Professional Documents
Culture Documents
Panel Van, Cab Chassis, Dual Cab Chassis and Transfer Minibus.
March 2022 Production
Contents
Sprinter VS30 Range 03
MBUX04
Safety Features 05
Panel Van Standard Equipment 09
Panel Van Technical Data 10
Panel Van Technical Drawings 15
Cab Chassis | Dual Cab Chassis
Standard Equipment 27
Cab Chassis | Dual Cab Chassis
Technical Data 28
Cab Chassis | Dual Cab Chassis
Technical Drawings 32
Transfer Minibus Standard Equipment 37
Transfer Minibus Technical Data 38
Transfer Minibus Technical Drawings 39
Sprinter Colours and Upholstery 41
Appendix | Disclaimers 42
The and the words Mercedes-Benz are registered trademarks of Mercedes-Benz AG, Stuttgart, Germany.
Mercedes-Benz Vans Australia Pacific Pty Ltd, ACN 618 413 362. Lexia Place, Mulgrave, Victoria 3170.
Telephone: (03) 9566 9266. Facsimile: (03) 9562 6282. LMCT 11743.
Sprinter Technical Data | Model Year 2022 2
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
VS30 Range
MODELS PANEL VAN 2 SEATS CAB CHASSIS 3 SEATS DUAL CAB CHASSIS 6 SEATS TRANSFER MINIBUS 12 & 15 SEATS
Drive
Front-wheel Drive
Rear-wheel Drive Rear-wheel Drive
Rear-wheel Drive Rear-wheel Drive
All-wheel Drive (optional with 140kW Engine)* All-wheel Drive (optional with 140kW Engine)*
All-wheel Drive (optional with 140kW Engine)*
Length
Short Wheel Base (SWB)
Medium Wheel Base (MWB) Medium Wheel Base (MWB) Medium Wheel Base (MWB)
Medium Wheel Base (MWB)
Long Wheel Base (LWB) Long Wheel Base (LWB) Long Wheel Base (LWB)
Extra Long Wheel Base (ELWB)
Heights
Standard Roof, High Roof, Super High Roof Standard Roof, High Roof
GVM
3550 kg, 4100 kg, 4490 Kg, 5000 kg, 4490 kg, 5000 kg, 4490 kg, 5000 kg,
4100 kg
5500 kg (optional) 5500 kg (optional) 5500 kg (optional)
Engine
84 kW (114hp), 110 kW (150hp)
125 kW (170hp), 140 kW (190hp) 125 kW (170hp), 140 kW (190hp) 110 kW (150hp), 125 kW (170hp)
125 kW (170hp), 140 kW (190hp)
Engine Specification
OM654 84kW (114hp) at 3800 rpm | OM654 110kW (150hp) at 3800 rpm | OM654 125kW (170hp) at 3800 rpm | OM654 140kW (190hp) at 3800 rpm |
300 Nm at 1400-2400 rpm | 1950 cc | 340 Nm at 1500-2400 rpm | 1950 cc | 400 Nm at 1700-2400 rpm | 1950 cc | 450 Nm at 1400-2400 rpm | 1950 cc |
4-Cylinder Diesel Single-Turbocharged, Euro VI 4-Cylinder Diesel Single-Turbocharged, Euro VI 4-Cylinder Diesel Single-Turbocharged, Euro VI 4-Cylinder Diesel 2 Stage-Turbocharged, Euro VI
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
MBUX - the Mercedes-Benz User
Experience infotainment system (5)
MBUX technology comes with a high resolution 7-inch touchscreen fitted as standard, 7-inch (standard)
offering intuitive touch control. You can also upgrade to a 10.25-inch display with HD
resolution for additional features.
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Unique Safety Features (1)
ESP®9i (Standard)
ESP9i consists of the following features:
Electronic Brake Prefill ESP® – trailer stabilisation (TSA - Trailer Stability Assist)
If the driver's foot suddenly and rapidly moves off the accelerator, the brake This system counteracts sinusoidal oscillations of the trailer in two phases.
linings are lightly engaged to eliminate the air gap between the lining and disc. Sensors monitor the amplitude of the swinging movements. As soon as they
This makes the full braking performance available for any potential braking. detect an unstable situation, a first stabilising phase is initiated, consisting in
an asymmetrical braking intervention at the front axle, alternating on the left
EBD – Electronic Brake Force Distribution and on the right sides. If this asymmetrical braking action proves insufficient,
This system distributes the brake pressure between front and rear axle to the second phase is added to the first. In this second phase the vehicle is
stabilise the vehicle. EBD supports the anti-lock braking system in this way. slowed down by braking interventions at all four wheels and by an engine
torque reduction.
ABS – Anti-Lock Braking System
Helps to prevent the wheels from locking. ESP®– Electronic Stability Program
ESP® interfaces with both the braking system and the engine management.
ASR – Acceleration Skid Reduction It continuously monitors the signals from the steering angle sensor, wheel
Regulates wheelspin by intervening via the engine management and by braking speed sensors, lateral acceleration sensor and yaw sensor, allowing it to
the driven wheels. A deactivation switch allows engine intervention to be assist the driver if instability is detected. In critical situations, ESP® actively
switched off at lower speeds and the slip threshold to be raised. intervenes via the engine management and braking system and assists the
driver by generating braking forces to restore directional stability. When ESP®
BAS – Brake Assist System and ASR interventions are taking place, the ESP® warning light comes on in
Brake Assist identifies emergency braking situations on the basis of the speed the speedometer.
The adaptive Electronic Stability Program ESP version 9i has a better
®
with which the brake pedal is actuated and supports the driver in emergency
braking performance in the wet (Brake Disc Wipe) and a faster braking
braking by increasing the brake pressure. ELC - Easy Lane Changes
response (Electronic Brake Prefill) in an emergency than the preceding version.
Pedal feedback and noise characteristics have also improved: This system supports the driver while changing lanes, taking into account
ROM – Roll Over Mitigation the vehicle speed and load. The vehicle has a more neutral handling when
This system helps to detect rollover tendencies during manoeuvres a low changing lanes, which means the burden on the driver can be relieved,
Crosswind Assist
speed and high lateral acceleration. particularly on long trips.
Helps prevent lateral displacement in the event of gusting side winds.
RMI – Roll Movement Intervention QR Code rescue sticker
Brake Disc Wipe
This system helps to detect rollover tendencies in dynamic manoeuvres and in QR Code rescue stickers are located on both B-pillars. Scanning the QR code
In rainy conditions a slight cyclical brake pressure is built up. This wipes the
high-speed evasive manoeuvres with high lateral acceleration. with a suitable code reader on a smartphone or tablet computer with camera
film of water from the brake discs, so that full braking performance is assured
in the event of hard braking. opens up a digital rescue card. The rescue card shows important information
LAC – Load Adaptive Control
such as the location of vital vehicle components such as fuel tanks, airbags
This system helps determine the gross vehicle weight and supports the ESP
and electric cables. Such information allows fast and safe rescue and helps to
control function, depending on the vehicle load.
minimise the risks for occupants as well as for the emergency teams helping.
Mercedes-Benz is the first manufacturer in the world to equip all new vans as
EUC – Enhanced Understeer Control
standard with the rescue sticker.
This system helps to stabilise the vehicle in the event of heavy understeer.
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Active Distance Assist DISTRONIC Active Brake Assist
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Active Lane Keep Assist
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Sprinter Panel Van FWD | RWD
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Standard equipment (1,7) Panel Van (FWD | RWD)
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Data (3) FWD Panel Van | Euro VI | 3.55t
* Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any.
Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo.
Front Axle Mass Limit without A50.
Payload = GVM - Unladen mass
Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants
EU Kerb Mass = Mass of vehicle with a 75kg driver, 90% fuel and 100% of all other fluids
Tare Mass = 10 litres fuel, no occupants
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Data (3) RWD Panel Van | Euro VI | 3.55t
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Data (3) RWD Panel Van | Euro VI | 4.10t
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Data (3) RWD Panel Van | Euro VI | 4.49t
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Data (3) RWD Panel Van | Euro VI | 5.0t
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) FWD Panel Van - Short Wheelbase
Dimensions
We reserve all rights for are The
this drawing. subject to a may
drawing tolerance of up to +/- 3%.
neither
Cargo volume [m³] Turning clearance circle - curb to curb [m] 7,8 S02 driver seat12,2 T93 loading compartment sliding door deleted for homologation after configuration
the body has beenof your order.
mounted. be copied nor passed on to any third person.
Luggage area [m²] Gross vehicle weight [kg] N/A S04 adjustable3500 XZ0 seat
co-drivers model generation - Optional
- The drawing is simplified to some equipment
extent and codes
is notnot listedbinding.
legally here, KW-codes and changes resulting
Luggage volume [l] Permissable front axle load [kg] N/A 1750
T19 sliding door, left - Please check whether the fromdrawing
feasibility checks arecomplies
specification not included
with in
thethe drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Permissable
Turning clearance circle rear[m]
- curb to curb axle load [kg] 12,2 2100
T93 loading compartment sliding door deleted configuration of your -order.
Our instructions for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 3500 XZ0 model generation - Optional equipment codes whennot planning to fitKW-codes
listed here, bodies of other than Mercedes-Benz
and changes resulting manufacture.
Permissable front axle load [kg] 1750 from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2100 - Our instructions for theAllmanufacture
dimensions refer to the standard
of superstructures version
must and the base tyres.
be observed,
laden unladen In laden
when planning to fit bodies of condition
other thanall axles are fullymanufacture.
Mercedes-Benz loaded (see table).
Vehicle height [mm] 2222 2356
Minimal ground clearance [mm] 143 143 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 433 576 Base tyres: In laden condition all axles are fully loaded (see table).
A1LH1/FWD 4x2/3500
Vehicle height [mm] Driver‘s door step height [mm]2222 2356 344 410 Front axle 225/65 R16C
Side [mm]
cargo step height [mm] N/A N/A Rear axle 225/65 R16C 910631 14.12.2021
Minimal ground clearance 143 143
Panel van
Rear lift in height [mm] 433 576 Base tyres:
Driver‘s door step height [mm] 344 410 Front axle 225/65 R16C A1LH1/FWD 4x2/3500
Side cargo step height [mm] N/A N/A Rear axle 225/65 R16C 910631 14.12.2021
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) FWD Panel Van - Medium Wheelbase
Dimensions
We reserve all rights for are The
this drawing. subject to a may
drawing tolerance of up to +/- 3%.
neither
Cargo volume [m³] Turning clearance circle - curb to curb [m] 9,5 14,4 Euro
MP6 engine version T19 VI sliding door, left for homologation after configuration
the body has beenof your order.
mounted. be copied nor passed on to any third person.
Luggage area [m²] Gross vehicle weight [kg] N/A 3500 T93 loading compartment sliding door deleted
S02 driver seat - Optional
- The drawing is simplified to some equipment
extent and codes
is notnot listedbinding.
legally here, KW-codes and changes resulting
Luggage volume [l] Permissable front axle load [kg] N/A S04 adjustable1750 XZ0 seat
co-drivers model generation - Please check whether the fromdrawing
feasibility checks arecomplies
specification not included
with in
thethe drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Permissable
Turning clearance circle rear[m]
- curb to curb axle load [kg] 14,4 2100
T19 sliding door, left configuration of your -order.
Our instructions for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 3500 T93 loading compartment sliding door deleted - Optional equipment codes whennot planning to fitKW-codes
listed here, bodies of other than Mercedes-Benz
and changes resulting manufacture.
Permissable front axle load [kg] 1750 XZ0 model generation from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2100 - Our instructions for theAllmanufacture
dimensions refer to the standard
of superstructures version
must and the base tyres.
be observed,
laden unladen In laden
when planning to fit bodies of condition
other thanall axles are fullymanufacture.
Mercedes-Benz loaded (see table).
Vehicle height [mm] 2220 2351
Minimal ground clearance [mm] 143 143 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 433 569 Base tyres: In laden condition all axles are fully loaded (see table).
A2LH1/FWD 4x2/3500
Vehicle height [mm] Driver‘s door step height [mm]2220 2351 343 403 Front axle 225/65 R16C
Side [mm]
cargo step height [mm] N/A N/A Rear axle 225/65 R16C 910633 14.12.2021
Minimal ground clearance 143 143
Panel van
Rear lift in height [mm] 433 569 Base tyres:
Driver‘s door step height [mm] 343 403 Front axle 225/65 R16C A2LH1/FWD 4x2/3500
Side cargo step height [mm] N/A N/A Rear axle 225/65 R16C 910633 14.12.2021
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Panel Van - Medium Wheelbase
Dimensions
We reserve all rights for are The
this drawing. subject to a may
drawing tolerance of up to +/- 3%.
neither
Cargo volume [m³] Turning clearance circle - curb to curb [m] 9 12,4 Euro
MP6 engine version T19 VI sliding door, left for homologation after configuration
the body has beenof your order.
mounted. be copied nor passed on to any third person.
Luggage area [m²] Gross vehicle weight [kg] N/A 3500 T93 loading compartment sliding door deleted
S02 driver seat - Optional
- The drawing is simplified to some equipment
extent and codes
is notnot listedbinding.
legally here, KW-codes and changes resulting
Luggage volume [l] Permissable front axle load [kg] N/A S04 adjustable1650 XZ0 seat
co-drivers model generation - Please check whether the fromdrawing
feasibility checks arecomplies
specification not included
with in
thethe drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Permissable
Turning clearance circle rear[m]
- curb to curb axle load [kg] 12,4 2250
T19 sliding door, left configuration of your -order.
Our instructions for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 3500 T93 loading compartment sliding door deleted - Optional equipment codes whennot planning to fitKW-codes
listed here, bodies of other than Mercedes-Benz
and changes resulting manufacture.
Permissable front axle load [kg] 1650 XZ0 model generation from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2250 - Our instructions for theAllmanufacture
dimensions refer to the standard
of superstructures version
must and the base tyres.
be observed,
laden unladen In laden
when planning to fit bodies of condition
other thanall axles are fullymanufacture.
Mercedes-Benz loaded (see table).
Vehicle height [mm] 2227 2331
Minimal ground clearance [mm] 158 162 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 520 628 Base tyres: In laden condition all axles are fully loaded (see table).
A2LH1/RWD 4x2/3500
Vehicle height [mm] Driver‘s door step height [mm]2227 2331 351 406 Front axle 235/65 R16C
Side [mm]
cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907633 14.12.2021
Minimal ground clearance 158 162
Panel van
Rear lift in height [mm] 520 628 Base tyres:
Driver‘s door step height [mm] 351 406 Front axle 235/65 R16C A2LH1/RWD 4x2/3500
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907633 14.12.2021
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Panel Van - Medium Wheelbase
Dimensions
We reserve all rights for are The
this drawing. subject to a may
drawing tolerance of up to +/- 3%.
neither
Cargo volume [m³] Turning clearance circle - curb to curb [m] 9 12,4 Euro
MP6 engine version T19 VI sliding door, left for homologation after configuration
the body has beenof your order.
mounted. be copied nor passed on to any third person.
Luggage area [m²] Gross vehicle weight [kg] N/A 4100 T93 loading compartment sliding door deleted
S02 driver seat - Optional
- The drawing is simplified to some equipment
extent and codes
is notnot listedbinding.
legally here, KW-codes and changes resulting
Luggage volume [l] Permissable front axle load [kg] N/A S04 adjustable1860 XZ0 seat
co-drivers model generation - Please check whether the fromdrawing
feasibility checks arecomplies
specification not included
with in
thethe drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Permissable
Turning clearance circle rear[m]
- curb to curb axle load [kg] 12,4 2430
T19 sliding door, left configuration of your -order.
Our instructions for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 4100 T93 loading compartment sliding door deleted - Optional equipment codes whennot planning to fitKW-codes
listed here, bodies of other than Mercedes-Benz
and changes resulting manufacture.
Permissable front axle load [kg] 1860 XZ0 model generation from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2430 - Our instructions for theAllmanufacture
dimensions refer to the standard
of superstructures version
must and the base tyres.
be observed,
laden unladen In laden
when planning to fit bodies of condition
other thanall axles are fullymanufacture.
Mercedes-Benz loaded (see table).
Vehicle height [mm] 2266 2378
Minimal ground clearance [mm] 160 163 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 559 675 Base tyres: In laden condition all axles are fully loaded (see table).
A2LH1/RWD 4x2/4100
Vehicle height [mm] Driver‘s door step height [mm]2266 2378 375 446 Front axle 235/65 R16C
Side [mm]
cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907643 14.12.2021
Minimal ground clearance 160 163
Panel van
Rear lift in height [mm] 559 675 Base tyres:
Driver‘s door step height [mm] 375 446 Front axle 235/65 R16C A2LH1/RWD 4x2/4100
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907643 14.12.2021
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Panel Van - Medium Wheelbase
Dimensions
We reserve all rights for are The
this drawing. subject to a may
drawing tolerance of up to +/- 3%.
neither
Cargo volume [m³] Turning clearance circle - curb to curb [m] 8,9 12,3 Euro
MP6 engine version T19 VI sliding door, left for homologation after configuration
the body has beenof your order.
mounted. be copied nor passed on to any third person.
Luggage area [m²] Gross vehicle weight [kg] N/A 5000 T93 loading compartment sliding door deleted
S02 driver seat - Optional
- The drawing is simplified to some equipment
extent and codes
is notnot listedbinding.
legally here, KW-codes and changes resulting
Luggage volume [l] Permissable front axle load [kg] N/A S04 adjustable1850 XZ0 seat
co-drivers model generation - Please check whether the fromdrawing
feasibility checks arecomplies
specification not included
with in
thethe drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Permissable
Turning clearance circle rear[m]
- curb to curb axle load [kg] 12,3 3500
T19 sliding door, left configuration of your -order.
Our instructions for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 5000 T93 loading compartment sliding door deleted - Optional equipment codes whennot planning to fitKW-codes
listed here, bodies of other than Mercedes-Benz
and changes resulting manufacture.
Permissable front axle load [kg] 1850 XZ0 model generation from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 - Our instructions for theAllmanufacture
dimensions refer to the standard
of superstructures version
must and the base tyres.
be observed,
laden unladen In laden
when planning to fit bodies of condition
other thanall axles are fullymanufacture.
Mercedes-Benz loaded (see table).
Vehicle height [mm] 2300 2422
Minimal ground clearance [mm] 173 176 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 594 720 Base tyres: In laden condition all axles are fully loaded (see table).
A2LH1/RWD 4x2/5000
Vehicle height [mm] Driver‘s door step height [mm]2300 2422 406 473 Front axle 195/75 R16C
Side [mm]
cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907653 14.12.2021
Minimal ground clearance 173 176
Panel van
Rear lift in height [mm] 594 720 Base tyres:
Driver‘s door step height [mm] 406 473 Front axle 195/75 R16C A2LH1/RWD 4x2/5000
Side cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907653 14.12.2021
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Panel Van - Long Wheelbase
Dimensions
We reserve all rights for are The
this drawing. subject to a may
drawing tolerance of up to +/- 3%.
neither
Cargo volume [m³] Turning clearance circle - curb to curb [m] 14 D03 high roof 14,4 S02 driver seat for homologation after configuration
the body has beenof your order.
mounted. be copied nor passed on to any third person.
Luggage area [m²] Gross vehicle weight [kg] N/A D93 omission3500 S04 adjustable co-drivers seat
of partition - Optional
- The drawing is simplified to some equipment
extent and codes
is notnot listedbinding.
legally here, KW-codes and changes resulting
Luggage volume [l] Permissable front axle load [kg] N/A 1860 Euro
MP6 engine version T19 VI sliding door, left - Please check whether the fromdrawing
feasibility checks arecomplies
specification not included
with in
thethe drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Permissable
Turning clearance circle rear[m]
- curb to curb axle load [kg] 14,4 S02 driver seat2250 T93 loading compartment sliding door deleted configuration of your -order.
Our instructions for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 3500 XZ0 seat
S04 adjustable co-drivers model generation - Optional equipment codes whennot planning to fitKW-codes
listed here, bodies of other than Mercedes-Benz
and changes resulting manufacture.
Permissable front axle load [kg] 1860 T19 sliding door, left from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2250 T93 loading compartment sliding door deleted - Our instructions for theAllmanufacture
dimensions refer to the standard
of superstructures version
must and the base tyres.
be observed,
laden unladen
XZ0 model generation In laden
when planning to fit bodies of condition
other thanall axles are fullymanufacture.
Mercedes-Benz loaded (see table).
Vehicle height [mm] 2541 2646
Minimal ground clearance [mm] 181 188 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 542 651 Base tyres: In laden condition all axles are fully loaded (see table).
A3LH2/RWD 4x2/3500
Vehicle height [mm] Driver‘s door step height [mm]2541 2646 379 428 Front axle 235/65 R16C
Side [mm]
cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907635 14.12.2021
Minimal ground clearance 181 188
Base tyres: Panel van
Rear lift in height [mm] 542 651
Driver‘s door step height [mm] 379 428 Front axle 235/65 R16C A3LH2/RWD 4x2/3500
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907635 14.12.2021
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Panel Van - Long Wheelbase
Dimensions
We reserve all rights for are The
this drawing. subject to a may
drawing tolerance of up to +/- 3%.
neither
Cargo volume [m³] Turning clearance circle - curb to curb [m] 14 D93 omission 14,4 S04 adjustable co-drivers seat
of partition for homologation after configuration
the body has beenof your order.
mounted. be copied nor passed on to any third person.
Luggage area [m²] Gross vehicle weight [kg] N/A 4100 Euro
MP6 engine version T19 VI sliding door, left - Optional
- The drawing is simplified to some equipment
extent and codes
is notnot listedbinding.
legally here, KW-codes and changes resulting
Luggage volume [l] Permissable front axle load [kg] N/A S02 driver seat1860 T93 loading compartment sliding door deleted - Please check whether the fromdrawing
feasibility checks arecomplies
specification not included
with in
thethe drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Permissable
Turning clearance circle rear[m]
- curb to curb axle load [kg] 14,4 S04 adjustable 2430 XZ0 seat
co-drivers model generation configuration of your -order.
Our instructions for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 4100 T19 sliding door, left - Optional equipment codes whennot planning to fitKW-codes
listed here, bodies of other than Mercedes-Benz
and changes resulting manufacture.
Permissable front axle load [kg] 1860 T93 loading compartment sliding door deleted from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2430 XZ0 model generation - Our instructions for theAllmanufacture
dimensions refer to the standard
of superstructures version
must and the base tyres.
be observed,
laden unladen In laden
when planning to fit bodies of condition
other thanall axles are fullymanufacture.
Mercedes-Benz loaded (see table).
Vehicle height [mm] 2558 2663
Minimal ground clearance [mm] 160 163 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 561 669 Base tyres: In laden condition all axles are fully loaded (see table).
A3LH2/RWD 4x2/4100
Vehicle height [mm] Driver‘s door step height [mm]2558 2663 374 438 Front axle 235/65 R16C
Side [mm]
cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907645 14.12.2021
Minimal ground clearance 160 163
Base tyres: Panel van
Rear lift in height [mm] 561 669
Driver‘s door step height [mm] 374 438 Front axle 235/65 R16C A3LH2/RWD 4x2/4100
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907645 14.12.2021
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Panel Van - Long Wheelbase
Dimensions
We reserve all rights for are The
this drawing. subject to a may
drawing tolerance of up to +/- 3%.
neither
Cargo volume [m³] Turning clearance circle - curb to curb [m] 13,9 D93 omission 14,3 S04 adjustable co-drivers seat
of partition for homologation after configuration
the body has beenof your order.
mounted. be copied nor passed on to any third person.
Luggage area [m²] Gross vehicle weight [kg] N/A 5000 Euro
MP6 engine version T19 VI sliding door, left - Optional
- The drawing is simplified to some equipment
extent and codes
is notnot listedbinding.
legally here, KW-codes and changes resulting
Luggage volume [l] Permissable front axle load [kg] N/A S02 driver seat1850 T93 loading compartment sliding door deleted - Please check whether the fromdrawing
feasibility checks arecomplies
specification not included
with in
thethe drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Permissable
Turning clearance circle rear[m]
- curb to curb axle load [kg] 14,3 S04 adjustable 3500 XZ0 seat
co-drivers model generation configuration of your -order.
Our instructions for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 5000 T19 sliding door, left - Optional equipment codes whennot planning to fitKW-codes
listed here, bodies of other than Mercedes-Benz
and changes resulting manufacture.
Permissable front axle load [kg] 1850 T93 loading compartment sliding door deleted from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 XZ0 model generation - Our instructions for theAllmanufacture
dimensions refer to the standard
of superstructures version
must and the base tyres.
be observed,
laden unladen In laden
when planning to fit bodies of condition
other thanall axles are fullymanufacture.
Mercedes-Benz loaded (see table).
Vehicle height [mm] 2595 2706
Minimal ground clearance [mm] 173 176 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 595 713 Base tyres: In laden condition all axles are fully loaded (see table).
A3LH2/RWD 4x2/5000
Vehicle height [mm] Driver‘s door step height [mm]2595 2706 405 462 Front axle 195/75 R16C
Side [mm]
cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907655 14.12.2021
Minimal ground clearance 173 176
Base tyres: Panel van
Rear lift in height [mm] 595 713
Driver‘s door step height [mm] 405 462 Front axle 195/75 R16C A3LH2/RWD 4x2/5000
Side cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907655 14.12.2021
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Panel Van - Extra Long Wheelbase
Dimensions
We reserve all rights for are The
this drawing. subject to a tolerance
drawing of up to +/- 3%.
may neither
Cargo volume [m³] Turning clearance circle - curb to curb [m] 15,5 D03 high roof 14,4 S02 driver seat for homologation afterconfiguration
the body has of yourmounted.
been order. be copied nor passed on to any third person.
Luggage area [m²] Gross vehicle weight [kg] N/A D93 omission3500 S04 adjustable co-drivers seat
of partition - Optional
- The drawing is simplified to some equipment
extent and codes notlegally
is not listedbinding.
here, KW-codes and changes resulting
Luggage volume [l] Permissable front axle load [kg] N/A 1860 Euro
MP6 engine version T19 VI sliding door, left - Please check whether from feasibility
the drawing checks arecomplies
specification not included
with in the
the drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Permissable
Turning clearance circle rear[m]
- curb to curb axle load [kg] 14,4 S02 driver seat2250 T93 loading compartment sliding door deleted configuration of your -order.
Our instructions for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 3500 XZ0 seat
S04 adjustable co-drivers model generation - Optional equipment codes whennot planning to fit KW-codes
listed here, bodies of other than Mercedes-Benz
and changes resulting manufacture.
Permissable front axle load [kg] 1860 T19 sliding door, left from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2250 T93 loading compartment sliding door deleted - Our instructions for theAll manufacture
dimensions refer to the standard
of superstructures version
must and the base tyres.
be observed,
laden unladen
XZ0 model generation In laden
when planning to fit bodies of condition
other thanallMercedes-Benz
axles are fully manufacture.
loaded (see table).
Vehicle height [mm] 2542 2643
Minimal ground clearance [mm] 181 188 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 543 647 Base tyres: In laden condition all axles are fully loaded (see table).
A4LH2/RWD 4x2/3500
Vehicle height [mm] Driver‘s door step height [mm]2542 2643 379 430 Front axle 235/65 R16C
Side cargo N/A Rear axle 235/65 R16C 907637 14.12.2021
Minimal ground clearance [mm] step height [mm] 181 188 N/A
Base tyres: Panel van
Rear lift in height [mm] 543 647
Driver‘s door step height [mm] 379 430 Front axle 235/65 R16C A4LH2/RWD 4x2/3500
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907637 14.12.2021
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Panel Van - Extra Long Wheelbase
Dimensions
We reserve all rights for are The
this drawing. subject to a tolerance
drawing of up to +/- 3%.
may neither
Cargo volume [m³] Turning clearance circle - curb to curb [m] 15,5 D93 omission 14,4 S04 adjustable co-drivers seat
of partition for homologation afterconfiguration
the body has of yourmounted.
been order. be copied nor passed on to any third person.
Luggage area [m²] Gross vehicle weight [kg] N/A 4100 Euro
MP6 engine version T19 VI sliding door, left - Optional
- The drawing is simplified to some equipment
extent and codes notlegally
is not listedbinding.
here, KW-codes and changes resulting
Luggage volume [l] Permissable front axle load [kg] N/A S02 driver seat1860 T93 loading compartment sliding door deleted - Please check whether from feasibility
the drawing checks arecomplies
specification not included
with in the
the drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Permissable
Turning clearance circle rear[m]
- curb to curb axle load [kg] 14,4 S04 adjustable 2430 XZ0 seat
co-drivers model generation configuration of your -order.
Our instructions for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 4100 T19 sliding door, left - Optional equipment codes whennot planning to fit KW-codes
listed here, bodies of other than Mercedes-Benz
and changes resulting manufacture.
Permissable front axle load [kg] 1860 T93 loading compartment sliding door deleted from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2430 XZ0 model generation - Our instructions for theAll manufacture
dimensions refer to the standard
of superstructures version
must and the base tyres.
be observed,
laden unladen In laden
when planning to fit bodies of condition
other thanallMercedes-Benz
axles are fully manufacture.
loaded (see table).
Vehicle height [mm] 2561 2662
Minimal ground clearance [mm] 160 162 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 564 667 Base tyres: In laden condition all axles are fully loaded (see table).
A4LH2/RWD 4x2/4100
Vehicle height [mm] Driver‘s door step height [mm]2561 2662 374 439 Front axle 235/65 R16C
Side cargo N/A Rear axle 235/65 R16C 907647 14.12.2021
Minimal ground clearance [mm] step height [mm] 160 162 N/A
Base tyres: Panel van
Rear lift in height [mm] 564 667
Driver‘s door step height [mm] 374 439 Front axle 235/65 R16C A4LH2/RWD 4x2/4100
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907647 14.12.2021
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Panel Van - Extra Long Wheelbase
Dimensions
We reserve all rights for are The
this drawing. subject to a tolerance
drawing of up to +/- 3%.
may neither
Cargo volume [m³] Turning clearance circle - curb to curb [m] 15,4 D93 omission 14,3 S04 adjustable co-drivers seat
of partition for homologation afterconfiguration
the body has of yourmounted.
been order. be copied nor passed on to any third person.
Luggage area [m²] Gross vehicle weight [kg] N/A 5000 Euro
MP6 engine version T19 VI sliding door, left - Optional
- The drawing is simplified to some equipment
extent and codes notlegally
is not listedbinding.
here, KW-codes and changes resulting
Luggage volume [l] Permissable front axle load [kg] N/A S02 driver seat1850 T93 loading compartment sliding door deleted - Please check whether from feasibility
the drawing checks arecomplies
specification not included
with in the
the drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Permissable
Turning clearance circle rear[m]
- curb to curb axle load [kg] 14,3 S04 adjustable 3500 XZ0 seat
co-drivers model generation configuration of your -order.
Our instructions for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 5000 T19 sliding door, left - Optional equipment codes whennot planning to fit KW-codes
listed here, bodies of other than Mercedes-Benz
and changes resulting manufacture.
Permissable front axle load [kg] 1850 T93 loading compartment sliding door deleted from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 XZ0 model generation - Our instructions for theAll manufacture
dimensions refer to the standard
of superstructures version
must and the base tyres.
be observed,
laden unladen In laden
when planning to fit bodies of condition
other thanallMercedes-Benz
axles are fully manufacture.
loaded (see table).
Vehicle height [mm] 2596 2703
Minimal ground clearance [mm] 173 176 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 598 709 Base tyres: In laden condition all axles are fully loaded (see table).
A4LH2/RWD 4x2/5000
Vehicle height [mm] Driver‘s door step height [mm]2596 2703 405 464 Front axle 195/75 R16C
Side cargo N/A Rear axle 195/75 R16C 907657 14.12.2021
Minimal ground clearance [mm] step height [mm] 173 176 N/A
Base tyres: Panel van
Rear lift in height [mm] 598 709
Driver‘s door step height [mm] 405 464 Front axle 195/75 R16C A4LH2/RWD 4x2/5000
Side cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907657 14.12.2021
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Sprinter Cab Chassis & Dual Cab Chassis
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Standard equipment (1,7) Cab Chassis (RWD) | Dual Cab Chassis (RWD)
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Data (3) RWD Cab Chassis | Euro VI | 4.49t
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Data (3) RWD Cab Chassis | Euro VI | 5.0t
Designation VS30 Sprinter HD 5.0t
Body Style RWD Single Cab Chassis
Variant 517 MWB 519 MWB 517 LWB 519 LWB
Model Type / Baumuster 90715323-AEA 90715323-AFA 90715523-AEA 90715523-AFA
Engine 654 654 654 642
Capacity [cc] 1950 1950 1950 1950
Max. Power [kW] 125 140 125 140
Fuel Capacity [liter] 71 71 71 71
Length [mm] 6104 6104 6864 6864
Width [mm] 2020 2020 2020 2020
Height [mm] 2360 2360 2351 2351
Ground Clearance [mm] 176 176 176 176
Wheelbase [mm] 3665 3665 4325 4325
Overhang [mm] 1418 1418 1518 1518
Transmission 9G-TRONIC AT 9G-TRONIC AT 9G-TRONIC AT 9G-TRONIC AT
Axle Ratio 4,727 4,727 4,727 4,727
Maximum Towing [kg] 3500 3500 3500 3500
GCM* [kg] 7000 7000 7000 7000
GVM* [kg] 5000 5000 5000 5000
Front Axle Mass Limit* [kg] 1850 1850 1850 1850
Rear Axle Mass Limit [kg] 3500 3500 3500 3500
Payload* [kg] 2924 2919 2884 2879
Unladen Mass* [kg] 2076 2081 2116 2121
EU Kerb Mass* [kg] 2145 2150 2185 2190
Tare Mass* [kg] 2025 2030 2065 2070
Body Style RWD Single Cab with Factory Tray
Length [mm] 6246 6246 6946 6946
Width [mm] 2199 2199 2199 2199
Height (std) [mm] 2348 2348 2337 2337
Overhang [mm] 1560 1560 1600 1600
* Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any. NOTE:
Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo. Mass variations (mass ranges provided depend upon individual model - see your dealer for more information if required).
Front Axle Mass Limit without A50. Factory Tray option increases kerb mass by 300-500 kg.
Payload = GVM - Unladen mass Factory Tray option decreases payload by 300-500 kg.
Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants All-wheel Drive option will increase the kerb mass and decrease the payload accordingly.
EU Kerb Mass = Mass of vehicle with a 75kg driver, 90% fuel and 100% of all other fluids
Tare Mass = 10 litres fuel, no occupants
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Data (3) RWD Dual Cab Chassis | Euro VI | 4.49t
Designation VS30 Sprinter 4.49t
Body Style RWD Single Cab Chassis
Variant 517 MWB 519 MWB 517 LWB 519 LWB
Model Type / Baumuster 90725323-AED 90725323-AFD 90725523-AED 90725523-AFD
Engine 654 654 654 654
Capacity [cc] 1950 1950 1950 1950
Max. Power [kW] 125 140 125 140
Fuel Capacity [liter] 71 71 71 71
Length [mm] 6104 6104 6864 6864
Width [mm] 2020 2020 2020 2020
Height [mm] 2358 2358 2345 2345
Ground Clearance [mm] 176 176 176 176
Wheelbase [mm] 3665 3665 4325 4325
Overhang [mm] 1418 1418 1518 1518
Transmission 9G-TRONIC AT 9G-TRONIC AT 9G-TRONIC AT 9G-TRONIC AT
Axle Ratio 4,727 4,727 4,727 4,727
Maximum Towing [kg] 3500 3500 3500 3500
GCM* [kg] 6490 6490 6490 6490
GVM* [kg] 4490 4490 4490 4490
Front Axle Mass Limit* [kg] 1850 1850 1850 1850
Rear Axle Mass Limit [kg] 3200 3200 3200 3200
Payload* [kg] 2241 2236 2201 2196
Unladen Mass* [kg] 2249 2254 2289 2294
EU Kerb Mass* [kg] 2318 2323 2358 2363
Tare Mass* [kg] 2198 2203 2238 2243
Body Style RWD Dual Cab Chassis with Factory Tray
Length [mm] 6156 6156 7056 7056
Width [mm] 2199 2199 2199 2199
Height (std) [mm] 2345 2345 2332 2332
Overhang [mm] 1470 1470 1710 1710
* Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any. NOTE:
Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo. Mass variations (mass ranges provided depend upon individual model - see your dealer for more information if required).
Front Axle Mass Limit without A50. Factory Tray option increases kerb mass by 300-500 kg.
Payload = GVM - Unladen mass Factory Tray option decreases payload by 300-500 kg.
Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants
EU Kerb Mass = Mass of vehicle with a 75kg driver, 90% fuel and 100% of all other fluids
Tare Mass = 10 litres fuel, no occupants
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Data (3) RWD Dual Cab Chassis | Euro VI | 5.0t
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Cab Chassis - Medium Wheelbase
RWD, 4.49t and 5t, without factory tray Dimensions & weights:
Cargo area [m²]
Cargo volume [m³]
Luggage area [m²]
Luggage volume [l]
N/A S02 driver seat
N/A S23 two-seater passenger seat
Optional equipment:
N/A MP6 engine N/A versionXZ0 model generation
Euro VI -
for homologation after the body has been mounted.
Important notes: - The drawing is simplified to some extent and is not legally binding.
Please check whether the drawing specification
- It is the responsibility of the bodybuilder to ensure that the vehicle is suitablecomplies with the chassis
be copied nor passed on to any third person.
Dimensions & weights: Optional equipment: Dimensions & weights:Important notes: Optional equipment: Important notes:
Cargo area [m²] N/A MP6 engine version Euro VI Cargo area [m²] - It is the responsibility of the bodybuilder to ensure MP6theengine
N/A that vehicleversion Euro VI We reserve all rights for this drawing. The drawing
is suitable - It is the
mayresponsibility
neither of the bodybuilder to ensure that the vehicle is suitable We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] N/A S02 driver seat Cargo volume [m³] for homologation after the body has been mounted. N/A S02 driver seat be copied nor passed on to any third person.for homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S23 two-seater passenger seat Luggage area [m²] - The drawing is simplified to some extent and N/A is not S23
legally two-seater
binding. passenger seat - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A XZ0 model generation Luggage volume [l] - Please check whether the drawing specification N/A XZ0 with
complies model thegeneration
chassis Dimensions are subject to a tolerance of up- to Please check whether the drawing specification complies with the chassis
+/- 3%. Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 12,3 Turning clearance circle - curb to curb
configuration [m]order.
of your 12,3 configuration of your order.
Gross vehicle weight [kg] 5000 Gross vehicle weight [kg]
- Optional 5000 and changes resulting
equipment codes not listed here, KW-codes - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1850 Permissable front axle load
from [kg]
feasibility 1850
checks are not included in the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 Permissable rear axle load
- Our [kg]
instructions 3500 Dimensions
for the manufacture of superstructures & weights:
must be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 7,703 MP6 whenengine version
planning to fitEuro VI of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
bodies We reserve all rights for this drawing. The drawing may neither
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Cab Chassis - Long Wheelbase
RWD, 4.49t and 5t, without factory tray Cargo area [m²]
Cargo volume [m³]
Dimensions & weights: Luggage area [m²]
Luggage volume [l] N/A
N/A S02 driver seat
N/A S23 two-seater passenger seat
Optional equipment:
N/AEuro
MP6 engine version XZ0VI model generation
Important notes:
-
for homologation after the body has been mounted.
- The drawing is simplified to some extent and is not legally binding.
Please check whether the drawing specification
- It is the responsibility of the bodybuilder to ensure that the vehicle is suitable complies with the chassis
be copied nor passed on to any third person.
Dimensions & weights: Optional equipment: Dimensions & weights:Important notes: Optional equipment: Important notes:
Cargo area [m²] N/A MP6 engine version Euro VI Cargo area [m²] - It is the responsibility of the bodybuilder to ensure N/A thatMP6theengine
vehicleversion Euro VI We reserve all rights for this drawing. The drawing
is suitable - It is the
mayresponsibility
neither of the bodybuilder to ensure that the vehicle is suitable We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] N/A S02 driver seat Cargo volume [m³] for homologation after the body has been mounted. N/A S02 driver seat be copied nor passed on to any third person.for homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S23 two-seater passenger seat Luggage area [m²] - The drawing is simplified to some extent and N/A S23 two-seater
is not legally binding. passenger seat - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A XZ0 model generation Luggage volume [l] - Please check whether the drawing specification N/A XZ0 with
complies modelthegeneration
chassis Dimensions are subject to a tolerance of up- to Please check whether the drawing specification complies with the chassis
+/- 3%. Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 14,3 Turning clearance circle - curb to curb
configuration [m]order.
of your 14,3 configuration of your order.
Gross vehicle weight [kg] 5000 Gross vehicle weight [kg]
- Optional 5000 and changes resulting
equipment codes not listed here, KW-codes - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1850 Permissable front axle load
from [kg]
feasibility 1850
checks are not included in the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 Permissable rear axle load
- Our [kg]
instructions 3500 Dimensions
for the manufacture of superstructures & weights:
must be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 9,198 MP6 whenengine version
planning to fitEuro VI of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
bodies We reserve all rights for this drawing. The drawing may neither
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Dual Cab Chassis - Medium Wheelbase
RWD, 4.49t and 5t, without factory tray Dimensions & weights:
Cargo area [m²]
Cargo volume [m³]
Luggage area [m²]
Luggage volume [l] N/A
N/A S02 driver seat
N/A S04 adjustable co-drivers seat
Optional equipment:
N/A XZ0
MP6 engine version Euro VImodel generation
Important notes:
-
for homologation after the body has been mounted.
- The drawing is simplified to some extent and is not legally binding.
Please check whether the drawing specification
- It is the responsibility of the bodybuilder to ensure that the vehicle is suitable complies with the chassis
be copied nor passed on to any third person.
Dimensions & weights: Optional equipment: Dimensions & weights:Important notes: Optional equipment: Important notes:
Cargo area [m²] N/A MP6 engine version Euro VI Cargo area [m²] - It is the responsibility of the bodybuilder toN/A ensureMP6that engine version
the vehicle Euro VI
is suitable We reserve all rights for this drawing. The- Itdrawing
is the responsibility
may neither of the bodybuilder to ensure that the vehicle is suitable We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] N/A S02 driver seat Cargo volume [m³] N/A S02 driver seat
for homologation after the body has been mounted. be copied nor passed on to any third person. for homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S04 adjustable co-drivers seat Luggage area [m²] - The drawing is simplified to some extent and N/A S04
is not adjustable
legally binding.co-drivers seat - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A XZ0 model generation Luggage volume [l] - Please check whether the drawing specification N/A complies
XZ0 model withgeneration
the chassis Dimensions are subject to a tolerance of -up Please
to +/-check
3%. whether the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 12,3 Turning clearance circleconfiguration
- curb to curbof[m]
your order. 12,3 configuration of your order.
Gross vehicle weight [kg] 5000 Gross vehicle weight [kg]
- Optional equipment codes not listed here,5000 KW-codes and changes resulting - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1850 Permissable front axle load
from[kg] 1850
feasibility checks are not included in the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 Permissable rear axle -load
Our [kg] 3500 Dimensions
instructions for the manufacture of superstructures must be& weights:
observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 5,782 MP6 whenengine version
planning to fitEuro VI of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
bodies We reserve all rights for this drawing. The drawing may neither
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Dual Cab Chassis - Long Wheelbase
RWD, 4.49t and 5t, without factory tray Cargo area [m²]
Cargo volume [m³]
Dimensions & weights: Luggage area [m²]
Luggage volume [l] N/A
N/A S02 driver seat
N/A S04 adjustable co-drivers seat
Optional equipment:
N/AEuro
MP6 engine version XZ0VI model generation
Important notes:
-
for homologation after the body has been mounted.
- The drawing is simplified to some extent and is not legally binding.
Please check whether the drawing specification
- It is the responsibility of the bodybuilder to ensure that the vehicle is suitable complies with the chassis
be copied nor passed on to any third person.
Dimensions & weights: Optional equipment: Dimensions & weights:Important notes: Optional equipment: Important notes:
Cargo area [m²] N/A MP6 engine version Euro VI Cargo area [m²] - It is the responsibility of the bodybuilder to ensure N/A thatMP6theengine
vehicleversion Euro VI We reserve all rights for this drawing. The drawing
is suitable - It is the
mayresponsibility
neither of the bodybuilder to ensure that the vehicle is suitable We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] N/A S02 driver seat Cargo volume [m³] for homologation after the body has been mounted. N/A S02 driver seat be copied nor passed on to any third person.for homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S04 adjustable co-drivers seat Luggage area [m²] - The drawing is simplified to some extent and N/A is not S04
legally adjustable
binding. co-drivers seat - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A XZ0 model generation Luggage volume [l] - Please check whether the drawing specification N/A XZ0 with
complies modelthegeneration
chassis Dimensions are subject to a tolerance of up- to Please check whether the drawing specification complies with the chassis
+/- 3%. Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 14,3 Turning clearance circle - curb to curb
configuration [m]order.
of your 14,3 configuration of your order.
Gross vehicle weight [kg] 5000 Gross vehicle weight [kg]
- Optional 5000 and changes resulting
equipment codes not listed here, KW-codes - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1850 Permissable front axle load
from [kg]
feasibility 1850
checks are not included in the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 Permissable rear axle load
- Our [kg]
instructions 3500 Dimensions
for the manufacture of superstructures & weights:
must be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 7,703 MP6 whenengine version
planning to fitEuro VI of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
bodies We reserve all rights for this drawing. The drawing may neither
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Sprinter Transfer Minibus
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Standard equipment (1,7) Transfer Minibus (RWD)
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Data (3) RWD Transfer Minibus | Euro VI | 4.10t
* Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any. NOTE:
Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo. Mass variations (mass ranges provided depend upon individual model - see your dealer for more information if required)
Front Axle Mass Limit without A50.
Payload = GVM - Unladen mass
Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants
EU Kerb Mass = Mass of vehicle with a 75kg driver, 90% fuel and 100% of all other fluids
Tare Mass = 10 litres fuel, no occupants
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Transfer Minibus - Medium Wheelbase
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Technical Drawings (6) RWD Transfer Minibus - Medium Wheelbase
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Colours and Upholstery Sprinter
Non-metallic paints
NOT PICTURED
Broom Yellow (12121)
Traffic Red (3620)
Brilliant Blue (5362)
Stone Grey (7160)
Arctic White (9147) Jupiter Red (3589) Steel Blue (5389) Blue Grey (7709) Jet Black (9040)
(Standard for all trims)
Metallic paints
Cavansite Blue (5890) Selenite Grey (7992) Iridium Silver (9775) Obsidian Black (9197) Tenorite Grey (7755)
Interior upholstery
Manufacturer's Recommended List Price excludes dealer delivery and on road costs.
Sprinter Technical Data | Model Year 2022 41
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
Appendix Disclaimers
1
arious safety systems and features included in Mercedes-Benz vehicles are driver assistance aids only and the driver at all times remains solely responsible for maintaining proper control
V
of the vehicle, ensuring safety and monitoring the driving environment and complying with all applicable road rules.
2
arranty: Warranty is applicable to new Mercedes-Benz Sprinter vehicles for 5 years from the date of first registration or until the vehicle has travelled 250,000 kilometers, (whichever occurs
W
first). Warranty start time may differ for demonstrator vehicles. 12V battery warranty is 3 years/250,000km whichever occurs first. Excludes customers with specific warranty arrangements
with Mercedes-Benz. For full terms, conditions and exclusions please refer to the warranty statement here
www.mercedes-benz.com.au/vans/en/ownership/service-and-maintenance/warranty.
Roadside Assist: Mercedes-Benz Road Care is available for the duration of any Mercedes-Benz New Vehicle Warranty Period whilst the warranty remains valid against your vehicle.
Terms, condition and exclusions apply. For further information visit your authorised retailer.
3
ll figures, images and values shown are indicative and are intended as a guide only. Unless otherwise stated, figures and values are calculated on basic specification vehicles in unladen
A
conditions. Actual figures and values may vary and are influenced by many additional factors such as optional equipment. Weight tolerance of +/- 5% in production. Customers should make
additional enquiries based on the specifics of their vehicle to obtain accurate figures and values.
4
hone and internet compatibility, connectivity and capabilities differ between devices, markets and vehicles. Check the compatibility of your device and vehicle in Australia at
P
www.mercedes-benz-mobile.com. Data plan required for internet connection.
5
nless stated otherwise, all applications, multimedia, connectivity and software solutions (Applications and Data Content) contained within or associated with the vehicle are licenced to users
U
subject to terms and conditions. In some cases, the Applications and Data Content may be provided by third parties, not Mercedes-Benz Australia/Pacific Pty Ltd (MBAuP) and may be subject
to third party terms and conditions. Whilst MBAuP shall use its reasonable endeavours to provide an uninterrupted experience, we cannot guarantee ongoing or uninterrupted supply noting
that such services may subject to interruption, change, discontinuance or limitations. Please refer to the relevant terms and conditions for more information including device compatibility,
connectivity and capability requirements.
6
ll figures in millimetres. They are indicative figures only based on basic specification vehicles and in unladen condition. Actual figures and values may vary and are influenced by many
A
additional factors such as optional equipment. Customers should make additional enquiries based on the specifics of their vehicle to obtain accurate figures.
7
ercedes-Benz Van products manufactured from 1 November 2021 onwards may be missing some or all of the following driver assistance and safety systems/features: Active Brake
M
Assist, Active Distance Assist DISTRONIC and Blind Spot Assist which includes Rear Cross Traffic Alert Exit Warning. Driver assistance and safety systems/features included in Mercedes-
Benz vehicles are driver assistance aids only and the driver at all times remains solely responsible for maintaining proper control of the vehicle, ensuring safety and monitoring the driving
environment and complying with all applicable laws including but not limited to road rules (eg: adjusting the speed of the vehicle in accordance with the designated speed limits).
PANEL VAN CAB CHASSIS CAB CHASSIS CAB CHASSIS TRANSFER TRANSFER TRANSFER SPRINTER
THE VS30 PANEL VAN PANEL VAN
MBUX SAFETY FEATURES TECHNICAL DUAL CAB CHASSIS DUAL CAB CHASSIS DUAL CAB CHASSIS MINIBUS MINIBUS MINIBUS COLOURS &
RANGE STD. EQUIPM. TECHNICAL DATA
DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS STD. EQUIPM. TECHNICAL DATA TECH. DRAWINGS UPHOLSTERY
IMPORTANT! This brochure has been compiled by Mercedes-Benz Australia/Pacific Pty Ltd to provide a general indication of the models available in Australia. Some of the features, optional extras
and/or colours shown may not be available in Australia or may only be available in a different specification. Additionally, some models, features, optional extras and/or colours may only be available
in combination with others. Some equipment depicted either on vehicle illustrations or separately may be non standard or options and may, where applicable, be available at an additional cost. For
current information on the availability, design features and prices of all models, features, optional extras and/or colours available in Australia, you should contact your authorised Mercedes-Benz
Vans Retailer. All of the information contained in this brochure was correct as at March 2022. However, the manufacturer reserves the right to discontinue, make changes to design and
specifications to vehicles or optional equipment without notice.
This publication and its text, images, graphics and their arrangements are the property of Mercedes-Benz Australia/Pacific Pty Ltd ©.
Mercedes-Benz Australia/Pacific Pty Ltd, 44 Lexia Place, Mulgrave, 3170 Victoria, Australia.