This document provides instructions for drafting the front pattern for pajama pants. It lists 16 steps to trace the outline and mark points for the full length, crotch rise, hips, leg circumference, and front crotch shape. Key measurements are taken from the body and added to for seam allowances. The front pattern is then cut out along the traced lines.
This document provides instructions for drafting the front pattern for pajama pants. It lists 16 steps to trace the outline and mark points for the full length, crotch rise, hips, leg circumference, and front crotch shape. Key measurements are taken from the body and added to for seam allowances. The front pattern is then cut out along the traced lines.
This document provides instructions for drafting the front pattern for pajama pants. It lists 16 steps to trace the outline and mark points for the full length, crotch rise, hips, leg circumference, and front crotch shape. Key measurements are taken from the body and added to for seam allowances. The front pattern is then cut out along the traced lines.
Pajama Pants 1. Draw construction line by tracing the outer edge of the L- square, make corner A. 2. A – B is the full length of the pajama pants. 3. A – C is the crotch/ rise/seat measure plus 1½ inches for garter casing. 4. Square out points B – C 5. C – D is 1/4 of hips circumference plus ½ inch for allowance. 6. Square up point D to line A mark intersection as point E. 7. D – F is 1 ½ inches outward. 8. D – G is 2½. inches towards E. 9. Shape front crotch from point G to F with a French curve. 10.C – I is ½ of the leg circumferenc e plus ½ inch for allowance. 11.Connect points F and H with a straight line. 12.I is the center of line IG. 13.J is ½ inch from I inward. 14.Connect points HJ with a straight line. 15.Connect points JF with a curve rule. 16.Cut front pattern along A – B - C – I – K – G – H – and A. Cut front pattern along A,C,B,H,J,F,G,I, and A.