz, zero latency and single-ended 1MSPS SAR ADCs with onboard 4V reference, driver amplifier
at full speed and multiplexer.
• SNR: 98dB (typ) at 2kHz input C1,C2,C3, MXCLK
• THD: –121dB (typ) at 2kHz input
ch 0 +VA
• Pseudo-bipolar differential input ch 1
–
VCC
10Ω
+VA
AGND
ch 2
range: –4 to +4 with 2V common mode ch 3 OP1 Vcc
+
Voltage Clamp VEE
• Unipolar single-ended input range ch 4
ch 5 VEE +VA
• 4-channel, differential ended ch 6
ch 7 VCC +VA +IN
multiplexer with auto and manual mode 18/16 bit DO-D17 (18)
– 1MSPS L
• 8-channel, single-ended multiplexer OP2
-IN
O BUS 18/16
BYTE
VCM-I + 10s2 G
with auto and manual mode VEE
I
C
CONVST
RD
LoPWR
• Power dissipation: 270mW at 1MSPS INP V
REF
_B
and
CS
BUSY
• Internal reference and buffer INM I/0
+VBD
+VA
BDGND
• Packaging: QFN-64 VCM-O VREF/2
+VA
Applications VREF_B
+
REF IN
• Medical imaging, CT scanners VCC
–
–
REF M
• Automated test equipment BUF-REF
+ +VA
INT REFOUT
• High-speed data acquisition systems REF
Key Features The ADS8327 and ADS8328 (10.6mW at 500kHz) and the ADS8329 and ADS8330
• Excellent DC performance (ADS8329): (15.5mW at 1MHz) are low-power ADCs with unipolar input and inherent sample
INL: ±1LSB (typ) and hold. The ADS8328 and ADS8330 include a 2:1 input MUX with programmable
DNL: ±0.5LSB (typ) option of TAG bit output. All offer a high-speed, wide-voltage serial interface and
• Excellent AC performance (ADS8329):
are capable of chain mode operation when multiple converters are used.
SNR: 92dB
SFDR: 102dB
THD: –102dB
• Internal conversion clock
• Analog supply: 2.7V to 5.5V SAR
Output
Latch and SDO
• SPI/DSP-compatible serial interface ADS8328 ADS8327
3-State
Drivers
• Unipolar input range: 0V to VREF ADS8330 ADS8329
SAR ADCs
➔
ADS8403 16 1,250 1 SE, 1 PDiff Serial, SPI VREF (4.1) Ext 0.003 16 93.9 40 MSOP-10 $15.00
ADS8330 16 1,000 2 SE, 2 PDiff Serial, SPI VREF (5V at 5V, 2.5V at Ext 0.0026 16 92 15.5 TSSOP-16, $11.85
2.7V Supply) 4x4 QFN-16
ADS8472 16 1,000 1 Diff Serial, SPI ±VREF (4.2V) at VREF/2 Int/Ext 0.00098 16 94 110 6x6 QFN-28 $13.00
ADS8471 16 1,000 1 SE, 1 PDiff Serial, SPI VREF Int/Ext 0.0015 16 90 110 6x6 QFN-28 $12.50
ADS8329 16 1,000 1 SE, 1 PDiff Serial, SPI VREF (4.2V at 5V, 2.5V Ext 0.0026 16 92 20 TSSOP-16 $11.25
at 2.7V Supply)
ADS8556 16 800 1 x 6 Diff Serial, SPI/ ±2x/±4xVREF (±1V to Int/Ext 0.0046 16 90 160 LQFP-64, $16.00
P16/P8 ±12V) 9x9 QFN-64
ADS8371 16 750 1 SE, 1 PDiff P8/P16 VREF Ext 0.0022 16 87.6 130 TQFP-48 $12.00
ADS8370 16 600 1 SE, 1 PDiff Serial, SPI VREF Int/Ext 0.0015 16 90 110 6x6 QFN-28 $12.50
ADS8372 16 600 1 Diff Serial, SPI ±VREF (4.2V) at VREF/2 Int/Ext 0.0011 16 93.5 110 6x6 QFN-28 $13.00
ADS8332 16 500 8 SE, 8 PDiff Serial, SPI VREF (2.5) Int/Ext 0.0031 16 87.5 10.6 4x4 QFN-24 $15.00
ADS8331 16 500 4 SE, 4 PDiff Serial, SPI VREF (2.5) Int/Ext 0.0031 16 87.5 10.6 4x4 QFN-24 $13.50
ADS8361 16 500 2 x 2 Diff Serial, SPI ±2.5V at +2.5 Int/Ext 0.00375 14 83 150 SSOP-24 $8.75
ADS8328 16 500 2 SE, 2 PDiff Serial, SPI VREF (5V at 5V, 2.5V at Ext 0.00305 16 88.5 10.6 TSSOP-16, $9.30
2.7V Supply) 4x4 QFN-16
ADS8327 16 500 2 SE Serial, SPI VREF (4.2V at 5V, 2.5V Ext 0.00305 16 88.5 10.6 TSSOP-16 $9.30
at 2.7V Supply)
ADS8318 16 500 1 Diff Serial, SPI ±VREF (4.2V) at VREF/2 Ext 0.0015 16 96 18 MSOP-10 $9.00
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red. Preview products are listed in bold blue.
TLV1572 10 1,250 1 SE Serial, SPI VREF Ext 0.1 10 60 8.1 SOIC-8 $3.30
ADS7885 8 3,000 1 SE Serial, SPI VDD (2.7V to 5.5V) Ext (VDD) 0.156 8 49.8 15 SOT23-6 $0.95
ADS7888 8 1,250 1 SE Serial, SPI VDD (2.35V to 5.25V) Ext (VDD) 0.2 8 49.5 8 SOT23-6, SC-70 $0.85
SOIC-24,
TLV571 8 1,250 1 SE P8 VREF Ext 0.5 8 49 12 TSSOP-24 $2.35
ADS7961 8 1,000 16 SE Serial, SPI VREF (2.5V) Ext 0.112 8 49 12.5 TSSOP-38 $2.45
ADS7960 8 1,000 12 SE Serial, SPI VREF (2.5V) Ext 0.112 8 49 12.5 TSSOP-38 $2.05
ADS7959 8 1,000 8 SE Serial, SPI VREF (2.5V) Ext 0.112 8 49 12.5 TSSOP-30 $1.65
ADS7958 8 1,000 4 SE Serial, SPI VREF (2.5V) Ext 0.112 8 49 12.5 TSSOP-30 $1.25
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
ADS7817 12 200 1 Diff Serial, SPI ±VREF at +VREF Ext 0.024 12 71 2.3 SOIC-8, VSSOP-8 $1.95
ADS7829 12 125 1 PDiff Serial, SPI VREF Ext 0.018 12 71 0.6 QFN-8 $1.50
AMC7820 12 100 8 SE DAS Serial, SPI VREF (5.0) Int/Ext 0.024 12 72 (typ) 40 TQFP-48 $3.75
CDIP, PDIP, PLCC,
TLC2543 12 66 11 SE Serial, SPI VREF Ext 0.024 12 — 5 SOIC, SSOP-20 $4.45
PDIP-20, SOIC-20,
TLV2543 12 66 11 SE Serial, SPI VREF Ext 0.024 12 — 3.3 SSOP-20 $4.45
ADS7828 12 50 8 SE/4 Diff Serial, I2C VREF Int/Ext 0.024 12 71 0.675 TSSOP-16 $3.35
PGA (1, 2, 4, 8, 10,
ADS7870 12 50 8 SE Serial, SPI Int 0.06 12 72 4.6 SSOP-28 $4.15
16, 20)
ADS7823 12 50 1 SE Serial, I2C VREF Ext 0.024 12 71 0.75 VSSOP-8 $2.85
ADS1286 12 37 1 PDiff Serial, SPI VREF Ext 0.024 12 72 1 PDIP-8, SOIC-8 $2.80
TLC1518 10 400 8 SE/7 Diff Serial, SPI +5.5 (VREF = VDD) Int/Ext 0.012 10 60 10 SOIC-20, TSSOP-20 $3.45
TLC1514 10 400 4 SE/3 Diff Serial, SPI +5.5 (VREF = VDD) Int/Ext 0.012 10 60 10 SOIC-16, TSSOP-16 $2.90
TLV1508 10 200 8 SE Serial, SPI +2, 4 Int/Ext 0.05 10 60 3.3 SOIC-20, TSSOP-20 $3.15
TLV1504 10 200 4 SE Serial, SPI +2, 4 Int/Ext 0.05 10 60 3.3 SOIC-16, TSSOP-16 $2.65
ADS7867 10 200 1SE, 1 PDiff Serial, SPI VDD (1.2V to 3.6V) Ext 0.05 10 61 0.25 SOT23-6 $1.40
ADS7826 10 200 1 PDiff Serial, SPI VREF Ext 0.0048 10 62 0.6 QFN-8 $1.25
TLC1550 10 164 1 SE P10 VREF Ext 0.05 10 — 10 PLCC-28, SOIC-24 $3.90
TLC1551 10 164 1 SE P10 VREF Ext 0.1 10 — 10 PLCC-28, SOIC-24 $3.35
TLV1548 10 85 8 SE Serial, SPI VREF Ext 0.1 10 — 1.05 CDIP, LCCC, SSOP-20 $2.30
TLV1544 10 85 4 SE Serial, SPI VREF Ext 0.1 10 — 1.05 SOIC-16, TSSOP-16 $1.95
TLC1542 10 38 11 SE Serial, SPI VREF Ext 0.05 10 — 4 CDIP, LCCC, PDIP, $2.50
PLCC, SOIC-20
TLC1543 10 38 11 SE Serial, SPI VREF Ext 0.1 10 — 4 PLCC/SOIC/SSOP-20 $1.90
TLV1543 10 38 11 SE Serial, SPI VREF Ext 0.1 10 — 2.64 CDIP, LCCC, PDIP, $2.15
PLCC, SOIC, SSOP-20
TLC1549 10 38 1 SE Serial, SPI VREF Ext 0.1 10 — 4 PDIP-8, SOIC-8 $1.71
TLC1541 10 32 11 SE Serial, SPI VREF Ext 0.1 10 — 6 PDIP, PLCC, SOIC-20 $3.20
TLC0820A 8 392 1 SE P8 VREF Ext 0.2 8 — 37.5 PLCC, SOIC, SSOP-20 $1.90
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
TLV0838 8 37.9 8 S/4 Diff Serial, SPI VREF Ext 0.2 8 — 0.66 PDIP, SOIC, $1.45
TSSOP-20
TLC0831 8 31 1 Diff Serial, SPI VREF Ext 0.2 8 — 3 PDIP-8, SOIC-8 $1.40
TLC542 8 25 11 SE Serial, SPI VREF Ext 0.2 8 — 6 PDIP, PLCC, SOIC- $1.50
20
TLC0832 8 22 2 SE/1 Diff Serial, SPI VREF Ext 0.2 8 — 12.5 PDIP-8, SOIC-8 $1.40
TLC0838 8 20 8 SE/4 Diff Serial, SPI VREF Ext 0.2 8 — 3 PDIP, SOIC, $1.45
TSSOP-20
TLC0834 8 20 4 SE/2 Diff Serial, SPI VREF Ext 0.2 8 — 3 PDIP-14, SOIC-14 $1.45
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
Pipeline ADCs
➔
Analog-to-digital converters featuring pipeline structure is highly repetitive are typically recommended. This will also
sampling rates of 10s of MSPS where each of the pipeline stages ensure stability and fast settling of the
are likely based on the pipeline consists of a sample-and-hold (S/H), driving amplifier.
architecture. The pipelined ADC a low-resolution ADC and DAC, and
consists of N cascaded stages. The a summing circuit that includes an To select an appropriate interface
concurrent operation of all pipeline interstage amplifier to provide gain. circuit configuration, it is important
stages makes this architecture suitable to determine whether the application
for achieving very high conversion The analog signal is sampled with is time domain in nature (e.g.
rates. The stages themselves are the first S/H circuit, which may also CCD-based imaging system) or a
essentially identical, lined up in an facilitate a single-ended to differential frequency domain application (e.g.
assembly line fashion and designed conversion. This S/H is one of the communication system). Time domain
to convert only a portion of the most critical blocks as it typically sets applications usually have an input
analog sample. The digital output of the performance limits of the converter. frequency bandwidth that includes DC.
each stage is combined to produce As the captured sample passes Frequency domain applications, on the
the parallel data output bits. A new through the pipeline, the conversion is other hand, are typically ac-coupled.
digitized sample becomes available iterated by the stages that refine the The key converter specifications
with every clock cycle. The internal conversion with increasing resolution here are SFDR, SNR, aperture jitter
combination process itself requires as they pass the remainder signal from and analog input bandwidth; the last
a digital delay, which is commonly stage to stage. Each stage performs two specifications particularly apply
referred to as the pipeline delay, or an analog-to-digital conversion, and to undersampling applications. The
data latency. For most applications a back-conversion to analog. The optimum interface configuration will
this is not a limitation since the delay, difference between the D/A output depend on whether the application
expressed in number of clock cycles, is and the held input is the residue that calls for wide dynamic range (SFDR),
a constant and can be accounted for. is amplified and sent to the next stage or low noise (SNR), or both.
where this process is repeated.
One of the key architectural features Critical to the performance of high-
of pipeline ADCs that allows high In order to properly design the interface speed ADCs is the clock signal, since
dynamic performances at high circuit to the pipeline ADC, its switched- a variety of internal timing signals are
signal frequencies is the differential capacitor input structure needs to be derived from this clock. Pipeline ADCs
signal input. The differential input considered. The input impedance of the may use both the rising and falling clock
configuration results in the optimum pipeline converter represents a capacitive edge to trigger internal functions. For
dynamic range since it leads to smaller load to the driving source. Furthermore, example, sampling occurs on the rising
signal amplitude and a reduction it is dynamic since it is a function of edge prompting this edge to have very
in even-order harmonics. Almost the sampling rate (1/fs). The internal low jitter. Clock jitter leads to aperture
all high-speed pipeline ADCs use a switches generate small transient current jitter, which can be the ultimate limitation
single-supply voltage, ranging from pulses that may affect the settling in achieving good SNR performance.
+5V down to +1.8V. Therefore, most behavior of the source. To reduce the Particularly in undersampling
require the analog input to operate effects of this switched-capacitor, input applications, special consideration
with a common-mode voltage, which series resistors and a shunt capacitor should be given to clock jitter.
typically is at the mid-supply level.
This common-mode or input bias Gain = 2
Sample/Hold V1 + _
requirement comes into consideration
when defining the input interface Cs + V0
Key Features The ADS528x is a family of high-performance, low-power octal ADCs with
(ADCLK)
• 12-bit, 50MSPS (ADS5281) 12-bit, serialized low-voltage differential signaling (LVDS) outputs and a wide variety
CLKP
LVDD
65MSPS (ADS5282) of programmable features, allowing customization for various applications. For
• Power dissipation: information on how to interface TI’s ADCs to Xilinx® field-programmable gate
64mW/channel at 50MSPS arrays (FPGAs), go to www.xilinx.com and down load application note, XAPP774. Clock
Butte
77mW/channel at 65MSPS
(ADCLK)
• SNR: 70dBFS at 10MHz IF
(AVSS)
AVDD
(3.3V)
(1.8V)
LVDD
CLKN
CLKP
• Analog input full-scale range: 2Vpp LVDD
Test Patterns
Output Format
Drive Current
(0dB to 12dB)
Digital Gain
• Medical imaging
• Wireless base-station infrastructure Power-
PD
SCLK
SDATA
INT/EXT
VCM
CS
RESET
Refere
INT/EXT
12-/14-Bit, 400/500MSPS ADCs with LVDS-Compatible Outputs
ADS5463, ADS5474
Get samples, datasheets, evaluation modules and app reports at: www.ti.com/sc/device/ADS5463; www.ti.com/sc/device/ADS5474
Key Features
The ADS5463 (12-bit, 500MSPS) and ADS5474 (14-bit, 400MSPS) are high-speed,
• ADS5463: 12-bit, 500MSPS, 10.4 ENOB
high-performance ADCs that operate from 5V and 3.3V supplies and provide
• ADS5474: 14-Bit, 400MSPS, 11.2 ENOB
LVDS-compatible digital outputs. The devices are complete with on-chip analog
• Input bandwidth: 2.3GHz
buffer and track and hold. An internal reference generator is provided to simplify
• SFDR: 75dBc at 450MHz and 500MSPS
system design.
• SNR: 64.6dBFS at 450MHz and
500MSPS
• Differential input voltage: 2.2Vpp A1 TH1 TH2 ∑ A2 TH3 ∑ A3 ADC3
Applications 5 5 5
Pipeline ADCs
➔
Features Applications
DRGND
DRVDD
AGND
AVDD
• Sample rates: 65, 80, 105, 125MSPS • Wireless communications
• Resolution: 14-bits, no missing codes infrastructure Digital Processing DA0
Block DA1
• Selectable parallel CMOS or DDR • Software-defined radio Channel A
DA2
DA3
DA4
Output DA5
LVDS outputs • Power amplifier linearization
INA_P
INA_M
SHA 14-Bit ADC Digital
Encoder
14 Bit 14 Bit
Buffers
Channel A
DA6
DA7
DA8
DB0
• Digital processing block: • Test and measurement
DB1
DB2
DB3
DB4
Fine gain correction, in steps of • Instrumentation INB_P
SHA 14-Bit ADC Digital
Encoder
14 Bit 14 Bit Output
Buffers
DB5
DB6
DB7
INB_M Channel B DB8
0.05dB Digital Processing
Block
DB9
DB10
DB11
DB12
Decimation by 2/4/8 The ADS62P4x is a family
Channel B
DB13
VCM Reference Control Interface
Built-in and custom programmable of dual-channel, low-power CMOS Interface
RESET
SCLK
SEN
SDAATA
CTRL1
CTRL2
CTRL3
• Supports Sine, LVPECL, LVDS and 125MSPS. Using an internal
LVCMOS clocks and amplitude down sample and hold and low jitter
ADS62P functional block diagram.
to 400mVpp clock buffer, the device supports
• Packaging: QFN-64 high SNR and high SFDR at high
input frequencies. Coarse and fine gain options can be used to improve SFDR
performance at lower full-scale input ranges. Pre-defined and user programmable
decimation filters are also included.
D10_11_P
• Test and measurement instrumentation VCM
Reference
D10_11_M
D12_13_P
• Software-defined radio REF
D12_13_M
• Radar systems
Pipeline ADCs
➔
Precision DACs
➔
ROFFSET
RFB2
Buffer R/4
RFB1
+ 10V Internal R/2 R/2 R/4
Reference
SJ
R
VOUT
2R 2R 2R 2R 2R 2R 2R 2R 2R
R/4
VREF
AGND
VREF
Output
Buffer
DAC
VOUT
Latch
DATA
Control
CLOCK/WE and
Interface
CS
Buffer
Key Features The DAC8881 and DAC9881 are 16-bit and 18-bit single-channel DACs with low-
• Relative accuracy: ±0.5 LSB (DAC8881) power operation, a flexible SPI serial interface, excellent linearity and fast settling
• Full monotonicity over temperature time. The on-chip precision output amplifier allows rail-to-rail output swing over
range the full 2.7V to 5.5V supply range. The devices require an external reference. A
• Low noise: 24nV/√Hz power-on reset circuit is incorporated to ensure the DAC output powers up at
• Fast settling: 5µs zero-scale or midscale and remains there until a valid write command.
• On-chip output buffer amp with rail-to-
DVDD IOVDD AVDD VREFH-S VREFH-F
rail operation DGND AGND
• Packaging: QFN-24
Shift Register
SPI Interface
SDI PDN
CS
Applications
SCLK VOUT
• Industrial and process control Input DAC
DAC
Register Latch R(1)
• Data acquisition systems R FB
RFB
• Automatic test equipment SDOSEL Serial Out
• Communications SDO Control NOTE: (1) R = 5kΩ for Gain = 1,
• Optical networking R = 10kΩ for Gain = 2.
Applications
Data Buffer DAC 16-Bit
• Portable instruments D Register D DAC
VOUT D
Precision DACs
➔
Key Features The DAC7728, DAC8228 and DAC8728 are a families of 12-, 14- and 16-bit, octal,
• Bipolar output: ±15V, up to ±16.5V low-power DACs that provide good linearity and low glitch over the –40ºC to +105ºC
• Unipolar output: 0 to +32V temperature range. Trimmed in manufacturing, they have very low zero-code and
• Relative accuracy: ±4 LSB INL gain error. In addition, users can perform system level calibration to achieve a ±1 LSB
at 16-bits zero-code and gain error over the entire signal chain. The devices feature a standard
• Lower zero-code/gain error: high-speed 1.8V, 3V or 5V parallel 12-, 14- and 16-bit interface (up to 50MHz) to
±1 LSB (max) after user calibration communicate with DSPs or microprocessors.
±10 LSB (max) before user calibration
• Settling time: 10µs A0
IOVDD DGND DVDD AGND AV DD AVSS REF. A
DAC8728
• Programmable gain: x4, x6 A3 Ref.
VOUT-0
VMON
D0
Input Data
Reg.-0
Correction DAC-0
DATA
DAC-0
LATCH
VOUT-0
Applications /RSTSEL
Input Data Correction DAC-7
DAC-7
/LDAC VOUT-7
GPIO-0
Gain Error- 7 To DAC-4, DAC-5, DAC-6
DAC-B
Ref.
Key Features The DAC5311 (8-bit), DAC6311 (10-bit), DAC7311 (12-bit), DAC8311 (14-bit) and
• Relative accuracy: ±4 LSB INL DAC8411 (16-bit) are single-channel, low-power, voltage-output DACs with a
(DAC8411); ±1 LSB INL (DAC8311) flexible SPI serial interface with Schmitt-Triggered inputs up to 50MHz. Monotonic
• microPower operation: 80µA at 1.8V by design, they provide excellent linearity and minimize undesired code-to-code
• Power-on reset to zero scale transient voltages. The on-chip precision output amplifier allows rail-to-rail output
• Straight binary data format swing over the full 1.8V to 5.5V supply range. A power-on reset circuit ensures the
• SPI, QSPI, MICROWIRE™ and DAC powers up at 0V and remains there until a valid write occurs. The devices use
digital signal processor (DSP) an external power supply as a reference voltage to set the output range. The entire
interfaces DACx311 family comes in an ultra-small SC70 package.
• On-chip output buffer amp with rail-to- AVDD GND
rail operation Power-On
• SYNC interrupt facility Reset
Applications
• Portable, battery-powered instruments Input Control Power-Down
Register
• Process control Logic Control Logic
Netwok
• Digital gain and offset adjustment
• Programmable voltage and current
sources SYNC SCLK DN
DAC8311 functional block diagram.
or mid-scale
Data Buffer DAC 16-Bit
• Wide power-supply range: 2.7V to +5.5V H Register H DAC
• Monotonic over entire temperature range DAC8568
functional block diagram.
• Settling time: 10µs to ±0.024% Estimated release Data Buffer 16-Bit
E DAC
• Packaging: TSSOP-16, TSSOP-14 date 1Q 2009.
Applications
Data Buffer DAC 16-Bit
• Portable instrumentation D Register D DAC
• Closed-loop servo-control/
process control Data Buffer DAC 16-Bit
• Data acquisition systems A Register A DAC
SYNC
• Programmable attenuation 32-Bit Shift Buffer Register
SCLK
Register Control
• Programmable voltage and current D
Control
Control Logic
IN
Power-Down
Control Logic
sources
Precision DACs Selection Guide
Settling # of Power
Res. Time DAC Output INL Monotonic Archi- (mW)
Device (Bits) (µs) (max) Ch. Interface (V) VREF (%) (%) (Bits) tecture (typ) Package(s) Price*
Precision DACs
➔
Precision DACs
➔
DAC8568 16 10 8 Serial, SPI +VREF (+2.5) Int/Ext 0.018 16 R-String 1.8 TSSOP-16 $13.20
DAC8311 14 10 1 Serial, SPI +VDD Ext 0.024 14 R-String 0.1 SC70-6 $2.00
DAC8168 14 10 8 Serial, SPI +VREF (+2.5) Int/Ext 0.024 14 R-String 1.8 TSSOP-16, TSSOP-14 $10.20
TLV5613 12 1 1 P8 +VREF Ext 0.096 12 R-String 1.2 SOIC-20, TSSOP-20 $2.60
TLV5619 12 1 1 P12 +VREF Ext 0.096 12 R-String 4.3 SOIC-20, TSSOP-20 $2.60
TLV5633 12 1 1 P8 +VREF (+2, 4) Int/Ext 0.072 12 R-String 2.7 SOIC-20, TSSOP-20 $4.70
TLV5636 12 1 1 Serial, SPI +VREF (+2, 4) Int/Ext 0.096 12 R-String 4.5 SOIC-8, VSSOP-8 $3.65
TLV5639 12 1 1 P12 +VREF (+2, 4) Int/Ext 0.072 12 R-String 2.7 SOIC-20, TSSOP-20 $3.45
SOIC-8, CDIP-8,
TLV5638 12 1 2 Serial, SPI +VREF (+2, 4) Int/Ext 0.096 12 R-String 4.5 LCCC-20 $3.25
SOIC-20, TSSOP-20,
TLV5610 12 1 8 Serial, SPI +VREF Ext 0.146 12 R-String 18 CSP-20 $8.50
TLV5630 12 1 8 Serial, SPI +VREF Int/Ext 0.146 12 R-String 18 SOIC-20, TSSOP-20 $8.85
TLV5618A 12 2.5 2 Serial, SPI +VREF Ext 0.096 12 R-String 1.8 SOIC-8, LCCC-20 $4.75
TLV5616 12 3 1 Serial, SPI +VREF Ext 0.096 12 R-String 0.9 VSSOP-8, SOIC-8 $2.60
SOIC-16, TSSOP-16,
TLV5614 12 3 4 Serial, SPI +VREF Ext 0.096 12 R-String 3.6 CSP-16 $7.45
DAC7551 12 5 1 Serial, SPI +VREF Ext 0.024 12 R-String 0.3 SON-12 $1.40
DAC7552 12 5 2 Serial, SPI +VREF Ext 0.024 12 R-String 0.7 QFN-16 $2.35
DAC7553 12 5 2 Serial, SPI +VREF Ext 0.024 12 R-String 0.7 QFN-16 $2.35
DAC7554 12 5 4 Serial, SPI +VREF Ext 0.024 12 R-String 1.5 MSOP-10 $4.80
DAC7558 12 5 8 Serial, SPI +VREF Ext 0.024 12 String 2.7 QFN-32 $7.50
DAC7611 12 7 1 Serial, SPI 4.096 Int 0.024 12 R-2R 2.5 PDIP-8, SOIC-8 $2.55
DAC7621 12 7 1 P12 4.096 Int 0.024 12 R-2R 2.5 SSOP-20 $2.75
DAC7612 12 7 2 Serial, SPI 4.096 Int 0.024 12 R-2R 3.5 SOIC-8 $3.10
DAC7311 12 10 1 Serial, SPI +VDD Ext 0.024 12 R-String 0.2 SC70-6 $1.20
DAC7512 12 10 1 Serial, SPI +VDD Ext 0.192 12 R-String 0.3 MSOP-8, SOT23-6 $1.45
DAC7513 12 10 1 Serial, SPI +VREF Ext 0.192 12 R-String 0.3 MSOP-8, SOT23-8 $1.65
2
DAC7571 12 10 1 Serial, I C +VREF Ext 0.192 12 R-String 0.3 SOT23-6 $1.55
2
DAC7573 12 10 4 Serial, I C +VREF Ext 0.192 12 R-String 1.5 TSSOP-16 $6.15
DAC7574 12 10 4 Serial, I2C +VREF Ext 0.192 12 R-String 1.5 MSOP-10 $6.15
DAC7568 12 10 8 Serial, SPI +VREF (2.5) Int/Ext 0.024 12 R-String 1.8 TSSOP-16, TSSOP-14 $8.20
TLV5637 10 0.8 2 Serial, SPI +VREF (+2, 4) Int/Ext 0.098 10 R-String 4.2 SOIC-8 $3.20
SOIC-20, TSSOP-20,
TLV5608 10 1 8 Serial, SPI +VREF Ext 0.196 10 R-String 18 CSP-20 $4.90
*Suggested resale price in U.S. dollars in quantities of 1,000. Pricing is low-grade pricing if applicable. New products are listed in bold red. Preview products are listed in bold blue.
High-Speed DACs
➔
Modern high-speed DACs, fabricated the DAC is updated. Steering the The segmented current-steering
on submicron CMOS or BiCMOS currents from all current sources to architecture provides a significant
processes, have reached new either of the differential outputs forms reduction in circuit complexity and
performance levels with update rates a corresponding signal output current. consequently in reduced glitch
of 500MSPS and resolutions of 14- or Differential signaling is used to improve energy. This translates into an overall
even 16-bits. In order to realize such the dynamic performance while improvement of the DAC’s linearity
high update rates and resolutions, reducing the output voltage swing that and ac performance. As new system
the DACs employ a current-steering is developed across the load resistors. architectures require the synthesis of
architecture with segmented current Ideally, this signal voltage amplitude output frequencies in the 100s of MHz
sources. The core element within the should be as small as possible to range, an approach often referred to as
monolithic DAC is the current source maintain optimum linearity of the DAC. “direct IF” achieves high update rates,
array designed to deliver the full- The upper limit of this signal voltage, while maintaining excellent dynamic
scale output current, typically 20mA. and consequently the load resistance, performance.
An internal decoder addresses the is defined by the output voltage
differential current switches each time compliance specification.
VFUSE
(1.8V)
(1.8V)
(1.8V)
(1.8V)
AVDD
LPF
x2 Bypass x1 Bypass 4
• Cable modem termination systems D15P 13
IOUTA1
CM2 Mode (Modes = LP, HP, Fs/4, -Fs/4**)
(Modes=LP, HP, Fs/8, -Fs/8)
16-bit
• Test equipment x2 x2
DAC Delay (0-3)
16 16 DAC
D15N
DDR De-Interleave
CMIX1
CMIX2
FIR1 FIR2
DOP 47t 76dB HBF 47t 76dB HBF IOUTB1
x2 x2 16-bit
16 16 DAC
DON IOUTB2
Sync = ‘0->1’ 13
FIR2 Enable
FIR1 Enable
2
Delay Value
(Transition)
CM1 Mode
DACB_gain
SYNCP 2 2 4
B-Offset
XTEnable = ‘1’
SW_Sync
SYNCN Sync and Control
FIFO Sync Disable
IOVDD
SDO
(3.3V)
GND
**Note: Available on
SCLK
RESETB
SDENB
SDIO
production version
only.
Key Features The DAC5688 is a dual-channel, 16-bit, 800MSPS DAC with dual CMOS digital
• Dual, 16-bit, 800MSPS DACs data bus, integrated 2x to 8x interpolation filters, a fine frequency mixer with 32-
• Dual, 16-bit, 250MSPS CMOS input data: bit complex numerically controlled oscillator (NCO), on-board clock multiplier, IQ
16 sample input FIFO compensation and internal voltage reference. Different operational modes enable
Flexible input data bus option or bypass various signal processing blocks. The DAC5688 allows either complex
• High performance: 81dBc ACLR WCDMA
or real output. The selectable 32-bit NCO/mixer in complex mode provides
TM1 at 70MHz
frequency up-conversion and the dual DAC output produces a complex Hilbert
• 2x to 32x clock multiplying PLL/VCO
• Stop-band attenuation: >80dB Transform pair. It also offers superior linearity, noise, crosstalk and PLL phase
• Complex mixer with 32-bit NCO noise performance.
CLKVDD LPF VFUSE DVDD
• Digital quadrature modulator correction CLK2
SYNC A
• Packaging: QFN-64 TXENABLE
QMC
A-Offset
Gain
Applications IOUTA1
Quadrature Modulator
x
DA[15:0]
Correction (QMC):
16-B DAC
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red. Preview products are listed in bold blue.
Data acquisition system products from simultaneous sampling with three 12-bit of ADS1202, ADS1203, ADS1204,
TI come with a reputation for high SAR ADCs at 1MSPS with serial and ADS1205 and ADS1208. It can also be
performance and integration along with parallel interface for high-speed data used with the future AMC1203 device
the design flexibility required for a broad transfer and data processing. with built-in isolation.
range of applications such as motor
control, smart sensors for fan control, The AMC1210 is a four-channel, digital The AMC7823 is a highly-integrated
low-power monitoring and control, sync filter designed to work with our data acquisition and control device
instrumentation systems, tunable lasers family of current- shunt and Hall Effect that has eight multiplexed analog
and optical power monitoring. sensor delta-sigma modulators to inputs into a 12-bit, 200kSPS SAR
simplify the completion of the ADC ADC and eight analog voltage outputs
For motor control and three-phase function. The AMC1210 has four from the internal eight 12-bit DACs.
power control, TI offers the new individual digital filters that can be
ADS7869. The ADS7869 is a 12-channel, used independently with combinations
12-bit data acquisition system featuring
Key Features The AMC7823 is a complete analog monitoring and control circuit that includes an
• 12-bit, 200kSPS ADC 8-channel, 12-bit ADC, eight 12-bit DACs, four analog input out-of-range alarms
8 analog inputs and six GPIOs to monitor analog signals and to control external devices. Also
Input range: 0 to 2 x VREF included are an internal sensor to monitor chip temperature and a precision current
• Programmable VREF, 1.25V or 2.5V source to drive remote thermistors or RTDs to monitor remote temperatures.
• Eight 12-bit DACs (2µs settling time)
• Internal bandgap reference
• On-chip temperature sensor
• Precision current source Sync Load
(External/Internal)
• SPI interface, 3V or 5V logic compatible Range
Threshold
• Single supply: 3V to 5V
DAC 0_OUT
• Power-down mode Analog Input Signal Ground DAC-0
Out-of-Range
• Packaging: QFN-40 (6x6mm) CH0 Alarm
CH1 •
CH2 •
Applications CH3 •
CH4 MUX ADC
• Communications equipment CH5 DAC 7_OUT
• Optical networks CH6
CH7
ADC Trigger DAC-7
(External / Internal)
Channel Select
• ATE CH8
Current_Setting Resistor
CONVERT ELDAC
SCLK
SS
MOSI
MISO
RESET
DAV
GALR
GPIO-0 / ALR0
GPIO-3 / ALR3
GPIO-4
GPIO-5
AVDD
AGND
DVDD
DGND
BVDD
• Six independent 16-bit NMC SAR ADCs SAR-based ADCs with six true bipolar CONVST_A
CH_A0 S/H
Comparator
BUSY/INT
CDAC#1
• Excellent DC performance: input channels each with its own
AGND RANGE
Buffer
Control HW/SW
INL: ±1LSB (typ), ±3 LSB (max) sample-and-hold amplifier. Designed SAR Reg#1/2 Logic REF IN/WR
/STBY
CH_A1
DNL: –1/+2 LSB (max) for simultaneous, high-speed, multi- REFC_A
AGND
S/H CDAC#2
RESET
S/H CDAC#3
• Excellent AC performance at fin = 2kHz: allows data rates up to 800kSPS in AGND
Buffer
Config
Register
CH_B1
SFDR: 92dB in high-resolution mode. It features REFC_B
AGND
S/H CDAC#4 /CS
Key Features The AMC1203 is a 1-bit, 10MHz, isolated, delta-sigma (DS) modulator with an
• 16-bit resolution output buffer separated from the input interface circuitry by a silicon dioxide (SiO2)
• SNR: 80.5dB (min) isolation barrier. The modulator operates from a +5V supply with a dynamic range
• THD: –88dB (max) (AMC1203B)
of 95dB. Its differential inputs directly connect to shunt resistors or other low-level
• Input range: ±280mV with +5V supply
• Internal 2.5V reference voltage: signal sources. Used in conjunction with isolated power supplies, these devices
1% accuracy prevent noise currents on a data bus or other circuits from entering the local
• Gain error: ±1% (AMC1203B) ground and interfering with or damaging sensitive circuitry.
• UL1577, IEC60747-5-2 (VDE0884,
Isolation Barrier
Rev. 2) and IEC61010-1 approved
• Isolation: 40000VPEAK,
working voltage: 560V VIN+
+
report SLLA197)
Interface Circuit
ch B1+
ch B1– SAR
±250mV
2nd-Order MDAT
I1
4kV Isolatoin
D∑ Modulator
Logic Programmable
Circuit Sinc Filter 1
Reference
RC Oscillator MCLK
Voltage
2.5V 20MHz
ADS1204/ADS1205
0-5V
I2 2nd-Order MCLK
Programmable SPI
D∑ Modulator
Sinc Filter 2 Interface
0-5V
I3 2nd-Order Logic
Logic
D∑ Modulator Circuit
Circuit
Reference MDATB Parallel
RC Oscillator Programmable Interface
Voltage CLKOUT Sinc Filter 3
2.5V 20MHz
ADS1208
±125mV
2nd-Order
I4
D∑ Modulator
MDAT
Programmable
Logic MCLK
Sinc Filter 4
Circuit
Reference
Voltage RC Oscillator
2.5V 20MHz
Possible input modulator configuration for current measurement with AMC1210 digital filter.
Voltage References
➔
Precision Voltage and Current for portable and battery-powered Current References
References applications. These voltage references Many applications require the use of
TI’s family of voltage and current are stable with a wide range of a precision current source or current
references incorporates state-of-the- capacitive load and can sink/source sink. The REF200 combines three
art technology to offer stable, high- a minimum of up to 5mA of output circuit building-blocks on a single
precision, high-performance references current and are specified for the monolithic chip—two 100µA current
in tiny packages. temperature range of –40°C to +125°C. sources and a current mirror capable
of being used as a current source or
Series Voltage References Shunt Voltage References sink.
Series voltage references are known Shunt voltage references are precision
for excellent accuracy and stability diodes designed to offer good Integrated Op Amp and Voltage
over temperature. Typically three accuracy at extremely low power. References
terminal devices, series voltage These devices require a current source, For applications requiring an op amp
references are often used to provide typically a supply voltage and pull-up plus voltage reference or comparator
stable reference voltages for ADCs and resistor to keep forward biased. plus voltage reference, TI has an
microcontrollers. offering of integrated function voltage
The REF1112 is a 1µA, two-terminal references. The TLV3011 and TLV3012
The REF29xx, REF30xx, REF31xx, reference diode designed for high are low-power, (5µA) 6µs propagation
REF32xx and REF33xx are TI’s newest accuracy with outstanding temperature delay comparators with an integrated
available families of precision, low- characteristics at low operating shunt voltage reference.
power, low-dropout, series voltage currents. Precision thin-film resistors
references in tiny SOT23-3 packages. result in 0.2% initial voltage accuracy See pages 28-30 for comparator
Drift specifications range from and 50ppm/°C maximum temperature and integrated voltage reference
100ppm/°C to less than 10ppm/°C. drift. The REF1112 is specified from specifications
Small size and low power consumption –40°C to +85°C, with operation from
(down to 3.9µA typ) make them ideal 1µA to 5mA, and is offered in a
SOT23-3 package.
Key Features The REF33xx combines the excellent performance of a 30ppm/°C precision
• Low supply current: 3.9µA (typ) (0.15% accuracy) voltage reference with ultra-low quiescent current (5µA max)
• Low temperature drift: 30ppm/°C (max) and space-saving SC70 micro-packaging ideal for portable and battery-powered
• High output current: ±5mA applications. The REF33xx can sink and source up to 5mA and is specified over
• High accuracy: ±0.15% (max) the industrial temperature range of –40°C to +125°C.
• microSize packages: SC70-3, SOT23-3 +2.7V
R3 R2
Applications VCC
• Portable/battery powered equipment +2.7V MSP430x20x3PW
• Handheld monitoring R1
P1.2
Enable
• Data acquisition systems 66.5
A0+ 16-Bit
• Medical equipment C1 ADC
VIN
• Test equipment 1.5nF
REF3312 VREF
OPA333, C2 VSS
OPA363, 1 F
or
OPA369
Key Features The REF50xx brings a new level of precision to the TI series voltage reference
• High accuracy: 0.05% line. Offering 3ppm/°C (max) drift and 0.05% initial accuracy and very low noise,
• Low temperature drift: 3ppm/°C (max) the REF50xx is designed for industrial, medical and test applications that require
• Very low noise: 3µVPP/V performance over temperature.
• High output current: ±10mA
• Wide supply range: 2.7V to 18V
• Industrial temperature range: Model Voltage Out
–40°C to +125°C REF5020 2.048V NC 1 8 NC
• Packaging: SO-8, MSOP coming soon REF5025 2.5V VIN 2 7 NC
Applications
REF5030 3.0V SO-8
Temp 3 6 VOUT
Shunt
REF1112 µPower, 1.25V Shunt 1.25 0.2 30 60 20 0.0015 –40 to +125 0.0012 SOT23-3 $0.85
to 5
Current Reference
REF200 Dual Current Reference 100µA/Channel ±1 25 (typ) — 1nAp-p — –25 to +85 50µA to PDIP-8, $2.60
with Current Mirror 400µA SOIC-8
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
Temperature Sensors
➔
Key Features The TMP102 is a two-wire, serial-output temperature sensor available in a tiny
• Accuracy: 0.5ºC (–25ºC to +85ºC) SOT563 package. Requiring no external sensing components, the TMP102 is
• Low quiescent current: capable of reading temperatures to a resolution of 0.0625ºC. It features SMBus
10µA (max) active and two-wire interface compatibility, and allows up to four devices on one bus.
1 µA (max) shutdown It also features a dedicated alert pin.
• Supply range: 1.4V to 3.6V
• Resolution: 12-bits Temperature
• Digital output: two-wire serial interface Diode
1 Control 6
• Packaging: SOT563 SCL Temp.
Logic
SDA
Sensor
Applications
• Portable and battery power applications ∆Σ
2 Serial 5
• Power supply temperature monitoring GND A/D
Interface
V+
Converter
• Computer peripheral thermal protection
• Notebook computers
• Office machines 3
Config.
4
ALERT OSC and Temp. ADD0
• Thermostat controls Register
• Electromechanical temperature
measurements TMP102
Key Features The TMP441 and TMP442 are remote temperature sensor monitors with a
• ±1ºC remote diode sensor (max) built-in local temperature sensor. Remote accuracy is ±1ºC with no calibration
• ±1.5ºC local temp sensor (max) needed. Both devices include beta compensation (correction), series resistance
• Automatic beta compensation cancellation, programmable non-ideality factor, wide remote temperature
• Series resistance cancellation measurement range (up to +150ºC) and diode fault protection.
• n-factor correction
+5V
• 2-wire/SMBus serial interface
• Multiple interface addresses
• Packaging: SOT23-8 TMP441 TMP442
Applications
V+
• Processor/FPGA temperature monitoring
DXP DX1 SCL
• LCD/DLP®/LCOS projectors SMBus
Controller
• Servers DXN DX2 SDA
• Central office telecom equipment
• Storage area networks A1
DX3
A0
DX4
GND
Temperature Sensors
➔
I2C/SMBus Interface
2 –25 to +85
TMP100 Digital Temp Sensor –55 to +125 9 to 12 2.7 to 5.5 45 SOT23-6 $0.75
3 –55 to +125
Digital Temp Sensor with Prog. 2 –25 to +85
TMP101 –55 to +125 9 to 12 2.7 to 5.5 45 SOT23-6 $0.80
Thermostat/Alarm Function 3 –55 to +125
Ultra Low Power Digital Temp 2 –25 to 85
TMP102 –55 to 150 12 1.4 to 3.6 7 SOT563-6 $0.80
Sensor in Micro Surface Mount Pkg. 3 –40 to 125
Chipscale Digital Temp Sensor 2 –25 to +85 1mm x 1.5mm
TMP105 –55 to +127 9 to 12 2.7 to 5.5 50 $0.85
with 1.8V to 3.0V Logic 3 –40 to +125 WCSP-6
Chipscale Digital Temp Sensor 2 –25 to +85 1mm x 1.5mm
TMP106 –55 to +127 9 to 12 2.7 to 5.5 50 $0.85
with 2.7V to 5.0V Logic 3 –40 to +125 WCSP-6
Ultra-High Accuracy 0.5 +10 to +85 MSOP-8,
TMP275 –55 to +127 9 to 12 2.7 to 5.5 50 $1.25
Digital Temp Sensor 1 –40 to +125 SOIC-8
Digital Temp Sensor with 1.5 –25 to +85 MSOP-8,
TMP175 –55 to +127 9 to 12 2.7 to 5.5 50 $0.85
2-Wire Interface, 27 Addresses 2 –40 to +125 SOIC-8
Industry Standard Sensor with MSOP-8,
TMP75 2 –25 to +85 –55 to +127 9 to 12 2.7 to 5.5 50 $0.70
2-Wire Interface, 8 Addresses SOIC-8
SPI Interface
1.5˚C Accurate Digital Temp 1.5 –25 to +85
TMP121 –55 to +150 12 2.7 to 5.5 35 SOT-23-6 $0.90
Sensor with SPI Interface 2 –40 to +125
1.5˚C Accurate Programmable 1.5 –25 to +85
TMP122 –55 to +150 9 to 12 2.7 to 5.5 50 SOT-23-6 $0.99
Temp Sensor with SPI Interface 2 –40 to +125
1.5˚C Accurate Digital Temp 1.5 –25 to +85
TMP123 –55 to +150 12 2.7 to 5.5 35 SOT-23-6 $0.90
Sensor with SPI Interface 2 –55 to +125
1.5˚C Accurate Programmable 1.5 –25 to +85
TMP124 –55 to +150 9 to 12 2.7 to 5.5 50 SOIC-8 $0.70
Temp Sensor with SPI Interface 2 –40 to +125
2˚C Accurate Digital Temp. Sensor 2 –25 to +85
TMP125 –55 to +125 10 2.7 to 5.5 36 SOT23-6 $0.80
with SPI Interface 2.5 –40 to +125
Temperature Switch
Trip Point Specified Temp Operating Temp IQ
Accuracy Output Range Range Supply Voltage (µA)
Device Description (˚C) (typ) (mV/˚C) (˚C) (˚C) (V) (max) Package(s) Price*
TMP300 Comparator-Output Temperature ±2 10 –40 to +125 –40 to +150 1.8 to 18 110 SC70-6, $0.70
Switch w/Additional Analog Output SOT23-6
*Suggested resale price in U.S. dollars in quantities of 1,000.
Fan Controller
Accuracy Fan Control IQ Supply
Device Description (˚C) (typ) Input Modes Output (mA) Voltage (V) Interface Package(s) Price*
2
AMC6821 ±1˚C Remote and Local Temp ±1 1 Local and 1 Programmable, Programmable 2 (active) 2.7 to 5.5 I C/SM- SOP-16 $1.95
Sensors with Integrated Fan Remote Temp Automatic, PWM Frequency Bus 4mm x 5mm
Controller and Fixed RPM and Duty Cycle
*Suggested resale price in U.S. dollars in quantities of 1,000.
ADS1224 24 0.24 Delta-Sigma 4 SE/4 Diff — — — 0.0015 1 24 Ext Serial 2 2.7, 5.5 2.7, 5.5 0.5 $3.25
ADS1222 24 0.24 Delta-Sigma 2 SE/2Diff — — — 0.0015 1 24 Ext Serial 2 2.7, 5.25 2.7, 5.25 0.5 $2.95
ADS1234 24 0.08 Delta-Sigma 4 SE/4Diff — — — 0.0015 1 24 Ext Serial 2 2.7, 5.25 2.7, 5.25 3 $4.50
ADS1232 24 0.08 Delta-Sigma 2 SE/2Diff — — — 0.0015 1 24 Ext Serial 2 2.7, 5.25 2.7, 5.25 3 $3.90
ADS1226 24 0.08 Delta-Sigma 2 Diff — — — 0.0015 1 24 Ext Serial 2 2.7, 5.25 2.7, 5.25 1.5 $2.95
ADS1225 24 0.08 Delta-Sigma 1 Diff — — — 0.0015 1 24 Ext Serial 2 2.7, 5.25 2.7, 5.25 1.5 $2.75
ADS1241 24 0.015 Delta-Sigma 8 SE/4 Diff — — — 0.0015 1 24 Ext Serial, SPI 2 2.7, 5.25 2.7, 5.25 0.5 $4.20
ADS1243 24 0.015 Delta-Sigma 8 SE/4 Diff — — — 0.0015 1 24 Ext Serial, SPI 1 2.7, 5.25 2.7, 5.25 0.6 $3.95
ADS1240 24 0.015 Delta-Sigma 4 SE/2 Diff — — — 0.0015 1 24 Ext Serial, SPI 2 2.7, 5.25 2.7, 5.25 0.6 $3.80
ADS1242 24 0.015 Delta-Sigma 4 SE/2 Diff — — — 0.0015 1 24 Ext Serial, SPI 1 2.7, 5.25 2.7, 5.25 0.6 $3.60
ADS1244 24 0.015 Delta-Sigma 1 SE/1 Diff — — — 0.0008 1 24 Ext Serial 2 2.5, 5.25 1.8, 3.6 0.3 $2.95
ADS1245 24 0.015 Delta-Sigma 1 SE/1 Diff — — — 0.0015 1 24 Ext Serial 2 2.5, 5.25 1.8, 3.6 0.5 $3.10
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red. Preview products are listed in bold blue.
ADS8361 16 500 SAR 2 x 2 Diff 83 83 94 0.00375 1.5 14 Int/Ext Serial, SPI 2 4.75, 5.25 2.7, 5.5 150 $8.75
ADS8331 16 500 SAR 4 SE, 4 PDiff 87.5 — — 0.0031 — 16 Int/Ext Serial, SPI 2 2.7, 5.5 2.65, 5.5 6.75 $15.00
ADS8328 16 500 SAR 2 SE 88.5 91 101 0.00305 1 16 Ext Serial, SPI 2 2.7, 5.5 1.65, 5.5 10.6 $9.30
ADS8327 16 500 SAR 1 SE 88.5 91 101 0.00305 1 16 Ext Serial, SPI 2 2.7, 5.5 1.65, 5.5 10.6 $8.50
ADS8322 16 500 SAR 1 Diff 83 — 96 0.009 2 15 Int/Ext P8/P16 1 4.75, 5.25 4.75, 5.25 85 $7.10
ADS8323 16 500 SAR 1 Diff 83 — 94 0.009 2 15 Int/Ext P8/P16 1 4.75, 5.25 4.75, 5.25 85 $7.10
ADS8318 16 500 SAR 1 Diff 96 95.5 116 0.0015 0.75 16 Ext Serial, SPI 2 4.5, 5.5 2.375, 5.5 18 $9.00
ADS8319 16 500 SAR 1 SE/1 Diff 93.8 93.6 113 0.0023 1 16 Ext Serial, SPI 2 4.5, 5.5 2.375, 5.5 18 $8.00
ADS8342 16 250 SAR 4 Diff 85 87 92 0.006 2 16 Ext P8/P16 2 4.75, 5.25 2.7, 5.5 200 $11.30
ADS8365 16 250 SAR 1 x 6 Diff 87 87 94 0.006 1.5 15 Int/Ext P16 1 4.75, 5.25 4.75, 5.25 190 $16.25
ADS8364 16 250 SAR 1 x 6 Diff 82.5 83 94 0.009 3 14 Int/Ext P16 1 4.75, 5.25 4.75, 5.25 413 $18.10
ADS8326 16 250 SAR 1 SE/1 Diff 91 91 108 0.0022 1 16 Ext Serial, SPI 1 2.7, 5.25 2.7, 5.25 2.25 $5.00
ADS8519 16 250 SAR 1 SE 91 92 102 0.0022 1 16 Int/Ext Serial, SPI 2 4.75, 5.25 1.65, 5.25 100 $12.95
ADS7807 16 40 SAR 1 SE 88 88 100 0.0022 1.5 16 Int/Ext Serial, SPI/P8 1 4.75, 5.25 4.75, 5.25 28 $32.30
P8
ADS6445 14 125,000 Pipeline 4 Diff 72.3 73.2 83 0.03 0.6 14 Int/Ext Serial, LVDS 1 3.0, 3.6 3.0, 3.6 1000 $132.30
ADS5541 14 105,000 Pipeline 1 Diff — 71 82 0.127 1 14 Int P14 1 3.0, 3.6 3.3 710 $75.00
ADS5424 14 105,000 Pipeline 1 Diff 74 74 93 0.009 –0.95, 14 Int P14 1 4.25, 5.25 3.0, 3.6 1900 $56.00
1.5
ADS6144 14 105,000 Pipeline 1 Diff 73.2 74 84 0.03 0.6 14 Int/Ext DDR LVDS/CMOS, 1 3.0, 3.6 3.0, 3.6 374 $41.00
P8
ADS6244 14 105,000 Pipeline 2 Diff 72 73 81 0.03 0.6 14 Int/Ext Serial, LVDS 1 3.0, 3.6 3.0, 3.6 1000 $61.50
ADS62P44 14 105,000 Pipeline 2 Diff 73.4 73.8 86 0.03 0.7 14 Int/Ext DDR LVDS/CMOS, 1 3.0, 3.6 3.0, 3.6 700 $61.50
P8
ADS6444 14 105,000 Pipeline 4 Diff 72 73 81 0.03 0.6 14 Int/Ext Serial, LVDS 1 3.0, 3.6 3.0, 3.6 1000 $110.70
ADS5542 14 80,000 Pipeline 1 Diff — 72 85 — — 14 Int P14 1 3.0, 3.6 3.3 670 $30.00
ADS5423 14 80,000 Pipeline 1 Diff 74 74 94 0.009 –0.95, 14 Int P14 1 4.75, 5.25 3.0, 3.6 1850 $40.00
1.5
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red. Preview products are listed in bold blue.
ADS6425 12 125,000 Pipeline 4 Diff 70 70.3 83 0.043 2.5 12 Int/Ext Serial, LVDS 1 3.0, 3.6 3.0, 3.6 1650 $74.25
ADS5521 12 105,000 Pipeline 1 Diff 70 69 85 — 0.25 12 Int P12 1 3.0, 3.6 3.0, 3.6 700 $29.90
ADS6124 12 105,000 Pipeline 1 Diff 70.6 71.3 84 0.027 0.5 12 Int DDR LVDS/CMOS, 1 3.0, 3.6 3.0, 3.6 374 $23.00
P8
ADS6224 12 105,000 Pipeline 2 Diff 70 70.6 81 0.122 0.5 12 Int/Ext Serial/LVDS 1 3.0, 3.6 3.0, 3.6 900 $34.50
ADS62P24 12 105,000 Pipeline 2 Diff 70.2 71 86 0.043 0.8 12 Int/Ext DDR LVDS/CMOS, 1 3.0, 3.6 3.0, 3.6 792 $41.25
P8
ADS6424 12 105,000 Pipeline 4 Diff 70 70.6 81 0.122 0.5 12 Int/Ext Serial/LVDS 1 3.0, 3.6 3.0, 3.6 1350 $62.10
ADS5410 12 80,000 Pipeline 1SE/1 Diff 66 65 76 0.048 1 14 Int/Ext P12 2 3.0, 3.6 1.6, 2 360 $19.00
ADS809 12 80,000 Pipeline 1 SE/1 Diff 64 63 67 0.144 1.7 12 Int/Ext P12 2 4.75, 5.25 3, 5 905 $24.95
ADS6123 12 80,000 Pipeline 1 Diff 71.3 71.5 89 0.027 0.5 12 Int/Ext DDR LVDS/CMOS, 1 3.0, 3.6 3.0, 3.6 317 $16.70
P8
ADS61B23 12 80,000 Pipeline 1 Diff 69.7 70 82 0.027 0.5 12 Int/Ext DDR LVDS/CMOS, 1 3.0, 3.6 3.0, 3.6 351 $19.50
P8
ADS6223 12 80,000 Pipeline 2 Diff 70.9 70.9 87 0.11 2 12 Int/Ext Serial/LVDS 1 3.0, 3.6 3.0, 3.6 760 $25.05
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red. Preview products are listed in bold blue.
ADS7852 12 500 SAR 8 SE 70 72 74 0.024 1 12 Int/Ext P12 1 4.75, 5.25 4.75, 5.25 13 $3.40
ADS7864 12 500 SAR 3 x 2 Diff 71 71 78 0.024 1 12 Int/Ext P12 1 4.75, 5.25 4.75, 5.25 52.5 $6.65
ADS7861 12 500 SAR 2 x 2 Diff 70 71 72 0.024 1 12 Int/Ext Serial, SPI 1 4.75, 5.25 4.75, 5.25 25 $4.05
ADS7862 12 500 SAR 2 x 2 Diff 71 71 78 0.024 1 12 Int/Ext P12 1 4.75, 5.25 4.75, 5.25 25 $5.70
ADS7818 12 500 SAR 1 PDiff 70 72 78 0.024 1 12 Int Serial, SPI 1 4.75, 5.25 4.75, 5.25 11 $2.50
ADS7834 12 500 SAR 1 PDiff 70 72 78 0.024 1 12 Int Serial, SPI 1 4.75, 5.25 4.75, 5.25 11 $2.45
ADS7835 12 500 SAR 1 SE 72 72 78 0.024 1 12 Int Serial, SPI 1 4.75, 5.25 4.75, 5.25 17.5 $2.75
TLC2558 12 400 SAR 8 SE 71 — 84 0.024 1 12 Int/Ext Serial, SPI 1 4.5, 5.5 4.5, 5.5 9.5 $5.30
TLC2554 12 400 SAR 4 SE 71 — 84 0.024 1 12 Int/Ext Serial, SPI 1 4.5, 5.5 4.5, 5.5 9.5 $5.30
TLC2552 12 400 SAR 2 SE 72 — 84 0.024 1 12 Ext Serial, SPI 1 4.5, 5.5 4.5, 5.5 15 $3.95
TLC2551 12 400 SAR 1 SE 72 — 84 0.024 1 12 Ext Serial, SPI 1 4.5, 5.5 4.5, 5.5 15 $3.95
TLC2555 12 400 SAR 1 Diff 72 — 84 0.024 1 12 Int Serial, SPI 1 4.5, 5.5 4.5, 5.5 15 $3.95
ADS5517 11 200,000 Pipeline 1 Diff 66 66.9 84 0.018 0.3 11 Int/Ext DDR LVDS/CMOS, 1 3.0, 3.6 3.0, 3.6 1230 $32.95
P8
ADS5103 10 40,000 Pipeline 1 Diff 58 58 66 0.15 0.8 10 Int/Ext P10 1 1.65, 2.0 1.65, 2.0 105 $5.25
THS1030 10 30,000 Pipeline 1 SE/1 Diff 48.6 49.4 53 0.24 1 10 Int/Ext P10 2 3.0, 5.5 3.0, 5.5 150 $3.75
THS1031 10 30,000 Pipeline 1 SE/1 Diff 56 49.3 52.4 0.24 1 10 Int/Ext P10 2 3.0, 5.5 3.0, 5.5 160 $4.10
ADS820 10 20,000 Pipeline 1 SE/1 Diff 60 60 62 0.24 1 10 Int/Ext P10 1 4.75, 5.25 4.75, 5.25 200 $6.75
ADS900 10 20,000 Pipeline 1 SE/1 Diff 48 49 53 — 1 10 Int P10 1 2.7, 3.7 3.0, 3.0 49 $3.55
ADS901 10 20,000 Pipeline 1 SE/1 Diff 50 53 49 — 1 10 Ext P10 1 2.7, 3.7 3.0, 3.0 54 $3.40
THS10082 10 8,000 Pipeline 2 SE/1 Diff 59 61 65 0.1 1 10 Int/Ext P10 2 4.75, 5.25 3.0, 5.25 186 $3.70
THS1009 10 8,000 Pipeline 2 SE/1 Diff 59 61 65 0.1 1 10 Int/Ext P10 2 4.75, 5.25 4.75, 5.25 186 $3.20
THS10064 10 6,000 Pipeline 4 SE/2 Diff 59 61 65 0.1 1 10 Int/Ext P10 2 4.75, 5.25 3.0, 5.25 186 $4.15
THS1007 10 6,000 Pipeline 4 SE/2 Diff 59 61 65 0.1 1 10 Int/Ext P10 2 4.75, 5.25 4.75, 5.25 186 $3.70
ADS7884 10 3,000 SAR 1 SE 61.7 61.8 81 0.781 0.8 10 Ext Serial, SPI 1 2.7, 5.5 2.7, 5.5 15 $1.60
TLV1562 10 2,000 Pipeline 4 SE/2 Diff 58 58 70.3 0.15 1.5 10 Int/Ext P10 2 2.7, 5.5 2.7, 5.5 15 $4.15
TLC5510 8 20,000 Pipeline 1 SE — 46 42 0.39 0.75 — Ext P8 1 4.75, 5.25 4.75, 5.25 127.5 $2.35
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
TLC0831 8 31 SAR 1 Diff — — — 0.2 0.4 8 Ext Serial, SPI 1 4.5, 5.5 4.5, 5.5 3 $1.40
TLC542 8 25 SAR 11 SE — — — 0.2 0.5 8 Ext Serial, SPI 1 4.75, 5.25 4.75, 5.25 6 $1.50
TLC0832 8 22 SAR 2 SE/1 Diff — — — 0.2 0.4 8 Ext Serial, SPI 1 4.5, 5.5 4.5, 5.5 12.5 $1.40
TLC0838 8 20 SAR 8 SE/4 Diff — — — 0.2 0.4 8 Ext Serial, SPI 1 4.5, 5.5 4.5, 5.5 3 $1.45
TLC0834 8 20 SAR 4 SE/2 Diff — — — 0.2 0.4 8 Ext Serial, SPI 1 4.5, 5.5 4.5, 5.5 3 $1.45
*Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red.
DAC8555 16 10 String 4 — Ext 1 0.012 16 Serial, SPI Ext 2.75 to 5.25 1.6 $10.40
DAC8234 14 8 R-2R 4 — ±15 1 0.0061 14 Serial, SPI Ext +4.75 to 24 420 $24.90
0.0061
DAC8311 14 10 String 1 — +VDD 1 0.012 14 Serial, SPI Ext +1.8 to 5.5 0.1 $2.00
DAC8168 14 10 String 8 — +VREF 1 0.024 14 Serial, SPI Ext +2.7 to 5.5 1.8 $10.20
DAC8218 14 20 String 8 — ±16.5 1 0.006 14 Serial, SPI Ext + 4.5 to 18 165 $19.90
DAC2932 12 0.025 I-Steering 2 40 2mA 0.5 0.0488 — P12 Int/Ext +2.7 to 3.3 29 $8.35
DAC2902 12 0.03 I-Steering 2 125 20mA 2.5 0.0732 — 2 x P12 Int/Ext +3.0 to 5.25 310 $15.41
DAC902 12 0.03 I-Steering 1 165 20mA 1.75 0.061 — P12 Int/Ext +3.0 to 5.25 170 $6.25
THS5661A 12 0.035 I-Steering 1 125 20mA 2 0.0976 — P12 Int/Ext +3.0 to 5.25 175 $6.25
DAC5662A 12 0.02 I-Steering 2 275 — 2 — — Parallel Ext +3.0 to 3.6 3.30 $11.55
DAC7822 12 0.5 R-2R MDAC 2 — ±VREF (Req. OPA) 1 0.0244 12 P12 Ext 2.75 to 5.25 0.027 $3.80
DAC7811 12 0.5 R-2R MDAC 1 — ±VREF (Req. OPA) 1 0.0244 12 Serial, SPI Ext 2.75 to 5.25 0.025 $2.55
DAC7821 12 0.5 R-2R MDAC 1 — ±VREF (Req. OPA) 1 0.0244 12 P12 Ext 2.75 to 5.25 0.027 $2.60
DAC7800 12 0.8 R-2R 2 — 1mA 1 0.012 12 Serial, SPI Ext + 4.5 to 5.5 1 $13.55
DAC7801 12 0.8 R-2R 2 — 1mA 1 0.012 12 P(8+4) Ext + 4.5 to 5.5 1 $17.95
DAC7802 12 0.8 R-2R 2 — 1mA 1 0.012 12 P12 Ext + 4.5 to 5.5 1 $14.00
TLV5630 12 1 String 8 — +VREF 1 0.4 12 Serial, SPI Int/Ext + 2.7 to 5.5 18 $8.85
TLV5638 12 1 String 2 — +VREF (+2, 4) 1 0.1 12 Serial, SPI Int/Ext + 2.7 to 5.25 4.5 $3.25
TLV5638-EP 12 1 String 2 — +VREF (+2, 4) 1 0.1 12 Serial, SPI Int/Ext + 2.7 to 5.25 4.5 $9.34
TLV5638M 12 1 String 2 — +VREF (+2, 4) 1 0.1 12 Serial, SPI Int/Ext + 2.7 to 5.25 4.5 $32.50
DAC7541 12 1 R-2R MDAC 1 — ±VREF (Req. OPA) 0.5 0.012 12 P12 Ext + 5.0 to 16.0 30 $6.70
DAC8043 12 1 R-2R MDAC 1 — ±VREF (Req. OPA) 1 0.012 12 Serial, SPI Ext + 4.75 to 5.25 2.5 $3.60
TLV5613 12 1 String 1 — +VREF 1 0.1 12 P8 Ext + 2.7 to 5.5 1.2 $2.60
TLV5619 12 1 String 1 — +VREF 1 0.08 12 P12 Ext + 2.7 to 5.5 4.3 $2.60
DAC Quick Reference Selection Table
TLV5633 12 1 String 1 — +VREF (+2, 4) 0.5 0.08 12 P8 Int/Ext + 2.7 to 5.5 2.7 $4.70
*Suggested resale price in U.S. dollars in quantities of 1,000. Preview products are listed in bold blue.
DAC7615 12 10 R-2R 4 — +VREF, ±VREF 1 0.012 12 Serial, SPI Ext ± or + 4.75 to 5.25 15 $6.70
DAC7616 12 10 R-2R 4 — +VREF, ±VREF 1 0.012 12 Serial, SPI Ext + 3.0 to 3.6 2.4 $5.40
DAC7617 12 10 R-2R 4 — +VREF, ±VREF 1 0.012 12 Serial, SPI Ext + 3.0 to 3.6 2.4 $5.40
DAC7624 12 10 R-2R 4 — ±VREF 1 0.012 12 P12 Ext ± or + 4.75 to 5.25 15 $10.25
DAC7625 12 10 R-2R 4 — ±VREF 1 0.012 12 P12 Ext ± or + 4.75 to 5.25 15 $10.25
DAC7714 12 10 R-2R 4 — ±VREF 1 0.012 12 Serial, SPI Ext ± or + 14.25 to 15.75 45 $11.45
DAC7715 12 10 R-2R 4 — ±VREF 1 0.012 12 Serial, SPI Ext ± or + 14.25 to 15.75 45 $11.45
DAC7724 12 10 R-2R 4 — ±VREF 1 0.012 12 P12 Ext ± or + 14.25 to 15.75 45 $11.85
DAC7725 12 10 R-2R 4 — ±VREF 1 0.012 12 P12 Ext ± or + 14.25 to 15.75 45 $11.85
DAC7612 12 10 R-2R 2 — 4.096 1 0.012 12 Serial, SPI Int + 4.75 to 5.25 3.5 $3.10
DAC7311 12 10 String 1 — +VREF 1 0.024 12 Serial, SPI Ext + 1.8 to 5.5 0.2 $1.20
DAC7512 12 10 String 1 — +VREF 1 0.38 12 Serial, SPI Ext + 2.7 to 5.5 0.345 $1.45
DAC7513 12 10 String 1 — Ext 1 0.38 12 Serial, SPI Ext + 2.7 to 5.5 0.3 $1.65
TLV5623 8 3 String 1 — +VREF 0.2 0.2 8 Serial, SPI Ext + 2.7 to 5.5 2.1 $0.99
*Suggested resale price in U.S. dollars in quantities of 1,000. Preview products are listed in bold blue.
Audio DACs
No. of Sampling
Dynamic Inputs/ Rate Audio Power
Portable Range No. of (kHz) Data Supply
Device Description Focus (dB) Outputs (max) Format (V) Package(s) Price*
PCM1792A Stereo, Optional DSD Format, External Filter and DSP — 132 0/2 192 Standard, I2S, L +3.3 and +5 SSOP-28 $9.95
Interface, SPI/I2C, Differential Current Output: 7.8mA p-p
PCM1796/8 Stereo Advanced Segment, 123dB Dynamic Range, — 123 0/2 192 Standard, I2S, L +3.5 and +5 SSOP-28 $2.95
TDMCA Serial Interface (1798)
PCM4104 4-Channel, High Performance, Sampling Rate up to — 118 0/4 216 Normal, I2S, +3.3 and +5 TQFP-48 $4.95
216kHz, H/W or S/W Controlled TDM
PCM1738/30 Stereo Advanced Segment DAC, Soft Mute (1730), 2 — 117 0/2 192 Normal, I2S, DSD +3.3 and +5 SSOP-28 $5.25/
Optional Operation Modes (1738): Ext Filter and DSD $5.00
Decoder for SACD Playback and Digital Attenuation
PCM1791A Stereo Advanced Segment DAC, Optional DSD — 113 0/2 192 Normal, I2S, +3.3 and +5 SSOP-28 $2.10
Format, External Filter and DSP Interface, SPI/I2C TDMCA
Differential Current Output: 3.2mAp-p
PCM1793 Stereo Advanced Segment DAC, Balanced Voltage — 113 0/2 192 Normal, I2S, +3.3 and +5 SSOP-28 $2.10
Outputs, Improved Clock Jitter Left Justified
DSD1608 8-Channel, Enhanced Multiformat DS DAC, Supports — 108 0/8 192 Normal, I2S, DSD +3.3 and +5 TQFP-52 $5.96
DSD with TDMCA
PCM1780/81/82 Stereo with Volume Control, Software (1780/82) — 106 0/2 192 Normal, I2S +5 SSOP-16 $1.10
and Hardware (1781), Open-Drain Output Zero Flag
(1782), Improved Jitter Performance
PCM1753/54/55 Stereo w/Volume Control, Software (1753/55) and — 106 0/2 192 Normal, I2S +5 SSOP-16 $1.03
Hardware (1754), Open-Drain Output Zero Flag (1755)
PCM1608 8-Channel, Highly Integrated DAC, Higher SNR — 105 0/8 192 Normal, I2S +3.3 and +5 LQFP-48 $4.29
PCM1606 6-Channel, Low Cost CMOS, Multilevel — 103 0/6 192 Normal, I2S +5 SSOP-20 $2.00
PCM1680 8-Channel, Low Cost DAC, Improved Jitter — 103 0/8 192 Normal, I2S +5 SSOP-24 $1.50
Performance, Pin Compatible with PCM1780
TLV320DAC23 I2C and SPI Control with Headphone Amp, Pdiss = 23mW 4 100 0/2 96 Normal, I2S, DSP +1.5 to +3.3 VFBGA-80 $2.00
PCM1770/1 Stereo with Integrated Headphone Driver, Software 4 98 0/2 48 Normal, I2S +1.6 to +3.6 QFN-28, $1.25
(1770) and Hardware, (1771) Controlled TSSOP-16,
QFN-20
*Suggested resale price in U.S. dollars in quantities of 1,000.
Audio Codecs
Dynamic Sampling
Portable Range Rate Audio Data Power
Device Description Focus (dB) (kHz) (max) Format Supply (V) Package(s) Price*
PCM3168 High-Performance, 6 In/8 Out-Audio Codec — 112 96 Normal, I2S, 3.3 to 5 HTQFP-64 TBD
DSP, TDM
TLV320AIC34 Low-Power Quad Stereo (4-Channel) Codec, 12 Inputs 4 102 96 Normal, I2S, +2.7 to 3.6 BGA-87 $5.95
(Mic/Line), 14 Outputs (Line, Headphone/Speaker), 2 DSP, TDM
PLLs and Audio Serial Buses Allow Fully Asynchronous
Simultaneous Codec Operation
TLV320AIC3101 Low-Power Stereo Codec, Integrated PLL, 6 Inputs (Mic/ 4 102 96 Normal, +2.7 to 3.6 QFN-32 $3.55
Line), 6 Outputs (Line, Headphone/Speaker), Notch I2S, DSP, TDM
Filtering, Low-Power Analog Bypass
TLV320AIC3104 Low-Power Stereo Codec, Integrated PLL, 6 Inputs 4 102 96 Normal, +2.7 to 3.6 QFN-32 $3.25
(MicLine), 6 Outputs (Line, Headphone), Notch Filtering, I2S, DSP, TDM
Low-Power Analog Bypass
TLV320AIC3105 Low-Power Stereo Codec, Integrated PLL, 6 SE Inputs 4 102 96 Normal, +2.7 to 3.6 QFN-32 $3.25
(Mic/Line), 6 Outputs (Line, Headphone), Notch Filtering, I2S, DSP, TDM
Low-Power Analog Bypass
TLV320AIC3106 Low-Power Stereo Codec, Integrated PLL, 10 Inputs (Mic/ 4 102 96 Normal, +2.7 to 3.6 QFN-32, $3.85
Line), 7 Outputs (Line, Headphone), Notch Filtering, Low I2S, DSP, TDM BGA-80
Power Analog Bypass
TLV320AIC3107 Low-Power Stereo Codec, Integrated PLL, 10 Inputs 4 102 96 Normal, +2.7 to 3.6 QFN TBD
(Mic/Line), 7 Outputs (Line, Headphone, Mono Integrated I2S, DSP, TDM
Class-D Amp)
TLV320AIC33 Low-Power Stereo Codec, Integrated PLL, 6 Inputs, 3 Line 4 102 96 Normal, I2S, +2.7 to 3.6 QFN-48, BGA-80 $3.95
Out and Speaker/HP Outputs DSP, TDM
TLV320AIC31/32 Low-Power Stereo Codec, Integrated PLL, 6 Inputs (AIC32- 4 100 96 Normal, I2S, +2.7 to 3.6 QFN-32 $3.45
6 Single-Ended, AIC31-2 Differential and 2 Single Ended) 2 DSP, TDM
Line Out and Speaker/HP Outputs
TLV320AIC23B Low-Power, Lower Cost, Stereo Codec with 4 100 96 I2S, L, R +2.7 to 3.3 VFBGA-80, $3.00
Headphone Amps TSSOP-28,
QFN-28
TLV320AIC28/29 Low-Power, Stereo DAC, Mono ADC, Integrated PLL, 4 95 53 Normal, I2S, +2.7 to 3.6 QFN-48 $3.95/
Speaker/HP Amp, Additional Inputs and Outputs DSP $3.45
(AIC29 – Differential)
TLV320AIC26 Low-Power, Lower Cost, Stereo DAC, Mono ADC, 4 97 53 Normal, I2S, +2.7 to 3.6 QFN-32 $3.25
Integrated PLL, Speaker/HP Amp DSP
PCM3000 Stereo Audio Codec 18-Bits, Serial Interface, Software 4 98 48 Normal, I2S, +4.5 to 5.5 SSOP-28 $3.45
Controlled DSP
PCM3001 Stereo Audio Codec 18-Bits, Serial Interface, Hardware 4 98 48 Normal, I2S, +4.5 to 5.5 SSOP-28 $3.45
Controlled DSP
PCM3006 Low-Power, 3V Supply, Stereo Codec, Hardware Controlled 4 93 48 Normal +2.7 to 3.6 SSOP-24 $3.45
PCM3008 Low-Power, 2.4V Single Supply, Stereo Codec, Low-Cost, 4 88 48 Normal, I2S +2.1 to 3.6 TSSOP-16 $3.10
Hardware Controlled
PCM3793A Ultra-Low-Power Stereo Codec, 6 Inputs (Mic/Line), 3 4 93 48 Normal, I2S, +2.4 to 3.6 QFN-32 $4.50
Outputs (Line/HP/Class-D Speaker) DSP
PCM3794A Ultra-Low-Power Stereo Codec, 6 Inputs (Mic/Line), 4 93 48 Normal, I2S, +2.4 to 3.6 QFN-32 $4.25
5 Outputs (Line/HP) DSP
*Suggested resale price in U.S. dollars in quantities of 1,000. Preview products are listed in bold blue.
Voiceband Codecs
Sample Number of Analog Logic Power
Rate Input SNR Supply Supply Supply
Device Description (kHz) Channel(s) (dB) Interface (V) (V) (mW) Package Price*
TLV320AIC12K Low Power, Mono Codec, 16-Bit, 26ksps 26 1 90 I2C, S2C, 1.65 to 1.1 to 3.6 10 TSSOP-30 $1.70
Voiceband Codec with 8W Driver DSP 1.95/2.7 to 3.6
PCM3052 Stereo Codec with Integrated Mic Preamp and — 105 96 Left +3.3 and +5 3 to 3.6 228 VQFN-32 $2.60
S/PDIF Output Justified
PCM3060 Asynchronous Stereo Codec — 104 192 I2S, L, R +3.3 and +5 +2.7 to 3.6 160 TSSOP-28 $2.10
2
TLV320AIC3204 Low-Power Stereo Codec, Integrated PLL, — 100 192 I S, L, R, 1.5 to 3.6 1.26 to 3.6 5 QFN-32 $3.45
Integrated LDO, Power Tune Technology, 6 SE/3 DSP, TDM
Differential Inputs, 4 Outputs (Stereo Line Out
and Stereo HP), Effects Processing
TLV320AIC3254 Low-Power Stereo Codec, Integrated PLL, — 100 192 I2S, L, R, 1.5 to 3.6 1.26 to 3.6 5 QFN-32 $5.45
Integrated LDO, Power TuneTechnology, 6 DSP, TDM
SE/3 Differential Inputs, 4 Outputs (Stereo Line
Out and Stereo HP), Integrated miniDSP for
Enhanced Custom Audio Processing
TLV320AIC14K Low Power, Mono Codec, 16-Bit, 26ksps 26 1 90 I2C, S2C, 1.65 to 1.1 to 3.6 10 TSSOP-30 $1.50
Voiceband Codec DSP 1.95/2.7 to 3.6
TLV320AIC20K Low Power, Stereo Codec, 16-Bit, 26ksps 26 2 90 I2C, S2C, 1.65 to 1.1 to 3.6 20 TQFP-48 $2.50
Voiceband Codec with 8W Driver DSP 1.95/2.7 to 3.6
TLV320AIC24K Low Power, Stereo Codec, 16-Bit, 26ksps 26 2 90 I2C, S2C, 1.65 to 1.1 to 3.6 20 TQFP-48 $2.30
Voiceband Codec DSP 1.95/2.7 to 3.6
TINA-SPICE Module
➔
AC, DC, transient, noise, and fourier switching power supply simulation www.ti.com/analogelab
analysis are available.
Power
Supply
+ –
Customer
Sensor
VS
V CC
PRG
PRG V OUT –
RS232 V IN PGA309
+
GND 10nF
GND
SDA
SCL
EEPROM
PGA309
PC Interface Board
PGA309
Sensor Interface Board
–40˚ C < Temperature < +125 ˚ C
Temperature
Chamber Pressure
Input
MDACBufferPro MDACBufferPro
MDACBufferPro is a Multiplying Digital • Library supports most output buffer
to Analog Converter (MDAC) design options.
utility that allows the designer to • Enter desired output characteristics
enter the design parameters including • Guidance provided based on circuit
power supply voltage(s), output topology and output performance
voltage range, desired MDAC device required
and other circuit parameters resulting • Unipolar and Bipolar (four quadrant
in MDACBufferPro displaying the multiplying) options
appropriate circuit configuration. With
the entry of the designer’s tolerance for www.ti.com/analogelab
errors, the program can then select an
appropriate op amp.
Power
Supply
(Not Included)
d)
clude
(Not In
PC Interface Board ADC EVM
EVM-PDK
Use modular Evaluation Modules with our DSKs can be found on the TI
(EVMs) to prototype a complete eStore. www.ti-estore.com
data acquisition system in
minutes! If the TMS470 microcontroller is what
Imagine being able to you are using, the TMS470 System
prototype your entire Development Board was designed to
signal chain—input fit on the HPA-MCU Interface Board.
EVM
signal conditioning,
A/D conversion, Developing with Modular EVMs
processor, D/A Developing software with the modular
conversion and EVMs is easy. If you’re using a DSP,
output signal system. our free Data Converter Support
conditioning–with The signal Plug-In for Code Composer Studio™
simple building chain building blocks integrated development environment
blocks. Imagine not have the ability to easily (IDE) can help you set up the DSP to
snap into place on an interface card to interface with the data converters.
having to lay out a
connect them to most of TI’s DSPs.
printed circuit board just
to evaluate a system signal If you are developing TMS470 code
processing idea. Don’t need a DSP? TI’s ultra-low- with IAR Embedded Workbench,
power MSP430 microcontroller you can use the Jlink USB-JTAG
products and MicroSystem Controllers Debugger to download programs to
With TI’s modular EVM building blocks,
feature built-in analog functionality. the TMS470R1B1M.
you can put together a complete data
In many systems, external data
acquisition system featuring signal
conversion components may be Code Examples
conditioning, an A/D converter and a
needed to complement the built-in Code for use with the modular EVMs
processor—all in just a few minutes.
functions. For those cases, our broad on the different platforms can be found
For a more complete system you can
range of data conversion products can in the tool folder for the EVM. Look
add on from there—a D/A converter,
be used with these microcontrollers. for the Related Software section in
or more output signal conditioning.
With modular EVM boards that go Related Documents in the tool folder.
together easily, thanks to standardized Using FPGAs instead of a processor? Very often, this code is a simple project
connectors, you can quickly build a Some distributors of FPGAs have that runs on the processor used; in
complete hardware prototype and get developed interface boards that allow some cases, complete software to
to writing your application code faster. the signal chain building blocks to evaluate data converters that runs on
connect to their FPGA development your PC is included as well.
systems.
You can also build your own modules to
fit this system, to accommodate circuits The data converter support plug-in
that may not be available directly from If you just want to evaluate the device residing in TI’s Code Composer Studio
TI. Refer to the links at the end of this on the EVM using standard lab IDE makes it easier than ever to design
guide to find out how the system is equipment, or want to try wiring the with TI data converter products along
board into your existing system, the with TI’s TMS320™ digital signal
defined. For more information:
modular EVMs will allow for that as processors (DSPs).
well, no processor needed. You have
Modular EVM Design
access to all the essential interface
Guidelines at: Using the free tool in the Code
pins on the device through the Composer Studio IDE reduces the time
http://www-s.ti.com/sc/psheets/
standardized connectors. So no matter required to configure data converters by
slaa185/slaa185.pdf
how you process the data, we’ve got a up to 90 percent. The plug-in software
way to help you develop your system. module generates initialization data and
www.ti.com/analogelab
interface software for the user’s data
Ready to Get Started? converter/DSP combination using a
Start with the Processor If you’ve decided to use a DSP in
The processor is the heart of your graphical user interface, along with the
system. Do you need the power your system, an interface card may be necessary data structures. For many
of a DSP, or the features of a required to connect your DSP Starter data converter EVMs and DSP Starter
microcontroller? You’re free to choose Kit (DSK) to the modular EVMs. Refer
Kit (DSK) combinations, complete
and explore these options with the to the table at the end of this article to
software examples containing source
modular EVM system. see which interface is required for your
code and pre-coded executables to
explore these options with the modular DSK. A listing of EVMs compatible
TI’s Data Converter Plug-In (DCP) is software with a single mouse click. The evaluation modules (EVMs) from our
a free development tool that allows generated well-documented C source modular EVM system, our DSP Starter
the creation of initialization data and files contain all functions necessary to Kits (DSKs) or with your own custom
configuration software for TI data talk to the external data converter and board.
converters from within the Integrated to set up all of the registers internal to
Development Environment (IDE) of this device. The minimum function set To download your free 3.70 version of
Code Composer Studio™. It provides includes read/write functions (single the Data Converter Plug-In for Code
easy-to-use windows for “point-and- words and blocks of data), initialization Composer Studio IDE, please go to:
click” data converter configuration functions and data structures and www.ti.com/dcplug-in
from within the IDE, preventing illegal some device-specific functions like
combinations of settings. The DCP power down. New devices are added to the tool on a
dialog allows the user to select all regular basis.
the different settings for the data The generated code is to a great
converter from a single screen and to extent hardware independent, so it
automatically generate the interface can be used together with the analog
Data Converter Support Tool (DCP) for Code Composer Studio™ IDE
Supported Devices in Version 3.70
Device Description C28x™ C54x™ C55x™ C6000™ C64x™
Analog-to-Digital Converters
ADS1216 24-bit, 8-channel, 0.78kSPS, 5V 4 4 4
ADS1217 24-bit, 8-channel, 0.78kSPS, 3.3V 4 4 4
ADS1218 24-bit, 8-channel, 0.78kSPS, with flash 4 4 4
ADS1240 24-bit, 4-channel, 15SPS 4 4
ADS1241 24-bit, 8-channel, 15SPS 4 4
ADS1251 24-bit, 1-channel (diff), 20kSPS 4 4 4
ADS1252 24-bit, 1-channel (diff), 40kSPS 4 4 4
ADS1253 24-bit, 4-channel (diff), 20kSPS, 1.8-3.6V 4 4
ADS1254 24-bit, 4-channel (diff), 40kSPS, 5V 4 4
ADS1258 24-bit, 16-channel, 125kSPS, fast channel cycling 41 41 41
ADS1271 24-bit, 1-channel, 105kSPS 41
ADS1601 16-bit, 1-channel, 1.25MSPS 41 41 41
ADS1602 16-bit, 1-channel, 2.5MSPS 41 41 41
ADS1605 16-bit, 1-channel (diff), 5MSPS, 3.3V I/O, 5V analog 41 41 41
ADS1606 16-bit, 1-channel (diff), 5MSPS, 16 word FIFO 41 41 41
ADS1610 16-bit, 1-channel (diff), 10MSPS, 3.3V I/O, 5V analog 41 41 41
ADS1625 18-bit, 1-channel (diff), 1.25MSPS, 3.3V I/O, 5V analog 41 41 41
ADS1626 18-bit, 1-channel (diff), 1.25MSPS, 16 word FIFO 41 41 41
ADS7804 12-bit, 1-channel, 100kSPS, ±10V input range 4 41 41 41
ADS7805 16-bit, 1-channel, 100kSPS, ±10V input range 4 41 41 41
ADS7816 12-bit, 1-channel, 200kSPS 4 41 41 41
ADS7817 12-bit, 1-channel, 200kSPS 4 41 41 41
ADS7818 12-bit, 1-channel, 500kSPS 4 41 41 41
ADS7822 12-bit, 1-channel, 200kSPS 4 41 41 41
ADS7826 10-bit, 1-channel, 200kSPS 4 41 41 41
ADS7827 8-bit, 1-channel, 250kSPS 4 41 41 41
ADS7829 12-bit, 1-channel, 125kSPS, 2.7V microPower 4 41 41 41
ADS7841 12-bit, 4-channel, 200kSPS 41 41 41 41
ADS7861 12-bit, 2+2-channel, 500kSPS, simultaneous sampling 4 4 4 4 4
ADS7864 12-bit, 3x2-channels, 500kSPS, simultaneous sampling 41 41
ADS7881 12-bit, 1-channel, 4MSPS , internal reference 41 41 41
ADS7891 14-bit, 1-channel, 3MSPS, internal reference 41 41 41
ADS7886 12-bit, 1-channel, 1MSPS, internal reference 4 41 41 41
ADS7891 14-bit, 1-channel, 3MSPS, internal reference 41 41 41
ADS803 12-bit, 1-channel, 5MSPS 41 41 41
1
With (E)DMA support device description
TSW evaluation modules (EVMs) are system-solution evaluation tools that help reduce design cycle time by providing designers with an initial
proof of concept.
Amplifier and
ments generally can be identified by phrases such as TI or its manage-
Home Page Fax ment “believes,” “expects,” “anticipates,” “foresees,” “forecasts,” “esti-
support.ti.com International +81-3-3344-5317 mates” or other words or phrases of similar import. Similarly, such state-
ments herein that describe the company’s products, business strategy,
TI Semiconductor KnowledgeBase Home Page Domestic 0120-81-0036 outlook, objectives, plans, intentions or goals also are forward-looking
support.ti.com/sc/knowledgebase Internet statements. All such forward-looking statements are subject to certain
risks and uncertainties that could cause actual results to differ materially
International support.ti.com/sc/pic/japan.htm
Mexico Phone 0800-670-7544 Phone Important Notice: The products and services of Texas Instruments
International +91-80-41381665 Incorporated and its subsidiaries described herein are sold subject to
Fax +1(972)927-6377 Domestic Toll Free Number TI’s standard terms and conditions of sale. Customers are advised to
Internet support.ti.com/sc/pic/americas.htm Australia 1-800-999-084
obtain the most current and complete information about TI products and
services before placing orders. TI assumes no liability for applications
China 800-820-8682 assistance, customer’s applications or product designs, software
Europe, Middle East, and Africa Hong Kong 800-96-5941 performance, or infringement of patents. The publication of information
Phone India 1-800-425-7888
regarding any other company’s products or services does not constitute
TI’s approval, warranty or endorsement thereof.
European Free Call 00800-ASK-TEXAS Indonesia 001-803-8861-1006
The platform bar, PowerPAD, Difet, Excalibur, e-trim, MicroAmplifier, DaVinci,
(00800 275 83927) Korea 080-551-2804 PurePath Digital, MicroStar Junior, TMS320, FilterPro, MDACBUFFERPro, Code
International +49 (0) 8161 80 2121 Malaysia 1-800-80-3973 Composer Studio, C28x, C54x, C55x, C62x, C64x, C67x, C6000, C5000,
Ref Ref
PRSRT STD
U.S. POSTAGE
Amp ADC Processor DAC Amp
14950 F.A.A. Blvd. PAID
Fort Worth, Texas 76155 DALLAS, TEXAS
PERMIT NO.
2758
Address service requested
10110101001011010101 1011010100101101010101100100101010101101001001010101011010101001010110101
Texas Instruments
www.ti.com/amplifier
SLYB115C www.ti.com/dataconverters 1Q 2009
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Amplifiers amplifier.ti.com Audio www.ti.com/audio
Data Converters dataconverter.ti.com Automotive www.ti.com/automotive
DSP dsp.ti.com Broadband www.ti.com/broadband
Clocks and Timers www.ti.com/clocks Digital Control www.ti.com/digitalcontrol
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Military www.ti.com/military
Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork
Microcontrollers microcontroller.ti.com Security www.ti.com/security
RFID www.ti-rfid.com Telephony www.ti.com/telephony
RF/IF and ZigBee® Solutions www.ti.com/lprf Video & Imaging www.ti.com/video
Wireless www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated